All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ray Jui <ray.jui@broadcom.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Ray Jui <ray.jui@broadcom.com>
Subject: [PATCH 2/6] PCI: iproc: Add INTx support with better modeling
Date: Tue, 29 May 2018 14:58:46 -0700	[thread overview]
Message-ID: <1527631130-20045-3-git-send-email-ray.jui@broadcom.com> (raw)
In-Reply-To: <1527631130-20045-1-git-send-email-ray.jui@broadcom.com>

Add PCIe legacy interrupt INTx support to the iProc PCIe driver by
modeling it with its own IRQ domain. All 4 interrupts INTA, INTB, INTC,
INTD share the same interrupt line connected to the GIC in the system,
while the status of each INTx can be obtained through the INTX CSR
register

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 drivers/pci/host/pcie-iproc-platform.c |  2 +
 drivers/pci/host/pcie-iproc.c          | 95 +++++++++++++++++++++++++++++++++-
 drivers/pci/host/pcie-iproc.h          |  6 +++
 3 files changed, 101 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pcie-iproc-platform.c b/drivers/pci/host/pcie-iproc-platform.c
index e764a2a..7a51e6c 100644
--- a/drivers/pci/host/pcie-iproc-platform.c
+++ b/drivers/pci/host/pcie-iproc-platform.c
@@ -70,6 +70,8 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 	}
 	pcie->base_addr = reg.start;
 
+	pcie->irq = platform_get_irq(pdev, 0);
+
 	if (of_property_read_bool(np, "brcm,pcie-ob")) {
 		u32 val;
 
diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 14f374d..0bd2c14 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/irqchip/arm-gic-v3.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/platform_device.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
@@ -264,6 +265,7 @@ enum iproc_pcie_reg {
 
 	/* enable INTx */
 	IPROC_PCIE_INTX_EN,
+	IPROC_PCIE_INTX_CSR,
 
 	/* outbound address mapping */
 	IPROC_PCIE_OARR0,
@@ -305,6 +307,7 @@ static const u16 iproc_pcie_reg_paxb_bcma[] = {
 	[IPROC_PCIE_CFG_ADDR]		= 0x1f8,
 	[IPROC_PCIE_CFG_DATA]		= 0x1fc,
 	[IPROC_PCIE_INTX_EN]		= 0x330,
+	[IPROC_PCIE_INTX_CSR]		= 0x334,
 	[IPROC_PCIE_LINK_STATUS]	= 0xf0c,
 };
 
@@ -316,6 +319,7 @@ static const u16 iproc_pcie_reg_paxb[] = {
 	[IPROC_PCIE_CFG_ADDR]		= 0x1f8,
 	[IPROC_PCIE_CFG_DATA]		= 0x1fc,
 	[IPROC_PCIE_INTX_EN]		= 0x330,
+	[IPROC_PCIE_INTX_CSR]		= 0x334,
 	[IPROC_PCIE_OARR0]		= 0xd20,
 	[IPROC_PCIE_OMAP0]		= 0xd40,
 	[IPROC_PCIE_OARR1]		= 0xd28,
@@ -332,6 +336,7 @@ static const u16 iproc_pcie_reg_paxb_v2[] = {
 	[IPROC_PCIE_CFG_ADDR]		= 0x1f8,
 	[IPROC_PCIE_CFG_DATA]		= 0x1fc,
 	[IPROC_PCIE_INTX_EN]		= 0x330,
+	[IPROC_PCIE_INTX_CSR]		= 0x334,
 	[IPROC_PCIE_OARR0]		= 0xd20,
 	[IPROC_PCIE_OMAP0]		= 0xd40,
 	[IPROC_PCIE_OARR1]		= 0xd28,
@@ -782,9 +787,90 @@ static int iproc_pcie_check_link(struct iproc_pcie *pcie)
 	return link_is_active ? 0 : -ENODEV;
 }
 
