[PATCH 00/22] Add more support to RZ/G1N

[PATCH 00/22] Add more support to RZ/G1N

[Biju Das]

This patch series aims to add support for some more interfaces to
RZ/G1N SoC (SCIF/HSCIF, I2C, IIC, SDHI, MMC, USBHost, USB Function,
 rwdt, Audio, Display, CAN and CMT ....).

This patch series tested against renesas-dev.
it depends on the the below patch series.

https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=46273

Biju Das (22):
  ARM: dts: r8a7744: Add [H]SCIF{A|B} support
  ARM: dts: r8a7744: Add I2C and IIC support
  ARM: dts: r8a7744: Add SDHI nodes
  ARM: dts: r8a7744: Add MMC node
  ARM: dts: r8a7744-iwg20m: Add eMMC support
  ARM: dts: r8a7744-iwg20m: Enable SDHI10 controller
  ARM: dts: r8a7744: USB 2.0 host support
  ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes
  ARM: dts: r8a7744: Add RWDT node
  ARM: dts: r8a7744: Add audio support
  ARM: dts: r8a7744: Add DU support
  ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB
  ARM: dts: r8a7744: Add CAN support
  ARM: dts: r8a7744: Add IRQC support
  ARM: dts: r8a7744: Add thermal device to DT
  ARM: dts: r8a7744: Add CMT SoC specific support
  ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM
  ARM: dts: r8a7744: Add QSPI support
  ARM: dts: r8a7744-iwg20m: Add SPI NOR support
  ARM: dts: r8a7744: Add MSIOF[012] support
  ARM: dts: r8a7744: Add xhci support
  ARM: dts: r8a7744: Add PCIe Controller device node

 arch/arm/boot/dts/Makefile                      |    1 +
 arch/arm/boot/dts/iwg20d-q7-common.dtsi         |    9 +
 arch/arm/boot/dts/r8a7743-iwg20m.dtsi           |    9 -
 arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts |   17 +
 arch/arm/boot/dts/r8a7744-iwg20m.dtsi           |   59 ++
 arch/arm/boot/dts/r8a7744.dtsi                  | 1052 ++++++++++++++++++++++-
 6 files changed, 1114 insertions(+), 33 deletions(-)
 create mode 100644 arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts

-- 
2.7.4

[PATCH 01/22] ARM: dts: r8a7744: Add [H]SCIF{A|B} support

[Biju Das]

Describe [H]SCIF{|A|B} ports in the R8A7744 device tree.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 257 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 254 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 79e75e7..165c701 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -414,9 +414,139 @@
 			status = "disabled";
 		};
 
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 0x40>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 0x40>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 0x40>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7744",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
 		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7744",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
 			reg = <0 0xe6c30000 0 0x100>;
-			/* placeholder */
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7744",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
 		};
 
 		scif0: serial@e6e60000 {
@@ -427,19 +557,140 @@
 			clocks = <&cpg CPG_MOD 721>,
 				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
 			resets = <&cpg 721>;
 			status = "disabled";
 		};
 
 		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
 			reg = <0 0xe6e68000 0 0x40>;
-			/* placeholder */
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 0x40>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 0x40>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 0x40>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7744",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
 		};
 
 		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7744",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
 			reg = <0 0xe62c8000 0 0x60>;
-			/* placeholder */
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7744",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 0x60>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
 		};
 
 		can0: can@e6e80000 {
-- 
2.7.4

[PATCH 02/22] ARM: dts: r8a7744: Add I2C and IIC support

[Biju Das]

Add the I2C[0-5] and IIC[0,1,3] devices nodes to the R8A7744 device tree.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 141 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 139 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 165c701..6505ebd 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -15,6 +15,18 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &iic0;
+		i2c7 = &iic1;
+		i2c8 = &iic3;
+	};
+
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
 	 * clocks by default.
@@ -310,19 +322,144 @@
 			reg = <0 0xe6300000 0 0x40000>;
 		};
 
+		/* The memory map in the User's Manual maps the cores to
+		 * bus numbers
+		 */
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
 		i2c2: i2c@e6530000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
 			reg = <0 0xe6530000 0 0x40>;
-			/* placeholder */
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
 		};
 
 		i2c5: i2c@e6528000 {
 			/* doesn't need pinmux */
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
 			reg = <0 0xe6528000 0 0x40>;
-			/* placeholder */
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		iic0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7744",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		iic1: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7744",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		iic3: i2c@e60b0000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7744",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
 		};
 
 		hsusb: usb@e6590000 {
-- 
2.7.4

[PATCH 03/22] ARM: dts: r8a7744: Add SDHI nodes

[Biju Das]

Add SDHI nodes to the DT of the r8a7744 SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 39 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 6505ebd..660747d 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -880,14 +880,49 @@
 			/* placeholder */
 		};
 
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7744",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
 		sdhi1: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a7744",
+				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee140000 0 0x100>;
-			/* placeholder */
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
 		};
 
 		sdhi2: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a7744",
+				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee160000 0 0x100>;
-			/* placeholder */
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
 		};
 
 		gic: interrupt-controller@f1001000 {
-- 
2.7.4

[PATCH 04/22] ARM: dts: r8a7744: Add MMC node

[Biju Das]

Add MMC node to the DT of the r8a7744 SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 660747d..7a0ccae 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -925,6 +925,22 @@
 			status = "disabled";
 		};
 
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7744",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			max-frequency = <97500000>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1001000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
-- 
2.7.4

[PATCH 05/22] ARM: dts: r8a7744-iwg20m: Add eMMC support

[Biju Das]

Add eMMC support for iWave RZ/G1N Qseven System On Module.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744-iwg20m.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
index 6166ae0..1e57b1f 100644
--- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
@@ -29,3 +29,20 @@
 &extal_clk {
 	clock-frequency = <20000000>;
 };
+
+&pfc {
+	mmcif0_pins: mmc {
+		groups = "mmc_data8_b", "mmc_ctrl";
+		function = "mmc";
+	};
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
-- 
2.7.4

[PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10 controller

[Biju Das]

Enable the SDHI0 controller on iWave RZ/G1N Qseven System On Module.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744-iwg20m.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
index 1e57b1f..503583e 100644
--- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
@@ -35,6 +35,12 @@
 		groups = "mmc_data8_b", "mmc_ctrl";
 		function = "mmc";
 	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
 };
 
 &mmcif0 {
@@ -46,3 +52,13 @@
 	non-removable;
 	status = "okay";
 };
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
-- 
2.7.4

[PATCH 07/22] ARM: dts: r8a7744: USB 2.0 host support

[Biju Das]

Describe internal PCI bridge devices, USB phy device and
link PCI USB devices to USB phy.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 77 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 72 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 7a0ccae..3549ee1 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -468,8 +468,25 @@
 		};
 
 		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7744",
+				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
-			/* placeholder */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
 		};
 
 		dmac0: dma-controller@e6700000 {
@@ -861,23 +878,73 @@
 		};
 
 		pci0: pci@ee090000 {
-			reg = <0 0xee090000 0 0xc00>;
+			compatible = "renesas,pci-r8a7744",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
 
 			bus-range = <0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
-			/* placeholder */
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xff00 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
 		};
 
 		pci1: pci@ee0d0000 {
-			reg = <0 0xee0d0000 0 0xc00>;
+			compatible = "renesas,pci-r8a7744",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
 
 			bus-range = <1 1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
-			/* placeholder */
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xff00 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x10800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x11000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
 		};
 
 		sdhi0: sd@ee100000 {
-- 
2.7.4

[PATCH 08/22] ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes

[Biju Das]

Add usb dmac and hsusb device nodes on RZ/G1N SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 42 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 3549ee1..118a596 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -463,8 +463,20 @@
 		};
 
 		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7744",
+				     "renesas,rcar-gen2-usbhs";
 			reg = <0 0xe6590000 0 0x100>;
-			/* placeholder */
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
 		};
 
 		usbphy: usb-phy@e6590100 {
@@ -489,6 +501,34 @@
 			};
 		};
 
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7744-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7744-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a7744",
 				     "renesas,rcar-dmac";
-- 
2.7.4

[PATCH 09/22] ARM: dts: r8a7744: Add RWDT node

[Biju Das]

Add a device node for the Watchdog Timer (RWDT) controller on the Renesas
RZ/G1N (r8a7744) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 118a596..4613a54 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -293,6 +293,16 @@
 			reg = <0 0xe6160000 0 0x100>;
 		};
 
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7744-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
 		sysc: system-controller@e6180000 {
 			compatible = "renesas,r8a7744-sysc";
 			reg = <0 0xe6180000 0 0x200>;
-- 
2.7.4

[PATCH 10/22] ARM: dts: r8a7744: Add audio support

[Biju Das]

Add sound support for the RZ/G1N SoC (a.k.a. R8A7744).

