* [Qemu-devel] [Bug 1784900] Re: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
2018-08-01 16:39 [Qemu-devel] [Bug 1784900] [NEW] QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline Stefan Berger
@ 2018-08-01 16:40 ` Daniel Berrange
2018-08-01 17:19 ` Dr. David Alan Gilbert
` (6 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Daniel Berrange @ 2018-08-01 16:40 UTC (permalink / raw)
To: qemu-devel
** Summary changed:
- QEMU (frontend) crashes upon warm reboot with vga=775 on Linux cmdline
+ QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1784900
Title:
QEMU (frontend) crashes upon warm reboot with virtio-gpu device and
vga=775 on Linux cmdline
Status in QEMU:
New
Bug description:
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.
The VM was used remotely via virt-manager and VNC.
Bisecting the code lead to the following patch that introduced the
bug:
commit 1fccd7c5a9a722a9cbf1bc91693f4618034f01ac (HEAD, refs/bisect/bad)
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Mon Jul 2 18:24:43 2018 +0200
virtio-gpu: disable scanout when backing resource is destroyed
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-4-kraxel@redhat.com
diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
index 336dc59007..08cd567218 100644
--- a/hw/display/virtio-gpu.c
+++ b/hw/display/virtio-gpu.c
@@ -430,6 +430,16 @@ static void virtio_gpu_disable_scanout(VirtIOGPU *g, int scanout_id)
static void virtio_gpu_resource_destroy(VirtIOGPU *g,
struct virtio_gpu_simple_resource *res)
{
+ int i;
+
+ if (res->scanout_bitmask) {
+ for (i = 0; i < g->conf.max_outputs; i++) {
+ if (res->scanout_bitmask & (1 << i)) {
+ virtio_gpu_disable_scanout(g, i);
+ }
+ }
+ }
+
pixman_image_unref(res->image);
virtio_gpu_cleanup_mapping(res);
QTAILQ_REMOVE(&g->reslist, res, next);
Reported backtraces can be found here: https://paste.fedoraproject.org/paste/OUDEfCk1IY7xiy0I0PDlkw
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1784900/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* [Qemu-devel] [Bug 1784900] Re: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
2018-08-01 16:39 [Qemu-devel] [Bug 1784900] [NEW] QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline Stefan Berger
2018-08-01 16:40 ` [Qemu-devel] [Bug 1784900] " Daniel Berrange
@ 2018-08-01 17:19 ` Dr. David Alan Gilbert
2018-08-02 0:03 ` Stefan Berger
` (5 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Dr. David Alan Gilbert @ 2018-08-01 17:19 UTC (permalink / raw)
To: qemu-devel
I also hit this with gtk frontend rather than vnc althought he backtrace
looks very different.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1784900
Title:
QEMU (frontend) crashes upon warm reboot with virtio-gpu device and
vga=775 on Linux cmdline
Status in QEMU:
New
Bug description:
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.
The VM was used remotely via virt-manager and VNC.
