* [Qemu-devel] [Bug 1787070] [NEW] Guests using the qxl-vga are freezing
@ 2018-08-15 1:58 Leonardo Müller
2018-08-15 6:43 ` [Qemu-devel] [Bug 1787070] " Gerd Hoffmann
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Leonardo Müller @ 2018-08-15 1:58 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
I have noticed that guests using qxl-vga are freezing. They may freeze
after a few minutes or after many hours. The freeze consists of the
entire system hanging, except the cursor, but the cursor animation stops
too. Changing to tty is not possible after this. There are three things
noticed in common on the guests when they freeze:
-The guest is using the QXL VGA (freezes weren't observed with other VGAs);
-A new workload is starting;
-The mouse cursor is the animated as the one of loading. For example, https://i.imgur.com/raQFteG.png
The host is Xubuntu 18.04 amd64, QEMU version is 3.0.0-dirty. The guests tested were:
-openSUSE Tumbleweed;
-openSUSE Leap 15;
-Xubuntu 18.04 Bionic Beaver;
-CentOS 7.
With openSUSE guests, the install process couldn't even be finished, as
the installer would freeze. There were 2 GB of available memory (checked
in a tty before the freeze) and netconsole was enabled. Unfortunately,
it was impossible to obtain any information from them. This is an image
of one openSUSE guest frozen: https://i.imgur.com/ZP0eQKq.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 3072 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=leap.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc -cdrom "openSUSE-Leap-15.0-DVD-x86_64.iso" -boot
d
With CentOS guests, the install process fail sometimes, but sometimes
it's able to install. However, on the yum update, it would freeze too.
In one instance it froze while updating glibc, which made the guest
unbootable. https://i.imgur.com/B3WhSDX.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 2048 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=centos.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device virtio-vga,virgl=true -display gtk -monitor vc
-serial vc -cdrom "CentOS-7-livecd-GNOME-x86_64.iso" -bios
/usr/share/ovmf/OVMF.fd
With Xubuntu 18.04 guests, the system worked for many hours until the
freeze happened. On this case it happened when opening Audacious.
Fortunately, the logging services worked for some time, which allowed me
to get a relevant message which can be seen at http://termbin.com/nuof .
It repeated a few times, but then the logging stopped.
https://i.imgur.com/2zckqj5.png shows the guest screen in the moment it
froze.
The command line used was:
qemu-system-x86_64 -nodefaults -m 1024 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=xubmini -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc
I'm sorry for not having more detailed information but, even setting
netconsole, openSUSE and CentOS guests were unable to print any
information.
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1787070
Title:
Guests using the qxl-vga are freezing
Status in QEMU:
New
Bug description:
I have noticed that guests using qxl-vga are freezing. They may freeze
after a few minutes or after many hours. The freeze consists of the
entire system hanging, except the cursor, but the cursor animation
stops too. Changing to tty is not possible after this. There are three
things noticed in common on the guests when they freeze:
-The guest is using the QXL VGA (freezes weren't observed with other VGAs);
-A new workload is starting;
-The mouse cursor is the animated as the one of loading. For example, https://i.imgur.com/raQFteG.png
The host is Xubuntu 18.04 amd64, QEMU version is 3.0.0-dirty. The guests tested were:
-openSUSE Tumbleweed;
-openSUSE Leap 15;
-Xubuntu 18.04 Bionic Beaver;
-CentOS 7.
With openSUSE guests, the install process couldn't even be finished,
as the installer would freeze. There were 2 GB of available memory
(checked in a tty before the freeze) and netconsole was enabled.
Unfortunately, it was impossible to obtain any information from them.
This is an image of one openSUSE guest frozen:
https://i.imgur.com/ZP0eQKq.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 3072 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=leap.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc -cdrom "openSUSE-Leap-15.0-DVD-x86_64.iso"
-boot d
With CentOS guests, the install process fail sometimes, but sometimes
it's able to install. However, on the yum update, it would freeze too.
