[PATCH v2 0/3] hisi_sas: DIF/DIX support

[PATCH v2 0/3] hisi_sas: DIF/DIX support

[John Garry]

This patchset introduces support to the driver for DIF/DIX (or PI -
protection information).

We will only support PI in v3 hw at the moment, even though previous hw
versions also support it.

The series is broken down as follows:
- Tidy sg table size config
- Some tidy-up to accept PI support
- Add components for PI support for main and v3 driver

Difference v1->v2:
- drop scsi_prot_op_normal()

Xiang Chen (3):
  scsi: hisi_sas: Relocate some code to reduce complexity
  scsi: hisi_sas: Make sg_tablesize consistent value
  scsi: hisi_sas: Add support for DIF/DIX feature for v3 hw

 drivers/scsi/hisi_sas/hisi_sas.h       |  18 +++
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 242 ++++++++++++++++++++++++---------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |   2 +-
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c |   2 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 192 +++++++++++++++++++++++++-
 5 files changed, 380 insertions(+), 76 deletions(-)

-- 
1.9.1

[PATCH v2 0/3] hisi_sas: DIF/DIX support

[John Garry]

This patchset introduces support to the driver for DIF/DIX (or PI -
protection information).

We will only support PI in v3 hw at the moment, even though previous hw
versions also support it.

The series is broken down as follows:
- Tidy sg table size config
- Some tidy-up to accept PI support
- Add components for PI support for main and v3 driver

Difference v1->v2:
- drop scsi_prot_op_normal()

Xiang Chen (3):
  scsi: hisi_sas: Relocate some code to reduce complexity
  scsi: hisi_sas: Make sg_tablesize consistent value
  scsi: hisi_sas: Add support for DIF/DIX feature for v3 hw

 drivers/scsi/hisi_sas/hisi_sas.h       |  18 +++
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 242 ++++++++++++++++++++++++---------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |   2 +-
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c |   2 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 192 +++++++++++++++++++++++++-
 5 files changed, 380 insertions(+), 76 deletions(-)

-- 
1.9.1

[PATCH v2 1/3] scsi: hisi_sas: Relocate some code to reduce complexity

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

Relocate the codes related to dma_map/unmap in hisi_sas_task_prep()
to reduce complexity, with a view to add DIF/DIX support.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 146 +++++++++++++++++++++-------------
 1 file changed, 90 insertions(+), 56 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 65dc749..d13a662 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -296,6 +296,90 @@ static void hisi_sas_task_prep_abort(struct hisi_hba *hisi_hba,
 			device_id, abort_flag, tag_to_abort);
 }
 
+static void hisi_sas_dma_unmap(struct hisi_hba *hisi_hba,
+			       struct sas_task *task, int n_elem,
+			       int n_elem_req, int n_elem_resp)
+{
+	struct device *dev = hisi_hba->dev;
+
+	if (!sas_protocol_ata(task->task_proto)) {
+		if (task->num_scatter) {
+			if (n_elem)
+				dma_unmap_sg(dev, task->scatter,
+					     task->num_scatter,
+					     task->data_dir);
+		} else if (task->task_proto & SAS_PROTOCOL_SMP) {
+			if (n_elem_req)
+				dma_unmap_sg(dev, &task->smp_task.smp_req,
+					     1, DMA_TO_DEVICE);
+			if (n_elem_resp)
+				dma_unmap_sg(dev, &task->smp_task.smp_resp,
+					     1, DMA_FROM_DEVICE);
+		}
+	}
+}
+
+static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
+			    struct sas_task *task, int *n_elem,
+			    int *n_elem_req, int *n_elem_resp)
+{
+	struct device *dev = hisi_hba->dev;
+	int rc;
+
+	if (sas_protocol_ata(task->task_proto)) {
+		*n_elem = task->num_scatter;
+	} else {
+		unsigned int req_len, resp_len;
+
+		if (task->num_scatter) {
+			*n_elem = dma_map_sg(dev, task->scatter,
+					     task->num_scatter, task->data_dir);
+			if (!*n_elem) {
+				rc = -ENOMEM;
+				goto prep_out;
+			}
+		} else if (task->task_proto & SAS_PROTOCOL_SMP) {
+			*n_elem_req = dma_map_sg(dev, &task->smp_task.smp_req,
+						 1, DMA_TO_DEVICE);
+			if (!*n_elem_req) {
+				rc = -ENOMEM;
+				goto prep_out;
+			}
+			req_len = sg_dma_len(&task->smp_task.smp_req);
+			if (req_len & 0x3) {
+				rc = -EINVAL;
+				goto err_out_dma_unmap;
+			}
+			*n_elem_resp = dma_map_sg(dev, &task->smp_task.smp_resp,
+						  1, DMA_FROM_DEVICE);
+			if (!*n_elem_resp) {
+				rc = -ENOMEM;
+				goto err_out_dma_unmap;
+			}
+			resp_len = sg_dma_len(&task->smp_task.smp_resp);
+			if (resp_len & 0x3) {
+				rc = -EINVAL;
+				goto err_out_dma_unmap;
+			}
+		}
+	}
+
+	if (*n_elem > HISI_SAS_SGE_PAGE_CNT) {
+		dev_err(dev, "task prep: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT",
+			*n_elem);
+		rc = -EINVAL;
+		goto err_out_dma_unmap;
+	}
+	return 0;
+
+err_out_dma_unmap:
+	/* It would be better to call dma_unmap_sg() here, but it's messy */
+	hisi_sas_dma_unmap(hisi_hba, task, *n_elem,
+			   *n_elem_req, *n_elem_resp);
+prep_out:
+	return rc;
+}
+
 static int hisi_sas_task_prep(struct sas_task *task,
 			      struct hisi_sas_dq **dq_pointer,
 			      bool is_tmf, struct hisi_sas_tmf_task *tmf,
@@ -338,49 +422,10 @@ static int hisi_sas_task_prep(struct sas_task *task,
 		return -ECOMM;
 	}
 
-	if (!sas_protocol_ata(task->task_proto)) {
-		unsigned int req_len, resp_len;
-
-		if (task->num_scatter) {
-			n_elem = dma_map_sg(dev, task->scatter,
-					    task->num_scatter, task->data_dir);
-			if (!n_elem) {
-				rc = -ENOMEM;
-				goto prep_out;
-			}
-		} else if (task->task_proto & SAS_PROTOCOL_SMP) {
-			n_elem_req = dma_map_sg(dev, &task->smp_task.smp_req,
-						1, DMA_TO_DEVICE);
-			if (!n_elem_req) {
-				rc = -ENOMEM;
-				goto prep_out;
-			}
-			req_len = sg_dma_len(&task->smp_task.smp_req);
-			if (req_len & 0x3) {
-				rc = -EINVAL;
-				goto err_out_dma_unmap;
-			}
-			n_elem_resp = dma_map_sg(dev, &task->smp_task.smp_resp,
-						 1, DMA_FROM_DEVICE);
-			if (!n_elem_resp) {
-				rc = -ENOMEM;
-				goto err_out_dma_unmap;
-			}
-			resp_len = sg_dma_len(&task->smp_task.smp_resp);
-			if (resp_len & 0x3) {
-				rc = -EINVAL;
-				goto err_out_dma_unmap;
-			}
-		}
-	} else
-		n_elem = task->num_scatter;
-
-	if (n_elem > HISI_SAS_SGE_PAGE_CNT) {
-		dev_err(dev, "task prep: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT",
-			n_elem);
-		rc = -EINVAL;
-		goto err_out_dma_unmap;
-	}
+	rc = hisi_sas_dma_map(hisi_hba, task, &n_elem,
+			      &n_elem_req, &n_elem_resp);
+	if (rc < 0)
+		goto prep_out;
 
 	if (hisi_hba->hw->slot_index_alloc)
 		rc = hisi_hba->hw->slot_index_alloc(hisi_hba, device);
@@ -465,19 +510,8 @@ static int hisi_sas_task_prep(struct sas_task *task,
 err_out_tag:
 	hisi_sas_slot_index_free(hisi_hba, slot_idx);
 err_out_dma_unmap:
-	if (!sas_protocol_ata(task->task_proto)) {
-		if (task->num_scatter) {
-			dma_unmap_sg(dev, task->scatter, task->num_scatter,
-			     task->data_dir);
-		} else if (task->task_proto & SAS_PROTOCOL_SMP) {
-			if (n_elem_req)
-				dma_unmap_sg(dev, &task->smp_task.smp_req,
-					     1, DMA_TO_DEVICE);
-			if (n_elem_resp)
-				dma_unmap_sg(dev, &task->smp_task.smp_resp,
-					     1, DMA_FROM_DEVICE);
-		}
-	}
+	hisi_sas_dma_unmap(hisi_hba, task, n_elem,
+			   n_elem_req, n_elem_resp);
 prep_out:
 	dev_err(dev, "task prep: failed[%d]!\n", rc);
 	return rc;
-- 
1.9.1