This work is based on similar work done on the R8A7743 SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 243 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 235 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 4613a54..d902f76 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -908,23 +908,250 @@
 		};
 
 		rcar_sound: sound@ec500000 {
-			reg = <0 0xec500000 0 0x1000>;
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7744",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7744_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+				      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6", "src.5",
+				      "src.4", "src.3", "src.2", "src.1", "src.0",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+				      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
+			status = "disabled";
 
 			rcar_sound,dvc {
-				dvc0: dvc-0 {};
-				dvc1: dvc-1 {};
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
 			};
 
 			rcar_sound,src {
-				src2: src-2 {};
-				src3: src-3 {};
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
 			};
 
 			rcar_sound,ssi {
-				ssi0: ssi-0 {};
-				ssi1: ssi-1 {};
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
 			};
-			/* placeholder */
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7744",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7744",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
 		};
 
 		pci0: pci@ee090000 {
-- 
2.7.4

[PATCH 11/22] ARM: dts: r8a7744: Add DU support

[Biju Das]

Add du node to r8a7744 SoC DT. Boards that want to enable the DU
need to specify the output topology.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index d902f76..9c2e8ea 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -1300,8 +1300,17 @@
 		};
 
 		du: display@feb00000 {
+			compatible = "renesas,du-r8a7744";
 			reg = <0 0xfeb00000 0 0x40000>,
 			      <0 0xfeb90000 0 0x1c>;
+			reg-names = "du", "lvds.0";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 726>;
+			clock-names = "du.0", "du.1", "lvds.0";
+			status = "disabled";
 
 			ports {
 				#address-cells = <1>;
@@ -1318,7 +1327,6 @@
 					};
 				};
 			};
-			/* placeholder */
 		};
 
 		prr: chipid@ff000044 {
-- 
2.7.4

[PATCH 12/22] ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB

[Biju Das]

This patch adds support for the camera daughter board which is
connected to iWave's RZ/G1N Qseven carrier board.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/Makefile                      |  1 +
 arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts | 17 +++++++++++++++++
 2 files changed, 18 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index aba5a25..9cf6fdf 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -830,6 +830,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 	r8a7743-iwg20d-q7-dbcm-ca.dtb \
 	r8a7743-sk-rzg1m.dtb \
 	r8a7744-iwg20d-q7.dtb \
+	r8a7744-iwg20d-q7-dbcm-ca.dtb \
 	r8a7745-iwg22d-sodimm.dtb \
 	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
 	r8a7745-sk-rzg1e.dtb \
diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts
new file mode 100644
index 0000000..3e58c2e9
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave Systems RZ/G1N Qseven board development
+ * platform with camera daughter board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7744-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
+#include "iwg20d-q7-dbcm-ca.dtsi"
+
+/ {
+	model = "iWave Systems RZ/G1N Qseven development platform with camera add-on";
+	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744";
+};
-- 
2.7.4

[PATCH 13/22] ARM: dts: r8a7744: Add CAN support

[Biju Das]

Add the definitions for can0 and can1 to the r8a7744 SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 9c2e8ea..e6662d9 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -898,13 +898,31 @@
 		};
 
 		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7744",
+				     "renesas,rcar-gen2-can";
 			reg = <0 0xe6e80000 0 0x1000>;
-			/* placeholder */
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7744_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
 		};
 
 		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7744",
+				     "renesas,rcar-gen2-can";
 			reg = <0 0xe6e88000 0 0x1000>;
-			/* placeholder */
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7744_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
 		};
 
 		rcar_sound: sound@ec500000 {
-- 
2.7.4

[PATCH 14/22] ARM: dts: r8a7744: Add IRQC support

[Biju Das]

Describe the IRQC interrupt controller in the r8a7744 device tree.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index e6662d9..b26315d 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -309,6 +309,26 @@
 			#power-domain-cells = <1>;
 		};
 
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7744", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
-- 
2.7.4

[PATCH 15/22] ARM: dts: r8a7744: Add thermal device to DT

[Biju Das]

This patch instantiates the thermal sensor module with thermal-zone
support.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index b26315d..0eaf8a1 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -329,6 +329,17 @@
 			resets = <&cpg 407>;
 		};
 
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7744",
+				     "renesas,rcar-gen2-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
@@ -1373,6 +1384,26 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-- 
2.7.4

[PATCH 16/22] ARM: dts: r8a7744: Add CMT SoC specific support

[Biju Das]

Add CMT[01] support to SoC DT.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 0eaf8a1..39f309c 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -1382,6 +1382,38 @@
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
 		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7744-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7744-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			status = "disabled";
+		};
 	};
 
 	thermal-zones {
-- 
2.7.4

[PATCH 17/22] ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM

[Biju Das]

The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules
are SoC specific and should be part of board dts rather than SoM dtsi. By
moving these nodes to the common dtsi it allows cmt and rwdt to be enabled
on both of these boards with less lines of code.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/iwg20d-q7-common.dtsi | 9 +++++++++
 arch/arm/boot/dts/r8a7743-iwg20m.dtsi   | 9 ---------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ca9154dd..e2b1ab9 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -116,6 +116,10 @@
 	status = "okay";
 };
 
+&cmt0 {
+	status = "okay";
+};
+
 &hsusb {
 	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
@@ -230,6 +234,11 @@
 	};
 };
 
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
index 0e2e033..b3fee1d 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
@@ -31,10 +31,6 @@
 	};
 };
 
-&cmt0 {
-	status = "okay";
-};
-
 &extal_clk {
 	clock-frequency = <20000000>;
 };
@@ -88,11 +84,6 @@
 	};
 };
 
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
-- 
2.7.4

[PATCH 18/22] ARM: dts: r8a7744: Add QSPI support

[Biju Das]

Add the DT node for the QSPI interface to the SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 39f309c..abe0ee3 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -649,6 +649,22 @@
 			status = "disabled";
 		};
 
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7744", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 917>;
+			status = "disabled";
+		};
+
 		scifa0: serial@e6c40000 {
 			compatible = "renesas,scifa-r8a7744",
 				     "renesas,rcar-gen2-scifa", "renesas,scifa";
-- 
2.7.4

[PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support

[Biju Das]

Add support for the SPI NOR device used to boot up the system
to the iWave RZ/G1N Qseven System On Module DT.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744-iwg20m.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
index 503583e..664a827 100644
--- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
@@ -36,6 +36,11 @@
 		function = "mmc";
 	};
 
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data2";
+		function = "qspi";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -53,6 +58,27 @@
 	status = "okay";
 };
 
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WARNING - This device contains the bootloader. Handle with care. */
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
-- 
2.7.4

[PATCH 20/22] ARM: dts: r8a7744: Add MSIOF[012] support

[Biju Das]

Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 48 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index abe0ee3..c9e9678 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -944,6 +944,54 @@
 			status = "disabled";
 		};
 
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7744",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 000>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 000>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7744",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 208>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6e00000 {
+			compatible = "renesas,msiof-r8a7744",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 205>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+			       <&dmac1 0x41>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 205>;
+			status = "disabled";
+		};
+
 		can0: can@e6e80000 {
 			compatible = "renesas,can-r8a7744",
 				     "renesas,rcar-gen2-can";
-- 
2.7.4

[PATCH 21/22] ARM: dts: r8a7744: Add xhci support

[Biju Das]

