* v5.0-rc2 and NVMeOF
@ 2019-01-15 19:07 Bart Van Assche
2019-01-17 1:16 ` Sagi Grimberg
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-01-15 19:07 UTC (permalink / raw)
Hello,
With Linus' kernel v5.0-rc2 the blktests nvmeof-mp tests trigger the
complaint shown below. Is this a known issue?
Thanks,
Bart.
==================================================================
nvmet_rdma:__nvmet_rdma_queue_disconnect: nvmet_rdma: cm_id= 0000000090ef5516 queue->state= 1
BUG: KASAN: use-after-free in srcu_invoke_callbacks+0x209/0x290
Read of size 8 at addr ffff88810eb9f6f0 by task kworker/4:22/17434
CPU: 4 PID: 17434 Comm: kworker/4:22 Not tainted 5.0.0-rc2-dbg+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Workqueue: rcu_gp srcu_invoke_callbacks
Call Trace:
dump_stack+0x86/0xca
print_address_description+0x71/0x239
? srcu_invoke_callbacks+0x209/0x290
kasan_report.cold.3+0x1b/0x3e
? srcu_invoke_callbacks+0x209/0x290
__asan_load8+0x54/0x90
srcu_invoke_callbacks+0x209/0x290
? check_init_srcu_struct.part.8+0x60/0x60
process_one_work+0x4f4/0xa30
? pwq_dec_nr_in_flight+0x130/0x130
worker_thread+0x67/0x5b0
kthread+0x1cf/0x1f0
? process_one_work+0xa30/0xa30
? kthread_create_on_node+0xa0/0xa0
ret_from_fork+0x24/0x30
Allocated by task 55:
save_stack+0x43/0xd0
__kasan_kmalloc.constprop.9+0xd0/0xe0
kasan_kmalloc+0xe/0x10
kmem_cache_alloc_trace+0x14c/0x340
nvme_validate_ns+0xada/0x1170
nvme_scan_work+0x299/0x4c8
process_one_work+0x4f4/0xa30
worker_thread+0x67/0x5b0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
Freed by task 3432:
save_stack+0x43/0xd0
__kasan_slab_free+0x13e/0x190
kasan_slab_free+0x13/0x20
kfree+0x103/0x320
nvme_free_ns+0x198/0x1a0
nvme_ns_remove+0x1c5/0x240
nvme_remove_namespaces+0x1b3/0x210
nvme_delete_ctrl_work+0x7d/0xe0
process_one_work+0x4f4/0xa30
worker_thread+0x367/0x5b0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
nvmet_rdma:nvmet_rdma_free_queue: nvmet_rdma: freeing queue 3
The buggy address belongs to the object at ffff88810eb9f500
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 496 bytes inside of
1024-byte region [ffff88810eb9f500, ffff88810eb9f900)
nvmet_rdma:nvmet_rdma_cm_handler: nvmet_rdma: disconnected (10): status 0 id 00000000bbf5c2b8
The buggy address belongs to the page:
page:ffffea00043ae600 count:1 mapcount:0 mapping:ffff88811b002a00 index:0xffff88810eb9f500 compound_mapcount: 0
nvmet_rdma:__nvmet_rdma_queue_disconnect: nvmet_rdma: cm_id= 00000000bbf5c2b8 queue->state= 1
flags: 0x2fff000000010200(slab|head)
nvmet_rdma:nvmet_rdma_free_queue: nvmet_rdma: freeing queue 4
raw: 2fff000000010200 ffffea000454d000 0000000300000003 ffff88811b002a00
nvmet_rdma:nvmet_rdma_cm_handler: nvmet_rdma: disconnected (10): status 0 id 000000008a4de807
raw: ffff88810eb9f500 00000000801c0013 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88810eb9f580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88810eb9f600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88810eb9f680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88810eb9f700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88810eb9f780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-01-15 19:07 v5.0-rc2 and NVMeOF Bart Van Assche
@ 2019-01-17 1:16 ` Sagi Grimberg
2019-02-11 17:24 ` Bart Van Assche
0 siblings, 1 reply; 35+ messages in thread
From: Sagi Grimberg @ 2019-01-17 1:16 UTC (permalink / raw)
On 1/15/19 11:07 AM, Bart Van Assche wrote:
> Hello,
>
> With Linus' kernel v5.0-rc2 the blktests nvmeof-mp tests trigger the
> complaint shown below. Is this a known issue?
Seems like ns remove is racing with ns revalidate again..
Wasn't this related to: eb4c2382272a ("srcu: Lock srcu_data structure in
srcu_gp_start()") ?
>
> Thanks,
>
> Bart.
>
> ==================================================================
> nvmet_rdma:__nvmet_rdma_queue_disconnect: nvmet_rdma: cm_id= 0000000090ef5516 queue->state= 1
> BUG: KASAN: use-after-free in srcu_invoke_callbacks+0x209/0x290
> Read of size 8 at addr ffff88810eb9f6f0 by task kworker/4:22/17434
>
> CPU: 4 PID: 17434 Comm: kworker/4:22 Not tainted 5.0.0-rc2-dbg+ #5
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> Workqueue: rcu_gp srcu_invoke_callbacks
> Call Trace:
> dump_stack+0x86/0xca
> print_address_description+0x71/0x239
> ? srcu_invoke_callbacks+0x209/0x290
> kasan_report.cold.3+0x1b/0x3e
> ? srcu_invoke_callbacks+0x209/0x290
> __asan_load8+0x54/0x90
> srcu_invoke_callbacks+0x209/0x290
> ? check_init_srcu_struct.part.8+0x60/0x60
> process_one_work+0x4f4/0xa30
> ? pwq_dec_nr_in_flight+0x130/0x130
> worker_thread+0x67/0x5b0
> kthread+0x1cf/0x1f0
> ? process_one_work+0xa30/0xa30
> ? kthread_create_on_node+0xa0/0xa0
> ret_from_fork+0x24/0x30
>
> Allocated by task 55:
> save_stack+0x43/0xd0
> __kasan_kmalloc.constprop.9+0xd0/0xe0
> kasan_kmalloc+0xe/0x10
> kmem_cache_alloc_trace+0x14c/0x340
> nvme_validate_ns+0xada/0x1170
> nvme_scan_work+0x299/0x4c8
> process_one_work+0x4f4/0xa30
> worker_thread+0x67/0x5b0
> kthread+0x1cf/0x1f0
> ret_from_fork+0x24/0x30
>
> Freed by task 3432:
> save_stack+0x43/0xd0
> __kasan_slab_free+0x13e/0x190
> kasan_slab_free+0x13/0x20
> kfree+0x103/0x320
> nvme_free_ns+0x198/0x1a0
> nvme_ns_remove+0x1c5/0x240
> nvme_remove_namespaces+0x1b3/0x210
> nvme_delete_ctrl_work+0x7d/0xe0
> process_one_work+0x4f4/0xa30
> worker_thread+0x367/0x5b0
> kthread+0x1cf/0x1f0
> ret_from_fork+0x24/0x30
>
> nvmet_rdma:nvmet_rdma_free_queue: nvmet_rdma: freeing queue 3
> The buggy address belongs to the object at ffff88810eb9f500
> which belongs to the cache kmalloc-1k of size 1024
> The buggy address is located 496 bytes inside of
> 1024-byte region [ffff88810eb9f500, ffff88810eb9f900)
> nvmet_rdma:nvmet_rdma_cm_handler: nvmet_rdma: disconnected (10): status 0 id 00000000bbf5c2b8
> The buggy address belongs to the page:
> page:ffffea00043ae600 count:1 mapcount:0 mapping:ffff88811b002a00 index:0xffff88810eb9f500 compound_mapcount: 0
> nvmet_rdma:__nvmet_rdma_queue_disconnect: nvmet_rdma: cm_id= 00000000bbf5c2b8 queue->state= 1
> flags: 0x2fff000000010200(slab|head)
> nvmet_rdma:nvmet_rdma_free_queue: nvmet_rdma: freeing queue 4
> raw: 2fff000000010200 ffffea000454d000 0000000300000003 ffff88811b002a00
> nvmet_rdma:nvmet_rdma_cm_handler: nvmet_rdma: disconnected (10): status 0 id 000000008a4de807
> raw: ffff88810eb9f500 00000000801c0013 00000001ffffffff 0000000000000000
> page dumped because: kasan: bad access detected
>
> Memory state around the buggy address:
> ffff88810eb9f580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff88810eb9f600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> ffff88810eb9f680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ^
> ffff88810eb9f700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff88810eb9f780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ==================================================================
>
> _______________________________________________
> Linux-nvme mailing list
> Linux-nvme at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-nvme
>
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-01-17 1:16 ` Sagi Grimberg
@ 2019-02-11 17:24 ` Bart Van Assche
2019-02-11 21:08 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-11 17:24 UTC (permalink / raw)
On Wed, 2019-01-16@17:16 -0800, Sagi Grimberg wrote:
> On 1/15/19 11:07 AM, Bart Van Assche wrote:
> > Hello,
> >
> > With Linus' kernel v5.0-rc2 the blktests nvmeof-mp tests trigger the
> > complaint shown below. Is this a known issue?
>
> Seems like ns remove is racing with ns revalidate again..
>
> Wasn't this related to: eb4c2382272a ("srcu: Lock srcu_data structure in
> srcu_gp_start()") ?
(+Paul)
I'm not sure. Paul, are you perhaps aware of any open issues in the RCU
infrastructure? If I run the following test:
git clone https://github.com/osandov/blktests.git
cd blktests
./check -q nvmeof-mp
then the following appears on the console:
BUG: KASAN: use-after-free in srcu_invoke_callbacks+0x209/0x290
Read of size 8 at addr ffff8881126b6df0 by task kworker/2:94/26747
CPU: 2 PID: 26747 Comm: kworker/2:94 Not tainted 5.0.0-rc5-dbg+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Workqueue: rcu_gp srcu_invoke_callbacks
Call Trace:
dump_stack+0x86/0xca
print_address_description+0x71/0x239
kasan_report.cold.3+0x1b/0x3e
__asan_load8+0x54/0x90
srcu_invoke_callbacks+0x209/0x290
process_one_work+0x4f1/0xa40
worker_thread+0x67/0x5b0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
Allocated by task 955:
save_stack+0x43/0xd0
__kasan_kmalloc.constprop.9+0xcb/0xd0
kasan_kmalloc+0x9/0x10
kmem_cache_alloc_trace+0x14c/0x340
nvme_validate_ns+0xada/0x1170
nvme_scan_work+0x299/0x4c8
process_one_work+0x4f1/0xa40
worker_thread+0x67/0x5b0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
Freed by task 55:
save_stack+0x43/0xd0
__kasan_slab_free+0x139/0x190
kasan_slab_free+0xe/0x10
kfree+0x103/0x320
nvme_free_ns+0x198/0x1a0
nvme_ns_remove+0x1c5/0x240
nvme_remove_namespaces+0x1b3/0x210
nvme_delete_ctrl_work+0x7d/0xe0
process_one_work+0x4f1/0xa40
worker_thread+0x367/0x5b0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
The buggy address belongs to the object at ffff8881126b6c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 496 bytes inside of
1024-byte region [ffff8881126b6c00, ffff8881126b7000)
The buggy address belongs to the page:
page:ffffea000449ac00 count:1 mapcount:0 mapping:ffff88811b002a00 index:0xffff8881126b1f80 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw: 2fff000000010200 ffffea00042bcc08 ffffea000457b808 ffff88811b002a00
raw: ffff8881126b1f80 00000000001c0011 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881126b6c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881126b6d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881126b6d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881126b6e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881126b6e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-11 17:24 ` Bart Van Assche
@ 2019-02-11 21:08 ` Paul E. McKenney
2019-02-11 22:27 ` Bart Van Assche
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-11 21:08 UTC (permalink / raw)
On Mon, Feb 11, 2019@09:24:51AM -0800, Bart Van Assche wrote:
> On Wed, 2019-01-16@17:16 -0800, Sagi Grimberg wrote:
> > On 1/15/19 11:07 AM, Bart Van Assche wrote:
> > > Hello,
> > >
> > > With Linus' kernel v5.0-rc2 the blktests nvmeof-mp tests trigger the
> > > complaint shown below. Is this a known issue?
> >
> > Seems like ns remove is racing with ns revalidate again..
> >
> > Wasn't this related to: eb4c2382272a ("srcu: Lock srcu_data structure in
> > srcu_gp_start()") ?
>
> (+Paul)
>
> I'm not sure. Paul, are you perhaps aware of any open issues in the RCU
> infrastructure? If I run the following test:
The last one I knew of is present in v5.0-rc1 eb4c2382272a ("srcu:
Lock srcu_data structure in srcu_gp_start()").
> git clone https://github.com/osandov/blktests.git
> cd blktests
> ./check -q nvmeof-mp
>
> then the following appears on the console:
>
> BUG: KASAN: use-after-free in srcu_invoke_callbacks+0x209/0x290
> Read of size 8 at addr ffff8881126b6df0 by task kworker/2:94/26747
> CPU: 2 PID: 26747 Comm: kworker/2:94 Not tainted 5.0.0-rc5-dbg+ #5
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> Workqueue: rcu_gp srcu_invoke_callbacks
> Call Trace:
> dump_stack+0x86/0xca
> print_address_description+0x71/0x239
> kasan_report.cold.3+0x1b/0x3e
> __asan_load8+0x54/0x90
> srcu_invoke_callbacks+0x209/0x290
> process_one_work+0x4f1/0xa40
> worker_thread+0x67/0x5b0
> kthread+0x1cf/0x1f0
> ret_from_fork+0x24/0x30
The usual way that something like this happens is by invoking call_srcu()
twice in a row on the same object, similar to double-kfree() but with
call_srcu() instead of kfree(). One way to check for this sort of thing
is to reproduce in a kernel built with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y.
Thanx, Paul
> Allocated by task 955:
> save_stack+0x43/0xd0
> __kasan_kmalloc.constprop.9+0xcb/0xd0
> kasan_kmalloc+0x9/0x10
> kmem_cache_alloc_trace+0x14c/0x340
> nvme_validate_ns+0xada/0x1170
> nvme_scan_work+0x299/0x4c8
> process_one_work+0x4f1/0xa40
> worker_thread+0x67/0x5b0
> kthread+0x1cf/0x1f0
> ret_from_fork+0x24/0x30
>
> Freed by task 55:
> save_stack+0x43/0xd0
> __kasan_slab_free+0x139/0x190
> kasan_slab_free+0xe/0x10
> kfree+0x103/0x320
> nvme_free_ns+0x198/0x1a0
> nvme_ns_remove+0x1c5/0x240
> nvme_remove_namespaces+0x1b3/0x210
> nvme_delete_ctrl_work+0x7d/0xe0
> process_one_work+0x4f1/0xa40
> worker_thread+0x367/0x5b0
> kthread+0x1cf/0x1f0
> ret_from_fork+0x24/0x30
>
> The buggy address belongs to the object at ffff8881126b6c00
> which belongs to the cache kmalloc-1k of size 1024
> The buggy address is located 496 bytes inside of
> 1024-byte region [ffff8881126b6c00, ffff8881126b7000)
> The buggy address belongs to the page:
> page:ffffea000449ac00 count:1 mapcount:0 mapping:ffff88811b002a00 index:0xffff8881126b1f80 compound_mapcount: 0
> flags: 0x2fff000000010200(slab|head)
> raw: 2fff000000010200 ffffea00042bcc08 ffffea000457b808 ffff88811b002a00
> raw: ffff8881126b1f80 00000000001c0011 00000001ffffffff 0000000000000000
> page dumped because: kasan: bad access detected
>
> Memory state around the buggy address:
> ffff8881126b6c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8881126b6d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> >ffff8881126b6d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ^
> ffff8881126b6e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8881126b6e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-11 21:08 ` Paul E. McKenney
@ 2019-02-11 22:27 ` Bart Van Assche
2019-02-12 1:24 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-11 22:27 UTC (permalink / raw)
On Mon, 2019-02-11@13:08 -0800, Paul E. McKenney wrote:
> On Mon, Feb 11, 2019@09:24:51AM -0800, Bart Van Assche wrote:
> > BUG: KASAN: use-after-free in srcu_invoke_callbacks+0x209/0x290
> > Read of size 8 at addr ffff8881126b6df0 by task kworker/2:94/26747
> > CPU: 2 PID: 26747 Comm: kworker/2:94 Not tainted 5.0.0-rc5-dbg+ #5
> > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> > Workqueue: rcu_gp srcu_invoke_callbacks
> > Call Trace:
> > dump_stack+0x86/0xca
> > print_address_description+0x71/0x239
> > kasan_report.cold.3+0x1b/0x3e
> > __asan_load8+0x54/0x90
> > srcu_invoke_callbacks+0x209/0x290
> > process_one_work+0x4f1/0xa40
> > worker_thread+0x67/0x5b0
> > kthread+0x1cf/0x1f0
> > ret_from_fork+0x24/0x30
>
> The usual way that something like this happens is by invoking call_srcu()
> twice in a row on the same object, similar to double-kfree() but with
> call_srcu() instead of kfree(). One way to check for this sort of thing
> is to reproduce in a kernel built with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y.
Thanks Paul for the feedback. You may want to know that this test was run
against kernel v5.0-rc5 and that that debugging option was enabled in the
kernel config before I ran this test:
$ grep RCU_HEAD .config
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
Bart.
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-11 22:27 ` Bart Van Assche
@ 2019-02-12 1:24 ` Paul E. McKenney
2019-02-12 16:47 ` Bart Van Assche
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-12 1:24 UTC (permalink / raw)
On Mon, Feb 11, 2019@02:27:19PM -0800, Bart Van Assche wrote:
> On Mon, 2019-02-11@13:08 -0800, Paul E. McKenney wrote:
> > On Mon, Feb 11, 2019@09:24:51AM -0800, Bart Van Assche wrote:
> > > BUG: KASAN: use-after-free in srcu_invoke_callbacks+0x209/0x290
> > > Read of size 8 at addr ffff8881126b6df0 by task kworker/2:94/26747
> > > CPU: 2 PID: 26747 Comm: kworker/2:94 Not tainted 5.0.0-rc5-dbg+ #5
> > > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> > > Workqueue: rcu_gp srcu_invoke_callbacks
> > > Call Trace:
> > > dump_stack+0x86/0xca
> > > print_address_description+0x71/0x239
> > > kasan_report.cold.3+0x1b/0x3e
> > > __asan_load8+0x54/0x90
> > > srcu_invoke_callbacks+0x209/0x290
> > > process_one_work+0x4f1/0xa40
> > > worker_thread+0x67/0x5b0
> > > kthread+0x1cf/0x1f0
> > > ret_from_fork+0x24/0x30
> >
> > The usual way that something like this happens is by invoking call_srcu()
> > twice in a row on the same object, similar to double-kfree() but with
> > call_srcu() instead of kfree(). One way to check for this sort of thing
> > is to reproduce in a kernel built with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y.
>
> Thanks Paul for the feedback. You may want to know that this test was run
> against kernel v5.0-rc5 and that that debugging option was enabled in the
> kernel config before I ran this test:
>
> $ grep RCU_HEAD .config
> CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
I guess you beat me to it, then. ;-)
Could you please send me the usual, including your .config and any details
about what the workload was? Was this during runtime or at boot time?
If at boot time, could you please also send along the dmesg?
Finally, would you be able to translate the functions/offsets above
to v5.0-rc5 source line numbers? Or, failing that, could you please
provide me a disassembly of srcu_invoke_callbacks()?