Bisecting the code lead to the following patch that introduced the
bug:
commit 1fccd7c5a9a722a9cbf1bc91693f4618034f01ac (HEAD, refs/bisect/bad)
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Mon Jul 2 18:24:43 2018 +0200
virtio-gpu: disable scanout when backing resource is destroyed
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-4-kraxel@redhat.com
diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
index 336dc59007..08cd567218 100644
--- a/hw/display/virtio-gpu.c
+++ b/hw/display/virtio-gpu.c
@@ -430,6 +430,16 @@ static void virtio_gpu_disable_scanout(VirtIOGPU *g, int scanout_id)
static void virtio_gpu_resource_destroy(VirtIOGPU *g,
struct virtio_gpu_simple_resource *res)
{
+ int i;
+
+ if (res->scanout_bitmask) {
+ for (i = 0; i < g->conf.max_outputs; i++) {
+ if (res->scanout_bitmask & (1 << i)) {
+ virtio_gpu_disable_scanout(g, i);
+ }
+ }
+ }
+
pixman_image_unref(res->image);
virtio_gpu_cleanup_mapping(res);
QTAILQ_REMOVE(&g->reslist, res, next);
Reported backtraces can be found here: https://paste.fedoraproject.org/paste/OUDEfCk1IY7xiy0I0PDlkw
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1784900/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* [Qemu-devel] [Bug 1784900] Re: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
2018-08-01 16:39 [Qemu-devel] [Bug 1784900] [NEW] QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline Stefan Berger
2018-08-01 16:40 ` [Qemu-devel] [Bug 1784900] " Daniel Berrange
2018-08-01 17:19 ` Dr. David Alan Gilbert
@ 2018-08-02 0:03 ` Stefan Berger
2018-08-02 1:00 ` Stefan Berger
` (4 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Stefan Berger @ 2018-08-02 0:03 UTC (permalink / raw)
To: qemu-devel
The reason for this bug is memory corruption in glibc's memory chunk
header that is in front of some bitmap pixman is allocating and
maintaining as image->bits.free_me. I set a memory watchpoint to this
memory location and this code here triggered it and corrupted what seems
to be a memory chunk size indicator, which upon free() causes print of
'invalid pointer' by glibc:
Thread 1 "qemu-system-x86" hit Hardware watchpoint 2: *0x7f6160361d88
Old value = 3145749
New value = 0
vga_draw_line8 (vga=vga@entry=0x556d68549b30, d=0x7f6160361d80 "", d@entry=0x7f61603615e0 "", addr=983528, width=<optimized out>)
at /home/stefanb/tmp/qemu-tip/hw/display/vga-helpers.h:297
297 ((uint32_t *)d)[3] = palette[vga_read_byte(vga, addr + 3)];
(gdb) bt
#0 vga_draw_line8 (vga=vga@entry=0x556d68549b30, d=0x7f6160361d80 "", d@entry=0x7f61603615e0 "", addr=983528, width=<optimized out>)
at /home/stefanb/tmp/qemu-tip/hw/display/vga-helpers.h:297
#1 0x0000556d659918ee in vga_draw_graphic (full_update=0, s=0x556d68549b30) at /home/stefanb/tmp/qemu-tip/hw/display/vga.c:1695
#2 vga_update_display (opaque=0x556d68549b30) at /home/stefanb/tmp/qemu-tip/hw/display/vga.c:1782
#3 0x0000556d65c0cd92 in vnc_refresh (dcl=0x556d683055a8) at ui/vnc.c:3046
#4 0x0000556d65bff702 in dpy_refresh (s=0x556d686be540) at ui/console.c:1658
#5 gui_update (opaque=0x556d686be540) at ui/console.c:205
#6 0x0000556d65d0deac in timerlist_run_timers (timer_list=0x556d66de0e00) at util/qemu-timer.c:536
#7 0x0000556d65d0e0f7 in qemu_clock_run_timers (type=QEMU_CLOCK_REALTIME) at util/qemu-timer.c:547
#8 qemu_clock_run_all_timers () at util/qemu-timer.c:674
#9 0x0000556d65d0e5d1 in main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:503
#10 0x0000556d65a5f2ee in main_loop () at vl.c:1865
#11 0x0000556d658ff166 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4643
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1784900
Title:
QEMU (frontend) crashes upon warm reboot with virtio-gpu device and
vga=775 on Linux cmdline
Status in QEMU:
New
Bug description:
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.
The VM was used remotely via virt-manager and VNC.
Bisecting the code lead to the following patch that introduced the
bug:
commit 1fccd7c5a9a722a9cbf1bc91693f4618034f01ac (HEAD, refs/bisect/bad)
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Mon Jul 2 18:24:43 2018 +0200
virtio-gpu: disable scanout when backing resource is destroyed
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-4-kraxel@redhat.com
diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
index 336dc59007..08cd567218 100644
--- a/hw/display/virtio-gpu.c
+++ b/hw/display/virtio-gpu.c
@@ -430,6 +430,16 @@ static void virtio_gpu_disable_scanout(VirtIOGPU *g, int scanout_id)
static void virtio_gpu_resource_destroy(VirtIOGPU *g,
struct virtio_gpu_simple_resource *res)
{
+ int i;
+
+ if (res->scanout_bitmask) {
+ for (i = 0; i < g->conf.max_outputs; i++) {
+ if (res->scanout_bitmask & (1 << i)) {
+ virtio_gpu_disable_scanout(g, i);
+ }
+ }
+ }
+
pixman_image_unref(res->image);
virtio_gpu_cleanup_mapping(res);
QTAILQ_REMOVE(&g->reslist, res, next);
Reported backtraces can be found here: https://paste.fedoraproject.org/paste/OUDEfCk1IY7xiy0I0PDlkw
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1784900/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* [Qemu-devel] [Bug 1784900] Re: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
2018-08-01 16:39 [Qemu-devel] [Bug 1784900] [NEW] QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline Stefan Berger
` (2 preceding siblings ...)
