[PATCH v3 0/2] regulator: add new UniPhier regulator support

[PATCH v3 0/2] regulator: add new UniPhier regulator support

[Kunihiko Hayashi]

This series add new regulator controller support for UniPhier SoCs.
Currently this supports USB3 VBUS controller only. This USB3 VBUS belongs to
USB3 glue layer.

Changes since v2:
- replace functions in regulator_ops with helper ones

Changes since v1:
- dt-bindings: add description of glue layer
- replace read/write accesses with regmap_mmio
- rewrite a header with C++ comment style
- reuse soc_data for pxs2, ld20 and pxs3
- replace clk operations with clk_bulk
- move nclks and nrsts to soc_data

Kunihiko Hayashi (2):
  dt-bindings: regulator: add DT bindings for UniPhier regulator
  regulator: uniphier: add regulator driver for UniPhier SoC

 .../bindings/regulator/uniphier-regulator.txt      |  57 ++++++
 drivers/regulator/Kconfig                          |   8 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/uniphier-regulator.c             | 213 +++++++++++++++++++++
 4 files changed, 279 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
 create mode 100644 drivers/regulator/uniphier-regulator.c

-- 
2.7.4

[PATCH v3 0/2] regulator: add new UniPhier regulator support

[Kunihiko Hayashi]

This series add new regulator controller support for UniPhier SoCs.
Currently this supports USB3 VBUS controller only. This USB3 VBUS belongs to
USB3 glue layer.

Changes since v2:
- replace functions in regulator_ops with helper ones

Changes since v1:
- dt-bindings: add description of glue layer
- replace read/write accesses with regmap_mmio
- rewrite a header with C++ comment style
- reuse soc_data for pxs2, ld20 and pxs3
- replace clk operations with clk_bulk
- move nclks and nrsts to soc_data

Kunihiko Hayashi (2):
  dt-bindings: regulator: add DT bindings for UniPhier regulator
  regulator: uniphier: add regulator driver for UniPhier SoC

 .../bindings/regulator/uniphier-regulator.txt      |  57 ++++++
 drivers/regulator/Kconfig                          |   8 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/uniphier-regulator.c             | 213 +++++++++++++++++++++
 4 files changed, 279 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
 create mode 100644 drivers/regulator/uniphier-regulator.c

-- 
2.7.4

[PATCH v3 1/2] dt-bindings: regulator: add DT bindings for UniPhier regulator

[Kunihiko Hayashi]

Add DT bindings for regulators implemented in UniPhier SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../bindings/regulator/uniphier-regulator.txt      | 57 ++++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/uniphier-regulator.txt

diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
new file mode 100644
index 0000000..c9919f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
@@ -0,0 +1,57 @@
+Socionext UniPhier Regulator Controller
+
+This describes the devicetree bindings for regulator controller implemented
+on Socionext UniPhier SoCs.
+
+USB3 Controller
+---------------
+
+This regulator controls VBUS and belongs to USB3 glue layer. Before using
+the regulator, it is necessary to control the clocks and resets to enable
+this layer. These clocks and resets should be described in each property.
+
+Required properties:
+- compatible: Should be
+    "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
+    "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
+    "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
+    "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
+- reg: Specifies offset and length of the register set for the device.
+- clocks: A list of phandles to the clock gate for USB3 glue layer.
+	According to the clock-names, appropriate clocks are required.
+- clock-names: Should contain
+    "gio", "link" - for Pro4 SoC
+    "link"        - for others
+- resets: A list of phandles to the reset control for USB3 glue layer.
+	According to the reset-names, appropriate resets are required.
+- reset-names: Should contain
+    "gio", "link" - for Pro4 SoC
+    "link"        - for others
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+Example:
+
+	usb-glue@65b00000 {
+		compatible = "socionext,uniphier-ld20-dwc3-glue",
+			     "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x65b00000 0x400>;
+
+		usb_vbus0: regulators@100 {
+			compatible = "socionext,uniphier-ld20-usb3-regulator";
+			reg = <0x100 0x10>;
+			clock-names = "link";
+			clocks = <&sys_clk 14>;
+			reset-names = "link";
+			resets = <&sys_rst 14>;
+		};
+
+		phy {
+			...
+			phy-supply = <&usb_vbus0>;
+		};
+		...
+	};
-- 
2.7.4

