All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shashank Sharma <shashank.sharma@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [REBASE v9 2/8] drm/i915: Add CRTC output format YCBCR 4:2:0
Date: Wed, 30 May 2018 15:47:49 +0530	[thread overview]
Message-ID: <1527675475-18114-3-git-send-email-shashank.sharma@intel.com> (raw)
In-Reply-To: <1527675475-18114-1-git-send-email-shashank.sharma@intel.com>

Currently, we are using a bool in CRTC state (state->ycbcr420),
to indicate modeset, that the output format is YCBCR 4:2:0. Now in
order to support other YCBCR formats, we will need more such flags.

This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the
CRTC output formats and then plugs it during the modeset.

V3: Added this patch in the series, to address review comments from
    second patchset.
V4: Added r-b from Maarten (on v3)
    Addressed review comments from Ville:
	- Change the enum name to intel_output_format from crtc_output_format.
	- Start the enum value (INVALID) from 0 instaed of 1.
        - Set the crtc's output_format to RGB in encoder's compute_config.
V5: Broke previous patch 1 into two parts,
    - first patch to add CRTC output format in general
    - second patch (this one) to add YCBCR 4:2:0 output
      format specifically.
    - Use ARRAY_SIZE(format_str) for output format validity check (Ville)
V6: Added a separate function to calculate crtc_state->output_format, and
    calling it from various get_config function (Fix CI build warning)
V7: Fixed checkpatch warnings for alignment
V8: Rebase

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/intel_color.c   |  2 +-
 drivers/gpu/drm/i915/intel_ddi.c     |  2 +-
 drivers/gpu/drm/i915/intel_display.c | 72 +++++++++++++++++++++---------------
 drivers/gpu/drm/i915/intel_drv.h     |  4 +-
 drivers/gpu/drm/i915/intel_hdmi.c    |  6 +--
 drivers/gpu/drm/i915/intel_panel.c   |  2 +-
 6 files changed, 50 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
index c6a7bea..bf9d8f6 100644
--- a/drivers/gpu/drm/i915/intel_color.c
+++ b/drivers/gpu/drm/i915/intel_color.c
@@ -149,7 +149,7 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)
 	if (INTEL_GEN(dev_priv) >= 8 || IS_HASWELL(dev_priv))
 		limited_color_range = intel_crtc_state->limited_color_range;
 
-	if (intel_crtc_state->ycbcr420) {
+	if (intel_crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
 		ilk_load_ycbcr_conversion_matrix(intel_crtc);
 		return;
 	} else if (crtc_state->ctm) {
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 3b8f128..1c55fb2 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1413,7 +1413,7 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
 	else
 		dotclock = pipe_config->port_clock;
 
-	if (pipe_config->ycbcr420)
+	if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
 		dotclock *= 2;
 
 	if (pipe_config->pixel_multiplier)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f9cb2b0..5fbd19c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4772,7 +4772,8 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
 		if (pixel_format == DRM_FORMAT_NV12)
 			need_scaling = true;
 
-	if (crtc_state->ycbcr420 && scaler_user == SKL_CRTC_INDEX)
+	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
+	    scaler_user == SKL_CRTC_INDEX)
 		need_scaling = true;
 
 	/*
@@ -6551,7 +6552,8 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
 		return -EINVAL;
 	}
 
-	if (pipe_config->ycbcr420 && pipe_config->base.ctm) {
+	if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
+	    pipe_config->base.ctm) {
 		/*
 		 * There is only one pipe CSC unit per pipe, and we need that
 		 * for output conversion from RGB->YCBCR. So if CTM is already
@@ -7747,6 +7749,35 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc,
 	pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
 }
 
