From: Manish Narani <manish.narani@xilinx.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
<michal.simek@xilinx.com>, <bp@alien8.de>, <mchehab@kernel.org>,
<manish.narani@xilinx.com>, <amit.kucheria@linaro.org>,
<sudeep.holla@arm.com>, <leoyang.li@nxp.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-edac@vger.kernel.org>
Subject: [PATCH v10 3/6] edac: synopsys: Add macro defines for ZynqMP DDRC
Date: Thu, 25 Oct 2018 11:36:58 +0530 [thread overview]
Message-ID: <1540447621-22870-4-git-send-email-manish.narani@xilinx.com> (raw)
In-Reply-To: <1540447621-22870-1-git-send-email-manish.narani@xilinx.com>
Add macro defines for ZynqMP DDR controller. These macros will be used
for ZynqMP ECC operations.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
drivers/edac/synopsys_edac.c | 168 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 168 insertions(+)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 0005ef3..d1999e0 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -97,6 +97,174 @@
#define SCRUB_MODE_MASK 0x7
#define SCRUB_MODE_SECDED 0x4
+/* DDR ECC Quirks */
+#define DDR_ECC_INTR_SUPPORT BIT(0)
+#define DDR_ECC_DATA_POISON_SUPPORT BIT(1)
+
+/* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
+/* ECC Configuration Registers */
+#define ECC_CFG0_OFST 0x70
+#define ECC_CFG1_OFST 0x74
+
+/* ECC Status Register */
+#define ECC_STAT_OFST 0x78
+
+/* ECC Clear Register */
+#define ECC_CLR_OFST 0x7C
+
+/* ECC Error count Register */
+#define ECC_ERRCNT_OFST 0x80
+
+/* ECC Corrected Error Address Register */
+#define ECC_CEADDR0_OFST 0x84
+#define ECC_CEADDR1_OFST 0x88
+
+/* ECC Syndrome Registers */
+#define ECC_CSYND0_OFST 0x8C
+#define ECC_CSYND1_OFST 0x90
+#define ECC_CSYND2_OFST 0x94
+
+/* ECC Bit Mask0 Address Register */
+#define ECC_BITMASK0_OFST 0x98
+#define ECC_BITMASK1_OFST 0x9C
+#define ECC_BITMASK2_OFST 0xA0
+
+/* ECC UnCorrected Error Address Register */
+#define ECC_UEADDR0_OFST 0xA4
+#define ECC_UEADDR1_OFST 0xA8
+
+/* ECC Syndrome Registers */
+#define ECC_UESYND0_OFST 0xAC
+#define ECC_UESYND1_OFST 0xB0
+#define ECC_UESYND2_OFST 0xB4
+
+/* ECC Poison Address Reg */
+#define ECC_POISON0_OFST 0xB8
+#define ECC_POISON1_OFST 0xBC
+
+#define ECC_ADDRMAP0_OFFSET 0x200
+
+/* Control register bitfield definitions */
+#define ECC_CTRL_BUSWIDTH_MASK 0x3000
+#define ECC_CTRL_BUSWIDTH_SHIFT 12
+#define ECC_CTRL_CLR_CE_ERRCNT BIT(2)
+#define ECC_CTRL_CLR_UE_ERRCNT BIT(3)
+
+/* DDR Control Register width definitions */
+#define DDRCTL_EWDTH_16 2
+#define DDRCTL_EWDTH_32 1
+#define DDRCTL_EWDTH_64 0
+
+/* ECC status register definitions */
+#define ECC_STAT_UECNT_MASK 0xF0000
+#define ECC_STAT_UECNT_SHIFT 16
+#define ECC_STAT_CECNT_MASK 0xF00
+#define ECC_STAT_CECNT_SHIFT 8
+#define ECC_STAT_BITNUM_MASK 0x7F
+