Add a device node for the xhci controller on the Renesas
RZ/G1N (r8a7744) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index c9e9678..9c9508e 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -1267,6 +1267,26 @@
 			dma-channels = <13>;
 		};
 
+		/*
+		 * pci1 and xhci share the same phy, therefore only one of them
+		 * can be active at any one time. If both of them are enabled,
+		 * a race condition will determine who'll control the phy.
+		 * A firmware file is needed by the xhci driver in order for
+		 * USB 3.0 to work properly.
+		 */
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7744",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		pci0: pci@ee090000 {
 			compatible = "renesas,pci-r8a7744",
 				     "renesas,pci-rcar-gen2";
-- 
2.7.4

[PATCH 22/22] ARM: dts: r8a7744: Add PCIe Controller device node

[Biju Das]

Add a device node for the PCIe controller on the Renesas
RZ/G1N (r8a7744) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 9c9508e..2eae905 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -1432,6 +1432,34 @@
 			resets = <&cpg 408>;
 		};
 
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7744",
+				     "renesas,pcie-rcar-gen2";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
+				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a7744";
 			reg = <0 0xfeb00000 0 0x40000>,
-- 
2.7.4

Re: [PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10 controller

[Sergei Shtylyov]

Hello!

On 11/27/2018 02:56 PM, Biju Das wrote:

> Enable the SDHI0 controller on iWave RZ/G1N Qseven System On Module.

   Why your subject has SDHI10?

> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
[...]

MBR, Sergei

RE: [PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10 controller

[Biju Das]

Hello Sergei,

Thanks for the feedback.

> -----Original Message-----
> From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Sent: 27 November 2018 14:17
> To: Biju Das <biju.das@bp.renesas.com>; Rob Herring
> <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>
> Cc: Simon Horman <horms@verge.net.au>; Magnus Damm
> <magnus.damm@gmail.com>; linux-renesas-soc@vger.kernel.org;
> devicetree@vger.kernel.org; Geert Uytterhoeven
> <geert+renesas@glider.be>; Chris Paterson
> <Chris.Paterson2@renesas.com>; Fabrizio Castro
> <fabrizio.castro@bp.renesas.com>
> Subject: Re: [PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10
> controller
>
> Hello!
>
> On 11/27/2018 02:56 PM, Biju Das wrote:
>
> > Enable the SDHI0 controller on iWave RZ/G1N Qseven System On Module.
>
>    Why your subject has SDHI10?

It is a typo.

Simon, Will you fix this while applying or do you want me to send V2?
Please let me know.

> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> [...]
>
> MBR, Sergei



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10 controller

[Simon Horman]

On Tue, Nov 27, 2018 at 02:22:12PM +0000, Biju Das wrote:
> Hello Sergei,
> 
> Thanks for the feedback.
> 
> > -----Original Message-----
> > From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> > Sent: 27 November 2018 14:17
> > To: Biju Das <biju.das@bp.renesas.com>; Rob Herring
> > <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>
> > Cc: Simon Horman <horms@verge.net.au>; Magnus Damm
> > <magnus.damm@gmail.com>; linux-renesas-soc@vger.kernel.org;
> > devicetree@vger.kernel.org; Geert Uytterhoeven
> > <geert+renesas@glider.be>; Chris Paterson
> > <Chris.Paterson2@renesas.com>; Fabrizio Castro
> > <fabrizio.castro@bp.renesas.com>
> > Subject: Re: [PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10
> > controller
> >
> > Hello!
> >
> > On 11/27/2018 02:56 PM, Biju Das wrote:
> >
> > > Enable the SDHI0 controller on iWave RZ/G1N Qseven System On Module.
> >
> >    Why your subject has SDHI10?
> 
> It is a typo.
> 
> Simon, Will you fix this while applying or do you want me to send V2?
> Please let me know.

No need to repost for this.

> 
> > > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > [...]
> >
> > MBR, Sergei
> 
> 
> 
> Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

RE: [PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10 controller

[Biju Das]

> -----Original Message-----
> From: linux-renesas-soc-owner@vger.kernel.org <linux-renesas-soc-
> owner@vger.kernel.org> On Behalf Of Simon Horman
> Sent: 28 November 2018 13:24
> To: Biju Das <biju.das@bp.renesas.com>
> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>; Rob Herring
> <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Magnus
> Damm <magnus.damm@gmail.com>; linux-renesas-soc@vger.kernel.org;
> devicetree@vger.kernel.org; Geert Uytterhoeven
> <geert+renesas@glider.be>; Chris Paterson
> <Chris.Paterson2@renesas.com>; Fabrizio Castro
> <fabrizio.castro@bp.renesas.com>
> Subject: Re: [PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10
> > >
> > > On 11/27/2018 02:56 PM, Biju Das wrote:
> > >
> > > > Enable the SDHI0 controller on iWave RZ/G1N Qseven System On
> Module.
> > >
> > >    Why your subject has SDHI10?
> >
> > It is a typo.
> >
> > Simon, Will you fix this while applying or do you want me to send V2?
> > Please let me know.
>
> No need to repost for this.

Thanks Simon.

Regards,
Biju



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH 01/22] ARM: dts: r8a7744: Add [H]SCIF{A|B} support

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:14AM +0000, Biju Das wrote:
> Describe [H]SCIF{|A|B} ports in the R8A7744 device tree.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 02/22] ARM: dts: r8a7744: Add I2C and IIC support

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:15AM +0000, Biju Das wrote:
> Add the I2C[0-5] and IIC[0,1,3] devices nodes to the R8A7744 device tree.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> ---
>  arch/arm/boot/dts/r8a7744.dtsi | 141 ++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 139 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
> index 165c701..6505ebd 100644
> --- a/arch/arm/boot/dts/r8a7744.dtsi
> +++ b/arch/arm/boot/dts/r8a7744.dtsi
> @@ -15,6 +15,18 @@
>  	#address-cells = <2>;
>  	#size-cells = <2>;
>  
> +	aliases {
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c1;
> +		i2c2 = &i2c2;
> +		i2c3 = &i2c3;
> +		i2c4 = &i2c4;
> +		i2c5 = &i2c5;
> +		i2c6 = &iic0;
> +		i2c7 = &iic1;
> +		i2c8 = &iic3;
> +	};
> +

I believe we are moving away from adding aliases such as those above.
Geert, can you comment on this?

Other than that this patch looks good to me.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 03/22] ARM: dts: r8a7744: Add SDHI nodes

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:16AM +0000, Biju Das wrote:
> Add SDHI nodes to the DT of the r8a7744 SoC.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

RE: [PATCH 02/22] ARM: dts: r8a7744: Add I2C and IIC support

[Biju Das]

Hi Simon & Geert,

Thanks for the feedback.

> -----Original Message-----
> From: linux-renesas-soc-owner@vger.kernel.org <linux-renesas-soc-
> owner@vger.kernel.org> On Behalf Of Simon Horman
> Sent: 29 November 2018 13:41
> To: Biju Das <biju.das@bp.renesas.com>
> Cc: Rob Herring <robh+dt@kernel.org>; Mark Rutland
> <mark.rutland@arm.com>; Magnus Damm <magnus.damm@gmail.com>;
> linux-renesas-soc@vger.kernel.org; devicetree@vger.kernel.org; Geert
> Uytterhoeven <geert+renesas@glider.be>; Chris Paterson
> <Chris.Paterson2@renesas.com>; Fabrizio Castro
> <fabrizio.castro@bp.renesas.com>
> Subject: Re: [PATCH 02/22] ARM: dts: r8a7744: Add I2C and IIC support
>
> On Tue, Nov 27, 2018 at 11:56:15AM +0000, Biju Das wrote:
> > Add the I2C[0-5] and IIC[0,1,3] devices nodes to the R8A7744 device tree.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> >  arch/arm/boot/dts/r8a7744.dtsi | 141
> > ++++++++++++++++++++++++++++++++++++++++-
> >  1 file changed, 139 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/r8a7744.dtsi
> > b/arch/arm/boot/dts/r8a7744.dtsi index 165c701..6505ebd 100644
> > --- a/arch/arm/boot/dts/r8a7744.dtsi
> > +++ b/arch/arm/boot/dts/r8a7744.dtsi
> > @@ -15,6 +15,18 @@
> >  #address-cells = <2>;
> >  #size-cells = <2>;
> >
> > +aliases {
> > +i2c0 = &i2c0;
> > +i2c1 = &i2c1;
> > +i2c2 = &i2c2;
> > +i2c3 = &i2c3;
> > +i2c4 = &i2c4;
> > +i2c5 = &i2c5;
> > +i2c6 = &iic0;
> > +i2c7 = &iic1;
> > +i2c8 = &iic3;
> > +};
> > +
>
> I believe we are moving away from adding aliases such as those above.
> Geert, can you comment on this?