2018-08-02 0:03 ` Stefan Berger
@ 2018-08-02 1:00 ` Stefan Berger
2018-08-02 12:05 ` Stefan Berger
` (3 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Stefan Berger @ 2018-08-02 1:00 UTC (permalink / raw)
To: qemu-devel
This patch here fixes the issue, but is likely introducing inefficiency.
There are two if statements above the patch that should set full_update
= 1 due to 'some change', but none of them triggers it. So I think the
surface is wrong and needs to be recreated.
diff --git a/hw/display/vga.c b/hw/display/vga.c
index ed476e4e80..71b5684994 100644
--- a/hw/display/vga.c
+++ b/hw/display/vga.c
@@ -1571,6 +1571,7 @@ static void vga_draw_graphic(VGACommonState *s, int full_update)
* must be updated with the new base address */
full_update = 1;
}
+ full_update = 1;
if (full_update) {
if (share_surface) {
A better solution may be this one here:
diff --git a/hw/display/vga.c b/hw/display/vga.c
index ed476e4e80..4f365b6d43 100644
--- a/hw/display/vga.c
+++ b/hw/display/vga.c
@@ -1566,7 +1566,7 @@ static void vga_draw_graphic(VGACommonState *s, int full_update)
full_update = 1;
}
if (surface_data(surface) != s->vram_ptr + (s->start_addr * 4)
- && is_buffer_shared(surface)) {
+ /*&& is_buffer_shared(surface)*/) {
/* base address changed (page flip) -> shared display surfaces
* must be updated with the new base address */
full_update = 1;
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1784900
Title:
QEMU (frontend) crashes upon warm reboot with virtio-gpu device and
vga=775 on Linux cmdline
Status in QEMU:
New
Bug description:
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.
The VM was used remotely via virt-manager and VNC.
Bisecting the code lead to the following patch that introduced the
bug:
commit 1fccd7c5a9a722a9cbf1bc91693f4618034f01ac (HEAD, refs/bisect/bad)
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Mon Jul 2 18:24:43 2018 +0200
virtio-gpu: disable scanout when backing resource is destroyed
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-4-kraxel@redhat.com
diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
index 336dc59007..08cd567218 100644
--- a/hw/display/virtio-gpu.c
+++ b/hw/display/virtio-gpu.c
@@ -430,6 +430,16 @@ static void virtio_gpu_disable_scanout(VirtIOGPU *g, int scanout_id)
static void virtio_gpu_resource_destroy(VirtIOGPU *g,
struct virtio_gpu_simple_resource *res)
{
+ int i;
+
+ if (res->scanout_bitmask) {
+ for (i = 0; i < g->conf.max_outputs; i++) {
+ if (res->scanout_bitmask & (1 << i)) {
+ virtio_gpu_disable_scanout(g, i);
+ }
+ }
+ }
+
pixman_image_unref(res->image);
virtio_gpu_cleanup_mapping(res);
QTAILQ_REMOVE(&g->reslist, res, next);
Reported backtraces can be found here: https://paste.fedoraproject.org/paste/OUDEfCk1IY7xiy0I0PDlkw
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1784900/+subscriptions
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Qemu-devel] [Bug 1784900] Re: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
2018-08-01 16:39 [Qemu-devel] [Bug 1784900] [NEW] QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline Stefan Berger
` (3 preceding siblings ...)