+/* DDR QOS Interrupt register definitions */
+#define DDR_QOS_IRQ_STAT_OFST 0x20200
+#define DDR_QOSUE_MASK 0x4
+#define DDR_QOSCE_MASK 0x2
+#define ECC_CE_UE_INTR_MASK 0x6
+#define DDR_QOS_IRQ_EN_OFST 0x20208
+#define DDR_QOS_IRQ_DB_OFST 0x2020C
+
+/* ECC Corrected Error Register Mask and Shifts*/
+#define ECC_CEADDR0_RW_MASK 0x3FFFF
+#define ECC_CEADDR0_RNK_MASK BIT(24)
+#define ECC_CEADDR1_BNKGRP_MASK 0x3000000
+#define ECC_CEADDR1_BNKNR_MASK 0x70000
+#define ECC_CEADDR1_BLKNR_MASK 0xFFF
+#define ECC_CEADDR1_BNKGRP_SHIFT 24
+#define ECC_CEADDR1_BNKNR_SHIFT 16
+
+/* ECC Poison register shifts */
+#define ECC_POISON0_RANK_SHIFT 24
+#define ECC_POISON0_RANK_MASK BIT(24)
+#define ECC_POISON0_COLUMN_SHIFT 0
+#define ECC_POISON0_COLUMN_MASK 0xFFF
+#define ECC_POISON1_BG_SHIFT 28
+#define ECC_POISON1_BG_MASK 0x30000000
+#define ECC_POISON1_BANKNR_SHIFT 24
+#define ECC_POISON1_BANKNR_MASK 0x7000000
+#define ECC_POISON1_ROW_SHIFT 0
+#define ECC_POISON1_ROW_MASK 0x3FFFF
+
+/* DDR Memory type defines */
+#define MEM_TYPE_DDR3 0x1
+#define MEM_TYPE_LPDDR3 0x8
+#define MEM_TYPE_DDR2 0x4
+#define MEM_TYPE_DDR4 0x10
+#define MEM_TYPE_LPDDR4 0x20
+
+/* DDRC Software control register */
+#define DDRC_SWCTL 0x320
+
+/* DDRC ECC CE & UE poison mask */
+#define ECC_CEPOISON_MASK 0x3
+#define ECC_UEPOISON_MASK 0x1
+
+/* DDRC Device config masks */
+#define DDRC_MSTR_CFG_MASK 0xC0000000
+#define DDRC_MSTR_CFG_SHIFT 30
+#define DDRC_MSTR_CFG_X4_MASK 0x0
+#define DDRC_MSTR_CFG_X8_MASK 0x1
+#define DDRC_MSTR_CFG_X16_MASK 0x2
+#define DDRC_MSTR_CFG_X32_MASK 0x3
+
+#define DDR_MAX_ROW_SHIFT 18
+#define DDR_MAX_COL_SHIFT 14
+#define DDR_MAX_BANK_SHIFT 3
+#define DDR_MAX_BANKGRP_SHIFT 2
+
+#define ROW_MAX_VAL_MASK 0xF
+#define COL_MAX_VAL_MASK 0xF
+#define BANK_MAX_VAL_MASK 0x1F
+#define BANKGRP_MAX_VAL_MASK 0x1F
+#define RANK_MAX_VAL_MASK 0x1F
+
+#define ROW_B0_BASE 6
+#define ROW_B1_BASE 7
+#define ROW_B2_BASE 8
+#define ROW_B3_BASE 9
+#define ROW_B4_BASE 10
+#define ROW_B5_BASE 11
+#define ROW_B6_BASE 12
+#define ROW_B7_BASE 13
+#define ROW_B8_BASE 14
+#define ROW_B9_BASE 15
+#define ROW_B10_BASE 16
+#define ROW_B11_BASE 17
+#define ROW_B12_BASE 18
+#define ROW_B13_BASE 19
+#define ROW_B14_BASE 20
+#define ROW_B15_BASE 21
+#define ROW_B16_BASE 22
+#define ROW_B17_BASE 23
+
+#define COL_B2_BASE 2
+#define COL_B3_BASE 3
+#define COL_B4_BASE 4
+#define COL_B5_BASE 5
+#define COL_B6_BASE 6
+#define COL_B7_BASE 7
+#define COL_B8_BASE 8
+#define COL_B9_BASE 9
+#define COL_B10_BASE 10
+#define COL_B11_BASE 11
+#define COL_B12_BASE 12
+#define COL_B13_BASE 13
+
+#define BANK_B0_BASE 2
+#define BANK_B1_BASE 3
+#define BANK_B2_BASE 4
+
+#define BANKGRP_B0_BASE 2
+#define BANKGRP_B1_BASE 3
+
+#define RANK_B0_BASE 6
+
/**
* struct ecc_error_info - ECC error log information.
* @row: Row number.