[PATCH v3 1/2] dt-bindings: regulator: add DT bindings for UniPhier regulator

[Kunihiko Hayashi]

Add DT bindings for regulators implemented in UniPhier SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../bindings/regulator/uniphier-regulator.txt      | 57 ++++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/uniphier-regulator.txt

diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
new file mode 100644
index 0000000..c9919f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
@@ -0,0 +1,57 @@
+Socionext UniPhier Regulator Controller
+
+This describes the devicetree bindings for regulator controller implemented
+on Socionext UniPhier SoCs.
+
+USB3 Controller
+---------------
+
+This regulator controls VBUS and belongs to USB3 glue layer. Before using
+the regulator, it is necessary to control the clocks and resets to enable
+this layer. These clocks and resets should be described in each property.
+
+Required properties:
+- compatible: Should be
+    "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
+    "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
+    "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
+    "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
+- reg: Specifies offset and length of the register set for the device.
+- clocks: A list of phandles to the clock gate for USB3 glue layer.
+	According to the clock-names, appropriate clocks are required.
+- clock-names: Should contain
+    "gio", "link" - for Pro4 SoC
+    "link"        - for others
+- resets: A list of phandles to the reset control for USB3 glue layer.
+	According to the reset-names, appropriate resets are required.
+- reset-names: Should contain
+    "gio", "link" - for Pro4 SoC
+    "link"        - for others
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+Example:
+
+	usb-glue at 65b00000 {
+		compatible = "socionext,uniphier-ld20-dwc3-glue",
+			     "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x65b00000 0x400>;
+
+		usb_vbus0: regulators at 100 {
+			compatible = "socionext,uniphier-ld20-usb3-regulator";
+			reg = <0x100 0x10>;
+			clock-names = "link";
+			clocks = <&sys_clk 14>;
+			reset-names = "link";
+			resets = <&sys_rst 14>;
+		};
+
+		phy {
+			...
+			phy-supply = <&usb_vbus0>;
+		};
+		...
+	};
-- 
2.7.4

[PATCH v3 2/2] regulator: uniphier: add regulator driver for UniPhier SoC

[Kunihiko Hayashi]

