From: Wendy Liang <wendy.liang@xilinx.com>
To: ohad@wizery.com, bjorn.andersson@linaro.org,
michal.simek@xilinx.com, robh+dt@kernel.org,
mark.rutland@arm.com, rajan.vaja@xilinx.com, jollys@xilinx.com
Cc: linux-remoteproc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Wendy Liang <jliang@xilinx.com>
Subject: [PATCH 0/7] Add Xilinx ZynqMP R5 remoteproc driver
Date: Thu, 16 Aug 2018 00:06:23 -0700 [thread overview]
Message-ID: <1534403190-28523-1-git-send-email-jliang@xilinx.com> (raw)
There are Cortex-R5 processors on Xilinx ZynqMP UltraScale+
MPSoC.
This patch is to add an Xilinx ZynqMP R5 remoteproc driver to
enable Linux kernel to bringup R5, and enable communication
between Linux kernel and R5.
This patch series is based on top of Xilinx firmware patch set:
https://patchwork.kernel.org/cover/10555405/
Wendy Liang (7):
firmware: xlnx-zynqmp: Add RPU ioctl enums
firmware: xlnx-zynqmp: Add request ack enums
firmware: xilinx-zynqmp: Add request access capability macro
firmware: xlnx-zynqmp: Add request/release node
firmware: xlnx-zynqmp: Add shutdown/wakeup request
remoteproc: Add Xilinx ZynqMP R5 remoteproc
Documentation: devicetree: Add Xilinx R5 rproc binding
.../remoteproc/xlnx,zynqmp-r5-remoteproc.txt | 81 +++
drivers/firmware/xilinx/zynqmp.c | 65 ++
drivers/remoteproc/Kconfig | 9 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/zynqmp_r5_remoteproc.c | 692 +++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 43 ++
6 files changed, 891 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5-remoteproc.txt
create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Wendy Liang <wendy.liang@xilinx.com>
To: <ohad@wizery.com>, <bjorn.andersson@linaro.org>,
<michal.simek@xilinx.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <rajan.vaja@xilinx.com>,
<jollys@xilinx.com>
Cc: <linux-remoteproc@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Wendy Liang <jliang@xilinx.com>
Subject: [PATCH 0/7] Add Xilinx ZynqMP R5 remoteproc driver
Date: Thu, 16 Aug 2018 00:06:23 -0700 [thread overview]
Message-ID: <1534403190-28523-1-git-send-email-jliang@xilinx.com> (raw)
There are Cortex-R5 processors on Xilinx ZynqMP UltraScale+
MPSoC.
This patch is to add an Xilinx ZynqMP R5 remoteproc driver to
enable Linux kernel to bringup R5, and enable communication
between Linux kernel and R5.
This patch series is based on top of Xilinx firmware patch set:
https://patchwork.kernel.org/cover/10555405/
Wendy Liang (7):
firmware: xlnx-zynqmp: Add RPU ioctl enums
firmware: xlnx-zynqmp: Add request ack enums
firmware: xilinx-zynqmp: Add request access capability macro
firmware: xlnx-zynqmp: Add request/release node
firmware: xlnx-zynqmp: Add shutdown/wakeup request
remoteproc: Add Xilinx ZynqMP R5 remoteproc
Documentation: devicetree: Add Xilinx R5 rproc binding
.../remoteproc/xlnx,zynqmp-r5-remoteproc.txt | 81 +++
drivers/firmware/xilinx/zynqmp.c | 65 ++
drivers/remoteproc/Kconfig | 9 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/zynqmp_r5_remoteproc.c | 692 +++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 43 ++
6 files changed, 891 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5-remoteproc.txt
create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: wendy.liang@xilinx.com (Wendy Liang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/7] Add Xilinx ZynqMP R5 remoteproc driver
Date: Thu, 16 Aug 2018 00:06:23 -0700 [thread overview]
Message-ID: <1534403190-28523-1-git-send-email-jliang@xilinx.com> (raw)
There are Cortex-R5 processors on Xilinx ZynqMP UltraScale+
MPSoC.
