All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
	Zhengjun Xing <zhengjun.xing@linux.intel.com>,
	stable@vger.kernel.org,
	Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 2/5] xhci: Fix kernel oops in trace_xhci_free_virt_device
Date: Thu, 21 Jun 2018 16:19:42 +0300	[thread overview]
Message-ID: <1529587185-2776-3-git-send-email-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <1529587185-2776-1-git-send-email-mathias.nyman@linux.intel.com>

From: Zhengjun Xing <zhengjun.xing@linux.intel.com>

commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel
panic in trace_xhci_free_virt_device. This patch reimplement the trace
function trace_xhci_free_virt_device, remove dev->udev dereference and
added more useful parameters to show in the trace function,it also makes
sure dev->udev is not NULL before calling trace_xhci_free_virt_device.
This issue happened when xhci-hcd trace is enabled and USB devices hot
plug test. Original use-after-free patch went to stable so this needs so
be applied there as well.

[ 1092.022457] usb 2-4: USB disconnect, device number 6
[ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 1092.101694] PGD 0 P4D 0
[ 1092.104601] Oops: 0000 [#1] SMP
[ 1092.207734] Workqueue: usb_hub_wq hub_event
[ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0
[ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086
[ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01
[ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28
[ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70
[ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000
[ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60
[ 1092.266572] FS:  0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000
[ 1092.275757] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0
[ 1092.290384] Call Trace:
[ 1092.293156]  <IRQ>
[ 1092.295439]  xhci_free_virt_device.part.34+0x182/0x1a0
[ 1092.301288]  handle_cmd_completion+0x7ac/0xfa0
[ 1092.306336]  ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0
[ 1092.312661]  xhci_irq+0x3e8/0x1f60
[ 1092.316524]  __handle_irq_event_percpu+0x75/0x180
[ 1092.321876]  handle_irq_event_percpu+0x20/0x50
[ 1092.326922]  handle_irq_event+0x36/0x60
[ 1092.331273]  handle_edge_irq+0x6d/0x180
[ 1092.335644]  handle_irq+0x16/0x20
[ 1092.339417]  do_IRQ+0x41/0xc0
[ 1092.342782]  common_interrupt+0xf/0xf
[ 1092.346955]  </IRQ>

Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-mem.c   |  4 ++--
 drivers/usb/host/xhci-trace.h | 36 +++++++++++++++++++++++++++++++-----
 2 files changed, 33 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index acbd3d7..8a62eee 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -886,12 +886,12 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 
 	dev = xhci->devs[slot_id];
 
-	trace_xhci_free_virt_device(dev);
-
 	xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
 	if (!dev)
 		return;
 
+	trace_xhci_free_virt_device(dev);
+
 	if (dev->tt_info)
 		old_active_eps = dev->tt_info->active_eps;
 
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
index 410544f..88b4274 100644
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -171,6 +171,37 @@ DEFINE_EVENT(xhci_log_trb, xhci_dbc_gadget_ep_queue,
 	TP_ARGS(ring, trb)
 );
 
+DECLARE_EVENT_CLASS(xhci_log_free_virt_dev,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev),
+	TP_STRUCT__entry(
+		__field(void *, vdev)
+		__field(unsigned long long, out_ctx)
+		__field(unsigned long long, in_ctx)
+		__field(u8, fake_port)
+		__field(u8, real_port)
+		__field(u16, current_mel)
+
+	),
+	TP_fast_assign(
+		__entry->vdev = vdev;
+		__entry->in_ctx = (unsigned long long) vdev->in_ctx->dma;
+		__entry->out_ctx = (unsigned long long) vdev->out_ctx->dma;
+		__entry->fake_port = (u8) vdev->fake_port;
+		__entry->real_port = (u8) vdev->real_port;
+		__entry->current_mel = (u16) vdev->current_mel;
+		),
+	TP_printk("vdev %p ctx %llx | %llx fake_port %d real_port %d current_mel %d",
+		__entry->vdev, __entry->in_ctx, __entry->out_ctx,
+		__entry->fake_port, __entry->real_port, __entry->current_mel
+	)
+);
+
+DEFINE_EVENT(xhci_log_free_virt_dev, xhci_free_virt_device,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev)
+);
+
 DECLARE_EVENT_CLASS(xhci_log_virt_dev,
 	TP_PROTO(struct xhci_virt_device *vdev),
 	TP_ARGS(vdev),
@@ -208,11 +239,6 @@ DEFINE_EVENT(xhci_log_virt_dev, xhci_alloc_virt_device,
 	TP_ARGS(vdev)
 );
 
-DEFINE_EVENT(xhci_log_virt_dev, xhci_free_virt_device,
-	TP_PROTO(struct xhci_virt_device *vdev),
-	TP_ARGS(vdev)
-);
-
 DEFINE_EVENT(xhci_log_virt_dev, xhci_setup_device,
 	TP_PROTO(struct xhci_virt_device *vdev),
 	TP_ARGS(vdev)
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: gregkh@linuxfoundation.org
Cc: linux-usb@vger.kernel.org,
	Zhengjun Xing <zhengjun.xing@linux.intel.com>,
	stable@vger.kernel.org,
	Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [2/5] xhci: Fix kernel oops in trace_xhci_free_virt_device
Date: Thu, 21 Jun 2018 16:19:42 +0300	[thread overview]
Message-ID: <1529587185-2776-3-git-send-email-mathias.nyman@linux.intel.com> (raw)

From: Zhengjun Xing <zhengjun.xing@linux.intel.com>

commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel
panic in trace_xhci_free_virt_device. This patch reimplement the trace
function trace_xhci_free_virt_device, remove dev->udev dereference and
added more useful parameters to show in the trace function,it also makes
sure dev->udev is not NULL before calling trace_xhci_free_virt_device.
This issue happened when xhci-hcd trace is enabled and USB devices hot
plug test. Original use-after-free patch went to stable so this needs so
be applied there as well.

