From: Jolly Shah <jolly.shah@xilinx.com>
To: <matthias.bgg@gmail.com>, <andy.gross@linaro.org>,
<shawnguo@kernel.org>, <geert+renesas@glider.be>,
<bjorn.andersson@linaro.org>, <sean.wang@mediatek.com>,
<m.szyprowski@samsung.com>, <michal.simek@xilinx.com>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>
Cc: <rajanv@xilinx.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Rajan Vaja <rajan.vaja@xilinx.com>,
Jolly Shah <jollys@xilinx.com>
Subject: [PATCH v3 1/3] dt-bindings: soc: Add ZynqMP PM bindings
Date: Tue, 11 Sep 2018 14:34:55 -0700 [thread overview]
Message-ID: <1536701697-23949-2-git-send-email-jollys@xilinx.com> (raw)
In-Reply-To: <1536701697-23949-1-git-send-email-jollys@xilinx.com>
From: Rajan Vaja <rajan.vaja@xilinx.com>
Add documentation to describe Xilinx ZynqMP power management
bindings.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
.../bindings/power/reset/xlnx,zynqmp-power.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
new file mode 100644
index 0000000..925d17d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
@@ -0,0 +1,22 @@
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible: Must contain: "xlnx,zynqmp-power"
+ - interrupts: Interrupt specifier
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupts = <0 35 4>;
+ };
+ };
+};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Jolly Shah <jolly.shah@xilinx.com>
To: matthias.bgg@gmail.com, andy.gross@linaro.org,
shawnguo@kernel.org, geert+renesas@glider.be,
bjorn.andersson@linaro.org, sean.wang@mediatek.com,
m.szyprowski@samsung.com, michal.simek@xilinx.com,
robh+dt@kernel.org, mark.rutland@arm.com
Cc: rajanv@xilinx.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Rajan Vaja <rajan.vaja@xilinx.com>,
Jolly Shah <jollys@xilinx.com>
Subject: [PATCH v3 1/3] dt-bindings: soc: Add ZynqMP PM bindings
Date: Tue, 11 Sep 2018 14:34:55 -0700 [thread overview]
Message-ID: <1536701697-23949-2-git-send-email-jollys@xilinx.com> (raw)
In-Reply-To: <1536701697-23949-1-git-send-email-jollys@xilinx.com>
From: Rajan Vaja <rajan.vaja@xilinx.com>
Add documentation to describe Xilinx ZynqMP power management
bindings.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
.../bindings/power/reset/xlnx,zynqmp-power.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
new file mode 100644
index 0000000..925d17d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
@@ -0,0 +1,22 @@
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible: Must contain: "xlnx,zynqmp-power"
+ - interrupts: Interrupt specifier
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupts = <0 35 4>;
+ };
+ };
+};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: jolly.shah@xilinx.com (Jolly Shah)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/3] dt-bindings: soc: Add ZynqMP PM bindings
Date: Tue, 11 Sep 2018 14:34:55 -0700 [thread overview]
Message-ID: <1536701697-23949-2-git-send-email-jollys@xilinx.com> (raw)
In-Reply-To: <1536701697-23949-1-git-send-email-jollys@xilinx.com>
From: Rajan Vaja <rajan.vaja@xilinx.com>
Add documentation to describe Xilinx ZynqMP power management
bindings.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
.../bindings/power/reset/xlnx,zynqmp-power.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
new file mode 100644
index 0000000..925d17d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
@@ -0,0 +1,22 @@
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible: Must contain: "xlnx,zynqmp-power"
+ - interrupts: Interrupt specifier
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupts = <0 35 4>;
+ };
+ };
+};
--
2.7.4
next prev parent reply other threads:[~2018-09-11 21:35 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-11 21:34 [PATCH v3 0/3] drivers: soc: xilinx: Add support for ZynqMP PM driver Jolly Shah
2018-09-11 21:34 ` Jolly Shah
2018-09-11 21:34 ` Jolly Shah
2018-09-11 21:34 ` Jolly Shah [this message]
2018-09-11 21:34 ` [PATCH v3 1/3] dt-bindings: soc: Add ZynqMP PM bindings Jolly Shah
2018-09-11 21:34 ` Jolly Shah
2018-09-11 21:34 ` [PATCH v3 2/3] firmware: xilinx: Implement ZynqMP power management APIs Jolly Shah
2018-09-11 21:34 ` Jolly Shah
2018-09-11 21:34 ` Jolly Shah
2018-09-11 21:34 ` [PATCH v3 3/3] drivers: soc: xilinx: Add ZynqMP PM driver Jolly Shah
2018-09-11 21:34 ` Jolly Shah
2018-09-11 21:34 ` Jolly Shah
2018-09-12 1:10 ` Ahmed S. Darwish
2018-09-12 1:10 ` Ahmed S. Darwish
2018-09-13 17:11 ` Jolly Shah
2018-09-13 17:11 ` Jolly Shah
2018-09-13 17:11 ` Jolly Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1536701697-23949-2-git-send-email-jollys@xilinx.com \
--to=jolly.shah@xilinx.com \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=jollys@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=michal.simek@xilinx.com \
--cc=rajan.vaja@xilinx.com \
--cc=rajanv@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.