In one instance it froze while updating glibc, which made the guest
unbootable. https://i.imgur.com/B3WhSDX.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 2048 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=centos.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device virtio-vga,virgl=true -display gtk -monitor
vc -serial vc -cdrom "CentOS-7-livecd-GNOME-x86_64.iso" -bios
/usr/share/ovmf/OVMF.fd
With Xubuntu 18.04 guests, the system worked for many hours until the
freeze happened. On this case it happened when opening Audacious.
Fortunately, the logging services worked for some time, which allowed
me to get a relevant message which can be seen at
http://termbin.com/nuof . It repeated a few times, but then the
logging stopped. https://i.imgur.com/2zckqj5.png shows the guest
screen in the moment it froze.
The command line used was:
qemu-system-x86_64 -nodefaults -m 1024 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=xubmini -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc
I'm sorry for not having more detailed information but, even setting
netconsole, openSUSE and CentOS guests were unable to print any
information.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1787070/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [Bug 1787070] Re: Guests using the qxl-vga are freezing
2018-08-15 1:58 [Qemu-devel] [Bug 1787070] [NEW] Guests using the qxl-vga are freezing Leonardo Müller
@ 2018-08-15 6:43 ` Gerd Hoffmann
2018-08-15 13:44 ` Leonardo Müller
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Gerd Hoffmann @ 2018-08-15 6:43 UTC (permalink / raw)
To: qemu-devel
Can you attach gdb to qemu when the guest hangs, then run "thread apply
all bt"?
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1787070
Title:
Guests using the qxl-vga are freezing
Status in QEMU:
New
Bug description:
I have noticed that guests using qxl-vga are freezing. They may freeze
after a few minutes or after many hours. The freeze consists of the
entire system hanging, except the cursor, but the cursor animation
stops too. Changing to tty is not possible after this. There are three
things noticed in common on the guests when they freeze:
-The guest is using the QXL VGA (freezes weren't observed with other VGAs);
-A new workload is starting;
-The mouse cursor is the animated as the one of loading. For example, https://i.imgur.com/raQFteG.png
The host is Xubuntu 18.04 amd64, QEMU version is 3.0.0-dirty. The guests tested were:
-openSUSE Tumbleweed;
-openSUSE Leap 15;
-Xubuntu 18.04 Bionic Beaver;
-CentOS 7.
With openSUSE guests, the install process couldn't even be finished,
as the installer would freeze. There were 2 GB of available memory
(checked in a tty before the freeze) and netconsole was enabled.
Unfortunately, it was impossible to obtain any information from them.
This is an image of one openSUSE guest frozen:
https://i.imgur.com/ZP0eQKq.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 3072 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=leap.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc -cdrom "openSUSE-Leap-15.0-DVD-x86_64.iso"
-boot d
With CentOS guests, the install process fail sometimes, but sometimes
it's able to install. However, on the yum update, it would freeze too.
In one instance it froze while updating glibc, which made the guest
unbootable. https://i.imgur.com/B3WhSDX.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 2048 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=centos.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device virtio-vga,virgl=true -display gtk -monitor
vc -serial vc -cdrom "CentOS-7-livecd-GNOME-x86_64.iso" -bios
/usr/share/ovmf/OVMF.fd
With Xubuntu 18.04 guests, the system worked for many hours until the
freeze happened. On this case it happened when opening Audacious.
Fortunately, the logging services worked for some time, which allowed
me to get a relevant message which can be seen at
http://termbin.com/nuof . It repeated a few times, but then the
logging stopped. https://i.imgur.com/2zckqj5.png shows the guest
screen in the moment it froze.
