* [PATCH 00/17] bcm2835: Treewide switch to SPDX identifier
@ 2018-11-10 14:17 ` Stefan Wahren
0 siblings, 0 replies; 4+ messages in thread
From: Stefan Wahren @ 2018-11-10 14:17 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Florian Fainelli, Ray Jui,
Scott Branden, Eric Anholt, Matt Mackall, Herbert Xu,
Arnd Bergmann, Greg Kroah-Hartman, Michael Turquette,
Stephen Boyd, Daniel Lezcano, Thomas Gleixner, Vinod Koul,
Jason Cooper, Marc Zyngier, Jassi Brar, Ulf Hansson,
Linus Walleij, Thierry Reding, Mark Brown, Zhang Rui,
Eduardo Valentin, Liam Girdwood, Jaroslav Kysela, Takashi Iwai
Cc: bcm-kernel-feedback-list, linux-rpi-kernel, linux-arm-kernel,
linux-kernel, linux-crypto, linux-clk, dmaengine, linux-i2c,
linux-mmc, linux-gpio, linux-pwm, linux-spi, linux-pm,
alsa-devel, Stefan Wahren
After fixing the module license of some bcm2835 drivers in "Fix MODULE_LICENSE
of bcm2835 drivers", we can finally switch all outstanding bcm2835 /
Raspberry Pi drivers to SPDX identifier and drop the unnecessary license text.
I omit the staging area, because there are proposed a lot of changes for
vc04_services.
I hope it is okay to have the binding header integrated in the tree-wise
patches instead of a separate one. This should avoid conflicts while merging.
Stefan Wahren (17):
ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
ARM: mach-bcm: Switch bcm2835 and platsmp to SPDX identifier
hw_random: bcm2835-rng: Switch to SPDX identifier
clk: bcm2835: Switch to SPDX identifier
clocksource: bcm2835: Switch to SPDX identifier
dma: bcm2835: Switch to SPDX identifier
firmware: raspberrypi: Switch to SPDX identifier
i2c: bcm2835: Switch to SPDX identifier
irqchip: bcm283x: Switch to SPDX identifier
mailbox: bcm2835: Switch to SPDX identifier
mmc: bcm2835: Switch to SPDX identifier
pinctrl: bcm2835: Switch to SPDX identifier
pwm: bcm2835: Switch to SPDX identifier
soc: bcm: Switch raspberrypi-power to SPDX identifier
spi: bcm2835: Switch to SPDX identifier
thermal: bcm2835: Switch to SPDX identifier
ASoc: bcm2835-i2s: Switch to SPDX identifier
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 8 +-------
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 8 +-------
arch/arm/mach-bcm/board_bcm2835.c | 11 +----------
arch/arm/mach-bcm/platsmp.c | 10 +---------
arch/arm/mach-bcm/platsmp.h | 6 +-----
drivers/char/hw_random/bcm2835-rng.c | 7 ++-----
drivers/clk/bcm/clk-bcm2835-aux.c | 11 +----------
drivers/clk/bcm/clk-bcm2835.c | 12 +-----------
drivers/clocksource/bcm2835_timer.c | 15 +--------------
drivers/dma/bcm2835-dma.c | 11 +----------
drivers/firmware/raspberrypi.c | 5 +----
drivers/i2c/busses/i2c-bcm2835.c | 10 +---------
drivers/irqchip/irq-bcm2835.c | 11 +----------
drivers/irqchip/irq-bcm2836.c | 11 +----------
drivers/mailbox/bcm2835-mailbox.c | 8 +-------
drivers/mmc/host/bcm2835.c | 13 +------------
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 11 +----------
drivers/pwm/pwm-bcm2835.c | 5 +----
drivers/soc/bcm/raspberrypi-power.c | 5 +----
drivers/spi/spi-bcm2835.c | 11 +----------
drivers/spi/spi-bcm2835aux.c | 11 +----------
drivers/thermal/broadcom/bcm2835_thermal.c | 11 +----------
include/dt-bindings/clock/bcm2835-aux.h | 10 +---------
include/dt-bindings/clock/bcm2835.h | 10 +---------
include/dt-bindings/pinctrl/bcm2835.h | 8 +-------
include/dt-bindings/power/raspberrypi-power.h | 5 +----
include/soc/bcm2835/raspberrypi-firmware.h | 5 +----
sound/soc/bcm/bcm2835-i2s.c | 10 +---------
28 files changed, 29 insertions(+), 230 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 00/17] bcm2835: Treewide switch to SPDX identifier
@ 2018-11-10 14:17 ` Stefan Wahren
0 siblings, 0 replies; 4+ messages in thread
