* [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
@ 2018-06-04 8:46 ` Claudiu Beznea
0 siblings, 0 replies; 18+ messages in thread
From: Claudiu Beznea @ 2018-06-04 8:46 UTC (permalink / raw)
To: linux-arm-kernel
Implement suspend/resume hooks.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
Changes in v2:
- use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
index 6c5708bacad8..ceaaef47f02e 100644
--- a/drivers/mtd/spi-nor/atmel-quadspi.c
+++ b/drivers/mtd/spi-nor/atmel-quadspi.c
@@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused atmel_qspi_suspend(struct device *dev)
+{
+ struct atmel_qspi *aq = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(aq->clk);
+
+ return 0;
+}
+
+static int __maybe_unused atmel_qspi_resume(struct device *dev)
+{
+ struct atmel_qspi *aq = dev_get_drvdata(dev);
+
+ clk_prepare_enable(aq->clk);
+
+ return atmel_qspi_init(aq);
+}
+
+static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
+ atmel_qspi_resume);
static const struct of_device_id atmel_qspi_dt_ids[] = {
{ .compatible = "atmel,sama5d2-qspi" },
@@ -749,6 +769,7 @@ static struct platform_driver atmel_qspi_driver = {
.driver = {
.name = "atmel_qspi",
.of_match_table = atmel_qspi_dt_ids,
+ .pm = &atmel_qspi_pm_ops,
},
.probe = atmel_qspi_probe,
.remove = atmel_qspi_remove,
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
2018-06-04 8:46 ` Claudiu Beznea
@ 2018-06-18 9:49 ` Boris Brezillon
-1 siblings, 0 replies; 18+ messages in thread
From: Boris Brezillon @ 2018-06-18 9:49 UTC (permalink / raw)
To: Claudiu Beznea
Cc: marek.vasut, dwmw2, computersforpeace, richard, nicolas.ferre,
alexandre.belloni, linux-mtd, linux-kernel, linux-arm-kernel
Hi Claudiu,
The subject prefix should be "mtd: spi-nor: atmel-quadspi: ". No need
to send a new version just for that, I'll fix it when applying the
patch.
Looks good otherwise. Marek, any objection? If not, can you add your
Acked-by?
Thanks,
Boris
On Mon, 4 Jun 2018 11:46:33 +0300
Claudiu Beznea <claudiu.beznea@microchip.com> wrote:
> Implement suspend/resume hooks.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>
> Changes in v2:
> - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
>
> drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
> index 6c5708bacad8..ceaaef47f02e 100644
> --- a/drivers/mtd/spi-nor/atmel-quadspi.c
> +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
> @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
> +{
> + struct atmel_qspi *aq = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(aq->clk);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused atmel_qspi_resume(struct device *dev)
> +{
> + struct atmel_qspi *aq = dev_get_drvdata(dev);
> +
> + clk_prepare_enable(aq->clk);
> +
> + return atmel_qspi_init(aq);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
> + atmel_qspi_resume);
>
> static const struct of_device_id atmel_qspi_dt_ids[] = {
> { .compatible = "atmel,sama5d2-qspi" },
> @@ -749,6 +769,7 @@ static struct platform_driver atmel_qspi_driver = {
> .driver = {
> .name = "atmel_qspi",
> .of_match_table = atmel_qspi_dt_ids,
> + .pm = &atmel_qspi_pm_ops,
> },
> .probe = atmel_qspi_probe,
> .remove = atmel_qspi_remove,
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
@ 2018-06-18 9:49 ` Boris Brezillon
0 siblings, 0 replies; 18+ messages in thread
From: Boris Brezillon @ 2018-06-18 9:49 UTC (permalink / raw)
To: linux-arm-kernel
Hi Claudiu,
The subject prefix should be "mtd: spi-nor: atmel-quadspi: ". No need
to send a new version just for that, I'll fix it when applying the
patch.
Looks good otherwise. Marek, any objection? If not, can you add your
Acked-by?