2018-08-02 1:00 ` Stefan Berger
@ 2018-08-02 12:05 ` Stefan Berger
2018-08-02 12:13 ` no-reply
2018-08-02 16:06 ` Stefan Berger
` (2 subsequent siblings)
7 siblings, 1 reply; 10+ messages in thread
From: Stefan Berger @ 2018-08-02 12:05 UTC (permalink / raw)
To: qemu-devel
Another patch that seems to work tries to remember the old surface:
diff --git a/hw/display/vga.c b/hw/display/vga.c
index ed476e4e80..1aae6a6d3b 100644
--- a/hw/display/vga.c
+++ b/hw/display/vga.c
@@ -1554,7 +1554,8 @@ static void vga_draw_graphic(VGACommonState *s, int full_update)
height != s->last_height ||
s->last_depth != depth ||
s->last_byteswap != byteswap ||
- share_surface != is_buffer_shared(surface)) {
+ share_surface != is_buffer_shared(surface) ||
+ s->last_surface != surface) {
/* display parameters changed -> need new display surface */
s->last_scr_width = disp_width;
s->last_scr_height = height;
@@ -1563,8 +1564,10 @@ static void vga_draw_graphic(VGACommonState *s, int full_update)
s->last_line_offset = s->line_offset;
s->last_depth = depth;
s->last_byteswap = byteswap;
+ s->last_surface = surface;
full_update = 1;
}
+ fprintf(stderr, "%p vs %p share_surface: %d surface: %p\n", surface_data(surface), s->vram_ptr + (s->start_addr * 4), share_surface, surface);
if (surface_data(surface) != s->vram_ptr + (s->start_addr * 4)
&& is_buffer_shared(surface)) {
/* base address changed (page flip) -> shared display surfaces
diff --git a/hw/display/vga_int.h b/hw/display/vga_int.h
index f8fcf62a56..91afc52b0e 100644
--- a/hw/display/vga_int.h
+++ b/hw/display/vga_int.h
@@ -122,6 +122,7 @@ typedef struct VGACommonState {
uint32_t last_width, last_height; /* in chars or pixels */
uint32_t last_scr_width, last_scr_height; /* in pixels */
uint32_t last_depth; /* in bits */
+ void *last_surface;
bool last_byteswap;
bool force_shadow;
uint8_t cursor_start, cursor_end;
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1784900
Title:
QEMU (frontend) crashes upon warm reboot with virtio-gpu device and
vga=775 on Linux cmdline
Status in QEMU:
New
Bug description:
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.
The VM was used remotely via virt-manager and VNC.
Bisecting the code lead to the following patch that introduced the
bug:
commit 1fccd7c5a9a722a9cbf1bc91693f4618034f01ac (HEAD, refs/bisect/bad)
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Mon Jul 2 18:24:43 2018 +0200
virtio-gpu: disable scanout when backing resource is destroyed
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-4-kraxel@redhat.com
diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
index 336dc59007..08cd567218 100644
--- a/hw/display/virtio-gpu.c
+++ b/hw/display/virtio-gpu.c
@@ -430,6 +430,16 @@ static void virtio_gpu_disable_scanout(VirtIOGPU *g, int scanout_id)
static void virtio_gpu_resource_destroy(VirtIOGPU *g,
struct virtio_gpu_simple_resource *res)
{
+ int i;
+
+ if (res->scanout_bitmask) {
+ for (i = 0; i < g->conf.max_outputs; i++) {
+ if (res->scanout_bitmask & (1 << i)) {
+ virtio_gpu_disable_scanout(g, i);
+ }
+ }
+ }
+
pixman_image_unref(res->image);
virtio_gpu_cleanup_mapping(res);
QTAILQ_REMOVE(&g->reslist, res, next);
Reported backtraces can be found here: https://paste.fedoraproject.org/paste/OUDEfCk1IY7xiy0I0PDlkw
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1784900/+subscriptions
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [Qemu-devel] [Bug 1784900] Re: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
2018-08-02 12:05 ` Stefan Berger
@ 2018-08-02 12:13 ` no-reply
0 siblings, 0 replies; 10+ messages in thread
From: no-reply @ 2018-08-02 12:13 UTC (permalink / raw)
To: 1784900; +Cc: famz, qemu-devel
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 153321150379.28572.4771679861864409417.malone@chaenomeles.canonical.com
Subject: [Qemu-devel] [Bug 1784900] Re: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
=== TEST SCRIPT BEGIN ===
#!/bin/bash
BASE=base
n=1
total=$(git log --oneline $BASE.. | wc -l)
failed=0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
commits="$(git log --format=%H --reverse $BASE..)"
