From: Stefan Wahren <stefan.wahren@i2se.com> To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Shawn Guo <shawnguo@kernel.org>, Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org, Sascha Hauer <s.hauer@pengutronix.de>, linux-imx@nxp.com, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/3] nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support Date: Tue, 11 Dec 2018 14:51:12 +0100 [thread overview] Message-ID: <1544536273-17909-3-git-send-email-stefan.wahren@i2se.com> (raw) In-Reply-To: <1544536273-17909-1-git-send-email-stefan.wahren@i2se.com> In comparision to the i.MX6UL the lower cost variants i.MX6ULL/ULZ only supports 8 OTP banks a 8 words. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- drivers/nvmem/imx-ocotp.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c index afb429a..a433a41 100644 --- a/drivers/nvmem/imx-ocotp.c +++ b/drivers/nvmem/imx-ocotp.c @@ -427,6 +427,12 @@ static const struct ocotp_params imx6ul_params = { .set_timing = imx_ocotp_set_imx6_timing, }; +static const struct ocotp_params imx6ull_params = { + .nregs = 64, + .bank_address_words = 0, + .set_timing = imx_ocotp_set_imx6_timing, +}; + static const struct ocotp_params imx7d_params = { .nregs = 64, .bank_address_words = 4, @@ -438,6 +444,7 @@ static const struct of_device_id imx_ocotp_dt_ids[] = { { .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params }, { .compatible = "fsl,imx6sx-ocotp", .data = &imx6sx_params }, { .compatible = "fsl,imx6ul-ocotp", .data = &imx6ul_params }, + { .compatible = "fsl,imx6ull-ocotp", .data = &imx6ull_params }, { .compatible = "fsl,imx7d-ocotp", .data = &imx7d_params }, { .compatible = "fsl,imx6sll-ocotp", .data = &imx6sll_params }, { }, -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <stefan.wahren@i2se.com> To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Shawn Guo <shawnguo@kernel.org>, Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org, Sascha Hauer <s.hauer@pengutronix.de>, linux-imx@nxp.com, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/3] nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support Date: Tue, 11 Dec 2018 14:51:12 +0100 [thread overview] Message-ID: <1544536273-17909-3-git-send-email-stefan.wahren@i2se.com> (raw) In-Reply-To: <1544536273-17909-1-git-send-email-stefan.wahren@i2se.com> In comparision to the i.MX6UL the lower cost variants i.MX6ULL/ULZ only supports 8 OTP banks a 8 words. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- drivers/nvmem/imx-ocotp.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c index afb429a..a433a41 100644 --- a/drivers/nvmem/imx-ocotp.c +++ b/drivers/nvmem/imx-ocotp.c @@ -427,6 +427,12 @@ static const struct ocotp_params imx6ul_params = { .set_timing = imx_ocotp_set_imx6_timing, }; +static const struct ocotp_params imx6ull_params = { + .nregs = 64, + .bank_address_words = 0, + .set_timing = imx_ocotp_set_imx6_timing, +}; + static const struct ocotp_params imx7d_params = { .nregs = 64, .bank_address_words = 4, @@ -438,6 +444,7 @@ static const struct of_device_id imx_ocotp_dt_ids[] = { { .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params }, { .compatible = "fsl,imx6sx-ocotp", .data = &imx6sx_params }, { .compatible = "fsl,imx6ul-ocotp", .data = &imx6ul_params }, + { .compatible = "fsl,imx6ull-ocotp", .data = &imx6ull_params }, { .compatible = "fsl,imx7d-ocotp", .data = &imx7d_params }, { .compatible = "fsl,imx6sll-ocotp", .data = &imx6sll_params }, { }, -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-11 13:51 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-12-11 13:51 [PATCH 0/3] nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support Stefan Wahren 2018-12-11 13:51 ` Stefan Wahren 2018-12-11 13:51 ` [PATCH 1/3] dt-bindings: imx-ocotp: Add " Stefan Wahren 2018-12-11 13:51 ` Stefan Wahren 2018-12-20 20:03 ` Rob Herring 2018-12-20 20:03 ` Rob Herring 2018-12-11 13:51 ` Stefan Wahren [this message] 2018-12-11 13:51 ` [PATCH 2/3] nvmem: imx-ocotp: Implement " Stefan Wahren 2018-12-11 13:51 ` [PATCH 3/3] ARM: dts: imx6ull: Fix i.MX6ULL/ULZ ocotp compatible Stefan Wahren 2018-12-11 13:51 ` Stefan Wahren 2019-01-15 14:53 ` Shawn Guo 2019-01-15 14:53 ` Shawn Guo 2019-01-15 10:17 ` [PATCH 0/3] nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support Stefan Wahren 2019-01-15 10:17 ` Stefan Wahren 2019-01-15 10:21 ` Srinivas Kandagatla 2019-01-15 10:21 ` Srinivas Kandagatla 2019-01-15 12:15 ` Srinivas Kandagatla 2019-01-15 12:15 ` Srinivas Kandagatla
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1544536273-17909-3-git-send-email-stefan.wahren@i2se.com \ --to=stefan.wahren@i2se.com \ --cc=devicetree@vger.kernel.org \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=srinivas.kandagatla@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.