Thanks,
Boris
On Mon, 4 Jun 2018 11:46:33 +0300
Claudiu Beznea <claudiu.beznea@microchip.com> wrote:
> Implement suspend/resume hooks.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>
> Changes in v2:
> - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
>
> drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
> index 6c5708bacad8..ceaaef47f02e 100644
> --- a/drivers/mtd/spi-nor/atmel-quadspi.c
> +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
> @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
> +{
> + struct atmel_qspi *aq = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(aq->clk);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused atmel_qspi_resume(struct device *dev)
> +{
> + struct atmel_qspi *aq = dev_get_drvdata(dev);
> +
> + clk_prepare_enable(aq->clk);
> +
> + return atmel_qspi_init(aq);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
> + atmel_qspi_resume);
>
> static const struct of_device_id atmel_qspi_dt_ids[] = {
> { .compatible = "atmel,sama5d2-qspi" },
> @@ -749,6 +769,7 @@ static struct platform_driver atmel_qspi_driver = {
> .driver = {
> .name = "atmel_qspi",
> .of_match_table = atmel_qspi_dt_ids,
> + .pm = &atmel_qspi_pm_ops,
> },
> .probe = atmel_qspi_probe,
> .remove = atmel_qspi_remove,
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
2018-06-18 9:49 ` Boris Brezillon
@ 2018-06-18 9:53 ` Marek Vasut
-1 siblings, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2018-06-18 9:53 UTC (permalink / raw)
To: Boris Brezillon, Claudiu Beznea
Cc: dwmw2, computersforpeace, richard, nicolas.ferre,
alexandre.belloni, linux-mtd, linux-kernel, linux-arm-kernel
On 06/18/2018 11:49 AM, Boris Brezillon wrote:
> Hi Claudiu,
>
> The subject prefix should be "mtd: spi-nor: atmel-quadspi: ". No need
> to send a new version just for that, I'll fix it when applying the
> patch.
>
> Looks good otherwise. Marek, any objection? If not, can you add your
> Acked-by?
Will this work if you have ie. ubifs mounted on that QSPI NOR and you
suspect and resume during IO ? I think it would, but just curious if
there could be some problem.
> Thanks,
>
> Boris
>
> On Mon, 4 Jun 2018 11:46:33 +0300
> Claudiu Beznea <claudiu.beznea@microchip.com> wrote:
>
>> Implement suspend/resume hooks.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>>
>> Changes in v2:
>> - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
>>
>> drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
>> 1 file changed, 21 insertions(+)
>>
>> diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
>> index 6c5708bacad8..ceaaef47f02e 100644
>> --- a/drivers/mtd/spi-nor/atmel-quadspi.c
>> +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
>> @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
>> return 0;
>> }
>>
>> +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
>> +{
>> + struct atmel_qspi *aq = dev_get_drvdata(dev);
>> +
>> + clk_disable_unprepare(aq->clk);
>> +
>> + return 0;
>> +}
>> +
>> +static int __maybe_unused atmel_qspi_resume(struct device *dev)
>> +{
>> + struct atmel_qspi *aq = dev_get_drvdata(dev);
>> +
>> + clk_prepare_enable(aq->clk);
>> +
>> + return atmel_qspi_init(aq);
>> +}
>> +
>> +static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
>> + atmel_qspi_resume);
>>
>> static const struct of_device_id atmel_qspi_dt_ids[] = {
>> { .compatible = "atmel,sama5d2-qspi" },
>> @@ -749,6 +769,7 @@ static struct platform_driver atmel_qspi_driver = {
>> .driver = {
>> .name = "atmel_qspi",
>> .of_match_table = atmel_qspi_dt_ids,
>> + .pm = &atmel_qspi_pm_ops,
>> },
>> .probe = atmel_qspi_probe,
>> .remove = atmel_qspi_remove,
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
@ 2018-06-18 9:53 ` Marek Vasut
0 siblings, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2018-06-18 9:53 UTC (permalink / raw)
To: linux-arm-kernel
On 06/18/2018 11:49 AM, Boris Brezillon wrote:
> Hi Claudiu,
>
> The subject prefix should be "mtd: spi-nor: atmel-quadspi: ". No need
> to send a new version just for that, I'll fix it when applying the
> patch.
>
> Looks good otherwise. Marek, any objection? If not, can you add your
> Acked-by?
Will this work if you have ie. ubifs mounted on that QSPI NOR and you
suspect and resume during IO ? I think it would, but just curious if
there could be some problem.