From: Stefan Wahren @ 2018-11-10 14:17 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Florian Fainelli, Ray Jui,
Scott Branden, Eric Anholt, Matt Mackall, Herbert Xu,
Arnd Bergmann, Greg Kroah-Hartman, Michael Turquette,
Stephen Boyd, Daniel Lezcano, Thomas Gleixner, Vinod Koul,
Jason Cooper, Marc Zyngier, Jassi Brar, Ulf Hansson,
Linus Walleij, Thierry Reding, Mark Brown, Zhang Rui,
Eduardo Valentin
Cc: Stefan Wahren, linux-pwm, alsa-devel, linux-pm, linux-mmc,
linux-kernel, linux-spi, linux-i2c, linux-gpio,
bcm-kernel-feedback-list, linux-crypto, dmaengine, linux-clk,
linux-arm-kernel, linux-rpi-kernel
After fixing the module license of some bcm2835 drivers in "Fix MODULE_LICENSE
of bcm2835 drivers", we can finally switch all outstanding bcm2835 /
Raspberry Pi drivers to SPDX identifier and drop the unnecessary license text.
I omit the staging area, because there are proposed a lot of changes for
vc04_services.
I hope it is okay to have the binding header integrated in the tree-wise
patches instead of a separate one. This should avoid conflicts while merging.
Stefan Wahren (17):
ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
ARM: mach-bcm: Switch bcm2835 and platsmp to SPDX identifier
hw_random: bcm2835-rng: Switch to SPDX identifier
clk: bcm2835: Switch to SPDX identifier
clocksource: bcm2835: Switch to SPDX identifier
dma: bcm2835: Switch to SPDX identifier
firmware: raspberrypi: Switch to SPDX identifier
i2c: bcm2835: Switch to SPDX identifier
irqchip: bcm283x: Switch to SPDX identifier
mailbox: bcm2835: Switch to SPDX identifier
mmc: bcm2835: Switch to SPDX identifier
pinctrl: bcm2835: Switch to SPDX identifier
pwm: bcm2835: Switch to SPDX identifier
soc: bcm: Switch raspberrypi-power to SPDX identifier
spi: bcm2835: Switch to SPDX identifier
thermal: bcm2835: Switch to SPDX identifier
ASoc: bcm2835-i2s: Switch to SPDX identifier
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 8 +-------
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 8 +-------
arch/arm/mach-bcm/board_bcm2835.c | 11 +----------
arch/arm/mach-bcm/platsmp.c | 10 +---------
arch/arm/mach-bcm/platsmp.h | 6 +-----
drivers/char/hw_random/bcm2835-rng.c | 7 ++-----
drivers/clk/bcm/clk-bcm2835-aux.c | 11 +----------
drivers/clk/bcm/clk-bcm2835.c | 12 +-----------
drivers/clocksource/bcm2835_timer.c | 15 +--------------
drivers/dma/bcm2835-dma.c | 11 +----------
drivers/firmware/raspberrypi.c | 5 +----
drivers/i2c/busses/i2c-bcm2835.c | 10 +---------
drivers/irqchip/irq-bcm2835.c | 11 +----------
drivers/irqchip/irq-bcm2836.c | 11 +----------
drivers/mailbox/bcm2835-mailbox.c | 8 +-------
drivers/mmc/host/bcm2835.c | 13 +------------
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 11 +----------
drivers/pwm/pwm-bcm2835.c | 5 +----
drivers/soc/bcm/raspberrypi-power.c | 5 +----
drivers/spi/spi-bcm2835.c | 11 +----------
drivers/spi/spi-bcm2835aux.c | 11 +----------
drivers/thermal/broadcom/bcm2835_thermal.c | 11 +----------
include/dt-bindings/clock/bcm2835-aux.h | 10 +---------
include/dt-bindings/clock/bcm2835.h | 10 +---------
include/dt-bindings/pinctrl/bcm2835.h | 8 +-------
include/dt-bindings/power/raspberrypi-power.h | 5 +----
include/soc/bcm2835/raspberrypi-firmware.h | 5 +----
sound/soc/bcm/bcm2835-i2s.c | 10 +---------
28 files changed, 29 insertions(+), 230 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 00/17] bcm2835: Treewide switch to SPDX identifier
@ 2018-11-10 14:17 ` Stefan Wahren
0 siblings, 0 replies; 4+ messages in thread
From: Stefan Wahren @ 2018-11-10 14:17 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Florian Fainelli, Ray Jui,
