All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
To: gregkh@linuxfoundation.org
Cc: neil@brown.name, driverdev-devel@linuxdriverproject.org
Subject: [PATCH v6 08/15] staging: mt7621-pci: avoid register duplication per controller using pcie_[read|write]
Date: Mon, 30 Jul 2018 16:45:02 +0200	[thread overview]
Message-ID: <1532961909-25816-9-git-send-email-sergio.paracuellos@gmail.com> (raw)
In-Reply-To: <1532961909-25816-1-git-send-email-sergio.paracuellos@gmail.com>

Use pcie_[read|write] fucntions to read and write controller registers.
Define those only by offset and pass controller offset + register offset
relative to base address to functions.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/staging/mt7621-pci/pci-mt7621.c | 70 ++++++++++++++++-----------------
 1 file changed, 34 insertions(+), 36 deletions(-)

diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index adac455..05816e3 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -74,8 +74,8 @@
 
 #define RALINK_PCI_CONFIG_ADDR		0x20
 #define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG	0x24
-#define RALINK_PCI_MEMBASE		*(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-#define RALINK_PCI_IOBASE		*(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
+#define RALINK_PCI_MEMBASE		0x28
+#define RALINK_PCI_IOBASE		0x2C
 #define RALINK_PCIE0_RST		(1<<24)
 #define RALINK_PCIE1_RST		(1<<25)
 #define RALINK_PCIE2_RST		(1<<26)
@@ -88,26 +88,12 @@
 #define RT6855_PCIE1_OFFSET		0x3000
 #define RT6855_PCIE2_OFFSET		0x4000
 
-#define RALINK_PCI0_BAR0SETUP_ADDR	*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
-#define RALINK_PCI0_IMBASEBAR0_ADDR	*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
-#define RALINK_PCI0_ID			*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
-#define RALINK_PCI0_CLASS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
-#define RALINK_PCI0_SUBID		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
-#define RALINK_PCI0_STATUS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
-
-#define RALINK_PCI1_BAR0SETUP_ADDR	*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
-#define RALINK_PCI1_IMBASEBAR0_ADDR	*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
-#define RALINK_PCI1_ID			*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
-#define RALINK_PCI1_CLASS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
-#define RALINK_PCI1_SUBID		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
-#define RALINK_PCI1_STATUS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
-
-#define RALINK_PCI2_BAR0SETUP_ADDR	*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
-#define RALINK_PCI2_IMBASEBAR0_ADDR	*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
-#define RALINK_PCI2_ID			*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
-#define RALINK_PCI2_CLASS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
-#define RALINK_PCI2_SUBID		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
-#define RALINK_PCI2_STATUS		*(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
+#define RALINK_PCI_BAR0SETUP_ADDR	0x0010
+#define RALINK_PCI_IMBASEBAR0_ADDR	0x0018
+#define RALINK_PCI_ID			0x0030
+#define RALINK_PCI_CLASS		0x0034
+#define RALINK_PCI_SUBID		0x0038
+#define RALINK_PCI_STATUS		0x0050
 
 #define RALINK_PCIEPHY_P0P1_CTL_OFFSET	(RALINK_PCI_BASE + 0x9000)
 #define RALINK_PCIEPHY_P2_CTL_OFFSET	(RALINK_PCI_BASE + 0xA000)
@@ -495,7 +481,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 	*(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7;		// set DATA
 	mdelay(1000);
 
-	if ((RALINK_PCI0_STATUS & 0x1) == 0) {
+	if ((pcie_read(pcie, RT6855_PCIE0_OFFSET + RALINK_PCI_STATUS) & 0x1) == 0) {
 		printk("PCIE0 no card, disable it(RST&CLK)\n");
 		ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
 		rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
@@ -505,7 +491,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 		RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
 	}
 
-	if ((RALINK_PCI1_STATUS & 0x1) == 0) {
+	if ((pcie_read(pcie, RT6855_PCIE1_OFFSET + RALINK_PCI_STATUS) & 0x1) == 0) {
 		printk("PCIE1 no card, disable it(RST&CLK)\n");
 		ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
 		rt_sysc_m32(RALINK_PCIE1_CLK_EN, 0, RALINK_CLKCFG1);
@@ -515,7 +501,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 		RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
 	}
 
-	if ((RALINK_PCI2_STATUS & 0x1) == 0) {
+	if ((pcie_read(pcie, RT6855_PCIE2_OFFSET + RALINK_PCI_STATUS) & 0x1) == 0) {
 		printk("PCIE2 no card, disable it(RST&CLK)\n");
 		ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
 		rt_sysc_m32(RALINK_PCIE2_CLK_EN, 0, RALINK_CLKCFG1);
@@ -570,30 +556,42 @@ pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
 	ioport_resource.end = mt7621_res_pci_io1.end;
 */
 
-	RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
-	RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
+	pcie_write(pcie, 0xffffffff, RALINK_PCI_MEMBASE);
+	pcie_write(pcie, RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
 