> Thanks,
>
> Boris
>
> On Mon, 4 Jun 2018 11:46:33 +0300
> Claudiu Beznea <claudiu.beznea@microchip.com> wrote:
>
>> Implement suspend/resume hooks.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>>
>> Changes in v2:
>> - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
>>
>> drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
>> 1 file changed, 21 insertions(+)
>>
>> diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
>> index 6c5708bacad8..ceaaef47f02e 100644
>> --- a/drivers/mtd/spi-nor/atmel-quadspi.c
>> +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
>> @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
>> return 0;
>> }
>>
>> +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
>> +{
>> + struct atmel_qspi *aq = dev_get_drvdata(dev);
>> +
>> + clk_disable_unprepare(aq->clk);
>> +
>> + return 0;
>> +}
>> +
>> +static int __maybe_unused atmel_qspi_resume(struct device *dev)
>> +{
>> + struct atmel_qspi *aq = dev_get_drvdata(dev);
>> +
>> + clk_prepare_enable(aq->clk);
>> +
>> + return atmel_qspi_init(aq);
>> +}
>> +
>> +static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
>> + atmel_qspi_resume);
>>
>> static const struct of_device_id atmel_qspi_dt_ids[] = {
>> { .compatible = "atmel,sama5d2-qspi" },
>> @@ -749,6 +769,7 @@ static struct platform_driver atmel_qspi_driver = {
>> .driver = {
>> .name = "atmel_qspi",
>> .of_match_table = atmel_qspi_dt_ids,
>> + .pm = &atmel_qspi_pm_ops,
>> },
>> .probe = atmel_qspi_probe,
>> .remove = atmel_qspi_remove,
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
2018-06-18 9:53 ` Marek Vasut
@ 2018-06-18 12:00 ` Claudiu Beznea
-1 siblings, 0 replies; 18+ messages in thread
From: Claudiu Beznea @ 2018-06-18 12:00 UTC (permalink / raw)
To: Marek Vasut, Boris Brezillon
Cc: dwmw2, computersforpeace, richard, nicolas.ferre,
alexandre.belloni, linux-mtd, linux-kernel, linux-arm-kernel
On 18.06.2018 12:53, Marek Vasut wrote:
> On 06/18/2018 11:49 AM, Boris Brezillon wrote:
>> Hi Claudiu,
>>
>> The subject prefix should be "mtd: spi-nor: atmel-quadspi: ". No need
>> to send a new version just for that, I'll fix it when applying the
>> patch.
>>
Hi Boris,
Thank you!
>> Looks good otherwise. Marek, any objection? If not, can you add your
>> Acked-by?
>
> Will this work if you have ie. ubifs mounted on that QSPI NOR and you
> suspect and resume during IO ? I think it would, but just curious if
> there could be some problem.
Hi Marek,
I tested only with read/writes while suspending, simple scripts, but not
having ubifs mounted on QSPI NOR. I will double check also with ubifs
mounted on QSPI NOR and come back with the results.
Thank you,
Claudiu
>
>> Thanks,
>>
>> Boris
>>
>> On Mon, 4 Jun 2018 11:46:33 +0300
>> Claudiu Beznea <claudiu.beznea@microchip.com> wrote:
>>
>>> Implement suspend/resume hooks.
>>>
>>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>>> ---
>>>
>>> Changes in v2:
>>> - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
>>>
>>> drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
>>> 1 file changed, 21 insertions(+)
>>>
>>> diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
>>> index 6c5708bacad8..ceaaef47f02e 100644
>>> --- a/drivers/mtd/spi-nor/atmel-quadspi.c
>>> +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
>>> @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
>>> return 0;
>>> }
>>>
>>> +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
>>> +{
>>> + struct atmel_qspi *aq = dev_get_drvdata(dev);
>>> +
>>> + clk_disable_unprepare(aq->clk);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int __maybe_unused atmel_qspi_resume(struct device *dev)
>>> +{
>>> + struct atmel_qspi *aq = dev_get_drvdata(dev);
>>> +
>>> + clk_prepare_enable(aq->clk);
>>> +
>>> + return atmel_qspi_init(aq);
>>> +}
>>> +
>>> +static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
>>> + atmel_qspi_resume);
>>>
>>> static const struct of_device_id atmel_qspi_dt_ids[] = {
>>> { .compatible = "atmel,sama5d2-qspi" },
>>> @@ -749,6 +769,7 @@ static struct platform_driver atmel_qspi_driver = {
>>> .driver = {
>>> .name = "atmel_qspi",
>>> .of_match_table = atmel_qspi_dt_ids,
>>> + .pm = &atmel_qspi_pm_ops,
>>> },
>>> .probe = atmel_qspi_probe,
>>> .remove = atmel_qspi_remove,
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
@ 2018-06-18 12:00 ` Claudiu Beznea
0 siblings, 0 replies; 18+ messages in thread
From: Claudiu Beznea @ 2018-06-18 12:00 UTC (permalink / raw)
To: linux-arm-kernel
On 18.06.2018 12:53, Marek Vasut wrote:
> On 06/18/2018 11:49 AM, Boris Brezillon wrote:
>> Hi Claudiu,
>>
>> The subject prefix should be "mtd: spi-nor: atmel-quadspi: ". No need
>> to send a new version just for that, I'll fix it when applying the
>> patch.
>>
Hi Boris,
Thank you!
>> Looks good otherwise. Marek, any objection? If not, can you add your
>> Acked-by?
>
> Will this work if you have ie. ubifs mounted on that QSPI NOR and you
> suspect and resume during IO ? I think it would, but just curious if
> there could be some problem.
