From: Fabrizio Castro <fabrizio.castro@bp.renesas.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Wolfgang Grandegger <wg@grandegger.com>, Marc Kleine-Budde <mkl@pengutronix.de>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org> Cc: "Biju Das" <biju.das@bp.renesas.com>, "Simon Horman" <horms@verge.net.au>, "Magnus Damm" <magnus.damm@gmail.com>, "David S. Miller" <davem@davemloft.net>, "Geert Uytterhoeven" <geert+renesas@glider.be>, "Thierry Reding" <treding@nvidia.com>, "Andreas Färber" <afaerber@suse.de>, "Alexandre Belloni" <alexandre.belloni@bootlin.com>, "Kevin Hilman" <khilman@baylibre.com>, "Johan Hovold" <johan@kernel.org>, "Lukasz Majewski" <lukma@denx.de>, "Michal Simek" <monstr@monstr.eu>, "Michal Vokáč" <michal.vokac@ysoft.com>, "Martin Blumenstingl" <martin.blumenstingl@googlemail.com>, "Ben Whitten" <ben.whitten@gmail.com>, "Fabrizio Castro" <fabrizio.castro@bp.renesas.com>, "Chris Paterson" <Chris.Paterson2@renesas.com>, linux-renesas-soc@vger.kernel.org Subject: [PATCH 06/11] arm64: dts: renesas: r8a774c0-cat874: Add uSD support Date: Wed, 16 Jan 2019 18:37:49 +0000 [thread overview] Message-ID: <1547663874-29411-7-git-send-email-fabrizio.castro@bp.renesas.com> (raw) In-Reply-To: <1547663874-29411-1-git-send-email-fabrizio.castro@bp.renesas.com> From: Biju Das <biju.das@bp.renesas.com> This patch adds uSD card support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> --- arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 50 +++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index c545ce5..477a56b 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r8a774c0.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Silicon Linux RZ/G2E 96board platform (CAT874)"; @@ -26,6 +27,29 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x78000000>; }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; }; &extal_clk { @@ -37,6 +61,18 @@ groups = "scif2_data_a"; function = "scif2"; }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; }; &scif2 { @@ -45,3 +81,17 @@ status = "okay"; }; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Wolfgang Grandegger <wg@grandegger.com>, Marc Kleine-Budde <mkl@pengutronix.de>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org> Cc: "Biju Das" <biju.das@bp.renesas.com>, "Simon Horman" <horms@verge.net.au>, "Magnus Damm" <magnus.damm@gmail.com>, "David S. Miller" <davem@davemloft.net>, "Geert Uytterhoeven" <geert+renesas@glider.be>, "Thierry Reding" <treding@nvidia.com>, "Andreas Färber" <afaerber@suse.de>, "Alexandre Belloni" <alexandre.belloni@bootlin.com>, "Kevin Hilman" <khilman@baylibre.com>, "Johan Hovold" <johan@kernel.org>, "Lukasz Majewski" <lukma@denx.de>, "Michal Simek" <monstr@monstr.eu>, "Michal Vokáč" <michal.vokac@ysoft.com>, "Martin Blumenstingl" <martin.blumenstingl@googlemail.com>, "Ben Whitten" <ben.whitten@gmail.com>, "Fabrizio Castro" <fabrizio.castro@bp.renesas.com>, "Chris Paterson" <Chris.Paterson2@renesas.com>, linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-can@vger.kernel.org, netdev@vger.kernel.org, linux-clk@vger.kernel.org, ebiharaml@si-linux.co.jp Subject: [PATCH 06/11] arm64: dts: renesas: r8a774c0-cat874: Add uSD support Date: Wed, 16 Jan 2019 18:37:49 +0000 [thread overview] Message-ID: <1547663874-29411-7-git-send-email-fabrizio.castro@bp.renesas.com> (raw) In-Reply-To: <1547663874-29411-1-git-send-email-fabrizio.castro@bp.renesas.com> From: Biju Das <biju.das@bp.renesas.com> This patch adds uSD card support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> --- arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 50 +++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index c545ce5..477a56b 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r8a774c0.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Silicon Linux RZ/G2E 96board platform (CAT874)"; @@ -26,6 +27,29 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x78000000>; }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; }; &extal_clk { @@ -37,6 +61,18 @@ groups = "scif2_data_a"; function = "scif2"; }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; }; &scif2 { @@ -45,3 +81,17 @@ status = "okay"; }; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; -- 2.7.4
