From: Neil Armstrong <narmstrong@baylibre.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH u-boot 07/19] configs: meson: change default load addresses
Date: Fri, 9 Nov 2018 16:26:46 +0100 [thread overview]
Message-ID: <1541777218-472-8-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1541777218-472-1-git-send-email-narmstrong@baylibre.com>
From: Jerome Brunet <jbrunet@baylibre.com>
The original chosen addresses conflict with the BL2 initialisation.
So far there was no issue with them but if we preload binaries in
RAM (ROMUSB boot) before running the BL2 they get corrupted by the
execution of BL2 init.
If we load them around 0x08000000, there is no such issue.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
include/configs/meson64.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/configs/meson64.h b/include/configs/meson64.h
index 1929a3e..80c883e 100644
--- a/include/configs/meson64.h
+++ b/include/configs/meson64.h
@@ -41,9 +41,9 @@
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
- "fdt_addr_r=0x01000000\0" \
- "scriptaddr=0x1f000000\0" \
- "kernel_addr_r=0x01080000\0" \
+ "fdt_addr_r=0x08008000\0" \
+ "scriptaddr=0x08000000\0" \
+ "kernel_addr_r=0x08080000\0" \
"pxefile_addr_r=0x01080000\0" \
"ramdisk_addr_r=0x13000000\0" \
"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH u-boot 07/19] configs: meson: change default load addresses
Date: Fri, 9 Nov 2018 16:26:46 +0100 [thread overview]
Message-ID: <1541777218-472-8-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1541777218-472-1-git-send-email-narmstrong@baylibre.com>
From: Jerome Brunet <jbrunet@baylibre.com>
The original chosen addresses conflict with the BL2 initialisation.
So far there was no issue with them but if we preload binaries in
RAM (ROMUSB boot) before running the BL2 they get corrupted by the
execution of BL2 init.
If we load them around 0x08000000, there is no such issue.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
include/configs/meson64.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/configs/meson64.h b/include/configs/meson64.h
index 1929a3e..80c883e 100644
--- a/include/configs/meson64.h
+++ b/include/configs/meson64.h
@@ -41,9 +41,9 @@
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
- "fdt_addr_r=0x01000000\0" \
- "scriptaddr=0x1f000000\0" \
- "kernel_addr_r=0x01080000\0" \
+ "fdt_addr_r=0x08008000\0" \
+ "scriptaddr=0x08000000\0" \
+ "kernel_addr_r=0x08080000\0" \
"pxefile_addr_r=0x01080000\0" \
"ramdisk_addr_r=0x13000000\0" \
"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
--
2.7.4
next prev parent reply other threads:[~2018-11-09 15:26 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-09 15:26 [U-Boot] [PATCH u-boot 00/19] Amlogic Meson cleanup for AXG SoC support Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 01/19] ARM: meson: clean-up platform selection Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 02/19] configs: meson: remove unnecessary MESON_FDTFILE_SETTING Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 03/19] board: amlogic: remove p212 derivatives Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 04/19] board: amlogic: move khadas-vim2 as q200 ref board Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 05/19] board: amlogic: factorise gxbb boards Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 06/19] ARM: rework amlogic configuration Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong [this message]
2018-11-09 15:26 ` [PATCH u-boot 07/19] configs: meson: change default load addresses Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 08/19] pinctrl: meson: rework gx pmx function Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 09/19] pinctrl: meson: select generic pinctrl Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 10/19] pinctrl: meson: add axg support Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-20 14:06 ` [U-Boot] " Carlo Caione
2018-11-20 14:06 ` Carlo Caione
2018-11-20 14:47 ` [U-Boot] " Carlo Caione
2018-11-20 14:47 ` Carlo Caione
2018-11-21 9:34 ` [U-Boot] " Neil Armstrong
2018-11-21 9:34 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 11/19] clk: meson: add static to meson_gates table Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 12/19] clk: meson: silence debug print Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 13/19] ARM: meson: rework soc arch file to prepare for new SoC Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-20 21:11 ` [U-Boot] " Loic Devulder
2018-11-20 21:11 ` Loic Devulder
2018-11-21 9:34 ` Neil Armstrong
2018-11-21 9:34 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 14/19] ARM: meson: Add support for AXG family Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 15/19] ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 16/19] clk: Add clock driver for AXG Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 17/19] board: amlogic: add support for S400 board Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-20 21:08 ` [U-Boot] " Loic Devulder
2018-11-20 21:08 ` Loic Devulder
2018-11-21 9:32 ` Neil Armstrong
2018-11-21 9:32 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 18/19] ARM: meson: factorize common code out amlogic's boards Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
2018-11-09 15:26 ` [U-Boot] [PATCH u-boot 19/19] ARM: meson: Add boot device discovery Neil Armstrong
2018-11-09 15:26 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541777218-472-8-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.