And just to double-check, CONFIG_DEBUG_OBJECTS_RCU_HEAD=y was set in
the KASAN run itself? The "was enabled in the kernel config before I
ran this test" could be interpreted in several ways, and I just need to
make sure I understand what really happened. ;-)
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-12 1:24 ` Paul E. McKenney
@ 2019-02-12 16:47 ` Bart Van Assche
2019-02-12 17:47 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-12 16:47 UTC (permalink / raw)
On Mon, 2019-02-11@17:24 -0800, Paul E. McKenney wrote:
> On Mon, Feb 11, 2019@02:27:19PM -0800, Bart Van Assche wrote:
> > On Mon, 2019-02-11@13:08 -0800, Paul E. McKenney wrote:
> > > On Mon, Feb 11, 2019@09:24:51AM -0800, Bart Van Assche wrote:
> > > > BUG: KASAN: use-after-free in srcu_invoke_callbacks+0x209/0x290
> > > > Read of size 8 at addr ffff8881126b6df0 by task kworker/2:94/26747
> > > > CPU: 2 PID: 26747 Comm: kworker/2:94 Not tainted 5.0.0-rc5-dbg+ #5
> > > > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> > > > Workqueue: rcu_gp srcu_invoke_callbacks
> > > > Call Trace:
> > > > dump_stack+0x86/0xca
> > > > print_address_description+0x71/0x239
> > > > kasan_report.cold.3+0x1b/0x3e
> > > > __asan_load8+0x54/0x90
> > > > srcu_invoke_callbacks+0x209/0x290
> > > > process_one_work+0x4f1/0xa40
> > > > worker_thread+0x67/0x5b0
> > > > kthread+0x1cf/0x1f0
> > > > ret_from_fork+0x24/0x30
> > >
> > > The usual way that something like this happens is by invoking call_srcu()
> > > twice in a row on the same object, similar to double-kfree() but with
> > > call_srcu() instead of kfree(). One way to check for this sort of thing
> > > is to reproduce in a kernel built with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y.
> >
> > Thanks Paul for the feedback. You may want to know that this test was run
> > against kernel v5.0-rc5 and that that debugging option was enabled in the
> > kernel config before I ran this test:
> >
> > $ grep RCU_HEAD .config
> > CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
>
> I guess you beat me to it, then. ;-)
>
> Could you please send me the usual, including your .config and any details
> about what the workload was? Was this during runtime or at boot time?
> If at boot time, could you please also send along the dmesg?
>
> Finally, would you be able to translate the functions/offsets above
> to v5.0-rc5 source line numbers? Or, failing that, could you please
> provide me a disassembly of srcu_invoke_callbacks()?
>
> And just to double-check, CONFIG_DEBUG_OBJECTS_RCU_HEAD=y was set in
> the KASAN run itself? The "was enabled in the kernel config before I
> ran this test" could be interpreted in several ways, and I just need to
> make sure I understand what really happened. ;-)
Hi Paul,
Please find the kernel config I used for this test attached to this e-mail.
I enabled CONFIG_DEBUG_OBJECTS_RCU_HEAD=y in August 2018 in the kernel
config of the VM that I use to run this test. That option has been left
enabled since then every time I upgraded and rebuilt the kernel.
The call trace was reported while running the following shell code:
git clone https://github.com/bvanassche/blktests
cd blktests
sudo ./check -q nvmeof-mp
Gdb translates the address inside srcu_invoke_callbacks() from the call trace
as follows:
(gdb) list *(srcu_invoke_callbacks+0x209)
0xffffffff81181b79 is in srcu_invoke_callbacks (./include/linux/compiler.h:193).
188 })
189
190 static __always_inline
191 void __read_once_size(const volatile void *p, void *res, int size)
192 {
193 __READ_ONCE_SIZE;
194 }
195
196 #ifdef CONFIG_KASAN
197 /*
(gdb) list *(srcu_invoke_callbacks+0x1fc)
0xffffffff81181b6c is in srcu_invoke_callbacks (kernel/rcu/srcutree.c:1218).
1213 /*
1214 * Update counts, accelerate new callbacks, and if needed,
1215 * schedule another round of callback invocation.
1216 */
1217 spin_lock_irq_rcu_node(sdp);
1218 rcu_segcblist_insert_count(&sdp->srcu_cblist, &ready_cbs);
1219 (void)rcu_segcblist_accelerate(&sdp->srcu_cblist,
1220 rcu_seq_snap(&ssp->srcu_gp_seq));
1221 sdp->srcu_cblist_invoking = false;
1222 more = rcu_segcblist_ready_cbs(&sdp->srcu_cblist);
Please let me know if you need more information.
Bart.
-------------- next part --------------
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.0.0-rc5 Kernel Configuration
#
#
# Compiler: gcc (Ubuntu 8.2.0-7ubuntu1) 8.2.0
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=80200
CONFIG_CLANG_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="-dbg"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_RETPOLINE is not set
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_UV is not set
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=16
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
# CONFIG_PERF_EVENTS_AMD_POWER is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=1
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_INTEL_UMIP=y
CONFIG_X86_INTEL_MPX=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KEXEC_VERIFY_SIG=y
CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
# CONFIG_CRASH_DUMP is not set
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_EMULATE is not set
CONFIG_LEGACY_VSYSCALL_NONE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_DEBUGGER=y
CONFIG_ACPI_DEBUGGER_USER=y
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_TPS68470_PMIC_OPREGION=y
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_X86_SYSFB=y
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_X86_X32=y
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_HAVE_GENERIC_GUP=y
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
# CONFIG_EFI_VARS_PSTORE is not set
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
CONFIG_RESET_ATTACK_MITIGATION=y
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_DEV_PATH_PARSER=y
#
# Tegra firmware driver
#
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
CONFIG_MODULE_SIG_SHA512=y
CONFIG_MODULE_SIG_HASH="sha512"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_CMDLINE_PARSER=y
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=m
CONFIG_MQ_IOSCHED_KYBER=m
CONFIG_IOSCHED_BFQ=m
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_ZONE_DEVICE=y
CONFIG_ZONE_DEVICE=y
CONFIG_ARCH_HAS_HMM=y
CONFIG_MIGRATE_VMA_HELPER=y
CONFIG_DEV_PAGEMAP_OPS=y
CONFIG_HMM=y
CONFIG_HMM_MIRROR=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_DEVICE_PUBLIC=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_NET=y
CONFIG_NET_INGRESS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
# CONFIG_SMC is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_LOG_NETDEV is not set
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
CONFIG_BPFILTER=y
CONFIG_BPFILTER_UMH=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_FAILOVER=m
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_P2PDMA=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
#
# Cadence PCIe controllers support
#
# CONFIG_VMD is not set
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCIE_DW_PLAT_EP is not set
# CONFIG_PCI_MESON is not set
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
# CONFIG_PCI_EPF_TEST is not set
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
CONFIG_BLK_DEV_FD=m
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=m
CONFIG_VIRTIO_BLK_SCSI=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
# CONFIG_NVME_MULTIPATH is not set
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_RDMA=m
# CONFIG_NVME_TARGET_FC is not set
# CONFIG_NVME_TARGET_TCP is not set
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_PVPANIC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
#
# Intel MIC & related support
#
#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set
#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set
#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_DM_ZONED is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_MDIO_DEVICE is not set
# CONFIG_PHYLIB is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K_PCI=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_HYSDN is not set
# CONFIG_MISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
# CONFIG_TOUCHSCREEN_DA9052 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=y
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM831X is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MAX8925_ONKEY is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA9052_ONKEY is not set
# CONFIG_INPUT_DA9055_ONKEY is not set
# CONFIG_INPUT_DA9063_ONKEY is not set
# CONFIG_INPUT_WM831X_ON is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
# CONFIG_SERIAL_8250_MOXA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_CPU is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_CHT_WC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_BROXTON is not set
CONFIG_PINCTRL_CANNONLAKE=y
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=y
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VX855 is not set
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_CRYSTAL_COVE is not set
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_DA9055 is not set
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_TPS68470=y
# CONFIG_GPIO_TWL4030 is not set
# CONFIG_GPIO_TWL6040 is not set
# CONFIG_GPIO_WM831X is not set
# CONFIG_GPIO_WM8350 is not set
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
#
# USB GPIO expanders
#
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LTC3651 is not set
# CONFIG_CHARGER_MAX14577 is not set
# CONFIG_CHARGER_MAX77693 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_THERMAL_EMULATION=y
#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_X86_PKG_TEMP_THERMAL is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_MADERA is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
# CONFIG_MFD_DA9062 is not set
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
CONFIG_INTEL_SOC_PMIC=y
CONFIG_INTEL_SOC_PMIC_CHTWC=y
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
# CONFIG_AB3100_OTP is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
CONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS68470=y
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
# CONFIG_RAVE_SP_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
#
# ACP (Audio CoProcessor) Configuration
#
#
# AMD Library routines
#
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SM712 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PCI is not set
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_QIB is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_USNIC is not set
# CONFIG_INFINIBAND_BNXT_RE is not set
# CONFIG_INFINIBAND_HFI1 is not set
CONFIG_INFINIBAND_RDMAVT=m
CONFIG_RDMA_RXE=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_INFINIBAND_ISERT is not set
# CONFIG_INFINIBAND_OPA_VNIC is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_UDMABUF is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
# CONFIG_VBOXGUEST is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ACERHDF is not set
# CONFIG_DCDBAS is not set
# CONFIG_DELL_SMBIOS is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
# CONFIG_DELL_RBU is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
CONFIG_INTEL_PMC_CORE=y
# CONFIG_IBM_RTL is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_I2C_MULTI_INSTANTIATE is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_CLK_TWL6040 is not set
# CONFIG_COMMON_CLK_PALMAS is not set
CONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
#
# Broadcom SoC drivers
#
#
# NXP/Freescale QorIQ SoC drivers
#
#
# i.MX SoC drivers
#
#
# Qualcomm SoC drivers
#
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_POWERCAP=y
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
CONFIG_RAS_CEC=y
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=y
# CONFIG_BLK_DEV_PMEM is not set
# CONFIG_ND_BLK is not set
CONFIG_ND_CLAIM=y
CONFIG_BTT=y
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX=y
# CONFIG_NVMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
# CONFIG_PAGE_TABLE_ISOLATION is not set
CONFIG_INTEL_TXT=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_FALLBACK=y
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128L is not set
# CONFIG_CRYPTO_AEGIS256 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set
# CONFIG_CRYPTO_MORUS640 is not set
# CONFIG_CRYPTO_MORUS640_SSE2 is not set
# CONFIG_CRYPTO_MORUS1280 is not set
# CONFIG_CRYPTO_MORUS1280_SSE2 is not set
# CONFIG_CRYPTO_MORUS1280_AVX2 is not set
CONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_ECHAINIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
CONFIG_CRYPTO_DEV_CCP=y
# CONFIG_CRYPTO_DEV_CCP_DD is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
# CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE is not set
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_VIRT_OPS=y
CONFIG_SWIOTLB=y
CONFIG_SGL_ALLOC=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_GDB_SCRIPTS=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1400
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
# CONFIG_KASAN_EXTRA is not set
CONFIG_KASAN_OUTLINE=y
# CONFIG_KASAN_INLINE is not set
# CONFIG_TEST_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_FUTEX is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
CONFIG_X86_PTDUMP_CORE=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_WX=y
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
# CONFIG_UNWINDER_ORC is not set
CONFIG_UNWINDER_FRAME_POINTER=y
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-12 16:47 ` Bart Van Assche
@ 2019-02-12 17:47 ` Paul E. McKenney
2019-02-12 19:15 ` Paul E. McKenney
2019-02-13 0:47 ` Bart Van Assche
0 siblings, 2 replies; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-12 17:47 UTC (permalink / raw)
On Tue, Feb 12, 2019@08:47:00AM -0800, Bart Van Assche wrote:
> On Mon, 2019-02-11@17:24 -0800, Paul E. McKenney wrote:
> > On Mon, Feb 11, 2019@02:27:19PM -0800, Bart Van Assche wrote:
> > > On Mon, 2019-02-11@13:08 -0800, Paul E. McKenney wrote:
> > > > On Mon, Feb 11, 2019@09:24:51AM -0800, Bart Van Assche wrote:
> > > > > BUG: KASAN: use-after-free in srcu_invoke_callbacks+0x209/0x290
> > > > > Read of size 8 at addr ffff8881126b6df0 by task kworker/2:94/26747
> > > > > CPU: 2 PID: 26747 Comm: kworker/2:94 Not tainted 5.0.0-rc5-dbg+ #5
> > > > > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> > > > > Workqueue: rcu_gp srcu_invoke_callbacks
> > > > > Call Trace:
> > > > > dump_stack+0x86/0xca
> > > > > print_address_description+0x71/0x239
> > > > > kasan_report.cold.3+0x1b/0x3e
> > > > > __asan_load8+0x54/0x90
> > > > > srcu_invoke_callbacks+0x209/0x290
> > > > > process_one_work+0x4f1/0xa40
> > > > > worker_thread+0x67/0x5b0
> > > > > kthread+0x1cf/0x1f0
> > > > > ret_from_fork+0x24/0x30
> > > >
> > > > The usual way that something like this happens is by invoking call_srcu()
> > > > twice in a row on the same object, similar to double-kfree() but with
> > > > call_srcu() instead of kfree(). One way to check for this sort of thing
> > > > is to reproduce in a kernel built with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y.
> > >
> > > Thanks Paul for the feedback. You may want to know that this test was run
> > > against kernel v5.0-rc5 and that that debugging option was enabled in the
> > > kernel config before I ran this test:
> > >
> > > $ grep RCU_HEAD .config
> > > CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
> >
> > I guess you beat me to it, then. ;-)
> >
> > Could you please send me the usual, including your .config and any details
> > about what the workload was? Was this during runtime or at boot time?
> > If at boot time, could you please also send along the dmesg?
> >
> > Finally, would you be able to translate the functions/offsets above
> > to v5.0-rc5 source line numbers? Or, failing that, could you please
> > provide me a disassembly of srcu_invoke_callbacks()?
> >
> > And just to double-check, CONFIG_DEBUG_OBJECTS_RCU_HEAD=y was set in
> > the KASAN run itself? The "was enabled in the kernel config before I
> > ran this test" could be interpreted in several ways, and I just need to
> > make sure I understand what really happened. ;-)
>
> Hi Paul,
>
> Please find the kernel config I used for this test attached to this e-mail.
> I enabled CONFIG_DEBUG_OBJECTS_RCU_HEAD=y in August 2018 in the kernel
> config of the VM that I use to run this test. That option has been left
> enabled since then every time I upgraded and rebuilt the kernel.
>
> The call trace was reported while running the following shell code:
>
> git clone https://github.com/bvanassche/blktests
> cd blktests
> sudo ./check -q nvmeof-mp
>
> Gdb translates the address inside srcu_invoke_callbacks() from the call trace
> as follows:
>
> (gdb) list *(srcu_invoke_callbacks+0x209)
> 0xffffffff81181b79 is in srcu_invoke_callbacks (./include/linux/compiler.h:193).
> 188 })
> 189
> 190 static __always_inline
> 191 void __read_once_size(const volatile void *p, void *res, int size)
> 192 {
> 193 __READ_ONCE_SIZE;
> 194 }
> 195
> 196 #ifdef CONFIG_KASAN
> 197 /*
> (gdb) list *(srcu_invoke_callbacks+0x1fc)
> 0xffffffff81181b6c is in srcu_invoke_callbacks (kernel/rcu/srcutree.c:1218).
> 1213 /*
> 1214 * Update counts, accelerate new callbacks, and if needed,
> 1215 * schedule another round of callback invocation.
> 1216 */
> 1217 spin_lock_irq_rcu_node(sdp);
> 1218 rcu_segcblist_insert_count(&sdp->srcu_cblist, &ready_cbs);
> 1219 (void)rcu_segcblist_accelerate(&sdp->srcu_cblist,
> 1220 rcu_seq_snap(&ssp->srcu_gp_seq));
> 1221 sdp->srcu_cblist_invoking = false;
> 1222 more = rcu_segcblist_ready_cbs(&sdp->srcu_cblist);
This is impressive. ;-)
When invoked with these arguments, rcu_segcblist_insert_count() accesses
only the specified per-CPU state protected by its lock. Which explains
why CONFIG_DEBUG_OBJECTS_RCU_HEAD=y wasn't helping at all, because it
checks for issues in the callback lists, not in on-stack or in per-CPU
structures. I believe that we can eliminate the on-stack ready_cbs
variable from consideration, which leaves the per-CPU structure that is
referenced by sdp.
> Please let me know if you need more information.
It looks to me like you need an srcu_barrier(&head->srcu) just before
the call to cleanup_srcu_struct_quiesced() in nvme_free_ns_head().
Or maybe earlier in the cleanup flow, but most definitely -after- the
last invocation of call_srcu().
Does that help? Or is there a call to srcu_barrier() somewhere that I
am blind to?
Thanx, Paul
> Bart.
> #
> # Automatically generated file; DO NOT EDIT.
