* [U-Boot] [PATCH v2 0/2] Neutis N5 support
@ 2018-10-04 12:39 Aleksandr Aleksandrov
2018-10-04 12:39 ` [U-Boot] [PATCH v2 1/2] arm: new board - Emlid " Aleksandr Aleksandrov
2018-10-04 12:39 ` [U-Boot] [PATCH v2 2/2] sunxi MAINTAINERS: add new entry for Emlid Neutis N5 Aleksandr Aleksandrov
0 siblings, 2 replies; 5+ messages in thread
From: Aleksandr Aleksandrov @ 2018-10-04 12:39 UTC (permalink / raw)
To: u-boot
This series of pathes addes Neutis N5 support.
Emlid Neutis N5 is a SoM based on Allwinner H5.
1st patch includes device tree file and defconfig for
Dev board and dtsi file for SoM needs.
Changes from v1 (4 oct 2018): add to maintainers myself and
separate dts file: dtsi for SoM and motherboard dts file that
inlcudes dtsi file.
Aleksandr Aleksandrov (2):
arm: new board - Emlid Neutis N5 support
sunxi MAINTAINERS: add new entry for Emlid Neutis N5
arch/arm/dts/Makefile | 3 +-
.../arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts | 73 ++++++++++++++++++++++
arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi | 66 +++++++++++++++++++
board/sunxi/MAINTAINERS | 5 ++
configs/emlid_neutis_n5_devboard_defconfig | 13 ++++
5 files changed, 159 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts
create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi
create mode 100644 configs/emlid_neutis_n5_devboard_defconfig
--
2.7.4
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v2 1/2] arm: new board - Emlid Neutis N5 support
2018-10-04 12:39 [U-Boot] [PATCH v2 0/2] Neutis N5 support Aleksandr Aleksandrov
@ 2018-10-04 12:39 ` Aleksandr Aleksandrov
2018-10-04 12:52 ` Maxime Ripard
2018-10-04 12:39 ` [U-Boot] [PATCH v2 2/2] sunxi MAINTAINERS: add new entry for Emlid Neutis N5 Aleksandr Aleksandrov
1 sibling, 1 reply; 5+ messages in thread
From: Aleksandr Aleksandrov @ 2018-10-04 12:39 UTC (permalink / raw)
To: u-boot
Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT
module, DDR3 RAM and eMMC.
- add neutis-devboard target to dtb makefile
- add dtsi file for Neutis N5 needs
- add config file for Neutis N5 Dev board
Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
---
arch/arm/dts/Makefile | 3 +-
.../arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts | 73 ++++++++++++++++++++++
arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi | 66 +++++++++++++++++++
configs/emlid_neutis_n5_devboard_defconfig | 13 ++++
4 files changed, 154 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts
create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi
create mode 100644 configs/emlid_neutis_n5_devboard_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 44ebc50..639cbaf 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -391,7 +391,8 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-orangepi-zero-plus.dtb \
sun50i-h5-orangepi-pc2.dtb \
sun50i-h5-orangepi-prime.dtb \
- sun50i-h5-orangepi-zero-plus2.dtb
+ sun50i-h5-orangepi-zero-plus2.dtb \
+ sun50i-h5-emlid-neutis-n5-devboard.dtb
dtb-$(CONFIG_MACH_SUN50I_H6) += \
sun50i-h6-orangepi-one-plus.dtb \
sun50i-h6-pine-h64.dtb
diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts
new file mode 100644
index 0000000..4b04d4c
--- /dev/null
+++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -0,0 +1,73 @@
+/*s
+ * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5-emlid-neutis-n5.dtsi"
+
+/ {
+ model = "Emlid Neutis N5 Developer board";
+ compatible = "emlid,emlid-neutis-n5-devboard",
+ "emlid,emlid-neutis-n5",
+ "allwinner,sun50i-h5";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi
new file mode 100644
index 0000000..65468a3
--- /dev/null
+++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi
@@ -0,0 +1,66 @@
+/*s
+ * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
diff --git a/configs/emlid_neutis_n5_devboard_defconfig b/configs/emlid_neutis_n5_devboard_defconfig
new file mode 100644
index 0000000..3df0ca1
--- /dev/null
+++ b/configs/emlid_neutis_n5_devboard_defconfig
@@ -0,0 +1,13 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H5=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_ZQ=3881977
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-emlid-neutis-n5-devboard"
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v2 2/2] sunxi MAINTAINERS: add new entry for Emlid Neutis N5
2018-10-04 12:39 [U-Boot] [PATCH v2 0/2] Neutis N5 support Aleksandr Aleksandrov
2018-10-04 12:39 ` [U-Boot] [PATCH v2 1/2] arm: new board - Emlid " Aleksandr Aleksandrov
@ 2018-10-04 12:39 ` Aleksandr Aleksandrov
1 sibling, 0 replies; 5+ messages in thread
From: Aleksandr Aleksandrov @ 2018-10-04 12:39 UTC (permalink / raw)
To: u-boot
Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
---
board/sunxi/MAINTAINERS | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 2f95976..ad7d660 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -177,6 +177,11 @@ M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Cubietruck_plus_defconfig
+EMLID NEUTIS N5 DEV BOARD
+M: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+S: Maintained
+F: configs/emlid_neutis_n5_devboard_defconfig
+
GEMEI-G9 TABLET
M: Priit Laes <plaes@plaes.org>
S: Maintained
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v2 1/2] arm: new board - Emlid Neutis N5 support
2018-10-04 12:39 ` [U-Boot] [PATCH v2 1/2] arm: new board - Emlid " Aleksandr Aleksandrov
@ 2018-10-04 12:52 ` Maxime Ripard
[not found] ` <1234271538661713@iva4-f779e14fe728.qloud-c.yandex.net>
0 siblings, 1 reply; 5+ messages in thread
From: Maxime Ripard @ 2018-10-04 12:52 UTC (permalink / raw)
To: u-boot
Hi Alexsandr,
You should put Jagan and me in Cc, we're the one that are going to
merge your patches.
