* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-05-21 11:59 ` Maxime Ripard
0 siblings, 0 replies; 22+ messages in thread
From: Maxime Ripard @ 2018-05-21 11:59 UTC (permalink / raw)
To: Mike Turquette, Stephen Boyd
Cc: Chen-Yu Tsai, Maxime Ripard, linux-arm-kernel, linux-clk
[-- Attachment #1: Type: text/plain, Size: 2055 bytes --]
Hi Mike, Stephen,
Please merge the following changes for the next merge window, thanks!
Maxime
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
----------------------------------------------------------------
Allwinner clock changes for 4.18
Not a lot of changes for this release, but two quite important features
were added: the H6 PRCM clock support, and the needed changes to the R40
clock driver to allow for the EMAC to operate.
----------------------------------------------------------------
Icenowy Zheng (3):
clk: sunxi-ng: add support for H6 PRCM CCU
clk: sunxi-ng: r40: rewrite init code to a platform driver
clk: sunxi-ng: r40: export a regmap to access the GMAC register
.../devicetree/bindings/clock/sunxi-ccu.txt | 3 +-
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 207 +++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h | 19 ++
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 72 +++++--
include/dt-bindings/clock/sun50i-h6-r-ccu.h | 24 +++
include/dt-bindings/reset/sun50i-h6-r-ccu.h | 17 ++
8 files changed, 336 insertions(+), 12 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
create mode 100644 include/dt-bindings/clock/sun50i-h6-r-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-h6-r-ccu.h
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-05-21 11:59 ` Maxime Ripard
0 siblings, 0 replies; 22+ messages in thread
From: Maxime Ripard @ 2018-05-21 11:59 UTC (permalink / raw)
To: linux-arm-kernel
Hi Mike, Stephen,
Please merge the following changes for the next merge window, thanks!
Maxime
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
----------------------------------------------------------------
Allwinner clock changes for 4.18
Not a lot of changes for this release, but two quite important features
were added: the H6 PRCM clock support, and the needed changes to the R40
clock driver to allow for the EMAC to operate.
----------------------------------------------------------------
Icenowy Zheng (3):
clk: sunxi-ng: add support for H6 PRCM CCU
clk: sunxi-ng: r40: rewrite init code to a platform driver
clk: sunxi-ng: r40: export a regmap to access the GMAC register
.../devicetree/bindings/clock/sunxi-ccu.txt | 3 +-
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 207 +++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h | 19 ++
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 72 +++++--
include/dt-bindings/clock/sun50i-h6-r-ccu.h | 24 +++
include/dt-bindings/reset/sun50i-h6-r-ccu.h | 17 ++
8 files changed, 336 insertions(+), 12 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
create mode 100644 include/dt-bindings/clock/sun50i-h6-r-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-h6-r-ccu.h
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180521/979be52e/attachment-0001.sig>
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [GIT PULL] Allwinner clock changes for 4.18
2018-05-21 11:59 ` Maxime Ripard
@ 2018-06-01 17:25 ` Stephen Boyd
-1 siblings, 0 replies; 22+ messages in thread
From: Stephen Boyd @ 2018-06-01 17:25 UTC (permalink / raw)
To: Maxime Ripard, Mike Turquette, Stephen Boyd
Cc: Chen-Yu Tsai, Maxime Ripard, linux-arm-kernel, linux-clk
Quoting Maxime Ripard (2018-05-21 04:59:47)
> Hi Mike, Stephen,
> =
> Please merge the following changes for the next merge window, thanks!
> =
Thanks. Pulled into clk-next.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [GIT PULL] Allwinner clock changes for 4.18
2018-05-21 11:59 ` Maxime Ripard
@ 2018-06-11 2:00 ` Masahiro Yamada
-1 siblings, 0 replies; 22+ messages in thread
From: Masahiro Yamada @ 2018-06-11 2:00 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mike Turquette, Stephen Boyd, Chen-Yu Tsai, linux-arm-kernel, linux-clk
Hi Maxime,
2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> Hi Mike, Stephen,
>
> Please merge the following changes for the next merge window, thanks!
>
> Maxime
>
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
>
> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
>
> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
>
> ----------------------------------------------------------------
> Allwinner clock changes for 4.18
>
> Not a lot of changes for this release, but two quite important features
> were added: the H6 PRCM clock support, and the needed changes to the R40
> clock driver to allow for the EMAC to operate.
>
> ----------------------------------------------------------------
> Icenowy Zheng (3):
> clk: sunxi-ng: add support for H6 PRCM CCU
> clk: sunxi-ng: r40: rewrite init code to a platform driver
> clk: sunxi-ng: r40: export a regmap to access the GMAC register
>
Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
not included in the pull request?
