From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: laurent.pinchart@ideasonboard.com, geert@linux-m68k.org,
horms@verge.net.au
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
kieran.bingham+renesas@ideasonboard.com,
niklas.soderlund+renesas@ragnatech.se,
damm+renesas@opensource.se, ulrich.hecht+renesas@gmail.com,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH/RFT v2 0/8] arm64: dts: renesas: Ebisu: Add HDMI and CVBS input
Date: Wed, 5 Sep 2018 17:29:37 +0200 [thread overview]
Message-ID: <1536161385-25562-1-git-send-email-jacopo+renesas@jmondi.org> (raw)
Hello renesas list,
this series add supports for the HDMI and CVBS input to R-Car E3 R8A77990
Ebisu board.
It's an RFT, as I don't have an Ebisu to test with :(
The series adds supports for the following items:
- PFC: add VIN groups and functions
- R-Car VIN and R-Car CSI-2: add support for R8A77990
- R8A77990: Add I2C, VIN and CSI-2 nodes (v1 re-sent by Laurent in D3 DU series)
- Ebisu: describe HDMI and CVBS inputs
Laurent has tested v1 and confirmed that the current mainline implementation
of the adv748x driver does not work in the configuration used by the Ebisu
board.
This series should then be applied on top of the just sent:
[PATCH v2 0/5] media: adv748x: Allow probe with a single output endpoint
To allow the adv7482 to probe with a single output port enabled.
This series, based on v4.19-rc2 with adv748x series on top, is available at:
git://jmondi.org/linux ebisu/linus-master/hdmi_cvbs_v2
Thanks
j
Jacopo Mondi (6):
media: dt-bindings: rcar-vin: Add R8A77990 support
media: rcar-vin: Add support for R-Car R8A77990
media: dt-bindings: rcar-csi2: Add R8A77990
media: rcar-csi2: Add R8A77990 support
pinctrl: sh-pfc: r8a77990: Add VIN pins, groups and functions
arm64: dts: renesas: ebisu: Add HDMI and CVBS input
Koji Matsuoka (1):
arm64: dts: r8a77990: Add VIN and CSI-2 device nodes
Takeshi Kihara (1):
arm64: dts: r8a77990: Add I2C device nodes
.../devicetree/bindings/media/rcar_vin.txt | 1 +
.../bindings/media/renesas,rcar-csi2.txt | 1 +
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 86 +++++++
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 202 +++++++++++++++++
drivers/media/platform/rcar-vin/rcar-core.c | 20 ++
drivers/media/platform/rcar-vin/rcar-csi2.c | 9 +
drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 250 +++++++++++++++++++++
7 files changed, 569 insertions(+)
--
2.7.4
next reply other threads:[~2018-09-05 20:00 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-05 15:29 Jacopo Mondi [this message]
2018-09-05 15:29 ` [PATCH v2 1/8] media: dt-bindings: rcar-vin: Add R8A77990 support Jacopo Mondi
2018-09-10 12:42 ` Simon Horman
2018-09-10 13:58 ` Laurent Pinchart
2018-09-10 18:15 ` Niklas Söderlund
2018-09-05 15:29 ` [PATCH v2 2/8] media: rcar-vin: Add support for R-Car R8A77990 Jacopo Mondi
2018-09-10 14:02 ` Laurent Pinchart
2018-09-10 18:18 ` Niklas Söderlund
2018-09-05 15:29 ` [PATCH v2 3/8] media: dt-bindings: rcar-csi2: Add R8A77990 Jacopo Mondi
2018-09-10 12:45 ` Simon Horman
2018-09-10 14:04 ` Laurent Pinchart
2018-09-10 18:19 ` Niklas Söderlund
2018-09-05 15:29 ` [PATCH v2 4/8] media: rcar-csi2: Add R8A77990 support Jacopo Mondi
2018-09-10 14:05 ` Laurent Pinchart
2018-09-10 18:20 ` Niklas Söderlund
2018-09-05 15:29 ` [PATCH v2 5/8] pinctrl: sh-pfc: r8a77990: Add VIN pins, groups and functions Jacopo Mondi
2018-09-10 13:01 ` Simon Horman
2018-09-11 7:44 ` jacopo mondi
2018-09-11 8:15 ` Geert Uytterhoeven
2018-09-11 8:54 ` jacopo mondi
2018-09-11 9:44 ` jacopo mondi
2018-09-28 7:46 ` jacopo mondi
2018-10-02 9:25 ` Geert Uytterhoeven
2018-10-19 16:55 ` jacopo mondi
2018-10-20 19:04 ` Geert Uytterhoeven
2018-09-05 15:29 ` [PATCH v2 6/8] arm64: dts: r8a77990: Add VIN and CSI-2 device nodes Jacopo Mondi
2018-09-06 9:10 ` Simon Horman
2018-09-06 9:16 ` Simon Horman
2018-09-10 14:12 ` Laurent Pinchart
2018-09-17 14:37 ` Laurent Pinchart
2018-10-30 10:14 ` jacopo mondi
2018-10-30 12:57 ` Laurent Pinchart
2018-10-31 12:48 ` Simon Horman
2018-10-31 13:18 ` jacopo mondi
2018-10-31 14:37 ` Simon Horman
2018-11-05 10:32 ` jacopo mondi
2018-11-06 14:02 ` Simon Horman
2018-09-05 15:29 ` [PATCH v2 7/8] arm64: dts: r8a77990: Add I2C " Jacopo Mondi
2018-09-05 16:12 ` Laurent Pinchart
2018-09-06 9:12 ` Simon Horman
2018-09-05 15:29 ` [PATCH v2 8/8] arm64: dts: renesas: ebisu: Add HDMI and CVBS input Jacopo Mondi
2018-09-10 14:21 ` Laurent Pinchart
2018-09-12 9:29 ` Simon Horman
2018-09-12 11:08 ` jacopo mondi
2018-09-17 7:09 ` Simon Horman
2018-09-17 15:22 ` [PATCH/RFT v2 0/8] arm64: dts: renesas: Ebisu: " Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1536161385-25562-1-git-send-email-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=damm+renesas@opensource.se \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=ulrich.hecht+renesas@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.