Initial commit to add support for regulators implemented in UniPhier SoCs.
This supports USB VBUS only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/regulator/Kconfig              |   8 ++
 drivers/regulator/Makefile             |   1 +
 drivers/regulator/uniphier-regulator.c | 213 +++++++++++++++++++++++++++++++++
 3 files changed, 222 insertions(+)
 create mode 100644 drivers/regulator/uniphier-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 097f617..7f7ad0d 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -932,6 +932,14 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_UNIPHIER
+	tristate "UniPhier regulator driver"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && MFD_SYSCON
+	default ARCH_UNIPHIER
+	help
+	  Support for regulators implemented on Socionext UniPhier SoCs.
+
 config REGULATOR_VCTRL
 	tristate "Voltage controlled regulators"
 	depends on OF
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 590674f..c0dd281 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -116,6 +116,7 @@ obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
 obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
+obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
 obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
 obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
new file mode 100644
index 0000000..abf22ac
--- /dev/null
+++ b/drivers/regulator/uniphier-regulator.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Regulator controller driver for UniPhier SoC
+// Copyright 2018 Socionext Inc.
+// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/reset.h>
+
+#define MAX_CLKS	2
+#define MAX_RSTS	2
+
+struct uniphier_regulator_soc_data {
+	int nclks;
+	const char * const *clock_names;
+	int nrsts;
+	const char * const *reset_names;
+	const struct regulator_desc *desc;
+	const struct regmap_config *regconf;
+};
+
+struct uniphier_regulator_priv {
+	struct clk_bulk_data clk[MAX_CLKS];
+	struct reset_control *rst[MAX_RSTS];
+	const struct uniphier_regulator_soc_data *data;
+};
+
+static struct regulator_ops uniphier_regulator_ops = {
+	.enable     = regulator_enable_regmap,
+	.disable    = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static int uniphier_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_regulator_priv *priv;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	struct resource *res;
+	void __iomem *base;
+	const char *name;
+	int i, ret, nr;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->data = of_device_get_match_data(dev);
+	if (WARN_ON(!priv->data))
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	for (i = 0; i < priv->data->nclks; i++)
+		priv->clk[i].id = priv->data->clock_names[i];
+	ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < priv->data->nrsts; i++) {
+		name = priv->data->reset_names[i];
+		priv->rst[i] = devm_reset_control_get_shared(dev, name);
+		if (IS_ERR(priv->rst[i]))
+			return PTR_ERR(priv->rst[i]);
+	}
+
+	ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (nr = 0; nr < priv->data->nrsts; nr++) {
+		ret = reset_control_deassert(priv->rst[nr]);
+		if (ret)
+			goto out_rst_assert;
+	}
+
+	regmap = devm_regmap_init_mmio(dev, base, priv->data->regconf);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	config.dev = dev;
+	config.driver_data = priv;
+	config.of_node = dev->of_node;
+	config.regmap = regmap;
+	config.init_data = of_get_regulator_init_data(dev, dev->of_node,
+						      priv->data->desc);
+	rdev = devm_regulator_register(dev, priv->data->desc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		goto out_rst_assert;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+out_rst_assert:
+	while (nr--)
+		reset_control_assert(priv->rst[nr]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return ret;
+}
+
+static int uniphier_regulator_remove(struct platform_device *pdev)
+{
+	struct uniphier_regulator_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < priv->data->nrsts; i++)
+		reset_control_assert(priv->rst[i]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return 0;
+}
+
+/* USB3 controller data */
+#define USB3VBUS_OFFSET		0x0
+#define USB3VBUS_REG		BIT(4)
+#define USB3VBUS_REG_EN		BIT(3)
+static const struct regulator_desc uniphier_usb3_regulator_desc = {
+	.name = "vbus",
+	.of_match = of_match_ptr("vbus"),
+	.ops = &uniphier_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.enable_reg  = USB3VBUS_OFFSET,
+	.enable_mask = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.enable_val  = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.disable_val = USB3VBUS_REG_EN,
+};
+
+static const struct regmap_config uniphier_usb3_regulator_regconf = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 1,
+};
+
+static const char * const uniphier_pro4_clock_reset_names[] = {
+	"gio", "link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pro4_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.clock_names = uniphier_pro4_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.reset_names = uniphier_pro4_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const char * const uniphier_pxs2_clock_reset_names[] = {
+	"link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pxs2_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.clock_names = uniphier_pxs2_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.reset_names = uniphier_pxs2_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const struct of_device_id uniphier_regulator_match[] = {
+	/* USB VBUS */
+	{
+		.compatible = "socionext,uniphier-pro4-usb3-regulator",
+		.data = &uniphier_pro4_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver uniphier_regulator_driver = {
+	.probe = uniphier_regulator_probe,
+	.remove = uniphier_regulator_remove,
+	.driver = {
+		.name  = "uniphier-regulator",
+		.of_match_table = uniphier_regulator_match,
+	},
+};
+module_platform_driver(uniphier_regulator_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier Regulator Controller Driver");
+MODULE_LICENSE("GPL");
-- 
2.7.4

[PATCH v3 2/2] regulator: uniphier: add regulator driver for UniPhier SoC

[Kunihiko Hayashi]