I thought of removing this for the first instance.  But for  tools like i2cdetect, it works on index.

Basically we need to work out index from device name, if we don't have aliases.

Regards,
Biju

> Other than that this patch looks good to me.

> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH 04/22] ARM: dts: r8a7744: Add MMC node

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:17AM +0000, Biju Das wrote:
> Add MMC node to the DT of the r8a7744 SoC.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 05/22] ARM: dts: r8a7744-iwg20m: Add eMMC support

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:18AM +0000, Biju Das wrote:
> Add eMMC support for iWave RZ/G1N Qseven System On Module.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10 controller

[Simon Horman]

On Wed, Nov 28, 2018 at 02:15:55PM +0000, Biju Das wrote:
> 
> > -----Original Message-----
> > From: linux-renesas-soc-owner@vger.kernel.org <linux-renesas-soc-
> > owner@vger.kernel.org> On Behalf Of Simon Horman
> > Sent: 28 November 2018 13:24
> > To: Biju Das <biju.das@bp.renesas.com>
> > Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>; Rob Herring
> > <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Magnus
> > Damm <magnus.damm@gmail.com>; linux-renesas-soc@vger.kernel.org;
> > devicetree@vger.kernel.org; Geert Uytterhoeven
> > <geert+renesas@glider.be>; Chris Paterson
> > <Chris.Paterson2@renesas.com>; Fabrizio Castro
> > <fabrizio.castro@bp.renesas.com>
> > Subject: Re: [PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10
> > > >
> > > > On 11/27/2018 02:56 PM, Biju Das wrote:
> > > >
> > > > > Enable the SDHI0 controller on iWave RZ/G1N Qseven System On
> > Module.
> > > >
> > > >    Why your subject has SDHI10?
> > >
> > > It is a typo.
> > >
> > > Simon, Will you fix this while applying or do you want me to send V2?
> > > Please let me know.
> >
> > No need to repost for this.
> 
> Thanks Simon.

Thanks again,

I have now reviewed this patch and it looks fine to me but I will wait to
see if there are other reviews before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 07/22] ARM: dts: r8a7744: USB 2.0 host support

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:20AM +0000, Biju Das wrote:
> Describe internal PCI bridge devices, USB phy device and
> link PCI USB devices to USB phy.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 08/22] ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:21AM +0000, Biju Das wrote:
> Add usb dmac and hsusb device nodes on RZ/G1N SoC dtsi.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 09/22] ARM: dts: r8a7744: Add RWDT node

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:22AM +0000, Biju Das wrote:
> Add a device node for the Watchdog Timer (RWDT) controller on the Renesas
> RZ/G1N (r8a7744) SoC.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 10/22] ARM: dts: r8a7744: Add audio support

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:23AM +0000, Biju Das wrote:
> Add sound support for the RZ/G1N SoC (a.k.a. R8A7744).
> 
> This work is based on similar work done on the R8A7743 SoC.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 11/22] ARM: dts: r8a7744: Add DU support

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:24AM +0000, Biju Das wrote:
> Add du node to r8a7744 SoC DT. Boards that want to enable the DU
> need to specify the output topology.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 12/22] ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:25AM +0000, Biju Das wrote:
> This patch adds support for the camera daughter board which is
> connected to iWave's RZ/G1N Qseven carrier board.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH 01/22] ARM: dts: r8a7744: Add [H]SCIF{A|B} support

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Describe [H]SCIF{|A|B} ports in the R8A7744 device tree.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 02/22] ARM: dts: r8a7744: Add I2C and IIC support

[Geert Uytterhoeven]

Hi Biju,

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add the I2C[0-5] and IIC[0,1,3] devices nodes to the R8A7744 device tree.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks for your patch!

> --- a/arch/arm/boot/dts/r8a7744.dtsi
> +++ b/arch/arm/boot/dts/r8a7744.dtsi
> @@ -15,6 +15,18 @@
>         #address-cells = <2>;
>         #size-cells = <2>;
>
> +       aliases {
> +               i2c0 = &i2c0;
> +               i2c1 = &i2c1;
> +               i2c2 = &i2c2;
> +               i2c3 = &i2c3;
> +               i2c4 = &i2c4;
> +               i2c5 = &i2c5;
> +               i2c6 = &iic0;
> +               i2c7 = &iic1;
> +               i2c8 = &iic3;
> +       };

Please drop the i2c aliases. If needed at all, device aliases are board-specific
(for ports labeled e.g. "i2c0").

> +               iic3: i2c@e60b0000 {
> +                       /* doesn't need pinmux */
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       compatible = "renesas,iic-r8a7744",
> +                                    "renesas,rcar-gen2-iic",
> +                                    "renesas,rmobile-iic";

It seems iic3 on RZ/G1N is different, in that it does not support
automatic transmission.
This is a bit similar like on R-Car E3, where we dropped compatibility
with the generic version to indicate this.  But on RZ/G1N we cannot use
the same solution, as the limitation does not apply to all instances.

RZ/G1H and RZ/G1M have the same issue.

> +                       reg = <0 0xe60b0000 0 0x425>;
> +                       interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&cpg CPG_MOD 926>;
> +                       dmas = <&dmac0 0x77>, <&dmac0 0x78>,
> +                              <&dmac1 0x77>, <&dmac1 0x78>;
> +                       dma-names = "tx", "rx", "tx", "rx";
> +                       power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
> +                       resets = <&cpg 926>;
> +                       status = "disabled";
>                 };

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 03/22] ARM: dts: r8a7744: Add SDHI nodes

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add SDHI nodes to the DT of the r8a7744 SoC.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 04/22] ARM: dts: r8a7744: Add MMC node

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add MMC node to the DT of the r8a7744 SoC.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 08/22] ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add usb dmac and hsusb device nodes on RZ/G1N SoC dtsi.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 09/22] ARM: dts: r8a7744: Add RWDT node

[Geert Uytterhoeven]

Hi Biju,

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add a device node for the Watchdog Timer (RWDT) controller on the Renesas
> RZ/G1N (r8a7744) SoC.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks for your patch!

> --- a/arch/arm/boot/dts/r8a7744.dtsi
> +++ b/arch/arm/boot/dts/r8a7744.dtsi
> @@ -293,6 +293,16 @@
>                         reg = <0 0xe6160000 0 0x100>;
>                 };
>
> +               rwdt: watchdog@e6020000 {

Please preserve sort order (by address, per group of devices), by
inserting before gpio@e6050000.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 10/22] ARM: dts: r8a7744: Add audio support

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add sound support for the RZ/G1N SoC (a.k.a. R8A7744).
>
> This work is based on similar work done on the R8A7743 SoC.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 07/22] ARM: dts: r8a7744: USB 2.0 host support

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Describe internal PCI bridge devices, USB phy device and
> link PCI USB devices to USB phy.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 11/22] ARM: dts: r8a7744: Add DU support

[Geert Uytterhoeven]

Hi Biju,

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add du node to r8a7744 SoC DT. Boards that want to enable the DU
> need to specify the output topology.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks for your patch!

> --- a/arch/arm/boot/dts/r8a7744.dtsi
> +++ b/arch/arm/boot/dts/r8a7744.dtsi
> @@ -1300,8 +1300,17 @@
>                 };
>
>                 du: display@feb00000 {
> +                       compatible = "renesas,du-r8a7744";
>                         reg = <0 0xfeb00000 0 0x40000>,
>                               <0 0xfeb90000 0 0x1c>;
> +                       reg-names = "du", "lvds.0";

Please use the new DU/LVDS bindings, using a separate node for LVDS.