--
2.1.1
WARNING: multiple messages have this Message-ID (diff)
From: Manish Narani <manish.narani@xilinx.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
michal.simek@xilinx.com, bp@alien8.de, mchehab@kernel.org,
manish.narani@xilinx.com, amit.kucheria@linaro.org,
sudeep.holla@arm.com, leoyang.li@nxp.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-edac@vger.kernel.org
Subject: [v10,3/6] edac: synopsys: Add macro defines for ZynqMP DDRC
Date: Thu, 25 Oct 2018 11:36:58 +0530 [thread overview]
Message-ID: <1540447621-22870-4-git-send-email-manish.narani@xilinx.com> (raw)
Add macro defines for ZynqMP DDR controller. These macros will be used
for ZynqMP ECC operations.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
drivers/edac/synopsys_edac.c | 168 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 168 insertions(+)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 0005ef3..d1999e0 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -97,6 +97,174 @@
#define SCRUB_MODE_MASK 0x7
#define SCRUB_MODE_SECDED 0x4
+/* DDR ECC Quirks */
+#define DDR_ECC_INTR_SUPPORT BIT(0)
+#define DDR_ECC_DATA_POISON_SUPPORT BIT(1)
+
+/* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
+/* ECC Configuration Registers */
+#define ECC_CFG0_OFST 0x70
+#define ECC_CFG1_OFST 0x74
+
+/* ECC Status Register */
+#define ECC_STAT_OFST 0x78
+
+/* ECC Clear Register */
+#define ECC_CLR_OFST 0x7C
+
+/* ECC Error count Register */
+#define ECC_ERRCNT_OFST 0x80
+
+/* ECC Corrected Error Address Register */
+#define ECC_CEADDR0_OFST 0x84
+#define ECC_CEADDR1_OFST 0x88
+
+/* ECC Syndrome Registers */
+#define ECC_CSYND0_OFST 0x8C
+#define ECC_CSYND1_OFST 0x90
+#define ECC_CSYND2_OFST 0x94
+
+/* ECC Bit Mask0 Address Register */
+#define ECC_BITMASK0_OFST 0x98
+#define ECC_BITMASK1_OFST 0x9C
+#define ECC_BITMASK2_OFST 0xA0
+
+/* ECC UnCorrected Error Address Register */
+#define ECC_UEADDR0_OFST 0xA4
+#define ECC_UEADDR1_OFST 0xA8
+
+/* ECC Syndrome Registers */
+#define ECC_UESYND0_OFST 0xAC
+#define ECC_UESYND1_OFST 0xB0
+#define ECC_UESYND2_OFST 0xB4
+
+/* ECC Poison Address Reg */
+#define ECC_POISON0_OFST 0xB8
+#define ECC_POISON1_OFST 0xBC
+
+#define ECC_ADDRMAP0_OFFSET 0x200
+
+/* Control register bitfield definitions */
+#define ECC_CTRL_BUSWIDTH_MASK 0x3000
+#define ECC_CTRL_BUSWIDTH_SHIFT 12
+#define ECC_CTRL_CLR_CE_ERRCNT BIT(2)
+#define ECC_CTRL_CLR_UE_ERRCNT BIT(3)
+
+/* DDR Control Register width definitions */
+#define DDRCTL_EWDTH_16 2
+#define DDRCTL_EWDTH_32 1
+#define DDRCTL_EWDTH_64 0
+
+/* ECC status register definitions */
+#define ECC_STAT_UECNT_MASK 0xF0000
+#define ECC_STAT_UECNT_SHIFT 16
+#define ECC_STAT_CECNT_MASK 0xF00
+#define ECC_STAT_CECNT_SHIFT 8
+#define ECC_STAT_BITNUM_MASK 0x7F
+
+/* DDR QOS Interrupt register definitions */
+#define DDR_QOS_IRQ_STAT_OFST 0x20200
+#define DDR_QOSUE_MASK 0x4
+#define DDR_QOSCE_MASK 0x2
+#define ECC_CE_UE_INTR_MASK 0x6
+#define DDR_QOS_IRQ_EN_OFST 0x20208
+#define DDR_QOS_IRQ_DB_OFST 0x2020C
+
+/* ECC Corrected Error Register Mask and Shifts*/
+#define ECC_CEADDR0_RW_MASK 0x3FFFF
+#define ECC_CEADDR0_RNK_MASK BIT(24)
+#define ECC_CEADDR1_BNKGRP_MASK 0x3000000
+#define ECC_CEADDR1_BNKNR_MASK 0x70000
+#define ECC_CEADDR1_BLKNR_MASK 0xFFF
+#define ECC_CEADDR1_BNKGRP_SHIFT 24
+#define ECC_CEADDR1_BNKNR_SHIFT 16
+
+/* ECC Poison register shifts */
+#define ECC_POISON0_RANK_SHIFT 24
+#define ECC_POISON0_RANK_MASK BIT(24)
+#define ECC_POISON0_COLUMN_SHIFT 0
+#define ECC_POISON0_COLUMN_MASK 0xFFF
+#define ECC_POISON1_BG_SHIFT 28
+#define ECC_POISON1_BG_MASK 0x30000000
+#define ECC_POISON1_BANKNR_SHIFT 24
+#define ECC_POISON1_BANKNR_MASK 0x7000000
+#define ECC_POISON1_ROW_SHIFT 0
+#define ECC_POISON1_ROW_MASK 0x3FFFF