Hi Marek,
I tested only with read/writes while suspending, simple scripts, but not
having ubifs mounted on QSPI NOR. I will double check also with ubifs
mounted on QSPI NOR and come back with the results.
Thank you,
Claudiu
>
>> Thanks,
>>
>> Boris
>>
>> On Mon, 4 Jun 2018 11:46:33 +0300
>> Claudiu Beznea <claudiu.beznea@microchip.com> wrote:
>>
>>> Implement suspend/resume hooks.
>>>
>>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>>> ---
>>>
>>> Changes in v2:
>>> - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
>>>
>>> drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
>>> 1 file changed, 21 insertions(+)
>>>
>>> diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
>>> index 6c5708bacad8..ceaaef47f02e 100644
>>> --- a/drivers/mtd/spi-nor/atmel-quadspi.c
>>> +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
>>> @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
>>> return 0;
>>> }
>>>
>>> +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
>>> +{
>>> + struct atmel_qspi *aq = dev_get_drvdata(dev);
>>> +
>>> + clk_disable_unprepare(aq->clk);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int __maybe_unused atmel_qspi_resume(struct device *dev)
>>> +{
>>> + struct atmel_qspi *aq = dev_get_drvdata(dev);
>>> +
>>> + clk_prepare_enable(aq->clk);
>>> +
>>> + return atmel_qspi_init(aq);
>>> +}
>>> +
>>> +static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
>>> + atmel_qspi_resume);
>>>
>>> static const struct of_device_id atmel_qspi_dt_ids[] = {
>>> { .compatible = "atmel,sama5d2-qspi" },
>>> @@ -749,6 +769,7 @@ static struct platform_driver atmel_qspi_driver = {
>>> .driver = {
>>> .name = "atmel_qspi",
>>> .of_match_table = atmel_qspi_dt_ids,
>>> + .pm = &atmel_qspi_pm_ops,
>>> },
>>> .probe = atmel_qspi_probe,
>>> .remove = atmel_qspi_remove,
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
2018-06-18 12:00 ` Claudiu Beznea
@ 2018-06-19 1:28 ` Marek Vasut
-1 siblings, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2018-06-19 1:28 UTC (permalink / raw)
To: Claudiu Beznea, Boris Brezillon
Cc: dwmw2, computersforpeace, richard, nicolas.ferre,
alexandre.belloni, linux-mtd, linux-kernel, linux-arm-kernel
On 06/18/2018 02:00 PM, Claudiu Beznea wrote:
>
>
> On 18.06.2018 12:53, Marek Vasut wrote:
>> On 06/18/2018 11:49 AM, Boris Brezillon wrote:
>>> Hi Claudiu,
>>>
>>> The subject prefix should be "mtd: spi-nor: atmel-quadspi: ". No need
>>> to send a new version just for that, I'll fix it when applying the
>>> patch.
>>>
> Hi Boris,
>
> Thank you!
>
>>> Looks good otherwise. Marek, any objection? If not, can you add your
>>> Acked-by?
>>
>> Will this work if you have ie. ubifs mounted on that QSPI NOR and you
>> suspect and resume during IO ? I think it would, but just curious if
>> there could be some problem.
>
> Hi Marek,
>
> I tested only with read/writes while suspending, simple scripts, but not
> having ubifs mounted on QSPI NOR. I will double check also with ubifs
> mounted on QSPI NOR and come back with the results.
Thanks. I think it's gonna be OK, but let's just be sure.
Make sure to disable 4K sector support when fiddling with UBI/UBIFS on
QSPI NOR.
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
@ 2018-06-19 1:28 ` Marek Vasut
0 siblings, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2018-06-19 1:28 UTC (permalink / raw)
To: linux-arm-kernel
On 06/18/2018 02:00 PM, Claudiu Beznea wrote:
>
>
> On 18.06.2018 12:53, Marek Vasut wrote:
>> On 06/18/2018 11:49 AM, Boris Brezillon wrote:
>>> Hi Claudiu,
>>>
>>> The subject prefix should be "mtd: spi-nor: atmel-quadspi: ". No need
>>> to send a new version just for that, I'll fix it when applying the
>>> patch.
>>>
> Hi Boris,
>
> Thank you!
>
>>> Looks good otherwise. Marek, any objection? If not, can you add your
>>> Acked-by?
>>
>> Will this work if you have ie. ubifs mounted on that QSPI NOR and you
>> suspect and resume during IO ? I think it would, but just curious if
>> there could be some problem.
>
> Hi Marek,
>
> I tested only with read/writes while suspending, simple scripts, but not
> having ubifs mounted on QSPI NOR. I will double check also with ubifs
> mounted on QSPI NOR and come back with the results.