[ 1092.022457] usb 2-4: USB disconnect, device number 6
[ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 1092.101694] PGD 0 P4D 0
[ 1092.104601] Oops: 0000 [#1] SMP
[ 1092.207734] Workqueue: usb_hub_wq hub_event
[ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0
[ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086
[ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01
[ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28
[ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70
[ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000
[ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60
[ 1092.266572] FS:  0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000
[ 1092.275757] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0
[ 1092.290384] Call Trace:
[ 1092.293156]  <IRQ>
[ 1092.295439]  xhci_free_virt_device.part.34+0x182/0x1a0
[ 1092.301288]  handle_cmd_completion+0x7ac/0xfa0
[ 1092.306336]  ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0
[ 1092.312661]  xhci_irq+0x3e8/0x1f60
[ 1092.316524]  __handle_irq_event_percpu+0x75/0x180
[ 1092.321876]  handle_irq_event_percpu+0x20/0x50
[ 1092.326922]  handle_irq_event+0x36/0x60
[ 1092.331273]  handle_edge_irq+0x6d/0x180
[ 1092.335644]  handle_irq+0x16/0x20
[ 1092.339417]  do_IRQ+0x41/0xc0
[ 1092.342782]  common_interrupt+0xf/0xf
[ 1092.346955]  </IRQ>

Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-mem.c   |  4 ++--
 drivers/usb/host/xhci-trace.h | 36 +++++++++++++++++++++++++++++++-----
 2 files changed, 33 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index acbd3d7..8a62eee 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -886,12 +886,12 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 
 	dev = xhci->devs[slot_id];
 
-	trace_xhci_free_virt_device(dev);
-
 	xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
 	if (!dev)
 		return;
 
+	trace_xhci_free_virt_device(dev);
+
 	if (dev->tt_info)
 		old_active_eps = dev->tt_info->active_eps;
 
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
index 410544f..88b4274 100644
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -171,6 +171,37 @@ DEFINE_EVENT(xhci_log_trb, xhci_dbc_gadget_ep_queue,
 	TP_ARGS(ring, trb)
 );
 
+DECLARE_EVENT_CLASS(xhci_log_free_virt_dev,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev),
+	TP_STRUCT__entry(
+		__field(void *, vdev)
+		__field(unsigned long long, out_ctx)
+		__field(unsigned long long, in_ctx)
+		__field(u8, fake_port)
+		__field(u8, real_port)
+		__field(u16, current_mel)
+
+	),
+	TP_fast_assign(
+		__entry->vdev = vdev;
+		__entry->in_ctx = (unsigned long long) vdev->in_ctx->dma;
+		__entry->out_ctx = (unsigned long long) vdev->out_ctx->dma;
+		__entry->fake_port = (u8) vdev->fake_port;
+		__entry->real_port = (u8) vdev->real_port;
+		__entry->current_mel = (u16) vdev->current_mel;
+		),
+	TP_printk("vdev %p ctx %llx | %llx fake_port %d real_port %d current_mel %d",
+		__entry->vdev, __entry->in_ctx, __entry->out_ctx,
+		__entry->fake_port, __entry->real_port, __entry->current_mel
+	)
+);
+
+DEFINE_EVENT(xhci_log_free_virt_dev, xhci_free_virt_device,
+	TP_PROTO(struct xhci_virt_device *vdev),
+	TP_ARGS(vdev)
+);
+
 DECLARE_EVENT_CLASS(xhci_log_virt_dev,
 	TP_PROTO(struct xhci_virt_device *vdev),
 	TP_ARGS(vdev),
@@ -208,11 +239,6 @@ DEFINE_EVENT(xhci_log_virt_dev, xhci_alloc_virt_device,
 	TP_ARGS(vdev)
 );
 
-DEFINE_EVENT(xhci_log_virt_dev, xhci_free_virt_device,
-	TP_PROTO(struct xhci_virt_device *vdev),
-	TP_ARGS(vdev)
-);
-
 DEFINE_EVENT(xhci_log_virt_dev, xhci_setup_device,
 	TP_PROTO(struct xhci_virt_device *vdev),
 	TP_ARGS(vdev)

  parent reply	other threads:[~2018-06-21 13:17 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1529587185-2776-1-git-send-email-mathias.nyman@linux.intel.com>
2018-06-21 13:19 ` [PATCH 1/5] xhci: Fix perceived dead host due to runtime suspend race with event handler Mathias Nyman
2018-06-21 13:19   ` [1/5] " Mathias Nyman
2018-07-12  3:30   ` Kai-Heng Feng
2018-07-12  3:30     ` Kai-Heng Feng
2018-06-21 13:19 ` Mathias Nyman [this message]
2018-06-21 13:19   ` [2/5] xhci: Fix kernel oops in trace_xhci_free_virt_device Mathias Nyman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1529587185-2776-3-git-send-email-mathias.nyman@linux.intel.com \
    --to=mathias.nyman@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=zhengjun.xing@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.