+
+/* DDR Memory type defines */
+#define MEM_TYPE_DDR3 0x1
+#define MEM_TYPE_LPDDR3 0x8
+#define MEM_TYPE_DDR2 0x4
+#define MEM_TYPE_DDR4 0x10
+#define MEM_TYPE_LPDDR4 0x20
+
+/* DDRC Software control register */
+#define DDRC_SWCTL 0x320
+
+/* DDRC ECC CE & UE poison mask */
+#define ECC_CEPOISON_MASK 0x3
+#define ECC_UEPOISON_MASK 0x1
+
+/* DDRC Device config masks */
+#define DDRC_MSTR_CFG_MASK 0xC0000000
+#define DDRC_MSTR_CFG_SHIFT 30
+#define DDRC_MSTR_CFG_X4_MASK 0x0
+#define DDRC_MSTR_CFG_X8_MASK 0x1
+#define DDRC_MSTR_CFG_X16_MASK 0x2
+#define DDRC_MSTR_CFG_X32_MASK 0x3
+
+#define DDR_MAX_ROW_SHIFT 18
+#define DDR_MAX_COL_SHIFT 14
+#define DDR_MAX_BANK_SHIFT 3
+#define DDR_MAX_BANKGRP_SHIFT 2
+
+#define ROW_MAX_VAL_MASK 0xF
+#define COL_MAX_VAL_MASK 0xF
+#define BANK_MAX_VAL_MASK 0x1F
+#define BANKGRP_MAX_VAL_MASK 0x1F
+#define RANK_MAX_VAL_MASK 0x1F
+
+#define ROW_B0_BASE 6
+#define ROW_B1_BASE 7
+#define ROW_B2_BASE 8
+#define ROW_B3_BASE 9
+#define ROW_B4_BASE 10
+#define ROW_B5_BASE 11
+#define ROW_B6_BASE 12
+#define ROW_B7_BASE 13
+#define ROW_B8_BASE 14
+#define ROW_B9_BASE 15
+#define ROW_B10_BASE 16
+#define ROW_B11_BASE 17
+#define ROW_B12_BASE 18
+#define ROW_B13_BASE 19
+#define ROW_B14_BASE 20
+#define ROW_B15_BASE 21
+#define ROW_B16_BASE 22
+#define ROW_B17_BASE 23
+
+#define COL_B2_BASE 2
+#define COL_B3_BASE 3
+#define COL_B4_BASE 4
+#define COL_B5_BASE 5
+#define COL_B6_BASE 6
+#define COL_B7_BASE 7
+#define COL_B8_BASE 8
+#define COL_B9_BASE 9
+#define COL_B10_BASE 10
+#define COL_B11_BASE 11
+#define COL_B12_BASE 12
+#define COL_B13_BASE 13
+
+#define BANK_B0_BASE 2
+#define BANK_B1_BASE 3
+#define BANK_B2_BASE 4
+
+#define BANKGRP_B0_BASE 2
+#define BANKGRP_B1_BASE 3
+
+#define RANK_B0_BASE 6
+
/**
* struct ecc_error_info - ECC error log information.
* @row: Row number.
WARNING: multiple messages have this Message-ID (diff)
From: Manish Narani <manish.narani@xilinx.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
michal.simek@xilinx.com, bp@alien8.de, mchehab@kernel.org,
manish.narani@xilinx.com, amit.kucheria@linaro.org,
sudeep.holla@arm.com, leoyang.li@nxp.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-edac@vger.kernel.org
Subject: [PATCH v10 3/6] edac: synopsys: Add macro defines for ZynqMP DDRC
Date: Thu, 25 Oct 2018 11:36:58 +0530 [thread overview]
Message-ID: <1540447621-22870-4-git-send-email-manish.narani@xilinx.com> (raw)
In-Reply-To: <1540447621-22870-1-git-send-email-manish.narani@xilinx.com>
Add macro defines for ZynqMP DDR controller. These macros will be used
for ZynqMP ECC operations.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
drivers/edac/synopsys_edac.c | 168 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 168 insertions(+)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 0005ef3..d1999e0 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -97,6 +97,174 @@
#define SCRUB_MODE_MASK 0x7
#define SCRUB_MODE_SECDED 0x4
+/* DDR ECC Quirks */
+#define DDR_ECC_INTR_SUPPORT BIT(0)
+#define DDR_ECC_DATA_POISON_SUPPORT BIT(1)
+
+/* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
+/* ECC Configuration Registers */
+#define ECC_CFG0_OFST 0x70
+#define ECC_CFG1_OFST 0x74
+
+/* ECC Status Register */
+#define ECC_STAT_OFST 0x78
+
+/* ECC Clear Register */
+#define ECC_CLR_OFST 0x7C
+
+/* ECC Error count Register */
+#define ECC_ERRCNT_OFST 0x80
+
+/* ECC Corrected Error Address Register */
+#define ECC_CEADDR0_OFST 0x84
+#define ECC_CEADDR1_OFST 0x88
+
+/* ECC Syndrome Registers */
+#define ECC_CSYND0_OFST 0x8C
+#define ECC_CSYND1_OFST 0x90
+#define ECC_CSYND2_OFST 0x94
+
+/* ECC Bit Mask0 Address Register */
+#define ECC_BITMASK0_OFST 0x98
+#define ECC_BITMASK1_OFST 0x9C