Scott Branden, Eric Anholt, Matt Mackall, Herbert Xu,
Arnd Bergmann, Greg Kroah-Hartman, Michael Turquette,
Stephen Boyd, Daniel Lezcano, Thomas Gleixner, Vinod Koul,
Jason Cooper, Marc Zyngier, Jassi Brar, Ulf Hansson,
Linus Walleij, Thierry Reding, Mark Brown, Zhang Rui,
Eduardo Valentin
Cc: Stefan Wahren, linux-pwm, alsa-devel, linux-pm, linux-mmc,
linux-kernel, linux-spi, linux-i2c, linux-gpio,
bcm-kernel-feedback-list, linux-crypto, dmaengine, linux-clk,
linux-arm-kernel, linux-rpi-kernel
After fixing the module license of some bcm2835 drivers in "Fix MODULE_LICENSE
of bcm2835 drivers", we can finally switch all outstanding bcm2835 /
Raspberry Pi drivers to SPDX identifier and drop the unnecessary license text.
I omit the staging area, because there are proposed a lot of changes for
vc04_services.
I hope it is okay to have the binding header integrated in the tree-wise
patches instead of a separate one. This should avoid conflicts while merging.
Stefan Wahren (17):
ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
ARM: mach-bcm: Switch bcm2835 and platsmp to SPDX identifier
hw_random: bcm2835-rng: Switch to SPDX identifier
clk: bcm2835: Switch to SPDX identifier
clocksource: bcm2835: Switch to SPDX identifier
dma: bcm2835: Switch to SPDX identifier
firmware: raspberrypi: Switch to SPDX identifier
i2c: bcm2835: Switch to SPDX identifier
irqchip: bcm283x: Switch to SPDX identifier
mailbox: bcm2835: Switch to SPDX identifier
mmc: bcm2835: Switch to SPDX identifier
pinctrl: bcm2835: Switch to SPDX identifier
pwm: bcm2835: Switch to SPDX identifier
soc: bcm: Switch raspberrypi-power to SPDX identifier
spi: bcm2835: Switch to SPDX identifier
thermal: bcm2835: Switch to SPDX identifier
ASoc: bcm2835-i2s: Switch to SPDX identifier
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 8 +-------
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 8 +-------
arch/arm/mach-bcm/board_bcm2835.c | 11 +----------
arch/arm/mach-bcm/platsmp.c | 10 +---------
arch/arm/mach-bcm/platsmp.h | 6 +-----
drivers/char/hw_random/bcm2835-rng.c | 7 ++-----
drivers/clk/bcm/clk-bcm2835-aux.c | 11 +----------
drivers/clk/bcm/clk-bcm2835.c | 12 +-----------
drivers/clocksource/bcm2835_timer.c | 15 +--------------
drivers/dma/bcm2835-dma.c | 11 +----------
drivers/firmware/raspberrypi.c | 5 +----
drivers/i2c/busses/i2c-bcm2835.c | 10 +---------
drivers/irqchip/irq-bcm2835.c | 11 +----------
drivers/irqchip/irq-bcm2836.c | 11 +----------
drivers/mailbox/bcm2835-mailbox.c | 8 +-------
drivers/mmc/host/bcm2835.c | 13 +------------
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 11 +----------
drivers/pwm/pwm-bcm2835.c | 5 +----
drivers/soc/bcm/raspberrypi-power.c | 5 +----
drivers/spi/spi-bcm2835.c | 11 +----------
drivers/spi/spi-bcm2835aux.c | 11 +----------
drivers/thermal/broadcom/bcm2835_thermal.c | 11 +----------
include/dt-bindings/clock/bcm2835-aux.h | 10 +---------
include/dt-bindings/clock/bcm2835.h | 10 +---------
include/dt-bindings/pinctrl/bcm2835.h | 8 +-------
include/dt-bindings/power/raspberrypi-power.h | 5 +----
include/soc/bcm2835/raspberrypi-firmware.h | 5 +----
sound/soc/bcm/bcm2835-i2s.c | 10 +---------
28 files changed, 29 insertions(+), 230 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 00/17] bcm2835: Treewide switch to SPDX identifier
@ 2018-11-10 14:17 ` Stefan Wahren
0 siblings, 0 replies; 4+ messages in thread
From: Stefan Wahren @ 2018-11-10 14:17 UTC (permalink / raw)
To: linux-arm-kernel
After fixing the module license of some bcm2835 drivers in "Fix MODULE_LICENSE
of bcm2835 drivers", we can finally switch all outstanding bcm2835 /
Raspberry Pi drivers to SPDX identifier and drop the unnecessary license text.