[PATCH v2 1/3] scsi: hisi_sas: Relocate some code to reduce complexity

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

Relocate the codes related to dma_map/unmap in hisi_sas_task_prep()
to reduce complexity, with a view to add DIF/DIX support.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 146 +++++++++++++++++++++-------------
 1 file changed, 90 insertions(+), 56 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 65dc749..d13a662 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -296,6 +296,90 @@ static void hisi_sas_task_prep_abort(struct hisi_hba *hisi_hba,
 			device_id, abort_flag, tag_to_abort);
 }
 
+static void hisi_sas_dma_unmap(struct hisi_hba *hisi_hba,
+			       struct sas_task *task, int n_elem,
+			       int n_elem_req, int n_elem_resp)
+{
+	struct device *dev = hisi_hba->dev;
+
+	if (!sas_protocol_ata(task->task_proto)) {
+		if (task->num_scatter) {
+			if (n_elem)
+				dma_unmap_sg(dev, task->scatter,
+					     task->num_scatter,
+					     task->data_dir);
+		} else if (task->task_proto & SAS_PROTOCOL_SMP) {
+			if (n_elem_req)
+				dma_unmap_sg(dev, &task->smp_task.smp_req,
+					     1, DMA_TO_DEVICE);
+			if (n_elem_resp)
+				dma_unmap_sg(dev, &task->smp_task.smp_resp,
+					     1, DMA_FROM_DEVICE);
+		}
+	}
+}
+
+static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
+			    struct sas_task *task, int *n_elem,
+			    int *n_elem_req, int *n_elem_resp)
+{
+	struct device *dev = hisi_hba->dev;
+	int rc;
+
+	if (sas_protocol_ata(task->task_proto)) {
+		*n_elem = task->num_scatter;
+	} else {
+		unsigned int req_len, resp_len;
+
+		if (task->num_scatter) {
+			*n_elem = dma_map_sg(dev, task->scatter,
+					     task->num_scatter, task->data_dir);
+			if (!*n_elem) {
+				rc = -ENOMEM;
+				goto prep_out;
+			}
+		} else if (task->task_proto & SAS_PROTOCOL_SMP) {
+			*n_elem_req = dma_map_sg(dev, &task->smp_task.smp_req,
+						 1, DMA_TO_DEVICE);
+			if (!*n_elem_req) {
+				rc = -ENOMEM;
+				goto prep_out;
+			}
+			req_len = sg_dma_len(&task->smp_task.smp_req);
+			if (req_len & 0x3) {
+				rc = -EINVAL;
+				goto err_out_dma_unmap;
+			}
+			*n_elem_resp = dma_map_sg(dev, &task->smp_task.smp_resp,
+						  1, DMA_FROM_DEVICE);
+			if (!*n_elem_resp) {
+				rc = -ENOMEM;
+				goto err_out_dma_unmap;
+			}
+			resp_len = sg_dma_len(&task->smp_task.smp_resp);
+			if (resp_len & 0x3) {
+				rc = -EINVAL;
+				goto err_out_dma_unmap;
+			}
+		}
+	}
+
+	if (*n_elem > HISI_SAS_SGE_PAGE_CNT) {
+		dev_err(dev, "task prep: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT",
+			*n_elem);
+		rc = -EINVAL;
+		goto err_out_dma_unmap;
+	}
+	return 0;
+
+err_out_dma_unmap:
+	/* It would be better to call dma_unmap_sg() here, but it's messy */
+	hisi_sas_dma_unmap(hisi_hba, task, *n_elem,
+			   *n_elem_req, *n_elem_resp);
+prep_out:
+	return rc;
+}
+
 static int hisi_sas_task_prep(struct sas_task *task,
 			      struct hisi_sas_dq **dq_pointer,
 			      bool is_tmf, struct hisi_sas_tmf_task *tmf,
@@ -338,49 +422,10 @@ static int hisi_sas_task_prep(struct sas_task *task,
 		return -ECOMM;
 	}
 
-	if (!sas_protocol_ata(task->task_proto)) {
-		unsigned int req_len, resp_len;
-
-		if (task->num_scatter) {
-			n_elem = dma_map_sg(dev, task->scatter,
-					    task->num_scatter, task->data_dir);
-			if (!n_elem) {
-				rc = -ENOMEM;
-				goto prep_out;
-			}
-		} else if (task->task_proto & SAS_PROTOCOL_SMP) {
-			n_elem_req = dma_map_sg(dev, &task->smp_task.smp_req,
-						1, DMA_TO_DEVICE);
-			if (!n_elem_req) {
-				rc = -ENOMEM;
-				goto prep_out;
-			}
-			req_len = sg_dma_len(&task->smp_task.smp_req);
-			if (req_len & 0x3) {
-				rc = -EINVAL;
-				goto err_out_dma_unmap;
-			}
-			n_elem_resp = dma_map_sg(dev, &task->smp_task.smp_resp,
-						 1, DMA_FROM_DEVICE);
-			if (!n_elem_resp) {
-				rc = -ENOMEM;
-				goto err_out_dma_unmap;
-			}
-			resp_len = sg_dma_len(&task->smp_task.smp_resp);
-			if (resp_len & 0x3) {
-				rc = -EINVAL;
-				goto err_out_dma_unmap;
-			}
-		}
-	} else
-		n_elem = task->num_scatter;
-
-	if (n_elem > HISI_SAS_SGE_PAGE_CNT) {
-		dev_err(dev, "task prep: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT",
-			n_elem);
-		rc = -EINVAL;
-		goto err_out_dma_unmap;
-	}
+	rc = hisi_sas_dma_map(hisi_hba, task, &n_elem,
+			      &n_elem_req, &n_elem_resp);
+	if (rc < 0)
+		goto prep_out;
 
 	if (hisi_hba->hw->slot_index_alloc)
 		rc = hisi_hba->hw->slot_index_alloc(hisi_hba, device);
@@ -465,19 +510,8 @@ static int hisi_sas_task_prep(struct sas_task *task,
 err_out_tag:
 	hisi_sas_slot_index_free(hisi_hba, slot_idx);
 err_out_dma_unmap:
-	if (!sas_protocol_ata(task->task_proto)) {
-		if (task->num_scatter) {
-			dma_unmap_sg(dev, task->scatter, task->num_scatter,
-			     task->data_dir);
-		} else if (task->task_proto & SAS_PROTOCOL_SMP) {
-			if (n_elem_req)
-				dma_unmap_sg(dev, &task->smp_task.smp_req,
-					     1, DMA_TO_DEVICE);
-			if (n_elem_resp)
-				dma_unmap_sg(dev, &task->smp_task.smp_resp,
-					     1, DMA_FROM_DEVICE);
-		}
-	}
+	hisi_sas_dma_unmap(hisi_hba, task, n_elem,
+			   n_elem_req, n_elem_resp);
 prep_out:
 	dev_err(dev, "task prep: failed[%d]!\n", rc);
 	return rc;
-- 
1.9.1

[PATCH v2 2/3] scsi: hisi_sas: Make sg_tablesize consistent value

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

Sht->sg_tablesize is set in the driver, and it will be assigned to
shost->sg_tablesize in SCSI mid-layer. So it is not necessary to
assign shost->sg_table one more time in the driver.