+#define ECC_BITMASK2_OFST 0xA0
+
+/* ECC UnCorrected Error Address Register */
+#define ECC_UEADDR0_OFST 0xA4
+#define ECC_UEADDR1_OFST 0xA8
+
+/* ECC Syndrome Registers */
+#define ECC_UESYND0_OFST 0xAC
+#define ECC_UESYND1_OFST 0xB0
+#define ECC_UESYND2_OFST 0xB4
+
+/* ECC Poison Address Reg */
+#define ECC_POISON0_OFST 0xB8
+#define ECC_POISON1_OFST 0xBC
+
+#define ECC_ADDRMAP0_OFFSET 0x200
+
+/* Control register bitfield definitions */
+#define ECC_CTRL_BUSWIDTH_MASK 0x3000
+#define ECC_CTRL_BUSWIDTH_SHIFT 12
+#define ECC_CTRL_CLR_CE_ERRCNT BIT(2)
+#define ECC_CTRL_CLR_UE_ERRCNT BIT(3)
+
+/* DDR Control Register width definitions */
+#define DDRCTL_EWDTH_16 2
+#define DDRCTL_EWDTH_32 1
+#define DDRCTL_EWDTH_64 0
+
+/* ECC status register definitions */
+#define ECC_STAT_UECNT_MASK 0xF0000
+#define ECC_STAT_UECNT_SHIFT 16
+#define ECC_STAT_CECNT_MASK 0xF00
+#define ECC_STAT_CECNT_SHIFT 8
+#define ECC_STAT_BITNUM_MASK 0x7F
+
+/* DDR QOS Interrupt register definitions */
+#define DDR_QOS_IRQ_STAT_OFST 0x20200
+#define DDR_QOSUE_MASK 0x4
+#define DDR_QOSCE_MASK 0x2
+#define ECC_CE_UE_INTR_MASK 0x6
+#define DDR_QOS_IRQ_EN_OFST 0x20208
+#define DDR_QOS_IRQ_DB_OFST 0x2020C
+
+/* ECC Corrected Error Register Mask and Shifts*/
+#define ECC_CEADDR0_RW_MASK 0x3FFFF
+#define ECC_CEADDR0_RNK_MASK BIT(24)
+#define ECC_CEADDR1_BNKGRP_MASK 0x3000000
+#define ECC_CEADDR1_BNKNR_MASK 0x70000
+#define ECC_CEADDR1_BLKNR_MASK 0xFFF
+#define ECC_CEADDR1_BNKGRP_SHIFT 24
+#define ECC_CEADDR1_BNKNR_SHIFT 16
+
+/* ECC Poison register shifts */
+#define ECC_POISON0_RANK_SHIFT 24
+#define ECC_POISON0_RANK_MASK BIT(24)
+#define ECC_POISON0_COLUMN_SHIFT 0
+#define ECC_POISON0_COLUMN_MASK 0xFFF
+#define ECC_POISON1_BG_SHIFT 28
+#define ECC_POISON1_BG_MASK 0x30000000
+#define ECC_POISON1_BANKNR_SHIFT 24
+#define ECC_POISON1_BANKNR_MASK 0x7000000
+#define ECC_POISON1_ROW_SHIFT 0
+#define ECC_POISON1_ROW_MASK 0x3FFFF
+
+/* DDR Memory type defines */
+#define MEM_TYPE_DDR3 0x1
+#define MEM_TYPE_LPDDR3 0x8
+#define MEM_TYPE_DDR2 0x4
+#define MEM_TYPE_DDR4 0x10
+#define MEM_TYPE_LPDDR4 0x20
+
+/* DDRC Software control register */
+#define DDRC_SWCTL 0x320
+
+/* DDRC ECC CE & UE poison mask */
+#define ECC_CEPOISON_MASK 0x3
+#define ECC_UEPOISON_MASK 0x1
+
+/* DDRC Device config masks */
+#define DDRC_MSTR_CFG_MASK 0xC0000000
+#define DDRC_MSTR_CFG_SHIFT 30
+#define DDRC_MSTR_CFG_X4_MASK 0x0
+#define DDRC_MSTR_CFG_X8_MASK 0x1
+#define DDRC_MSTR_CFG_X16_MASK 0x2
+#define DDRC_MSTR_CFG_X32_MASK 0x3
+
+#define DDR_MAX_ROW_SHIFT 18
+#define DDR_MAX_COL_SHIFT 14
+#define DDR_MAX_BANK_SHIFT 3
+#define DDR_MAX_BANKGRP_SHIFT 2
+
+#define ROW_MAX_VAL_MASK 0xF
+#define COL_MAX_VAL_MASK 0xF
+#define BANK_MAX_VAL_MASK 0x1F
+#define BANKGRP_MAX_VAL_MASK 0x1F
+#define RANK_MAX_VAL_MASK 0x1F
+
+#define ROW_B0_BASE 6
+#define ROW_B1_BASE 7
+#define ROW_B2_BASE 8
+#define ROW_B3_BASE 9
+#define ROW_B4_BASE 10
+#define ROW_B5_BASE 11
+#define ROW_B6_BASE 12
+#define ROW_B7_BASE 13
+#define ROW_B8_BASE 14
+#define ROW_B9_BASE 15
+#define ROW_B10_BASE 16
+#define ROW_B11_BASE 17
+#define ROW_B12_BASE 18
+#define ROW_B13_BASE 19
+#define ROW_B14_BASE 20
+#define ROW_B15_BASE 21
+#define ROW_B16_BASE 22
+#define ROW_B17_BASE 23
+
+#define COL_B2_BASE 2
+#define COL_B3_BASE 3
+#define COL_B4_BASE 4
+#define COL_B5_BASE 5
+#define COL_B6_BASE 6
+#define COL_B7_BASE 7
+#define COL_B8_BASE 8
+#define COL_B9_BASE 9
+#define COL_B10_BASE 10
+#define COL_B11_BASE 11
+#define COL_B12_BASE 12
+#define COL_B13_BASE 13
+
+#define BANK_B0_BASE 2
+#define BANK_B1_BASE 3
+#define BANK_B2_BASE 4
+
+#define BANKGRP_B0_BASE 2
+#define BANKGRP_B1_BASE 3
+
+#define RANK_B0_BASE 6
+
/**
* struct ecc_error_info - ECC error log information.