 	//PCIe0
 	if ((pcie_link_status & 0x1) != 0) {
-		RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
-		RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
-		RALINK_PCI0_CLASS = 0x06040001;
+		/* open 7FFF:2G; ENABLE */
+		pcie_write(pcie, 0x7FFF0001,
+			   RT6855_PCIE0_OFFSET + RALINK_PCI_BAR0SETUP_ADDR);
+		pcie_write(pcie, MEMORY_BASE,
+			   RT6855_PCIE0_OFFSET + RALINK_PCI_IMBASEBAR0_ADDR);
+		pcie_write(pcie, 0x06040001,
+			   RT6855_PCIE0_OFFSET + RALINK_PCI_CLASS);
 		printk("PCIE0 enabled\n");
 	}
 
 	//PCIe1
 	if ((pcie_link_status & 0x2) != 0) {
-		RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
-		RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE;
-		RALINK_PCI1_CLASS = 0x06040001;
+		/* open 7FFF:2G; ENABLE */
+		pcie_write(pcie, 0x7FFF0001,
+			   RT6855_PCIE1_OFFSET + RALINK_PCI_BAR0SETUP_ADDR);
+		pcie_write(pcie, MEMORY_BASE,
+			   RT6855_PCIE1_OFFSET + RALINK_PCI_IMBASEBAR0_ADDR);
+		pcie_write(pcie, 0x06040001,
+			   RT6855_PCIE1_OFFSET + RALINK_PCI_CLASS);
 		printk("PCIE1 enabled\n");
 	}
 
 	//PCIe2
 	if ((pcie_link_status & 0x4) != 0) {
-		RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
-		RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE;
-		RALINK_PCI2_CLASS = 0x06040001;
+		/* open 7FFF:2G; ENABLE */
+		pcie_write(pcie, 0x7FFF0001,
+			   RT6855_PCIE2_OFFSET + RALINK_PCI_BAR0SETUP_ADDR);
+		pcie_write(pcie, MEMORY_BASE,
+			   RT6855_PCIE2_OFFSET + RALINK_PCI_IMBASEBAR0_ADDR);
+		pcie_write(pcie, 0x06040001,
+			   RT6855_PCIE2_OFFSET + RALINK_PCI_CLASS);
 		printk("PCIE2 enabled\n");
 	}
 
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  parent reply	other threads:[~2018-07-30 14:45 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-30 14:44 [PATCH v6 00/15] staging: mt7621-pci: avoid custom pci config read and writes Sergio Paracuellos
2018-07-30 14:44 ` [PATCH v6 01/15] staging: mt7621-pci: use generic kernel pci subsystem read and write Sergio Paracuellos
2018-07-30 14:44 ` [PATCH v6 02/15] staging: mt7621-pci: remove dead code derived to not use custom reads and writes Sergio Paracuellos
2018-07-30 14:44 ` [PATCH v6 03/15] staging: mt7621-pci: add pcie_write and pcie_read helpers Sergio Paracuellos
2018-07-30 14:44 ` [PATCH v6 04/15] staging: mt7621-pci: use pcie_[read|write] in [write|read]_config Sergio Paracuellos
2018-07-30 14:44 ` [PATCH v6 05/15] staging: mt7621-pci: simplify read_config function Sergio Paracuellos
2018-07-30 14:45 ` [PATCH v6 06/15] staging: mt7621-pci: simplify write_config function Sergio Paracuellos
2018-07-30 14:45 ` [PATCH v6 07/15] staging: mt7621-pci: remove unused macros Sergio Paracuellos
2018-07-30 14:45 ` Sergio Paracuellos [this message]
2018-07-30 14:45 ` [PATCH v6 09/15] staging: mt7621-pci: review includes putting them in alphabethic order Sergio Paracuellos
2018-07-30 14:45 ` [PATCH v6 10/15] staging: mt7621-pci: use pcie_[read|write] in RALINK_PCI_PCICFG_ADDR and RALINK_PCI_PCIMSK_ADDR Sergio Paracuellos
2018-07-30 14:45 ` [PATCH v6 11/15] staging: mt7621-pci: remove RALINK_PCI_BASE from remaining definitions Sergio Paracuellos
2018-07-30 14:45 ` [PATCH v6 12/15] staging: mt7621-pci: use BIT macro in preprocessor definitions Sergio Paracuellos
2018-07-30 14:45 ` [PATCH v6 13/15] staging: mt7621-pci: rename RALINK_PCI_CONFIG_DATA_VIRTUAL_REG definition Sergio Paracuellos
2018-07-30 14:45 ` [PATCH v6 14/15] staging: mt7621-pci: remove remaining pci_legacy dependant code Sergio Paracuellos
2018-07-30 14:45 ` [PATCH v6 15/15] staging: mt7621-dts: add pcie controller port registers Sergio Paracuellos
2018-07-30 22:55 ` [PATCH v6 00/15] staging: mt7621-pci: avoid custom pci config read and writes NeilBrown
2018-07-31  4:31   ` Sergio Paracuellos
2018-07-31  5:25     ` NeilBrown
2018-07-31  5:43       ` Sergio Paracuellos
2018-07-31 10:56       ` Sergio Paracuellos
2018-07-31  4:43   ` Sergio Paracuellos

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1532961909-25816-9-git-send-email-sergio.paracuellos@gmail.com \
    --to=sergio.paracuellos@gmail.com \
    --cc=driverdev-devel@linuxdriverproject.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=neil@brown.name \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.