All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v4 0/8] wil6210 patches
@ 2018-06-22  5:49 Maya Erez
  2018-06-22  5:49 ` [PATCH v4 1/8] wil6210: add support for Talyn-MB (Talyn ver 2.0) device Maya Erez
                   ` (7 more replies)
  0 siblings, 8 replies; 10+ messages in thread
From: Maya Erez @ 2018-06-22  5:49 UTC (permalink / raw)
  To: Kalle Valo; +Cc: Maya Erez, linux-wireless, wil6210

Changes from v3:
Fix copyright of wil_crash_dump.c

Changes from v2:
- Fix amsdu setting in BA response
- Remove crash dump collection from OTP sectionas it can cause PCIe halt

Changes from v1:
- Removal of module parameters
- Addition of debugfs entries for configuring enhanced DMA
- Fixing kbuild bot error
- Enabling AMSDU by default (based on FW support)
- Fixing L2 translation mode

The following set of patches add support for new wil6210 device (Talyn ver 2.0):
- Definition of the new device ID and memory areas
- New boot flow procedure and reset sequence
- Support new DMA interface - enhanced DMA
- Support new HW offloads, such as TSO, RX reorder and AMSDU

Gidon Studinski (3):
  wil6210: add support for enhanced DMA structures
  wil6210: initialize TX and RX enhanced DMA rings
  wil6210: add support for enhanced DMA RX data flows

Maya Erez (5):
  wil6210: add support for Talyn-MB (Talyn ver 2.0) device
  wil6210: add support for enhanced DMA TX data flows
  wil6210: add support for enhanced DMA debugfs
  wil6210: add support for Talyn-MB boot flow
  wil6210: remove crash dump collection from OTP section

 drivers/net/wireless/ath/wil6210/Makefile         |    1 +
 drivers/net/wireless/ath/wil6210/cfg80211.c       |   12 +-
 drivers/net/wireless/ath/wil6210/debugfs.c        |  490 +++++--
 drivers/net/wireless/ath/wil6210/ethtool.c        |    2 +-
 drivers/net/wireless/ath/wil6210/interrupt.c      |  225 ++-
 drivers/net/wireless/ath/wil6210/main.c           |  360 ++++-
 drivers/net/wireless/ath/wil6210/netdev.c         |   73 +-
 drivers/net/wireless/ath/wil6210/pcie_bus.c       |   59 +-
 drivers/net/wireless/ath/wil6210/pm.c             |    6 +-
 drivers/net/wireless/ath/wil6210/rx_reorder.c     |   26 +-
 drivers/net/wireless/ath/wil6210/trace.h          |   59 +
 drivers/net/wireless/ath/wil6210/txrx.c           |  649 ++++-----
 drivers/net/wireless/ath/wil6210/txrx.h           |  105 +-
 drivers/net/wireless/ath/wil6210/txrx_edma.c      | 1598 +++++++++++++++++++++
 drivers/net/wireless/ath/wil6210/txrx_edma.h      |  562 ++++++++
 drivers/net/wireless/ath/wil6210/wil6210.h        |  228 ++-
 drivers/net/wireless/ath/wil6210/wil_crash_dump.c |    5 +-
 drivers/net/wireless/ath/wil6210/wmi.c            |  502 ++++++-
 drivers/net/wireless/ath/wil6210/wmi.h            |  167 ++-
 19 files changed, 4468 insertions(+), 661 deletions(-)
 create mode 100644 drivers/net/wireless/ath/wil6210/txrx_edma.c
 create mode 100644 drivers/net/wireless/ath/wil6210/txrx_edma.h

-- 
1.9.1

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2018-07-02 14:26 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-22  5:49 [PATCH v4 0/8] wil6210 patches Maya Erez
2018-06-22  5:49 ` [PATCH v4 1/8] wil6210: add support for Talyn-MB (Talyn ver 2.0) device Maya Erez
2018-07-02 14:26   ` [v4, " Kalle Valo
2018-06-22  5:49 ` [PATCH v4 2/8] wil6210: add support for enhanced DMA structures Maya Erez
2018-06-22  5:49 ` [PATCH v4 3/8] wil6210: initialize TX and RX enhanced DMA rings Maya Erez
2018-06-22  5:49 ` [PATCH v4 4/8] wil6210: add support for enhanced DMA TX data flows Maya Erez
2018-06-22  5:49 ` [PATCH v4 5/8] wil6210: add support for enhanced DMA RX " Maya Erez
2018-06-22  5:49 ` [PATCH v4 6/8] wil6210: add support for enhanced DMA debugfs Maya Erez
2018-06-22  5:49 ` [PATCH v4 7/8] wil6210: add support for Talyn-MB boot flow Maya Erez
2018-06-22  5:49 ` [PATCH v4 8/8] wil6210: remove crash dump collection from OTP section Maya Erez

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.