In addition to the change, change each scsi_host_template.sg_tablesize
to HISI_SAS_SGE_PAGE_CNT instead of SG_ALL.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 1 -
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +-
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 +--
 4 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d13a662..cbda48e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -2410,7 +2410,6 @@ int hisi_sas_probe(struct platform_device *pdev,
 	shost->max_lun = ~0;
 	shost->max_channel = 1;
 	shost->max_cmd_len = 16;
-	shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
 	if (hisi_hba->hw->slot_index_alloc) {
 		shost->can_queue = hisi_hba->hw->max_command_entries;
 		shost->cmd_per_lun = hisi_hba->hw->max_command_entries;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index d24342b..2d035cc 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1815,7 +1815,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e78a97e..79e58a7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3570,7 +3570,7 @@ struct device_attribute *host_attrs_v2_hw[] = {
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 7e2b020..8a08078 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2224,7 +2224,7 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
@@ -2366,7 +2366,6 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	shost->max_lun = ~0;
 	shost->max_channel = 1;
 	shost->max_cmd_len = 16;
-	shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
 	shost->can_queue = hisi_hba->hw->max_command_entries -
 		HISI_SAS_RESERVED_IPTT_CNT;
 	shost->cmd_per_lun = hisi_hba->hw->max_command_entries -
-- 
1.9.1

[PATCH v2 2/3] scsi: hisi_sas: Make sg_tablesize consistent value

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

Sht->sg_tablesize is set in the driver, and it will be assigned to
shost->sg_tablesize in SCSI mid-layer. So it is not necessary to
assign shost->sg_table one more time in the driver.

In addition to the change, change each scsi_host_template.sg_tablesize
to HISI_SAS_SGE_PAGE_CNT instead of SG_ALL.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 1 -
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +-
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 +--
 4 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d13a662..cbda48e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -2410,7 +2410,6 @@ int hisi_sas_probe(struct platform_device *pdev,
 	shost->max_lun = ~0;
 	shost->max_channel = 1;
 	shost->max_cmd_len = 16;
-	shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
 	if (hisi_hba->hw->slot_index_alloc) {
 		shost->can_queue = hisi_hba->hw->max_command_entries;
 		shost->cmd_per_lun = hisi_hba->hw->max_command_entries;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index d24342b..2d035cc 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1815,7 +1815,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e78a97e..79e58a7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3570,7 +3570,7 @@ struct device_attribute *host_attrs_v2_hw[] = {
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 7e2b020..8a08078 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2224,7 +2224,7 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
@@ -2366,7 +2366,6 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	shost->max_lun = ~0;
 	shost->max_channel = 1;
 	shost->max_cmd_len = 16;
-	shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
 	shost->can_queue = hisi_hba->hw->max_command_entries -
 		HISI_SAS_RESERVED_IPTT_CNT;
 	shost->cmd_per_lun = hisi_hba->hw->max_command_entries -
-- 
1.9.1

[PATCH v2 3/3] scsi: hisi_sas: Add support for DIF/DIX feature for v3 hw

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

For v3 hw, we support DIF/DIX operation for SAS, but not SATA.

In addition, DIF CRC16 is supported.

This patchset adds the SW support for the described features. The main
components are as follows:
- Allocate memory for PI
- Fill PI fields
- Fill related to DIF/DIX in DQ and protection iu memories

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  18 ++++
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  99 ++++++++++++++---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 189 ++++++++++++++++++++++++++++++++-
 3 files changed, 289 insertions(+), 17 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 535c613..a73aad6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -55,6 +55,11 @@
 #define hisi_sas_sge_addr_mem(slot) hisi_sas_sge_addr(slot->buf)
 #define hisi_sas_sge_addr_dma(slot) hisi_sas_sge_addr(slot->buf_dma)
 
+#define hisi_sas_sge_dif_addr(buf) \
+	(buf + offsetof(struct hisi_sas_slot_dif_buf_table, sge_dif_page))
+#define hisi_sas_sge_dif_addr_mem(slot) hisi_sas_sge_dif_addr(slot->buf)
+#define hisi_sas_sge_dif_addr_dma(slot) hisi_sas_sge_dif_addr(slot->buf_dma)
+
 #define HISI_SAS_MAX_SSP_RESP_SZ (sizeof(struct ssp_frame_hdr) + 1024)
 #define HISI_SAS_MAX_SMP_RESP_SZ 1028
 #define HISI_SAS_MAX_STP_RESP_SZ 28
@@ -197,6 +202,7 @@ struct hisi_sas_slot {
 	struct sas_task *task;
 	struct hisi_sas_port	*port;
 	u64	n_elem;
+	u64	n_elem_dif;
 	int	dlvry_queue;
 	int	dlvry_queue_slot;
 	int	cmplt_queue;
@@ -268,6 +274,8 @@ struct hisi_hba {
 	struct pci_dev *pci_dev;
 	struct device *dev;
 
+	bool enable_dif_dix;
+
 	void __iomem *regs;
 	void __iomem *sgpio_regs;
 	struct regmap *ctrl;
@@ -422,6 +430,11 @@ struct hisi_sas_sge_page {
 	struct hisi_sas_sge sge[HISI_SAS_SGE_PAGE_CNT];
 }  __aligned(16);
 
+#define HISI_SAS_SGE_DIF_PAGE_CNT   SG_CHUNK_SIZE
+struct hisi_sas_sge_dif_page {
+	struct hisi_sas_sge sge[HISI_SAS_SGE_DIF_PAGE_CNT];
+}  __aligned(16);
+
 struct hisi_sas_command_table_ssp {
 	struct ssp_frame_hdr hdr;
 	union {
@@ -452,6 +465,11 @@ struct hisi_sas_slot_buf_table {
 	struct hisi_sas_sge_page sge_page;
 };
 
+struct hisi_sas_slot_dif_buf_table {
+	struct hisi_sas_slot_buf_table slot_buf;
+	struct hisi_sas_sge_dif_page sge_dif_page;
+};
+
 extern struct scsi_transport_template *hisi_sas_stt;
 extern void hisi_sas_stop_phys(struct hisi_hba *hisi_hba);
 extern int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index cbda48e..d0b693b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -252,14 +252,21 @@ void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
 
 		task->lldd_task = NULL;
 
-		if (!sas_protocol_ata(task->task_proto))
+		if (!sas_protocol_ata(task->task_proto)) {
+			struct sas_ssp_task *ssp_task = &task->ssp_task;
+			struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
+
 			if (slot->n_elem)
 				dma_unmap_sg(dev, task->scatter,
 					     task->num_scatter,
 					     task->data_dir);
+			if (slot->n_elem_dif)
+				dma_unmap_sg(dev, scsi_prot_sglist(scsi_cmnd),
+					     scsi_prot_sg_count(scsi_cmnd),
+					     task->data_dir);
+		}
 	}
 
-
 	spin_lock_irqsave(&dq->lock, flags);
 	list_del_init(&slot->entry);
 	spin_unlock_irqrestore(&dq->lock, flags);
@@ -380,6 +387,59 @@ static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
 	return rc;
 }
 