> # Linux/x86 5.0.0-rc5 Kernel Configuration
> #
>
> #
> # Compiler: gcc (Ubuntu 8.2.0-7ubuntu1) 8.2.0
> #
> CONFIG_CC_IS_GCC=y
> CONFIG_GCC_VERSION=80200
> CONFIG_CLANG_VERSION=0
> CONFIG_CC_HAS_ASM_GOTO=y
> CONFIG_CONSTRUCTORS=y
> CONFIG_IRQ_WORK=y
> CONFIG_BUILDTIME_EXTABLE_SORT=y
> CONFIG_THREAD_INFO_IN_TASK=y
>
> #
> # General setup
> #
> CONFIG_INIT_ENV_ARG_LIMIT=32
> # CONFIG_COMPILE_TEST is not set
> CONFIG_LOCALVERSION="-dbg"
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_BUILD_SALT=""
> CONFIG_HAVE_KERNEL_GZIP=y
> CONFIG_HAVE_KERNEL_BZIP2=y
> CONFIG_HAVE_KERNEL_LZMA=y
> CONFIG_HAVE_KERNEL_XZ=y
> CONFIG_HAVE_KERNEL_LZO=y
> CONFIG_HAVE_KERNEL_LZ4=y
> CONFIG_KERNEL_GZIP=y
> # CONFIG_KERNEL_BZIP2 is not set
> # CONFIG_KERNEL_LZMA is not set
> # CONFIG_KERNEL_XZ is not set
> # CONFIG_KERNEL_LZO is not set
> # CONFIG_KERNEL_LZ4 is not set
> CONFIG_DEFAULT_HOSTNAME="(none)"
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_POSIX_MQUEUE_SYSCTL=y
> CONFIG_CROSS_MEMORY_ATTACH=y
> # CONFIG_USELIB is not set
> CONFIG_AUDIT=y
> CONFIG_HAVE_ARCH_AUDITSYSCALL=y
> CONFIG_AUDITSYSCALL=y
>
> #
> # IRQ subsystem
> #
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_IRQ_SHOW=y
> CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_GENERIC_IRQ_MIGRATION=y
> CONFIG_IRQ_DOMAIN=y
> CONFIG_IRQ_DOMAIN_HIERARCHY=y
> CONFIG_GENERIC_MSI_IRQ=y
> CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
> CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
> CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
> CONFIG_IRQ_FORCED_THREADING=y
> CONFIG_SPARSE_IRQ=y
> # CONFIG_GENERIC_IRQ_DEBUGFS is not set
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_ARCH_CLOCKSOURCE_DATA=y
> CONFIG_ARCH_CLOCKSOURCE_INIT=y
> CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
> CONFIG_GENERIC_TIME_VSYSCALL=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
> CONFIG_GENERIC_CMOS_UPDATE=y
>
> #
> # Timers subsystem
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ_COMMON=y
> # CONFIG_HZ_PERIODIC is not set
> CONFIG_NO_HZ_IDLE=y
> # CONFIG_NO_HZ_FULL is not set
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> CONFIG_PREEMPT_COUNT=y
>
> #
> # CPU/Task time and stats accounting
> #
> CONFIG_TICK_CPU_ACCOUNTING=y
> # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
> # CONFIG_IRQ_TIME_ACCOUNTING is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_TASK_XACCT=y
> CONFIG_TASK_IO_ACCOUNTING=y
> # CONFIG_PSI is not set
> CONFIG_CPU_ISOLATION=y
>
> #
> # RCU Subsystem
> #
> CONFIG_PREEMPT_RCU=y
> # CONFIG_RCU_EXPERT is not set
> CONFIG_SRCU=y
> CONFIG_TREE_SRCU=y
> CONFIG_TASKS_RCU=y
> CONFIG_RCU_STALL_COMMON=y
> CONFIG_RCU_NEED_SEGCBLIST=y
> CONFIG_BUILD_BIN2C=y
> CONFIG_IKCONFIG=m
> # CONFIG_IKCONFIG_PROC is not set
> CONFIG_LOG_BUF_SHIFT=18
> CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
> CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
> CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
> CONFIG_ARCH_SUPPORTS_INT128=y
> CONFIG_NUMA_BALANCING=y
> CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
> CONFIG_CGROUPS=y
> CONFIG_PAGE_COUNTER=y
> CONFIG_MEMCG=y
> CONFIG_MEMCG_SWAP=y
> # CONFIG_MEMCG_SWAP_ENABLED is not set
> CONFIG_MEMCG_KMEM=y
> CONFIG_BLK_CGROUP=y
> # CONFIG_DEBUG_BLK_CGROUP is not set
> CONFIG_CGROUP_WRITEBACK=y
> CONFIG_CGROUP_SCHED=y
> CONFIG_FAIR_GROUP_SCHED=y
> CONFIG_CFS_BANDWIDTH=y
> # CONFIG_RT_GROUP_SCHED is not set
> CONFIG_CGROUP_PIDS=y
> CONFIG_CGROUP_RDMA=y
> CONFIG_CGROUP_FREEZER=y
> CONFIG_CGROUP_HUGETLB=y
> CONFIG_CPUSETS=y
> CONFIG_PROC_PID_CPUSET=y
> CONFIG_CGROUP_DEVICE=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_CGROUP_PERF=y
> CONFIG_CGROUP_BPF=y
> # CONFIG_CGROUP_DEBUG is not set
> CONFIG_SOCK_CGROUP_DATA=y
> CONFIG_NAMESPACES=y
> CONFIG_UTS_NS=y
> CONFIG_IPC_NS=y
> CONFIG_USER_NS=y
> CONFIG_PID_NS=y
> CONFIG_NET_NS=y
> CONFIG_CHECKPOINT_RESTORE=y
> CONFIG_SCHED_AUTOGROUP=y
> # CONFIG_SYSFS_DEPRECATED is not set
> CONFIG_RELAY=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_RD_GZIP=y
> CONFIG_RD_BZIP2=y
> CONFIG_RD_LZMA=y
> CONFIG_RD_XZ=y
> CONFIG_RD_LZO=y
> CONFIG_RD_LZ4=y
> CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> CONFIG_SYSCTL=y
> CONFIG_ANON_INODES=y
> CONFIG_HAVE_UID16=y
> CONFIG_SYSCTL_EXCEPTION_TRACE=y
> CONFIG_HAVE_PCSPKR_PLATFORM=y
> CONFIG_BPF=y
> # CONFIG_EXPERT is not set
> CONFIG_UID16=y
> CONFIG_MULTIUSER=y
> CONFIG_SGETMASK_SYSCALL=y
> CONFIG_SYSFS_SYSCALL=y
> CONFIG_FHANDLE=y
> CONFIG_POSIX_TIMERS=y
> CONFIG_PRINTK=y
> CONFIG_PRINTK_NMI=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_FUTEX_PI=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> CONFIG_ADVISE_SYSCALLS=y
> CONFIG_MEMBARRIER=y
> CONFIG_KALLSYMS=y
> CONFIG_KALLSYMS_ALL=y
> CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
> CONFIG_KALLSYMS_BASE_RELATIVE=y
> CONFIG_BPF_SYSCALL=y
> CONFIG_BPF_JIT_ALWAYS_ON=y
> CONFIG_USERFAULTFD=y
> CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
> CONFIG_RSEQ=y
> # CONFIG_EMBEDDED is not set
> CONFIG_HAVE_PERF_EVENTS=y
>
> #
> # Kernel Performance Events And Counters
> #
> CONFIG_PERF_EVENTS=y
> # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_SLUB_DEBUG=y
> # CONFIG_COMPAT_BRK is not set
> # CONFIG_SLAB is not set
> CONFIG_SLUB=y
> CONFIG_SLAB_MERGE_DEFAULT=y
> CONFIG_SLAB_FREELIST_RANDOM=y
> CONFIG_SLAB_FREELIST_HARDENED=y
> CONFIG_SLUB_CPU_PARTIAL=y
> CONFIG_SYSTEM_DATA_VERIFICATION=y
> CONFIG_PROFILING=y
> CONFIG_TRACEPOINTS=y
> CONFIG_64BIT=y
> CONFIG_X86_64=y
> CONFIG_X86=y
> CONFIG_INSTRUCTION_DECODER=y
> CONFIG_OUTPUT_FORMAT="elf64-x86-64"
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_MMU=y
> CONFIG_ARCH_MMAP_RND_BITS_MIN=28
> CONFIG_ARCH_MMAP_RND_BITS_MAX=32
> CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
> CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_ARCH_HAS_FILTER_PGPROT=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
> CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
> CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
> CONFIG_ZONE_DMA32=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
> CONFIG_HAVE_INTEL_TXT=y
> CONFIG_X86_64_SMP=y
> CONFIG_ARCH_SUPPORTS_UPROBES=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_PGTABLE_LEVELS=4
> CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
>
> #
> # Processor type and features
> #
> CONFIG_ZONE_DMA=y
> CONFIG_SMP=y
> CONFIG_X86_FEATURE_NAMES=y
> CONFIG_X86_X2APIC=y
> CONFIG_X86_MPPARSE=y
> # CONFIG_GOLDFISH is not set
> # CONFIG_RETPOLINE is not set
> # CONFIG_X86_CPU_RESCTRL is not set
> CONFIG_X86_EXTENDED_PLATFORM=y
> # CONFIG_X86_NUMACHIP is not set
> # CONFIG_X86_VSMP is not set
> # CONFIG_X86_UV is not set
> # CONFIG_X86_GOLDFISH is not set
> # CONFIG_X86_INTEL_MID is not set
> # CONFIG_X86_INTEL_LPSS is not set
> # CONFIG_X86_AMD_PLATFORM_DEVICE is not set
> # CONFIG_IOSF_MBI is not set
> CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
> CONFIG_SCHED_OMIT_FRAME_POINTER=y
> # CONFIG_HYPERVISOR_GUEST is not set
> # CONFIG_MK8 is not set
> # CONFIG_MPSC is not set
> CONFIG_MCORE2=y
> # CONFIG_MATOM is not set
> # CONFIG_GENERIC_CPU is not set
> CONFIG_X86_INTERNODE_CACHE_SHIFT=6
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_P6_NOP=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=64
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_CPU_SUP_INTEL=y
> CONFIG_CPU_SUP_AMD=y
> CONFIG_CPU_SUP_HYGON=y
> CONFIG_CPU_SUP_CENTAUR=y
> CONFIG_HPET_TIMER=y
> CONFIG_DMI=y
> # CONFIG_GART_IOMMU is not set
> # CONFIG_CALGARY_IOMMU is not set
> # CONFIG_MAXSMP is not set
> CONFIG_NR_CPUS_RANGE_BEGIN=2
> CONFIG_NR_CPUS_RANGE_END=512
> CONFIG_NR_CPUS_DEFAULT=64
> CONFIG_NR_CPUS=16
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> CONFIG_SCHED_MC_PRIO=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCELOG_LEGACY=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_X86_MCE_AMD=y
> CONFIG_X86_MCE_THRESHOLD=y
> # CONFIG_X86_MCE_INJECT is not set
> CONFIG_X86_THERMAL_VECTOR=y
>
> #
> # Performance monitoring
> #
> CONFIG_PERF_EVENTS_INTEL_UNCORE=y
> # CONFIG_PERF_EVENTS_INTEL_RAPL is not set
> # CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
> # CONFIG_PERF_EVENTS_AMD_POWER is not set
> CONFIG_X86_16BIT=y
> CONFIG_X86_ESPFIX64=y
> CONFIG_X86_VSYSCALL_EMULATION=y
> # CONFIG_I8K is not set
> CONFIG_MICROCODE=y
> CONFIG_MICROCODE_INTEL=y
> CONFIG_MICROCODE_AMD=y
> CONFIG_MICROCODE_OLD_INTERFACE=y
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> # CONFIG_X86_5LEVEL is not set
> # CONFIG_X86_CPA_STATISTICS is not set
> CONFIG_ARCH_HAS_MEM_ENCRYPT=y
> # CONFIG_AMD_MEM_ENCRYPT is not set
> CONFIG_NUMA=y
> CONFIG_AMD_NUMA=y
> CONFIG_X86_64_ACPI_NUMA=y
> CONFIG_NODES_SPAN_OTHER_NODES=y
> # CONFIG_NUMA_EMU is not set
> CONFIG_NODES_SHIFT=1
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_ARCH_MEMORY_PROBE=y
> CONFIG_ARCH_PROC_KCORE_TEXT=y
> CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
> CONFIG_X86_PMEM_LEGACY_DEVICE=y
> CONFIG_X86_PMEM_LEGACY=y
> # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> CONFIG_X86_RESERVE_LOW=64
> CONFIG_MTRR=y
> CONFIG_MTRR_SANITIZER=y
> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
> CONFIG_X86_PAT=y
> CONFIG_ARCH_USES_PG_UNCACHED=y
> CONFIG_ARCH_RANDOM=y
> CONFIG_X86_SMAP=y
> CONFIG_X86_INTEL_UMIP=y
> CONFIG_X86_INTEL_MPX=y
> CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
> CONFIG_EFI=y
> CONFIG_EFI_STUB=y
> CONFIG_EFI_MIXED=y
> CONFIG_SECCOMP=y
> CONFIG_HZ_100=y
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=100
> CONFIG_SCHED_HRTICK=y
> CONFIG_KEXEC=y
> CONFIG_KEXEC_FILE=y
> CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
> CONFIG_KEXEC_VERIFY_SIG=y
> CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
> # CONFIG_CRASH_DUMP is not set
> CONFIG_KEXEC_JUMP=y
> CONFIG_PHYSICAL_START=0x1000000
> CONFIG_RELOCATABLE=y
> # CONFIG_RANDOMIZE_BASE is not set
> CONFIG_PHYSICAL_ALIGN=0x200000
> CONFIG_HOTPLUG_CPU=y
> # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
> # CONFIG_DEBUG_HOTPLUG_CPU0 is not set
> # CONFIG_COMPAT_VDSO is not set
> # CONFIG_LEGACY_VSYSCALL_EMULATE is not set
> CONFIG_LEGACY_VSYSCALL_NONE=y
> # CONFIG_CMDLINE_BOOL is not set
> CONFIG_MODIFY_LDT_SYSCALL=y
> CONFIG_HAVE_LIVEPATCH=y
> # CONFIG_LIVEPATCH is not set
> CONFIG_ARCH_HAS_ADD_PAGES=y
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
> CONFIG_USE_PERCPU_NUMA_NODE_ID=y
> CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
> CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
>
> #
> # Power management and ACPI options
> #
> CONFIG_ARCH_HIBERNATION_HEADER=y
> CONFIG_SUSPEND=y
> CONFIG_SUSPEND_FREEZER=y
> CONFIG_HIBERNATE_CALLBACKS=y
> CONFIG_HIBERNATION=y
> CONFIG_PM_STD_PARTITION=""
> CONFIG_PM_SLEEP=y
> CONFIG_PM_SLEEP_SMP=y
> # CONFIG_PM_AUTOSLEEP is not set
> CONFIG_PM_WAKELOCKS=y
> CONFIG_PM_WAKELOCKS_LIMIT=100
> CONFIG_PM_WAKELOCKS_GC=y
> CONFIG_PM=y
> CONFIG_PM_DEBUG=y
> CONFIG_PM_ADVANCED_DEBUG=y
> CONFIG_PM_SLEEP_DEBUG=y
> CONFIG_PM_TRACE=y
> CONFIG_PM_TRACE_RTC=y
> CONFIG_PM_CLK=y
> CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
> # CONFIG_ENERGY_MODEL is not set
> CONFIG_ARCH_SUPPORTS_ACPI=y
> CONFIG_ACPI=y
> CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
> CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
> CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
> CONFIG_ACPI_DEBUGGER=y
> CONFIG_ACPI_DEBUGGER_USER=y
> CONFIG_ACPI_SPCR_TABLE=y
> CONFIG_ACPI_LPIT=y
> CONFIG_ACPI_SLEEP=y
> # CONFIG_ACPI_PROCFS_POWER is not set
> CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
> # CONFIG_ACPI_EC_DEBUGFS is not set
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_FAN=y
> # CONFIG_ACPI_TAD is not set
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_CPU_FREQ_PSS=y
> CONFIG_ACPI_PROCESSOR_CSTATE=y
> CONFIG_ACPI_PROCESSOR_IDLE=y
> CONFIG_ACPI_CPPC_LIB=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_NUMA=y
> CONFIG_ACPI_CUSTOM_DSDT_FILE=""
> CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
> CONFIG_ACPI_TABLE_UPGRADE=y
> CONFIG_ACPI_DEBUG=y
> CONFIG_ACPI_PCI_SLOT=y
> CONFIG_ACPI_CONTAINER=y
> CONFIG_ACPI_HOTPLUG_MEMORY=y
> CONFIG_ACPI_HOTPLUG_IOAPIC=y
> # CONFIG_ACPI_SBS is not set
> CONFIG_ACPI_HED=y
> # CONFIG_ACPI_CUSTOM_METHOD is not set
> CONFIG_ACPI_BGRT=y
> # CONFIG_ACPI_NFIT is not set
> CONFIG_HAVE_ACPI_APEI=y
> CONFIG_HAVE_ACPI_APEI_NMI=y
> CONFIG_ACPI_APEI=y
> CONFIG_ACPI_APEI_GHES=y
> CONFIG_ACPI_APEI_PCIEAER=y
> CONFIG_ACPI_APEI_MEMORY_FAILURE=y
> # CONFIG_ACPI_APEI_EINJ is not set
> # CONFIG_ACPI_APEI_ERST_DEBUG is not set
> # CONFIG_DPTF_POWER is not set
> # CONFIG_PMIC_OPREGION is not set
> # CONFIG_ACPI_CONFIGFS is not set
> CONFIG_TPS68470_PMIC_OPREGION=y
> CONFIG_X86_PM_TIMER=y
> CONFIG_SFI=y
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_GOV_ATTR_SET=y
> CONFIG_CPU_FREQ_GOV_COMMON=y
> # CONFIG_CPU_FREQ_STAT is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
>
> #
> # CPU frequency scaling drivers
> #
> CONFIG_X86_INTEL_PSTATE=y
> CONFIG_X86_PCC_CPUFREQ=y
> # CONFIG_X86_ACPI_CPUFREQ is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> # CONFIG_X86_P4_CLOCKMOD is not set
>
> #
> # shared options
> #
>
> #
> # CPU Idle
> #
> CONFIG_CPU_IDLE=y
> CONFIG_CPU_IDLE_GOV_LADDER=y
> CONFIG_CPU_IDLE_GOV_MENU=y
> CONFIG_INTEL_IDLE=y
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_MMCONF_FAM10H=y
> CONFIG_ISA_DMA_API=y
> CONFIG_AMD_NB=y
> CONFIG_X86_SYSFB=y
>
> #
> # Binary Emulations
> #
> CONFIG_IA32_EMULATION=y
> # CONFIG_IA32_AOUT is not set
> CONFIG_X86_X32=y
> CONFIG_COMPAT_32=y
> CONFIG_COMPAT=y
> CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
> CONFIG_SYSVIPC_COMPAT=y
> CONFIG_X86_DEV_DMA_OPS=y
> CONFIG_HAVE_GENERIC_GUP=y
>
> #
> # Firmware Drivers
> #
> CONFIG_EDD=y
> CONFIG_EDD_OFF=y
> CONFIG_FIRMWARE_MEMMAP=y
> CONFIG_DMIID=y
> # CONFIG_DMI_SYSFS is not set
> CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
> # CONFIG_ISCSI_IBFT_FIND is not set
> CONFIG_FW_CFG_SYSFS=m
> # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
> # CONFIG_GOOGLE_FIRMWARE is not set
>
> #
> # EFI (Extensible Firmware Interface) Support
> #
> CONFIG_EFI_VARS=y
> CONFIG_EFI_ESRT=y
> # CONFIG_EFI_VARS_PSTORE is not set
> CONFIG_EFI_RUNTIME_MAP=y
> # CONFIG_EFI_FAKE_MEMMAP is not set
> CONFIG_EFI_RUNTIME_WRAPPERS=y
> # CONFIG_EFI_BOOTLOADER_CONTROL is not set
> # CONFIG_EFI_CAPSULE_LOADER is not set
> # CONFIG_EFI_TEST is not set
> CONFIG_APPLE_PROPERTIES=y
> CONFIG_RESET_ATTACK_MITIGATION=y
> CONFIG_UEFI_CPER=y
> CONFIG_UEFI_CPER_X86=y
> CONFIG_EFI_DEV_PATH_PARSER=y
>
> #
> # Tegra firmware driver
> #
> CONFIG_HAVE_KVM=y
> CONFIG_VIRTUALIZATION=y
> # CONFIG_KVM is not set
> # CONFIG_VHOST_NET is not set
> # CONFIG_VHOST_SCSI is not set
> # CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
>
> #
> # General architecture-dependent options
