From: Jolly Shah <jolly.shah@xilinx.com> To: <olof@lixom.net>, <mturquette@baylibre.com>, <sboyd@codeaurora.org>, <michal.simek@xilinx.com>, <arm@kernel.org>, <linux-clk@vger.kernel.org> Cc: <rajanv@xilinx.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Jolly Shah <jollys@xilinx.com> Subject: [PATCH v6 0/4] drivers: clk: Add ZynqMP clock driver support Date: Mon, 8 Oct 2018 11:21:42 -0700 [thread overview] Message-ID: <1539022906-18073-1-git-send-email-jollys@xilinx.com> (raw) This patchset adds CCF compliant clock driver for ZynqMP.Clock driver queries supported clock information from firmware and regiters pll and output clocks with CCF. This patch series is earlier reveiwed as part of FW patchset (https://patchwork.kernel.org/cover/10555405/). FW driver from that patchset is merged. This patchset contains only clock driver and is based on top of xilinx firmware patch set available in below tree: https://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git/log/?h=next/drivers v6: - Updated eemi return payload type to be u32 instead of le32 and Eemi ops in FW driver will be updated to take care of endianess - Added Stephen's review tag v5: - Added "Acked-by: Olof Johansson <olof@lixom.net>" for patches v4: - Fixed minor review comments received for v3 patchset v3: - Added check to pass only valid ioctls for ioctl eemi api - Added eemi documentation including ioctl details Jolly Shah (1): drivers: clk: Add ZynqMP clock driver Rajan Vaja (3): Documentation: xilinx: Add documentation for eemi APIs firmware: xilinx: Add zynqmp IOCTL API for device control dt-bindings: clock: Add bindings for ZynqMP clock driver .../firmware/xilinx/xlnx,zynqmp-firmware.txt | 53 ++ Documentation/xilinx/eemi.txt | 67 ++ drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/zynqmp/Kconfig | 10 + drivers/clk/zynqmp/Makefile | 4 + drivers/clk/zynqmp/clk-gate-zynqmp.c | 144 +++++ drivers/clk/zynqmp/clk-mux-zynqmp.c | 141 ++++ drivers/clk/zynqmp/clk-zynqmp.h | 68 ++ drivers/clk/zynqmp/clkc.c | 716 +++++++++++++++++++++ drivers/clk/zynqmp/divider.c | 217 +++++++ drivers/clk/zynqmp/pll.c | 335 ++++++++++ drivers/firmware/xilinx/zynqmp.c | 42 ++ include/dt-bindings/clock/xlnx,zynqmp-clk.h | 116 ++++ include/linux/firmware/xlnx-zynqmp.h | 5 +- 15 files changed, 1919 insertions(+), 1 deletion(-) create mode 100644 Documentation/xilinx/eemi.txt create mode 100644 drivers/clk/zynqmp/Kconfig create mode 100644 drivers/clk/zynqmp/Makefile create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h create mode 100644 drivers/clk/zynqmp/clkc.c create mode 100644 drivers/clk/zynqmp/divider.c create mode 100644 drivers/clk/zynqmp/pll.c create mode 100644 include/dt-bindings/clock/xlnx,zynqmp-clk.h -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: jolly.shah@xilinx.com (Jolly Shah) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 0/4] drivers: clk: Add ZynqMP clock driver support Date: Mon, 8 Oct 2018 11:21:42 -0700 [thread overview] Message-ID: <1539022906-18073-1-git-send-email-jollys@xilinx.com> (raw) This patchset adds CCF compliant clock driver for ZynqMP.Clock driver queries supported clock information from firmware and regiters pll and output clocks with CCF. This patch series is earlier reveiwed as part of FW patchset (https://patchwork.kernel.org/cover/10555405/). FW driver from that patchset is merged. This patchset contains only clock driver and is based on top of xilinx firmware patch set available in below tree: https://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git/log/?h=next/drivers v6: - Updated eemi return payload type to be u32 instead of le32 and Eemi ops in FW driver will be updated to take care of endianess - Added Stephen's review tag v5: - Added "Acked-by: Olof Johansson <olof@lixom.net>" for patches v4: - Fixed minor review comments received for v3 patchset v3: - Added check to pass only valid ioctls for ioctl eemi api - Added eemi documentation including ioctl details Jolly Shah (1): drivers: clk: Add ZynqMP clock driver Rajan Vaja (3): Documentation: xilinx: Add documentation for eemi APIs firmware: xilinx: Add zynqmp IOCTL API for device control dt-bindings: clock: Add bindings for ZynqMP clock driver .../firmware/xilinx/xlnx,zynqmp-firmware.txt | 53 ++ Documentation/xilinx/eemi.txt | 67 ++ drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/zynqmp/Kconfig | 10 + drivers/clk/zynqmp/Makefile | 4 + drivers/clk/zynqmp/clk-gate-zynqmp.c | 144 +++++ drivers/clk/zynqmp/clk-mux-zynqmp.c | 141 ++++ drivers/clk/zynqmp/clk-zynqmp.h | 68 ++ drivers/clk/zynqmp/clkc.c | 716 +++++++++++++++++++++ drivers/clk/zynqmp/divider.c | 217 +++++++ drivers/clk/zynqmp/pll.c | 335 ++++++++++ drivers/firmware/xilinx/zynqmp.c | 42 ++ include/dt-bindings/clock/xlnx,zynqmp-clk.h | 116 ++++ include/linux/firmware/xlnx-zynqmp.h | 5 +- 15 files changed, 1919 insertions(+), 1 deletion(-) create mode 100644 Documentation/xilinx/eemi.txt create mode 100644 drivers/clk/zynqmp/Kconfig create mode 100644 drivers/clk/zynqmp/Makefile create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h create mode 100644 drivers/clk/zynqmp/clkc.c create mode 100644 drivers/clk/zynqmp/divider.c create mode 100644 drivers/clk/zynqmp/pll.c create mode 100644 include/dt-bindings/clock/xlnx,zynqmp-clk.h -- 2.7.4
next reply other threads:[~2018-10-08 18:22 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-08 18:21 Jolly Shah [this message] 2018-10-08 18:21 ` [PATCH v6 0/4] drivers: clk: Add ZynqMP clock driver support Jolly Shah 2018-10-08 18:21 ` [PATCH v6 1/4] Documentation: xilinx: Add documentation for eemi APIs Jolly Shah 2018-10-08 18:21 ` Jolly Shah 2018-10-08 18:21 ` [PATCH v6 2/4] firmware: xilinx: Add zynqmp IOCTL API for device control Jolly Shah 2018-10-08 18:21 ` Jolly Shah 2018-10-08 18:21 ` [PATCH v6 3/4] dt-bindings: clock: Add bindings for ZynqMP clock driver Jolly Shah 2018-10-08 18:21 ` Jolly Shah 2018-10-08 18:21 ` [PATCH v6 4/4] drivers: clk: Add " Jolly Shah 2018-10-08 18:21 ` Jolly Shah 2018-10-09 11:29 ` [PATCH v6 0/4] drivers: clk: Add ZynqMP clock driver support Michal Simek 2018-10-09 11:29 ` Michal Simek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1539022906-18073-1-git-send-email-jollys@xilinx.com \ --to=jolly.shah@xilinx.com \ --cc=arm@kernel.org \ --cc=jollys@xilinx.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=michal.simek@xilinx.com \ --cc=mturquette@baylibre.com \ --cc=olof@lixom.net \ --cc=rajanv@xilinx.com \ --cc=sboyd@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.