-static void iproc_pcie_enable(struct iproc_pcie *pcie)
+static int iproc_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+			       irq_hw_number_t hwirq)
 {
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops intx_domain_ops = {
+	.map = iproc_pcie_intx_map,
+};
+
+static void iproc_pcie_isr(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct iproc_pcie *pcie;
+	struct device *dev;
+	unsigned long status;
+	u32 bit, virq;
+
+	chained_irq_enter(chip, desc);
+	pcie = irq_desc_get_handler_data(desc);
+	dev = pcie->dev;
+
+	/* go through INTx A, B, C, D until all interrupts are handled */
+	while ((status = iproc_pcie_read_reg(pcie, IPROC_PCIE_INTX_CSR) &
+		SYS_RC_INTX_MASK) != 0) {
+		for_each_set_bit(bit, &status, PCI_NUM_INTX) {
+			virq = irq_find_mapping(pcie->irq_domain, bit + 1);
+			if (virq)
+				generic_handle_irq(virq);
+			else
+				dev_err(dev, "unexpected INTx%u\n", bit);
+		}
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int iproc_pcie_intx_enable(struct iproc_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	struct device_node *node = dev->of_node;
+	int ret;
+
 	iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK);
+
+	/*
+	 * BCMA devices do not map INTx the same way as platform devices. All
+	 * BCMA needs is the above code to enable INTx
+	 */
+	if (pcie->irq <= 0)
+		return 0;
+
+	/* set IRQ handler */
+	irq_set_chained_handler_and_data(pcie->irq, iproc_pcie_isr, pcie);
+
+	/* add IRQ domain for INTx */
+	pcie->irq_domain = irq_domain_add_linear(node, PCI_NUM_INTX + 1,
+						 &intx_domain_ops, pcie);
+	if (!pcie->irq_domain) {
+		dev_err(dev, "failed to add INTx IRQ domain\n");
+		ret = -ENOMEM;
+		goto err_rm_handler_data;
+	}
+
+	return 0;
+
+err_rm_handler_data:
+	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
+
+	return ret;
+}
+
+static void iproc_pcie_intx_disable(struct iproc_pcie *pcie)
+{
+	iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, 0x0);
+
+	if (pcie->irq <= 0)
+		return;
+
+	irq_domain_remove(pcie->irq_domain);
+	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
 }
 
 static inline bool iproc_pcie_ob_is_valid(struct iproc_pcie *pcie,
@@ -1410,7 +1496,11 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 		goto err_power_off_phy;
 	}
 
-	iproc_pcie_enable(pcie);
+	ret = iproc_pcie_intx_enable(pcie);
+	if (ret) {
+		dev_err(dev, "failed to enable INTx\n");
+		goto err_power_off_phy;
+	}
 
 	if (IS_ENABLED(CONFIG_PCI_MSI))
 		if (iproc_pcie_msi_enable(pcie))
@@ -1455,6 +1545,7 @@ int iproc_pcie_remove(struct iproc_pcie *pcie)
 	pci_remove_root_bus(pcie->root_bus);
 
 	iproc_pcie_msi_disable(pcie);
+	iproc_pcie_intx_disable(pcie);
 
 	phy_power_off(pcie->phy);
 	phy_exit(pcie->phy);
diff --git a/drivers/pci/host/pcie-iproc.h b/drivers/pci/host/pcie-iproc.h
index 67081cb..cbcaf9d 100644
--- a/drivers/pci/host/pcie-iproc.h
+++ b/drivers/pci/host/pcie-iproc.h
@@ -72,6 +72,9 @@ struct iproc_msi;
  * @ib: inbound mapping related parameters
  * @ib_map: outbound mapping region related parameters
  *
+ * @irq: interrupt line wired to the generic GIC for INTx
+ * @irq_domain: IRQ domain for INTx
+ *
  * @need_msi_steer: indicates additional configuration of the iProc PCIe
  * controller is required to steer MSI writes to external interrupt controller
  * @msi: MSI data
@@ -99,6 +102,9 @@ struct iproc_pcie {
 	struct iproc_pcie_ib ib;
 	const struct iproc_pcie_ib_map *ib_map;
 
