[PATCH 1/2] dt-bindings: input: touchscreen: st1232i: reference common DT bindings

[PATCH 1/2] dt-bindings: input: touchscreen: st1232i: reference common DT bindings

[Matthias Fend]

Add a reference to common touchscreen bindings which are also partly
supported.

Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net>
---
 Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
index 64ad48b..f3046e7 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
@@ -8,6 +8,8 @@ Required properties:
 Optional properties:
 - gpios: a phandle to the reset GPIO
 
+For additional optional properties see: touchscreen.txt
+
 Example:
 
 	i2c@00000000 {
-- 
2.7.4


Matthias Fend
R&D Electronics 

Wolfvision GmbH
Oberes Ried 14 | 6833 Klaus | Austria 
Tel: +43 5523 52250 | Mail: Matthias.Fend@wolfvision.net 

Webpage: www.wolfvision.com | www.wolfvision.com/green
Firmenbuch / Commercial Register: FN283521v Feldkirch/Austria

[PATCH 2/2] Input: st1232 - handle common DT bindings

[Matthias Fend]

This is required to specify generic touchscreen properties via DT.

Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net>
---
 drivers/input/touchscreen/st1232.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 11ff32c..ad617ac 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -21,6 +21,7 @@
 #include <linux/pm_qos.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/input/touchscreen.h>
 
 #define ST1232_TS_NAME	"st1232-ts"
 
@@ -195,6 +196,7 @@ static int st1232_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0);
+	touchscreen_parse_properties(input_dev, true, NULL);
 
 	error = devm_request_threaded_irq(&client->dev, client->irq,
 					  NULL, st1232_ts_irq_handler,
-- 
2.7.4


Matthias Fend
R&D Electronics 

Wolfvision GmbH
Oberes Ried 14 | 6833 Klaus | Austria 
Tel: +43 5523 52250 | Mail: Matthias.Fend@wolfvision.net 

Webpage: www.wolfvision.com | www.wolfvision.com/green
Firmenbuch / Commercial Register: FN283521v Feldkirch/Austria

Re: [PATCH 2/2] Input: st1232 - handle common DT bindings

[dmitry.torokhov]

Hi Matthias,

On Mon, Jan 28, 2019 at 09:06:08AM +0000, Matthias Fend wrote:
> This is required to specify generic touchscreen properties via DT.
> 
> Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net>
> ---
>  drivers/input/touchscreen/st1232.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
> index 11ff32c..ad617ac 100644
> --- a/drivers/input/touchscreen/st1232.c
> +++ b/drivers/input/touchscreen/st1232.c
> @@ -21,6 +21,7 @@
>  #include <linux/pm_qos.h>
>  #include <linux/slab.h>
>  #include <linux/types.h>
> +#include <linux/input/touchscreen.h>
>  
>  #define ST1232_TS_NAME	"st1232-ts"
>  
> @@ -195,6 +196,7 @@ static int st1232_ts_probe(struct i2c_client *client,
>  	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
>  	input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0);
>  	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0);
> +	touchscreen_parse_properties(input_dev, true, NULL);

Do you think you could complete the conversion and also use
touchscreen_report_pos() to support common transformations (swap,
invert)?

Thanks!

-- 
Dmitry

Re: [PATCH 2/2] Input: st1232 - handle common DT bindings

['dmitry.torokhov@gmail.com']

On Mon, Feb 11, 2019 at 09:51:58AM +0100, Martin Kepplinger wrote:
> On 11.02.19 09:45, 'dmitry.torokhov@gmail.com' wrote:
> > Hi Matthias,
> > 
> > On Mon, Feb 11, 2019 at 07:15:12AM +0000, Matthias Fend wrote:
> >> Hi Dmitry,
> >>
> >> You asked me if I could also include the conversion to touchscreen_report_pos() - which I did in this patch version.
> >> Is there anything else missing?
> > 
> > Sorry, gmail decided to mark the v2 patches as spam for some reason :(
> > I fished them out and applied.
> > 
> > Matthias, Martin, I noticed that the driver is still using MT-A
> > protocol. Could you convert it to the proper MT-B (slotted) protocol?
> > 
> 
> Yes, I thought about that actually. type A protocol is what matches the
> controller here... It stores touch points consecutively in memory, but I
> doubt that it tracks them (by keeping them at one position in its
> memory, for instance). But yes, I want to test that.

We still can do MT-B for such devices by employing in-kernel contact
tracking. See input_mt_assign_slots().

Thanks.

-- 
Dmitry

Re: [PATCH 2/2] Input: st1232 - handle common DT bindings

[Martin Kepplinger]

[-- Attachment #1: Type: text/plain, Size: 861 bytes --]

On 11.02.19 09:45, 'dmitry.torokhov@gmail.com' wrote:
> Hi Matthias,
> 
> On Mon, Feb 11, 2019 at 07:15:12AM +0000, Matthias Fend wrote:
>> Hi Dmitry,
>>
>> You asked me if I could also include the conversion to touchscreen_report_pos() - which I did in this patch version.
>> Is there anything else missing?
> 
> Sorry, gmail decided to mark the v2 patches as spam for some reason :(
> I fished them out and applied.
> 
> Matthias, Martin, I noticed that the driver is still using MT-A
> protocol. Could you convert it to the proper MT-B (slotted) protocol?
> 

Yes, I thought about that actually. type A protocol is what matches the
controller here... It stores touch points consecutively in memory, but I
doubt that it tracks them (by keeping them at one position in its
memory, for instance). But yes, I want to test that.

                          martin

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3616 bytes --]

Re: [PATCH 2/2] Input: st1232 - handle common DT bindings

['dmitry.torokhov@gmail.com']

Hi Matthias,

On Mon, Feb 11, 2019 at 07:15:12AM +0000, Matthias Fend wrote:
> Hi Dmitry,
>
> You asked me if I could also include the conversion to touchscreen_report_pos() - which I did in this patch version.
> Is there anything else missing?

Sorry, gmail decided to mark the v2 patches as spam for some reason :(
I fished them out and applied.

Matthias, Martin, I noticed that the driver is still using MT-A
protocol. Could you convert it to the proper MT-B (slotted) protocol?

Thanks.

-- 
Dmitry