> #
> CONFIG_CRASH_CORE=y
> CONFIG_KEXEC_CORE=y
> CONFIG_HOTPLUG_SMT=y
> # CONFIG_OPROFILE is not set
> CONFIG_HAVE_OPROFILE=y
> CONFIG_OPROFILE_NMI_TIMER=y
> # CONFIG_KPROBES is not set
> CONFIG_JUMP_LABEL=y
> # CONFIG_STATIC_KEYS_SELFTEST is not set
> CONFIG_UPROBES=y
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_ARCH_USE_BUILTIN_BSWAP=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_OPTPROBES=y
> CONFIG_HAVE_KPROBES_ON_FTRACE=y
> CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
> CONFIG_HAVE_NMI=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_CONTIGUOUS=y
> CONFIG_GENERIC_SMP_IDLE_THREAD=y
> CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
> CONFIG_ARCH_HAS_SET_MEMORY=y
> CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
> CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
> CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> CONFIG_HAVE_RSEQ=y
> CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
> CONFIG_HAVE_CLK=y
> CONFIG_HAVE_HW_BREAKPOINT=y
> CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
> CONFIG_HAVE_USER_RETURN_NOTIFIER=y
> CONFIG_HAVE_PERF_EVENTS_NMI=y
> CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
> CONFIG_HAVE_PERF_REGS=y
> CONFIG_HAVE_PERF_USER_STACK_DUMP=y
> CONFIG_HAVE_ARCH_JUMP_LABEL=y
> CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
> CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
> CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
> CONFIG_HAVE_CMPXCHG_LOCAL=y
> CONFIG_HAVE_CMPXCHG_DOUBLE=y
> CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
> CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
> CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
> CONFIG_SECCOMP_FILTER=y
> CONFIG_HAVE_ARCH_STACKLEAK=y
> CONFIG_HAVE_STACKPROTECTOR=y
> CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
> # CONFIG_STACKPROTECTOR is not set
> CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
> CONFIG_HAVE_CONTEXT_TRACKING=y
> CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
> CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
> CONFIG_HAVE_MOVE_PMD=y
> CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
> CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
> CONFIG_HAVE_ARCH_HUGE_VMAP=y
> CONFIG_HAVE_ARCH_SOFT_DIRTY=y
> CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
> CONFIG_MODULES_USE_ELF_RELA=y
> CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
> CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
> CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
> CONFIG_HAVE_EXIT_THREAD=y
> CONFIG_ARCH_MMAP_RND_BITS=28
> CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
> CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
> CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
> CONFIG_HAVE_COPY_THREAD_TLS=y
> CONFIG_HAVE_STACK_VALIDATION=y
> CONFIG_HAVE_RELIABLE_STACKTRACE=y
> CONFIG_OLD_SIGSUSPEND3=y
> CONFIG_COMPAT_OLD_SIGACTION=y
> CONFIG_COMPAT_32BIT_TIME=y
> CONFIG_HAVE_ARCH_VMAP_STACK=y
> CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
> CONFIG_STRICT_KERNEL_RWX=y
> CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
> CONFIG_STRICT_MODULE_RWX=y
> CONFIG_ARCH_HAS_REFCOUNT=y
> # CONFIG_REFCOUNT_FULL is not set
> CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
>
> #
> # GCOV-based kernel profiling
> #
> # CONFIG_GCOV_KERNEL is not set
> CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
> CONFIG_PLUGIN_HOSTCC=""
> CONFIG_HAVE_GCC_PLUGINS=y
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> # CONFIG_MODULE_FORCE_LOAD is not set
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> # CONFIG_MODVERSIONS is not set
> CONFIG_MODULE_SRCVERSION_ALL=y
> CONFIG_MODULE_SIG=y
> # CONFIG_MODULE_SIG_FORCE is not set
> CONFIG_MODULE_SIG_ALL=y
> # CONFIG_MODULE_SIG_SHA1 is not set
> # CONFIG_MODULE_SIG_SHA224 is not set
> # CONFIG_MODULE_SIG_SHA256 is not set
> # CONFIG_MODULE_SIG_SHA384 is not set
> CONFIG_MODULE_SIG_SHA512=y
> CONFIG_MODULE_SIG_HASH="sha512"
> # CONFIG_MODULE_COMPRESS is not set
> CONFIG_MODULES_TREE_LOOKUP=y
> CONFIG_BLOCK=y
> CONFIG_BLK_SCSI_REQUEST=y
> CONFIG_BLK_DEV_BSG=y
> CONFIG_BLK_DEV_BSGLIB=y
> CONFIG_BLK_DEV_INTEGRITY=y
> CONFIG_BLK_DEV_ZONED=y
> CONFIG_BLK_DEV_THROTTLING=y
> # CONFIG_BLK_DEV_THROTTLING_LOW is not set
> CONFIG_BLK_CMDLINE_PARSER=y
> # CONFIG_BLK_WBT is not set
> # CONFIG_BLK_CGROUP_IOLATENCY is not set
> CONFIG_BLK_DEBUG_FS=y
> CONFIG_BLK_DEBUG_FS_ZONED=y
> # CONFIG_BLK_SED_OPAL is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> # CONFIG_AIX_PARTITION is not set
> # CONFIG_OSF_PARTITION is not set
> # CONFIG_AMIGA_PARTITION is not set
> # CONFIG_ATARI_PARTITION is not set
> # CONFIG_MAC_PARTITION is not set
> CONFIG_MSDOS_PARTITION=y
> # CONFIG_BSD_DISKLABEL is not set
> # CONFIG_MINIX_SUBPARTITION is not set
> # CONFIG_SOLARIS_X86_PARTITION is not set
> # CONFIG_UNIXWARE_DISKLABEL is not set
> # CONFIG_LDM_PARTITION is not set
> # CONFIG_SGI_PARTITION is not set
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> # CONFIG_KARMA_PARTITION is not set
> CONFIG_EFI_PARTITION=y
> # CONFIG_SYSV68_PARTITION is not set
> # CONFIG_CMDLINE_PARTITION is not set
> CONFIG_BLOCK_COMPAT=y
> CONFIG_BLK_MQ_PCI=y
> CONFIG_BLK_MQ_VIRTIO=y
> CONFIG_BLK_MQ_RDMA=y
> CONFIG_BLK_PM=y
>
> #
> # IO Schedulers
> #
> CONFIG_MQ_IOSCHED_DEADLINE=m
> CONFIG_MQ_IOSCHED_KYBER=m
> CONFIG_IOSCHED_BFQ=m
> CONFIG_BFQ_GROUP_IOSCHED=y
> CONFIG_ASN1=y
> CONFIG_UNINLINE_SPIN_UNLOCK=y
> CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
> CONFIG_MUTEX_SPIN_ON_OWNER=y
> CONFIG_RWSEM_SPIN_ON_OWNER=y
> CONFIG_LOCK_SPIN_ON_OWNER=y
> CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
> CONFIG_QUEUED_SPINLOCKS=y
> CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
> CONFIG_QUEUED_RWLOCKS=y
> CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
> CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
> CONFIG_FREEZER=y
>
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_COMPAT_BINFMT_ELF=y
> CONFIG_ELFCORE=y
> CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
> CONFIG_BINFMT_SCRIPT=y
> # CONFIG_BINFMT_MISC is not set
> CONFIG_COREDUMP=y
>
> #
> # Memory Management options
> #
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_SPARSEMEM_MANUAL=y
> CONFIG_SPARSEMEM=y
> CONFIG_NEED_MULTIPLE_NODES=y
> CONFIG_HAVE_MEMORY_PRESENT=y
> CONFIG_SPARSEMEM_EXTREME=y
> CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> CONFIG_SPARSEMEM_VMEMMAP=y
> CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
> CONFIG_ARCH_DISCARD_MEMBLOCK=y
> CONFIG_MEMORY_ISOLATION=y
> CONFIG_HAVE_BOOTMEM_INFO_NODE=y
> CONFIG_MEMORY_HOTPLUG=y
> CONFIG_MEMORY_HOTPLUG_SPARSE=y
> CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
> CONFIG_MEMORY_HOTREMOVE=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_MEMORY_BALLOON=y
> CONFIG_BALLOON_COMPACTION=y
> CONFIG_COMPACTION=y
> CONFIG_MIGRATION=y
> CONFIG_PHYS_ADDR_T_64BIT=y
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_MMU_NOTIFIER=y
> CONFIG_KSM=y
> CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
> CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
> CONFIG_MEMORY_FAILURE=y
> # CONFIG_HWPOISON_INJECT is not set
> # CONFIG_TRANSPARENT_HUGEPAGE is not set
> CONFIG_ARCH_WANTS_THP_SWAP=y
> # CONFIG_CLEANCACHE is not set
> # CONFIG_FRONTSWAP is not set
> # CONFIG_CMA is not set
> CONFIG_MEM_SOFT_DIRTY=y
> CONFIG_ZPOOL=y
> CONFIG_ZBUD=y
> # CONFIG_Z3FOLD is not set
> # CONFIG_ZSMALLOC is not set
> CONFIG_GENERIC_EARLY_IOREMAP=y
> # CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
> CONFIG_IDLE_PAGE_TRACKING=y
> CONFIG_ARCH_HAS_ZONE_DEVICE=y
> CONFIG_ZONE_DEVICE=y
> CONFIG_ARCH_HAS_HMM=y
> CONFIG_MIGRATE_VMA_HELPER=y
> CONFIG_DEV_PAGEMAP_OPS=y
> CONFIG_HMM=y
> CONFIG_HMM_MIRROR=y
> CONFIG_DEVICE_PRIVATE=y
> CONFIG_DEVICE_PUBLIC=y
> CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
> CONFIG_ARCH_HAS_PKEYS=y
> # CONFIG_PERCPU_STATS is not set
> # CONFIG_GUP_BENCHMARK is not set
> CONFIG_ARCH_HAS_PTE_SPECIAL=y
> CONFIG_NET=y
> CONFIG_NET_INGRESS=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_DIAG is not set
> CONFIG_UNIX=y
> # CONFIG_UNIX_DIAG is not set
> # CONFIG_TLS is not set
> # CONFIG_XFRM_USER is not set
> # CONFIG_NET_KEY is not set
> # CONFIG_SMC is not set
> # CONFIG_XDP_SOCKETS is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_IP_FIB_TRIE_STATS=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_VERBOSE=y
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE_DEMUX is not set
> CONFIG_NET_IP_TUNNEL=m
> CONFIG_IP_MROUTE_COMMON=y
> CONFIG_IP_MROUTE=y
> # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> CONFIG_SYN_COOKIES=y
> CONFIG_NET_UDP_TUNNEL=m
> # CONFIG_NET_FOU is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> # CONFIG_INET_XFRM_MODE_TUNNEL is not set
> # CONFIG_INET_XFRM_MODE_BEET is not set
> # CONFIG_INET_DIAG is not set
> CONFIG_TCP_CONG_ADVANCED=y
> # CONFIG_TCP_CONG_BIC is not set
> CONFIG_TCP_CONG_CUBIC=y
> # CONFIG_TCP_CONG_WESTWOOD is not set
> # CONFIG_TCP_CONG_HTCP is not set
> # CONFIG_TCP_CONG_HSTCP is not set
> # CONFIG_TCP_CONG_HYBLA is not set
> # CONFIG_TCP_CONG_VEGAS is not set
> # CONFIG_TCP_CONG_NV is not set
> # CONFIG_TCP_CONG_SCALABLE is not set
> # CONFIG_TCP_CONG_LP is not set
> # CONFIG_TCP_CONG_VENO is not set
> # CONFIG_TCP_CONG_YEAH is not set
> # CONFIG_TCP_CONG_ILLINOIS is not set
> # CONFIG_TCP_CONG_DCTCP is not set
> # CONFIG_TCP_CONG_CDG is not set
> # CONFIG_TCP_CONG_BBR is not set
> CONFIG_DEFAULT_CUBIC=y
> # CONFIG_DEFAULT_RENO is not set
> CONFIG_DEFAULT_TCP_CONG="cubic"
> CONFIG_TCP_MD5SIG=y
> CONFIG_IPV6=y
> CONFIG_IPV6_ROUTER_PREF=y
> CONFIG_IPV6_ROUTE_INFO=y
> # CONFIG_IPV6_OPTIMISTIC_DAD is not set
> # CONFIG_INET6_AH is not set
> # CONFIG_INET6_ESP is not set
> # CONFIG_INET6_IPCOMP is not set
> # CONFIG_IPV6_MIP6 is not set
> # CONFIG_IPV6_ILA is not set
> # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
> # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
> # CONFIG_INET6_XFRM_MODE_BEET is not set
> # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
> # CONFIG_IPV6_SIT is not set
> # CONFIG_IPV6_TUNNEL is not set
> CONFIG_IPV6_MULTIPLE_TABLES=y
> CONFIG_IPV6_SUBTREES=y
> CONFIG_IPV6_MROUTE=y
> CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
> CONFIG_IPV6_PIMSM_V2=y
> CONFIG_IPV6_SEG6_LWTUNNEL=y
> CONFIG_IPV6_SEG6_HMAC=y
> CONFIG_IPV6_SEG6_BPF=y
> # CONFIG_NETWORK_SECMARK is not set
> # CONFIG_NETWORK_PHY_TIMESTAMPING is not set
> CONFIG_NETFILTER=y
> CONFIG_NETFILTER_ADVANCED=y
>
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_INGRESS=y
> # CONFIG_NETFILTER_NETLINK_ACCT is not set
> # CONFIG_NETFILTER_NETLINK_QUEUE is not set
> # CONFIG_NETFILTER_NETLINK_LOG is not set
> # CONFIG_NETFILTER_NETLINK_OSF is not set
> # CONFIG_NF_CONNTRACK is not set
> # CONFIG_NF_LOG_NETDEV is not set
> # CONFIG_NF_TABLES is not set
> CONFIG_NETFILTER_XTABLES=m
>
> #
> # Xtables combined modules
> #
> # CONFIG_NETFILTER_XT_MARK is not set
>
> #
> # Xtables targets
> #
> # CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
> # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
> # CONFIG_NETFILTER_XT_TARGET_HMARK is not set
> # CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
> # CONFIG_NETFILTER_XT_TARGET_LOG is not set
> # CONFIG_NETFILTER_XT_TARGET_MARK is not set
> # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
> # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
> # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
> # CONFIG_NETFILTER_XT_TARGET_TEE is not set
> # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
>
> #
> # Xtables matches
> #
> # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
> # CONFIG_NETFILTER_XT_MATCH_BPF is not set
> # CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
> # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
> # CONFIG_NETFILTER_XT_MATCH_CPU is not set
> # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
> # CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
> # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
> # CONFIG_NETFILTER_XT_MATCH_ECN is not set
> # CONFIG_NETFILTER_XT_MATCH_ESP is not set
> # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
> # CONFIG_NETFILTER_XT_MATCH_HL is not set
> # CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
> # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
> # CONFIG_NETFILTER_XT_MATCH_L2TP is not set
> # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
> # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
> # CONFIG_NETFILTER_XT_MATCH_MAC is not set
> # CONFIG_NETFILTER_XT_MATCH_MARK is not set
> # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
> # CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
> # CONFIG_NETFILTER_XT_MATCH_OSF is not set
> # CONFIG_NETFILTER_XT_MATCH_OWNER is not set
> # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
> # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
> # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
> # CONFIG_NETFILTER_XT_MATCH_REALM is not set
> # CONFIG_NETFILTER_XT_MATCH_RECENT is not set
> # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
> # CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
> # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
> # CONFIG_NETFILTER_XT_MATCH_STRING is not set
> # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
> # CONFIG_NETFILTER_XT_MATCH_TIME is not set
> # CONFIG_NETFILTER_XT_MATCH_U32 is not set
> # CONFIG_IP_SET is not set
> # CONFIG_IP_VS is not set
>
> #
> # IP: Netfilter Configuration
> #
> # CONFIG_NF_SOCKET_IPV4 is not set
> # CONFIG_NF_TPROXY_IPV4 is not set
> # CONFIG_NF_DUP_IPV4 is not set
> # CONFIG_NF_LOG_ARP is not set
> # CONFIG_NF_LOG_IPV4 is not set
> # CONFIG_NF_REJECT_IPV4 is not set
> CONFIG_IP_NF_IPTABLES=m
> # CONFIG_IP_NF_MATCH_AH is not set
> # CONFIG_IP_NF_MATCH_ECN is not set
> # CONFIG_IP_NF_MATCH_TTL is not set
> # CONFIG_IP_NF_FILTER is not set
> # CONFIG_IP_NF_MANGLE is not set
> # CONFIG_IP_NF_RAW is not set
> # CONFIG_IP_NF_ARPTABLES is not set
>
> #
> # IPv6: Netfilter Configuration
> #
> # CONFIG_NF_SOCKET_IPV6 is not set
> # CONFIG_NF_TPROXY_IPV6 is not set
> # CONFIG_NF_DUP_IPV6 is not set
> # CONFIG_NF_REJECT_IPV6 is not set
> # CONFIG_NF_LOG_IPV6 is not set
> # CONFIG_IP6_NF_IPTABLES is not set
> CONFIG_BPFILTER=y
> CONFIG_BPFILTER_UMH=m
> # CONFIG_IP_DCCP is not set
> # CONFIG_IP_SCTP is not set
> # CONFIG_RDS is not set
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_L2TP is not set
> # CONFIG_BRIDGE is not set
> CONFIG_HAVE_NET_DSA=y
> # CONFIG_NET_DSA is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_PHONET is not set
> # CONFIG_6LOWPAN is not set
> # CONFIG_IEEE802154 is not set
> # CONFIG_NET_SCHED is not set
> CONFIG_DCB=y
> CONFIG_DNS_RESOLVER=y