BTW, I believe the display won't work with a recent tree, unless you've added
a DT live patch drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7744.dts?

The same is true for RZ/G1M.

> +                       interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&cpg CPG_MOD 724>,
> +                                <&cpg CPG_MOD 723>,
> +                                <&cpg CPG_MOD 726>;
> +                       clock-names = "du.0", "du.1", "lvds.0";
> +                       status = "disabled";
>
>                         ports {
>                                 #address-cells = <1>;

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 13/22] ARM: dts: r8a7744: Add CAN support

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add the definitions for can0 and can1 to the r8a7744 SoC dtsi.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 14/22] ARM: dts: r8a7744: Add IRQC support

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Describe the IRQC interrupt controller in the r8a7744 device tree.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 15/22] ARM: dts: r8a7744: Add thermal device to DT

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> This patch instantiates the thermal sensor module with thermal-zone
> support.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 16/22] ARM: dts: r8a7744: Add CMT SoC specific support

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add CMT[01] support to SoC DT.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 18/22] ARM: dts: r8a7744: Add QSPI support

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add the DT node for the QSPI interface to the SoC dtsi.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 20/22] ARM: dts: r8a7744: Add MSIOF[012] support

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 21/22] ARM: dts: r8a7744: Add xhci support

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add a device node for the xhci controller on the Renesas
> RZ/G1N (r8a7744) SoC.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 22/22] ARM: dts: r8a7744: Add PCIe Controller device node

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:06 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add a device node for the PCIe controller on the Renesas
> RZ/G1N (r8a7744) SoC.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH 11/22] ARM: dts: r8a7744: Add DU support

[Biju Das]

Hi Geert,

Thanks for the feedback.

> Subject: Re: [PATCH 11/22] ARM: dts: r8a7744: Add DU support
>
> Hi Biju,
>
> On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > Add du node to r8a7744 SoC DT. Boards that want to enable the DU need
> > to specify the output topology.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
>
> Thanks for your patch!
>
> > --- a/arch/arm/boot/dts/r8a7744.dtsi
> > +++ b/arch/arm/boot/dts/r8a7744.dtsi
> > @@ -1300,8 +1300,17 @@
> >                 };
> >
> >                 du: display@feb00000 {
> > +                       compatible = "renesas,du-r8a7744";
> >                         reg = <0 0xfeb00000 0 0x40000>,
> >                               <0 0xfeb90000 0 0x1c>;
> > +                       reg-names = "du", "lvds.0";
>
> Please use the new DU/LVDS bindings, using a separate node for LVDS.
>
> BTW, I believe the display won't work with a recent tree, unless you've
> added a DT live patch drivers/gpu/drm/rcar-
> du/rcar_du_of_lvds_r8a7744.dts?
>
> The same is true for RZ/G1M.

So far we haven't enabled LVDS panel on board specific dtsi.

I have tested du  with below renesas-dev kernel version

Linux version 4.20.0-rc4-00127-g5ad8ac8 (biju@be1yocto) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #56 SMP Fri Nov 30 08:03:21 GMT 2018

[    1.942603] [drm] Device feb00000.display probed
root@iwg20m:~# modetest -M rcar-du
Encoders:
id      crtc    type    possible crtcs  possible clones
54      52      none    0x00000003      0x00000001

Connectors:
id      encoder status          name            size (mm)       modes   encoders
55      54      connected       HDMI-A-1        520x320         27      54
  modes:
        name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot)
  1920x1080 60 1920 1968 2000 2080 1080 1082 1087 1111 138000 flags: phsync, nvsync; type: preferred, driver
  1920x1080 60 1920 2008 2052 2200 1080 1084 1089 1125 148500 flags: phsync, pvsync; type: driver
  1920x1080 60 1920 2008 2052 2200 1080 1084 1089 1125 148352 flags: phsync, pvsync; type: driver
  1280x1024 75 1280 1296 1440 1688 1024 1025 1028 1066 135000 flags: phsync, pvsync; type: driver
  1280x1024 60 1280 1328 1440 1688 1024 1025 1028 1066 108000 flags: phsync, pvsync; type: driver
  1152x864 75 1152 1216 1344 1600 864 865 868 900 108000 flags: phsync, pvsync; type: driver
  1280x720 60 1280 1390 1430 1650 720 725 730 750 74250 flags: phsync, pvsync; type: driver
  1280x720 60 1280 1390 1430 1650 720 725 730 750 74176 flags: phsync, pvsync; type: driver
  1280x720 50 1280 1720 1760 1980 720 725 730 750 74250 flags: phsync, pvsync; type: driver
  1024x768 75 1024 1040 1136 1312 768 769 772 800 78750 flags: phsync, pvsync; type: driver
  1024x768 70 1024 1048 1184 1328 768 771 777 806 75000 flags: nhsync, nvsync; type: driver
  1024x768 60 1024 1048 1184 1344 768 771 777 806 65000 flags: nhsync, nvsync; type: driver
  1080x607 60 1080 1120 1232 1384 607 608 611 629 52210 flags: nhsync, pvsync; type:
  832x624 75 832 864 928 1152 624 625 628 667 57284 flags: nhsync, nvsync; type: driver
  800x600 75 800 816 896 1056 600 601 604 625 49500 flags: phsync, pvsync; type: driver
  800x600 72 800 856 976 1040 600 637 643 666 50000 flags: phsync, pvsync; type: driver
  800x600 60 800 840 968 1056 600 601 605 628 40000 flags: phsync, pvsync; type: driver
  800x600 56 800 824 896 1024 600 601 603 625 36000 flags: phsync, pvsync; type: driver
  720x576 50 720 732 796 864 576 581 586 625 27000 flags: nhsync, nvsync; type: driver
  720x480 60 720 736 798 858 480 489 495 525 27027 flags: nhsync, nvsync; type: driver
  720x480 60 720 736 798 858 480 489 495 525 27000 flags: nhsync, nvsync; type: driver
  640x480 75 640 656 720 840 480 481 484 500 31500 flags: nhsync, nvsync; type: driver
  640x480 73 640 664 704 832 480 489 492 520 31500 flags: nhsync, nvsync; type: driver
  640x480 67 640 704 768 864 480 483 486 525 30240 flags: nhsync, nvsync; type: driver
  640x480 60 640 656 752 800 480 490 492 525 25200 flags: nhsync, nvsync; type: driver
  640x480 60 640 656 752 800 480 490 492 525 25175 flags: nhsync, nvsync; type: driver
  720x400 70 720 738 846 900 400 412 414 449 28320 flags: nhsync, pvsync; type: driver


Also tested libdrm/kms tests.  It works fine with 4.20.0-rc4 kernel on renesas-dev branch.

Regards,
Biju



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

RE: [PATCH 11/22] ARM: dts: r8a7744: Add DU support

[Biju Das]

Hi Geert,

Thanks for the feedback.

> Subject: Re: [PATCH 11/22] ARM: dts: r8a7744: Add DU support
>
> Hi Biju,
>
> On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > Add du node to r8a7744 SoC DT. Boards that want to enable the DU need
> > to specify the output topology.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
>
> Thanks for your patch!
>
> > --- a/arch/arm/boot/dts/r8a7744.dtsi
> > +++ b/arch/arm/boot/dts/r8a7744.dtsi
> > @@ -1300,8 +1300,17 @@
> >                 };
> >
> >                 du: display@feb00000 {
> > +                       compatible = "renesas,du-r8a7744";
> >                         reg = <0 0xfeb00000 0 0x40000>,
> >                               <0 0xfeb90000 0 0x1c>;
> > +                       reg-names = "du", "lvds.0";
>
> Please use the new DU/LVDS bindings, using a separate node for LVDS.
>
> BTW, I believe the display won't work with a recent tree, unless you've
> added a DT live patch drivers/gpu/drm/rcar-
> du/rcar_du_of_lvds_r8a7744.dts?
>
> The same is true for RZ/G1M.