+static void hisi_sas_dif_dma_unmap(struct hisi_hba *hisi_hba,
+				   struct sas_task *task, int n_elem_dif)
+{
+	struct device *dev = hisi_hba->dev;
+
+	if (n_elem_dif) {
+		struct sas_ssp_task *ssp_task = &task->ssp_task;
+		struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
+
+		dma_unmap_sg(dev, scsi_prot_sglist(scsi_cmnd),
+			     scsi_prot_sg_count(scsi_cmnd),
+			     task->data_dir);
+	}
+}
+
+static int hisi_sas_dif_dma_map(struct hisi_hba *hisi_hba,
+				int *n_elem_dif, struct sas_task *task)
+{
+	struct device *dev = hisi_hba->dev;
+	struct sas_ssp_task *ssp_task;
+	struct scsi_cmnd *scsi_cmnd;
+	int rc;
+
+	if (task->num_scatter) {
+		ssp_task = &task->ssp_task;
+		scsi_cmnd = ssp_task->cmd;
+
+		if (scsi_prot_sg_count(scsi_cmnd)) {
+			*n_elem_dif = dma_map_sg(dev,
+						 scsi_prot_sglist(scsi_cmnd),
+						 scsi_prot_sg_count(scsi_cmnd),
+						 task->data_dir);
+
+			if (!*n_elem_dif)
+				return -ENOMEM;
+
+			if (*n_elem_dif > HISI_SAS_SGE_DIF_PAGE_CNT) {
+				dev_err(dev, "task prep: n_elem_dif(%d) too large\n",
+					*n_elem_dif);
+				rc = -EINVAL;
+				goto err_out_dif_dma_unmap;
+			}
+		}
+	}
+
+	return 0;
+
+err_out_dif_dma_unmap:
+	dma_unmap_sg(dev, scsi_prot_sglist(scsi_cmnd),
+		     scsi_prot_sg_count(scsi_cmnd), task->data_dir);
+	return rc;
+}
+
 static int hisi_sas_task_prep(struct sas_task *task,
 			      struct hisi_sas_dq **dq_pointer,
 			      bool is_tmf, struct hisi_sas_tmf_task *tmf,
@@ -394,7 +454,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	struct asd_sas_port *sas_port = device->port;
 	struct device *dev = hisi_hba->dev;
 	int dlvry_queue_slot, dlvry_queue, rc, slot_idx;
-	int n_elem = 0, n_elem_req = 0, n_elem_resp = 0;
+	int n_elem = 0, n_elem_dif = 0, n_elem_req = 0, n_elem_resp = 0;
 	struct hisi_sas_dq *dq;
 	unsigned long flags;
 	int wr_q_index;
@@ -427,6 +487,12 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	if (rc < 0)
 		goto prep_out;
 
+	if (!sas_protocol_ata(task->task_proto)) {
+		rc = hisi_sas_dif_dma_map(hisi_hba, &n_elem_dif, task);
+		if (rc < 0)
+			goto err_out_dma_unmap;
+	}
+
 	if (hisi_hba->hw->slot_index_alloc)
 		rc = hisi_hba->hw->slot_index_alloc(hisi_hba, device);
 	else {
@@ -445,7 +511,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 		rc  = hisi_sas_slot_index_alloc(hisi_hba, scsi_cmnd);
 	}
 	if (rc < 0)
-		goto err_out_dma_unmap;
+		goto err_out_dif_dma_unmap;
 
 	slot_idx = rc;
 	slot = &hisi_hba->slot_info[slot_idx];
@@ -466,6 +532,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	dlvry_queue_slot = wr_q_index;
 
 	slot->n_elem = n_elem;
+	slot->n_elem_dif = n_elem_dif;
 	slot->dlvry_queue = dlvry_queue;
 	slot->dlvry_queue_slot = dlvry_queue_slot;
 	cmd_hdr_base = hisi_hba->cmd_hdr[dlvry_queue];
@@ -509,6 +576,9 @@ static int hisi_sas_task_prep(struct sas_task *task,
 
 err_out_tag:
 	hisi_sas_slot_index_free(hisi_hba, slot_idx);
+err_out_dif_dma_unmap:
+	if (!sas_protocol_ata(task->task_proto))
+		hisi_sas_dif_dma_unmap(hisi_hba, task, n_elem_dif);
 err_out_dma_unmap:
 	hisi_sas_dma_unmap(hisi_hba, task, n_elem,
 			   n_elem_req, n_elem_resp);
@@ -2142,21 +2212,26 @@ int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
 	if (!hisi_hba->slot_info)
 		goto err_out;
 
-	/* roundup to avoid overly large block size */
+	/* roundup to avoid an overly large block size */
 	max_command_entries_ru = roundup(max_command_entries, 64);
-	sz_slot_buf_ru = roundup(sizeof(struct hisi_sas_slot_buf_table), 64);
+	if (hisi_hba->enable_dif_dix)
+		sz_slot_buf_ru = sizeof(struct hisi_sas_slot_dif_buf_table);
+	else
+		sz_slot_buf_ru = sizeof(struct hisi_sas_slot_buf_table);
+	sz_slot_buf_ru = roundup(sz_slot_buf_ru, 64);
 	s = lcm(max_command_entries_ru, sz_slot_buf_ru);
 	blk_cnt = (max_command_entries_ru * sz_slot_buf_ru) / s;
 	slots_per_blk = s / sz_slot_buf_ru;
+
 	for (i = 0; i < blk_cnt; i++) {
-		struct hisi_sas_slot_buf_table *buf;
-		dma_addr_t buf_dma;
 		int slot_index = i * slots_per_blk;
+		dma_addr_t buf_dma;
+		void *buf;
 
-		buf = dmam_alloc_coherent(dev, s, &buf_dma, GFP_KERNEL);
+		buf = dmam_alloc_coherent(dev, s, &buf_dma,
+					  GFP_KERNEL | __GFP_ZERO);
 		if (!buf)
 			goto err_out;
-		memset(buf, 0, s);
 
 		for (j = 0; j < slots_per_blk; j++, slot_index++) {
 			struct hisi_sas_slot *slot;
@@ -2166,8 +2241,8 @@ int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
 			slot->buf_dma = buf_dma;
 			slot->idx = slot_index;
 
-			buf++;
-			buf_dma += sizeof(*buf);
+			buf += sz_slot_buf_ru;
+			buf_dma += sz_slot_buf_ru;
 		}
 	}
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 8a08078..c03562b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -127,6 +127,8 @@
 #define PHY_CTRL			(PORT_BASE + 0x14)
 #define PHY_CTRL_RESET_OFF		0
 #define PHY_CTRL_RESET_MSK		(0x1 << PHY_CTRL_RESET_OFF)
+#define CMD_HDR_PIR_OFF			8
+#define CMD_HDR_PIR_MSK			(0x1 << CMD_HDR_PIR_OFF)
 #define SL_CFG				(PORT_BASE + 0x84)
 #define AIP_LIMIT			(PORT_BASE + 0x90)
 #define SL_CONTROL			(PORT_BASE + 0x94)
@@ -333,6 +335,16 @@
 #define ITCT_HDR_RTOLT_OFF		48
 #define ITCT_HDR_RTOLT_MSK		(0xffffULL << ITCT_HDR_RTOLT_OFF)
 
+struct hisi_sas_protect_iu_v3_hw {
+	u32 dw0;
+	u32 lbrtcv;
+	u32 lbrtgv;
+	u32 dw3;
+	u32 dw4;
+	u32 dw5;
+	u32 rsv;
+};
+
 struct hisi_sas_complete_v3_hdr {
 	__le32 dw0;
 	__le32 dw1;
@@ -372,9 +384,27 @@ struct hisi_sas_err_record_v3 {
 	((fis.command == ATA_CMD_DEV_RESET) && \
 	((fis.control & ATA_SRST) != 0)))
 
+#define T10_INSRT_EN_OFF    0
+#define T10_INSRT_EN_MSK    (1 << T10_INSRT_EN_OFF)
+#define T10_RMV_EN_OFF	    1
+#define T10_RMV_EN_MSK	    (1 << T10_RMV_EN_OFF)
+#define T10_RPLC_EN_OFF	    2
+#define T10_RPLC_EN_MSK	    (1 << T10_RPLC_EN_OFF)
+#define T10_CHK_EN_OFF	    3
+#define T10_CHK_EN_MSK	    (1 << T10_CHK_EN_OFF)
+#define INCR_LBRT_OFF	    5
+#define INCR_LBRT_MSK	    (1 << INCR_LBRT_OFF)
+#define USR_DATA_BLOCK_SZ_OFF	20
+#define USR_DATA_BLOCK_SZ_MSK	(0x3 << USR_DATA_BLOCK_SZ_OFF)
+#define T10_CHK_MSK_OFF	    16
+
 static bool hisi_sas_intr_conv;
 MODULE_PARM_DESC(intr_conv, "interrupt converge enable (0-1)");
 