You said "I've picked it up"
https://patchwork.kernel.org/patch/10348031/
> .../devicetree/bindings/clock/sunxi-ccu.txt | 3 +-
> drivers/clk/sunxi-ng/Kconfig | 5 +
> drivers/clk/sunxi-ng/Makefile | 1 +
> drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 207 +++++++++++++++++++++
> drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h | 19 ++
> drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 72 +++++--
> include/dt-bindings/clock/sun50i-h6-r-ccu.h | 24 +++
> include/dt-bindings/reset/sun50i-h6-r-ccu.h | 17 ++
> 8 files changed, 336 insertions(+), 12 deletions(-)
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
> create mode 100644 include/dt-bindings/clock/sun50i-h6-r-ccu.h
> create mode 100644 include/dt-bindings/reset/sun50i-h6-r-ccu.h
>
> --
> Maxime Ripard, Bootlin (formerly Free Electrons)
> Embedded Linux and Kernel engineering
> https://bootlin.com
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 22+ messages in thread
* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-06-11 2:00 ` Masahiro Yamada
0 siblings, 0 replies; 22+ messages in thread
From: Masahiro Yamada @ 2018-06-11 2:00 UTC (permalink / raw)
To: linux-arm-kernel
Hi Maxime,
2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> Hi Mike, Stephen,
>
> Please merge the following changes for the next merge window, thanks!
>
> Maxime
>
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
>
> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
>
> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
>
> ----------------------------------------------------------------
> Allwinner clock changes for 4.18
>
> Not a lot of changes for this release, but two quite important features
> were added: the H6 PRCM clock support, and the needed changes to the R40
> clock driver to allow for the EMAC to operate.
>
> ----------------------------------------------------------------
> Icenowy Zheng (3):
> clk: sunxi-ng: add support for H6 PRCM CCU
> clk: sunxi-ng: r40: rewrite init code to a platform driver
> clk: sunxi-ng: r40: export a regmap to access the GMAC register
>
Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
not included in the pull request?
You said "I've picked it up"
https://patchwork.kernel.org/patch/10348031/
> .../devicetree/bindings/clock/sunxi-ccu.txt | 3 +-
> drivers/clk/sunxi-ng/Kconfig | 5 +
> drivers/clk/sunxi-ng/Makefile | 1 +
> drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 207 +++++++++++++++++++++
> drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h | 19 ++
> drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 72 +++++--
> include/dt-bindings/clock/sun50i-h6-r-ccu.h | 24 +++
> include/dt-bindings/reset/sun50i-h6-r-ccu.h | 17 ++
> 8 files changed, 336 insertions(+), 12 deletions(-)
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
> create mode 100644 include/dt-bindings/clock/sun50i-h6-r-ccu.h
> create mode 100644 include/dt-bindings/reset/sun50i-h6-r-ccu.h
>
> --
> Maxime Ripard, Bootlin (formerly Free Electrons)
> Embedded Linux and Kernel engineering
> https://bootlin.com
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [GIT PULL] Allwinner clock changes for 4.18
2018-06-11 2:00 ` Masahiro Yamada
@ 2018-06-11 7:53 ` Chen-Yu Tsai
-1 siblings, 0 replies; 22+ messages in thread
From: Chen-Yu Tsai @ 2018-06-11 7:53 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Maxime Ripard, Mike Turquette, Stephen Boyd, linux-arm-kernel, linux-clk
Hi,
On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> Hi Maxime,
>
>
> 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
>> Hi Mike, Stephen,
>>
>> Please merge the following changes for the next merge window, thanks!
>>
>> Maxime
>>
>> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>>
>> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>>
>> are available in the Git repository at:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
>>
>> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
>>
>> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
>>
>> ----------------------------------------------------------------
>> Allwinner clock changes for 4.18
>>
>> Not a lot of changes for this release, but two quite important features
>> were added: the H6 PRCM clock support, and the needed changes to the R40
>> clock driver to allow for the EMAC to operate.
>>
>> ----------------------------------------------------------------
>> Icenowy Zheng (3):
>> clk: sunxi-ng: add support for H6 PRCM CCU
>> clk: sunxi-ng: r40: rewrite init code to a platform driver
>> clk: sunxi-ng: r40: export a regmap to access the GMAC register
>>
>
>
>
> Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
> not included in the pull request?
>
>
> You said "I've picked it up"
> https://patchwork.kernel.org/patch/10348031/
It looks like it was accidentally dropped after a rebase.
Not quite sure what happened there. Maxime?
ChenYu
^ permalink raw reply [flat|nested] 22+ messages in thread
* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-06-11 7:53 ` Chen-Yu Tsai
0 siblings, 0 replies; 22+ messages in thread
From: Chen-Yu Tsai @ 2018-06-11 7:53 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> Hi Maxime,
>
>
> 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
>> Hi Mike, Stephen,
>>
>> Please merge the following changes for the next merge window, thanks!
>>
>> Maxime
>>
>> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>>
>> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>>
>> are available in the Git repository at:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
>>
>> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
>>
>> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
>>
>> ----------------------------------------------------------------
>> Allwinner clock changes for 4.18
>>
>> Not a lot of changes for this release, but two quite important features
>> were added: the H6 PRCM clock support, and the needed changes to the R40
>> clock driver to allow for the EMAC to operate.
>>
>> ----------------------------------------------------------------
>> Icenowy Zheng (3):
>> clk: sunxi-ng: add support for H6 PRCM CCU
>> clk: sunxi-ng: r40: rewrite init code to a platform driver
>> clk: sunxi-ng: r40: export a regmap to access the GMAC register
>>
>
>
>
> Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
> not included in the pull request?