Initial commit to add support for regulators implemented in UniPhier SoCs.
This supports USB VBUS only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/regulator/Kconfig              |   8 ++
 drivers/regulator/Makefile             |   1 +
 drivers/regulator/uniphier-regulator.c | 213 +++++++++++++++++++++++++++++++++
 3 files changed, 222 insertions(+)
 create mode 100644 drivers/regulator/uniphier-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 097f617..7f7ad0d 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -932,6 +932,14 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_UNIPHIER
+	tristate "UniPhier regulator driver"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && MFD_SYSCON
+	default ARCH_UNIPHIER
+	help
+	  Support for regulators implemented on Socionext UniPhier SoCs.
+
 config REGULATOR_VCTRL
 	tristate "Voltage controlled regulators"
 	depends on OF
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 590674f..c0dd281 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -116,6 +116,7 @@ obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
 obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
+obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
 obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
 obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
new file mode 100644
index 0000000..abf22ac
--- /dev/null
+++ b/drivers/regulator/uniphier-regulator.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Regulator controller driver for UniPhier SoC
+// Copyright 2018 Socionext Inc.
+// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/reset.h>
+
+#define MAX_CLKS	2
+#define MAX_RSTS	2
+
+struct uniphier_regulator_soc_data {
+	int nclks;
+	const char * const *clock_names;
+	int nrsts;
+	const char * const *reset_names;
+	const struct regulator_desc *desc;
+	const struct regmap_config *regconf;
+};
+
+struct uniphier_regulator_priv {
+	struct clk_bulk_data clk[MAX_CLKS];
+	struct reset_control *rst[MAX_RSTS];
+	const struct uniphier_regulator_soc_data *data;
+};
+
+static struct regulator_ops uniphier_regulator_ops = {
+	.enable     = regulator_enable_regmap,
+	.disable    = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static int uniphier_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_regulator_priv *priv;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	struct resource *res;
+	void __iomem *base;
+	const char *name;
+	int i, ret, nr;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->data = of_device_get_match_data(dev);
+	if (WARN_ON(!priv->data))
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	for (i = 0; i < priv->data->nclks; i++)
+		priv->clk[i].id = priv->data->clock_names[i];
+	ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < priv->data->nrsts; i++) {
+		name = priv->data->reset_names[i];
+		priv->rst[i] = devm_reset_control_get_shared(dev, name);
+		if (IS_ERR(priv->rst[i]))
+			return PTR_ERR(priv->rst[i]);
+	}
+
+	ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (nr = 0; nr < priv->data->nrsts; nr++) {
+		ret = reset_control_deassert(priv->rst[nr]);
+		if (ret)
+			goto out_rst_assert;
+	}
+
+	regmap = devm_regmap_init_mmio(dev, base, priv->data->regconf);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	config.dev = dev;
+	config.driver_data = priv;
+	config.of_node = dev->of_node;
+	config.regmap = regmap;
+	config.init_data = of_get_regulator_init_data(dev, dev->of_node,
+						      priv->data->desc);
+	rdev = devm_regulator_register(dev, priv->data->desc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		goto out_rst_assert;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+out_rst_assert:
+	while (nr--)
+		reset_control_assert(priv->rst[nr]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return ret;
+}
+
+static int uniphier_regulator_remove(struct platform_device *pdev)
+{
+	struct uniphier_regulator_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < priv->data->nrsts; i++)
+		reset_control_assert(priv->rst[i]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return 0;
+}
+
+/* USB3 controller data */
+#define USB3VBUS_OFFSET		0x0
+#define USB3VBUS_REG		BIT(4)
+#define USB3VBUS_REG_EN		BIT(3)
+static const struct regulator_desc uniphier_usb3_regulator_desc = {
+	.name = "vbus",
+	.of_match = of_match_ptr("vbus"),
+	.ops = &uniphier_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.enable_reg  = USB3VBUS_OFFSET,
+	.enable_mask = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.enable_val  = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.disable_val = USB3VBUS_REG_EN,
+};
+
+static const struct regmap_config uniphier_usb3_regulator_regconf = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 1,
+};
+
+static const char * const uniphier_pro4_clock_reset_names[] = {
+	"gio", "link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pro4_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.clock_names = uniphier_pro4_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.reset_names = uniphier_pro4_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const char * const uniphier_pxs2_clock_reset_names[] = {
+	"link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pxs2_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.clock_names = uniphier_pxs2_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.reset_names = uniphier_pxs2_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const struct of_device_id uniphier_regulator_match[] = {
+	/* USB VBUS */
+	{
+		.compatible = "socionext,uniphier-pro4-usb3-regulator",
+		.data = &uniphier_pro4_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver uniphier_regulator_driver = {
+	.probe = uniphier_regulator_probe,
+	.remove = uniphier_regulator_remove,
+	.driver = {
+		.name  = "uniphier-regulator",
+		.of_match_table = uniphier_regulator_match,
+	},
+};
+module_platform_driver(uniphier_regulator_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier Regulator Controller Driver");
+MODULE_LICENSE("GPL");
-- 
2.7.4

Applied "regulator: uniphier: add regulator driver for UniPhier SoC" to the regulator tree

[Mark Brown]

The patch

   regulator: uniphier: add regulator driver for UniPhier SoC

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 9df4f90954c860b9715f8fbca521781d8d5cf280 Mon Sep 17 00:00:00 2001
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Date: Wed, 11 Jul 2018 13:30:52 +0900
Subject: [PATCH] regulator: uniphier: add regulator driver for UniPhier SoC