for c in $commits; do
echo "Checking PATCH $n/$total: $(git log -n 1 --format=%s $c)..."
if ! git show $c --format=email | ./scripts/checkpatch.pl --mailback -; then
failed=1
echo
fi
n=$((n+1))
done
exit $failed
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/153321150379.28572.4771679861864409417.malone@chaenomeles.canonical.com -> patchew/153321150379.28572.4771679861864409417.malone@chaenomeles.canonical.com
Switched to a new branch 'test'
1a366fd405 QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
=== OUTPUT BEGIN ===
Checking PATCH 1/1: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline...
ERROR: line over 90 characters
#32: FILE: hw/display/vga.c:1571:
+ fprintf(stderr, "%p vs %p share_surface: %d surface: %p\n", surface_data(surface), s->vram_ptr + (s->start_addr * 4), share_surface, surface);
ERROR: Missing Signed-off-by: line(s)
total: 2 errors, 0 warnings, 26 lines checked
Your patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Qemu-devel] [Bug 1784900] Re: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
2018-08-01 16:39 [Qemu-devel] [Bug 1784900] [NEW] QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline Stefan Berger
` (4 preceding siblings ...)
2018-08-02 12:05 ` Stefan Berger
@ 2018-08-02 16:06 ` Stefan Berger
2018-08-06 9:57 ` elmarco
2018-08-15 7:34 ` Thomas Huth
7 siblings, 0 replies; 10+ messages in thread
From: Stefan Berger @ 2018-08-02 16:06 UTC (permalink / raw)
To: qemu-devel
On my system vga_draw_graphic is called with a surface_width(surface) =
1280, the next time surface_width(surface) = 1024, and then the next
time again with surface_width(surface) = 1280. So it's a quick
resolution change. Each time the surface pointer changes as well as
surface_width(surface) and surface_data(surface). Do NOT try to access
the s->last_surface with surface_data(s->last_surface) -- it likely has
been freed already.
So my guess is we could add (a subset of) checks like this one here:
if (s->last_surface != surface ||
s->last_surface_width != surface_width(surface) ||
s->last_surface_height != surface_height(surface) ||
s->last_surface_data != surface_data(surface)) {
s->last_surface = surface;
s->last_surface_width = surface_width(surface);
...
full_update = 1;
}
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1784900
Title:
QEMU (frontend) crashes upon warm reboot with virtio-gpu device and
vga=775 on Linux cmdline
Status in QEMU:
New
Bug description:
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.
The VM was used remotely via virt-manager and VNC.
Bisecting the code lead to the following patch that introduced the
bug:
commit 1fccd7c5a9a722a9cbf1bc91693f4618034f01ac (HEAD, refs/bisect/bad)
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Mon Jul 2 18:24:43 2018 +0200
virtio-gpu: disable scanout when backing resource is destroyed
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-4-kraxel@redhat.com
diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
index 336dc59007..08cd567218 100644
--- a/hw/display/virtio-gpu.c
+++ b/hw/display/virtio-gpu.c
@@ -430,6 +430,16 @@ static void virtio_gpu_disable_scanout(VirtIOGPU *g, int scanout_id)
static void virtio_gpu_resource_destroy(VirtIOGPU *g,
struct virtio_gpu_simple_resource *res)
{
+ int i;
+
+ if (res->scanout_bitmask) {
+ for (i = 0; i < g->conf.max_outputs; i++) {
+ if (res->scanout_bitmask & (1 << i)) {
+ virtio_gpu_disable_scanout(g, i);
+ }
+ }
+ }
+
pixman_image_unref(res->image);
virtio_gpu_cleanup_mapping(res);
QTAILQ_REMOVE(&g->reslist, res, next);
Reported backtraces can be found here: https://paste.fedoraproject.org/paste/OUDEfCk1IY7xiy0I0PDlkw
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1784900/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* [Qemu-devel] [Bug 1784900] Re: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
2018-08-01 16:39 [Qemu-devel] [Bug 1784900] [NEW] QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline Stefan Berger
` (5 preceding siblings ...)