>
>
> You said "I've picked it up"
> https://patchwork.kernel.org/patch/10348031/
It looks like it was accidentally dropped after a rebase.
Not quite sure what happened there. Maxime?
ChenYu
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [GIT PULL] Allwinner clock changes for 4.18
2018-06-11 7:53 ` Chen-Yu Tsai
@ 2018-06-12 8:00 ` Stephen Boyd
-1 siblings, 0 replies; 22+ messages in thread
From: Stephen Boyd @ 2018-06-12 8:00 UTC (permalink / raw)
To: Chen-Yu Tsai, Masahiro Yamada
Cc: Maxime Ripard, Mike Turquette, Stephen Boyd, linux-arm-kernel, linux-clk
Quoting Chen-Yu Tsai (2018-06-11 00:53:41)
> Hi,
> =
> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
> > Hi Maxime,
> >
> >
> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> >> Hi Mike, Stephen,
> >>
> >> Please merge the following changes for the next merge window, thanks!
> >>
> >> Maxime
> >>
> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a2=
43338:
> >>
> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
> >>
> >> are available in the Git repository at:
> >>
> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags=
/sunxi-clk-for-4.18
> >>
> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc04=
4:
> >>
> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (201=
8-05-17 14:02:07 +0800)
> >>
> >> ----------------------------------------------------------------
> >> Allwinner clock changes for 4.18
> >>
> >> Not a lot of changes for this release, but two quite important features
> >> were added: the H6 PRCM clock support, and the needed changes to the R=
40
> >> clock driver to allow for the EMAC to operate.
> >>
> >> ----------------------------------------------------------------
> >> Icenowy Zheng (3):
> >> clk: sunxi-ng: add support for H6 PRCM CCU
> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
> >>
> >
> >
> >
> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
> > not included in the pull request?
> >
> >
> > You said "I've picked it up"
> > https://patchwork.kernel.org/patch/10348031/
> =
> It looks like it was accidentally dropped after a rebase.
> Not quite sure what happened there. Maxime?
> =
I can directly pick and send as fix for clk-fixes targeting rc2.
^ permalink raw reply [flat|nested] 22+ messages in thread
* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-06-12 8:00 ` Stephen Boyd
0 siblings, 0 replies; 22+ messages in thread
From: Stephen Boyd @ 2018-06-12 8:00 UTC (permalink / raw)
To: linux-arm-kernel
Quoting Chen-Yu Tsai (2018-06-11 00:53:41)
> Hi,
>
> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
> > Hi Maxime,
> >
> >
> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> >> Hi Mike, Stephen,
> >>
> >> Please merge the following changes for the next merge window, thanks!
> >>
> >> Maxime
> >>
> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
> >>
> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
> >>
> >> are available in the Git repository at:
> >>
> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
> >>
> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
> >>
> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
> >>
> >> ----------------------------------------------------------------
> >> Allwinner clock changes for 4.18
> >>
> >> Not a lot of changes for this release, but two quite important features
> >> were added: the H6 PRCM clock support, and the needed changes to the R40
> >> clock driver to allow for the EMAC to operate.
> >>
> >> ----------------------------------------------------------------
> >> Icenowy Zheng (3):
> >> clk: sunxi-ng: add support for H6 PRCM CCU
> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
> >>
> >
> >
> >
> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
> > not included in the pull request?
> >
> >
> > You said "I've picked it up"
> > https://patchwork.kernel.org/patch/10348031/
>
> It looks like it was accidentally dropped after a rebase.
> Not quite sure what happened there. Maxime?
>
I can directly pick and send as fix for clk-fixes targeting rc2.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [GIT PULL] Allwinner clock changes for 4.18
2018-06-12 8:00 ` Stephen Boyd
@ 2018-06-12 8:38 ` Chen-Yu Tsai
-1 siblings, 0 replies; 22+ messages in thread
From: Chen-Yu Tsai @ 2018-06-12 8:38 UTC (permalink / raw)
To: Stephen Boyd
Cc: Masahiro Yamada, Maxime Ripard, Mike Turquette, Stephen Boyd,
linux-arm-kernel, linux-clk
On Tue, Jun 12, 2018 at 4:00 PM, Stephen Boyd <sboyd@kernel.org> wrote:
> Quoting Chen-Yu Tsai (2018-06-11 00:53:41)
>> Hi,
>>
>> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
>> <yamada.masahiro@socionext.com> wrote:
>> > Hi Maxime,
>> >
>> >
>> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
>> >> Hi Mike, Stephen,
>> >>
>> >> Please merge the following changes for the next merge window, thanks!
>> >>
>> >> Maxime
>> >>
>> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>> >>
>> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>> >>
>> >> are available in the Git repository at:
>> >>
>> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
>> >>
>> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
>> >>
>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
>> >>
>> >> ----------------------------------------------------------------
>> >> Allwinner clock changes for 4.18
>> >>
>> >> Not a lot of changes for this release, but two quite important features
>> >> were added: the H6 PRCM clock support, and the needed changes to the R40
>> >> clock driver to allow for the EMAC to operate.