> # CONFIG_BATMAN_ADV is not set
> # CONFIG_OPENVSWITCH is not set
> # CONFIG_VSOCKETS is not set
> # CONFIG_NETLINK_DIAG is not set
> # CONFIG_MPLS is not set
> # CONFIG_NET_NSH is not set
> # CONFIG_HSR is not set
> # CONFIG_NET_SWITCHDEV is not set
> # CONFIG_NET_L3_MASTER_DEV is not set
> # CONFIG_NET_NCSI is not set
> CONFIG_RPS=y
> CONFIG_RFS_ACCEL=y
> CONFIG_XPS=y
> CONFIG_CGROUP_NET_PRIO=y
> CONFIG_CGROUP_NET_CLASSID=y
> CONFIG_NET_RX_BUSY_POLL=y
> CONFIG_BQL=y
> CONFIG_BPF_JIT=y
> CONFIG_BPF_STREAM_PARSER=y
> CONFIG_NET_FLOW_LIMIT=y
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NET_DROP_MONITOR is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_CAN is not set
> # CONFIG_BT is not set
> # CONFIG_AF_RXRPC is not set
> # CONFIG_AF_KCM is not set
> CONFIG_STREAM_PARSER=y
> CONFIG_FIB_RULES=y
> CONFIG_WIRELESS=y
> # CONFIG_CFG80211 is not set
>
> #
> # CFG80211 needs to be enabled for MAC80211
> #
> CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
> # CONFIG_WIMAX is not set
> CONFIG_RFKILL=y
> CONFIG_RFKILL_INPUT=y
> # CONFIG_RFKILL_GPIO is not set
> # CONFIG_NET_9P is not set
> # CONFIG_CAIF is not set
> # CONFIG_CEPH_LIB is not set
> # CONFIG_NFC is not set
> # CONFIG_PSAMPLE is not set
> # CONFIG_NET_IFE is not set
> CONFIG_LWTUNNEL=y
> CONFIG_LWTUNNEL_BPF=y
> CONFIG_DST_CACHE=y
> CONFIG_GRO_CELLS=y
> CONFIG_NET_SOCK_MSG=y
> # CONFIG_NET_DEVLINK is not set
> CONFIG_MAY_USE_DEVLINK=y
> CONFIG_FAILOVER=m
> CONFIG_HAVE_EBPF_JIT=y
>
> #
> # Device Drivers
> #
> CONFIG_HAVE_EISA=y
> # CONFIG_EISA is not set
> CONFIG_HAVE_PCI=y
> CONFIG_PCI=y
> CONFIG_PCI_DOMAINS=y
> CONFIG_PCIEPORTBUS=y
> CONFIG_HOTPLUG_PCI_PCIE=y
> CONFIG_PCIEAER=y
> # CONFIG_PCIEAER_INJECT is not set
> # CONFIG_PCIE_ECRC is not set
> CONFIG_PCIEASPM=y
> CONFIG_PCIEASPM_DEBUG=y
> CONFIG_PCIEASPM_DEFAULT=y
> # CONFIG_PCIEASPM_POWERSAVE is not set
> # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
> # CONFIG_PCIEASPM_PERFORMANCE is not set
> CONFIG_PCIE_PME=y
> CONFIG_PCIE_DPC=y
> CONFIG_PCIE_PTM=y
> CONFIG_PCI_MSI=y
> CONFIG_PCI_MSI_IRQ_DOMAIN=y
> CONFIG_PCI_QUIRKS=y
> # CONFIG_PCI_DEBUG is not set
> CONFIG_PCI_REALLOC_ENABLE_AUTO=y
> # CONFIG_PCI_STUB is not set
> CONFIG_PCI_PF_STUB=m
> CONFIG_PCI_ATS=y
> CONFIG_PCI_LOCKLESS_CONFIG=y
> CONFIG_PCI_IOV=y
> CONFIG_PCI_PRI=y
> CONFIG_PCI_PASID=y
> CONFIG_PCI_P2PDMA=y
> CONFIG_PCI_LABEL=y
> CONFIG_HOTPLUG_PCI=y
> CONFIG_HOTPLUG_PCI_ACPI=y
> # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
> CONFIG_HOTPLUG_PCI_CPCI=y
> # CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
> # CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
> CONFIG_HOTPLUG_PCI_SHPC=y
>
> #
> # PCI controller drivers
> #
>
> #
> # Cadence PCIe controllers support
> #
> # CONFIG_VMD is not set
>
> #
> # DesignWare PCI Core Support
> #
> # CONFIG_PCIE_DW_PLAT_HOST is not set
> # CONFIG_PCIE_DW_PLAT_EP is not set
> # CONFIG_PCI_MESON is not set
>
> #
> # PCI Endpoint
> #
> CONFIG_PCI_ENDPOINT=y
> CONFIG_PCI_ENDPOINT_CONFIGFS=y
> # CONFIG_PCI_EPF_TEST is not set
>
> #
> # PCI switch controller drivers
> #
> # CONFIG_PCI_SW_SWITCHTEC is not set
> # CONFIG_PCCARD is not set
> # CONFIG_RAPIDIO is not set
>
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER=y
> CONFIG_UEVENT_HELPER_PATH=""
> CONFIG_DEVTMPFS=y
> CONFIG_DEVTMPFS_MOUNT=y
> # CONFIG_STANDALONE is not set
> CONFIG_PREVENT_FIRMWARE_BUILD=y
>
> #
> # Firmware loader
> #
> CONFIG_FW_LOADER=y
> CONFIG_EXTRA_FIRMWARE=""
> CONFIG_FW_LOADER_USER_HELPER=y
> # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
> CONFIG_ALLOW_DEV_COREDUMP=y
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
> # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
> CONFIG_GENERIC_CPU_AUTOPROBE=y
> CONFIG_GENERIC_CPU_VULNERABILITIES=y
> CONFIG_REGMAP=y
> CONFIG_REGMAP_I2C=y
> CONFIG_REGMAP_MMIO=y
> CONFIG_REGMAP_IRQ=y
> CONFIG_DMA_SHARED_BUFFER=y
> # CONFIG_DMA_FENCE_TRACE is not set
>
> #
> # Bus devices
> #
> CONFIG_CONNECTOR=y
> CONFIG_PROC_EVENTS=y
> # CONFIG_GNSS is not set
> # CONFIG_MTD is not set
> # CONFIG_OF is not set
> CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
> # CONFIG_PARPORT is not set
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG_MESSAGES is not set
>
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> CONFIG_BLK_DEV_NULL_BLK=m
> CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
> CONFIG_BLK_DEV_FD=m
> CONFIG_CDROM=y
> # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_DRBD is not set
> CONFIG_BLK_DEV_NBD=m
> # CONFIG_BLK_DEV_SKD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> CONFIG_BLK_DEV_RAM=m
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=4096
> # CONFIG_CDROM_PKTCDVD is not set
> # CONFIG_ATA_OVER_ETH is not set
> CONFIG_VIRTIO_BLK=m
> CONFIG_VIRTIO_BLK_SCSI=y
> # CONFIG_BLK_DEV_RBD is not set
> # CONFIG_BLK_DEV_RSXX is not set
>
> #
> # NVME Support
> #
> CONFIG_NVME_CORE=y
> CONFIG_BLK_DEV_NVME=y
> # CONFIG_NVME_MULTIPATH is not set
> CONFIG_NVME_FABRICS=m
> CONFIG_NVME_RDMA=m
> # CONFIG_NVME_FC is not set
> # CONFIG_NVME_TCP is not set
> CONFIG_NVME_TARGET=m
> CONFIG_NVME_TARGET_LOOP=m
> CONFIG_NVME_TARGET_RDMA=m
> # CONFIG_NVME_TARGET_FC is not set
> # CONFIG_NVME_TARGET_TCP is not set
>
> #
> # Misc devices
> #
> # CONFIG_AD525X_DPOT is not set
> # CONFIG_DUMMY_IRQ is not set
> # CONFIG_IBM_ASM is not set
> # CONFIG_PHANTOM is not set
> # CONFIG_SGI_IOC4 is not set
> # CONFIG_TIFM_CORE is not set
> # CONFIG_ICS932S401 is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> # CONFIG_HP_ILO is not set
> # CONFIG_APDS9802ALS is not set
> # CONFIG_ISL29003 is not set
> # CONFIG_ISL29020 is not set
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_SENSORS_BH1770 is not set
> # CONFIG_SENSORS_APDS990X is not set
> # CONFIG_HMC6352 is not set
> # CONFIG_DS1682 is not set
> # CONFIG_USB_SWITCH_FSA9480 is not set
> # CONFIG_SRAM is not set
> # CONFIG_PCI_ENDPOINT_TEST is not set
> # CONFIG_PVPANIC is not set
> # CONFIG_C2PORT is not set
>
> #
> # EEPROM support
> #
> # CONFIG_EEPROM_AT24 is not set
> # CONFIG_EEPROM_LEGACY is not set
> # CONFIG_EEPROM_MAX6875 is not set
> # CONFIG_EEPROM_93CX6 is not set
> # CONFIG_EEPROM_IDT_89HPESX is not set
> # CONFIG_EEPROM_EE1004 is not set
> # CONFIG_CB710_CORE is not set
>
> #
> # Texas Instruments shared transport line discipline
> #
> # CONFIG_TI_ST is not set
> # CONFIG_SENSORS_LIS3_I2C is not set
> # CONFIG_ALTERA_STAPL is not set
> # CONFIG_INTEL_MEI is not set
> # CONFIG_INTEL_MEI_ME is not set
> # CONFIG_INTEL_MEI_TXE is not set
> # CONFIG_VMWARE_VMCI is not set
>
> #
> # Intel MIC & related support
> #
>
> #
> # Intel MIC Bus Driver
> #
> # CONFIG_INTEL_MIC_BUS is not set
>
> #
> # SCIF Bus Driver
> #
> # CONFIG_SCIF_BUS is not set
>
> #
> # VOP Bus Driver
> #
> # CONFIG_VOP_BUS is not set
>
> #
> # Intel MIC Host Driver
> #
>
> #
> # Intel MIC Card Driver
> #
>
> #
> # SCIF Driver
> #
>
> #
> # Intel MIC Coprocessor State Management (COSM) Drivers
> #
>
> #
> # VOP Driver
> #
> # CONFIG_GENWQE is not set
> # CONFIG_ECHO is not set
> # CONFIG_MISC_ALCOR_PCI is not set
> # CONFIG_MISC_RTSX_PCI is not set
> # CONFIG_MISC_RTSX_USB is not set
> CONFIG_HAVE_IDE=y
> # CONFIG_IDE is not set
>
> #
> # SCSI device support
> #
> CONFIG_SCSI_MOD=y
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> CONFIG_SCSI_PROC_FS=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=y
> # CONFIG_CHR_DEV_SCH is not set
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
> CONFIG_SCSI_SCAN_ASYNC=y
>
> #
> # SCSI Transports
> #
> CONFIG_SCSI_SPI_ATTRS=m
> # CONFIG_SCSI_FC_ATTRS is not set
> CONFIG_SCSI_ISCSI_ATTRS=m
> # CONFIG_SCSI_SAS_ATTRS is not set
> # CONFIG_SCSI_SAS_LIBSAS is not set
> CONFIG_SCSI_SRP_ATTRS=m
> CONFIG_SCSI_LOWLEVEL=y
> CONFIG_ISCSI_TCP=m
> # CONFIG_ISCSI_BOOT_SYSFS is not set
> # CONFIG_SCSI_CXGB3_ISCSI is not set
> # CONFIG_SCSI_CXGB4_ISCSI is not set
> # CONFIG_SCSI_BNX2_ISCSI is not set
> # CONFIG_BE2ISCSI is not set
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_HPSA is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_3W_SAS is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_AIC94XX is not set
> # CONFIG_SCSI_MVSAS is not set
> # CONFIG_SCSI_MVUMI is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_ARCMSR is not set
> # CONFIG_SCSI_ESAS2R is not set
> CONFIG_MEGARAID_NEWGEN=y
> # CONFIG_MEGARAID_MM is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_MEGARAID_SAS is not set
> # CONFIG_SCSI_MPT3SAS is not set
> # CONFIG_SCSI_MPT2SAS is not set
> # CONFIG_SCSI_SMARTPQI is not set
> # CONFIG_SCSI_UFSHCD is not set
> # CONFIG_SCSI_HPTIOP is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_MYRB is not set
> # CONFIG_SCSI_MYRS is not set
> # CONFIG_VMWARE_PVSCSI is not set
> # CONFIG_SCSI_SNIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_ISCI is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_STEX is not set
> CONFIG_SCSI_SYM53C8XX_2=m
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> CONFIG_SCSI_SYM53C8XX_MMIO=y
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_QLA_ISCSI is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_WD719X is not set
> CONFIG_SCSI_DEBUG=m
> # CONFIG_SCSI_PMCRAID is not set
> # CONFIG_SCSI_PM8001 is not set
> CONFIG_SCSI_VIRTIO=m
> CONFIG_SCSI_DH=y
> CONFIG_SCSI_DH_RDAC=m
> CONFIG_SCSI_DH_HP_SW=m
> CONFIG_SCSI_DH_EMC=m
> CONFIG_SCSI_DH_ALUA=m
> CONFIG_ATA=y
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_ZPODD=y
> CONFIG_SATA_PMP=y
>
> #
> # Controllers with non-SFF native interface
> #
> # CONFIG_SATA_AHCI is not set
> # CONFIG_SATA_AHCI_PLATFORM is not set
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_SATA_ACARD_AHCI is not set
> # CONFIG_SATA_SIL24 is not set
> CONFIG_ATA_SFF=y
>
> #
> # SFF controllers with custom DMA interface
> #
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_SX4 is not set
> CONFIG_ATA_BMDMA=y
>
> #
> # SATA SFF controllers with BMDMA
> #
> CONFIG_ATA_PIIX=y
> # CONFIG_SATA_MV is not set
> # CONFIG_SATA_NV is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SIL is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_SVW is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
>
> #
> # PATA SFF controllers with BMDMA
> #
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_ATP867X is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_MARVELL is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RDC is not set
> # CONFIG_PATA_SCH is not set
> # CONFIG_PATA_SERVERWORKS is not set
> # CONFIG_PATA_SIL680 is not set
> CONFIG_PATA_SIS=y
> # CONFIG_PATA_TOSHIBA is not set
> # CONFIG_PATA_TRIFLEX is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
>
> #
> # PIO-only SFF controllers
> #
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_MPIIX is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_RZ1000 is not set
>
> #
> # Generic fallback / legacy drivers
> #
> CONFIG_PATA_ACPI=m
> CONFIG_ATA_GENERIC=y
> # CONFIG_PATA_LEGACY is not set
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_AUTODETECT=y
> CONFIG_MD_LINEAR=m
> # CONFIG_MD_RAID0 is not set
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID10 is not set
> # CONFIG_MD_RAID456 is not set
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_MD_FAULTY is not set
> # CONFIG_BCACHE is not set
> CONFIG_BLK_DEV_DM_BUILTIN=y
> CONFIG_BLK_DEV_DM=y
> # CONFIG_DM_DEBUG is not set
> # CONFIG_DM_UNSTRIPED is not set
> # CONFIG_DM_CRYPT is not set
> # CONFIG_DM_SNAPSHOT is not set
> # CONFIG_DM_THIN_PROVISIONING is not set
> # CONFIG_DM_CACHE is not set
> # CONFIG_DM_WRITECACHE is not set
> # CONFIG_DM_ERA is not set
> # CONFIG_DM_MIRROR is not set
> # CONFIG_DM_RAID is not set
> # CONFIG_DM_ZERO is not set
> CONFIG_DM_MULTIPATH=m
> CONFIG_DM_MULTIPATH_QL=m
> CONFIG_DM_MULTIPATH_ST=m
> # CONFIG_DM_DELAY is not set
> CONFIG_DM_UEVENT=y
> # CONFIG_DM_FLAKEY is not set
> # CONFIG_DM_VERITY is not set
> # CONFIG_DM_SWITCH is not set
> # CONFIG_DM_LOG_WRITES is not set
> # CONFIG_DM_INTEGRITY is not set
> # CONFIG_DM_ZONED is not set
> CONFIG_TARGET_CORE=m
> CONFIG_TCM_IBLOCK=m
> CONFIG_TCM_FILEIO=m
> CONFIG_TCM_PSCSI=m
> CONFIG_LOOPBACK_TARGET=m
> CONFIG_ISCSI_TARGET=m
> # CONFIG_FUSION is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_FIREWIRE is not set
> # CONFIG_FIREWIRE_NOSY is not set
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=y
> CONFIG_NET_CORE=y
> # CONFIG_BONDING is not set
> # CONFIG_DUMMY is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_NET_FC is not set
> # CONFIG_NET_TEAM is not set
> # CONFIG_MACVLAN is not set
> # CONFIG_IPVLAN is not set
> # CONFIG_VXLAN is not set
> # CONFIG_GENEVE is not set
> # CONFIG_GTP is not set
> # CONFIG_MACSEC is not set
> # CONFIG_NETCONSOLE is not set
> CONFIG_TUN=y
> # CONFIG_TUN_VNET_CROSS_LE is not set
> # CONFIG_VETH is not set
> CONFIG_VIRTIO_NET=m
> # CONFIG_NLMON is not set
> # CONFIG_ARCNET is not set
>
> #
> # CAIF transport drivers
> #
>
> #
> # Distributed Switch Architecture drivers
> #
> CONFIG_ETHERNET=y
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_NET_VENDOR_ADAPTEC is not set
> # CONFIG_NET_VENDOR_AGERE is not set
> # CONFIG_NET_VENDOR_ALACRITECH is not set
> # CONFIG_NET_VENDOR_ALTEON is not set
> # CONFIG_ALTERA_TSE is not set
> # CONFIG_NET_VENDOR_AMAZON is not set
> # CONFIG_NET_VENDOR_AMD is not set
> # CONFIG_NET_VENDOR_AQUANTIA is not set
> # CONFIG_NET_VENDOR_ARC is not set
> # CONFIG_NET_VENDOR_ATHEROS is not set
> # CONFIG_NET_VENDOR_AURORA is not set
> # CONFIG_NET_VENDOR_BROADCOM is not set
> # CONFIG_NET_VENDOR_BROCADE is not set
> # CONFIG_NET_VENDOR_CADENCE is not set
> # CONFIG_NET_VENDOR_CAVIUM is not set
> # CONFIG_NET_VENDOR_CHELSIO is not set
> # CONFIG_NET_VENDOR_CISCO is not set
> # CONFIG_NET_VENDOR_CORTINA is not set
> # CONFIG_CX_ECAT is not set
> # CONFIG_DNET is not set
> # CONFIG_NET_VENDOR_DEC is not set
> # CONFIG_NET_VENDOR_DLINK is not set
> # CONFIG_NET_VENDOR_EMULEX is not set
> # CONFIG_NET_VENDOR_EZCHIP is not set
> # CONFIG_NET_VENDOR_HP is not set
> # CONFIG_NET_VENDOR_HUAWEI is not set
> # CONFIG_NET_VENDOR_INTEL is not set
> # CONFIG_JME is not set
> # CONFIG_NET_VENDOR_MARVELL is not set
> # CONFIG_NET_VENDOR_MELLANOX is not set
> # CONFIG_NET_VENDOR_MICREL is not set
> # CONFIG_NET_VENDOR_MICROCHIP is not set
> # CONFIG_NET_VENDOR_MICROSEMI is not set
> # CONFIG_NET_VENDOR_MYRI is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NET_VENDOR_NATSEMI is not set
> # CONFIG_NET_VENDOR_NETERION is not set
> # CONFIG_NET_VENDOR_NETRONOME is not set
> # CONFIG_NET_VENDOR_NI is not set
> # CONFIG_NET_VENDOR_NVIDIA is not set
> # CONFIG_NET_VENDOR_OKI is not set
> # CONFIG_ETHOC is not set
> # CONFIG_NET_VENDOR_PACKET_ENGINES is not set
> # CONFIG_NET_VENDOR_QLOGIC is not set
> # CONFIG_NET_VENDOR_QUALCOMM is not set
> # CONFIG_NET_VENDOR_RDC is not set