So far we haven't enabled LVDS panel on board specific dtsi.

I have tested du  with below renesas-dev kernel version

Linux version 4.20.0-rc4-00127-g5ad8ac8 (biju@be1yocto) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #56 SMP Fri Nov 30 08:03:21 GMT 2018

[    1.942603] [drm] Device feb00000.display probed
root@iwg20m:~# modetest -M rcar-du
Encoders:
id      crtc    type    possible crtcs  possible clones
54      52      none    0x00000003      0x00000001

Connectors:
id      encoder status          name            size (mm)       modes   encoders
55      54      connected       HDMI-A-1        520x320         27      54
  modes:
        name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot)
  1920x1080 60 1920 1968 2000 2080 1080 1082 1087 1111 138000 flags: phsync, nvsync; type: preferred, driver
  1920x1080 60 1920 2008 2052 2200 1080 1084 1089 1125 148500 flags: phsync, pvsync; type: driver
  1920x1080 60 1920 2008 2052 2200 1080 1084 1089 1125 148352 flags: phsync, pvsync; type: driver
  1280x1024 75 1280 1296 1440 1688 1024 1025 1028 1066 135000 flags: phsync, pvsync; type: driver
  1280x1024 60 1280 1328 1440 1688 1024 1025 1028 1066 108000 flags: phsync, pvsync; type: driver
  1152x864 75 1152 1216 1344 1600 864 865 868 900 108000 flags: phsync, pvsync; type: driver
  1280x720 60 1280 1390 1430 1650 720 725 730 750 74250 flags: phsync, pvsync; type: driver
  1280x720 60 1280 1390 1430 1650 720 725 730 750 74176 flags: phsync, pvsync; type: driver
  1280x720 50 1280 1720 1760 1980 720 725 730 750 74250 flags: phsync, pvsync; type: driver
  1024x768 75 1024 1040 1136 1312 768 769 772 800 78750 flags: phsync, pvsync; type: driver
  1024x768 70 1024 1048 1184 1328 768 771 777 806 75000 flags: nhsync, nvsync; type: driver
  1024x768 60 1024 1048 1184 1344 768 771 777 806 65000 flags: nhsync, nvsync; type: driver
  1080x607 60 1080 1120 1232 1384 607 608 611 629 52210 flags: nhsync, pvsync; type:
  832x624 75 832 864 928 1152 624 625 628 667 57284 flags: nhsync, nvsync; type: driver
  800x600 75 800 816 896 1056 600 601 604 625 49500 flags: phsync, pvsync; type: driver
  800x600 72 800 856 976 1040 600 637 643 666 50000 flags: phsync, pvsync; type: driver
  800x600 60 800 840 968 1056 600 601 605 628 40000 flags: phsync, pvsync; type: driver
  800x600 56 800 824 896 1024 600 601 603 625 36000 flags: phsync, pvsync; type: driver
  720x576 50 720 732 796 864 576 581 586 625 27000 flags: nhsync, nvsync; type: driver
  720x480 60 720 736 798 858 480 489 495 525 27027 flags: nhsync, nvsync; type: driver
  720x480 60 720 736 798 858 480 489 495 525 27000 flags: nhsync, nvsync; type: driver
  640x480 75 640 656 720 840 480 481 484 500 31500 flags: nhsync, nvsync; type: driver
  640x480 73 640 664 704 832 480 489 492 520 31500 flags: nhsync, nvsync; type: driver
  640x480 67 640 704 768 864 480 483 486 525 30240 flags: nhsync, nvsync; type: driver
  640x480 60 640 656 752 800 480 490 492 525 25200 flags: nhsync, nvsync; type: driver
  640x480 60 640 656 752 800 480 490 492 525 25175 flags: nhsync, nvsync; type: driver
  720x400 70 720 738 846 900 400 412 414 449 28320 flags: nhsync, pvsync; type: driver


Also tested libdrm/kms tests.  It works fine with 4.20.0-rc4 kernel on renesas-dev branch.

Regards,
Biju



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH 05/22] ARM: dts: r8a7744-iwg20m: Add eMMC support

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add eMMC support for iWave RZ/G1N Qseven System On Module.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

I assume the PCB is the same for RZ/G1M and RZ/G1N, so perhaps this
can be factored out in a common .dtsi file, like we did for Salvator-X(S)?

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 06/22] ARM: dts: r8a7744-iwg20m: Enable SDHI10 controller

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Enable the SDHI0 controller on iWave RZ/G1N Qseven System On Module.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support

[Geert Uytterhoeven]

Hi Biju,

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> Add support for the SPI NOR device used to boot up the system
> to the iWave RZ/G1N Qseven System On Module DT.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks for your patch!

> --- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
> +++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi

> @@ -53,6 +58,27 @@
>         status = "okay";
>  };
>
> +&qspi {
> +       pinctrl-0 = <&qspi_pins>;
> +       pinctrl-names = "default";
> +
> +       status = "okay";
> +
> +       /* WARNING - This device contains the bootloader. Handle with care. */
> +       flash: flash@0 {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               compatible = "sst,sst25vf016b", "jedec,spi-nor";

According to the schematics, this is an ISSI IS25LP016D?
ISSI was acquired by GigaDevice, according to Wikipedia.
While SST is now MicroChip.

> +               reg = <0>;
> +               spi-max-frequency = <50000000>;
> +               spi-tx-bus-width = <1>;
> +               spi-rx-bus-width = <1>;

<1> is the default, but it's indeed good to make this explicit, as this is
a QSPI device with 2 unwired data pins.
However, as the device seems to support dual transfers, and dual mode
uses the standard MOSI/MISO pins, you should use <2> for both.
The RSPI driver supports this.

The same applies to the RZ/G1M version.

> +               m25p,fast-read;
> +               spi-cpol;
> +               spi-cpha;
> +       };
> +};

Apart from that:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 12/22] ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> This patch adds support for the camera daughter board which is
> connected to iWave's RZ/G1N Qseven carrier board.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support

[Biju Das]

Hi Geert,

Thanks for the feedback.

> Subject: Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support
>
> Hi Biju,
>
> On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > Add support for the SPI NOR device used to boot up the system to the
> > iWave RZ/G1N Qseven System On Module DT.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
>
> Thanks for your patch!
>
> > --- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
> > +++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
>
> > @@ -53,6 +58,27 @@
> >         status = "okay";
> >  };
> >
> > +&qspi {
> > +       pinctrl-0 = <&qspi_pins>;
> > +       pinctrl-names = "default";
> > +
> > +       status = "okay";
> > +
> > +       /* WARNING - This device contains the bootloader. Handle with care.
> */
> > +       flash: flash@0 {
> > +               #address-cells = <1>;
> > +               #size-cells = <1>;
> > +               compatible = "sst,sst25vf016b", "jedec,spi-nor";
>
> According to the schematics, this is an ISSI IS25LP016D?
> ISSI was acquired by GigaDevice, according to Wikipedia.
> While SST is now MicroChip.

As per the schematic and BoM,  it is.
IC FLASH 16MBIT 50MHZ 8SOIC SST25VF016B-50-4I-S2AF Microchip Technology 1 U1

I agree for RZ/G1C, it is ISSI IS25LP016D.

>
> > +               reg = <0>;
> > +               spi-max-frequency = <50000000>;
> > +               spi-tx-bus-width = <1>;
> > +               spi-rx-bus-width = <1>;
>
> <1> is the default, but it's indeed good to make this explicit, as this is a QSPI
> device with 2 unwired data pins.
> However, as the device seems to support dual transfers, and dual mode uses
> the standard MOSI/MISO pins, you should use <2> for both.
> The RSPI driver supports this.
>
> The same applies to the RZ/G1M version.

SST25VF016B this doesn't support dual mode.

Please let me know are you ok with this findings.

> > +               m25p,fast-read;
> > +               spi-cpol;
> > +               spi-cpha;
> > +       };
> > +};
>
> Apart from that:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Regards,
Biju



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

RE: [PATCH 05/22] ARM: dts: r8a7744-iwg20m: Add eMMC support

[Biju Das]

Hi Geert,

Thanks for the feedback.