Thanks. I think it's gonna be OK, but let's just be sure.
Make sure to disable 4K sector support when fiddling with UBI/UBIFS on
QSPI NOR.
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
2018-06-19 1:28 ` Marek Vasut
@ 2018-06-21 13:16 ` Claudiu Beznea
-1 siblings, 0 replies; 18+ messages in thread
From: Claudiu Beznea @ 2018-06-21 13:16 UTC (permalink / raw)
To: Marek Vasut, Boris Brezillon
Cc: dwmw2, computersforpeace, richard, nicolas.ferre,
alexandre.belloni, linux-mtd, linux-kernel, linux-arm-kernel
Hi Marek,
On 19.06.2018 04:28, Marek Vasut wrote:
> On 06/18/2018 02:00 PM, Claudiu Beznea wrote:
>>
>>
>> On 18.06.2018 12:53, Marek Vasut wrote:
>>> On 06/18/2018 11:49 AM, Boris Brezillon wrote:
>>>> Hi Claudiu,
>>>>
>>>> The subject prefix should be "mtd: spi-nor: atmel-quadspi: ". No need
>>>> to send a new version just for that, I'll fix it when applying the
>>>> patch.
>>>>
>> Hi Boris,
>>
>> Thank you!
>>
>>>> Looks good otherwise. Marek, any objection? If not, can you add your
>>>> Acked-by?
>>>
>>> Will this work if you have ie. ubifs mounted on that QSPI NOR and you
>>> suspect and resume during IO ? I think it would, but just curious if
>>> there could be some problem.
>>
>> Hi Marek,
>>
>> I tested only with read/writes while suspending, simple scripts, but not
>> having ubifs mounted on QSPI NOR. I will double check also with ubifs
>> mounted on QSPI NOR and come back with the results.
>
> Thanks. I think it's gonna be OK, but let's just be sure.
> Make sure to disable 4K sector support when fiddling with UBI/UBIFS on
> QSPI NOR.
I did the following to test this patch with ubifs:
1. disabled CONFIG_MTD_SPI_NOR_USE_4K_SECTORS and build kernel
2. create a ubifs image:
mkfs.ubifs -r /mnt/ubifs-sama5d2-rootfs -m 1 -e 65408 -c 3739 \
-o /mnt/sama5d2-xplained-ubifs.img
3. boot the board and check partitions:
cat /proc/mtd
dev: size erasesize name
mtd0: 00010000 00010000 "at91bootstrap"
mtd1: 00010000 00010000 "bootloader env"
mtd2: 00050000 00010000 "bootloader"
mtd3: 00010000 00010000 "device tree"
mtd4: 00380000 00010000 "kernel"
mtd5: 01c00000 00010000 "rootfs"
mtd6: 00400000 00010000 "spi32766.0"
4. ubiformat /dev/mtd5
5. ubiattach -p /dev/mtd5
6. ubimkvol /dev/ubi0 -N test -s 28910336
7. ubiupdatevol /dev/ubi0_0 /sama5d2-xplained-buildroot-ubifs.img
8. mount -t ubifs ubi0:test /mnt
9. cd /mnt/; ls /mnt/
bin lib media proc sbin usr
dev lib32 mnt root sys var
etc linuxrc opt run tmp
10. Create a file with dd on ubifs partition:
dd if=/dev/urandom of=test.bin bs=1024 count=8K
11. compute md5sum on this file:
md5sum test.bin > test.md5
12. Measure how much will take to copy that file (to be sure the copy
operation is not done before suspending):
date; cp test.bin test-pm.bin; date
Wed Jun 20 13:20:34 UTC 2018
Wed Jun 20 13:21:14 UTC 2018
13. Copy, sync, and switch to suspend-to-mem:
cp test.bin test-pm.bin &
sync &
echo mem > /sys/power/state
14. Check md5sum of test-pm.bin and compare it with md5sum of test.bin:
md5sum test-pm.bin > test-pm.md5
cat test.md5
b5338647572b9665f24c61db98601522 test.bin
cat test-pm.md5
b5338647572b9665f24c61db98601522 test-pm.bin
Please let me know if this is enough!
Thank you,
Claudiu Beznea
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
@ 2018-06-21 13:16 ` Claudiu Beznea
0 siblings, 0 replies; 18+ messages in thread
From: Claudiu Beznea @ 2018-06-21 13:16 UTC (permalink / raw)
To: linux-arm-kernel
Hi Marek,
On 19.06.2018 04:28, Marek Vasut wrote:
> On 06/18/2018 02:00 PM, Claudiu Beznea wrote:
>>
>>
>> On 18.06.2018 12:53, Marek Vasut wrote:
>>> On 06/18/2018 11:49 AM, Boris Brezillon wrote:
>>>> Hi Claudiu,
>>>>
>>>> The subject prefix should be "mtd: spi-nor: atmel-quadspi: ". No need
>>>> to send a new version just for that, I'll fix it when applying the
>>>> patch.