The command line used was:
qemu-system-x86_64 -nodefaults -m 1024 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=xubmini -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc
I'm sorry for not having more detailed information but, even setting
netconsole, openSUSE and CentOS guests were unable to print any
information.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1787070/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [Bug 1787070] Re: Guests using the qxl-vga are freezing
2018-08-15 1:58 [Qemu-devel] [Bug 1787070] [NEW] Guests using the qxl-vga are freezing Leonardo Müller
2018-08-15 6:43 ` [Qemu-devel] [Bug 1787070] " Gerd Hoffmann
@ 2018-08-15 13:44 ` Leonardo Müller
2018-08-16 10:11 ` Gerd Hoffmann
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Leonardo Müller @ 2018-08-15 13:44 UTC (permalink / raw)
To: qemu-devel
I have run the openSUSE guest again, the output of the gdb command can
be seen at https://paste.ubuntu.com/p/mCRMvkNWYq/
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1787070
Title:
Guests using the qxl-vga are freezing
Status in QEMU:
New
Bug description:
I have noticed that guests using qxl-vga are freezing. They may freeze
after a few minutes or after many hours. The freeze consists of the
entire system hanging, except the cursor, but the cursor animation
stops too. Changing to tty is not possible after this. There are three
things noticed in common on the guests when they freeze:
-The guest is using the QXL VGA (freezes weren't observed with other VGAs);
-A new workload is starting;
-The mouse cursor is the animated as the one of loading. For example, https://i.imgur.com/raQFteG.png
The host is Xubuntu 18.04 amd64, QEMU version is 3.0.0-dirty. The guests tested were:
-openSUSE Tumbleweed;
-openSUSE Leap 15;
-Xubuntu 18.04 Bionic Beaver;
-CentOS 7.
With openSUSE guests, the install process couldn't even be finished,
as the installer would freeze. There were 2 GB of available memory
(checked in a tty before the freeze) and netconsole was enabled.
Unfortunately, it was impossible to obtain any information from them.
This is an image of one openSUSE guest frozen:
https://i.imgur.com/ZP0eQKq.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 3072 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=leap.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc -cdrom "openSUSE-Leap-15.0-DVD-x86_64.iso"
-boot d
With CentOS guests, the install process fail sometimes, but sometimes
it's able to install. However, on the yum update, it would freeze too.
In one instance it froze while updating glibc, which made the guest
unbootable. https://i.imgur.com/B3WhSDX.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 2048 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=centos.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device virtio-vga,virgl=true -display gtk -monitor
vc -serial vc -cdrom "CentOS-7-livecd-GNOME-x86_64.iso" -bios
/usr/share/ovmf/OVMF.fd
With Xubuntu 18.04 guests, the system worked for many hours until the
freeze happened. On this case it happened when opening Audacious.
Fortunately, the logging services worked for some time, which allowed
me to get a relevant message which can be seen at
http://termbin.com/nuof . It repeated a few times, but then the
logging stopped. https://i.imgur.com/2zckqj5.png shows the guest
screen in the moment it froze.
The command line used was:
qemu-system-x86_64 -nodefaults -m 1024 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=xubmini -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc
I'm sorry for not having more detailed information but, even setting
netconsole, openSUSE and CentOS guests were unable to print any
information.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1787070/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [Bug 1787070] Re: Guests using the qxl-vga are freezing
2018-08-15 1:58 [Qemu-devel] [Bug 1787070] [NEW] Guests using the qxl-vga are freezing Leonardo Müller
2018-08-15 6:43 ` [Qemu-devel] [Bug 1787070] " Gerd Hoffmann
2018-08-15 13:44 ` Leonardo Müller
@ 2018-08-16 10:11 ` Gerd Hoffmann
2018-08-16 13:11 ` Leonardo Müller
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Gerd Hoffmann @ 2018-08-16 10:11 UTC (permalink / raw)
To: qemu-devel
Hmm, nothing obvious in the stack trace.
Also doesn't reproduce here.
What qemu version is this?
If older than 3.0: Does it still happen for you with qemu 3.0?
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1787070
Title:
Guests using the qxl-vga are freezing
Status in QEMU:
New
Bug description:
I have noticed that guests using qxl-vga are freezing. They may freeze
after a few minutes or after many hours. The freeze consists of the
entire system hanging, except the cursor, but the cursor animation
stops too. Changing to tty is not possible after this. There are three
things noticed in common on the guests when they freeze:
-The guest is using the QXL VGA (freezes weren't observed with other VGAs);
-A new workload is starting;
-The mouse cursor is the animated as the one of loading. For example, https://i.imgur.com/raQFteG.png
The host is Xubuntu 18.04 amd64, QEMU version is 3.0.0-dirty. The guests tested were:
-openSUSE Tumbleweed;
-openSUSE Leap 15;
-Xubuntu 18.04 Bionic Beaver;
-CentOS 7.
