All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jaehoon Chung <jh80.chung@samsung.com>
To: "Stefan Roese" <sr@denx.de>, "Pali Rohár" <pali@kernel.org>,
	"Andre Heider" <a.heider@gmail.com>,
	"Gérald Kerma" <gerald@gk2.net>,
	"Konstantin Porotchkin" <kostap@marvell.com>,
	"Baruch Siach" <baruch@tkos.co.il>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Peng Fan" <peng.fan@nxp.com>
Cc: u-boot@lists.denx.de
Subject: Re: [PATCH 3/3] mmc: mmc_get_op_cond: Allow quiet detection of eMMC
Date: Thu, 15 Jul 2021 17:41:36 +0900	[thread overview]
Message-ID: <154200cc-5ac0-b18d-59eb-f855a0ab9267@samsung.com> (raw)
In-Reply-To: <90f97347-fadb-6ebb-2705-91b9f8fd4b32@denx.de>

Hi Stefan,

On 7/15/21 5:20 PM, Stefan Roese wrote:
> (added Jaehoon as MMC co-maintainer)
> 
> On 15.07.21 10:03, Stefan Roese wrote:
>> On 14.07.21 16:37, Pali Rohár wrote:
>>> Add a new 'quiet' argument to mmc_get_op_cond() function which avoids
>>> printing error message when SD/eMMC card is not detected.
>>>
>>> Espressobin and mx6cuboxi boards use this function for detecting presence
>>> of eMMC and therefore it is expected and normal that eMMC does not have to
>>> be connected. So error message "Card did not respond to voltage select!"
>>> should be skipped in this case as it is not an error.
>>>
>>> Signed-off-by: Pali Rohár <pali@kernel.org>
>>
>> Reviewed-by: Stefan Roese <sr@denx.de>
> 
> Peng, Jaehoon are you okay with this patch? If yes, is it okay that
> I will pull it via the marvell tree?

I don't have any objection.

Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

> 
> Thanks,
> Stefan
> 
>> Thanks,
>> Stefan
>>
>>> ---
>>>   board/Marvell/mvebu_armada-37xx/board.c | 2 +-
>>>   board/solidrun/mx6cuboxi/mx6cuboxi.c    | 2 +-
>>>   drivers/mmc/mmc.c                       | 7 ++++---
>>>   include/mmc.h                           | 3 ++-
>>>   4 files changed, 8 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
>>> index 6086996b8062..fdc873b1952f 100644
>>> --- a/board/Marvell/mvebu_armada-37xx/board.c
>>> +++ b/board/Marvell/mvebu_armada-37xx/board.c
>>> @@ -124,7 +124,7 @@ int board_late_init(void)
>>>       /* eMMC is mmc dev num 1 */
>>>       mmc_dev = find_mmc_device(1);
>>> -    emmc = (mmc_dev && mmc_get_op_cond(mmc_dev) == 0);
>>> +    emmc = (mmc_dev && mmc_get_op_cond(mmc_dev, true) == 0);
>>>       /* if eMMC is not present then remove it from DM */
>>>       if (!emmc && mmc_dev) {
>>> diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
>>> index 3eadc38f6fd4..6207bf8253ab 100644
>>> --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
>>> +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
>>> @@ -374,7 +374,7 @@ static bool has_emmc(void)
>>>       mmc = find_mmc_device(2);
>>>       if (!mmc)
>>>           return 0;
>>> -    return (mmc_get_op_cond(mmc) < 0) ? 0 : 1;
>>> +    return (mmc_get_op_cond(mmc, true) < 0) ? 0 : 1;
>>>   }
>>>   int checkboard(void)
>>> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
>>> index 1e83007286b2..8078a89f18cb 100644
>>> --- a/drivers/mmc/mmc.c
>>> +++ b/drivers/mmc/mmc.c
>>> @@ -2766,7 +2766,7 @@ static int mmc_power_cycle(struct mmc *mmc)
>>>       return mmc_power_on(mmc);
>>>   }
>>> -int mmc_get_op_cond(struct mmc *mmc)
>>> +int mmc_get_op_cond(struct mmc *mmc, bool quiet)
>>>   {
>>>       bool uhs_en = supports_uhs(mmc->cfg->host_caps);
>>>       int err;
>>> @@ -2842,7 +2842,8 @@ retry:
>>>           if (err) {
>>>   #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>>> -            pr_err("Card did not respond to voltage select! : %d\n", err);
>>> +            if (!quiet)
>>> +                pr_err("Card did not respond to voltage select! : %d\n", err);
>>>   #endif
>>>               return -EOPNOTSUPP;
>>>           }
>>> @@ -2882,7 +2883,7 @@ int mmc_start_init(struct mmc *mmc)
>>>           return -ENOMEDIUM;
>>>       }
>>> -    err = mmc_get_op_cond(mmc);
>>> +    err = mmc_get_op_cond(mmc, false);
>>>       if (!err)
>>>           mmc->init_in_progress = 1;
>>> diff --git a/include/mmc.h b/include/mmc.h
>>> index 6f943e78b740..0bf19de20e52 100644
>>> --- a/include/mmc.h
>>> +++ b/include/mmc.h
>>> @@ -900,9 +900,10 @@ int mmc_set_bkops_enable(struct mmc *mmc);
>>>    * the presence of SD/eMMC when no card detect logic is available.
>>>    *
>>>    * @param mmc    Pointer to a MMC device struct
>>> + * @param quiet    Be quiet, do not print error messages when card is not detected.
>>>    * @return 0 on success, <0 on error.
>>>    */
>>> -int mmc_get_op_cond(struct mmc *mmc);
>>> +int mmc_get_op_cond(struct mmc *mmc, bool quiet);
>>>   /**
>>>    * Start device initialization and return immediately; it does not block on
>>>
>>
>>
>> Viele Grüße,
>> Stefan
>>
> 
> 
> Viele Grüße,
> Stefan
> 


  reply	other threads:[~2021-07-15  8:41 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-14 14:37 [PATCH 1/3] arm: mvebu: Espressobin: Fix setting $fdtfile env Pali Rohár
2021-07-14 14:37 ` [PATCH 2/3] arm: mvebu: Espressobin: Use function mmc_get_op_cond() for detecting eMMC Pali Rohár
2021-07-15  8:02   ` Stefan Roese
2021-07-14 14:37 ` [PATCH 3/3] mmc: mmc_get_op_cond: Allow quiet detection of eMMC Pali Rohár
2021-07-15  5:39   ` Baruch Siach
2021-07-15  8:03   ` Stefan Roese
2021-07-15  8:20     ` Stefan Roese
2021-07-15  8:41       ` Jaehoon Chung [this message]
2021-07-15  8:02 ` [PATCH 1/3] arm: mvebu: Espressobin: Fix setting $fdtfile env Stefan Roese
2021-07-15 10:32 ` Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=154200cc-5ac0-b18d-59eb-f855a0ab9267@samsung.com \
    --to=jh80.chung@samsung.com \
    --cc=a.heider@gmail.com \
    --cc=baruch@tkos.co.il \
    --cc=festevam@gmail.com \
    --cc=gerald@gk2.net \
    --cc=kostap@marvell.com \
    --cc=pali@kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.