From: Abel Vesa <abel.vesa@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/22] mx6sabre: Add DM and SPL FIT support
Date: Tue, 29 Jan 2019 11:30:38 +0000 [thread overview]
Message-ID: <1548761421-8267-1-git-send-email-abel.vesa@nxp.com> (raw)
The first version is here:
https://lists.denx.de/pipermail/u-boot/2019-January/355196.html
Changes since v1:
* updated all the related dts[i] files from kernel v4.20 as suggested
by Fabio
* enabled multi-dtb in SPL to support one binary for all imx6[q|qp|dl]
* updated the board README files
* dropped support for EFI and DOS partition to decrease SPL size on
sabresd
Abel Vesa (22):
usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
usb: ehci-mx6: Make regulator DM_REGULATOR dependent
configs: imx6sabreauto: Add DM_MMC support
configs: imx6sabreauto: Add DM_USB support
mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
board: mx6sabresd: Add board_fit_config_name_match to support FIT in
SPL
board: mx6sabreauto: Add board_fit_config_name_match to support FIT in
SPL
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
arm: imx: Add FIT SPL its
configs: mx6sabreauto: Add SPL FIT and DM support
configs: mx6sabresd: Add SPL FIT and DM support
mx6sabreauto: Add DM_GPIO support
mx6sabresd: Add DM_GPIO support
configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
board: mx6sabreauto: Remove the non-DM code
board: mx6sabresd: Remove non-DM code
board: mx6sabresd: Remove the enet reset gpio handling
configs: mx6sabresd: Reduce size for SPL by disabling SPL_DOS and
SPL_EFI
board: mx6sabreauto: Update README with the SPL DM FIT info
board: mx6sabresd: Update README with the SPL DM FIT info
arch/arm/dts/Makefile | 8 +-
arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi | 6 +
arch/arm/dts/imx6dl-sabreauto.dts | 13 +
arch/arm/dts/imx6dl-sabresd-u-boot.dtsi | 6 +
arch/arm/dts/imx6dl-sabresd.dts | 18 +
arch/arm/dts/imx6dl.dtsi | 306 ++++++++++-
arch/arm/dts/imx6q-sabreauto-u-boot.dtsi | 6 +
arch/arm/dts/imx6q-sabreauto.dts | 18 +
arch/arm/dts/imx6q-sabresd-u-boot.dtsi | 6 +
arch/arm/dts/imx6q-sabresd.dts | 23 +
arch/arm/dts/imx6q.dtsi | 310 +++++++++--
arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi | 23 +
arch/arm/dts/imx6qdl-sabreauto.dtsi | 810 ++++++++++++++++++++++++++++
arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi | 14 +
arch/arm/dts/imx6qdl-sabresd.dtsi | 741 +++++++++++++++++++++++++
arch/arm/dts/imx6qdl-u-boot.dtsi | 4 +-
arch/arm/dts/imx6qdl.dtsi | 455 +++++++++-------
arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi | 6 +
arch/arm/dts/imx6qp-sabreauto.dts | 55 ++
arch/arm/dts/imx6qp-sabresd-u-boot.dtsi | 6 +
arch/arm/dts/imx6qp-sabresd.dts | 55 ++
arch/arm/dts/imx6qp.dtsi | 115 ++++
arch/arm/include/asm/arch-am33xx/spl.h | 2 +-
arch/arm/mach-imx/mx6/fit_spl.its | 41 ++
arch/arm/mach-omap2/boot-common.c | 2 +-
board/freescale/mx6sabreauto/README | 6 +-
board/freescale/mx6sabreauto/mx6sabreauto.c | 91 +---
board/freescale/mx6sabresd/README | 9 +-
board/freescale/mx6sabresd/mx6sabresd.c | 78 +--
common/Makefile | 5 +-
common/spl/Kconfig | 4 +-
common/spl/Makefile | 2 +-
common/spl/spl_usb.c | 4 -
configs/am43xx_evm_usbhost_boot_defconfig | 2 +-
configs/am43xx_hs_evm_defconfig | 2 +-
configs/mx6sabreauto_defconfig | 23 +-
configs/mx6sabresd_defconfig | 28 +-
drivers/mmc/fsl_esdhc.c | 8 +-
drivers/usb/host/ehci-mx6.c | 7 +-
39 files changed, 2906 insertions(+), 412 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6dl-sabreauto.dts
create mode 100644 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6dl-sabresd.dts
create mode 100644 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
create mode 100644 arch/arm/dts/imx6q-sabresd-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6q-sabresd.dts
create mode 100644 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6qdl-sabreauto.dtsi
create mode 100644 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi
create mode 100644 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6qp-sabreauto.dts
create mode 100644 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
create mode 100644 arch/arm/dts/imx6qp.dtsi
create mode 100644 arch/arm/mach-imx/mx6/fit_spl.its
--
2.7.4
next reply other threads:[~2019-01-29 11:30 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-29 11:30 Abel Vesa [this message]
2019-01-29 11:30 ` [U-Boot] [PATCH v2 01/22] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 02/22] usb: ehci-mx6: Make regulator DM_REGULATOR dependent Abel Vesa
2019-01-29 13:23 ` Peng Fan
2019-01-29 11:30 ` [U-Boot] [PATCH v2 03/22] configs: imx6sabreauto: Add DM_MMC support Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 04/22] configs: imx6sabreauto: Add DM_USB support Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 05/22] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds Abel Vesa
2019-01-29 13:29 ` Peng Fan
2019-01-30 12:15 ` Abel Vesa
2019-01-29 13:40 ` Adam Ford
2019-01-29 11:30 ` [U-Boot] [PATCH v2 06/22] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL Abel Vesa
2019-01-29 13:30 ` Peng Fan
2019-01-29 11:30 ` [U-Boot] [PATCH v2 07/22] board: mx6sabreauto: " Abel Vesa
2019-01-29 13:30 ` Peng Fan
2019-01-29 11:30 ` [U-Boot] [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files Abel Vesa
2019-01-29 13:33 ` Peng Fan
2019-01-30 8:22 ` Abel Vesa
2019-01-29 17:03 ` Tom Rini
2019-01-30 11:15 ` Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 09/22] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] Abel Vesa
2019-01-29 13:34 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 10/22] arm: imx: Add FIT SPL its Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 11/22] configs: mx6sabreauto: Add SPL FIT and DM support Abel Vesa
2019-01-29 13:38 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 12/22] configs: mx6sabresd: " Abel Vesa
2019-01-29 13:39 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 13/22] mx6sabreauto: Add DM_GPIO support Abel Vesa
2019-01-29 13:40 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 14/22] mx6sabresd: " Abel Vesa
2019-01-29 13:40 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 15/22] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs Abel Vesa
2019-01-29 13:41 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 16/22] configs: mx6sabresd: " Abel Vesa
2019-01-29 13:41 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 17/22] board: mx6sabreauto: Remove the non-DM code Abel Vesa
2019-01-29 13:43 ` Peng Fan
2019-01-30 8:19 ` Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 18/22] board: mx6sabresd: Remove " Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 19/22] board: mx6sabresd: Remove the enet reset gpio handling Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 20/22] configs: mx6sabresd: Reduce size for SPL by disabling SPL_DOS and SPL_EFI Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 21/22] board: mx6sabreauto: Update README with the SPL DM FIT info Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 22/22] board: mx6sabresd: " Abel Vesa
2019-01-29 13:37 ` [U-Boot] [PATCH v2 10/22] arm: imx: Add FIT SPL its Peng Fan
2019-01-29 14:04 ` Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548761421-8267-1-git-send-email-abel.vesa@nxp.com \
--to=abel.vesa@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.