With openSUSE guests, the install process couldn't even be finished,
as the installer would freeze. There were 2 GB of available memory
(checked in a tty before the freeze) and netconsole was enabled.
Unfortunately, it was impossible to obtain any information from them.
This is an image of one openSUSE guest frozen:
https://i.imgur.com/ZP0eQKq.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 3072 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=leap.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc -cdrom "openSUSE-Leap-15.0-DVD-x86_64.iso"
-boot d
With CentOS guests, the install process fail sometimes, but sometimes
it's able to install. However, on the yum update, it would freeze too.
In one instance it froze while updating glibc, which made the guest
unbootable. https://i.imgur.com/B3WhSDX.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 2048 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=centos.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device virtio-vga,virgl=true -display gtk -monitor
vc -serial vc -cdrom "CentOS-7-livecd-GNOME-x86_64.iso" -bios
/usr/share/ovmf/OVMF.fd
With Xubuntu 18.04 guests, the system worked for many hours until the
freeze happened. On this case it happened when opening Audacious.
Fortunately, the logging services worked for some time, which allowed
me to get a relevant message which can be seen at
http://termbin.com/nuof . It repeated a few times, but then the
logging stopped. https://i.imgur.com/2zckqj5.png shows the guest
screen in the moment it froze.
The command line used was:
qemu-system-x86_64 -nodefaults -m 1024 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=xubmini -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc
I'm sorry for not having more detailed information but, even setting
netconsole, openSUSE and CentOS guests were unable to print any
information.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1787070/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [Bug 1787070] Re: Guests using the qxl-vga are freezing
2018-08-15 1:58 [Qemu-devel] [Bug 1787070] [NEW] Guests using the qxl-vga are freezing Leonardo Müller
` (2 preceding siblings ...)
2018-08-16 10:11 ` Gerd Hoffmann
@ 2018-08-16 13:11 ` Leonardo Müller
2020-11-13 15:46 ` Thomas Huth
2021-01-13 4:17 ` Launchpad Bug Tracker
5 siblings, 0 replies; 7+ messages in thread
From: Leonardo Müller @ 2018-08-16 13:11 UTC (permalink / raw)
To: qemu-devel
QEMU version I'm using now is v3.0.0-65-g1d746ee95d-dirty and has the
problem, the first version I observed the problem was 2.11 from Ubuntu's
repositories.
The fact you are unable to reproduce the bug is unsurprising to me: this
is not the first time I have a problem with QXL VGA and others are
unable to reproduce. I don't understand why QXL fails so consistently
here.
Another QXL bug I reported:
https://bugs.launchpad.net/ubuntu/bionic/+source/qemu/+bug/1755912
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1787070
Title:
Guests using the qxl-vga are freezing
Status in QEMU:
New
Bug description:
I have noticed that guests using qxl-vga are freezing. They may freeze
after a few minutes or after many hours. The freeze consists of the
entire system hanging, except the cursor, but the cursor animation
stops too. Changing to tty is not possible after this. There are three
things noticed in common on the guests when they freeze:
-The guest is using the QXL VGA (freezes weren't observed with other VGAs);
-A new workload is starting;
-The mouse cursor is the animated as the one of loading. For example, https://i.imgur.com/raQFteG.png
The host is Xubuntu 18.04 amd64, QEMU version is 3.0.0-dirty. The guests tested were:
-openSUSE Tumbleweed;
-openSUSE Leap 15;
-Xubuntu 18.04 Bionic Beaver;
-CentOS 7.
With openSUSE guests, the install process couldn't even be finished,
as the installer would freeze. There were 2 GB of available memory
(checked in a tty before the freeze) and netconsole was enabled.
Unfortunately, it was impossible to obtain any information from them.
This is an image of one openSUSE guest frozen:
https://i.imgur.com/ZP0eQKq.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 3072 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=leap.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc -cdrom "openSUSE-Leap-15.0-DVD-x86_64.iso"
-boot d
With CentOS guests, the install process fail sometimes, but sometimes
it's able to install. However, on the yum update, it would freeze too.