>> >>
>> >> ----------------------------------------------------------------
>> >> Icenowy Zheng (3):
>> >> clk: sunxi-ng: add support for H6 PRCM CCU
>> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
>> >>
>> >
>> >
>> >
>> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
>> > not included in the pull request?
>> >
>> >
>> > You said "I've picked it up"
>> > https://patchwork.kernel.org/patch/10348031/
>>
>> It looks like it was accidentally dropped after a rebase.
>> Not quite sure what happened there. Maxime?
>>
>
> I can directly pick and send as fix for clk-fixes targeting rc2.
The patch can still be found in the sunxi/for-next branch of the
sunxi repo on kernel.org:
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?h=sunxi/for-next&id=d4a1496286b0c29fcace4e10c0047cca7cc79b25
Or the original on patchwork:
https://patchwork.kernel.org/patch/10348027/
Thanks
ChenYu
^ permalink raw reply [flat|nested] 22+ messages in thread
* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-06-12 8:38 ` Chen-Yu Tsai
0 siblings, 0 replies; 22+ messages in thread
From: Chen-Yu Tsai @ 2018-06-12 8:38 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jun 12, 2018 at 4:00 PM, Stephen Boyd <sboyd@kernel.org> wrote:
> Quoting Chen-Yu Tsai (2018-06-11 00:53:41)
>> Hi,
>>
>> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
>> <yamada.masahiro@socionext.com> wrote:
>> > Hi Maxime,
>> >
>> >
>> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
>> >> Hi Mike, Stephen,
>> >>
>> >> Please merge the following changes for the next merge window, thanks!
>> >>
>> >> Maxime
>> >>
>> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>> >>
>> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>> >>
>> >> are available in the Git repository at:
>> >>
>> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
>> >>
>> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
>> >>
>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
>> >>
>> >> ----------------------------------------------------------------
>> >> Allwinner clock changes for 4.18
>> >>
>> >> Not a lot of changes for this release, but two quite important features
>> >> were added: the H6 PRCM clock support, and the needed changes to the R40
>> >> clock driver to allow for the EMAC to operate.
>> >>
>> >> ----------------------------------------------------------------
>> >> Icenowy Zheng (3):
>> >> clk: sunxi-ng: add support for H6 PRCM CCU
>> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
>> >>
>> >
>> >
>> >
>> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
>> > not included in the pull request?
>> >
>> >
>> > You said "I've picked it up"
>> > https://patchwork.kernel.org/patch/10348031/
>>
>> It looks like it was accidentally dropped after a rebase.
>> Not quite sure what happened there. Maxime?
>>
>
> I can directly pick and send as fix for clk-fixes targeting rc2.
The patch can still be found in the sunxi/for-next branch of the
sunxi repo on kernel.org:
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?h=sunxi/for-next&id=d4a1496286b0c29fcace4e10c0047cca7cc79b25
Or the original on patchwork:
https://patchwork.kernel.org/patch/10348027/
Thanks
ChenYu
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [GIT PULL] Allwinner clock changes for 4.18
2018-06-12 8:38 ` Chen-Yu Tsai
@ 2018-06-20 2:14 ` Chen-Yu Tsai
-1 siblings, 0 replies; 22+ messages in thread
From: Chen-Yu Tsai @ 2018-06-20 2:14 UTC (permalink / raw)
To: Stephen Boyd
Cc: Masahiro Yamada, Maxime Ripard, Mike Turquette, Stephen Boyd,
linux-arm-kernel, linux-clk
Hi Stephen,
On Tue, Jun 12, 2018 at 4:38 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> On Tue, Jun 12, 2018 at 4:00 PM, Stephen Boyd <sboyd@kernel.org> wrote:
>> Quoting Chen-Yu Tsai (2018-06-11 00:53:41)
>>> Hi,
>>>
>>> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
>>> <yamada.masahiro@socionext.com> wrote:
>>> > Hi Maxime,
>>> >
>>> >
>>> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
>>> >> Hi Mike, Stephen,
>>> >>
>>> >> Please merge the following changes for the next merge window, thanks!
>>> >>
>>> >> Maxime
>>> >>
>>> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>>> >>
>>> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>>> >>
>>> >> are available in the Git repository at:
>>> >>
>>> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
>>> >>
>>> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
>>> >>
>>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
>>> >>
>>> >> ----------------------------------------------------------------
>>> >> Allwinner clock changes for 4.18
>>> >>
>>> >> Not a lot of changes for this release, but two quite important features
>>> >> were added: the H6 PRCM clock support, and the needed changes to the R40
>>> >> clock driver to allow for the EMAC to operate.
>>> >>
>>> >> ----------------------------------------------------------------
>>> >> Icenowy Zheng (3):
>>> >> clk: sunxi-ng: add support for H6 PRCM CCU
>>> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
>>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
>>> >>
>>> >
>>> >
>>> >
>>> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
>>> > not included in the pull request?
>>> >
>>> >
>>> > You said "I've picked it up"
>>> > https://patchwork.kernel.org/patch/10348031/
>>>
>>> It looks like it was accidentally dropped after a rebase.