+static bool enable_dif_dix;
+module_param(enable_dif_dix, bool, 0444);
+MODULE_PARM_DESC(enable_dif_dix, "DIF/DIX enable (0-1)");
+
 static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
 {
 	void __iomem *regs = hisi_hba->regs + off;
@@ -937,7 +967,107 @@ static void prep_prd_sge_v3_hw(struct hisi_hba *hisi_hba,
 
 	hdr->prd_table_addr = cpu_to_le64(hisi_sas_sge_addr_dma(slot));
 
-	hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
+	hdr->sg_len |= cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
+}
+
+static void prep_prd_sge_dif_v3_hw(struct hisi_hba *hisi_hba,
+				  struct hisi_sas_slot *slot,
+				  struct hisi_sas_cmd_hdr *hdr,
+				  struct scatterlist *scatter,
+				  int n_elem)
+{
+	struct hisi_sas_sge_dif_page *sge_dif_page;
+	struct scatterlist *sg;
+	int i;
+
+	sge_dif_page = hisi_sas_sge_dif_addr_mem(slot);
+
+	for_each_sg(scatter, sg, n_elem, i) {
+		struct hisi_sas_sge *entry = &sge_dif_page->sge[i];
+
+		entry->addr = cpu_to_le64(sg_dma_address(sg));
+		entry->page_ctrl_0 = entry->page_ctrl_1 = 0;
+		entry->data_len = cpu_to_le32(sg_dma_len(sg));
+		entry->data_off = 0;
+	}
+
+	hdr->dif_prd_table_addr = cpu_to_le64(
+			hisi_sas_sge_dif_addr_dma(slot));
+
+	hdr->sg_len |= cpu_to_le32(n_elem << CMD_HDR_DIF_SGL_LEN_OFF);
+}
+
+static void fill_prot_v3_hw(struct scsi_cmnd *scsi_cmnd,
+			    struct hisi_sas_protect_iu_v3_hw *prot)
+{
+	u8 prot_type = scsi_get_prot_type(scsi_cmnd);
+	u8 prot_op = scsi_get_prot_op(scsi_cmnd);
+	unsigned int interval = scsi_prot_interval(scsi_cmnd);
+	u32 lbrt_chk_val;
+
+	if (interval == 4096)
+		lbrt_chk_val = (u32)(scsi_get_lba(scsi_cmnd) >> 3);
+	else
+		lbrt_chk_val = (u32)scsi_get_lba(scsi_cmnd);
+
+	switch (prot_op) {
+	case SCSI_PROT_READ_INSERT:
+		prot->dw0 |= T10_INSRT_EN_MSK;
+		prot->lbrtgv = lbrt_chk_val;
+		break;
+	case SCSI_PROT_READ_STRIP:
+		prot->dw0 |= (T10_RMV_EN_MSK | T10_CHK_EN_MSK);
+		prot->lbrtcv = lbrt_chk_val;
+		if (prot_type == SCSI_PROT_DIF_TYPE1)
+			prot->dw4 |= (0xc << 16);
+		else if (prot_type == SCSI_PROT_DIF_TYPE3)
+			prot->dw4 |= (0xfc << 16);
+		break;
+	case SCSI_PROT_READ_PASS:
+		prot->dw0 |= T10_CHK_EN_MSK;
+		prot->lbrtcv = lbrt_chk_val;
+		if (prot_type == SCSI_PROT_DIF_TYPE1)
+			prot->dw4 |= (0xc << 16);
+		else if (prot_type == SCSI_PROT_DIF_TYPE3)
+			prot->dw4 |= (0xfc << 16);
+		break;
+	case SCSI_PROT_WRITE_INSERT:
+		prot->dw0 |= T10_INSRT_EN_MSK;
+		prot->lbrtgv = lbrt_chk_val;
+		break;
+	case SCSI_PROT_WRITE_STRIP:
+		prot->dw0 |= (T10_RMV_EN_MSK | T10_CHK_EN_MSK);
+		prot->lbrtcv = lbrt_chk_val;
+		break;
+	case SCSI_PROT_WRITE_PASS:
+		prot->dw0 |= T10_CHK_EN_MSK;
+		prot->lbrtcv = lbrt_chk_val;
+		if (prot_type == SCSI_PROT_DIF_TYPE1)
+			prot->dw4 |= (0xc << 16);
+		else if (prot_type == SCSI_PROT_DIF_TYPE3)
+			prot->dw4 |= (0xfc << 16);
+		break;
+	default:
+		WARN(1, "prot_op(0x%x) is not valid\n", prot_op);
+		break;
+	}
+
+	switch (interval) {
+	case 512:
+		break;
+	case 4096:
+		prot->dw0 |= (0x1 << USR_DATA_BLOCK_SZ_OFF);
+		break;
+	case 520:
+		prot->dw0 |= (0x2 << USR_DATA_BLOCK_SZ_OFF);
+		break;
+	default:
+		WARN(1, "protection interval (0x%x) invalid\n",
+		     interval);
+		break;
+	}
+
+	prot->dw0 |= INCR_LBRT_MSK;
 }
 
 static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
@@ -951,9 +1081,10 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	struct sas_ssp_task *ssp_task = &task->ssp_task;
 	struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
 	struct hisi_sas_tmf_task *tmf = slot->tmf;
+	unsigned char prot_op = scsi_get_prot_op(scsi_cmnd);
 	int has_data = 0, priority = !!tmf;
 	u8 *buf_cmd;
-	u32 dw1 = 0, dw2 = 0;
+	u32 dw1 = 0, dw2 = 0, len = 0;
 
 	hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) |
 			       (2 << CMD_HDR_TLR_CTRL_OFF) |
@@ -992,11 +1123,16 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	hdr->dw2 = cpu_to_le32(dw2);
 	hdr->transfer_tags = cpu_to_le32(slot->idx);
 
-	if (has_data)
+	if (has_data) {
 		prep_prd_sge_v3_hw(hisi_hba, slot, hdr, task->scatter,
-					slot->n_elem);
+				   slot->n_elem);
+
+		if (scsi_prot_sg_count(scsi_cmnd))
+			prep_prd_sge_dif_v3_hw(hisi_hba, slot, hdr,
+					       scsi_prot_sglist(scsi_cmnd),
+					       slot->n_elem_dif);
+	}
 
-	hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
 	hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
 	hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
 
@@ -1021,6 +1157,34 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 			break;
 		}
 	}
+
+	if (has_data && (prot_op != SCSI_PROT_NORMAL)) {
+		struct hisi_sas_protect_iu_v3_hw prot;
+		u8 *buf_cmd_prot;
+
+		hdr->dw7 |= 1 << CMD_HDR_ADDR_MODE_SEL_OFF;
+		hdr->dw1 |= CMD_HDR_PIR_MSK;
+		buf_cmd_prot = hisi_sas_cmd_hdr_addr_mem(slot) +
+			       sizeof(struct ssp_frame_hdr) +
+			       sizeof(struct ssp_command_iu);
+
+		memset(&prot, 0, sizeof(struct hisi_sas_protect_iu_v3_hw));
+		fill_prot_v3_hw(scsi_cmnd, &prot);
+		memcpy(buf_cmd_prot, &prot,
+		       sizeof(struct hisi_sas_protect_iu_v3_hw));
+
+		if ((prot_op == SCSI_PROT_READ_INSERT) ||
+		    (prot_op == SCSI_PROT_WRITE_INSERT) ||
+		    (prot_op == SCSI_PROT_WRITE_PASS) ||
+		    (prot_op == SCSI_PROT_READ_PASS)) {
+			unsigned int interval = scsi_prot_interval(scsi_cmnd);
+			unsigned int ilog2_interval = ilog2(interval);
+
+			len = (task->total_xfer_len >> ilog2_interval) * 8;
+		}
+	}
+
+	hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len + len);
 }
 
 static void prep_smp_v3_hw(struct hisi_hba *hisi_hba,
@@ -2225,6 +2389,7 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
 	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
+	.sg_prot_tablesize	= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
@@ -2284,6 +2449,7 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	hisi_hba->dev = dev;
 	hisi_hba->shost = shost;
 	SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+	hisi_hba->enable_dif_dix = enable_dif_dix;
 
 	timer_setup(&hisi_hba->timer, NULL, 0);
 
