* [Qemu-devel] [PATCH] xilinx_spips: Make dma transactions as per dma_burst_size
@ 2018-06-14 5:27 Sai Pavan Boddu
2018-06-14 11:25 ` Edgar E. Iglesias
0 siblings, 1 reply; 4+ messages in thread
From: Sai Pavan Boddu @ 2018-06-14 5:27 UTC (permalink / raw)
To: qemu-devel
Cc: Alistair Francis, Peter Crosthwaite, Peter Maydell,
Edgar E. Iglesias, Francisco Iglesias
Qspi dma has a burst length of 64 bytes, So limit transaction length to
64 max.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
---
hw/ssi/xilinx_spips.c | 18 +++++++++++++++---
include/hw/ssi/xilinx_spips.h | 3 ++-
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index 03f5fae..ea006c4 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -851,12 +851,17 @@ static void xlnx_zynqmp_qspips_notify(void *opaque)
{
size_t ret;
uint32_t num;
- const void *rxd = pop_buf(recv_fifo, 4, &num);
+ const void *rxd;
+ int len;
+
+ len = recv_fifo->num >= rq->dma_burst_size ? rq->dma_burst_size :
+ recv_fifo->num;
+ rxd = pop_buf(recv_fifo, len, &num);
memcpy(rq->dma_buf, rxd, num);
- ret = stream_push(rq->dma, rq->dma_buf, 4);
- assert(ret == 4);
+ ret = stream_push(rq->dma, rq->dma_buf, num);
+ assert(ret == num);
xlnx_zynqmp_qspips_check_flush(rq);
}
}
@@ -1337,6 +1342,7 @@ static void xlnx_zynqmp_qspips_realize(DeviceState *dev, Error **errp)
fifo8_create(&s->rx_fifo_g, xsc->rx_fifo_size);
fifo8_create(&s->tx_fifo_g, xsc->tx_fifo_size);
fifo32_create(&s->fifo_g, 32);
+ s->dma_buf = g_new0(uint8_t, s->dma_burst_size);
}
static void xlnx_zynqmp_qspips_init(Object *obj)
@@ -1411,6 +1417,11 @@ static const VMStateDescription vmstate_xlnx_zynqmp_qspips = {
}
};
+static Property xilinx_zynqmp_qspips_properties[] = {
+ DEFINE_PROP_UINT32("dma-burst-size", XlnxZynqMPQSPIPS, dma_burst_size, 64),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
static Property xilinx_qspips_properties[] = {
/* We had to turn this off for 2.10 as it is not compatible with migration.
* It can be enabled but will prevent the device to be migrated.
@@ -1463,6 +1474,7 @@ static void xlnx_zynqmp_qspips_class_init(ObjectClass *klass, void * data)
dc->realize = xlnx_zynqmp_qspips_realize;
dc->reset = xlnx_zynqmp_qspips_reset;
dc->vmsd = &vmstate_xlnx_zynqmp_qspips;
+ dc->props = xilinx_zynqmp_qspips_properties;
xsc->reg_ops = &xlnx_zynqmp_qspips_ops;
xsc->rx_fifo_size = RXFF_A_Q;
xsc->tx_fifo_size = TXFF_A_Q;
diff --git a/include/hw/ssi/xilinx_spips.h b/include/hw/ssi/xilinx_spips.h
index d398a4e..cca1813 100644
--- a/include/hw/ssi/xilinx_spips.h
+++ b/include/hw/ssi/xilinx_spips.h
@@ -95,7 +95,8 @@ typedef struct {
XilinxQSPIPS parent_obj;
StreamSlave *dma;
- uint8_t dma_buf[4];
+ uint8_t *dma_buf;
+ uint32_t dma_burst_size;
int gqspi_irqline;
uint32_t regs[XLNX_ZYNQMP_SPIPS_R_MAX];
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH] xilinx_spips: Make dma transactions as per dma_burst_size
2018-06-14 5:27 [Qemu-devel] [PATCH] xilinx_spips: Make dma transactions as per dma_burst_size Sai Pavan Boddu
@ 2018-06-14 11:25 ` Edgar E. Iglesias
2018-06-19 20:26 ` Sai Pavan Boddu
0 siblings, 1 reply; 4+ messages in thread
From: Edgar E. Iglesias @ 2018-06-14 11:25 UTC (permalink / raw)
To: Sai Pavan Boddu
Cc: qemu-devel, Alistair Francis, Peter Crosthwaite, Peter Maydell,
Francisco Iglesias
On Thu, Jun 14, 2018 at 10:57:04AM +0530, Sai Pavan Boddu wrote:
> Qspi dma has a burst length of 64 bytes, So limit transaction length to
> 64 max.