* @row: Row number.
--
2.1.1
WARNING: multiple messages have this Message-ID (diff)
From: manish.narani@xilinx.com (Manish Narani)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 3/6] edac: synopsys: Add macro defines for ZynqMP DDRC
Date: Thu, 25 Oct 2018 11:36:58 +0530 [thread overview]
Message-ID: <1540447621-22870-4-git-send-email-manish.narani@xilinx.com> (raw)
In-Reply-To: <1540447621-22870-1-git-send-email-manish.narani@xilinx.com>
Add macro defines for ZynqMP DDR controller. These macros will be used
for ZynqMP ECC operations.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
drivers/edac/synopsys_edac.c | 168 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 168 insertions(+)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 0005ef3..d1999e0 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -97,6 +97,174 @@
#define SCRUB_MODE_MASK 0x7
#define SCRUB_MODE_SECDED 0x4
+/* DDR ECC Quirks */
+#define DDR_ECC_INTR_SUPPORT BIT(0)
+#define DDR_ECC_DATA_POISON_SUPPORT BIT(1)
+
+/* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
+/* ECC Configuration Registers */
+#define ECC_CFG0_OFST 0x70
+#define ECC_CFG1_OFST 0x74
+
+/* ECC Status Register */
+#define ECC_STAT_OFST 0x78
+
+/* ECC Clear Register */
+#define ECC_CLR_OFST 0x7C
+
+/* ECC Error count Register */
+#define ECC_ERRCNT_OFST 0x80
+
+/* ECC Corrected Error Address Register */
+#define ECC_CEADDR0_OFST 0x84
+#define ECC_CEADDR1_OFST 0x88
+
+/* ECC Syndrome Registers */
+#define ECC_CSYND0_OFST 0x8C
+#define ECC_CSYND1_OFST 0x90
+#define ECC_CSYND2_OFST 0x94
+
+/* ECC Bit Mask0 Address Register */
+#define ECC_BITMASK0_OFST 0x98
+#define ECC_BITMASK1_OFST 0x9C
+#define ECC_BITMASK2_OFST 0xA0
+
+/* ECC UnCorrected Error Address Register */
+#define ECC_UEADDR0_OFST 0xA4
+#define ECC_UEADDR1_OFST 0xA8
+
+/* ECC Syndrome Registers */
+#define ECC_UESYND0_OFST 0xAC
+#define ECC_UESYND1_OFST 0xB0
+#define ECC_UESYND2_OFST 0xB4
+
+/* ECC Poison Address Reg */
+#define ECC_POISON0_OFST 0xB8
+#define ECC_POISON1_OFST 0xBC
+
+#define ECC_ADDRMAP0_OFFSET 0x200
+
+/* Control register bitfield definitions */
+#define ECC_CTRL_BUSWIDTH_MASK 0x3000
+#define ECC_CTRL_BUSWIDTH_SHIFT 12
+#define ECC_CTRL_CLR_CE_ERRCNT BIT(2)
+#define ECC_CTRL_CLR_UE_ERRCNT BIT(3)
+
+/* DDR Control Register width definitions */
+#define DDRCTL_EWDTH_16 2
+#define DDRCTL_EWDTH_32 1
+#define DDRCTL_EWDTH_64 0
+
+/* ECC status register definitions */
+#define ECC_STAT_UECNT_MASK 0xF0000
+#define ECC_STAT_UECNT_SHIFT 16
+#define ECC_STAT_CECNT_MASK 0xF00
+#define ECC_STAT_CECNT_SHIFT 8
+#define ECC_STAT_BITNUM_MASK 0x7F
+
+/* DDR QOS Interrupt register definitions */
+#define DDR_QOS_IRQ_STAT_OFST 0x20200
+#define DDR_QOSUE_MASK 0x4