>>> Not quite sure what happened there. Maxime?
>>>
>>
>> I can directly pick and send as fix for clk-fixes targeting rc2.
This is a friendly reminder to pick up this patch for -rc2.
> The patch can still be found in the sunxi/for-next branch of the
> sunxi repo on kernel.org:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?h=sunxi/for-next&id=d4a1496286b0c29fcace4e10c0047cca7cc79b25
This is still available, but no longer referenced in any branch,
as we've updated our sunxi/for-next branch for 4.19 stuff.
> Or the original on patchwork:
>
> https://patchwork.kernel.org/patch/10348027/
And
Acked-by: Chen-Yu Tsai <wens@csie.org>
if you pick directly from patchwork.
Thanks
ChenYu
^ permalink raw reply [flat|nested] 22+ messages in thread
* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-06-20 2:14 ` Chen-Yu Tsai
0 siblings, 0 replies; 22+ messages in thread
From: Chen-Yu Tsai @ 2018-06-20 2:14 UTC (permalink / raw)
To: linux-arm-kernel
Hi Stephen,
On Tue, Jun 12, 2018 at 4:38 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> On Tue, Jun 12, 2018 at 4:00 PM, Stephen Boyd <sboyd@kernel.org> wrote:
>> Quoting Chen-Yu Tsai (2018-06-11 00:53:41)
>>> Hi,
>>>
>>> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
>>> <yamada.masahiro@socionext.com> wrote:
>>> > Hi Maxime,
>>> >
>>> >
>>> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
>>> >> Hi Mike, Stephen,
>>> >>
>>> >> Please merge the following changes for the next merge window, thanks!
>>> >>
>>> >> Maxime
>>> >>
>>> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>>> >>
>>> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>>> >>
>>> >> are available in the Git repository at:
>>> >>
>>> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
>>> >>
>>> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
>>> >>
>>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
>>> >>
>>> >> ----------------------------------------------------------------
>>> >> Allwinner clock changes for 4.18
>>> >>
>>> >> Not a lot of changes for this release, but two quite important features
>>> >> were added: the H6 PRCM clock support, and the needed changes to the R40
>>> >> clock driver to allow for the EMAC to operate.
>>> >>
>>> >> ----------------------------------------------------------------
>>> >> Icenowy Zheng (3):
>>> >> clk: sunxi-ng: add support for H6 PRCM CCU
>>> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
>>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
>>> >>
>>> >
>>> >
>>> >
>>> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
>>> > not included in the pull request?
>>> >
>>> >
>>> > You said "I've picked it up"
>>> > https://patchwork.kernel.org/patch/10348031/
>>>
>>> It looks like it was accidentally dropped after a rebase.
>>> Not quite sure what happened there. Maxime?
>>>
>>
>> I can directly pick and send as fix for clk-fixes targeting rc2.
This is a friendly reminder to pick up this patch for -rc2.
> The patch can still be found in the sunxi/for-next branch of the
> sunxi repo on kernel.org:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?h=sunxi/for-next&id=d4a1496286b0c29fcace4e10c0047cca7cc79b25
This is still available, but no longer referenced in any branch,
as we've updated our sunxi/for-next branch for 4.19 stuff.
> Or the original on patchwork:
>
> https://patchwork.kernel.org/patch/10348027/
And
Acked-by: Chen-Yu Tsai <wens@csie.org>
if you pick directly from patchwork.
Thanks
ChenYu
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [GIT PULL] Allwinner clock changes for 4.18
2018-06-20 2:14 ` Chen-Yu Tsai
@ 2018-06-21 15:17 ` Stephen Boyd
-1 siblings, 0 replies; 22+ messages in thread
From: Stephen Boyd @ 2018-06-21 15:17 UTC (permalink / raw)
To: Chen-Yu Tsai
Cc: Masahiro Yamada, Maxime Ripard, Mike Turquette, Stephen Boyd,
linux-arm-kernel, linux-clk
Quoting Chen-Yu Tsai (2018-06-19 19:14:26)
> Hi Stephen,
> =
> On Tue, Jun 12, 2018 at 4:38 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> > On Tue, Jun 12, 2018 at 4:00 PM, Stephen Boyd <sboyd@kernel.org> wrote:
> >> Quoting Chen-Yu Tsai (2018-06-11 00:53:41)
> >>>
> >>
> >> I can directly pick and send as fix for clk-fixes targeting rc2.
> =
> This is a friendly reminder to pick up this patch for -rc2.
> =
> > The patch can still be found in the sunxi/for-next branch of the
> > sunxi repo on kernel.org:
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/=
?h=3Dsunxi/for-next&id=3Dd4a1496286b0c29fcace4e10c0047cca7cc79b25
> =
> This is still available, but no longer referenced in any branch,
> as we've updated our sunxi/for-next branch for 4.19 stuff.
> =
> > Or the original on patchwork:
> >
> > https://patchwork.kernel.org/patch/10348027/
> =
> And
> =
> Acked-by: Chen-Yu Tsai <wens@csie.org>
> =
> if you pick directly from patchwork.