@@ -2395,6 +2561,19 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	if (rc)
 		goto err_out_register_ha;
 
+	if (hisi_hba->enable_dif_dix) {
+		dev_info(dev, "Registering for DIF/DIX type 1/2/3 protection.\n");
+		scsi_host_set_prot(hisi_hba->shost,
+				   SHOST_DIF_TYPE1_PROTECTION |
+				   SHOST_DIF_TYPE2_PROTECTION |
+				   SHOST_DIF_TYPE3_PROTECTION |
+				   SHOST_DIX_TYPE1_PROTECTION |
+				   SHOST_DIX_TYPE2_PROTECTION |
+				   SHOST_DIX_TYPE3_PROTECTION);
+		scsi_host_set_guard(hisi_hba->shost,
+				    SHOST_DIX_GUARD_CRC);
+	}
+
 	scsi_scan_host(shost);
 
 	return 0;
-- 
1.9.1

[PATCH v2 3/3] scsi: hisi_sas: Add support for DIF/DIX feature for v3 hw

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

For v3 hw, we support DIF/DIX operation for SAS, but not SATA.

In addition, DIF CRC16 is supported.

This patchset adds the SW support for the described features. The main
components are as follows:
- Allocate memory for PI
- Fill PI fields
- Fill related to DIF/DIX in DQ and protection iu memories

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  18 ++++
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  99 ++++++++++++++---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 189 ++++++++++++++++++++++++++++++++-
 3 files changed, 289 insertions(+), 17 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 535c613..a73aad6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -55,6 +55,11 @@
 #define hisi_sas_sge_addr_mem(slot) hisi_sas_sge_addr(slot->buf)
 #define hisi_sas_sge_addr_dma(slot) hisi_sas_sge_addr(slot->buf_dma)
 
+#define hisi_sas_sge_dif_addr(buf) \
+	(buf + offsetof(struct hisi_sas_slot_dif_buf_table, sge_dif_page))
+#define hisi_sas_sge_dif_addr_mem(slot) hisi_sas_sge_dif_addr(slot->buf)
+#define hisi_sas_sge_dif_addr_dma(slot) hisi_sas_sge_dif_addr(slot->buf_dma)
+
 #define HISI_SAS_MAX_SSP_RESP_SZ (sizeof(struct ssp_frame_hdr) + 1024)
 #define HISI_SAS_MAX_SMP_RESP_SZ 1028
 #define HISI_SAS_MAX_STP_RESP_SZ 28
@@ -197,6 +202,7 @@ struct hisi_sas_slot {
 	struct sas_task *task;
 	struct hisi_sas_port	*port;
 	u64	n_elem;
+	u64	n_elem_dif;
 	int	dlvry_queue;
 	int	dlvry_queue_slot;
 	int	cmplt_queue;
@@ -268,6 +274,8 @@ struct hisi_hba {
 	struct pci_dev *pci_dev;
 	struct device *dev;
 
+	bool enable_dif_dix;
+
 	void __iomem *regs;
 	void __iomem *sgpio_regs;
 	struct regmap *ctrl;
@@ -422,6 +430,11 @@ struct hisi_sas_sge_page {
 	struct hisi_sas_sge sge[HISI_SAS_SGE_PAGE_CNT];
 }  __aligned(16);
 
+#define HISI_SAS_SGE_DIF_PAGE_CNT   SG_CHUNK_SIZE
+struct hisi_sas_sge_dif_page {
+	struct hisi_sas_sge sge[HISI_SAS_SGE_DIF_PAGE_CNT];
+}  __aligned(16);
+
 struct hisi_sas_command_table_ssp {
 	struct ssp_frame_hdr hdr;
 	union {
@@ -452,6 +465,11 @@ struct hisi_sas_slot_buf_table {
 	struct hisi_sas_sge_page sge_page;
 };
 
+struct hisi_sas_slot_dif_buf_table {
+	struct hisi_sas_slot_buf_table slot_buf;
+	struct hisi_sas_sge_dif_page sge_dif_page;
+};
+
 extern struct scsi_transport_template *hisi_sas_stt;
 extern void hisi_sas_stop_phys(struct hisi_hba *hisi_hba);
 extern int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index cbda48e..d0b693b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -252,14 +252,21 @@ void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
 
 		task->lldd_task = NULL;
 
-		if (!sas_protocol_ata(task->task_proto))
+		if (!sas_protocol_ata(task->task_proto)) {
+			struct sas_ssp_task *ssp_task = &task->ssp_task;
+			struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
+
 			if (slot->n_elem)
 				dma_unmap_sg(dev, task->scatter,
 					     task->num_scatter,
 					     task->data_dir);
+			if (slot->n_elem_dif)
+				dma_unmap_sg(dev, scsi_prot_sglist(scsi_cmnd),
+					     scsi_prot_sg_count(scsi_cmnd),
+					     task->data_dir);
+		}
 	}
 
-
 	spin_lock_irqsave(&dq->lock, flags);
 	list_del_init(&slot->entry);
 	spin_unlock_irqrestore(&dq->lock, flags);
@@ -380,6 +387,59 @@ static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
 	return rc;
 }
 
+static void hisi_sas_dif_dma_unmap(struct hisi_hba *hisi_hba,
+				   struct sas_task *task, int n_elem_dif)
+{
+	struct device *dev = hisi_hba->dev;
+
+	if (n_elem_dif) {
+		struct sas_ssp_task *ssp_task = &task->ssp_task;
+		struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
+
+		dma_unmap_sg(dev, scsi_prot_sglist(scsi_cmnd),
+			     scsi_prot_sg_count(scsi_cmnd),
+			     task->data_dir);
+	}
+}
+
+static int hisi_sas_dif_dma_map(struct hisi_hba *hisi_hba,
+				int *n_elem_dif, struct sas_task *task)
+{
+	struct device *dev = hisi_hba->dev;
+	struct sas_ssp_task *ssp_task;
+	struct scsi_cmnd *scsi_cmnd;
+	int rc;
+
+	if (task->num_scatter) {
+		ssp_task = &task->ssp_task;
+		scsi_cmnd = ssp_task->cmd;
+
+		if (scsi_prot_sg_count(scsi_cmnd)) {
+			*n_elem_dif = dma_map_sg(dev,
+						 scsi_prot_sglist(scsi_cmnd),
+						 scsi_prot_sg_count(scsi_cmnd),
+						 task->data_dir);
+
+			if (!*n_elem_dif)
+				return -ENOMEM;
+
+			if (*n_elem_dif > HISI_SAS_SGE_DIF_PAGE_CNT) {
+				dev_err(dev, "task prep: n_elem_dif(%d) too large\n",
+					*n_elem_dif);
+				rc = -EINVAL;
+				goto err_out_dif_dma_unmap;
+			}
+		}
+	}
+
+	return 0;
+
+err_out_dif_dma_unmap:
+	dma_unmap_sg(dev, scsi_prot_sglist(scsi_cmnd),
+		     scsi_prot_sg_count(scsi_cmnd), task->data_dir);
+	return rc;
+}
+
 static int hisi_sas_task_prep(struct sas_task *task,
 			      struct hisi_sas_dq **dq_pointer,
 			      bool is_tmf, struct hisi_sas_tmf_task *tmf,
@@ -394,7 +454,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	struct asd_sas_port *sas_port = device->port;
 	struct device *dev = hisi_hba->dev;
 	int dlvry_queue_slot, dlvry_queue, rc, slot_idx;
-	int n_elem = 0, n_elem_req = 0, n_elem_resp = 0;
+	int n_elem = 0, n_elem_dif = 0, n_elem_req = 0, n_elem_resp = 0;
 	struct hisi_sas_dq *dq;
 	unsigned long flags;
 	int wr_q_index;
@@ -427,6 +487,12 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	if (rc < 0)
 		goto prep_out;
 