+#define DDR_QOSCE_MASK 0x2
+#define ECC_CE_UE_INTR_MASK 0x6
+#define DDR_QOS_IRQ_EN_OFST 0x20208
+#define DDR_QOS_IRQ_DB_OFST 0x2020C
+
+/* ECC Corrected Error Register Mask and Shifts*/
+#define ECC_CEADDR0_RW_MASK 0x3FFFF
+#define ECC_CEADDR0_RNK_MASK BIT(24)
+#define ECC_CEADDR1_BNKGRP_MASK 0x3000000
+#define ECC_CEADDR1_BNKNR_MASK 0x70000
+#define ECC_CEADDR1_BLKNR_MASK 0xFFF
+#define ECC_CEADDR1_BNKGRP_SHIFT 24
+#define ECC_CEADDR1_BNKNR_SHIFT 16
+
+/* ECC Poison register shifts */
+#define ECC_POISON0_RANK_SHIFT 24
+#define ECC_POISON0_RANK_MASK BIT(24)
+#define ECC_POISON0_COLUMN_SHIFT 0
+#define ECC_POISON0_COLUMN_MASK 0xFFF
+#define ECC_POISON1_BG_SHIFT 28
+#define ECC_POISON1_BG_MASK 0x30000000
+#define ECC_POISON1_BANKNR_SHIFT 24
+#define ECC_POISON1_BANKNR_MASK 0x7000000
+#define ECC_POISON1_ROW_SHIFT 0
+#define ECC_POISON1_ROW_MASK 0x3FFFF
+
+/* DDR Memory type defines */
+#define MEM_TYPE_DDR3 0x1
+#define MEM_TYPE_LPDDR3 0x8
+#define MEM_TYPE_DDR2 0x4
+#define MEM_TYPE_DDR4 0x10
+#define MEM_TYPE_LPDDR4 0x20
+
+/* DDRC Software control register */
+#define DDRC_SWCTL 0x320
+
+/* DDRC ECC CE & UE poison mask */
+#define ECC_CEPOISON_MASK 0x3
+#define ECC_UEPOISON_MASK 0x1
+
+/* DDRC Device config masks */
+#define DDRC_MSTR_CFG_MASK 0xC0000000
+#define DDRC_MSTR_CFG_SHIFT 30
+#define DDRC_MSTR_CFG_X4_MASK 0x0
+#define DDRC_MSTR_CFG_X8_MASK 0x1
+#define DDRC_MSTR_CFG_X16_MASK 0x2
+#define DDRC_MSTR_CFG_X32_MASK 0x3
+
+#define DDR_MAX_ROW_SHIFT 18
+#define DDR_MAX_COL_SHIFT 14
+#define DDR_MAX_BANK_SHIFT 3
+#define DDR_MAX_BANKGRP_SHIFT 2
+
+#define ROW_MAX_VAL_MASK 0xF
+#define COL_MAX_VAL_MASK 0xF
+#define BANK_MAX_VAL_MASK 0x1F
+#define BANKGRP_MAX_VAL_MASK 0x1F
+#define RANK_MAX_VAL_MASK 0x1F
+
+#define ROW_B0_BASE 6
+#define ROW_B1_BASE 7
+#define ROW_B2_BASE 8
+#define ROW_B3_BASE 9
+#define ROW_B4_BASE 10
+#define ROW_B5_BASE 11
+#define ROW_B6_BASE 12
+#define ROW_B7_BASE 13
+#define ROW_B8_BASE 14
+#define ROW_B9_BASE 15
+#define ROW_B10_BASE 16
+#define ROW_B11_BASE 17
+#define ROW_B12_BASE 18
+#define ROW_B13_BASE 19
+#define ROW_B14_BASE 20
+#define ROW_B15_BASE 21
+#define ROW_B16_BASE 22
+#define ROW_B17_BASE 23
+
+#define COL_B2_BASE 2
+#define COL_B3_BASE 3
+#define COL_B4_BASE 4
+#define COL_B5_BASE 5
+#define COL_B6_BASE 6
+#define COL_B7_BASE 7
+#define COL_B8_BASE 8
+#define COL_B9_BASE 9
+#define COL_B10_BASE 10
+#define COL_B11_BASE 11
+#define COL_B12_BASE 12
+#define COL_B13_BASE 13
+
+#define BANK_B0_BASE 2
+#define BANK_B1_BASE 3
+#define BANK_B2_BASE 4
+
+#define BANKGRP_B0_BASE 2
+#define BANKGRP_B1_BASE 3
+
+#define RANK_B0_BASE 6
+
/**
* struct ecc_error_info - ECC error log information.
* @row: Row number.