+static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,
+					struct intel_crtc_state *pipe_config)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	enum intel_output_format output = INTEL_OUTPUT_FORMAT_RGB;
+
+	if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
+		u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
+
+		if (tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV) {
+			bool ycbcr420_enabled = tmp & PIPEMISC_YUV420_ENABLE;
+			bool blend = tmp & PIPEMISC_YUV420_MODE_FULL_BLEND;
+
+			if (ycbcr420_enabled) {
+				/* We support 4:2:0 in full blend mode only */
+				if (!blend)
+					output = INTEL_OUTPUT_FORMAT_INVALID;
+				else if (!(IS_GEMINILAKE(dev_priv) ||
+					   INTEL_GEN(dev_priv) >= 10))
+					output = INTEL_OUTPUT_FORMAT_INVALID;
+				else
+					output = INTEL_OUTPUT_FORMAT_YCBCR420;
+			}
+		}
+	}
+
+	pipe_config->output_format = output;
+}
+
 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 				 struct intel_crtc_state *pipe_config)
 {
@@ -7794,6 +7825,7 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 
 	intel_get_pipe_timings(crtc, pipe_config);
 	intel_get_pipe_src_size(crtc, pipe_config);
+	intel_get_crtc_ycbcr_config(crtc, pipe_config);
 
 	i9xx_get_pfit_config(crtc, pipe_config);
 
@@ -8381,10 +8413,10 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
 		if (intel_crtc->config->dither)
 			val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
 
-		if (config->ycbcr420) {
-			val |= PIPEMISC_OUTPUT_COLORSPACE_YUV |
-				PIPEMISC_YUV420_ENABLE |
-				PIPEMISC_YUV420_MODE_FULL_BLEND;
+		if (config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
+			val |= PIPEMISC_OUTPUT_COLORSPACE_YUV;
+			val |= PIPEMISC_YUV420_ENABLE |
+			       PIPEMISC_YUV420_MODE_FULL_BLEND;
 		}
 
 		I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
@@ -8880,6 +8912,7 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 
 	intel_get_pipe_timings(crtc, pipe_config);
 	intel_get_pipe_src_size(crtc, pipe_config);
+	intel_get_crtc_ycbcr_config(crtc, pipe_config);
 
 	ironlake_get_pfit_config(crtc, pipe_config);
 
@@ -9400,28 +9433,11 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 	}
 
 	intel_get_pipe_src_size(crtc, pipe_config);
+	intel_get_crtc_ycbcr_config(crtc, pipe_config);
 
 	pipe_config->gamma_mode =
 		I915_READ(GAMMA_MODE(crtc->pipe)) & GAMMA_MODE_MODE_MASK;
 
-	if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
-		u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
-		bool clrspace_yuv = tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV;
-
-		if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
-			bool blend_mode_420 = tmp &
-					      PIPEMISC_YUV420_MODE_FULL_BLEND;
-
-			pipe_config->ycbcr420 = tmp & PIPEMISC_YUV420_ENABLE;
-			if (pipe_config->ycbcr420 != clrspace_yuv ||
-			    pipe_config->ycbcr420 != blend_mode_420)
-				DRM_DEBUG_KMS("Bad 4:2:0 mode (%08x)\n", tmp);
-		} else if (clrspace_yuv) {
-			DRM_DEBUG_KMS("YCbCr 4:2:0 Unsupported\n");
-		}
-	}
-
-	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
 	if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
 		power_domain_mask |= BIT_ULL(power_domain);
@@ -10757,11 +10773,13 @@ static void snprintf_output_types(char *buf, size_t len,
 static const char * const output_format_str[] = {
 	[INTEL_OUTPUT_FORMAT_INVALID] = "Invalid",
 	[INTEL_OUTPUT_FORMAT_RGB] = "RGB",
+	[INTEL_OUTPUT_FORMAT_YCBCR420] = "YCBCR4:2:0",
 };
 
 static const char *output_formats(enum intel_output_format format)
 {
-	if (format != INTEL_OUTPUT_FORMAT_RGB)
+	if (format < INTEL_OUTPUT_FORMAT_RGB ||
+	    format > ARRAY_SIZE(output_format_str))
 		format = INTEL_OUTPUT_FORMAT_INVALID;
 	return output_format_str[format];
 }
@@ -10797,9 +10815,6 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 				      pipe_config->fdi_lanes,
 				      &pipe_config->fdi_m_n);
 
-	if (pipe_config->ycbcr420)
-		DRM_DEBUG_KMS("YCbCr 4:2:0 output enabled\n");
-
 	if (intel_crtc_has_dp_encoder(pipe_config)) {
 		intel_dump_m_n_config(pipe_config, "dp m_n",
 				pipe_config->lane_count, &pipe_config->dp_m_n);
@@ -11385,7 +11400,6 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
 	PIPE_CONF_CHECK_BOOL(hdmi_scrambling);
 	PIPE_CONF_CHECK_BOOL(hdmi_high_tmds_clock_ratio);
 	PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_infoframe);
-	PIPE_CONF_CHECK_BOOL(ycbcr420);
 