> # CONFIG_NET_VENDOR_REALTEK is not set
> # CONFIG_NET_VENDOR_RENESAS is not set
> # CONFIG_NET_VENDOR_ROCKER is not set
> # CONFIG_NET_VENDOR_SAMSUNG is not set
> # CONFIG_NET_VENDOR_SEEQ is not set
> # CONFIG_NET_VENDOR_SOLARFLARE is not set
> # CONFIG_NET_VENDOR_SILAN is not set
> # CONFIG_NET_VENDOR_SIS is not set
> # CONFIG_NET_VENDOR_SMSC is not set
> # CONFIG_NET_VENDOR_SOCIONEXT is not set
> # CONFIG_NET_VENDOR_STMICRO is not set
> # CONFIG_NET_VENDOR_SUN is not set
> # CONFIG_NET_VENDOR_SYNOPSYS is not set
> # CONFIG_NET_VENDOR_TEHUTI is not set
> # CONFIG_NET_VENDOR_TI is not set
> # CONFIG_NET_VENDOR_VIA is not set
> # CONFIG_NET_VENDOR_WIZNET is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_NET_SB1000 is not set
> # CONFIG_MDIO_DEVICE is not set
> # CONFIG_PHYLIB is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_USB_NET_DRIVERS is not set
> CONFIG_WLAN=y
> CONFIG_WLAN_VENDOR_ADMTEK=y
> CONFIG_WLAN_VENDOR_ATH=y
> # CONFIG_ATH_DEBUG is not set
> CONFIG_ATH5K_PCI=y
> CONFIG_WLAN_VENDOR_ATMEL=y
> CONFIG_WLAN_VENDOR_BROADCOM=y
> CONFIG_WLAN_VENDOR_CISCO=y
> CONFIG_WLAN_VENDOR_INTEL=y
> # CONFIG_IWLWIFI is not set
> CONFIG_WLAN_VENDOR_INTERSIL=y
> # CONFIG_HOSTAP is not set
> # CONFIG_PRISM54 is not set
> CONFIG_WLAN_VENDOR_MARVELL=y
> CONFIG_WLAN_VENDOR_MEDIATEK=y
> CONFIG_WLAN_VENDOR_RALINK=y
> CONFIG_WLAN_VENDOR_REALTEK=y
> CONFIG_WLAN_VENDOR_RSI=y
> CONFIG_WLAN_VENDOR_ST=y
> CONFIG_WLAN_VENDOR_TI=y
> CONFIG_WLAN_VENDOR_ZYDAS=y
> CONFIG_WLAN_VENDOR_QUANTENNA=y
>
> #
> # Enable WiMAX (Networking options) to see the WiMAX drivers
> #
> CONFIG_WAN=y
> # CONFIG_HDLC is not set
> # CONFIG_DLCI is not set
> # CONFIG_SBNI is not set
> # CONFIG_VMXNET3 is not set
> # CONFIG_FUJITSU_ES is not set
> # CONFIG_NETDEVSIM is not set
> CONFIG_NET_FAILOVER=m
> CONFIG_ISDN=y
> # CONFIG_ISDN_I4L is not set
> # CONFIG_ISDN_CAPI is not set
> # CONFIG_ISDN_DRV_GIGASET is not set
> # CONFIG_HYSDN is not set
> # CONFIG_MISDN is not set
> # CONFIG_NVM is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
> # CONFIG_INPUT_FF_MEMLESS is not set
> # CONFIG_INPUT_POLLDEV is not set
> # CONFIG_INPUT_SPARSEKMAP is not set
> # CONFIG_INPUT_MATRIXKMAP is not set
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_JOYDEV=m
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> # CONFIG_KEYBOARD_ADP5520 is not set
> # CONFIG_KEYBOARD_ADP5588 is not set
> # CONFIG_KEYBOARD_ADP5589 is not set
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_QT2160 is not set
> # CONFIG_KEYBOARD_DLINK_DIR685 is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_GPIO is not set
> # CONFIG_KEYBOARD_GPIO_POLLED is not set
> # CONFIG_KEYBOARD_TCA6416 is not set
> # CONFIG_KEYBOARD_TCA8418 is not set
> # CONFIG_KEYBOARD_MATRIX is not set
> # CONFIG_KEYBOARD_LM8333 is not set
> # CONFIG_KEYBOARD_MAX7359 is not set
> # CONFIG_KEYBOARD_MCS is not set
> # CONFIG_KEYBOARD_MPR121 is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_OPENCORES is not set
> # CONFIG_KEYBOARD_SAMSUNG is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_TWL4030 is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=m
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_BYD=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
> CONFIG_MOUSE_PS2_CYPRESS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> CONFIG_MOUSE_PS2_ELANTECH=y
> CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
> CONFIG_MOUSE_PS2_SENTELIC=y
> CONFIG_MOUSE_PS2_TOUCHKIT=y
> CONFIG_MOUSE_PS2_FOCALTECH=y
> CONFIG_MOUSE_PS2_SMBUS=y
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_APPLETOUCH is not set
> # CONFIG_MOUSE_BCM5974 is not set
> # CONFIG_MOUSE_CYAPA is not set
> # CONFIG_MOUSE_ELAN_I2C is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_MOUSE_GPIO is not set
> # CONFIG_MOUSE_SYNAPTICS_I2C is not set
> # CONFIG_MOUSE_SYNAPTICS_USB is not set
> CONFIG_INPUT_JOYSTICK=y
> # CONFIG_JOYSTICK_ANALOG is not set
> # CONFIG_JOYSTICK_A3D is not set
> # CONFIG_JOYSTICK_ADI is not set
> # CONFIG_JOYSTICK_COBRA is not set
> # CONFIG_JOYSTICK_GF2K is not set
> # CONFIG_JOYSTICK_GRIP is not set
> # CONFIG_JOYSTICK_GRIP_MP is not set
> # CONFIG_JOYSTICK_GUILLEMOT is not set
> # CONFIG_JOYSTICK_INTERACT is not set
> # CONFIG_JOYSTICK_SIDEWINDER is not set
> # CONFIG_JOYSTICK_TMDC is not set
> # CONFIG_JOYSTICK_IFORCE is not set
> # CONFIG_JOYSTICK_WARRIOR is not set
> # CONFIG_JOYSTICK_MAGELLAN is not set
> # CONFIG_JOYSTICK_SPACEORB is not set
> # CONFIG_JOYSTICK_SPACEBALL is not set
> # CONFIG_JOYSTICK_STINGER is not set
> # CONFIG_JOYSTICK_TWIDJOY is not set
> # CONFIG_JOYSTICK_ZHENHUA is not set
> # CONFIG_JOYSTICK_AS5011 is not set
> # CONFIG_JOYSTICK_JOYDUMP is not set
> # CONFIG_JOYSTICK_XPAD is not set
> # CONFIG_JOYSTICK_PXRC is not set
> CONFIG_INPUT_TABLET=y
> # CONFIG_TABLET_USB_ACECAD is not set
> # CONFIG_TABLET_USB_AIPTEK is not set
> # CONFIG_TABLET_USB_GTCO is not set
> # CONFIG_TABLET_USB_HANWANG is not set
> # CONFIG_TABLET_USB_KBTAB is not set
> # CONFIG_TABLET_USB_PEGASUS is not set
> # CONFIG_TABLET_SERIAL_WACOM4 is not set
> CONFIG_INPUT_TOUCHSCREEN=y
> CONFIG_TOUCHSCREEN_PROPERTIES=y
> # CONFIG_TOUCHSCREEN_88PM860X is not set
> # CONFIG_TOUCHSCREEN_AD7879 is not set
> # CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
> # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
> # CONFIG_TOUCHSCREEN_BU21013 is not set
> # CONFIG_TOUCHSCREEN_BU21029 is not set
> # CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
> # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
> # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
> # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
> # CONFIG_TOUCHSCREEN_DA9034 is not set
> # CONFIG_TOUCHSCREEN_DA9052 is not set
> # CONFIG_TOUCHSCREEN_DYNAPRO is not set
> # CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
> # CONFIG_TOUCHSCREEN_EETI is not set
> # CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
> # CONFIG_TOUCHSCREEN_EXC3000 is not set
> # CONFIG_TOUCHSCREEN_FUJITSU is not set
> # CONFIG_TOUCHSCREEN_GOODIX is not set
> # CONFIG_TOUCHSCREEN_HIDEEP is not set
> # CONFIG_TOUCHSCREEN_ILI210X is not set
> # CONFIG_TOUCHSCREEN_S6SY761 is not set
> # CONFIG_TOUCHSCREEN_GUNZE is not set
> # CONFIG_TOUCHSCREEN_EKTF2127 is not set
> CONFIG_TOUCHSCREEN_ELAN=y
> # CONFIG_TOUCHSCREEN_ELO is not set
> # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
> # CONFIG_TOUCHSCREEN_WACOM_I2C is not set
> # CONFIG_TOUCHSCREEN_MAX11801 is not set
> # CONFIG_TOUCHSCREEN_MCS5000 is not set
> # CONFIG_TOUCHSCREEN_MMS114 is not set
> # CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
> # CONFIG_TOUCHSCREEN_MTOUCH is not set
> # CONFIG_TOUCHSCREEN_INEXIO is not set
> # CONFIG_TOUCHSCREEN_MK712 is not set
> # CONFIG_TOUCHSCREEN_PENMOUNT is not set
> # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
> # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
> # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
> # CONFIG_TOUCHSCREEN_PIXCIR is not set
> # CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
> # CONFIG_TOUCHSCREEN_WM831X is not set
> # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
> # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
> # CONFIG_TOUCHSCREEN_TSC_SERIO is not set
> # CONFIG_TOUCHSCREEN_TSC2004 is not set
> # CONFIG_TOUCHSCREEN_TSC2007 is not set
> # CONFIG_TOUCHSCREEN_RM_TS is not set
> # CONFIG_TOUCHSCREEN_SILEAD is not set
> # CONFIG_TOUCHSCREEN_SIS_I2C is not set
> # CONFIG_TOUCHSCREEN_ST1232 is not set
> # CONFIG_TOUCHSCREEN_SX8654 is not set
> # CONFIG_TOUCHSCREEN_TPS6507X is not set
> # CONFIG_TOUCHSCREEN_ZET6223 is not set
> # CONFIG_TOUCHSCREEN_ZFORCE is not set
> # CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
> CONFIG_INPUT_MISC=y
> # CONFIG_INPUT_88PM860X_ONKEY is not set
> # CONFIG_INPUT_AD714X is not set
> # CONFIG_INPUT_BMA150 is not set
> # CONFIG_INPUT_E3X0_BUTTON is not set
> # CONFIG_INPUT_PCSPKR is not set
> # CONFIG_INPUT_MAX8925_ONKEY is not set
> # CONFIG_INPUT_MMA8450 is not set
> # CONFIG_INPUT_GP2A is not set
> # CONFIG_INPUT_GPIO_BEEPER is not set
> # CONFIG_INPUT_GPIO_DECODER is not set
> # CONFIG_INPUT_ATLAS_BTNS is not set
> # CONFIG_INPUT_ATI_REMOTE2 is not set
> # CONFIG_INPUT_KEYSPAN_REMOTE is not set
> # CONFIG_INPUT_KXTJ9 is not set
> # CONFIG_INPUT_POWERMATE is not set
> # CONFIG_INPUT_YEALINK is not set
> # CONFIG_INPUT_CM109 is not set
> # CONFIG_INPUT_TWL4030_PWRBUTTON is not set
> # CONFIG_INPUT_TWL4030_VIBRA is not set
> # CONFIG_INPUT_TWL6040_VIBRA is not set
> CONFIG_INPUT_UINPUT=y
> # CONFIG_INPUT_PALMAS_PWRBUTTON is not set
> # CONFIG_INPUT_PCF8574 is not set
> # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
> # CONFIG_INPUT_DA9052_ONKEY is not set
> # CONFIG_INPUT_DA9055_ONKEY is not set
> # CONFIG_INPUT_DA9063_ONKEY is not set
> # CONFIG_INPUT_WM831X_ON is not set
> # CONFIG_INPUT_ADXL34X is not set
> # CONFIG_INPUT_CMA3000 is not set
> # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
> # CONFIG_INPUT_DRV260X_HAPTICS is not set
> # CONFIG_INPUT_DRV2665_HAPTICS is not set
> # CONFIG_INPUT_DRV2667_HAPTICS is not set
> # CONFIG_RMI4_CORE is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> CONFIG_SERIO_RAW=m
> # CONFIG_SERIO_ALTERA_PS2 is not set
> # CONFIG_SERIO_PS2MULT is not set
> # CONFIG_SERIO_ARC_PS2 is not set
> # CONFIG_SERIO_OLPC_APSP is not set
> # CONFIG_SERIO_GPIO_PS2 is not set
> # CONFIG_USERIO is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_TTY=y
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_VT_CONSOLE_SLEEP=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=0
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_ROCKETPORT is not set
> # CONFIG_CYCLADES is not set
> # CONFIG_MOXA_INTELLIO is not set
> # CONFIG_MOXA_SMARTIO is not set
> # CONFIG_SYNCLINK is not set
> # CONFIG_SYNCLINKMP is not set
> # CONFIG_SYNCLINK_GT is not set
> # CONFIG_NOZOMI is not set
> # CONFIG_ISI is not set
> # CONFIG_N_HDLC is not set
> # CONFIG_N_GSM is not set
> # CONFIG_TRACE_SINK is not set
> CONFIG_DEVMEM=y
> # CONFIG_DEVKMEM is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_EARLYCON=y
> CONFIG_SERIAL_8250=y
> # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
> CONFIG_SERIAL_8250_PNP=y
> CONFIG_SERIAL_8250_FINTEK=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_PCI=y
> # CONFIG_SERIAL_8250_EXAR is not set
> CONFIG_SERIAL_8250_NR_UARTS=48
> CONFIG_SERIAL_8250_RUNTIME_UARTS=32
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> # CONFIG_SERIAL_8250_DETECT_IRQ is not set
> CONFIG_SERIAL_8250_RSA=y
> # CONFIG_SERIAL_8250_DW is not set
> CONFIG_SERIAL_8250_RT288X=y
> # CONFIG_SERIAL_8250_LPSS is not set
> # CONFIG_SERIAL_8250_MID is not set
> # CONFIG_SERIAL_8250_MOXA is not set
>
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_UARTLITE is not set
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_SERIAL_SCCNXP=y
> CONFIG_SERIAL_SCCNXP_CONSOLE=y
> # CONFIG_SERIAL_SC16IS7XX is not set
> # CONFIG_SERIAL_ALTERA_JTAGUART is not set
> # CONFIG_SERIAL_ALTERA_UART is not set
> # CONFIG_SERIAL_ARC is not set
> # CONFIG_SERIAL_RP2 is not set
> # CONFIG_SERIAL_FSL_LPUART is not set
> CONFIG_SERIAL_DEV_BUS=y
> CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
> CONFIG_HVC_DRIVER=y
> CONFIG_VIRTIO_CONSOLE=m
> # CONFIG_IPMI_HANDLER is not set
> CONFIG_HW_RANDOM=y
> # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> # CONFIG_HW_RANDOM_INTEL is not set
> # CONFIG_HW_RANDOM_AMD is not set
> # CONFIG_HW_RANDOM_VIA is not set
> # CONFIG_HW_RANDOM_VIRTIO is not set
> # CONFIG_NVRAM is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> CONFIG_HPET=y
> CONFIG_HPET_MMAP=y
> CONFIG_HPET_MMAP_DEFAULT=y
> # CONFIG_HANGCHECK_TIMER is not set
> CONFIG_TCG_TPM=y
> # CONFIG_HW_RANDOM_TPM is not set
> CONFIG_TCG_TIS_CORE=y
> CONFIG_TCG_TIS=y
> # CONFIG_TCG_TIS_I2C_ATMEL is not set
> # CONFIG_TCG_TIS_I2C_INFINEON is not set
> # CONFIG_TCG_TIS_I2C_NUVOTON is not set
> # CONFIG_TCG_NSC is not set
> # CONFIG_TCG_ATMEL is not set
> # CONFIG_TCG_INFINEON is not set
> CONFIG_TCG_CRB=y
> # CONFIG_TCG_VTPM_PROXY is not set
> # CONFIG_TCG_TIS_ST33ZP24_I2C is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=y
> # CONFIG_XILLYBUS is not set
> # CONFIG_RANDOM_TRUST_CPU is not set
>
> #
> # I2C support
> #
> CONFIG_I2C=y
> CONFIG_ACPI_I2C_OPREGION=y
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_COMPAT=y
> CONFIG_I2C_CHARDEV=y
> # CONFIG_I2C_MUX is not set
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_ALGOBIT=m
>
> #
> # I2C Hardware Bus support
> #
>
> #
> # PC SMBus host controller drivers
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> # CONFIG_I2C_I801 is not set
> # CONFIG_I2C_ISCH is not set
> # CONFIG_I2C_ISMT is not set
> CONFIG_I2C_PIIX4=m
> # CONFIG_I2C_CHT_WC is not set
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_NVIDIA_GPU is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
>
> #
> # ACPI drivers
> #
> # CONFIG_I2C_SCMI is not set
>
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> # CONFIG_I2C_CBUS_GPIO is not set
> CONFIG_I2C_DESIGNWARE_CORE=y
> CONFIG_I2C_DESIGNWARE_PLATFORM=y
> # CONFIG_I2C_DESIGNWARE_SLAVE is not set
> # CONFIG_I2C_DESIGNWARE_PCI is not set
> # CONFIG_I2C_EMEV2 is not set
> # CONFIG_I2C_GPIO is not set
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_PCA_PLATFORM is not set
> # CONFIG_I2C_SIMTEC is not set
> # CONFIG_I2C_XILINX is not set
>
> #
> # External I2C/SMBus adapter drivers
> #
> # CONFIG_I2C_DIOLAN_U2C is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_ROBOTFUZZ_OSIF is not set
> # CONFIG_I2C_TAOS_EVM is not set
> # CONFIG_I2C_TINY_USB is not set
>
> #
> # Other I2C/SMBus bus drivers
> #
> # CONFIG_I2C_MLXCPLD is not set
> # CONFIG_I2C_STUB is not set
> # CONFIG_I2C_SLAVE is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I3C is not set
> # CONFIG_SPI is not set
> # CONFIG_SPMI is not set
> # CONFIG_HSI is not set
> # CONFIG_PPS is not set
>
> #
> # PTP clock support
> #
> # CONFIG_PTP_1588_CLOCK is not set
>
> #
> # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
> #
> CONFIG_PINCTRL=y
> CONFIG_PINMUX=y
> CONFIG_PINCONF=y
> CONFIG_GENERIC_PINCONF=y
> # CONFIG_DEBUG_PINCTRL is not set
> # CONFIG_PINCTRL_AMD is not set
> # CONFIG_PINCTRL_MCP23S08 is not set
> # CONFIG_PINCTRL_SX150X is not set
> CONFIG_PINCTRL_BAYTRAIL=y
> CONFIG_PINCTRL_CHERRYVIEW=y
> CONFIG_PINCTRL_INTEL=y
> # CONFIG_PINCTRL_BROXTON is not set
> CONFIG_PINCTRL_CANNONLAKE=y
> # CONFIG_PINCTRL_CEDARFORK is not set
> # CONFIG_PINCTRL_DENVERTON is not set
> # CONFIG_PINCTRL_GEMINILAKE is not set
> # CONFIG_PINCTRL_ICELAKE is not set
> # CONFIG_PINCTRL_LEWISBURG is not set
> # CONFIG_PINCTRL_SUNRISEPOINT is not set
> CONFIG_GPIOLIB=y
> CONFIG_GPIOLIB_FASTPATH_LIMIT=512
> CONFIG_GPIO_ACPI=y
> CONFIG_GPIOLIB_IRQCHIP=y
> # CONFIG_DEBUG_GPIO is not set