>>>>
>> Hi Boris,
>>
>> Thank you!
>>
>>>> Looks good otherwise. Marek, any objection? If not, can you add your
>>>> Acked-by?
>>>
>>> Will this work if you have ie. ubifs mounted on that QSPI NOR and you
>>> suspect and resume during IO ? I think it would, but just curious if
>>> there could be some problem.
>>
>> Hi Marek,
>>
>> I tested only with read/writes while suspending, simple scripts, but not
>> having ubifs mounted on QSPI NOR. I will double check also with ubifs
>> mounted on QSPI NOR and come back with the results.
>
> Thanks. I think it's gonna be OK, but let's just be sure.
> Make sure to disable 4K sector support when fiddling with UBI/UBIFS on
> QSPI NOR.
I did the following to test this patch with ubifs:
1. disabled CONFIG_MTD_SPI_NOR_USE_4K_SECTORS and build kernel
2. create a ubifs image:
mkfs.ubifs -r /mnt/ubifs-sama5d2-rootfs -m 1 -e 65408 -c 3739 \
-o /mnt/sama5d2-xplained-ubifs.img
3. boot the board and check partitions:
cat /proc/mtd
dev: size erasesize name
mtd0: 00010000 00010000 "at91bootstrap"
mtd1: 00010000 00010000 "bootloader env"
mtd2: 00050000 00010000 "bootloader"
mtd3: 00010000 00010000 "device tree"
mtd4: 00380000 00010000 "kernel"
mtd5: 01c00000 00010000 "rootfs"
mtd6: 00400000 00010000 "spi32766.0"
4. ubiformat /dev/mtd5
5. ubiattach -p /dev/mtd5
6. ubimkvol /dev/ubi0 -N test -s 28910336
7. ubiupdatevol /dev/ubi0_0 /sama5d2-xplained-buildroot-ubifs.img
8. mount -t ubifs ubi0:test /mnt
9. cd /mnt/; ls /mnt/
bin lib media proc sbin usr
dev lib32 mnt root sys var
etc linuxrc opt run tmp
10. Create a file with dd on ubifs partition:
dd if=/dev/urandom of=test.bin bs=1024 count=8K
11. compute md5sum on this file:
md5sum test.bin > test.md5
12. Measure how much will take to copy that file (to be sure the copy
operation is not done before suspending):
date; cp test.bin test-pm.bin; date
Wed Jun 20 13:20:34 UTC 2018
Wed Jun 20 13:21:14 UTC 2018
13. Copy, sync, and switch to suspend-to-mem:
cp test.bin test-pm.bin &
sync &
echo mem > /sys/power/state
14. Check md5sum of test-pm.bin and compare it with md5sum of test.bin:
md5sum test-pm.bin > test-pm.md5
cat test.md5
b5338647572b9665f24c61db98601522 test.bin
cat test-pm.md5
b5338647572b9665f24c61db98601522 test-pm.bin
Please let me know if this is enough!
Thank you,
Claudiu Beznea
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
2018-06-04 8:46 ` Claudiu Beznea
@ 2018-07-04 8:42 ` Tudor Ambarus
-1 siblings, 0 replies; 18+ messages in thread
From: Tudor Ambarus @ 2018-07-04 8:42 UTC (permalink / raw)
To: Claudiu Beznea, marek.vasut, dwmw2, computersforpeace,
boris.brezillon, richard, nicolas.ferre, alexandre.belloni
Cc: linux-mtd, linux-kernel, linux-arm-kernel
Hi, Claudiu,
On 06/04/2018 11:46 AM, Claudiu Beznea wrote:
> Implement suspend/resume hooks.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>
> Changes in v2:
> - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
>
> drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
> index 6c5708bacad8..ceaaef47f02e 100644
> --- a/drivers/mtd/spi-nor/atmel-quadspi.c
> +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
> @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
> +{
> + struct atmel_qspi *aq = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(aq->clk);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused atmel_qspi_resume(struct device *dev)
> +{
> + struct atmel_qspi *aq = dev_get_drvdata(dev);
> +
> + clk_prepare_enable(aq->clk);
You missed to verify the return value of clk_prepare_enable. Otherwise looks
good. I've also looked over the test with suspending while copying on a ubifs
mounted on QSPI NOR, looks good too.