This patch is to add an Xilinx ZynqMP R5 remoteproc driver to
enable Linux kernel to bringup R5, and enable communication
between Linux kernel and R5.
This patch series is based on top of Xilinx firmware patch set:
https://patchwork.kernel.org/cover/10555405/
Wendy Liang (7):
firmware: xlnx-zynqmp: Add RPU ioctl enums
firmware: xlnx-zynqmp: Add request ack enums
firmware: xilinx-zynqmp: Add request access capability macro
firmware: xlnx-zynqmp: Add request/release node
firmware: xlnx-zynqmp: Add shutdown/wakeup request
remoteproc: Add Xilinx ZynqMP R5 remoteproc
Documentation: devicetree: Add Xilinx R5 rproc binding
.../remoteproc/xlnx,zynqmp-r5-remoteproc.txt | 81 +++
drivers/firmware/xilinx/zynqmp.c | 65 ++
drivers/remoteproc/Kconfig | 9 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/zynqmp_r5_remoteproc.c | 692 +++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 43 ++
6 files changed, 891 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5-remoteproc.txt
create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c
--
2.7.4
next reply other threads:[~2018-08-16 7:06 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-16 7:06 Wendy Liang [this message]
2018-08-16 7:06 ` [PATCH 0/7] Add Xilinx ZynqMP R5 remoteproc driver Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` [PATCH 1/7] firmware: xlnx-zynqmp: Add RPU ioctl enums Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` [PATCH 2/7] firmware: xlnx-zynqmp: Add request ack enums Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` [PATCH 3/7] firmware: xilinx-zynqmp: Add request access capability macro Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` [PATCH 4/7] firmware: xlnx-zynqmp: Add request/release node Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` [PATCH 5/7] firmware: xlnx-zynqmp: Add shutdown/wakeup request Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` [PATCH 6/7] remoteproc: Add Xilinx ZynqMP R5 remoteproc Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-24 16:26 ` Wendy Liang
2018-08-24 16:26 ` Wendy Liang
2018-09-10 17:16 ` Wendy Liang
2018-09-10 17:16 ` Wendy Liang
2018-09-10 20:24 ` Loic PALLARDY
2018-09-10 20:24 ` Loic PALLARDY
2018-09-10 20:24 ` Loic PALLARDY
2018-09-10 22:09 ` Jiaying Liang
2018-09-10 22:09 ` Jiaying Liang
2018-09-10 22:09 ` Jiaying Liang
2018-09-10 22:09 ` Jiaying Liang
2018-09-11 7:30 ` Loic PALLARDY
2018-09-11 7:30 ` Loic PALLARDY
2018-09-11 7:30 ` Loic PALLARDY
2018-10-06 5:44 ` Bjorn Andersson
2018-10-06 5:44 ` Bjorn Andersson
2018-08-16 7:06 ` [PATCH 7/7] Documentation: devicetree: Add Xilinx R5 rproc binding Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-16 7:06 ` Wendy Liang
2018-08-17 15:09 ` Rob Herring
2018-08-17 15:09 ` Rob Herring
2018-08-20 5:54 ` Wendy Liang
2018-08-20 5:54 ` Wendy Liang
2018-08-17 16:31 ` Moritz Fischer
2018-08-17 16:31 ` Moritz Fischer
2018-08-20 5:55 ` Wendy Liang
2018-08-20 5:55 ` Wendy Liang
2018-10-06 5:50 ` Bjorn Andersson
2018-10-06 5:50 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1534403190-28523-1-git-send-email-jliang@xilinx.com \
--to=wendy.liang@xilinx.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jliang@xilinx.com \
--cc=jollys@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michal.simek@xilinx.com \
--cc=ohad@wizery.com \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.