> =
Got it from linux-next. Thanks!
^ permalink raw reply [flat|nested] 22+ messages in thread
* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-06-21 15:17 ` Stephen Boyd
0 siblings, 0 replies; 22+ messages in thread
From: Stephen Boyd @ 2018-06-21 15:17 UTC (permalink / raw)
To: linux-arm-kernel
Quoting Chen-Yu Tsai (2018-06-19 19:14:26)
> Hi Stephen,
>
> On Tue, Jun 12, 2018 at 4:38 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> > On Tue, Jun 12, 2018 at 4:00 PM, Stephen Boyd <sboyd@kernel.org> wrote:
> >> Quoting Chen-Yu Tsai (2018-06-11 00:53:41)
> >>>
> >>
> >> I can directly pick and send as fix for clk-fixes targeting rc2.
>
> This is a friendly reminder to pick up this patch for -rc2.
>
> > The patch can still be found in the sunxi/for-next branch of the
> > sunxi repo on kernel.org:
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?h=sunxi/for-next&id=d4a1496286b0c29fcace4e10c0047cca7cc79b25
>
> This is still available, but no longer referenced in any branch,
> as we've updated our sunxi/for-next branch for 4.19 stuff.
>
> > Or the original on patchwork:
> >
> > https://patchwork.kernel.org/patch/10348027/
>
> And
>
> Acked-by: Chen-Yu Tsai <wens@csie.org>
>
> if you pick directly from patchwork.
>
Got it from linux-next. Thanks!
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [GIT PULL] Allwinner clock changes for 4.18
2018-06-11 7:53 ` Chen-Yu Tsai
@ 2018-06-13 7:26 ` Maxime Ripard
-1 siblings, 0 replies; 22+ messages in thread
From: Maxime Ripard @ 2018-06-13 7:26 UTC (permalink / raw)
To: Chen-Yu Tsai
Cc: Masahiro Yamada, Mike Turquette, Stephen Boyd, linux-arm-kernel,
linux-clk
[-- Attachment #1: Type: text/plain, Size: 2080 bytes --]
On Mon, Jun 11, 2018 at 03:53:41PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
> > Hi Maxime,
> >
> >
> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> >> Hi Mike, Stephen,
> >>
> >> Please merge the following changes for the next merge window, thanks!
> >>
> >> Maxime
> >>
> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
> >>
> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
> >>
> >> are available in the Git repository at:
> >>
> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
> >>
> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
> >>
> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
> >>
> >> ----------------------------------------------------------------
> >> Allwinner clock changes for 4.18
> >>
> >> Not a lot of changes for this release, but two quite important features
> >> were added: the H6 PRCM clock support, and the needed changes to the R40
> >> clock driver to allow for the EMAC to operate.
> >>
> >> ----------------------------------------------------------------
> >> Icenowy Zheng (3):
> >> clk: sunxi-ng: add support for H6 PRCM CCU
> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
> >>
> >
> >
> >
> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
> > not included in the pull request?
> >
> >
> > You said "I've picked it up"
> > https://patchwork.kernel.org/patch/10348031/
>
> It looks like it was accidentally dropped after a rebase.
> Not quite sure what happened there. Maxime?
I'm not quite sure what happened, sorry, but this should have
definitely been part of that PR :/
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-06-13 7:26 ` Maxime Ripard
0 siblings, 0 replies; 22+ messages in thread
From: Maxime Ripard @ 2018-06-13 7:26 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jun 11, 2018 at 03:53:41PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
> > Hi Maxime,
> >
> >
> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> >> Hi Mike, Stephen,
> >>
> >> Please merge the following changes for the next merge window, thanks!
> >>
> >> Maxime
> >>
> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
> >>
> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
> >>
> >> are available in the Git repository at:
> >>
> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
> >>
> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
> >>
> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
> >>
> >> ----------------------------------------------------------------
> >> Allwinner clock changes for 4.18
> >>
> >> Not a lot of changes for this release, but two quite important features
> >> were added: the H6 PRCM clock support, and the needed changes to the R40
> >> clock driver to allow for the EMAC to operate.
> >>
> >> ----------------------------------------------------------------
> >> Icenowy Zheng (3):
> >> clk: sunxi-ng: add support for H6 PRCM CCU
> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
> >>
> >
> >
> >
> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
> > not included in the pull request?
> >
> >
> > You said "I've picked it up"
> > https://patchwork.kernel.org/patch/10348031/
>
> It looks like it was accidentally dropped after a rebase.
> Not quite sure what happened there. Maxime?
I'm not quite sure what happened, sorry, but this should have
definitely been part of that PR :/
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180613/3b37b191/attachment.sig>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [GIT PULL] Allwinner clock changes for 4.18
2018-06-13 7:26 ` Maxime Ripard
@ 2018-06-13 8:16 ` Masahiro Yamada
-1 siblings, 0 replies; 22+ messages in thread
From: Masahiro Yamada @ 2018-06-13 8:16 UTC (permalink / raw)
To: Maxime Ripard
Cc: Chen-Yu Tsai, Mike Turquette, Stephen Boyd, linux-arm-kernel, linux-clk
Hi.