--
2.1.1
next prev parent reply other threads:[~2018-10-25 6:08 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-25 6:06 [PATCH v10 0/6] EDAC: Enhancements to Synopsys EDAC driver Manish Narani
2018-10-25 6:06 ` Manish Narani
2018-10-25 6:06 ` Manish Narani
2018-10-25 6:06 ` [PATCH v10 1/6] edac: synopsys: Add error handling for NULL in probe() Manish Narani
2018-10-25 6:06 ` Manish Narani
2018-10-25 6:06 ` Manish Narani
2018-10-25 6:06 ` [v10,1/6] " Manish Narani
2018-10-25 6:06 ` [PATCH v10 2/6] dt: bindings: Document ZynqMP DDRC in Synopsys documentation Manish Narani
2018-10-25 6:06 ` Manish Narani
2018-10-25 6:06 ` Manish Narani
2018-10-25 6:06 ` [v10,2/6] " Manish Narani
2018-10-25 6:06 ` Manish Narani [this message]
2018-10-25 6:06 ` [PATCH v10 3/6] edac: synopsys: Add macro defines for ZynqMP DDRC Manish Narani
2018-10-25 6:06 ` Manish Narani
2018-10-25 6:06 ` [v10,3/6] " Manish Narani
2018-10-25 6:06 ` [PATCH v10 4/6] edac: synopsys: Add EDAC ECC support " Manish Narani
2018-10-25 6:06 ` Manish Narani
2018-10-25 6:06 ` Manish Narani
2018-10-25 6:06 ` [v10,4/6] " Manish Narani
2018-10-25 6:07 ` [PATCH v10 5/6] arm64: zynqmp: Add DDRC node Manish Narani
2018-10-25 6:07 ` Manish Narani
2018-10-25 6:07 ` Manish Narani
2018-10-25 6:07 ` [v10,5/6] " Manish Narani
2018-11-05 12:56 ` [PATCH v10 5/6] " Borislav Petkov
2018-11-05 12:56 ` Borislav Petkov
2018-11-05 12:56 ` [v10,5/6] " Borislav Petkov
2018-11-05 13:06 ` [PATCH v10 5/6] " Michal Simek
2018-11-05 13:06 ` Michal Simek
2018-11-05 13:06 ` Michal Simek
2018-11-05 13:06 ` [v10,5/6] " Michal Simek
2018-11-05 13:20 ` [PATCH v10 5/6] " Borislav Petkov
2018-11-05 13:20 ` Borislav Petkov
2018-11-05 13:20 ` [v10,5/6] " Borislav Petkov
2018-11-05 13:32 ` [PATCH v10 5/6] " Michal Simek
2018-11-05 13:32 ` Michal Simek
2018-11-05 13:32 ` Michal Simek
2018-11-05 13:32 ` [v10,5/6] " Michal Simek
2018-11-05 13:42 ` [PATCH v10 5/6] " Borislav Petkov
2018-11-05 13:42 ` Borislav Petkov
2018-11-05 13:42 ` [v10,5/6] " Borislav Petkov
2018-11-05 13:45 ` [PATCH v10 5/6] " Michal Simek
2018-11-05 13:45 ` Michal Simek
2018-11-05 13:45 ` Michal Simek
2018-11-05 13:45 ` [v10,5/6] " Michal Simek
2018-11-05 14:51 ` [PATCH v10 5/6] " Olof Johansson
2018-11-05 14:51 ` Olof Johansson
2018-11-05 14:51 ` [v10,5/6] " Olof Johansson
2018-11-05 19:47 ` [PATCH v10 5/6] " Borislav Petkov
2018-11-05 19:47 ` Borislav Petkov
2018-11-05 19:47 ` [v10,5/6] " Borislav Petkov
2018-11-05 20:38 ` [PATCH v10 5/6] " Olof Johansson
2018-11-05 20:38 ` Olof Johansson
2018-11-05 20:38 ` [v10,5/6] " Olof Johansson
2018-11-05 20:43 ` [PATCH v10 5/6] " Borislav Petkov
2018-11-05 20:43 ` Borislav Petkov
2018-11-05 20:43 ` [v10,5/6] " Borislav Petkov
2018-11-06 6:46 ` [PATCH v10 5/6] " Michal Simek
2018-11-06 6:46 ` Michal Simek
2018-11-06 6:46 ` Michal Simek
2018-11-06 6:46 ` [v10,5/6] " Michal Simek
2018-11-06 9:22 ` [PATCH v10 5/6] " Borislav Petkov
2018-11-06 9:22 ` Borislav Petkov
2018-11-06 9:22 ` [v10,5/6] " Borislav Petkov
2018-11-06 11:54 ` [PATCH v10 5/6] " Michal Simek
2018-11-06 11:54 ` Michal Simek
2018-11-06 11:54 ` Michal Simek
2018-11-06 11:54 ` [v10,5/6] " Michal Simek
2018-10-25 6:07 ` [PATCH v10 6/6] edac: synopsys: Add Error Injection support for ZynqMP DDRC Manish Narani
2018-10-25 6:07 ` Manish Narani
2018-10-25 6:07 ` Manish Narani
2018-10-25 6:07 ` [v10,6/6] " Manish Narani
2018-11-02 8:38 ` [PATCH v10 0/6] EDAC: Enhancements to Synopsys EDAC driver Manish Narani
2018-11-02 8:38 ` Manish Narani
2018-11-02 8:38 ` Manish Narani
2018-11-02 8:58 ` Borislav Petkov
2018-11-02 8:58 ` Borislav Petkov
2018-11-02 8:58 ` Borislav Petkov
2018-11-06 10:03 ` Borislav Petkov
2018-11-06 10:03 ` Borislav Petkov
2018-11-06 10:42 ` Manish Narani
2018-11-06 10:42 ` Manish Narani
2018-11-06 10:42 ` Manish Narani
2018-11-06 10:58 ` Borislav Petkov
2018-11-06 10:58 ` Borislav Petkov
2018-11-06 10:58 ` Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1540447621-22870-4-git-send-email-manish.narani@xilinx.com \
--to=manish.narani@xilinx.com \
--cc=amit.kucheria@linaro.org \
--cc=bp@alien8.de \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.