Initial commit to add support for regulators implemented in UniPhier SoCs.
This supports USB VBUS only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig              |   8 +
 drivers/regulator/Makefile             |   1 +
 drivers/regulator/uniphier-regulator.c | 213 +++++++++++++++++++++++++
 3 files changed, 222 insertions(+)
 create mode 100644 drivers/regulator/uniphier-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 2964eaea94c0..8233dc7f0a68 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -950,6 +950,14 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_UNIPHIER
+	tristate "UniPhier regulator driver"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && MFD_SYSCON
+	default ARCH_UNIPHIER
+	help
+	  Support for regulators implemented on Socionext UniPhier SoCs.
+
 config REGULATOR_VCTRL
 	tristate "Voltage controlled regulators"
 	depends on OF
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bd818ceb7c72..b7839f41591e 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -118,6 +118,7 @@ obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
 obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
+obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
 obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
 obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
new file mode 100644
index 000000000000..abf22acbd13e
--- /dev/null
+++ b/drivers/regulator/uniphier-regulator.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Regulator controller driver for UniPhier SoC
+// Copyright 2018 Socionext Inc.
+// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/reset.h>
+
+#define MAX_CLKS	2
+#define MAX_RSTS	2
+
+struct uniphier_regulator_soc_data {
+	int nclks;
+	const char * const *clock_names;
+	int nrsts;
+	const char * const *reset_names;
+	const struct regulator_desc *desc;
+	const struct regmap_config *regconf;
+};
+
+struct uniphier_regulator_priv {
+	struct clk_bulk_data clk[MAX_CLKS];
+	struct reset_control *rst[MAX_RSTS];
+	const struct uniphier_regulator_soc_data *data;
+};
+
+static struct regulator_ops uniphier_regulator_ops = {
+	.enable     = regulator_enable_regmap,
+	.disable    = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static int uniphier_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_regulator_priv *priv;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	struct resource *res;
+	void __iomem *base;
+	const char *name;
+	int i, ret, nr;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->data = of_device_get_match_data(dev);
+	if (WARN_ON(!priv->data))
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	for (i = 0; i < priv->data->nclks; i++)
+		priv->clk[i].id = priv->data->clock_names[i];
+	ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < priv->data->nrsts; i++) {
+		name = priv->data->reset_names[i];
+		priv->rst[i] = devm_reset_control_get_shared(dev, name);
+		if (IS_ERR(priv->rst[i]))
+			return PTR_ERR(priv->rst[i]);
+	}
+
+	ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (nr = 0; nr < priv->data->nrsts; nr++) {
+		ret = reset_control_deassert(priv->rst[nr]);
+		if (ret)
+			goto out_rst_assert;
+	}
+
+	regmap = devm_regmap_init_mmio(dev, base, priv->data->regconf);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	config.dev = dev;
+	config.driver_data = priv;
+	config.of_node = dev->of_node;
+	config.regmap = regmap;
+	config.init_data = of_get_regulator_init_data(dev, dev->of_node,
+						      priv->data->desc);
+	rdev = devm_regulator_register(dev, priv->data->desc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		goto out_rst_assert;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+out_rst_assert:
+	while (nr--)
+		reset_control_assert(priv->rst[nr]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return ret;
+}
+
+static int uniphier_regulator_remove(struct platform_device *pdev)
+{
+	struct uniphier_regulator_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < priv->data->nrsts; i++)
+		reset_control_assert(priv->rst[i]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return 0;
+}
+
+/* USB3 controller data */
+#define USB3VBUS_OFFSET		0x0
+#define USB3VBUS_REG		BIT(4)
+#define USB3VBUS_REG_EN		BIT(3)
+static const struct regulator_desc uniphier_usb3_regulator_desc = {
+	.name = "vbus",
+	.of_match = of_match_ptr("vbus"),
+	.ops = &uniphier_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.enable_reg  = USB3VBUS_OFFSET,
+	.enable_mask = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.enable_val  = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.disable_val = USB3VBUS_REG_EN,
+};
+
+static const struct regmap_config uniphier_usb3_regulator_regconf = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 1,
+};
+
+static const char * const uniphier_pro4_clock_reset_names[] = {
+	"gio", "link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pro4_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.clock_names = uniphier_pro4_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.reset_names = uniphier_pro4_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const char * const uniphier_pxs2_clock_reset_names[] = {
+	"link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pxs2_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.clock_names = uniphier_pxs2_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.reset_names = uniphier_pxs2_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const struct of_device_id uniphier_regulator_match[] = {
+	/* USB VBUS */
+	{
+		.compatible = "socionext,uniphier-pro4-usb3-regulator",
+		.data = &uniphier_pro4_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver uniphier_regulator_driver = {
+	.probe = uniphier_regulator_probe,
+	.remove = uniphier_regulator_remove,
+	.driver = {
+		.name  = "uniphier-regulator",
+		.of_match_table = uniphier_regulator_match,
+	},
+};
+module_platform_driver(uniphier_regulator_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier Regulator Controller Driver");
+MODULE_LICENSE("GPL");
-- 
2.18.0.rc2