2018-06-13 16:26 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> On Mon, Jun 11, 2018 at 03:53:41PM +0800, Chen-Yu Tsai wrote:
>> Hi,
>>
>> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
>> <yamada.masahiro@socionext.com> wrote:
>> > Hi Maxime,
>> >
>> >
>> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
>> >> Hi Mike, Stephen,
>> >>
>> >> Please merge the following changes for the next merge window, thanks!
>> >>
>> >> Maxime
>> >>
>> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>> >>
>> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>> >>
>> >> are available in the Git repository at:
>> >>
>> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
>> >>
>> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
>> >>
>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
>> >>
>> >> ----------------------------------------------------------------
>> >> Allwinner clock changes for 4.18
>> >>
>> >> Not a lot of changes for this release, but two quite important features
>> >> were added: the H6 PRCM clock support, and the needed changes to the R40
>> >> clock driver to allow for the EMAC to operate.
>> >>
>> >> ----------------------------------------------------------------
>> >> Icenowy Zheng (3):
>> >> clk: sunxi-ng: add support for H6 PRCM CCU
>> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
>> >>
>> >
>> >
>> >
>> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
>> > not included in the pull request?
>> >
>> >
>> > You said "I've picked it up"
>> > https://patchwork.kernel.org/patch/10348031/
>>
>> It looks like it was accidentally dropped after a rebase.
>> Not quite sure what happened there. Maxime?
>
> I'm not quite sure what happened, sorry, but this should have
> definitely been part of that PR :/
>
Stephen offered to pick it up directly for -rc2.
Is that OK with you?
I am fine if it is well-organized between you and Stephen.
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 22+ messages in thread
* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-06-13 8:16 ` Masahiro Yamada
0 siblings, 0 replies; 22+ messages in thread
From: Masahiro Yamada @ 2018-06-13 8:16 UTC (permalink / raw)
To: linux-arm-kernel
Hi.
2018-06-13 16:26 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> On Mon, Jun 11, 2018 at 03:53:41PM +0800, Chen-Yu Tsai wrote:
>> Hi,
>>
>> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
>> <yamada.masahiro@socionext.com> wrote:
>> > Hi Maxime,
>> >
>> >
>> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
>> >> Hi Mike, Stephen,
>> >>
>> >> Please merge the following changes for the next merge window, thanks!
>> >>
>> >> Maxime
>> >>
>> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>> >>
>> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>> >>
>> >> are available in the Git repository at:
>> >>
>> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
>> >>
>> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
>> >>
>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
>> >>
>> >> ----------------------------------------------------------------
>> >> Allwinner clock changes for 4.18
>> >>
>> >> Not a lot of changes for this release, but two quite important features
>> >> were added: the H6 PRCM clock support, and the needed changes to the R40
>> >> clock driver to allow for the EMAC to operate.
>> >>
>> >> ----------------------------------------------------------------
>> >> Icenowy Zheng (3):
>> >> clk: sunxi-ng: add support for H6 PRCM CCU
>> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
>> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
>> >>
>> >
>> >
>> >
>> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
>> > not included in the pull request?
>> >
>> >
>> > You said "I've picked it up"
>> > https://patchwork.kernel.org/patch/10348031/
>>
>> It looks like it was accidentally dropped after a rebase.
>> Not quite sure what happened there. Maxime?
>
> I'm not quite sure what happened, sorry, but this should have
> definitely been part of that PR :/
>
Stephen offered to pick it up directly for -rc2.
Is that OK with you?
I am fine if it is well-organized between you and Stephen.
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [GIT PULL] Allwinner clock changes for 4.18
2018-06-13 8:16 ` Masahiro Yamada
@ 2018-06-13 9:11 ` Maxime Ripard
-1 siblings, 0 replies; 22+ messages in thread
From: Maxime Ripard @ 2018-06-13 9:11 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Chen-Yu Tsai, Mike Turquette, Stephen Boyd, linux-arm-kernel, linux-clk
[-- Attachment #1: Type: text/plain, Size: 2597 bytes --]
On Wed, Jun 13, 2018 at 05:16:30PM +0900, Masahiro Yamada wrote:
> Hi.
>
> 2018-06-13 16:26 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> > On Mon, Jun 11, 2018 at 03:53:41PM +0800, Chen-Yu Tsai wrote:
> >> Hi,
> >>
> >> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
> >> <yamada.masahiro@socionext.com> wrote:
> >> > Hi Maxime,
> >> >
> >> >
> >> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> >> >> Hi Mike, Stephen,
> >> >>
> >> >> Please merge the following changes for the next merge window, thanks!
> >> >>
> >> >> Maxime
> >> >>
> >> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
> >> >>
> >> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
> >> >>
> >> >> are available in the Git repository at:
> >> >>
> >> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
> >> >>
> >> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
> >> >>
> >> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
> >> >>
> >> >> ----------------------------------------------------------------
> >> >> Allwinner clock changes for 4.18
> >> >>
> >> >> Not a lot of changes for this release, but two quite important features
> >> >> were added: the H6 PRCM clock support, and the needed changes to the R40
> >> >> clock driver to allow for the EMAC to operate.