next prev parent reply other threads:[~2019-01-16 18:37 UTC|newest] Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-01-16 18:37 [PATCH 00/11] Add basic EK874 support Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-16 18:37 ` [PATCH 01/11] dt-bindings: Add vendor prefix for Silicon Linux Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-17 10:44 ` Simon Horman 2019-01-17 10:44 ` Simon Horman 2019-01-17 11:17 ` Andreas Färber 2019-01-17 11:17 ` Andreas Färber 2019-01-17 12:19 ` Simon Horman 2019-01-17 12:19 ` Simon Horman 2019-01-17 12:23 ` Chris Paterson 2019-01-17 12:23 ` Chris Paterson 2019-01-22 1:14 ` Rob Herring 2019-01-22 1:14 ` Rob Herring 2019-02-14 16:21 ` Fabrizio Castro 2019-02-14 16:21 ` Fabrizio Castro 2019-02-15 6:52 ` Lukasz Majewski 2019-02-15 6:52 ` Lukasz Majewski 2019-02-15 9:09 ` Andreas Färber 2019-02-15 9:09 ` Andreas Färber 2019-03-01 12:03 ` Fabrizio Castro 2019-03-01 12:03 ` Fabrizio Castro 2019-03-04 9:40 ` Simon Horman 2019-03-04 9:40 ` Simon Horman 2019-01-16 18:37 ` [PATCH 02/11] dt-bindings: arm: renesas: Add si-linux cat87[45] boards Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-17 10:51 ` Simon Horman 2019-01-17 10:51 ` Simon Horman 2019-01-17 12:32 ` Chris Paterson 2019-01-17 12:32 ` Chris Paterson 2019-01-17 12:59 ` Simon Horman 2019-01-17 12:59 ` Simon Horman 2019-01-22 14:49 ` Simon Horman 2019-01-22 14:49 ` Simon Horman 2019-01-16 18:37 ` [PATCH 03/11] arm64: dts: renesas: Add Si-Linux CAT874 board support Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-17 11:04 ` Geert Uytterhoeven 2019-01-17 11:04 ` Geert Uytterhoeven 2019-01-22 14:52 ` Simon Horman 2019-01-22 14:52 ` Simon Horman 2019-01-16 18:37 ` [PATCH 04/11] arm64: dts: renesas: Add Si-Linux EK874 " Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-17 11:05 ` Geert Uytterhoeven 2019-01-17 11:05 ` Geert Uytterhoeven 2019-01-22 14:53 ` Simon Horman 2019-01-22 14:53 ` Simon Horman 2019-01-16 18:37 ` [PATCH 05/11] arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2 Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-17 11:06 ` Geert Uytterhoeven 2019-01-17 11:06 ` Geert Uytterhoeven 2019-01-22 14:54 ` Simon Horman 2019-01-22 14:54 ` Simon Horman 2019-01-16 18:37 ` Fabrizio Castro [this message] 2019-01-16 18:37 ` [PATCH 06/11] arm64: dts: renesas: r8a774c0-cat874: Add uSD support Fabrizio Castro 2019-01-17 11:11 ` Simon Horman 2019-01-17 11:11 ` Simon Horman 2019-01-17 13:19 ` Fabrizio Castro 2019-01-17 13:19 ` Fabrizio Castro 2019-01-20 8:28 ` Simon Horman 2019-01-20 8:28 ` Simon Horman 2019-01-22 14:55 ` Simon Horman 2019-01-22 14:55 ` Simon Horman 2019-01-16 18:37 ` [PATCH 07/11] arm64: dts: renesas: cat875: Add ethernet support Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-17 11:59 ` Simon Horman 2019-01-17 11:59 ` Simon Horman 2019-01-17 13:27 ` Fabrizio Castro 2019-01-17 13:27 ` Fabrizio Castro 2019-01-20 8:28 ` Simon Horman 2019-01-20 8:28 ` Simon Horman 2019-01-22 14:55 ` Simon Horman 2019-01-22 14:55 ` Simon Horman 2019-01-16 18:37 ` [PATCH 08/11] clk: renesas: r8a774c0: Add missing CANFD clock Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-16 19:05 ` Geert Uytterhoeven 2019-01-16 19:05 ` Geert Uytterhoeven 2019-01-16 19:24 ` Fabrizio Castro 2019-01-16 19:24 ` Fabrizio Castro 2019-01-16 18:37 ` [PATCH 09/11] dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-17 12:01 ` Simon Horman 2019-01-17 12:01 ` Simon Horman 2019-01-22 1:15 ` Rob Herring 2019-01-22 1:15 ` Rob Herring 2019-03-01 11:52 ` Fabrizio Castro 2019-03-01 11:52 ` Fabrizio Castro 2019-01-16 18:37 ` [PATCH 10/11] arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-17 12:05 ` Simon Horman 2019-01-17 12:05 ` Simon Horman 2019-01-28 13:02 ` Simon Horman 2019-01-28 13:02 ` Simon Horman 2019-03-19 11:12 ` Fabrizio Castro 2019-03-19 11:12 ` Fabrizio Castro 2019-03-19 11:54 ` Simon Horman 2019-03-19 11:54 ` Simon Horman 2019-01-16 18:37 ` [PATCH 11/11] dt-bindings: can: rcar_canfd: document r8a774c0 support Fabrizio Castro 2019-01-16 18:37 ` Fabrizio Castro 2019-01-17 12:11 ` Simon Horman 2019-01-17 12:11 ` Simon Horman 2019-01-22 1:15 ` Rob Herring 2019-01-22 1:15 ` Rob Herring 2019-03-01 11:56 ` Fabrizio Castro 2019-03-01 11:56 ` Fabrizio Castro
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1547663874-29411-7-git-send-email-fabrizio.castro@bp.renesas.com \ --to=fabrizio.castro@bp.renesas.com \ --cc=Chris.Paterson2@renesas.com \ --cc=afaerber@suse.de \ --cc=alexandre.belloni@bootlin.com \ --cc=ben.whitten@gmail.com \ --cc=biju.das@bp.renesas.com \ --cc=davem@davemloft.net \ --cc=geert+renesas@glider.be \ --cc=horms@verge.net.au \ --cc=johan@kernel.org \ --cc=khilman@baylibre.com \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=lukma@denx.de \ --cc=magnus.damm@gmail.com \ --cc=mark.rutland@arm.com \ --cc=martin.blumenstingl@googlemail.com \ --cc=michal.vokac@ysoft.com \ --cc=mkl@pengutronix.de \ --cc=monstr@monstr.eu \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=treding@nvidia.com \ --cc=wg@grandegger.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.