In one instance it froze while updating glibc, which made the guest
unbootable. https://i.imgur.com/B3WhSDX.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 2048 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=centos.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device virtio-vga,virgl=true -display gtk -monitor
vc -serial vc -cdrom "CentOS-7-livecd-GNOME-x86_64.iso" -bios
/usr/share/ovmf/OVMF.fd
With Xubuntu 18.04 guests, the system worked for many hours until the
freeze happened. On this case it happened when opening Audacious.
Fortunately, the logging services worked for some time, which allowed
me to get a relevant message which can be seen at
http://termbin.com/nuof . It repeated a few times, but then the
logging stopped. https://i.imgur.com/2zckqj5.png shows the guest
screen in the moment it froze.
The command line used was:
qemu-system-x86_64 -nodefaults -m 1024 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=xubmini -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc
I'm sorry for not having more detailed information but, even setting
netconsole, openSUSE and CentOS guests were unable to print any
information.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1787070/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Bug 1787070] Re: Guests using the qxl-vga are freezing
2018-08-15 1:58 [Qemu-devel] [Bug 1787070] [NEW] Guests using the qxl-vga are freezing Leonardo Müller
` (3 preceding siblings ...)
2018-08-16 13:11 ` Leonardo Müller
@ 2020-11-13 15:46 ` Thomas Huth
2021-01-13 4:17 ` Launchpad Bug Tracker
5 siblings, 0 replies; 7+ messages in thread
From: Thomas Huth @ 2020-11-13 15:46 UTC (permalink / raw)
To: qemu-devel
The QEMU project is currently considering to move its bug tracking to another system. For this we need to know which bugs are still valid and which could be closed already. Thus we are setting older bugs to "Incomplete" now.
If you still think this bug report here is valid, then please switch the state back to "New" within the next 60 days, otherwise this report will be marked as "Expired". Or mark it as "Fix Released" if the problem has been solved with a newer version of QEMU already. Thank you and sorry for the inconvenience.
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1787070
Title:
Guests using the qxl-vga are freezing
Status in QEMU:
Incomplete
Bug description:
I have noticed that guests using qxl-vga are freezing. They may freeze
after a few minutes or after many hours. The freeze consists of the
entire system hanging, except the cursor, but the cursor animation
stops too. Changing to tty is not possible after this. There are three
things noticed in common on the guests when they freeze:
-The guest is using the QXL VGA (freezes weren't observed with other VGAs);
-A new workload is starting;
-The mouse cursor is the animated as the one of loading. For example, https://i.imgur.com/raQFteG.png
The host is Xubuntu 18.04 amd64, QEMU version is 3.0.0-dirty. The guests tested were:
-openSUSE Tumbleweed;
-openSUSE Leap 15;
-Xubuntu 18.04 Bionic Beaver;
-CentOS 7.
With openSUSE guests, the install process couldn't even be finished,
as the installer would freeze. There were 2 GB of available memory
(checked in a tty before the freeze) and netconsole was enabled.
Unfortunately, it was impossible to obtain any information from them.
This is an image of one openSUSE guest frozen:
https://i.imgur.com/ZP0eQKq.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 3072 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=leap.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc -cdrom "openSUSE-Leap-15.0-DVD-x86_64.iso"
-boot d
With CentOS guests, the install process fail sometimes, but sometimes
it's able to install. However, on the yum update, it would freeze too.
In one instance it froze while updating glibc, which made the guest
unbootable. https://i.imgur.com/B3WhSDX.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 2048 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=centos.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device virtio-vga,virgl=true -display gtk -monitor
vc -serial vc -cdrom "CentOS-7-livecd-GNOME-x86_64.iso" -bios
/usr/share/ovmf/OVMF.fd
With Xubuntu 18.04 guests, the system worked for many hours until the
freeze happened. On this case it happened when opening Audacious.
Fortunately, the logging services worked for some time, which allowed
me to get a relevant message which can be seen at
http://termbin.com/nuof . It repeated a few times, but then the
logging stopped. https://i.imgur.com/2zckqj5.png shows the guest
screen in the moment it froze.