> >> >>
> >> >> ----------------------------------------------------------------
> >> >> Icenowy Zheng (3):
> >> >> clk: sunxi-ng: add support for H6 PRCM CCU
> >> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
> >> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
> >> >>
> >> >
> >> >
> >> >
> >> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
> >> > not included in the pull request?
> >> >
> >> >
> >> > You said "I've picked it up"
> >> > https://patchwork.kernel.org/patch/10348031/
> >>
> >> It looks like it was accidentally dropped after a rebase.
> >> Not quite sure what happened there. Maxime?
> >
> > I'm not quite sure what happened, sorry, but this should have
> > definitely been part of that PR :/
> >
>
> Stephen offered to pick it up directly for -rc2.
> Is that OK with you?
>
> I am fine if it is well-organized between you and Stephen.
Yep, that definitely works for me.
Sorry again,
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* [GIT PULL] Allwinner clock changes for 4.18
@ 2018-06-13 9:11 ` Maxime Ripard
0 siblings, 0 replies; 22+ messages in thread
From: Maxime Ripard @ 2018-06-13 9:11 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jun 13, 2018 at 05:16:30PM +0900, Masahiro Yamada wrote:
> Hi.
>
> 2018-06-13 16:26 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> > On Mon, Jun 11, 2018 at 03:53:41PM +0800, Chen-Yu Tsai wrote:
> >> Hi,
> >>
> >> On Mon, Jun 11, 2018 at 10:00 AM, Masahiro Yamada
> >> <yamada.masahiro@socionext.com> wrote:
> >> > Hi Maxime,
> >> >
> >> >
> >> > 2018-05-21 20:59 GMT+09:00 Maxime Ripard <maxime.ripard@bootlin.com>:
> >> >> Hi Mike, Stephen,
> >> >>
> >> >> Please merge the following changes for the next merge window, thanks!
> >> >>
> >> >> Maxime
> >> >>
> >> >> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
> >> >>
> >> >> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
> >> >>
> >> >> are available in the Git repository at:
> >> >>
> >> >> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-clk-for-4.18
> >> >>
> >> >> for you to fetch changes up to 17de4c857b1f74b90967f7e7fd5ff81be61dc044:
> >> >>
> >> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register (2018-05-17 14:02:07 +0800)
> >> >>
> >> >> ----------------------------------------------------------------
> >> >> Allwinner clock changes for 4.18
> >> >>
> >> >> Not a lot of changes for this release, but two quite important features
> >> >> were added: the H6 PRCM clock support, and the needed changes to the R40
> >> >> clock driver to allow for the EMAC to operate.
> >> >>
> >> >> ----------------------------------------------------------------
> >> >> Icenowy Zheng (3):
> >> >> clk: sunxi-ng: add support for H6 PRCM CCU
> >> >> clk: sunxi-ng: r40: rewrite init code to a platform driver
> >> >> clk: sunxi-ng: r40: export a regmap to access the GMAC register
> >> >>
> >> >
> >> >
> >> >
> >> > Why was my patch "clk: sunxi-ng: replace lib-y with obj-y"
> >> > not included in the pull request?
> >> >
> >> >
> >> > You said "I've picked it up"
> >> > https://patchwork.kernel.org/patch/10348031/
> >>
> >> It looks like it was accidentally dropped after a rebase.
> >> Not quite sure what happened there. Maxime?
> >
> > I'm not quite sure what happened, sorry, but this should have
> > definitely been part of that PR :/
> >
>
> Stephen offered to pick it up directly for -rc2.
> Is that OK with you?
>
> I am fine if it is well-organized between you and Stephen.
Yep, that definitely works for me.
Sorry again,
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180613/206a5b4d/attachment.sig>
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2018-06-21 15:17 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-21 11:59 [GIT PULL] Allwinner clock changes for 4.18 Maxime Ripard
2018-05-21 11:59 ` Maxime Ripard
2018-06-01 17:25 ` Stephen Boyd
2018-06-01 17:25 ` Stephen Boyd
2018-06-11 2:00 ` Masahiro Yamada
2018-06-11 2:00 ` Masahiro Yamada
2018-06-11 7:53 ` Chen-Yu Tsai
2018-06-11 7:53 ` Chen-Yu Tsai
2018-06-12 8:00 ` Stephen Boyd
2018-06-12 8:00 ` Stephen Boyd
2018-06-12 8:38 ` Chen-Yu Tsai
2018-06-12 8:38 ` Chen-Yu Tsai
2018-06-20 2:14 ` Chen-Yu Tsai
2018-06-20 2:14 ` Chen-Yu Tsai
2018-06-21 15:17 ` Stephen Boyd
2018-06-21 15:17 ` Stephen Boyd
2018-06-13 7:26 ` Maxime Ripard
2018-06-13 7:26 ` Maxime Ripard
2018-06-13 8:16 ` Masahiro Yamada
2018-06-13 8:16 ` Masahiro Yamada
2018-06-13 9:11 ` Maxime Ripard
2018-06-13 9:11 ` Maxime Ripard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.