> CONFIG_GPIO_SYSFS=y
>
> #
> # Memory mapped GPIO drivers
> #
> # CONFIG_GPIO_AMDPT is not set
> # CONFIG_GPIO_DWAPB is not set
> # CONFIG_GPIO_GENERIC_PLATFORM is not set
> # CONFIG_GPIO_ICH is not set
> CONFIG_GPIO_LYNXPOINT=y
> # CONFIG_GPIO_MB86S7X is not set
> # CONFIG_GPIO_MOCKUP is not set
> # CONFIG_GPIO_VX855 is not set
>
> #
> # Port-mapped I/O GPIO drivers
> #
> # CONFIG_GPIO_F7188X is not set
> # CONFIG_GPIO_IT87 is not set
> # CONFIG_GPIO_SCH is not set
> # CONFIG_GPIO_SCH311X is not set
> # CONFIG_GPIO_WINBOND is not set
> # CONFIG_GPIO_WS16C48 is not set
>
> #
> # I2C GPIO expanders
> #
> # CONFIG_GPIO_ADP5588 is not set
> # CONFIG_GPIO_MAX7300 is not set
> # CONFIG_GPIO_MAX732X is not set
> # CONFIG_GPIO_PCA953X is not set
> # CONFIG_GPIO_PCF857X is not set
> # CONFIG_GPIO_TPIC2810 is not set
>
> #
> # MFD GPIO expanders
> #
> # CONFIG_GPIO_ADP5520 is not set
> # CONFIG_GPIO_CRYSTAL_COVE is not set
> # CONFIG_GPIO_DA9052 is not set
> # CONFIG_GPIO_DA9055 is not set
> CONFIG_GPIO_PALMAS=y
> CONFIG_GPIO_RC5T583=y
> CONFIG_GPIO_TPS6586X=y
> CONFIG_GPIO_TPS65910=y
> # CONFIG_GPIO_TPS65912 is not set
> CONFIG_GPIO_TPS68470=y
> # CONFIG_GPIO_TWL4030 is not set
> # CONFIG_GPIO_TWL6040 is not set
> # CONFIG_GPIO_WM831X is not set
> # CONFIG_GPIO_WM8350 is not set
>
> #
> # PCI GPIO expanders
> #
> # CONFIG_GPIO_AMD8111 is not set
> # CONFIG_GPIO_BT8XX is not set
> # CONFIG_GPIO_ML_IOH is not set
> # CONFIG_GPIO_PCI_IDIO_16 is not set
> # CONFIG_GPIO_PCIE_IDIO_24 is not set
> # CONFIG_GPIO_RDC321X is not set
>
> #
> # USB GPIO expanders
> #
> # CONFIG_W1 is not set
> # CONFIG_POWER_AVS is not set
> # CONFIG_POWER_RESET is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_MAX8925_POWER is not set
> # CONFIG_WM831X_BACKUP is not set
> # CONFIG_WM831X_POWER is not set
> # CONFIG_WM8350_POWER is not set
> # CONFIG_TEST_POWER is not set
> # CONFIG_BATTERY_88PM860X is not set
> # CONFIG_CHARGER_ADP5061 is not set
> # CONFIG_BATTERY_DS2780 is not set
> # CONFIG_BATTERY_DS2781 is not set
> # CONFIG_BATTERY_DS2782 is not set
> # CONFIG_BATTERY_SBS is not set
> # CONFIG_CHARGER_SBS is not set
> # CONFIG_BATTERY_BQ27XXX is not set
> # CONFIG_BATTERY_DA9030 is not set
> # CONFIG_BATTERY_DA9052 is not set
> # CONFIG_BATTERY_MAX17040 is not set
> # CONFIG_BATTERY_MAX17042 is not set
> # CONFIG_CHARGER_MAX8903 is not set
> # CONFIG_CHARGER_LP8727 is not set
> # CONFIG_CHARGER_GPIO is not set
> # CONFIG_CHARGER_LTC3651 is not set
> # CONFIG_CHARGER_MAX14577 is not set
> # CONFIG_CHARGER_MAX77693 is not set
> # CONFIG_CHARGER_BQ2415X is not set
> # CONFIG_CHARGER_BQ24257 is not set
> # CONFIG_CHARGER_BQ24735 is not set
> # CONFIG_CHARGER_BQ25890 is not set
> # CONFIG_CHARGER_SMB347 is not set
> # CONFIG_CHARGER_TPS65090 is not set
> # CONFIG_BATTERY_GAUGE_LTC2941 is not set
> # CONFIG_CHARGER_RT9455 is not set
> # CONFIG_HWMON is not set
> CONFIG_THERMAL=y
> # CONFIG_THERMAL_STATISTICS is not set
> CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
> CONFIG_THERMAL_WRITABLE_TRIPS=y
> CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
> # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
> # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
> # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
> CONFIG_THERMAL_GOV_FAIR_SHARE=y
> CONFIG_THERMAL_GOV_STEP_WISE=y
> CONFIG_THERMAL_GOV_BANG_BANG=y
> CONFIG_THERMAL_GOV_USER_SPACE=y
> CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
> CONFIG_THERMAL_EMULATION=y
>
> #
> # Intel thermal drivers
> #
> # CONFIG_INTEL_POWERCLAMP is not set
> # CONFIG_X86_PKG_TEMP_THERMAL is not set
> # CONFIG_INTEL_SOC_DTS_THERMAL is not set
>
> #
> # ACPI INT340X thermal drivers
> #
> # CONFIG_INT340X_THERMAL is not set
> # CONFIG_INTEL_PCH_THERMAL is not set
> # CONFIG_WATCHDOG is not set
> CONFIG_SSB_POSSIBLE=y
> # CONFIG_SSB is not set
> CONFIG_BCMA_POSSIBLE=y
> # CONFIG_BCMA is not set
>
> #
> # Multifunction device drivers
> #
> CONFIG_MFD_CORE=y
> CONFIG_MFD_AS3711=y
> CONFIG_PMIC_ADP5520=y
> CONFIG_MFD_AAT2870_CORE=y
> # CONFIG_MFD_BCM590XX is not set
> # CONFIG_MFD_BD9571MWV is not set
> # CONFIG_MFD_AXP20X_I2C is not set
> # CONFIG_MFD_CROS_EC is not set
> # CONFIG_MFD_MADERA is not set
> CONFIG_PMIC_DA903X=y
> CONFIG_PMIC_DA9052=y
> CONFIG_MFD_DA9052_I2C=y
> CONFIG_MFD_DA9055=y
> # CONFIG_MFD_DA9062 is not set
> CONFIG_MFD_DA9063=y
> # CONFIG_MFD_DA9150 is not set
> # CONFIG_MFD_DLN2 is not set
> # CONFIG_MFD_MC13XXX_I2C is not set
> # CONFIG_HTC_PASIC3 is not set
> CONFIG_HTC_I2CPLD=y
> # CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
> # CONFIG_LPC_ICH is not set
> # CONFIG_LPC_SCH is not set
> CONFIG_INTEL_SOC_PMIC=y
> CONFIG_INTEL_SOC_PMIC_CHTWC=y
> # CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
> # CONFIG_MFD_INTEL_LPSS_ACPI is not set
> # CONFIG_MFD_INTEL_LPSS_PCI is not set
> # CONFIG_MFD_JANZ_CMODIO is not set
> # CONFIG_MFD_KEMPLD is not set
> # CONFIG_MFD_88PM800 is not set
> # CONFIG_MFD_88PM805 is not set
> CONFIG_MFD_88PM860X=y
> CONFIG_MFD_MAX14577=y
> CONFIG_MFD_MAX77693=y
> CONFIG_MFD_MAX77843=y
> # CONFIG_MFD_MAX8907 is not set
> CONFIG_MFD_MAX8925=y
> CONFIG_MFD_MAX8997=y
> CONFIG_MFD_MAX8998=y
> # CONFIG_MFD_MT6397 is not set
> # CONFIG_MFD_MENF21BMC is not set
> # CONFIG_MFD_VIPERBOARD is not set
> # CONFIG_MFD_RETU is not set
> # CONFIG_MFD_PCF50633 is not set
> # CONFIG_MFD_RDC321X is not set
> # CONFIG_MFD_RT5033 is not set
> CONFIG_MFD_RC5T583=y
> CONFIG_MFD_SEC_CORE=y
> # CONFIG_MFD_SI476X_CORE is not set
> # CONFIG_MFD_SM501 is not set
> # CONFIG_MFD_SKY81452 is not set
> CONFIG_MFD_SMSC=y
> CONFIG_ABX500_CORE=y
> CONFIG_AB3100_CORE=y
> # CONFIG_AB3100_OTP is not set
> CONFIG_MFD_SYSCON=y
> # CONFIG_MFD_TI_AM335X_TSCADC is not set
> # CONFIG_MFD_LP3943 is not set
> CONFIG_MFD_LP8788=y
> # CONFIG_MFD_TI_LMU is not set
> CONFIG_MFD_PALMAS=y
> # CONFIG_TPS6105X is not set
> # CONFIG_TPS65010 is not set
> # CONFIG_TPS6507X is not set
> # CONFIG_MFD_TPS65086 is not set
> CONFIG_MFD_TPS65090=y
> CONFIG_MFD_TPS68470=y
> # CONFIG_MFD_TI_LP873X is not set
> CONFIG_MFD_TPS6586X=y
> CONFIG_MFD_TPS65910=y
> CONFIG_MFD_TPS65912=y
> CONFIG_MFD_TPS65912_I2C=y
> CONFIG_MFD_TPS80031=y
> CONFIG_TWL4030_CORE=y
> CONFIG_MFD_TWL4030_AUDIO=y
> CONFIG_TWL6040_CORE=y
> # CONFIG_MFD_WL1273_CORE is not set
> # CONFIG_MFD_LM3533 is not set
> # CONFIG_MFD_VX855 is not set
> # CONFIG_MFD_ARIZONA_I2C is not set
> CONFIG_MFD_WM8400=y
> CONFIG_MFD_WM831X=y
> CONFIG_MFD_WM831X_I2C=y
> CONFIG_MFD_WM8350=y
> CONFIG_MFD_WM8350_I2C=y
> # CONFIG_MFD_WM8994 is not set
> # CONFIG_RAVE_SP_CORE is not set
> # CONFIG_REGULATOR is not set
> # CONFIG_RC_CORE is not set
> # CONFIG_MEDIA_SUPPORT is not set
>
> #
> # Graphics support
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_SIS is not set
> CONFIG_AGP_VIA=y
> CONFIG_INTEL_GTT=y
> CONFIG_VGA_ARB=y
> CONFIG_VGA_ARB_MAX_GPUS=16
> CONFIG_VGA_SWITCHEROO=y
> CONFIG_DRM=m
> CONFIG_DRM_DP_AUX_CHARDEV=y
> # CONFIG_DRM_DEBUG_SELFTEST is not set
> CONFIG_DRM_KMS_HELPER=m
> CONFIG_DRM_KMS_FB_HELPER=y
> CONFIG_DRM_FBDEV_EMULATION=y
> CONFIG_DRM_FBDEV_OVERALLOC=100
> CONFIG_DRM_LOAD_EDID_FIRMWARE=y
> # CONFIG_DRM_DP_CEC is not set
> CONFIG_DRM_TTM=m
>
> #
> # I2C encoder or helper chips
> #
> # CONFIG_DRM_I2C_CH7006 is not set
> # CONFIG_DRM_I2C_SIL164 is not set
> # CONFIG_DRM_I2C_NXP_TDA998X is not set
> # CONFIG_DRM_I2C_NXP_TDA9950 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_AMDGPU is not set
>
> #
> # ACP (Audio CoProcessor) Configuration
> #
>
> #
> # AMD Library routines
> #
> # CONFIG_DRM_NOUVEAU is not set
> # CONFIG_DRM_I915 is not set
> # CONFIG_DRM_VGEM is not set
> # CONFIG_DRM_VKMS is not set
> # CONFIG_DRM_VMWGFX is not set
> # CONFIG_DRM_GMA500 is not set
> # CONFIG_DRM_UDL is not set
> # CONFIG_DRM_AST is not set
> # CONFIG_DRM_MGAG200 is not set
> # CONFIG_DRM_CIRRUS_QEMU is not set
> CONFIG_DRM_QXL=m
> # CONFIG_DRM_BOCHS is not set
> # CONFIG_DRM_VIRTIO_GPU is not set
> CONFIG_DRM_PANEL=y
>
> #
> # Display Panels
> #
> CONFIG_DRM_BRIDGE=y
> CONFIG_DRM_PANEL_BRIDGE=y
>
> #
> # Display Interface Bridges
> #
> # CONFIG_DRM_ANALOGIX_ANX78XX is not set
> # CONFIG_DRM_HISI_HIBMC is not set
> # CONFIG_DRM_TINYDRM is not set
> # CONFIG_DRM_LEGACY is not set
> CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
>
> #
> # Frame buffer Devices
> #
> CONFIG_FB_CMDLINE=y
> CONFIG_FB_NOTIFY=y
> CONFIG_FB=y
> CONFIG_FIRMWARE_EDID=y
> CONFIG_FB_BOOT_VESA_SUPPORT=y
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> CONFIG_FB_SYS_FILLRECT=m
> CONFIG_FB_SYS_COPYAREA=m
> CONFIG_FB_SYS_IMAGEBLIT=m
> # CONFIG_FB_FOREIGN_ENDIAN is not set
> CONFIG_FB_SYS_FOPS=m
> CONFIG_FB_DEFERRED_IO=y
> CONFIG_FB_MODE_HELPERS=y
> CONFIG_FB_TILEBLITTING=y
>
> #
> # Frame buffer hardware drivers
> #
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ARC is not set
> CONFIG_FB_ASILIANT=y
> CONFIG_FB_IMSTT=y
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_UVESA is not set
> CONFIG_FB_VESA=y
> CONFIG_FB_EFI=y
> # CONFIG_FB_N411 is not set
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_OPENCORES is not set
> # CONFIG_FB_S1D13XXX is not set
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_I740 is not set
> # CONFIG_FB_LE80578 is not set
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_S3 is not set
> # CONFIG_FB_SAVAGE is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_VIA is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_VT8623 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_ARK is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_CARMINE is not set
> # CONFIG_FB_SMSCUFX is not set
> # CONFIG_FB_UDL is not set
> # CONFIG_FB_IBM_GXT4500 is not set
> # CONFIG_FB_VIRTUAL is not set
> # CONFIG_FB_METRONOME is not set
> # CONFIG_FB_MB862XX is not set
> CONFIG_FB_SIMPLE=y
> # CONFIG_FB_SM712 is not set
> # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
> CONFIG_HDMI=y
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_VGACON_SOFT_SCROLLBACK is not set
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_DUMMY_CONSOLE_COLUMNS=80
> CONFIG_DUMMY_CONSOLE_ROWS=25
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
> # CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
> # CONFIG_LOGO is not set
> # CONFIG_SOUND is not set
>
> #
> # HID support
> #
> CONFIG_HID=m
> CONFIG_HID_BATTERY_STRENGTH=y
> CONFIG_HIDRAW=y
> # CONFIG_UHID is not set
> CONFIG_HID_GENERIC=m
>
> #
> # Special HID drivers
> #
> # CONFIG_HID_A4TECH is not set
> # CONFIG_HID_ACCUTOUCH is not set
> # CONFIG_HID_ACRUX is not set
> # CONFIG_HID_APPLE is not set
> # CONFIG_HID_APPLEIR is not set
> # CONFIG_HID_AUREAL is not set
> # CONFIG_HID_BELKIN is not set
> # CONFIG_HID_BETOP_FF is not set
> # CONFIG_HID_CHERRY is not set
> # CONFIG_HID_CHICONY is not set
> # CONFIG_HID_COUGAR is not set
> # CONFIG_HID_CMEDIA is not set
> # CONFIG_HID_CP2112 is not set
> # CONFIG_HID_CYPRESS is not set
> # CONFIG_HID_DRAGONRISE is not set
> # CONFIG_HID_EMS_FF is not set
> # CONFIG_HID_ELECOM is not set
> # CONFIG_HID_ELO is not set
> # CONFIG_HID_EZKEY is not set
> # CONFIG_HID_GEMBIRD is not set
> # CONFIG_HID_GFRM is not set
> # CONFIG_HID_HOLTEK is not set
> # CONFIG_HID_KEYTOUCH is not set
> # CONFIG_HID_KYE is not set
> # CONFIG_HID_UCLOGIC is not set
> # CONFIG_HID_WALTOP is not set
> # CONFIG_HID_GYRATION is not set
> # CONFIG_HID_ICADE is not set
> # CONFIG_HID_ITE is not set
> # CONFIG_HID_JABRA is not set
> # CONFIG_HID_TWINHAN is not set
> # CONFIG_HID_KENSINGTON is not set
> # CONFIG_HID_LCPOWER is not set
> # CONFIG_HID_LENOVO is not set
> # CONFIG_HID_LOGITECH is not set
> # CONFIG_HID_MAGICMOUSE is not set
> # CONFIG_HID_MAYFLASH is not set
> # CONFIG_HID_REDRAGON is not set
> # CONFIG_HID_MICROSOFT is not set
> # CONFIG_HID_MONTEREY is not set
> # CONFIG_HID_MULTITOUCH is not set
> # CONFIG_HID_NTI is not set
> # CONFIG_HID_NTRIG is not set
> # CONFIG_HID_ORTEK is not set
> # CONFIG_HID_PANTHERLORD is not set
> # CONFIG_HID_PENMOUNT is not set
> # CONFIG_HID_PETALYNX is not set
> # CONFIG_HID_PICOLCD is not set
> # CONFIG_HID_PLANTRONICS is not set
> # CONFIG_HID_PRIMAX is not set
> # CONFIG_HID_RETRODE is not set
> # CONFIG_HID_ROCCAT is not set
> # CONFIG_HID_SAITEK is not set
> # CONFIG_HID_SAMSUNG is not set
> # CONFIG_HID_SPEEDLINK is not set
> # CONFIG_HID_STEAM is not set
> # CONFIG_HID_STEELSERIES is not set
> # CONFIG_HID_SUNPLUS is not set
> # CONFIG_HID_RMI is not set
> # CONFIG_HID_GREENASIA is not set
> # CONFIG_HID_SMARTJOYPLUS is not set
> # CONFIG_HID_TIVO is not set
> # CONFIG_HID_TOPSEED is not set
> # CONFIG_HID_THRUSTMASTER is not set
> # CONFIG_HID_UDRAW_PS3 is not set
> # CONFIG_HID_WACOM is not set
> # CONFIG_HID_XINMO is not set
> # CONFIG_HID_ZEROPLUS is not set
> # CONFIG_HID_ZYDACRON is not set
> # CONFIG_HID_SENSOR_HUB is not set
> # CONFIG_HID_ALPS is not set
>
> #
> # USB HID support
> #
> CONFIG_USB_HID=m
> CONFIG_HID_PID=y
> CONFIG_USB_HIDDEV=y
>
> #
> # I2C HID support
> #
> # CONFIG_I2C_HID is not set
>
> #
> # Intel ISH HID support
> #
> # CONFIG_INTEL_ISH_HID is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_COMMON=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB=y
> CONFIG_USB_PCI=y
> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEFAULT_PERSIST=y
> CONFIG_USB_DYNAMIC_MINORS=y
> # CONFIG_USB_OTG is not set
> # CONFIG_USB_OTG_WHITELIST is not set
> # CONFIG_USB_MON is not set
> # CONFIG_USB_WUSB_CBAF is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DBGCAP=y
> CONFIG_USB_XHCI_PCI=y
> # CONFIG_USB_XHCI_PLATFORM is not set
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> CONFIG_USB_EHCI_PCI=y
> CONFIG_USB_EHCI_HCD_PLATFORM=y
> # CONFIG_USB_OXU210HP_HCD is not set
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_FOTG210_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_HCD_PCI=y
> CONFIG_USB_OHCI_HCD_PLATFORM=y
> CONFIG_USB_UHCI_HCD=y
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
> # CONFIG_USB_HCD_TEST_MODE is not set
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> # CONFIG_USB_WDM is not set
> # CONFIG_USB_TMC is not set
>
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
>
> #
> # also be needed; see USB_STORAGE Help for more info
> #
> # CONFIG_USB_STORAGE is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USBIP_CORE is not set
> # CONFIG_USB_MUSB_HDRC is not set
> # CONFIG_USB_DWC3 is not set
> CONFIG_USB_DWC2=y
> CONFIG_USB_DWC2_HOST=y
>
> #
> # Gadget/Dual-role mode requires USB Gadget support to be enabled
> #
> # CONFIG_USB_DWC2_PCI is not set
> # CONFIG_USB_DWC2_DEBUG is not set
> # CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
> # CONFIG_USB_CHIPIDEA is not set
> # CONFIG_USB_ISP1760 is not set
>
> #
> # USB port drivers
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_SEVSEG is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_EHSET_TEST_FIXTURE is not set