 	PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_audio);
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 6804248..35c4dc9 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -712,6 +712,7 @@ struct intel_crtc_wm_state {
 enum intel_output_format {
 	INTEL_OUTPUT_FORMAT_INVALID,
 	INTEL_OUTPUT_FORMAT_RGB,
+	INTEL_OUTPUT_FORMAT_YCBCR420,
 };
 
 struct intel_crtc_state {
@@ -901,9 +902,6 @@ struct intel_crtc_state {
 	/* HDMI High TMDS char rate ratio */
 	bool hdmi_high_tmds_clock_ratio;
 
-	/* output format is YCBCR 4:2:0 */
-	bool ycbcr420;
-
 	/* Output format RGB/YCBCR etc */
 	enum intel_output_format output_format;
 };
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 1b0d298..933f9a2 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -480,7 +480,7 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
 		return;
 	}
 
-	if (crtc_state->ycbcr420)
+	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
 		frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
 	else
 		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
@@ -1599,7 +1599,7 @@ static bool hdmi_12bpc_possible(const struct intel_crtc_state *crtc_state)
 		if (connector_state->crtc != crtc_state->base.crtc)
 			continue;
 
-		if (crtc_state->ycbcr420) {
+		if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
 			const struct drm_hdmi_info *hdmi = &info->hdmi;
 
 			if (!(hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_36))
@@ -1634,7 +1634,7 @@ intel_hdmi_ycbcr420_config(struct drm_connector *connector,
 	config->port_clock /= 2;
 	*clock_12bpc /= 2;
 	*clock_8bpc /= 2;
-	config->ycbcr420 = true;
+	config->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
 
 	/* YCBCR 420 output conversion needs a scaler */
 	if (skl_update_scaler_crtc(config)) {
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index b443278..4348a5f 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -111,7 +111,7 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
 	/* Native modes don't need fitting */
 	if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w &&
 	    adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h &&
-	    !pipe_config->ycbcr420)
+	    pipe_config->output_format != INTEL_OUTPUT_FORMAT_YCBCR420)
 		goto done;
 
 	switch (fitting_mode) {
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-05-30 10:10 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-30 10:17 [REBASE v9 0/8] YCBCR 4:2:0/4:4:4 output support for LSPCON Shashank Sharma
2018-05-30 10:17 ` [REBASE v9 1/8] drm/i915: Introduce CRTC output format Shashank Sharma
2018-05-30 10:17 ` Shashank Sharma [this message]
2018-05-30 10:17 ` [REBASE v9 3/8] drm/i915: Add CRTC output format YCBCR 4:4:4 Shashank Sharma
2018-05-30 10:17 ` [REBASE v9 4/8] drm/i915: Check LSPCON vendor OUI Shashank Sharma
2018-05-30 10:17 ` [REBASE v9 5/8] drm/i915: Add AVI infoframe support for LSPCON Shashank Sharma
2018-05-30 10:17 ` [REBASE v9 6/8] drm/i915: Write AVI infoframes for MCA LSPCON Shashank Sharma
2018-06-05  9:30   ` [PATCH v9 5/8] drm/i915: Add AVI infoframe support for LSPCON Shashank Sharma
2018-06-05  9:32   ` [PATCH v9 6/8] drm/i915: Write AVI infoframes for MCA LSPCON Shashank Sharma
2018-05-30 10:17 ` [REBASE v9 7/8] drm/i915: Write AVI infoframes for Parade LSPCON Shashank Sharma
2018-05-30 10:17 ` [REBASE v9 8/8] drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON Shashank Sharma
2018-05-30 11:01 ` ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev8) Patchwork
2018-05-30 11:22 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-06-05 11:02 ` ✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev10) Patchwork
2018-06-05 11:18 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-06-05 13:11 ` ✗ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1527675475-18114-3-git-send-email-shashank.sharma@intel.com \
    --to=shashank.sharma@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.