On Thu, Oct 04, 2018 at 03:39:33PM +0300, Aleksandr Aleksandrov wrote:
> Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT
> module, DDR3 RAM and eMMC.
>
> - add neutis-devboard target to dtb makefile
> - add dtsi file for Neutis N5 needs
> - add config file for Neutis N5 Dev board
>
> Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
> ---
> arch/arm/dts/Makefile | 3 +-
> .../arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts | 73 ++++++++++++++++++++++
> arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi | 66 +++++++++++++++++++
> configs/emlid_neutis_n5_devboard_defconfig | 13 ++++
> 4 files changed, 154 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts
> create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi
> create mode 100644 configs/emlid_neutis_n5_devboard_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 44ebc50..639cbaf 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -391,7 +391,8 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
> sun50i-h5-orangepi-zero-plus.dtb \
> sun50i-h5-orangepi-pc2.dtb \
> sun50i-h5-orangepi-prime.dtb \
> - sun50i-h5-orangepi-zero-plus2.dtb
> + sun50i-h5-orangepi-zero-plus2.dtb \
> + sun50i-h5-emlid-neutis-n5-devboard.dtb
This should be ordered alphabetically.
> dtb-$(CONFIG_MACH_SUN50I_H6) += \
> sun50i-h6-orangepi-one-plus.dtb \
> sun50i-h6-pine-h64.dtb
> diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts
> new file mode 100644
> index 0000000..4b04d4c
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts
> @@ -0,0 +1,73 @@
> +/*s
> + * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h5-emlid-neutis-n5.dtsi"
> +
> +/ {
> + model = "Emlid Neutis N5 Developer board";
> + compatible = "emlid,emlid-neutis-n5-devboard",
> + "emlid,emlid-neutis-n5",
> + "allwinner,sun50i-h5";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&mmc0 {
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_a>;
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi
> new file mode 100644
> index 0000000..65468a3
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi
> @@ -0,0 +1,66 @@
> +/*s
> + * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h5.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&mmc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc2_8bit_pins>;
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <8>;
> + non-removable;
> + cap-mmc-hw-reset;
> + status = "okay";
> +};
You should use the same DT than in Linux here
Thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181004/d28f6ead/attachment.sig>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH v2 1/2] arm: new board - Emlid Neutis N5 support
[not found] ` <1234271538661713@iva4-f779e14fe728.qloud-c.yandex.net>
@ 2018-10-04 16:32 ` Maxime Ripard
0 siblings, 0 replies; 5+ messages in thread
From: Maxime Ripard @ 2018-10-04 16:32 UTC (permalink / raw)
To: u-boot
Hi!
On Thu, Oct 04, 2018 at 05:01:53PM +0300, aleksandr.aleksandrov at emlid.com wrote:
> Hi Maxime,
> Â
> Thanks for your feedback!
One additional thing, please keep all the recipients in cc when you
answer :)
> I will update all you said, but I have a question.
> I have to copy DT files from linux to u-boot literaly, right?
Yep
> For example, 100-eth doesn't work and WiFi I guess too or all DT
> stuff should work in U-boot?
Wifi isn't supported at all in U-Boot, so nothing is going to use that
node.
Ethernet should work though
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-10-04 16:32 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-04 12:39 [U-Boot] [PATCH v2 0/2] Neutis N5 support Aleksandr Aleksandrov
2018-10-04 12:39 ` [U-Boot] [PATCH v2 1/2] arm: new board - Emlid " Aleksandr Aleksandrov
2018-10-04 12:52 ` Maxime Ripard
[not found] ` <1234271538661713@iva4-f779e14fe728.qloud-c.yandex.net>
2018-10-04 16:32 ` Maxime Ripard
2018-10-04 12:39 ` [U-Boot] [PATCH v2 2/2] sunxi MAINTAINERS: add new entry for Emlid Neutis N5 Aleksandr Aleksandrov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.