+	if (!sas_protocol_ata(task->task_proto)) {
+		rc = hisi_sas_dif_dma_map(hisi_hba, &n_elem_dif, task);
+		if (rc < 0)
+			goto err_out_dma_unmap;
+	}
+
 	if (hisi_hba->hw->slot_index_alloc)
 		rc = hisi_hba->hw->slot_index_alloc(hisi_hba, device);
 	else {
@@ -445,7 +511,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 		rc  = hisi_sas_slot_index_alloc(hisi_hba, scsi_cmnd);
 	}
 	if (rc < 0)
-		goto err_out_dma_unmap;
+		goto err_out_dif_dma_unmap;
 
 	slot_idx = rc;
 	slot = &hisi_hba->slot_info[slot_idx];
@@ -466,6 +532,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	dlvry_queue_slot = wr_q_index;
 
 	slot->n_elem = n_elem;
+	slot->n_elem_dif = n_elem_dif;
 	slot->dlvry_queue = dlvry_queue;
 	slot->dlvry_queue_slot = dlvry_queue_slot;
 	cmd_hdr_base = hisi_hba->cmd_hdr[dlvry_queue];
@@ -509,6 +576,9 @@ static int hisi_sas_task_prep(struct sas_task *task,
 
 err_out_tag:
 	hisi_sas_slot_index_free(hisi_hba, slot_idx);
+err_out_dif_dma_unmap:
+	if (!sas_protocol_ata(task->task_proto))
+		hisi_sas_dif_dma_unmap(hisi_hba, task, n_elem_dif);
 err_out_dma_unmap:
 	hisi_sas_dma_unmap(hisi_hba, task, n_elem,
 			   n_elem_req, n_elem_resp);
@@ -2142,21 +2212,26 @@ int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
 	if (!hisi_hba->slot_info)
 		goto err_out;
 
-	/* roundup to avoid overly large block size */
+	/* roundup to avoid an overly large block size */
 	max_command_entries_ru = roundup(max_command_entries, 64);
-	sz_slot_buf_ru = roundup(sizeof(struct hisi_sas_slot_buf_table), 64);
+	if (hisi_hba->enable_dif_dix)
+		sz_slot_buf_ru = sizeof(struct hisi_sas_slot_dif_buf_table);
+	else
+		sz_slot_buf_ru = sizeof(struct hisi_sas_slot_buf_table);
+	sz_slot_buf_ru = roundup(sz_slot_buf_ru, 64);
 	s = lcm(max_command_entries_ru, sz_slot_buf_ru);
 	blk_cnt = (max_command_entries_ru * sz_slot_buf_ru) / s;
 	slots_per_blk = s / sz_slot_buf_ru;
+
 	for (i = 0; i < blk_cnt; i++) {
-		struct hisi_sas_slot_buf_table *buf;
-		dma_addr_t buf_dma;
 		int slot_index = i * slots_per_blk;
+		dma_addr_t buf_dma;
+		void *buf;
 
-		buf = dmam_alloc_coherent(dev, s, &buf_dma, GFP_KERNEL);
+		buf = dmam_alloc_coherent(dev, s, &buf_dma,
+					  GFP_KERNEL | __GFP_ZERO);
 		if (!buf)
 			goto err_out;
-		memset(buf, 0, s);
 
 		for (j = 0; j < slots_per_blk; j++, slot_index++) {
 			struct hisi_sas_slot *slot;
@@ -2166,8 +2241,8 @@ int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
 			slot->buf_dma = buf_dma;
 			slot->idx = slot_index;
 
-			buf++;
-			buf_dma += sizeof(*buf);
+			buf += sz_slot_buf_ru;
+			buf_dma += sz_slot_buf_ru;
 		}
 	}
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 8a08078..c03562b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -127,6 +127,8 @@
 #define PHY_CTRL			(PORT_BASE + 0x14)
 #define PHY_CTRL_RESET_OFF		0
 #define PHY_CTRL_RESET_MSK		(0x1 << PHY_CTRL_RESET_OFF)
+#define CMD_HDR_PIR_OFF			8
+#define CMD_HDR_PIR_MSK			(0x1 << CMD_HDR_PIR_OFF)
 #define SL_CFG				(PORT_BASE + 0x84)
 #define AIP_LIMIT			(PORT_BASE + 0x90)
 #define SL_CONTROL			(PORT_BASE + 0x94)
@@ -333,6 +335,16 @@
 #define ITCT_HDR_RTOLT_OFF		48
 #define ITCT_HDR_RTOLT_MSK		(0xffffULL << ITCT_HDR_RTOLT_OFF)
 
+struct hisi_sas_protect_iu_v3_hw {
+	u32 dw0;
+	u32 lbrtcv;
+	u32 lbrtgv;
+	u32 dw3;
+	u32 dw4;
+	u32 dw5;
+	u32 rsv;
+};
+
 struct hisi_sas_complete_v3_hdr {
 	__le32 dw0;
 	__le32 dw1;
@@ -372,9 +384,27 @@ struct hisi_sas_err_record_v3 {
 	((fis.command == ATA_CMD_DEV_RESET) && \
 	((fis.control & ATA_SRST) != 0)))
 
+#define T10_INSRT_EN_OFF    0
+#define T10_INSRT_EN_MSK    (1 << T10_INSRT_EN_OFF)
+#define T10_RMV_EN_OFF	    1
+#define T10_RMV_EN_MSK	    (1 << T10_RMV_EN_OFF)
+#define T10_RPLC_EN_OFF	    2
+#define T10_RPLC_EN_MSK	    (1 << T10_RPLC_EN_OFF)
+#define T10_CHK_EN_OFF	    3
+#define T10_CHK_EN_MSK	    (1 << T10_CHK_EN_OFF)
+#define INCR_LBRT_OFF	    5
+#define INCR_LBRT_MSK	    (1 << INCR_LBRT_OFF)
+#define USR_DATA_BLOCK_SZ_OFF	20
+#define USR_DATA_BLOCK_SZ_MSK	(0x3 << USR_DATA_BLOCK_SZ_OFF)
+#define T10_CHK_MSK_OFF	    16
+
 static bool hisi_sas_intr_conv;
 MODULE_PARM_DESC(intr_conv, "interrupt converge enable (0-1)");
 
+static bool enable_dif_dix;
+module_param(enable_dif_dix, bool, 0444);
+MODULE_PARM_DESC(enable_dif_dix, "DIF/DIX enable (0-1)");
+
 static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
 {
 	void __iomem *regs = hisi_hba->regs + off;
@@ -937,7 +967,107 @@ static void prep_prd_sge_v3_hw(struct hisi_hba *hisi_hba,
 
 	hdr->prd_table_addr = cpu_to_le64(hisi_sas_sge_addr_dma(slot));
 
-	hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
+	hdr->sg_len |= cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
+}
+
+static void prep_prd_sge_dif_v3_hw(struct hisi_hba *hisi_hba,
+				  struct hisi_sas_slot *slot,
+				  struct hisi_sas_cmd_hdr *hdr,
+				  struct scatterlist *scatter,
+				  int n_elem)
+{
+	struct hisi_sas_sge_dif_page *sge_dif_page;
+	struct scatterlist *sg;
+	int i;
+
+	sge_dif_page = hisi_sas_sge_dif_addr_mem(slot);
+
+	for_each_sg(scatter, sg, n_elem, i) {
+		struct hisi_sas_sge *entry = &sge_dif_page->sge[i];
+
+		entry->addr = cpu_to_le64(sg_dma_address(sg));
+		entry->page_ctrl_0 = entry->page_ctrl_1 = 0;
+		entry->data_len = cpu_to_le32(sg_dma_len(sg));
+		entry->data_off = 0;
+	}
+
+	hdr->dif_prd_table_addr = cpu_to_le64(
+			hisi_sas_sge_dif_addr_dma(slot));
+
+	hdr->sg_len |= cpu_to_le32(n_elem << CMD_HDR_DIF_SGL_LEN_OFF);
+}
+
+static void fill_prot_v3_hw(struct scsi_cmnd *scsi_cmnd,
+			    struct hisi_sas_protect_iu_v3_hw *prot)
+{
+	u8 prot_type = scsi_get_prot_type(scsi_cmnd);
+	u8 prot_op = scsi_get_prot_op(scsi_cmnd);
+	unsigned int interval = scsi_prot_interval(scsi_cmnd);
+	u32 lbrt_chk_val;
+
+	if (interval == 4096)
+		lbrt_chk_val = (u32)(scsi_get_lba(scsi_cmnd) >> 3);
+	else
+		lbrt_chk_val = (u32)scsi_get_lba(scsi_cmnd);
+
+	switch (prot_op) {
+	case SCSI_PROT_READ_INSERT:
+		prot->dw0 |= T10_INSRT_EN_MSK;
+		prot->lbrtgv = lbrt_chk_val;
+		break;
+	case SCSI_PROT_READ_STRIP:
+		prot->dw0 |= (T10_RMV_EN_MSK | T10_CHK_EN_MSK);
+		prot->lbrtcv = lbrt_chk_val;
+		if (prot_type == SCSI_PROT_DIF_TYPE1)
+			prot->dw4 |= (0xc << 16);
+		else if (prot_type == SCSI_PROT_DIF_TYPE3)
+			prot->dw4 |= (0xfc << 16);
+		break;
+	case SCSI_PROT_READ_PASS:
+		prot->dw0 |= T10_CHK_EN_MSK;
+		prot->lbrtcv = lbrt_chk_val;
+		if (prot_type == SCSI_PROT_DIF_TYPE1)
+			prot->dw4 |= (0xc << 16);
+		else if (prot_type == SCSI_PROT_DIF_TYPE3)
+			prot->dw4 |= (0xfc << 16);
+		break;
+	case SCSI_PROT_WRITE_INSERT:
+		prot->dw0 |= T10_INSRT_EN_MSK;
+		prot->lbrtgv = lbrt_chk_val;
+		break;
+	case SCSI_PROT_WRITE_STRIP:
+		prot->dw0 |= (T10_RMV_EN_MSK | T10_CHK_EN_MSK);
+		prot->lbrtcv = lbrt_chk_val;
+		break;
+	case SCSI_PROT_WRITE_PASS:
+		prot->dw0 |= T10_CHK_EN_MSK;
+		prot->lbrtcv = lbrt_chk_val;
+		if (prot_type == SCSI_PROT_DIF_TYPE1)
+			prot->dw4 |= (0xc << 16);
+		else if (prot_type == SCSI_PROT_DIF_TYPE3)
+			prot->dw4 |= (0xfc << 16);
+		break;
+	default:
+		WARN(1, "prot_op(0x%x) is not valid\n", prot_op);
+		break;
+	}
+
+	switch (interval) {
+	case 512:
+		break;
+	case 4096:
+		prot->dw0 |= (0x1 << USR_DATA_BLOCK_SZ_OFF);
+		break;
+	case 520:
+		prot->dw0 |= (0x2 << USR_DATA_BLOCK_SZ_OFF);
+		break;
+	default:
+		WARN(1, "protection interval (0x%x) invalid\n",
+		     interval);
+		break;
+	}
+
+	prot->dw0 |= INCR_LBRT_MSK;
 }
 
 static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
@@ -951,9 +1081,10 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	struct sas_ssp_task *ssp_task = &task->ssp_task;
 	struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
 	struct hisi_sas_tmf_task *tmf = slot->tmf;
+	unsigned char prot_op = scsi_get_prot_op(scsi_cmnd);
 	int has_data = 0, priority = !!tmf;
 	u8 *buf_cmd;
-	u32 dw1 = 0, dw2 = 0;
+	u32 dw1 = 0, dw2 = 0, len = 0;
 
 	hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) |
 			       (2 << CMD_HDR_TLR_CTRL_OFF) |
@@ -992,11 +1123,16 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	hdr->dw2 = cpu_to_le32(dw2);
 	hdr->transfer_tags = cpu_to_le32(slot->idx);
 
-	if (has_data)
+	if (has_data) {
 		prep_prd_sge_v3_hw(hisi_hba, slot, hdr, task->scatter,
-					slot->n_elem);
+				   slot->n_elem);
+
+		if (scsi_prot_sg_count(scsi_cmnd))
+			prep_prd_sge_dif_v3_hw(hisi_hba, slot, hdr,
+					       scsi_prot_sglist(scsi_cmnd),
+					       slot->n_elem_dif);
+	}
 
-	hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
 	hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
 	hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
 
@@ -1021,6 +1157,34 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 			break;
 		}
 	}
+
+	if (has_data && (prot_op != SCSI_PROT_NORMAL)) {
+		struct hisi_sas_protect_iu_v3_hw prot;
+		u8 *buf_cmd_prot;
+
+		hdr->dw7 |= 1 << CMD_HDR_ADDR_MODE_SEL_OFF;
+		hdr->dw1 |= CMD_HDR_PIR_MSK;
+		buf_cmd_prot = hisi_sas_cmd_hdr_addr_mem(slot) +
+			       sizeof(struct ssp_frame_hdr) +
+			       sizeof(struct ssp_command_iu);
+
+		memset(&prot, 0, sizeof(struct hisi_sas_protect_iu_v3_hw));
+		fill_prot_v3_hw(scsi_cmnd, &prot);
+		memcpy(buf_cmd_prot, &prot,
+		       sizeof(struct hisi_sas_protect_iu_v3_hw));
+
+		if ((prot_op == SCSI_PROT_READ_INSERT) ||
+		    (prot_op == SCSI_PROT_WRITE_INSERT) ||
+		    (prot_op == SCSI_PROT_WRITE_PASS) ||
+		    (prot_op == SCSI_PROT_READ_PASS)) {
+			unsigned int interval = scsi_prot_interval(scsi_cmnd);
+			unsigned int ilog2_interval = ilog2(interval);
+
+			len = (task->total_xfer_len >> ilog2_interval) * 8;
+		}
+	}
+
+	hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len + len);
 }
 
 static void prep_smp_v3_hw(struct hisi_hba *hisi_hba,
@@ -2225,6 +2389,7 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
 	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
+	.sg_prot_tablesize	= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
@@ -2284,6 +2449,7 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	hisi_hba->dev = dev;
 	hisi_hba->shost = shost;
 	SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+	hisi_hba->enable_dif_dix = enable_dif_dix;
 
 	timer_setup(&hisi_hba->timer, NULL, 0);
 
@@ -2395,6 +2561,19 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	if (rc)
 		goto err_out_register_ha;
 
+	if (hisi_hba->enable_dif_dix) {
+		dev_info(dev, "Registering for DIF/DIX type 1/2/3 protection.\n");
+		scsi_host_set_prot(hisi_hba->shost,
+				   SHOST_DIF_TYPE1_PROTECTION |
+				   SHOST_DIF_TYPE2_PROTECTION |
+				   SHOST_DIF_TYPE3_PROTECTION |
+				   SHOST_DIX_TYPE1_PROTECTION |
+				   SHOST_DIX_TYPE2_PROTECTION |
+				   SHOST_DIX_TYPE3_PROTECTION);
+		scsi_host_set_guard(hisi_hba->shost,
+				    SHOST_DIX_GUARD_CRC);
+	}
+
 	scsi_scan_host(shost);
 
 	return 0;
-- 
1.9.1