Hi Sai,
Is this a v2 or a resend?
>
> Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
> ---
> hw/ssi/xilinx_spips.c | 18 +++++++++++++++---
> include/hw/ssi/xilinx_spips.h | 3 ++-
> 2 files changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
> index 03f5fae..ea006c4 100644
> --- a/hw/ssi/xilinx_spips.c
> +++ b/hw/ssi/xilinx_spips.c
> @@ -851,12 +851,17 @@ static void xlnx_zynqmp_qspips_notify(void *opaque)
> {
> size_t ret;
> uint32_t num;
> - const void *rxd = pop_buf(recv_fifo, 4, &num);
> + const void *rxd;
> + int len;
> +
> + len = recv_fifo->num >= rq->dma_burst_size ? rq->dma_burst_size :
> + recv_fifo->num;
> + rxd = pop_buf(recv_fifo, len, &num);
>
> memcpy(rq->dma_buf, rxd, num);
>
> - ret = stream_push(rq->dma, rq->dma_buf, 4);
> - assert(ret == 4);
> + ret = stream_push(rq->dma, rq->dma_buf, num);
> + assert(ret == num);
> xlnx_zynqmp_qspips_check_flush(rq);
> }
> }
> @@ -1337,6 +1342,7 @@ static void xlnx_zynqmp_qspips_realize(DeviceState *dev, Error **errp)
> fifo8_create(&s->rx_fifo_g, xsc->rx_fifo_size);
> fifo8_create(&s->tx_fifo_g, xsc->tx_fifo_size);
> fifo32_create(&s->fifo_g, 32);
> + s->dma_buf = g_new0(uint8_t, s->dma_burst_size);
This would need to be free'd somewhere.
But I think you should put a reasonably small limit on the burst size that users can
configure and then you can allocate this as an array in XlnxZynqMPQSPIPS.
> }
>
> static void xlnx_zynqmp_qspips_init(Object *obj)
> @@ -1411,6 +1417,11 @@ static const VMStateDescription vmstate_xlnx_zynqmp_qspips = {
> }
> };
>
> +static Property xilinx_zynqmp_qspips_properties[] = {
> + DEFINE_PROP_UINT32("dma-burst-size", XlnxZynqMPQSPIPS, dma_burst_size, 64),
You need to limit this so users dont pick 4G. Perhaps 2 or 4K max.
Cheers,
Edgar
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> static Property xilinx_qspips_properties[] = {
> /* We had to turn this off for 2.10 as it is not compatible with migration.
> * It can be enabled but will prevent the device to be migrated.
> @@ -1463,6 +1474,7 @@ static void xlnx_zynqmp_qspips_class_init(ObjectClass *klass, void * data)
> dc->realize = xlnx_zynqmp_qspips_realize;
> dc->reset = xlnx_zynqmp_qspips_reset;
> dc->vmsd = &vmstate_xlnx_zynqmp_qspips;
> + dc->props = xilinx_zynqmp_qspips_properties;
> xsc->reg_ops = &xlnx_zynqmp_qspips_ops;
> xsc->rx_fifo_size = RXFF_A_Q;
> xsc->tx_fifo_size = TXFF_A_Q;
> diff --git a/include/hw/ssi/xilinx_spips.h b/include/hw/ssi/xilinx_spips.h
> index d398a4e..cca1813 100644
> --- a/include/hw/ssi/xilinx_spips.h
> +++ b/include/hw/ssi/xilinx_spips.h
> @@ -95,7 +95,8 @@ typedef struct {
> XilinxQSPIPS parent_obj;
>
> StreamSlave *dma;
> - uint8_t dma_buf[4];
> + uint8_t *dma_buf;
> + uint32_t dma_burst_size;
> int gqspi_irqline;
>
> uint32_t regs[XLNX_ZYNQMP_SPIPS_R_MAX];
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH] xilinx_spips: Make dma transactions as per dma_burst_size
2018-06-14 11:25 ` Edgar E. Iglesias
@ 2018-06-19 20:26 ` Sai Pavan Boddu
0 siblings, 0 replies; 4+ messages in thread
From: Sai Pavan Boddu @ 2018-06-19 20:26 UTC (permalink / raw)
To: Edgar Iglesias
Cc: qemu-devel, Alistair Francis, Peter Crosthwaite, Peter Maydell,
Francisco Iglesias
Hi Edgar,
I got your suggestion below. Will be sending a V2 asap.