The command line used was:
qemu-system-x86_64 -nodefaults -m 1024 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=xubmini -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc
I'm sorry for not having more detailed information but, even setting
netconsole, openSUSE and CentOS guests were unable to print any
information.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1787070/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Bug 1787070] Re: Guests using the qxl-vga are freezing
2018-08-15 1:58 [Qemu-devel] [Bug 1787070] [NEW] Guests using the qxl-vga are freezing Leonardo Müller
` (4 preceding siblings ...)
2020-11-13 15:46 ` Thomas Huth
@ 2021-01-13 4:17 ` Launchpad Bug Tracker
5 siblings, 0 replies; 7+ messages in thread
From: Launchpad Bug Tracker @ 2021-01-13 4:17 UTC (permalink / raw)
To: qemu-devel
[Expired for QEMU because there has been no activity for 60 days.]
** Changed in: qemu
Status: Incomplete => Expired
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1787070
Title:
Guests using the qxl-vga are freezing
Status in QEMU:
Expired
Bug description:
I have noticed that guests using qxl-vga are freezing. They may freeze
after a few minutes or after many hours. The freeze consists of the
entire system hanging, except the cursor, but the cursor animation
stops too. Changing to tty is not possible after this. There are three
things noticed in common on the guests when they freeze:
-The guest is using the QXL VGA (freezes weren't observed with other VGAs);
-A new workload is starting;
-The mouse cursor is the animated as the one of loading. For example, https://i.imgur.com/raQFteG.png
The host is Xubuntu 18.04 amd64, QEMU version is 3.0.0-dirty. The guests tested were:
-openSUSE Tumbleweed;
-openSUSE Leap 15;
-Xubuntu 18.04 Bionic Beaver;
-CentOS 7.
With openSUSE guests, the install process couldn't even be finished,
as the installer would freeze. There were 2 GB of available memory
(checked in a tty before the freeze) and netconsole was enabled.
Unfortunately, it was impossible to obtain any information from them.
This is an image of one openSUSE guest frozen:
https://i.imgur.com/ZP0eQKq.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 3072 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=leap.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc -cdrom "openSUSE-Leap-15.0-DVD-x86_64.iso"
-boot d
With CentOS guests, the install process fail sometimes, but sometimes
it's able to install. However, on the yum update, it would freeze too.
In one instance it froze while updating glibc, which made the guest
unbootable. https://i.imgur.com/B3WhSDX.png
The command line used was:
qemu-system-x86_64 -nodefaults -m 2048 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=centos.qcow2 -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device virtio-vga,virgl=true -display gtk -monitor
vc -serial vc -cdrom "CentOS-7-livecd-GNOME-x86_64.iso" -bios
/usr/share/ovmf/OVMF.fd
With Xubuntu 18.04 guests, the system worked for many hours until the
freeze happened. On this case it happened when opening Audacious.
Fortunately, the logging services worked for some time, which allowed
me to get a relevant message which can be seen at
http://termbin.com/nuof . It repeated a few times, but then the
logging stopped. https://i.imgur.com/2zckqj5.png shows the guest
screen in the moment it froze.
The command line used was:
qemu-system-x86_64 -nodefaults -m 1024 -M pc,usb=true -accel kvm -cpu
host -smp cores=2,threads=2 -device qemu-xhci -drive
id=centusb,if=none,file=xubmini -device usb-
storage,id=centusb,drive=centusb -netdev user,id=n0 -device usb-
tablet,id=usbtablet -device e1000,netdev=n0 -device usb-
audio,id=usbaudio -device qxl-vga,xres=1366,yres=768 -display gtk
-monitor vc -serial vc
I'm sorry for not having more detailed information but, even setting
netconsole, openSUSE and CentOS guests were unable to print any
information.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1787070/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-01-13 4:37 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-15 1:58 [Qemu-devel] [Bug 1787070] [NEW] Guests using the qxl-vga are freezing Leonardo Müller
2018-08-15 6:43 ` [Qemu-devel] [Bug 1787070] " Gerd Hoffmann
2018-08-15 13:44 ` Leonardo Müller
2018-08-16 10:11 ` Gerd Hoffmann
2018-08-16 13:11 ` Leonardo Müller
2020-11-13 15:46 ` Thomas Huth
2021-01-13 4:17 ` Launchpad Bug Tracker
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.