I omit the staging area, because there are proposed a lot of changes for
vc04_services.
I hope it is okay to have the binding header integrated in the tree-wise
patches instead of a separate one. This should avoid conflicts while merging.
Stefan Wahren (17):
ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
ARM: mach-bcm: Switch bcm2835 and platsmp to SPDX identifier
hw_random: bcm2835-rng: Switch to SPDX identifier
clk: bcm2835: Switch to SPDX identifier
clocksource: bcm2835: Switch to SPDX identifier
dma: bcm2835: Switch to SPDX identifier
firmware: raspberrypi: Switch to SPDX identifier
i2c: bcm2835: Switch to SPDX identifier
irqchip: bcm283x: Switch to SPDX identifier
mailbox: bcm2835: Switch to SPDX identifier
mmc: bcm2835: Switch to SPDX identifier
pinctrl: bcm2835: Switch to SPDX identifier
pwm: bcm2835: Switch to SPDX identifier
soc: bcm: Switch raspberrypi-power to SPDX identifier
spi: bcm2835: Switch to SPDX identifier
thermal: bcm2835: Switch to SPDX identifier
ASoc: bcm2835-i2s: Switch to SPDX identifier
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 8 +-------
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 8 +-------
arch/arm/mach-bcm/board_bcm2835.c | 11 +----------
arch/arm/mach-bcm/platsmp.c | 10 +---------
arch/arm/mach-bcm/platsmp.h | 6 +-----
drivers/char/hw_random/bcm2835-rng.c | 7 ++-----
drivers/clk/bcm/clk-bcm2835-aux.c | 11 +----------
drivers/clk/bcm/clk-bcm2835.c | 12 +-----------
drivers/clocksource/bcm2835_timer.c | 15 +--------------
drivers/dma/bcm2835-dma.c | 11 +----------
drivers/firmware/raspberrypi.c | 5 +----
drivers/i2c/busses/i2c-bcm2835.c | 10 +---------
drivers/irqchip/irq-bcm2835.c | 11 +----------
drivers/irqchip/irq-bcm2836.c | 11 +----------
drivers/mailbox/bcm2835-mailbox.c | 8 +-------
drivers/mmc/host/bcm2835.c | 13 +------------
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 11 +----------
drivers/pwm/pwm-bcm2835.c | 5 +----
drivers/soc/bcm/raspberrypi-power.c | 5 +----
drivers/spi/spi-bcm2835.c | 11 +----------
drivers/spi/spi-bcm2835aux.c | 11 +----------
drivers/thermal/broadcom/bcm2835_thermal.c | 11 +----------
include/dt-bindings/clock/bcm2835-aux.h | 10 +---------
include/dt-bindings/clock/bcm2835.h | 10 +---------
include/dt-bindings/pinctrl/bcm2835.h | 8 +-------
include/dt-bindings/power/raspberrypi-power.h | 5 +----
include/soc/bcm2835/raspberrypi-firmware.h | 5 +----
sound/soc/bcm/bcm2835-i2s.c | 10 +---------
28 files changed, 29 insertions(+), 230 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-11-11 0:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-10 14:17 [PATCH 00/17] bcm2835: Treewide switch to SPDX identifier Stefan Wahren
2018-11-10 14:17 ` Stefan Wahren
2018-11-10 14:17 ` Stefan Wahren
2018-11-10 14:17 ` Stefan Wahren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.