+	int irq;
+	struct irq_domain *irq_domain;
+
 	bool need_msi_steer;
 	struct iproc_msi *msi;
 };
-- 
2.1.4

WARNING: multiple messages have this Message-ID (diff)
From: ray.jui@broadcom.com (Ray Jui)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] PCI: iproc: Add INTx support with better modeling
Date: Tue, 29 May 2018 14:58:46 -0700	[thread overview]
Message-ID: <1527631130-20045-3-git-send-email-ray.jui@broadcom.com> (raw)
In-Reply-To: <1527631130-20045-1-git-send-email-ray.jui@broadcom.com>

Add PCIe legacy interrupt INTx support to the iProc PCIe driver by
modeling it with its own IRQ domain. All 4 interrupts INTA, INTB, INTC,
INTD share the same interrupt line connected to the GIC in the system,
while the status of each INTx can be obtained through the INTX CSR
register

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
 drivers/pci/host/pcie-iproc-platform.c |  2 +
 drivers/pci/host/pcie-iproc.c          | 95 +++++++++++++++++++++++++++++++++-
 drivers/pci/host/pcie-iproc.h          |  6 +++
 3 files changed, 101 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pcie-iproc-platform.c b/drivers/pci/host/pcie-iproc-platform.c
index e764a2a..7a51e6c 100644
--- a/drivers/pci/host/pcie-iproc-platform.c
+++ b/drivers/pci/host/pcie-iproc-platform.c
@@ -70,6 +70,8 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 	}
 	pcie->base_addr = reg.start;
 
+	pcie->irq = platform_get_irq(pdev, 0);
+
 	if (of_property_read_bool(np, "brcm,pcie-ob")) {
 		u32 val;
 
diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 14f374d..0bd2c14 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/irqchip/arm-gic-v3.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/platform_device.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
@@ -264,6 +265,7 @@ enum iproc_pcie_reg {
 
 	/* enable INTx */
 	IPROC_PCIE_INTX_EN,
+	IPROC_PCIE_INTX_CSR,
 
 	/* outbound address mapping */
 	IPROC_PCIE_OARR0,
@@ -305,6 +307,7 @@ static const u16 iproc_pcie_reg_paxb_bcma[] = {
 	[IPROC_PCIE_CFG_ADDR]		= 0x1f8,
 	[IPROC_PCIE_CFG_DATA]		= 0x1fc,
 	[IPROC_PCIE_INTX_EN]		= 0x330,
+	[IPROC_PCIE_INTX_CSR]		= 0x334,
 	[IPROC_PCIE_LINK_STATUS]	= 0xf0c,
 };
 
@@ -316,6 +319,7 @@ static const u16 iproc_pcie_reg_paxb[] = {
 	[IPROC_PCIE_CFG_ADDR]		= 0x1f8,
 	[IPROC_PCIE_CFG_DATA]		= 0x1fc,
 	[IPROC_PCIE_INTX_EN]		= 0x330,
+	[IPROC_PCIE_INTX_CSR]		= 0x334,
 	[IPROC_PCIE_OARR0]		= 0xd20,
 	[IPROC_PCIE_OMAP0]		= 0xd40,
 	[IPROC_PCIE_OARR1]		= 0xd28,
@@ -332,6 +336,7 @@ static const u16 iproc_pcie_reg_paxb_v2[] = {
 	[IPROC_PCIE_CFG_ADDR]		= 0x1f8,
 	[IPROC_PCIE_CFG_DATA]		= 0x1fc,
 	[IPROC_PCIE_INTX_EN]		= 0x330,
+	[IPROC_PCIE_INTX_CSR]		= 0x334,
 	[IPROC_PCIE_OARR0]		= 0xd20,
 	[IPROC_PCIE_OMAP0]		= 0xd40,
 	[IPROC_PCIE_OARR1]		= 0xd28,
@@ -782,9 +787,90 @@ static int iproc_pcie_check_link(struct iproc_pcie *pcie)
 	return link_is_active ? 0 : -ENODEV;
 }
 