After checking the return value, please add:
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Best,
ta
> +
> + return atmel_qspi_init(aq);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
> + atmel_qspi_resume);
>
> static const struct of_device_id atmel_qspi_dt_ids[] = {
> { .compatible = "atmel,sama5d2-qspi" },
> @@ -749,6 +769,7 @@ static struct platform_driver atmel_qspi_driver = {
> .driver = {
> .name = "atmel_qspi",
> .of_match_table = atmel_qspi_dt_ids,
> + .pm = &atmel_qspi_pm_ops,
> },
> .probe = atmel_qspi_probe,
> .remove = atmel_qspi_remove,
>
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
@ 2018-07-04 8:42 ` Tudor Ambarus
0 siblings, 0 replies; 18+ messages in thread
From: Tudor Ambarus @ 2018-07-04 8:42 UTC (permalink / raw)
To: linux-arm-kernel
Hi, Claudiu,
On 06/04/2018 11:46 AM, Claudiu Beznea wrote:
> Implement suspend/resume hooks.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>
> Changes in v2:
> - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
>
> drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
> index 6c5708bacad8..ceaaef47f02e 100644
> --- a/drivers/mtd/spi-nor/atmel-quadspi.c
> +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
> @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
> +{
> + struct atmel_qspi *aq = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(aq->clk);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused atmel_qspi_resume(struct device *dev)
> +{
> + struct atmel_qspi *aq = dev_get_drvdata(dev);
> +
> + clk_prepare_enable(aq->clk);
You missed to verify the return value of clk_prepare_enable. Otherwise looks
good. I've also looked over the test with suspending while copying on a ubifs
mounted on QSPI NOR, looks good too.
After checking the return value, please add:
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Best,
ta
> +
> + return atmel_qspi_init(aq);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
> + atmel_qspi_resume);
>
> static const struct of_device_id atmel_qspi_dt_ids[] = {
> { .compatible = "atmel,sama5d2-qspi" },
> @@ -749,6 +769,7 @@ static struct platform_driver atmel_qspi_driver = {
> .driver = {
> .name = "atmel_qspi",
> .of_match_table = atmel_qspi_dt_ids,
> + .pm = &atmel_qspi_pm_ops,
> },
> .probe = atmel_qspi_probe,
> .remove = atmel_qspi_remove,
>
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
2018-07-04 8:42 ` Tudor Ambarus
@ 2018-07-04 8:57 ` Alexandre Belloni
-1 siblings, 0 replies; 18+ messages in thread
From: Alexandre Belloni @ 2018-07-04 8:57 UTC (permalink / raw)
To: Tudor Ambarus
Cc: Claudiu Beznea, marek.vasut, dwmw2, computersforpeace,
boris.brezillon, richard, nicolas.ferre, linux-mtd, linux-kernel,
linux-arm-kernel
On 04/07/2018 11:42:25+0300, Tudor Ambarus wrote:
> Hi, Claudiu,
>
> On 06/04/2018 11:46 AM, Claudiu Beznea wrote:
> > Implement suspend/resume hooks.
> >
> > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> > ---
> >
> > Changes in v2:
> > - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
> >
> > drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
> > 1 file changed, 21 insertions(+)
> >
> > diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
> > index 6c5708bacad8..ceaaef47f02e 100644
> > --- a/drivers/mtd/spi-nor/atmel-quadspi.c
> > +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
> > @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
> > +{
> > + struct atmel_qspi *aq = dev_get_drvdata(dev);
> > +
> > + clk_disable_unprepare(aq->clk);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused atmel_qspi_resume(struct device *dev)
> > +{
> > + struct atmel_qspi *aq = dev_get_drvdata(dev);
> > +
> > + clk_prepare_enable(aq->clk);
>
> You missed to verify the return value of clk_prepare_enable. Otherwise looks
Which will never fail, there is no point in checking it.
> good. I've also looked over the test with suspending while copying on a ubifs
> mounted on QSPI NOR, looks good too.
>
> After checking the return value, please add:
> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>
--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
@ 2018-07-04 8:57 ` Alexandre Belloni
0 siblings, 0 replies; 18+ messages in thread
From: Alexandre Belloni @ 2018-07-04 8:57 UTC (permalink / raw)
To: linux-arm-kernel
On 04/07/2018 11:42:25+0300, Tudor Ambarus wrote:
> Hi, Claudiu,
>
> On 06/04/2018 11:46 AM, Claudiu Beznea wrote:
> > Implement suspend/resume hooks.
