All of lore.kernel.org
 help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 22/22] board: mx6sabresd: Update README with the SPL DM FIT info
Date: Tue, 29 Jan 2019 11:35:28 +0000	[thread overview]
Message-ID: <1548761705-10975-13-git-send-email-abel.vesa@nxp.com> (raw)
In-Reply-To: <1548761705-10975-1-git-send-email-abel.vesa@nxp.com>

There is a new step now. The need to build the u-boot.itb.
And instead of flashing the .img file, now the .itb file needs
to be flashed.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---
 board/freescale/mx6sabresd/README | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/board/freescale/mx6sabresd/README b/board/freescale/mx6sabresd/README
index 4b4df06..9b7f7cd 100644
--- a/board/freescale/mx6sabresd/README
+++ b/board/freescale/mx6sabresd/README
@@ -20,6 +20,7 @@ In order to build it:
 $ make mx6sabresd_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL and u-boot.img binaries.
 
@@ -29,7 +30,7 @@ $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
 
 - Flash the u-boot.img binary into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 && sync
 
 
 2. Booting from eMMC
@@ -38,6 +39,7 @@ $ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
 $ make mx6sabresd_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL and u-boot.img binaries.
 
@@ -54,7 +56,7 @@ Mount the eMMC in the host PC:
 - Flash SPL and u-boot.img binaries into the eMMC:
 
 $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 && sync
 
 Set SW6 to eMMC 8-bit boot: 11010110
 
@@ -64,6 +66,7 @@ Set SW6 to eMMC 8-bit boot: 11010110
 
 $ make mx6sabresd_defconfig
 $ make
+$ make u-boot.itb
 
 This will generate the SPL image called SPL and the u-boot.img.
 
@@ -73,7 +76,7 @@ $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none && sync
 
 - Flash the u-boot.img image into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 oflag=sync status=none && sync
 
 Create a partition for root file system and extract it there:
 
-- 
2.7.4

  parent reply	other threads:[~2019-01-29 11:35 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29 11:30 [U-Boot] [PATCH v2 00/22] mx6sabre: Add DM and SPL FIT support Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 01/22] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 02/22] usb: ehci-mx6: Make regulator DM_REGULATOR dependent Abel Vesa
2019-01-29 13:23   ` Peng Fan
2019-01-29 11:30 ` [U-Boot] [PATCH v2 03/22] configs: imx6sabreauto: Add DM_MMC support Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 04/22] configs: imx6sabreauto: Add DM_USB support Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 05/22] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds Abel Vesa
2019-01-29 13:29   ` Peng Fan
2019-01-30 12:15     ` Abel Vesa
2019-01-29 13:40   ` Adam Ford
2019-01-29 11:30 ` [U-Boot] [PATCH v2 06/22] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL Abel Vesa
2019-01-29 13:30   ` Peng Fan
2019-01-29 11:30 ` [U-Boot] [PATCH v2 07/22] board: mx6sabreauto: " Abel Vesa
2019-01-29 13:30   ` Peng Fan
2019-01-29 11:30 ` [U-Boot] [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files Abel Vesa
2019-01-29 13:33   ` Peng Fan
2019-01-30  8:22     ` Abel Vesa
2019-01-29 17:03   ` Tom Rini
2019-01-30 11:15     ` Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 09/22] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] Abel Vesa
2019-01-29 13:34   ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 10/22] arm: imx: Add FIT SPL its Abel Vesa
2019-01-29 11:35   ` [U-Boot] [PATCH v2 11/22] configs: mx6sabreauto: Add SPL FIT and DM support Abel Vesa
2019-01-29 13:38     ` Peng Fan
2019-01-29 11:35   ` [U-Boot] [PATCH v2 12/22] configs: mx6sabresd: " Abel Vesa
2019-01-29 13:39     ` Peng Fan
2019-01-29 11:35   ` [U-Boot] [PATCH v2 13/22] mx6sabreauto: Add DM_GPIO support Abel Vesa
2019-01-29 13:40     ` Peng Fan
2019-01-29 11:35   ` [U-Boot] [PATCH v2 14/22] mx6sabresd: " Abel Vesa
2019-01-29 13:40     ` Peng Fan
2019-01-29 11:35   ` [U-Boot] [PATCH v2 15/22] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs Abel Vesa
2019-01-29 13:41     ` Peng Fan
2019-01-29 11:35   ` [U-Boot] [PATCH v2 16/22] configs: mx6sabresd: " Abel Vesa
2019-01-29 13:41     ` Peng Fan
2019-01-29 11:35   ` [U-Boot] [PATCH v2 17/22] board: mx6sabreauto: Remove the non-DM code Abel Vesa
2019-01-29 13:43     ` Peng Fan
2019-01-30  8:19       ` Abel Vesa
2019-01-29 11:35   ` [U-Boot] [PATCH v2 18/22] board: mx6sabresd: Remove " Abel Vesa
2019-01-29 11:35   ` [U-Boot] [PATCH v2 19/22] board: mx6sabresd: Remove the enet reset gpio handling Abel Vesa
2019-01-29 11:35   ` [U-Boot] [PATCH v2 20/22] configs: mx6sabresd: Reduce size for SPL by disabling SPL_DOS and SPL_EFI Abel Vesa
2019-01-29 11:35   ` [U-Boot] [PATCH v2 21/22] board: mx6sabreauto: Update README with the SPL DM FIT info Abel Vesa
2019-01-29 11:35   ` Abel Vesa [this message]
2019-01-29 13:37   ` [U-Boot] [PATCH v2 10/22] arm: imx: Add FIT SPL its Peng Fan
2019-01-29 14:04     ` Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1548761705-10975-13-git-send-email-abel.vesa@nxp.com \
    --to=abel.vesa@nxp.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.