-static void iproc_pcie_enable(struct iproc_pcie *pcie)
+static int iproc_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+			       irq_hw_number_t hwirq)
 {
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops intx_domain_ops = {
+	.map = iproc_pcie_intx_map,
+};
+
+static void iproc_pcie_isr(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct iproc_pcie *pcie;
+	struct device *dev;
+	unsigned long status;
+	u32 bit, virq;
+
+	chained_irq_enter(chip, desc);
+	pcie = irq_desc_get_handler_data(desc);
+	dev = pcie->dev;
+
+	/* go through INTx A, B, C, D until all interrupts are handled */
+	while ((status = iproc_pcie_read_reg(pcie, IPROC_PCIE_INTX_CSR) &
+		SYS_RC_INTX_MASK) != 0) {
+		for_each_set_bit(bit, &status, PCI_NUM_INTX) {
+			virq = irq_find_mapping(pcie->irq_domain, bit + 1);
+			if (virq)
+				generic_handle_irq(virq);
+			else
+				dev_err(dev, "unexpected INTx%u\n", bit);
+		}
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int iproc_pcie_intx_enable(struct iproc_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	struct device_node *node = dev->of_node;
+	int ret;
+
 	iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK);
+
+	/*
+	 * BCMA devices do not map INTx the same way as platform devices. All
+	 * BCMA needs is the above code to enable INTx
+	 */
+	if (pcie->irq <= 0)
+		return 0;
+
+	/* set IRQ handler */
+	irq_set_chained_handler_and_data(pcie->irq, iproc_pcie_isr, pcie);
+
+	/* add IRQ domain for INTx */
+	pcie->irq_domain = irq_domain_add_linear(node, PCI_NUM_INTX + 1,
+						 &intx_domain_ops, pcie);
+	if (!pcie->irq_domain) {
+		dev_err(dev, "failed to add INTx IRQ domain\n");
+		ret = -ENOMEM;
+		goto err_rm_handler_data;
+	}
+
+	return 0;
+
+err_rm_handler_data:
+	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
+
+	return ret;
+}
+
+static void iproc_pcie_intx_disable(struct iproc_pcie *pcie)
+{
+	iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, 0x0);
+
+	if (pcie->irq <= 0)
+		return;
+
+	irq_domain_remove(pcie->irq_domain);
+	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
 }
 
 static inline bool iproc_pcie_ob_is_valid(struct iproc_pcie *pcie,
@@ -1410,7 +1496,11 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 		goto err_power_off_phy;
 	}
 
-	iproc_pcie_enable(pcie);
+	ret = iproc_pcie_intx_enable(pcie);
+	if (ret) {
+		dev_err(dev, "failed to enable INTx\n");
+		goto err_power_off_phy;
+	}
 
 	if (IS_ENABLED(CONFIG_PCI_MSI))
 		if (iproc_pcie_msi_enable(pcie))
@@ -1455,6 +1545,7 @@ int iproc_pcie_remove(struct iproc_pcie *pcie)
 	pci_remove_root_bus(pcie->root_bus);
 
 	iproc_pcie_msi_disable(pcie);
+	iproc_pcie_intx_disable(pcie);
 
 	phy_power_off(pcie->phy);
 	phy_exit(pcie->phy);
diff --git a/drivers/pci/host/pcie-iproc.h b/drivers/pci/host/pcie-iproc.h
index 67081cb..cbcaf9d 100644
--- a/drivers/pci/host/pcie-iproc.h
+++ b/drivers/pci/host/pcie-iproc.h
@@ -72,6 +72,9 @@ struct iproc_msi;
  * @ib: inbound mapping related parameters
  * @ib_map: outbound mapping region related parameters
  *
+ * @irq: interrupt line wired to the generic GIC for INTx
+ * @irq_domain: IRQ domain for INTx
+ *
  * @need_msi_steer: indicates additional configuration of the iProc PCIe
  * controller is required to steer MSI writes to external interrupt controller
  * @msi: MSI data
@@ -99,6 +102,9 @@ struct iproc_pcie {
 	struct iproc_pcie_ib ib;
 	const struct iproc_pcie_ib_map *ib_map;
 