Thanks,
Sai Pavan
> -----Original Message-----
> From: Edgar E. Iglesias [mailto:edgar.iglesias@xilinx.com]
> Sent: Thursday, June 14, 2018 4:55 PM
> To: Sai Pavan Boddu <saipava@xilinx.com>
> Cc: qemu-devel@nongnu.org; Alistair Francis <alistair@alistair23.me>; Peter
> Crosthwaite <crosthwaite.peter@gmail.com>; Peter Maydell
> <peter.maydell@linaro.org>; Francisco Iglesias <frasse.iglesias@gmail.com>
> Subject: Re: [PATCH] xilinx_spips: Make dma transactions as per dma_burst_size
>
> On Thu, Jun 14, 2018 at 10:57:04AM +0530, Sai Pavan Boddu wrote:
> > Qspi dma has a burst length of 64 bytes, So limit transaction length
> > to
> > 64 max.
>
> Hi Sai,
>
> Is this a v2 or a resend?
>
> >
> > Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
> > ---
> > hw/ssi/xilinx_spips.c | 18 +++++++++++++++---
> > include/hw/ssi/xilinx_spips.h | 3 ++-
> > 2 files changed, 17 insertions(+), 4 deletions(-)
> >
> > diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index
> > 03f5fae..ea006c4 100644
> > --- a/hw/ssi/xilinx_spips.c
> > +++ b/hw/ssi/xilinx_spips.c
> > @@ -851,12 +851,17 @@ static void xlnx_zynqmp_qspips_notify(void
> *opaque)
> > {
> > size_t ret;
> > uint32_t num;
> > - const void *rxd = pop_buf(recv_fifo, 4, &num);
> > + const void *rxd;
> > + int len;
> > +
> > + len = recv_fifo->num >= rq->dma_burst_size ? rq->dma_burst_size :
> > + recv_fifo->num;
> > + rxd = pop_buf(recv_fifo, len, &num);
> >
> > memcpy(rq->dma_buf, rxd, num);
> >
> > - ret = stream_push(rq->dma, rq->dma_buf, 4);
> > - assert(ret == 4);
> > + ret = stream_push(rq->dma, rq->dma_buf, num);
> > + assert(ret == num);
> > xlnx_zynqmp_qspips_check_flush(rq);
> > }
> > }
> > @@ -1337,6 +1342,7 @@ static void xlnx_zynqmp_qspips_realize(DeviceState
> *dev, Error **errp)
> > fifo8_create(&s->rx_fifo_g, xsc->rx_fifo_size);
> > fifo8_create(&s->tx_fifo_g, xsc->tx_fifo_size);
> > fifo32_create(&s->fifo_g, 32);
> > + s->dma_buf = g_new0(uint8_t, s->dma_burst_size);
>
>
> This would need to be free'd somewhere.
> But I think you should put a reasonably small limit on the burst size that users
> can configure and then you can allocate this as an array in XlnxZynqMPQSPIPS.
>
>
>
> > }
> >
> > static void xlnx_zynqmp_qspips_init(Object *obj) @@ -1411,6 +1417,11
> > @@ static const VMStateDescription vmstate_xlnx_zynqmp_qspips = {
> > }
> > };
> >
> > +static Property xilinx_zynqmp_qspips_properties[] = {
> > + DEFINE_PROP_UINT32("dma-burst-size", XlnxZynqMPQSPIPS,
> > +dma_burst_size, 64),
>
> You need to limit this so users dont pick 4G. Perhaps 2 or 4K max.
>
> Cheers,
> Edgar
>
>
> > + DEFINE_PROP_END_OF_LIST(),
> > +};
> > +
> > static Property xilinx_qspips_properties[] = {
> > /* We had to turn this off for 2.10 as it is not compatible with migration.
> > * It can be enabled but will prevent the device to be migrated.