> Subject: Re: [PATCH 05/22] ARM: dts: r8a7744-iwg20m: Add eMMC support
>
> On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > Add eMMC support for iWave RZ/G1N Qseven System On Module.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> I assume the PCB is the same for RZ/G1M and RZ/G1N, so perhaps this can
> be factored out in a common .dtsi file, like we did for Salvator-X(S)?

SoM is different between RZ/G1M and RZ/G1N in terms of memory and PCie/SATA.

The only common part in SoM is eMMC,SDHI0 and QSPI flash. So it doesn't make sense to factored it out.

What do you think?

Regards,
Biju



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support

[Geert Uytterhoeven]

Hi Biju,

On Fri, Nov 30, 2018 at 11:34 AM Biju Das <biju.das@bp.renesas.com> wrote:
> > Subject: Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support
> > On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > > Add support for the SPI NOR device used to boot up the system to the
> > > iWave RZ/G1N Qseven System On Module DT.
> > >
> > > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> >
> > Thanks for your patch!
> >
> > > --- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
> > > +++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
> >
> > > @@ -53,6 +58,27 @@
> > >         status = "okay";
> > >  };
> > >
> > > +&qspi {
> > > +       pinctrl-0 = <&qspi_pins>;
> > > +       pinctrl-names = "default";
> > > +
> > > +       status = "okay";
> > > +
> > > +       /* WARNING - This device contains the bootloader. Handle with care.
> > */
> > > +       flash: flash@0 {
> > > +               #address-cells = <1>;
> > > +               #size-cells = <1>;
> > > +               compatible = "sst,sst25vf016b", "jedec,spi-nor";
> >
> > According to the schematics, this is an ISSI IS25LP016D?
> > ISSI was acquired by GigaDevice, according to Wikipedia.
> > While SST is now MicroChip.
>
> As per the schematic and BoM,  it is.
> IC FLASH 16MBIT 50MHZ 8SOIC SST25VF016B-50-4I-S2AF Microchip Technology 1 U1

Oh, this seems to differ for different revisions of the schematics.
R5.1 has the ISSI part, R3.4 has the SST part.

Due to "jedec,spi-nor", it will auto-detect, but IIRC, the driver will warn
if the compatible doesn't match the detected part, which thus may happen
for some boards.

> > > +               reg = <0>;
> > > +               spi-max-frequency = <50000000>;
> > > +               spi-tx-bus-width = <1>;
> > > +               spi-rx-bus-width = <1>;
> >
> > <1> is the default, but it's indeed good to make this explicit, as this is a QSPI
> > device with 2 unwired data pins.
> > However, as the device seems to support dual transfers, and dual mode uses
> > the standard MOSI/MISO pins, you should use <2> for both.
> > The RSPI driver supports this.
> >
> > The same applies to the RZ/G1M version.
>
> SST25VF016B this doesn't support dual mode.

OK.

So some boards have a dual-capable part, others don't.

I'm not 100% sure, but I think writing <2> will still work, as the driver
won't use dual mode on the SST25VF016B part, due to lack of
SPI_NOR_DUAL_READ in the entry in the spi-nor driver.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support

[Biju Das]

Hi Geert,

Thanks for the feedback.

> Subject: Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support
>
> Hi Biju,
>
> On Fri, Nov 30, 2018 at 11:34 AM Biju Das <biju.das@bp.renesas.com> wrote:
> > > Subject: Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR
> > > support On Tue, Nov 27, 2018 at 1:05 PM Biju Das
> <biju.das@bp.renesas.com> wrote:
> > > > Add support for the SPI NOR device used to boot up the system to
> > > > the iWave RZ/G1N Qseven System On Module DT.
> > > >
> > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > >
> > > Thanks for your patch!
> > >
> > > > --- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
> > > > +++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
> > >
> > > > @@ -53,6 +58,27 @@
> > > >         status = "okay";
> > > >  };
> > > >
> > > > +&qspi {
> > > > +       pinctrl-0 = <&qspi_pins>;
> > > > +       pinctrl-names = "default";
> > > > +
> > > > +       status = "okay";
> > > > +
> > > > +       /* WARNING - This device contains the bootloader. Handle with
> care.
> > > */
> > > > +       flash: flash@0 {
> > > > +               #address-cells = <1>;
> > > > +               #size-cells = <1>;
> > > > +               compatible = "sst,sst25vf016b", "jedec,spi-nor";
> > >
> > > According to the schematics, this is an ISSI IS25LP016D?
> > > ISSI was acquired by GigaDevice, according to Wikipedia.
> > > While SST is now MicroChip.
> >
> > As per the schematic and BoM,  it is.
> > IC FLASH 16MBIT 50MHZ 8SOIC SST25VF016B-50-4I-S2AF Microchip
> > Technology 1 U1
>
> Oh, this seems to differ for different revisions of the schematics.
> R5.1 has the ISSI part, R3.4 has the SST part.
>
> Due to "jedec,spi-nor", it will auto-detect, but IIRC, the driver will warn if the
> compatible doesn't match the detected part, which thus may happen for
> some boards.

OK. Will remove "sst" part for the compatible string.

> > > > +               reg = <0>;
> > > > +               spi-max-frequency = <50000000>;
> > > > +               spi-tx-bus-width = <1>;
> > > > +               spi-rx-bus-width = <1>;
> > >
> > > <1> is the default, but it's indeed good to make this explicit, as
> > > this is a QSPI device with 2 unwired data pins.
> > > However, as the device seems to support dual transfers, and dual
> > > mode uses the standard MOSI/MISO pins, you should use <2> for both.
> > > The RSPI driver supports this.
> > >
> > > The same applies to the RZ/G1M version.
> >
> > SST25VF016B this doesn't support dual mode.
>
> OK.
>
> So some boards have a dual-capable part, others don't.
>
> I'm not 100% sure, but I think writing <2> will still work, as the driver won't
> use dual mode on the SST25VF016B part, due to lack of
> SPI_NOR_DUAL_READ in the entry in the spi-nor driver.

OK. Will check this.

Regards,
Biju



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

RE: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support

[Biju Das]

Hi Geert,

Thanks for the feedback.

> Subject: Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support
>
> Hi Biju,
>
> On Fri, Nov 30, 2018 at 11:34 AM Biju Das <biju.das@bp.renesas.com> wrote:
> > > Subject: Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR
> > > support On Tue, Nov 27, 2018 at 1:05 PM Biju Das
> <biju.das@bp.renesas.com> wrote:
> > > > Add support for the SPI NOR device used to boot up the system to
> > > > the iWave RZ/G1N Qseven System On Module DT.
> > > >
> > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > >
> > > Thanks for your patch!
> > >
> > > > --- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
> > > > +++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
> > >
> > > > @@ -53,6 +58,27 @@
> > > >         status = "okay";
> > > >  };
> > > >
> > > > +&qspi {
> > > > +       pinctrl-0 = <&qspi_pins>;
> > > > +       pinctrl-names = "default";
> > > > +
> > > > +       status = "okay";
> > > > +
> > > > +       /* WARNING - This device contains the bootloader. Handle with
> care.
> > > */
> > > > +       flash: flash@0 {
> > > > +               #address-cells = <1>;
> > > > +               #size-cells = <1>;
> > > > +               compatible = "sst,sst25vf016b", "jedec,spi-nor";
> > >
> > > According to the schematics, this is an ISSI IS25LP016D?
> > > ISSI was acquired by GigaDevice, according to Wikipedia.
> > > While SST is now MicroChip.
> >
> > As per the schematic and BoM,  it is.
> > IC FLASH 16MBIT 50MHZ 8SOIC SST25VF016B-50-4I-S2AF Microchip
> > Technology 1 U1
>
> Oh, this seems to differ for different revisions of the schematics.
> R5.1 has the ISSI part, R3.4 has the SST part.
>
> Due to "jedec,spi-nor", it will auto-detect, but IIRC, the driver will warn if the
> compatible doesn't match the detected part, which thus may happen for
> some boards.