+	int irq;
+	struct irq_domain *irq_domain;
+
 	bool need_msi_steer;
 	struct iproc_msi *msi;
 };
-- 
2.1.4

  parent reply	other threads:[~2018-05-29 22:00 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-29 21:58 [PATCH 0/6] PAXB INTx support with proper model Ray Jui
2018-05-29 21:58 ` Ray Jui
2018-05-29 21:58 ` Ray Jui
2018-05-29 21:58 ` [PATCH 1/6] PCI: iproc: Update iProc PCI binding for INTx support Ray Jui
2018-05-29 21:58   ` Ray Jui
2018-06-04 14:17   ` Rob Herring
2018-06-04 14:17     ` Rob Herring
2018-06-05  1:17     ` Ray Jui
2018-06-05  1:17       ` Ray Jui
2018-06-05  1:17       ` Ray Jui
2018-09-18 13:41     ` Lorenzo Pieralisi
2018-09-18 13:41       ` Lorenzo Pieralisi
2018-09-18 13:41       ` Lorenzo Pieralisi
2018-09-18 13:41       ` Lorenzo Pieralisi
2018-09-24 20:53       ` Arnd Bergmann
2018-09-24 20:53         ` Arnd Bergmann
2018-09-25 10:50         ` Lorenzo Pieralisi
2018-09-25 10:50           ` Lorenzo Pieralisi
2018-09-25 10:55           ` Arnd Bergmann
2018-09-25 10:55             ` Arnd Bergmann
2019-01-03 20:58             ` Ray Jui
2019-01-03 20:58               ` Ray Jui
2018-05-29 21:58 ` Ray Jui [this message]
2018-05-29 21:58   ` [PATCH 2/6] PCI: iproc: Add INTx support with better modeling Ray Jui
2018-05-30  0:59   ` Andy Shevchenko
2018-05-30  0:59     ` Andy Shevchenko
2018-05-30  0:59     ` Andy Shevchenko
2018-05-30 17:27     ` Ray Jui
2018-05-30 17:27       ` Ray Jui
2018-06-12  8:52   ` poza
2018-06-12  8:52     ` poza at codeaurora.org
2018-06-12  8:52     ` poza
2018-06-12 17:06     ` Ray Jui
2018-06-12 17:06       ` Ray Jui
2018-06-12 17:06       ` Ray Jui
2018-05-29 21:58 ` [PATCH 3/6] arm: dts: Change PCIe INTx mapping for Cygnus Ray Jui
2018-05-29 21:58   ` Ray Jui
2018-06-11 22:36   ` Florian Fainelli
2018-06-11 22:36     ` Florian Fainelli
2018-06-11 22:36     ` Florian Fainelli
2018-06-12  0:27     ` Ray Jui
2018-06-12  0:27       ` Ray Jui
2018-06-12  0:55       ` Florian Fainelli
2018-06-12  0:55         ` Florian Fainelli
2018-06-12  0:55         ` Florian Fainelli
2018-06-12  1:03         ` Ray Jui
2018-06-12  1:03           ` Ray Jui
2018-05-29 21:58 ` [PATCH 4/6] arm: dts: Change PCIe INTx mapping for NSP Ray Jui
2018-05-29 21:58   ` Ray Jui
2018-05-29 21:58 ` [PATCH 5/6] arm: dts: Change PCIe INTx mapping for HR2 Ray Jui
2018-05-29 21:58   ` Ray Jui
2018-05-29 21:58 ` [PATCH 6/6] arm64: dts: Change PCIe INTx mapping for NS2 Ray Jui
2018-05-29 21:58   ` Ray Jui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1527631130-20045-3-git-send-email-ray.jui@broadcom.com \
    --to=ray.jui@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.