* [Qemu-devel] [Bug 1715296] [NEW] qemu: invalid serial port configuration @ 2017-09-06 5:39 Tomasz Rostanski 2017-09-06 5:40 ` [Qemu-devel] [Bug 1715296] " Tomasz Rostanski ` (2 more replies) 0 siblings, 3 replies; 4+ messages in thread From: Tomasz Rostanski @ 2017-09-06 5:39 UTC (permalink / raw) To: qemu-devel Public bug reported: The tty_serial_init() function sets the port c_oflags as follows: tty.c_oflag |= OPOST not clearing ONLCR, ONLRET and others. The result is that the postprocess output is enabled and host translates 0xa (LF) to 0xd 0xa (CR LF) which breaks the binary transmissions on serial port even if you set the port to raw mode (no matters if on host and/or guest). The issue has been reported 11 years ago on qemu-devel mailing list: https://lists.nongnu.org/archive/html/qemu-devel/2006-06/msg00196.html There was also a FreeBSD patch including the fix: https://lists.freebsd.org/pipermail/freebsd-ports/2006-October/036390.html I think the correct port configuration is: tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON|IMAXBEL); tty.c_oflag &= ~OPOST; In such case the host will perform no output processing and will pass the data as is. And the guest will be able to configure input/output processing exactly as it wants. ** Affects: qemu Importance: Undecided Status: New -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1715296 Title: qemu: invalid serial port configuration Status in QEMU: New Bug description: The tty_serial_init() function sets the port c_oflags as follows: tty.c_oflag |= OPOST not clearing ONLCR, ONLRET and others. The result is that the postprocess output is enabled and host translates 0xa (LF) to 0xd 0xa (CR LF) which breaks the binary transmissions on serial port even if you set the port to raw mode (no matters if on host and/or guest). The issue has been reported 11 years ago on qemu-devel mailing list: https://lists.nongnu.org/archive/html/qemu-devel/2006-06/msg00196.html There was also a FreeBSD patch including the fix: https://lists.freebsd.org/pipermail/freebsd-ports/2006-October/036390.html I think the correct port configuration is: tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON|IMAXBEL); tty.c_oflag &= ~OPOST; In such case the host will perform no output processing and will pass the data as is. And the guest will be able to configure input/output processing exactly as it wants. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1715296/+subscriptions ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 1715296] Re: qemu: invalid serial port configuration 2017-09-06 5:39 [Qemu-devel] [Bug 1715296] [NEW] qemu: invalid serial port configuration Tomasz Rostanski @ 2017-09-06 5:40 ` Tomasz Rostanski 2018-06-04 12:33 ` Thomas Huth 2018-08-15 7:25 ` Thomas Huth 2 siblings, 0 replies; 4+ messages in thread From: Tomasz Rostanski @ 2017-09-06 5:40 UTC (permalink / raw) To: qemu-devel I believe the following bug is related: https://bugs.launchpad.net/qemu/+bug/1407813 -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1715296 Title: qemu: invalid serial port configuration Status in QEMU: New Bug description: The tty_serial_init() function sets the port c_oflags as follows: tty.c_oflag |= OPOST not clearing ONLCR, ONLRET and others. The result is that the postprocess output is enabled and host translates 0xa (LF) to 0xd 0xa (CR LF) which breaks the binary transmissions on serial port even if you set the port to raw mode (no matters if on host and/or guest). The issue has been reported 11 years ago on qemu-devel mailing list: https://lists.nongnu.org/archive/html/qemu-devel/2006-06/msg00196.html There was also a FreeBSD patch including the fix: https://lists.freebsd.org/pipermail/freebsd-ports/2006-October/036390.html I think the correct port configuration is: tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON|IMAXBEL); tty.c_oflag &= ~OPOST; In such case the host will perform no output processing and will pass the data as is. And the guest will be able to configure input/output processing exactly as it wants. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1715296/+subscriptions ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 1715296] Re: qemu: invalid serial port configuration 2017-09-06 5:39 [Qemu-devel] [Bug 1715296] [NEW] qemu: invalid serial port configuration Tomasz Rostanski 2017-09-06 5:40 ` [Qemu-devel] [Bug 1715296] " Tomasz Rostanski @ 2018-06-04 12:33 ` Thomas Huth 2018-08-15 7:25 ` Thomas Huth 2 siblings, 0 replies; 4+ messages in thread From: Thomas Huth @ 2018-06-04 12:33 UTC (permalink / raw) To: qemu-devel Patch has now been committed here: https://git.qemu.org/?p=qemu.git;a=commitdiff;h=12fb0ac0575df83cec72ec ** Changed in: qemu Status: New => Fix Committed -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1715296 Title: qemu: invalid serial port configuration Status in QEMU: Fix Committed Bug description: The tty_serial_init() function sets the port c_oflags as follows: tty.c_oflag |= OPOST not clearing ONLCR, ONLRET and others. The result is that the postprocess output is enabled and host translates 0xa (LF) to 0xd 0xa (CR LF) which breaks the binary transmissions on serial port even if you set the port to raw mode (no matters if on host and/or guest). The issue has been reported 11 years ago on qemu-devel mailing list: https://lists.nongnu.org/archive/html/qemu-devel/2006-06/msg00196.html There was also a FreeBSD patch including the fix: https://lists.freebsd.org/pipermail/freebsd-ports/2006-October/036390.html I think the correct port configuration is: tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON|IMAXBEL); tty.c_oflag &= ~OPOST; In such case the host will perform no output processing and will pass the data as is. And the guest will be able to configure input/output processing exactly as it wants. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1715296/+subscriptions ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 1715296] Re: qemu: invalid serial port configuration 2017-09-06 5:39 [Qemu-devel] [Bug 1715296] [NEW] qemu: invalid serial port configuration Tomasz Rostanski 2017-09-06 5:40 ` [Qemu-devel] [Bug 1715296] " Tomasz Rostanski 2018-06-04 12:33 ` Thomas Huth @ 2018-08-15 7:25 ` Thomas Huth 2 siblings, 0 replies; 4+ messages in thread From: Thomas Huth @ 2018-08-15 7:25 UTC (permalink / raw) To: qemu-devel ** Changed in: qemu Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1715296 Title: qemu: invalid serial port configuration Status in QEMU: Fix Released Bug description: The tty_serial_init() function sets the port c_oflags as follows: tty.c_oflag |= OPOST not clearing ONLCR, ONLRET and others. The result is that the postprocess output is enabled and host translates 0xa (LF) to 0xd 0xa (CR LF) which breaks the binary transmissions on serial port even if you set the port to raw mode (no matters if on host and/or guest). The issue has been reported 11 years ago on qemu-devel mailing list: https://lists.nongnu.org/archive/html/qemu-devel/2006-06/msg00196.html There was also a FreeBSD patch including the fix: https://lists.freebsd.org/pipermail/freebsd-ports/2006-October/036390.html I think the correct port configuration is: tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON|IMAXBEL); tty.c_oflag &= ~OPOST; In such case the host will perform no output processing and will pass the data as is. And the guest will be able to configure input/output processing exactly as it wants. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1715296/+subscriptions ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-08-15 7:40 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-09-06 5:39 [Qemu-devel] [Bug 1715296] [NEW] qemu: invalid serial port configuration Tomasz Rostanski 2017-09-06 5:40 ` [Qemu-devel] [Bug 1715296] " Tomasz Rostanski 2018-06-04 12:33 ` Thomas Huth 2018-08-15 7:25 ` Thomas Huth
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.