> >
> > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> > ---
> >
> > Changes in v2:
> > - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
> >
> > drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
> > 1 file changed, 21 insertions(+)
> >
> > diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
> > index 6c5708bacad8..ceaaef47f02e 100644
> > --- a/drivers/mtd/spi-nor/atmel-quadspi.c
> > +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
> > @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
> > +{
> > + struct atmel_qspi *aq = dev_get_drvdata(dev);
> > +
> > + clk_disable_unprepare(aq->clk);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused atmel_qspi_resume(struct device *dev)
> > +{
> > + struct atmel_qspi *aq = dev_get_drvdata(dev);
> > +
> > + clk_prepare_enable(aq->clk);
>
> You missed to verify the return value of clk_prepare_enable. Otherwise looks
Which will never fail, there is no point in checking it.
> good. I've also looked over the test with suspending while copying on a ubifs
> mounted on QSPI NOR, looks good too.
>
> After checking the return value, please add:
> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>
--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
2018-07-04 8:57 ` Alexandre Belloni
@ 2018-07-07 10:08 ` Boris Brezillon
-1 siblings, 0 replies; 18+ messages in thread
From: Boris Brezillon @ 2018-07-07 10:08 UTC (permalink / raw)
To: Alexandre Belloni
Cc: Tudor Ambarus, Claudiu Beznea, marek.vasut, dwmw2,
computersforpeace, richard, nicolas.ferre, linux-mtd,
linux-kernel, linux-arm-kernel
On Wed, 4 Jul 2018 10:57:11 +0200
Alexandre Belloni <alexandre.belloni@bootlin.com> wrote:
> On 04/07/2018 11:42:25+0300, Tudor Ambarus wrote:
> > Hi, Claudiu,
> >
> > On 06/04/2018 11:46 AM, Claudiu Beznea wrote:
> > > Implement suspend/resume hooks.
> > >
> > > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Applied.
Thanks,
Boris
> > > ---
> > >
> > > Changes in v2:
> > > - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
> > >
> > > drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
> > > 1 file changed, 21 insertions(+)
> > >
> > > diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
> > > index 6c5708bacad8..ceaaef47f02e 100644
> > > --- a/drivers/mtd/spi-nor/atmel-quadspi.c
> > > +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
> > > @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
> > > return 0;
> > > }
> > >
> > > +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
> > > +{
> > > + struct atmel_qspi *aq = dev_get_drvdata(dev);
> > > +
> > > + clk_disable_unprepare(aq->clk);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int __maybe_unused atmel_qspi_resume(struct device *dev)
> > > +{
> > > + struct atmel_qspi *aq = dev_get_drvdata(dev);
> > > +
> > > + clk_prepare_enable(aq->clk);
> >
> > You missed to verify the return value of clk_prepare_enable. Otherwise looks
>
> Which will never fail, there is no point in checking it.
>
> > good. I've also looked over the test with suspending while copying on a ubifs
> > mounted on QSPI NOR, looks good too.
> >
> > After checking the return value, please add:
> > Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> >
>
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH v2] mtd: atmel-quadspi: add suspend/resume hooks
@ 2018-07-07 10:08 ` Boris Brezillon
0 siblings, 0 replies; 18+ messages in thread
From: Boris Brezillon @ 2018-07-07 10:08 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 4 Jul 2018 10:57:11 +0200
Alexandre Belloni <alexandre.belloni@bootlin.com> wrote:
> On 04/07/2018 11:42:25+0300, Tudor Ambarus wrote:
> > Hi, Claudiu,
> >
> > On 06/04/2018 11:46 AM, Claudiu Beznea wrote:
> > > Implement suspend/resume hooks.
> > >
> > > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Applied.
Thanks,
Boris
> > > ---
> > >
> > > Changes in v2:
> > > - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP
> > >
> > > drivers/mtd/spi-nor/atmel-quadspi.c | 21 +++++++++++++++++++++
> > > 1 file changed, 21 insertions(+)
> > >
> > > diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
> > > index 6c5708bacad8..ceaaef47f02e 100644
> > > --- a/drivers/mtd/spi-nor/atmel-quadspi.c
> > > +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
> > > @@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
> > > return 0;
> > > }
> > >
> > > +static int __maybe_unused atmel_qspi_suspend(struct device *dev)
> > > +{
> > > + struct atmel_qspi *aq = dev_get_drvdata(dev);
> > > +
> > > + clk_disable_unprepare(aq->clk);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int __maybe_unused atmel_qspi_resume(struct device *dev)
> > > +{
> > > + struct atmel_qspi *aq = dev_get_drvdata(dev);
> > > +
> > > + clk_prepare_enable(aq->clk);
> >
> > You missed to verify the return value of clk_prepare_enable. Otherwise looks
>
> Which will never fail, there is no point in checking it.
>
> > good. I've also looked over the test with suspending while copying on a ubifs
> > mounted on QSPI NOR, looks good too.
> >
> > After checking the return value, please add:
> > Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> >
>
^ permalink raw reply [flat|nested] 18+ messages in thread