Applied "regulator: uniphier: add regulator driver for UniPhier SoC" to the regulator tree

[Mark Brown]

The patch

   regulator: uniphier: add regulator driver for UniPhier SoC

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 9df4f90954c860b9715f8fbca521781d8d5cf280 Mon Sep 17 00:00:00 2001
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Date: Wed, 11 Jul 2018 13:30:52 +0900
Subject: [PATCH] regulator: uniphier: add regulator driver for UniPhier SoC

Initial commit to add support for regulators implemented in UniPhier SoCs.
This supports USB VBUS only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig              |   8 +
 drivers/regulator/Makefile             |   1 +
 drivers/regulator/uniphier-regulator.c | 213 +++++++++++++++++++++++++
 3 files changed, 222 insertions(+)
 create mode 100644 drivers/regulator/uniphier-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 2964eaea94c0..8233dc7f0a68 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -950,6 +950,14 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_UNIPHIER
+	tristate "UniPhier regulator driver"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && MFD_SYSCON
+	default ARCH_UNIPHIER
+	help
+	  Support for regulators implemented on Socionext UniPhier SoCs.
+
 config REGULATOR_VCTRL
 	tristate "Voltage controlled regulators"
 	depends on OF
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bd818ceb7c72..b7839f41591e 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -118,6 +118,7 @@ obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
 obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
+obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
 obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
 obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
new file mode 100644
index 000000000000..abf22acbd13e
--- /dev/null
+++ b/drivers/regulator/uniphier-regulator.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Regulator controller driver for UniPhier SoC
+// Copyright 2018 Socionext Inc.
+// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/reset.h>
+
+#define MAX_CLKS	2
+#define MAX_RSTS	2
+
+struct uniphier_regulator_soc_data {
+	int nclks;
+	const char * const *clock_names;
+	int nrsts;
+	const char * const *reset_names;
+	const struct regulator_desc *desc;
+	const struct regmap_config *regconf;
+};
+
+struct uniphier_regulator_priv {
+	struct clk_bulk_data clk[MAX_CLKS];
+	struct reset_control *rst[MAX_RSTS];
+	const struct uniphier_regulator_soc_data *data;
+};
+
+static struct regulator_ops uniphier_regulator_ops = {
+	.enable     = regulator_enable_regmap,
+	.disable    = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static int uniphier_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_regulator_priv *priv;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	struct resource *res;
+	void __iomem *base;
+	const char *name;
+	int i, ret, nr;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->data = of_device_get_match_data(dev);
+	if (WARN_ON(!priv->data))
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	for (i = 0; i < priv->data->nclks; i++)
+		priv->clk[i].id = priv->data->clock_names[i];
+	ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < priv->data->nrsts; i++) {
+		name = priv->data->reset_names[i];
+		priv->rst[i] = devm_reset_control_get_shared(dev, name);
+		if (IS_ERR(priv->rst[i]))
+			return PTR_ERR(priv->rst[i]);
+	}
+
+	ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (nr = 0; nr < priv->data->nrsts; nr++) {
+		ret = reset_control_deassert(priv->rst[nr]);
+		if (ret)
+			goto out_rst_assert;
+	}
+
+	regmap = devm_regmap_init_mmio(dev, base, priv->data->regconf);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	config.dev = dev;
+	config.driver_data = priv;
+	config.of_node = dev->of_node;
+	config.regmap = regmap;
+	config.init_data = of_get_regulator_init_data(dev, dev->of_node,
+						      priv->data->desc);
+	rdev = devm_regulator_register(dev, priv->data->desc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		goto out_rst_assert;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+out_rst_assert:
+	while (nr--)
+		reset_control_assert(priv->rst[nr]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return ret;
+}
+
+static int uniphier_regulator_remove(struct platform_device *pdev)
+{
+	struct uniphier_regulator_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < priv->data->nrsts; i++)
+		reset_control_assert(priv->rst[i]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return 0;
+}
+
+/* USB3 controller data */
+#define USB3VBUS_OFFSET		0x0
+#define USB3VBUS_REG		BIT(4)
+#define USB3VBUS_REG_EN		BIT(3)
+static const struct regulator_desc uniphier_usb3_regulator_desc = {
+	.name = "vbus",
+	.of_match = of_match_ptr("vbus"),
+	.ops = &uniphier_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.enable_reg  = USB3VBUS_OFFSET,
+	.enable_mask = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.enable_val  = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.disable_val = USB3VBUS_REG_EN,
+};
+
+static const struct regmap_config uniphier_usb3_regulator_regconf = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 1,
+};
+
+static const char * const uniphier_pro4_clock_reset_names[] = {
+	"gio", "link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pro4_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.clock_names = uniphier_pro4_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.reset_names = uniphier_pro4_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const char * const uniphier_pxs2_clock_reset_names[] = {
+	"link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pxs2_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.clock_names = uniphier_pxs2_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.reset_names = uniphier_pxs2_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const struct of_device_id uniphier_regulator_match[] = {
+	/* USB VBUS */
+	{
+		.compatible = "socionext,uniphier-pro4-usb3-regulator",
+		.data = &uniphier_pro4_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver uniphier_regulator_driver = {
+	.probe = uniphier_regulator_probe,
+	.remove = uniphier_regulator_remove,
+	.driver = {
+		.name  = "uniphier-regulator",
+		.of_match_table = uniphier_regulator_match,
+	},
+};
+module_platform_driver(uniphier_regulator_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier Regulator Controller Driver");
+MODULE_LICENSE("GPL");
-- 
2.18.0.rc2