2018-08-02 16:06 ` Stefan Berger
@ 2018-08-06 9:57 ` elmarco
2018-08-15 7:34 ` Thomas Huth
7 siblings, 0 replies; 10+ messages in thread
From: elmarco @ 2018-08-06 9:57 UTC (permalink / raw)
To: qemu-devel
see also "[PATCH] virtio-gpu: fix crashes upon warm reboot with vga
mode" for a potential fix
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1784900
Title:
QEMU (frontend) crashes upon warm reboot with virtio-gpu device and
vga=775 on Linux cmdline
Status in QEMU:
New
Bug description:
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.
The VM was used remotely via virt-manager and VNC.
Bisecting the code lead to the following patch that introduced the
bug:
commit 1fccd7c5a9a722a9cbf1bc91693f4618034f01ac (HEAD, refs/bisect/bad)
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Mon Jul 2 18:24:43 2018 +0200
virtio-gpu: disable scanout when backing resource is destroyed
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-4-kraxel@redhat.com
diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
index 336dc59007..08cd567218 100644
--- a/hw/display/virtio-gpu.c
+++ b/hw/display/virtio-gpu.c
@@ -430,6 +430,16 @@ static void virtio_gpu_disable_scanout(VirtIOGPU *g, int scanout_id)
static void virtio_gpu_resource_destroy(VirtIOGPU *g,
struct virtio_gpu_simple_resource *res)
{
+ int i;
+
+ if (res->scanout_bitmask) {
+ for (i = 0; i < g->conf.max_outputs; i++) {
+ if (res->scanout_bitmask & (1 << i)) {
+ virtio_gpu_disable_scanout(g, i);
+ }
+ }
+ }
+
pixman_image_unref(res->image);
virtio_gpu_cleanup_mapping(res);
QTAILQ_REMOVE(&g->reslist, res, next);
Reported backtraces can be found here: https://paste.fedoraproject.org/paste/OUDEfCk1IY7xiy0I0PDlkw
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1784900/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* [Qemu-devel] [Bug 1784900] Re: QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline
2018-08-01 16:39 [Qemu-devel] [Bug 1784900] [NEW] QEMU (frontend) crashes upon warm reboot with virtio-gpu device and vga=775 on Linux cmdline Stefan Berger
` (6 preceding siblings ...)
2018-08-06 9:57 ` elmarco
@ 2018-08-15 7:34 ` Thomas Huth
7 siblings, 0 replies; 10+ messages in thread
From: Thomas Huth @ 2018-08-15 7:34 UTC (permalink / raw)
To: qemu-devel
Fix has been added here:
https://git.qemu.org/?p=qemu.git;a=commitdiff;h=93f874fe9dbe0b997b5a94
** Changed in: qemu
Status: New => Fix Released
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1784900
Title:
QEMU (frontend) crashes upon warm reboot with virtio-gpu device and
vga=775 on Linux cmdline
Status in QEMU:
Fix Released
Bug description:
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.
The VM was used remotely via virt-manager and VNC.
Bisecting the code lead to the following patch that introduced the
bug:
commit 1fccd7c5a9a722a9cbf1bc91693f4618034f01ac (HEAD, refs/bisect/bad)
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Mon Jul 2 18:24:43 2018 +0200
virtio-gpu: disable scanout when backing resource is destroyed
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-4-kraxel@redhat.com
diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
index 336dc59007..08cd567218 100644
--- a/hw/display/virtio-gpu.c
+++ b/hw/display/virtio-gpu.c
@@ -430,6 +430,16 @@ static void virtio_gpu_disable_scanout(VirtIOGPU *g, int scanout_id)
static void virtio_gpu_resource_destroy(VirtIOGPU *g,
struct virtio_gpu_simple_resource *res)
{
+ int i;
+
+ if (res->scanout_bitmask) {
+ for (i = 0; i < g->conf.max_outputs; i++) {
+ if (res->scanout_bitmask & (1 << i)) {
+ virtio_gpu_disable_scanout(g, i);
+ }
+ }
+ }
+
pixman_image_unref(res->image);
virtio_gpu_cleanup_mapping(res);
QTAILQ_REMOVE(&g->reslist, res, next);
Reported backtraces can be found here: https://paste.fedoraproject.org/paste/OUDEfCk1IY7xiy0I0PDlkw
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1784900/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread