From: Keerthy <j-keerthy@ti.com> To: <t-kristo@ti.com>, <sboyd@kernel.org>, <tony@atomide.com> Cc: <linux-omap@vger.kernel.org>, <linux-clk@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <mturquette@baylibre.com>, <d-gerlach@ti.com>, <j-keerthy@ti.com>, Russ Dill <Russ.Dill@ti.com> Subject: [PATCH 3/4] clk: ti: Add functions to save/restore clk context Date: Tue, 19 Jun 2018 09:58:24 +0530 [thread overview] Message-ID: <1529382505-3069-4-git-send-email-j-keerthy@ti.com> (raw) In-Reply-To: <1529382505-3069-1-git-send-email-j-keerthy@ti.com> From: Russ Dill <Russ.Dill@ti.com> SoCs like AM43XX lose clock registers context during RTC-only suspend. Hence add functions to save/restore the clock registers context. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Russ Dill <Russ.Dill@ti.com> --- drivers/clk/ti/clock.h | 2 + drivers/clk/ti/divider.c | 36 ++++++++++++++ drivers/clk/ti/dpll.c | 6 +++ drivers/clk/ti/dpll3xxx.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/ti/gate.c | 3 ++ drivers/clk/ti/mux.c | 29 +++++++++++ include/linux/clk/ti.h | 6 +++ 7 files changed, 206 insertions(+) diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h index b582780..26fbdf2 100644 --- a/drivers/clk/ti/clock.h +++ b/drivers/clk/ti/clock.h @@ -24,6 +24,7 @@ struct clk_omap_divider { u8 flags; s8 latch; const struct clk_div_table *table; + u32 context; }; #define to_clk_omap_divider(_hw) container_of(_hw, struct clk_omap_divider, hw) @@ -36,6 +37,7 @@ struct clk_omap_mux { u8 shift; s8 latch; u8 flags; + u8 saved_parent; }; #define to_clk_omap_mux(_hw) container_of(_hw, struct clk_omap_mux, hw) diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c index aaa277d..4418e0d 100644 --- a/drivers/clk/ti/divider.c +++ b/drivers/clk/ti/divider.c @@ -268,10 +268,46 @@ static int ti_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, return 0; } +/** + * clk_divider_save_context - Save the divider value + * @hw: pointer struct clk_hw + * + * Save the divider value + */ +static int clk_divider_save_context(struct clk_hw *hw) +{ + struct clk_omap_divider *divider = to_clk_omap_divider(hw); + u32 val; + + val = ti_clk_ll_ops->clk_readl(÷r->reg) >> divider->shift; + divider->context = val & div_mask(divider); + + return 0; +} + +/** + * clk_divider_restore_context - restore the saved the divider value + * @hw: pointer struct clk_hw + * + * Restore the saved the divider value + */ +static void clk_divider_restore_context(struct clk_hw *hw) +{ + struct clk_omap_divider *divider = to_clk_omap_divider(hw); + u32 val; + + val = ti_clk_ll_ops->clk_readl(÷r->reg); + val &= ~(div_mask(divider) << divider->shift); + val |= divider->context << divider->shift; + ti_clk_ll_ops->clk_writel(val, ÷r->reg); +} + const struct clk_ops ti_clk_divider_ops = { .recalc_rate = ti_clk_divider_recalc_rate, .round_rate = ti_clk_divider_round_rate, .set_rate = ti_clk_divider_set_rate, + .save_context = clk_divider_save_context, + .restore_context = clk_divider_restore_context, }; static struct clk *_register_divider(struct device *dev, const char *name, diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 7d33ca9..b1c4d8a 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -39,6 +39,8 @@ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, .determine_rate = &omap4_dpll_regm4xen_determine_rate, .get_parent = &omap2_init_dpll_parent, + .save_context = &omap3_core_dpll_save_context, + .restore_context = &omap3_core_dpll_restore_context, }; #else static const struct clk_ops dpll_m4xen_ck_ops = {}; @@ -62,6 +64,8 @@ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, .determine_rate = &omap3_noncore_dpll_determine_rate, .get_parent = &omap2_init_dpll_parent, + .save_context = &omap3_noncore_dpll_save_context, + .restore_context = &omap3_noncore_dpll_restore_context, }; static const struct clk_ops dpll_no_gate_ck_ops = { @@ -72,6 +76,8 @@ .set_parent = &omap3_noncore_dpll_set_parent, .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, .determine_rate = &omap3_noncore_dpll_determine_rate, + .save_context = &omap3_noncore_dpll_save_context, + .restore_context = &omap3_noncore_dpll_restore_context }; #else static const struct clk_ops dpll_core_ck_ops = {}; diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c index 4534de2..44b6b64 100644 --- a/drivers/clk/ti/dpll3xxx.c +++ b/drivers/clk/ti/dpll3xxx.c @@ -782,6 +782,130 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, return rate; } +/** + * omap3_core_dpll_save_context - Save the m and n values of the divider + * @hw: pointer struct clk_hw + * + * Before the dpll registers are lost save the last rounded rate m and n + * and the enable mask. + */ +int omap3_core_dpll_save_context(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + u32 v; + + dd = clk->dpll_data; + + v = ti_clk_ll_ops->clk_readl(&dd->control_reg); + clk->context = (v & dd->enable_mask) >> __ffs(dd->enable_mask); + + if (clk->context == DPLL_LOCKED) { + v = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg); + dd->last_rounded_m = (v & dd->mult_mask) >> + __ffs(dd->mult_mask); + dd->last_rounded_n = ((v & dd->div1_mask) >> + __ffs(dd->div1_mask)) + 1; + } + + return 0; +} + +/** + * omap3_core_dpll_restore_context - restore the m and n values of the divider + * @hw: pointer struct clk_hw + * + * Restore the last rounded rate m and n + * and the enable mask. + */ +void omap3_core_dpll_restore_context(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + const struct dpll_data *dd; + u32 v; + + dd = clk->dpll_data; + + if (clk->context == DPLL_LOCKED) { + _omap3_dpll_write_clken(clk, 0x4); + _omap3_wait_dpll_status(clk, 0); + + v = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg); + v &= ~(dd->mult_mask | dd->div1_mask); + v |= dd->last_rounded_m << __ffs(dd->mult_mask); + v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask); + ti_clk_ll_ops->clk_writel(v, &dd->mult_div1_reg); + + _omap3_dpll_write_clken(clk, DPLL_LOCKED); + _omap3_wait_dpll_status(clk, 1); + } else { + _omap3_dpll_write_clken(clk, clk->context); + } +} + +/** + * omap3_non_core_dpll_save_context - Save the m and n values of the divider + * @hw: pointer struct clk_hw + * + * Before the dpll registers are lost save the last rounded rate m and n + * and the enable mask. + */ +int omap3_noncore_dpll_save_context(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + u32 v; + + dd = clk->dpll_data; + + v = ti_clk_ll_ops->clk_readl(&dd->control_reg); + clk->context = (v & dd->enable_mask) >> __ffs(dd->enable_mask); + + if (clk->context == DPLL_LOCKED) { + v = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg); + dd->last_rounded_m = (v & dd->mult_mask) >> + __ffs(dd->mult_mask); + dd->last_rounded_n = ((v & dd->div1_mask) >> + __ffs(dd->div1_mask)) + 1; + } + + return 0; +} + +/** + * omap3_core_dpll_restore_context - restore the m and n values of the divider + * @hw: pointer struct clk_hw + * + * Restore the last rounded rate m and n + * and the enable mask. + */ +void omap3_noncore_dpll_restore_context(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + const struct dpll_data *dd; + u32 ctrl, mult_div1; + + dd = clk->dpll_data; + + ctrl = ti_clk_ll_ops->clk_readl(&dd->control_reg); + mult_div1 = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg); + + if (clk->context == ((ctrl & dd->enable_mask) >> + __ffs(dd->enable_mask)) && + dd->last_rounded_m == ((mult_div1 & dd->mult_mask) >> + __ffs(dd->mult_mask)) && + dd->last_rounded_n == ((mult_div1 & dd->div1_mask) >> + __ffs(dd->div1_mask)) + 1) { + /* nothing to be done */ + return; + } + + if (clk->context == DPLL_LOCKED) + omap3_noncore_dpll_program(clk, 0); + else + _omap3_dpll_write_clken(clk, clk->context); +} + /* OMAP3/4 non-CORE DPLL clkops */ const struct clk_hw_omap_ops clkhwops_omap3_dpll = { .allow_idle = omap3_dpll_allow_idle, diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c index 935b2de..2453b36 100644 --- a/drivers/clk/ti/gate.c +++ b/drivers/clk/ti/gate.c @@ -33,6 +33,7 @@ .init = &omap2_init_clk_clkdm, .enable = &omap2_clkops_enable_clkdm, .disable = &omap2_clkops_disable_clkdm, + .restore_context = clk_dflt_restore_context, }; const struct clk_ops omap_gate_clk_ops = { @@ -40,6 +41,7 @@ .enable = &omap2_dflt_clk_enable, .disable = &omap2_dflt_clk_disable, .is_enabled = &omap2_dflt_clk_is_enabled, + .restore_context = clk_dflt_restore_context, }; static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = { @@ -47,6 +49,7 @@ .enable = &omap36xx_gate_clk_enable_with_hsdiv_restore, .disable = &omap2_dflt_clk_disable, .is_enabled = &omap2_dflt_clk_is_enabled, + .restore_context = clk_dflt_restore_context, }; /** diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c index 69a4308..5749b2b 100644 --- a/drivers/clk/ti/mux.c +++ b/drivers/clk/ti/mux.c @@ -91,10 +91,39 @@ static int ti_clk_mux_set_parent(struct clk_hw *hw, u8 index) return 0; } +/** + * clk_mux_save_context - Save the parent selcted in the mux + * @hw: pointer struct clk_hw + * + * Save the parent mux value. + */ +static int clk_mux_save_context(struct clk_hw *hw) +{ + struct clk_omap_mux *mux = to_clk_omap_mux(hw); + + mux->saved_parent = ti_clk_mux_get_parent(hw); + return 0; +} + +/** + * clk_mux_restore_context - Restore the parent in the mux + * @hw: pointer struct clk_hw + * + * Restore the saved parent mux value. + */ +static void clk_mux_restore_context(struct clk_hw *hw) +{ + struct clk_omap_mux *mux = to_clk_omap_mux(hw); + + ti_clk_mux_set_parent(hw, mux->saved_parent); +} + const struct clk_ops ti_clk_mux_ops = { .get_parent = ti_clk_mux_get_parent, .set_parent = ti_clk_mux_set_parent, .determine_rate = __clk_mux_determine_rate, + .save_context = clk_mux_save_context, + .restore_context = clk_mux_restore_context, }; static struct clk *_register_mux(struct device *dev, const char *name, diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index a8faa38..c1b13bb 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -159,6 +159,7 @@ struct clk_hw_omap { const char *clkdm_name; struct clockdomain *clkdm; const struct clk_hw_omap_ops *ops; + u32 context; }; /* @@ -293,6 +294,11 @@ struct ti_clk_features { void ti_clk_setup_features(struct ti_clk_features *features); const struct ti_clk_features *ti_clk_get_features(void); +int omap3_noncore_dpll_save_context(struct clk_hw *hw); +void omap3_noncore_dpll_restore_context(struct clk_hw *hw); + +int omap3_core_dpll_save_context(struct clk_hw *hw); +void omap3_core_dpll_restore_context(struct clk_hw *hw); extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com> To: t-kristo@ti.com, sboyd@kernel.org, tony@atomide.com Cc: linux-omap@vger.kernel.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, mturquette@baylibre.com, d-gerlach@ti.com, j-keerthy@ti.com, Russ Dill <Russ.Dill@ti.com> Subject: [PATCH 3/4] clk: ti: Add functions to save/restore clk context Date: Tue, 19 Jun 2018 09:58:24 +0530 [thread overview] Message-ID: <1529382505-3069-4-git-send-email-j-keerthy@ti.com> (raw) In-Reply-To: <1529382505-3069-1-git-send-email-j-keerthy@ti.com> From: Russ Dill <Russ.Dill@ti.com> SoCs like AM43XX lose clock registers context during RTC-only suspend. Hence add functions to save/restore the clock registers context. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Russ Dill <Russ.Dill@ti.com> --- drivers/clk/ti/clock.h | 2 + drivers/clk/ti/divider.c | 36 ++++++++++++++ drivers/clk/ti/dpll.c | 6 +++ drivers/clk/ti/dpll3xxx.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/ti/gate.c | 3 ++ drivers/clk/ti/mux.c | 29 +++++++++++ include/linux/clk/ti.h | 6 +++ 7 files changed, 206 insertions(+) diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h index b582780..26fbdf2 100644 --- a/drivers/clk/ti/clock.h +++ b/drivers/clk/ti/clock.h @@ -24,6 +24,7 @@ struct clk_omap_divider { u8 flags; s8 latch; const struct clk_div_table *table; + u32 context; }; #define to_clk_omap_divider(_hw) container_of(_hw, struct clk_omap_divider, hw) @@ -36,6 +37,7 @@ struct clk_omap_mux { u8 shift; s8 latch; u8 flags; + u8 saved_parent; }; #define to_clk_omap_mux(_hw) container_of(_hw, struct clk_omap_mux, hw) diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c index aaa277d..4418e0d 100644 --- a/drivers/clk/ti/divider.c +++ b/drivers/clk/ti/divider.c @@ -268,10 +268,46 @@ static int ti_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, return 0; } +/** + * clk_divider_save_context - Save the divider value + * @hw: pointer struct clk_hw + * + * Save the divider value + */ +static int clk_divider_save_context(struct clk_hw *hw) +{ + struct clk_omap_divider *divider = to_clk_omap_divider(hw); + u32 val; + + val = ti_clk_ll_ops->clk_readl(÷r->reg) >> divider->shift; + divider->context = val & div_mask(divider); + + return 0; +} + +/** + * clk_divider_restore_context - restore the saved the divider value + * @hw: pointer struct clk_hw + * + * Restore the saved the divider value + */ +static void clk_divider_restore_context(struct clk_hw *hw) +{ + struct clk_omap_divider *divider = to_clk_omap_divider(hw); + u32 val; + + val = ti_clk_ll_ops->clk_readl(÷r->reg); + val &= ~(div_mask(divider) << divider->shift); + val |= divider->context << divider->shift; + ti_clk_ll_ops->clk_writel(val, ÷r->reg); +} + const struct clk_ops ti_clk_divider_ops = { .recalc_rate = ti_clk_divider_recalc_rate, .round_rate = ti_clk_divider_round_rate, .set_rate = ti_clk_divider_set_rate, + .save_context = clk_divider_save_context, + .restore_context = clk_divider_restore_context, }; static struct clk *_register_divider(struct device *dev, const char *name, diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 7d33ca9..b1c4d8a 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -39,6 +39,8 @@ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, .determine_rate = &omap4_dpll_regm4xen_determine_rate, .get_parent = &omap2_init_dpll_parent, + .save_context = &omap3_core_dpll_save_context, + .restore_context = &omap3_core_dpll_restore_context, }; #else static const struct clk_ops dpll_m4xen_ck_ops = {}; @@ -62,6 +64,8 @@ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, .determine_rate = &omap3_noncore_dpll_determine_rate, .get_parent = &omap2_init_dpll_parent, + .save_context = &omap3_noncore_dpll_save_context, + .restore_context = &omap3_noncore_dpll_restore_context, }; static const struct clk_ops dpll_no_gate_ck_ops = { @@ -72,6 +76,8 @@ .set_parent = &omap3_noncore_dpll_set_parent, .