Applied "regulator: uniphier: add regulator driver for UniPhier SoC" to the regulator tree

[Mark Brown]

The patch

   regulator: uniphier: add regulator driver for UniPhier SoC

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 9df4f90954c860b9715f8fbca521781d8d5cf280 Mon Sep 17 00:00:00 2001
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Date: Wed, 11 Jul 2018 13:30:52 +0900
Subject: [PATCH] regulator: uniphier: add regulator driver for UniPhier SoC

Initial commit to add support for regulators implemented in UniPhier SoCs.
This supports USB VBUS only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig              |   8 +
 drivers/regulator/Makefile             |   1 +
 drivers/regulator/uniphier-regulator.c | 213 +++++++++++++++++++++++++
 3 files changed, 222 insertions(+)
 create mode 100644 drivers/regulator/uniphier-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 2964eaea94c0..8233dc7f0a68 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -950,6 +950,14 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_UNIPHIER
+	tristate "UniPhier regulator driver"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && MFD_SYSCON
+	default ARCH_UNIPHIER
+	help
+	  Support for regulators implemented on Socionext UniPhier SoCs.
+
 config REGULATOR_VCTRL
 	tristate "Voltage controlled regulators"
 	depends on OF
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bd818ceb7c72..b7839f41591e 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -118,6 +118,7 @@ obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
 obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
+obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
 obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
 obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
new file mode 100644
index 000000000000..abf22acbd13e
--- /dev/null
+++ b/drivers/regulator/uniphier-regulator.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Regulator controller driver for UniPhier SoC
+// Copyright 2018 Socionext Inc.
+// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/reset.h>
+
+#define MAX_CLKS	2
+#define MAX_RSTS	2
+
+struct uniphier_regulator_soc_data {
+	int nclks;
+	const char * const *clock_names;
+	int nrsts;
+	const char * const *reset_names;
+	const struct regulator_desc *desc;
+	const struct regmap_config *regconf;
+};
+
+struct uniphier_regulator_priv {
+	struct clk_bulk_data clk[MAX_CLKS];
+	struct reset_control *rst[MAX_RSTS];
+	const struct uniphier_regulator_soc_data *data;
+};
+
+static struct regulator_ops uniphier_regulator_ops = {
+	.enable     = regulator_enable_regmap,
+	.disable    = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static int uniphier_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_regulator_priv *priv;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	struct resource *res;
+	void __iomem *base;
+	const char *name;
+	int i, ret, nr;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->data = of_device_get_match_data(dev);
+	if (WARN_ON(!priv->data))
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	for (i = 0; i < priv->data->nclks; i++)
+		priv->clk[i].id = priv->data->clock_names[i];
+	ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < priv->data->nrsts; i++) {
+		name = priv->data->reset_names[i];
+		priv->rst[i] = devm_reset_control_get_shared(dev, name);
+		if (IS_ERR(priv->rst[i]))