OK. Will remove "sst" part for the compatible string.

> > > > +               reg = <0>;
> > > > +               spi-max-frequency = <50000000>;
> > > > +               spi-tx-bus-width = <1>;
> > > > +               spi-rx-bus-width = <1>;
> > >
> > > <1> is the default, but it's indeed good to make this explicit, as
> > > this is a QSPI device with 2 unwired data pins.
> > > However, as the device seems to support dual transfers, and dual
> > > mode uses the standard MOSI/MISO pins, you should use <2> for both.
> > > The RSPI driver supports this.
> > >
> > > The same applies to the RZ/G1M version.
> >
> > SST25VF016B this doesn't support dual mode.
>
> OK.
>
> So some boards have a dual-capable part, others don't.
>
> I'm not 100% sure, but I think writing <2> will still work, as the driver won't
> use dual mode on the SST25VF016B part, due to lack of
> SPI_NOR_DUAL_READ in the entry in the spi-nor driver.

OK. Will check this.

Regards,
Biju



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH 05/22] ARM: dts: r8a7744-iwg20m: Add eMMC support

[Geert Uytterhoeven]

Hi Biju,

On Fri, Nov 30, 2018 at 11:43 AM Biju Das <biju.das@bp.renesas.com> wrote:
> > Subject: Re: [PATCH 05/22] ARM: dts: r8a7744-iwg20m: Add eMMC support
> >
> > On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > > Add eMMC support for iWave RZ/G1N Qseven System On Module.
> > >
> > > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> >
> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> >
> > I assume the PCB is the same for RZ/G1M and RZ/G1N, so perhaps this can
> > be factored out in a common .dtsi file, like we did for Salvator-X(S)?
>
> SoM is different between RZ/G1M and RZ/G1N in terms of memory and PCie/SATA.
>
> The only common part in SoM is eMMC,SDHI0 and QSPI flash. So it doesn't make sense to factored it out.
>
> What do you think?

OK, then it's fine for me.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 12/22] ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB

[Simon Horman]

On Fri, Nov 30, 2018 at 11:04:02AM +0100, Geert Uytterhoeven wrote:
> On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > This patch adds support for the camera daughter board which is
> > connected to iWave's RZ/G1N Qseven carrier board.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, applied for v4.21.

Re: [PATCH 17/22] ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:30AM +0000, Biju Das wrote:
> The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules
> are SoC specific and should be part of board dts rather than SoM dtsi. By
> moving these nodes to the common dtsi it allows cmt and rwdt to be enabled
> on both of these boards with less lines of code.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>


Geert, did you miss this one when reviewing this series?

Re: [PATCH 18/22] ARM: dts: r8a7744: Add QSPI support

[Simon Horman]

On Fri, Nov 30, 2018 at 10:02:16AM +0100, Geert Uytterhoeven wrote:
> On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > Add the DT node for the QSPI interface to the SoC dtsi.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, applied for v4.21.

Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support

[Simon Horman]

On Fri, Nov 30, 2018 at 11:02:08AM +0000, Biju Das wrote:
> Hi Geert,
> 
> Thanks for the feedback.
> 
> > Subject: Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR support
> >
> > Hi Biju,
> >
> > On Fri, Nov 30, 2018 at 11:34 AM Biju Das <biju.das@bp.renesas.com> wrote:
> > > > Subject: Re: [PATCH 19/22] ARM: dts: r8a7744-iwg20m: Add SPI NOR
> > > > support On Tue, Nov 27, 2018 at 1:05 PM Biju Das
> > <biju.das@bp.renesas.com> wrote:
> > > > > Add support for the SPI NOR device used to boot up the system to
> > > > > the iWave RZ/G1N Qseven System On Module DT.
> > > > >
> > > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > > >
> > > > Thanks for your patch!
> > > >
> > > > > --- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
> > > > > +++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
> > > >
> > > > > @@ -53,6 +58,27 @@
> > > > >         status = "okay";
> > > > >  };
> > > > >
> > > > > +&qspi {
> > > > > +       pinctrl-0 = <&qspi_pins>;
> > > > > +       pinctrl-names = "default";
> > > > > +
> > > > > +       status = "okay";
> > > > > +
> > > > > +       /* WARNING - This device contains the bootloader. Handle with
> > care.
> > > > */
> > > > > +       flash: flash@0 {
> > > > > +               #address-cells = <1>;
> > > > > +               #size-cells = <1>;
> > > > > +               compatible = "sst,sst25vf016b", "jedec,spi-nor";
> > > >
> > > > According to the schematics, this is an ISSI IS25LP016D?
> > > > ISSI was acquired by GigaDevice, according to Wikipedia.
> > > > While SST is now MicroChip.
> > >
> > > As per the schematic and BoM,  it is.
> > > IC FLASH 16MBIT 50MHZ 8SOIC SST25VF016B-50-4I-S2AF Microchip
> > > Technology 1 U1
> >
> > Oh, this seems to differ for different revisions of the schematics.
> > R5.1 has the ISSI part, R3.4 has the SST part.
> >
> > Due to "jedec,spi-nor", it will auto-detect, but IIRC, the driver will warn if the
> > compatible doesn't match the detected part, which thus may happen for
> > some boards.
> 
> OK. Will remove "sst" part for the compatible string.

I have marked this patch as "Changes Requested" and am awaiting v2.

> 
> > > > > +               reg = <0>;
> > > > > +               spi-max-frequency = <50000000>;
> > > > > +               spi-tx-bus-width = <1>;
> > > > > +               spi-rx-bus-width = <1>;
> > > >
> > > > <1> is the default, but it's indeed good to make this explicit, as
> > > > this is a QSPI device with 2 unwired data pins.
> > > > However, as the device seems to support dual transfers, and dual
> > > > mode uses the standard MOSI/MISO pins, you should use <2> for both.
> > > > The RSPI driver supports this.
> > > >
> > > > The same applies to the RZ/G1M version.
> > >
> > > SST25VF016B this doesn't support dual mode.
> >
> > OK.
> >
> > So some boards have a dual-capable part, others don't.
> >
> > I'm not 100% sure, but I think writing <2> will still work, as the driver won't
> > use dual mode on the SST25VF016B part, due to lack of
> > SPI_NOR_DUAL_READ in the entry in the spi-nor driver.
> 
> OK. Will check this.
> 
> Regards,
> Biju
> 
> 
> 
> Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH 20/22] ARM: dts: r8a7744: Add MSIOF[012] support

[Simon Horman]

On Fri, Nov 30, 2018 at 10:02:49AM +0100, Geert Uytterhoeven wrote:
> On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, applied for v4.21.

Re: [PATCH 21/22] ARM: dts: r8a7744: Add xhci support

[Simon Horman]

On Fri, Nov 30, 2018 at 10:03:28AM +0100, Geert Uytterhoeven wrote:
> On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > Add a device node for the xhci controller on the Renesas
> > RZ/G1N (r8a7744) SoC.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, applied for v4.21.

Re: [PATCH 22/22] ARM: dts: r8a7744: Add PCIe Controller device node

[Simon Horman]

On Tue, Nov 27, 2018 at 11:56:35AM +0000, Biju Das wrote:
> Add a device node for the PCIe controller on the Renesas
> RZ/G1N (r8a7744) SoC.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Thanks, applied for v4.21.

Re: [PATCH 17/22] ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM

[Geert Uytterhoeven]

On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules
> are SoC specific and should be part of board dts rather than SoM dtsi. By
> moving these nodes to the common dtsi it allows cmt and rwdt to be enabled
> on both of these boards with less lines of code.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 17/22] ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM

[Simon Horman]

On Tue, Dec 04, 2018 at 03:55:28PM +0100, Geert Uytterhoeven wrote:
> On Tue, Nov 27, 2018 at 1:05 PM Biju Das <biju.das@bp.renesas.com> wrote:
> > The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules
> > are SoC specific and should be part of board dts rather than SoM dtsi. By
> > moving these nodes to the common dtsi it allows cmt and rwdt to be enabled
> > on both of these boards with less lines of code.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, applied for v4.21.