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, .determine_rate = &omap3_noncore_dpll_determine_rate, + .save_context = &omap3_noncore_dpll_save_context, + .restore_context = &omap3_noncore_dpll_restore_context }; #else static const struct clk_ops dpll_core_ck_ops = {}; diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c index 4534de2..44b6b64 100644 --- a/drivers/clk/ti/dpll3xxx.c +++ b/drivers/clk/ti/dpll3xxx.c @@ -782,6 +782,130 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, return rate; } +/** + * omap3_core_dpll_save_context - Save the m and n values of the divider + * @hw: pointer struct clk_hw + * + * Before the dpll registers are lost save the last rounded rate m and n + * and the enable mask. + */ +int omap3_core_dpll_save_context(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + u32 v; + + dd = clk->dpll_data; + + v = ti_clk_ll_ops->clk_readl(&dd->control_reg); + clk->context = (v & dd->enable_mask) >> __ffs(dd->enable_mask); + + if (clk->context == DPLL_LOCKED) { + v = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg); + dd->last_rounded_m = (v & dd->mult_mask) >> + __ffs(dd->mult_mask); + dd->last_rounded_n = ((v & dd->div1_mask) >> + __ffs(dd->div1_mask)) + 1; + } + + return 0; +} + +/** + * omap3_core_dpll_restore_context - restore the m and n values of the divider + * @hw: pointer struct clk_hw + * + * Restore the last rounded rate m and n + * and the enable mask. + */ +void omap3_core_dpll_restore_context(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + const struct dpll_data *dd; + u32 v; + + dd = clk->dpll_data; + + if (clk->context == DPLL_LOCKED) { + _omap3_dpll_write_clken(clk, 0x4); + _omap3_wait_dpll_status(clk, 0); + + v = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg); + v &= ~(dd->mult_mask | dd->div1_mask); + v |= dd->last_rounded_m << __ffs(dd->mult_mask); + v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask); + ti_clk_ll_ops->clk_writel(v, &dd->mult_div1_reg); + + _omap3_dpll_write_clken(clk, DPLL_LOCKED); + _omap3_wait_dpll_status(clk, 1); + } else { + _omap3_dpll_write_clken(clk, clk->context); + } +} + +/** + * omap3_non_core_dpll_save_context - Save the m and n values of the divider + * @hw: pointer struct clk_hw + * + * Before the dpll registers are lost save the last rounded rate m and n + * and the enable mask. + */ +int omap3_noncore_dpll_save_context(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + u32 v; + + dd = clk->dpll_data; + + v = ti_clk_ll_ops->clk_readl(&dd->control_reg); + clk->context = (v & dd->enable_mask) >> __ffs(dd->enable_mask); + + if (clk->context == DPLL_LOCKED) { + v = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg); + dd->last_rounded_m = (v & dd->mult_mask) >> + __ffs(dd->mult_mask); + dd->last_rounded_n = ((v & dd->div1_mask) >> + __ffs(dd->div1_mask)) + 1; + } + + return 0; +} + +/** + * omap3_core_dpll_restore_context - restore the m and n values of the divider + * @hw: pointer struct clk_hw + * + * Restore the last rounded rate m and n + * and the enable mask. + */ +void omap3_noncore_dpll_restore_context(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + const struct dpll_data *dd; + u32 ctrl, mult_div1; + + dd = clk->dpll_data; + + ctrl = ti_clk_ll_ops->clk_readl(&dd->control_reg); + mult_div1 = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg); + + if (clk->context == ((ctrl & dd->enable_mask) >> + __ffs(dd->enable_mask)) && + dd->last_rounded_m == ((mult_div1 & dd->mult_mask) >> + __ffs(dd->mult_mask)) && + dd->last_rounded_n == ((mult_div1 & dd->div1_mask) >> + __ffs(dd->div1_mask)) + 1) { + /* nothing to be done */ + return; + } + + if (clk->context == DPLL_LOCKED) + omap3_noncore_dpll_program(clk, 0); + else + _omap3_dpll_write_clken(clk, clk->context); +} + /* OMAP3/4 non-CORE DPLL clkops */ const struct clk_hw_omap_ops clkhwops_omap3_dpll = { .allow_idle = omap3_dpll_allow_idle, diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c index 935b2de..2453b36 100644 --- a/drivers/clk/ti/gate.c +++ b/drivers/clk/ti/gate.c @@ -33,6 +33,7 @@ .init = &omap2_init_clk_clkdm, .enable = &omap2_clkops_enable_clkdm, .disable = &omap2_clkops_disable_clkdm, + .restore_context = clk_dflt_restore_context, }; const struct clk_ops omap_gate_clk_ops = { @@ -40,6 +41,7 @@ .enable = &omap2_dflt_clk_enable, .disable = &omap2_dflt_clk_disable, .is_enabled = &omap2_dflt_clk_is_enabled, + .restore_context = clk_dflt_restore_context, }; static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = { @@ -47,6 +49,7 @@ .enable = &omap36xx_gate_clk_enable_with_hsdiv_restore, .disable = &omap2_dflt_clk_disable, .is_enabled = &omap2_dflt_clk_is_enabled, + .restore_context = clk_dflt_restore_context, }; /** diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c index 69a4308..5749b2b 100644 --- a/drivers/clk/ti/mux.c +++ b/drivers/clk/ti/mux.c @@ -91,10 +91,39 @@ static int ti_clk_mux_set_parent(struct clk_hw *hw, u8 index) return 0; } +/** + * clk_mux_save_context - Save the parent selcted in the mux + * @hw: pointer struct clk_hw + * + * Save the parent mux value. + */ +static int clk_mux_save_context(struct clk_hw *hw) +{ + struct clk_omap_mux *mux = to_clk_omap_mux(hw); + + mux->saved_parent = ti_clk_mux_get_parent(hw); + return 0; +} + +/** + * clk_mux_restore_context - Restore the parent in the mux + * @hw: pointer struct clk_hw + * + * Restore the saved parent mux value. + */ +static void clk_mux_restore_context(struct clk_hw *hw) +{ + struct clk_omap_mux *mux = to_clk_omap_mux(hw); + + ti_clk_mux_set_parent(hw, mux->saved_parent); +} + const struct clk_ops ti_clk_mux_ops = { .get_parent = ti_clk_mux_get_parent, .set_parent = ti_clk_mux_set_parent, .determine_rate = __clk_mux_determine_rate, + .save_context = clk_mux_save_context, + .restore_context = clk_mux_restore_context, }; static struct clk *_register_mux(struct device *dev, const char *name, diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index a8faa38..c1b13bb 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -159,6 +159,7 @@ struct clk_hw_omap { const char *clkdm_name; struct clockdomain *clkdm; const struct clk_hw_omap_ops *ops; + u32 context; }; /* @@ -293,6 +294,11 @@ struct ti_clk_features { void ti_clk_setup_features(struct ti_clk_features *features); const struct ti_clk_features *ti_clk_get_features(void); +int omap3_noncore_dpll_save_context(struct clk_hw *hw); +void omap3_noncore_dpll_restore_context(struct clk_hw *hw); + +int omap3_core_dpll_save_context(struct clk_hw *hw); +void omap3_core_dpll_restore_context(struct clk_hw *hw); extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; -- 1.9.1
next prev parent reply other threads:[~2018-06-19 4:29 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-06-19 4:28 [PATCH 0/4] clk: clk: Add functions to save/restore clock context en-masse Keerthy 2018-06-19 4:28 ` Keerthy 2018-06-19 4:28 ` [PATCH 1/4] " Keerthy 2018-06-19 4:28 ` Keerthy 2018-06-19 4:28 ` [PATCH 2/4] clk: clk: Add clk_dflt_restore Keerthy 2018-06-19 4:28 ` Keerthy 2018-06-19 6:06 ` Tero Kristo 2018-06-19 6:06 ` Tero Kristo 2018-06-19 11:13 ` J, KEERTHY 2018-06-19 11:13 ` J, KEERTHY 2018-06-19 4:28 ` Keerthy [this message] 2018-06-19 4:28 ` [PATCH 3/4] clk: ti: Add functions to save/restore clk context Keerthy 2018-06-19 4:28 ` [PATCH 4/4] soc: ti: pm33xx: Save/restore clk context based on enable_off_mode setting Keerthy 2018-06-19 4:28 ` Keerthy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1529382505-3069-4-git-send-email-j-keerthy@ti.com \ --to=j-keerthy@ti.com \ --cc=Russ.Dill@ti.com \ --cc=d-gerlach@ti.com \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=sboyd@kernel.org \ --cc=t-kristo@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.