+			return PTR_ERR(priv->rst[i]);
+	}
+
+	ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk);
+	if (ret)
+		return ret;
+
+	for (nr = 0; nr < priv->data->nrsts; nr++) {
+		ret = reset_control_deassert(priv->rst[nr]);
+		if (ret)
+			goto out_rst_assert;
+	}
+
+	regmap = devm_regmap_init_mmio(dev, base, priv->data->regconf);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	config.dev = dev;
+	config.driver_data = priv;
+	config.of_node = dev->of_node;
+	config.regmap = regmap;
+	config.init_data = of_get_regulator_init_data(dev, dev->of_node,
+						      priv->data->desc);
+	rdev = devm_regulator_register(dev, priv->data->desc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		goto out_rst_assert;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+out_rst_assert:
+	while (nr--)
+		reset_control_assert(priv->rst[nr]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return ret;
+}
+
+static int uniphier_regulator_remove(struct platform_device *pdev)
+{
+	struct uniphier_regulator_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < priv->data->nrsts; i++)
+		reset_control_assert(priv->rst[i]);
+
+	clk_bulk_disable_unprepare(priv->data->nclks, priv->clk);
+
+	return 0;
+}
+
+/* USB3 controller data */
+#define USB3VBUS_OFFSET		0x0
+#define USB3VBUS_REG		BIT(4)
+#define USB3VBUS_REG_EN		BIT(3)
+static const struct regulator_desc uniphier_usb3_regulator_desc = {
+	.name = "vbus",
+	.of_match = of_match_ptr("vbus"),
+	.ops = &uniphier_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.enable_reg  = USB3VBUS_OFFSET,
+	.enable_mask = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.enable_val  = USB3VBUS_REG_EN | USB3VBUS_REG,
+	.disable_val = USB3VBUS_REG_EN,
+};
+
+static const struct regmap_config uniphier_usb3_regulator_regconf = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 1,
+};
+
+static const char * const uniphier_pro4_clock_reset_names[] = {
+	"gio", "link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pro4_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.clock_names = uniphier_pro4_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
+	.reset_names = uniphier_pro4_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const char * const uniphier_pxs2_clock_reset_names[] = {
+	"link",
+};
+
+static const struct uniphier_regulator_soc_data uniphier_pxs2_usb3_data = {
+	.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.clock_names = uniphier_pxs2_clock_reset_names,
+	.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
+	.reset_names = uniphier_pxs2_clock_reset_names,
+	.desc = &uniphier_usb3_regulator_desc,
+	.regconf = &uniphier_usb3_regulator_regconf,
+};
+
+static const struct of_device_id uniphier_regulator_match[] = {
+	/* USB VBUS */
+	{
+		.compatible = "socionext,uniphier-pro4-usb3-regulator",
+		.data = &uniphier_pro4_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-usb3-regulator",
+		.data = &uniphier_pxs2_usb3_data,
+	},
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver uniphier_regulator_driver = {
+	.probe = uniphier_regulator_probe,
+	.remove = uniphier_regulator_remove,
+	.driver = {
+		.name  = "uniphier-regulator",
+		.of_match_table = uniphier_regulator_match,
+	},
+};
+module_platform_driver(uniphier_regulator_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier Regulator Controller Driver");
+MODULE_LICENSE("GPL");
-- 
2.18.0.rc2