> > @@ -1463,6 +1474,7 @@ static void
> xlnx_zynqmp_qspips_class_init(ObjectClass *klass, void * data)
> > dc->realize = xlnx_zynqmp_qspips_realize;
> > dc->reset = xlnx_zynqmp_qspips_reset;
> > dc->vmsd = &vmstate_xlnx_zynqmp_qspips;
> > + dc->props = xilinx_zynqmp_qspips_properties;
> > xsc->reg_ops = &xlnx_zynqmp_qspips_ops;
> > xsc->rx_fifo_size = RXFF_A_Q;
> > xsc->tx_fifo_size = TXFF_A_Q;
> > diff --git a/include/hw/ssi/xilinx_spips.h
> > b/include/hw/ssi/xilinx_spips.h index d398a4e..cca1813 100644
> > --- a/include/hw/ssi/xilinx_spips.h
> > +++ b/include/hw/ssi/xilinx_spips.h
> > @@ -95,7 +95,8 @@ typedef struct {
> > XilinxQSPIPS parent_obj;
> >
> > StreamSlave *dma;
> > - uint8_t dma_buf[4];
> > + uint8_t *dma_buf;
> > + uint32_t dma_burst_size;
> > int gqspi_irqline;
> >
> > uint32_t regs[XLNX_ZYNQMP_SPIPS_R_MAX];
> > --
> > 2.7.4
> >
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [PATCH] xilinx_spips: Make dma transactions as per dma_burst_size
@ 2018-06-12 6:44 Sai Pavan Boddu
0 siblings, 0 replies; 4+ messages in thread
From: Sai Pavan Boddu @ 2018-06-12 6:44 UTC (permalink / raw)
To: qemu-devel
Cc: Alistair Francis, Peter Crosthwaite, Peter Maydell,
Francisco Iglesias, Edgar E. Iglesias, KONRAD Frederic,
Philippe Mathieu-Daudé
Qspi dma has a burst length of 64 bytes, So limit transaction length to
64 max.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
---
hw/ssi/xilinx_spips.c | 18 +++++++++++++++---
include/hw/ssi/xilinx_spips.h | 3 ++-
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index 03f5fae..ea006c4 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -851,12 +851,17 @@ static void xlnx_zynqmp_qspips_notify(void *opaque)
{
size_t ret;
uint32_t num;
- const void *rxd = pop_buf(recv_fifo, 4, &num);
+ const void *rxd;
+ int len;
+
+ len = recv_fifo->num >= rq->dma_burst_size ? rq->dma_burst_size :
+ recv_fifo->num;
+ rxd = pop_buf(recv_fifo, len, &num);
memcpy(rq->dma_buf, rxd, num);
- ret = stream_push(rq->dma, rq->dma_buf, 4);
- assert(ret == 4);
+ ret = stream_push(rq->dma, rq->dma_buf, num);
+ assert(ret == num);
xlnx_zynqmp_qspips_check_flush(rq);
}
}
@@ -1337,6 +1342,7 @@ static void xlnx_zynqmp_qspips_realize(DeviceState *dev, Error **errp)
fifo8_create(&s->rx_fifo_g, xsc->rx_fifo_size);
fifo8_create(&s->tx_fifo_g, xsc->tx_fifo_size);
fifo32_create(&s->fifo_g, 32);
+ s->dma_buf = g_new0(uint8_t, s->dma_burst_size);
}
static void xlnx_zynqmp_qspips_init(Object *obj)
@@ -1411,6 +1417,11 @@ static const VMStateDescription vmstate_xlnx_zynqmp_qspips = {
}
};
+static Property xilinx_zynqmp_qspips_properties[] = {
+ DEFINE_PROP_UINT32("dma-burst-size", XlnxZynqMPQSPIPS, dma_burst_size, 64),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
static Property xilinx_qspips_properties[] = {
/* We had to turn this off for 2.10 as it is not compatible with migration.
* It can be enabled but will prevent the device to be migrated.
@@ -1463,6 +1474,7 @@ static void xlnx_zynqmp_qspips_class_init(ObjectClass *klass, void * data)
dc->realize = xlnx_zynqmp_qspips_realize;
dc->reset = xlnx_zynqmp_qspips_reset;
dc->vmsd = &vmstate_xlnx_zynqmp_qspips;
+ dc->props = xilinx_zynqmp_qspips_properties;
xsc->reg_ops = &xlnx_zynqmp_qspips_ops;
xsc->rx_fifo_size = RXFF_A_Q;
xsc->tx_fifo_size = TXFF_A_Q;
diff --git a/include/hw/ssi/xilinx_spips.h b/include/hw/ssi/xilinx_spips.h
index d398a4e..cca1813 100644
--- a/include/hw/ssi/xilinx_spips.h
+++ b/include/hw/ssi/xilinx_spips.h
@@ -95,7 +95,8 @@ typedef struct {
XilinxQSPIPS parent_obj;
StreamSlave *dma;
- uint8_t dma_buf[4];
+ uint8_t *dma_buf;
+ uint32_t dma_burst_size;
int gqspi_irqline;
uint32_t regs[XLNX_ZYNQMP_SPIPS_R_MAX];
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-06-19 20:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-14 5:27 [Qemu-devel] [PATCH] xilinx_spips: Make dma transactions as per dma_burst_size Sai Pavan Boddu
2018-06-14 11:25 ` Edgar E. Iglesias
2018-06-19 20:26 ` Sai Pavan Boddu
-- strict thread matches above, loose matches on Subject: below --
2018-06-12 6:44 Sai Pavan Boddu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.