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_YUREX is not set
> # CONFIG_USB_EZUSB_FX2 is not set
> # CONFIG_USB_HUB_USB251XB is not set
> # CONFIG_USB_HSIC_USB3503 is not set
> # CONFIG_USB_HSIC_USB4604 is not set
> # CONFIG_USB_LINK_LAYER_TEST is not set
> # CONFIG_USB_CHAOSKEY is not set
>
> #
> # USB Physical Layer drivers
> #
> # CONFIG_NOP_USB_XCEIV is not set
> # CONFIG_USB_GPIO_VBUS is not set
> # CONFIG_USB_ISP1301 is not set
> # CONFIG_USB_GADGET is not set
> # CONFIG_TYPEC is not set
> # CONFIG_USB_ROLE_SWITCH is not set
> # CONFIG_USB_ULPI_BUS is not set
> # CONFIG_UWB is not set
> # CONFIG_MMC is not set
> # CONFIG_MEMSTICK is not set
> # CONFIG_NEW_LEDS is not set
> # CONFIG_ACCESSIBILITY is not set
> CONFIG_INFINIBAND=m
> CONFIG_INFINIBAND_USER_MAD=m
> CONFIG_INFINIBAND_USER_ACCESS=m
> # CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set
> CONFIG_INFINIBAND_USER_MEM=y
> CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
> CONFIG_INFINIBAND_ADDR_TRANS=y
> CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
> # CONFIG_INFINIBAND_MTHCA is not set
> # CONFIG_INFINIBAND_QIB is not set
> # CONFIG_MLX4_INFINIBAND is not set
> # CONFIG_INFINIBAND_NES is not set
> # CONFIG_INFINIBAND_OCRDMA is not set
> # CONFIG_INFINIBAND_USNIC is not set
> # CONFIG_INFINIBAND_BNXT_RE is not set
> # CONFIG_INFINIBAND_HFI1 is not set
> CONFIG_INFINIBAND_RDMAVT=m
> CONFIG_RDMA_RXE=m
> CONFIG_INFINIBAND_IPOIB=m
> CONFIG_INFINIBAND_IPOIB_CM=y
> CONFIG_INFINIBAND_IPOIB_DEBUG=y
> # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
> CONFIG_INFINIBAND_SRP=m
> CONFIG_INFINIBAND_SRPT=m
> # CONFIG_INFINIBAND_ISER is not set
> # CONFIG_INFINIBAND_ISERT is not set
> # CONFIG_INFINIBAND_OPA_VNIC is not set
> CONFIG_EDAC_ATOMIC_SCRUB=y
> CONFIG_EDAC_SUPPORT=y
> # CONFIG_EDAC is not set
> CONFIG_RTC_LIB=y
> CONFIG_RTC_MC146818_LIB=y
> # CONFIG_RTC_CLASS is not set
> # CONFIG_DMADEVICES is not set
>
> #
> # DMABUF options
> #
> CONFIG_SYNC_FILE=y
> CONFIG_SW_SYNC=y
> # CONFIG_UDMABUF is not set
> # CONFIG_AUXDISPLAY is not set
> # CONFIG_UIO is not set
> # CONFIG_VFIO is not set
> CONFIG_VIRT_DRIVERS=y
> # CONFIG_VBOXGUEST is not set
> CONFIG_VIRTIO=y
> CONFIG_VIRTIO_MENU=y
> CONFIG_VIRTIO_PCI=y
> CONFIG_VIRTIO_PCI_LEGACY=y
> CONFIG_VIRTIO_BALLOON=m
> CONFIG_VIRTIO_INPUT=m
> CONFIG_VIRTIO_MMIO=y
> CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
>
> #
> # Microsoft Hyper-V guest support
> #
> # CONFIG_STAGING is not set
> CONFIG_X86_PLATFORM_DEVICES=y
> # CONFIG_ACER_WIRELESS is not set
> # CONFIG_ACERHDF is not set
> # CONFIG_DCDBAS is not set
> # CONFIG_DELL_SMBIOS is not set
> # CONFIG_DELL_SMO8800 is not set
> # CONFIG_DELL_RBTN is not set
> # CONFIG_DELL_RBU is not set
> # CONFIG_FUJITSU_TABLET is not set
> # CONFIG_AMILO_RFKILL is not set
> # CONFIG_GPD_POCKET_FAN is not set
> # CONFIG_HP_ACCEL is not set
> # CONFIG_HP_WIRELESS is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_INTEL_MENLOW is not set
> # CONFIG_ASUS_WIRELESS is not set
> # CONFIG_ACPI_WMI is not set
> # CONFIG_TOPSTAR_LAPTOP is not set
> # CONFIG_TOSHIBA_BT_RFKILL is not set
> # CONFIG_TOSHIBA_HAPS is not set
> # CONFIG_INTEL_INT0002_VGPIO is not set
> # CONFIG_INTEL_HID_EVENT is not set
> # CONFIG_INTEL_VBTN is not set
> # CONFIG_INTEL_IPS is not set
> CONFIG_INTEL_PMC_CORE=y
> # CONFIG_IBM_RTL is not set
> # CONFIG_INTEL_RST is not set
> # CONFIG_INTEL_SMARTCONNECT is not set
> # CONFIG_INTEL_PMC_IPC is not set
> # CONFIG_SURFACE_PRO3_BUTTON is not set
> # CONFIG_INTEL_PUNIT_IPC is not set
> # CONFIG_MLX_PLATFORM is not set
> CONFIG_INTEL_TURBO_MAX_3=y
> # CONFIG_I2C_MULTI_INSTANTIATE is not set
> CONFIG_PMC_ATOM=y
> # CONFIG_CHROME_PLATFORMS is not set
> # CONFIG_MELLANOX_PLATFORM is not set
> CONFIG_CLKDEV_LOOKUP=y
> CONFIG_HAVE_CLK_PREPARE=y
> CONFIG_COMMON_CLK=y
>
> #
> # Common Clock Framework
> #
> # CONFIG_COMMON_CLK_WM831X is not set
> # CONFIG_COMMON_CLK_MAX9485 is not set
> # CONFIG_COMMON_CLK_SI5351 is not set
> # CONFIG_COMMON_CLK_SI544 is not set
> # CONFIG_COMMON_CLK_CDCE706 is not set
> # CONFIG_COMMON_CLK_CS2000_CP is not set
> # CONFIG_COMMON_CLK_S2MPS11 is not set
> # CONFIG_CLK_TWL6040 is not set
> # CONFIG_COMMON_CLK_PALMAS is not set
> CONFIG_HWSPINLOCK=y
>
> #
> # Clock Source drivers
> #
> CONFIG_CLKEVT_I8253=y
> CONFIG_I8253_LOCK=y
> CONFIG_CLKBLD_I8253=y
> CONFIG_MAILBOX=y
> CONFIG_PCC=y
> # CONFIG_ALTERA_MBOX is not set
> CONFIG_IOMMU_API=y
> CONFIG_IOMMU_SUPPORT=y
>
> #
> # Generic IOMMU Pagetable Support
> #
> # CONFIG_IOMMU_DEBUGFS is not set
> # CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
> CONFIG_IOMMU_IOVA=y
> CONFIG_AMD_IOMMU=y
> # CONFIG_AMD_IOMMU_V2 is not set
> CONFIG_DMAR_TABLE=y
> CONFIG_INTEL_IOMMU=y
> CONFIG_INTEL_IOMMU_SVM=y
> # CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
> CONFIG_INTEL_IOMMU_FLOPPY_WA=y
> CONFIG_IRQ_REMAP=y
>
> #
> # Remoteproc drivers
> #
> # CONFIG_REMOTEPROC is not set
>
> #
> # Rpmsg drivers
> #
> # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
> # CONFIG_RPMSG_VIRTIO is not set
> # CONFIG_SOUNDWIRE is not set
>
> #
> # SOC (System On Chip) specific Drivers
> #
>
> #
> # Amlogic SoC drivers
> #
>
> #
> # Broadcom SoC drivers
> #
>
> #
> # NXP/Freescale QorIQ SoC drivers
> #
>
> #
> # i.MX SoC drivers
> #
>
> #
> # Qualcomm SoC drivers
> #
> # CONFIG_SOC_TI is not set
>
> #
> # Xilinx SoC drivers
> #
> # CONFIG_XILINX_VCU is not set
> # CONFIG_PM_DEVFREQ is not set
> # CONFIG_EXTCON is not set
> # CONFIG_MEMORY is not set
> # CONFIG_IIO is not set
> # CONFIG_NTB is not set
> # CONFIG_VME_BUS is not set
> # CONFIG_PWM is not set
>
> #
> # IRQ chip support
> #
> CONFIG_ARM_GIC_MAX_NR=1
> # CONFIG_IPACK_BUS is not set
> CONFIG_RESET_CONTROLLER=y
> # CONFIG_RESET_TI_SYSCON is not set
> # CONFIG_FMC is not set
>
> #
> # PHY Subsystem
> #
> CONFIG_GENERIC_PHY=y
> # CONFIG_BCM_KONA_USB2_PHY is not set
> # CONFIG_PHY_PXA_28NM_HSIC is not set
> # CONFIG_PHY_PXA_28NM_USB2 is not set
> # CONFIG_PHY_SAMSUNG_USB2 is not set
> CONFIG_POWERCAP=y
> # CONFIG_IDLE_INJECT is not set
> # CONFIG_MCB is not set
>
> #
> # Performance monitor support
> #
> CONFIG_RAS=y
> CONFIG_RAS_CEC=y
> # CONFIG_THUNDERBOLT is not set
>
> #
> # Android
> #
> # CONFIG_ANDROID is not set
> CONFIG_LIBNVDIMM=y
> # CONFIG_BLK_DEV_PMEM is not set
> # CONFIG_ND_BLK is not set
> CONFIG_ND_CLAIM=y
> CONFIG_BTT=y
> CONFIG_NVDIMM_PFN=y
> CONFIG_NVDIMM_DAX=y
> CONFIG_NVDIMM_KEYS=y
> CONFIG_DAX=y
> # CONFIG_NVMEM is not set
>
> #
> # HW tracing support
> #
> # CONFIG_STM is not set
> # CONFIG_INTEL_TH is not set
> # CONFIG_FPGA is not set
> # CONFIG_UNISYS_VISORBUS is not set
> # CONFIG_SIOX is not set
> # CONFIG_SLIMBUS is not set
>
> #
> # File systems
> #
> CONFIG_DCACHE_WORD_ACCESS=y
> CONFIG_FS_IOMAP=y
> # CONFIG_EXT2_FS is not set
> # CONFIG_EXT3_FS is not set
> CONFIG_EXT4_FS=y
> CONFIG_EXT4_USE_FOR_EXT2=y
> CONFIG_EXT4_FS_POSIX_ACL=y
> CONFIG_EXT4_FS_SECURITY=y
> CONFIG_EXT4_ENCRYPTION=y
> CONFIG_EXT4_FS_ENCRYPTION=y
> # CONFIG_EXT4_DEBUG is not set
> CONFIG_JBD2=y
> # CONFIG_JBD2_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_XFS_FS=m
> CONFIG_XFS_QUOTA=y
> CONFIG_XFS_POSIX_ACL=y
> # CONFIG_XFS_RT is not set
> CONFIG_XFS_ONLINE_SCRUB=y
> CONFIG_XFS_ONLINE_REPAIR=y
> # CONFIG_XFS_WARN is not set
> # CONFIG_XFS_DEBUG is not set
> # CONFIG_GFS2_FS is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_BTRFS_FS is not set
> # CONFIG_NILFS2_FS is not set
> # CONFIG_F2FS_FS is not set
> CONFIG_FS_DAX=y
> CONFIG_FS_POSIX_ACL=y
> CONFIG_EXPORTFS=y
> CONFIG_EXPORTFS_BLOCK_OPS=y
> CONFIG_FILE_LOCKING=y
> CONFIG_MANDATORY_FILE_LOCKING=y
> CONFIG_FS_ENCRYPTION=y
> CONFIG_FSNOTIFY=y
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY_USER=y
> CONFIG_FANOTIFY=y
> CONFIG_QUOTA=y
> CONFIG_QUOTA_NETLINK_INTERFACE=y
> # CONFIG_PRINT_QUOTA_WARNING is not set
> # CONFIG_QUOTA_DEBUG is not set
> # CONFIG_QFMT_V1 is not set
> # CONFIG_QFMT_V2 is not set
> CONFIG_QUOTACTL=y
> CONFIG_QUOTACTL_COMPAT=y
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_FUSE_FS=y
> # CONFIG_CUSE is not set
> # CONFIG_OVERLAY_FS is not set
>
> #
> # Caches
> #
> # CONFIG_FSCACHE is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> # CONFIG_ISO9660_FS is not set
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> # CONFIG_MSDOS_FS is not set
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> # CONFIG_FAT_DEFAULT_UTF8 is not set
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_PROC_CHILDREN=y
> CONFIG_KERNFS=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_TMPFS_XATTR=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_MEMFD_CREATE=y
> CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
> CONFIG_CONFIGFS_FS=y
> CONFIG_EFIVAR_FS=y
> CONFIG_MISC_FILESYSTEMS=y
> # CONFIG_ORANGEFS_FS is not set
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> CONFIG_ECRYPT_FS=y
> CONFIG_ECRYPT_FS_MESSAGING=y
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> CONFIG_SQUASHFS=y
> # CONFIG_SQUASHFS_FILE_CACHE is not set
> CONFIG_SQUASHFS_FILE_DIRECT=y
> CONFIG_SQUASHFS_DECOMP_SINGLE=y
> # CONFIG_SQUASHFS_DECOMP_MULTI is not set
> # CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
> CONFIG_SQUASHFS_XATTR=y
> CONFIG_SQUASHFS_ZLIB=y
> CONFIG_SQUASHFS_LZ4=y
> CONFIG_SQUASHFS_LZO=y
> CONFIG_SQUASHFS_XZ=y
> CONFIG_SQUASHFS_ZSTD=y
> # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
> # CONFIG_SQUASHFS_EMBEDDED is not set
> CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_OMFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_QNX6FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_PSTORE=y
> CONFIG_PSTORE_DEFLATE_COMPRESS=y
> # CONFIG_PSTORE_LZO_COMPRESS is not set
> # CONFIG_PSTORE_LZ4_COMPRESS is not set
> # CONFIG_PSTORE_LZ4HC_COMPRESS is not set
> # CONFIG_PSTORE_842_COMPRESS is not set
> # CONFIG_PSTORE_ZSTD_COMPRESS is not set
> CONFIG_PSTORE_COMPRESS=y
> CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
> CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
> # CONFIG_PSTORE_CONSOLE is not set
> # CONFIG_PSTORE_PMSG is not set
> # CONFIG_PSTORE_FTRACE is not set
> # CONFIG_PSTORE_RAM is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_NETWORK_FILESYSTEMS is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ASCII is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_MAC_ROMAN is not set
> # CONFIG_NLS_MAC_CELTIC is not set
> # CONFIG_NLS_MAC_CENTEURO is not set
> # CONFIG_NLS_MAC_CROATIAN is not set
> # CONFIG_NLS_MAC_CYRILLIC is not set
> # CONFIG_NLS_MAC_GAELIC is not set
> # CONFIG_NLS_MAC_GREEK is not set
> # CONFIG_NLS_MAC_ICELAND is not set
> # CONFIG_NLS_MAC_INUIT is not set
> # CONFIG_NLS_MAC_ROMANIAN is not set
> # CONFIG_NLS_MAC_TURKISH is not set
> # CONFIG_NLS_UTF8 is not set
> # CONFIG_DLM is not set
>
> #
> # Security options
> #
> CONFIG_KEYS=y
> CONFIG_KEYS_COMPAT=y
> CONFIG_PERSISTENT_KEYRINGS=y
> CONFIG_BIG_KEYS=y
> CONFIG_TRUSTED_KEYS=y
> CONFIG_ENCRYPTED_KEYS=y
> CONFIG_KEY_DH_OPERATIONS=y
> # CONFIG_SECURITY_DMESG_RESTRICT is not set
> # CONFIG_SECURITY is not set
> CONFIG_SECURITYFS=y
> # CONFIG_PAGE_TABLE_ISOLATION is not set
> CONFIG_INTEL_TXT=y
> CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
> CONFIG_HARDENED_USERCOPY=y
> CONFIG_HARDENED_USERCOPY_FALLBACK=y
> # CONFIG_FORTIFY_SOURCE is not set
> # CONFIG_STATIC_USERMODEHELPER is not set
> CONFIG_DEFAULT_SECURITY_DAC=y
> CONFIG_DEFAULT_SECURITY=""
> CONFIG_CRYPTO=y
>
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD=y
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_BLKCIPHER=y
> CONFIG_CRYPTO_BLKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG=y
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_RNG_DEFAULT=y
> CONFIG_CRYPTO_AKCIPHER2=y
> CONFIG_CRYPTO_AKCIPHER=y
> CONFIG_CRYPTO_KPP2=y
> CONFIG_CRYPTO_KPP=y
> CONFIG_CRYPTO_ACOMP2=y
> CONFIG_CRYPTO_RSA=y
> CONFIG_CRYPTO_DH=y
> # CONFIG_CRYPTO_ECDH is not set
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_MANAGER2=y
> # CONFIG_CRYPTO_USER is not set
> CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> CONFIG_CRYPTO_GF128MUL=y
> CONFIG_CRYPTO_NULL=y
> CONFIG_CRYPTO_NULL2=y
> # CONFIG_CRYPTO_PCRYPT is not set
> CONFIG_CRYPTO_WORKQUEUE=y
> CONFIG_CRYPTO_CRYPTD=m
> # CONFIG_CRYPTO_AUTHENC is not set
> # CONFIG_CRYPTO_TEST is not set
> CONFIG_CRYPTO_SIMD=m
> CONFIG_CRYPTO_GLUE_HELPER_X86=m
>
> #
> # Authenticated Encryption with Associated Data
> #
> # CONFIG_CRYPTO_CCM is not set
> CONFIG_CRYPTO_GCM=y
> # CONFIG_CRYPTO_CHACHA20POLY1305 is not set
> # CONFIG_CRYPTO_AEGIS128 is not set
> # CONFIG_CRYPTO_AEGIS128L is not set
> # CONFIG_CRYPTO_AEGIS256 is not set
> # CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
> # CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
> # CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set
> # CONFIG_CRYPTO_MORUS640 is not set
> # CONFIG_CRYPTO_MORUS640_SSE2 is not set
> # CONFIG_CRYPTO_MORUS1280 is not set
> # CONFIG_CRYPTO_MORUS1280_SSE2 is not set
> # CONFIG_CRYPTO_MORUS1280_AVX2 is not set
> CONFIG_CRYPTO_SEQIV=y
> # CONFIG_CRYPTO_ECHAINIV is not set
>
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=y
> # CONFIG_CRYPTO_CFB is not set
> CONFIG_CRYPTO_CTR=y
> CONFIG_CRYPTO_CTS=y
> CONFIG_CRYPTO_ECB=y
> # CONFIG_CRYPTO_LRW is not set
> # CONFIG_CRYPTO_OFB is not set
> CONFIG_CRYPTO_PCBC=m
> CONFIG_CRYPTO_XTS=y
> # CONFIG_CRYPTO_KEYWRAP is not set
> # CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
> # CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
> # CONFIG_CRYPTO_ADIANTUM is not set
>
> #
> # Hash modes
> #
> # CONFIG_CRYPTO_CMAC is not set
> CONFIG_CRYPTO_HMAC=y
> # CONFIG_CRYPTO_XCBC is not set
> # CONFIG_CRYPTO_VMAC is not set
>
> #
> # Digest
> #
> CONFIG_CRYPTO_CRC32C=y
> CONFIG_CRYPTO_CRC32C_INTEL=y
> CONFIG_CRYPTO_CRC32=m
> CONFIG_CRYPTO_CRC32_PCLMUL=m
> CONFIG_CRYPTO_CRCT10DIF=y
> CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
> CONFIG_CRYPTO_GHASH=y
> # CONFIG_CRYPTO_POLY1305 is not set
> # CONFIG_CRYPTO_POLY1305_X86_64 is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> # CONFIG_CRYPTO_RMD128 is not set
> # CONFIG_CRYPTO_RMD160 is not set
> # CONFIG_CRYPTO_RMD256 is not set
> # CONFIG_CRYPTO_RMD320 is not set
> CONFIG_CRYPTO_SHA1=y
> # CONFIG_CRYPTO_SHA1_SSSE3 is not set
> # CONFIG_CRYPTO_SHA256_SSSE3 is not set
> # CONFIG_CRYPTO_SHA512_SSSE3 is not set
> CONFIG_CRYPTO_SHA256=y
> CONFIG_CRYPTO_SHA512=y
> # CONFIG_CRYPTO_SHA3 is not set
> # CONFIG_CRYPTO_SM3 is not set
> # CONFIG_CRYPTO_STREEBOG is not set
> # CONFIG_CRYPTO_TGR192 is not set
> # CONFIG_CRYPTO_WP512 is not set
> CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
>
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=y
> # CONFIG_CRYPTO_AES_TI is not set
> CONFIG_CRYPTO_AES_X86_64=m
> CONFIG_CRYPTO_AES_NI_INTEL=m
> # CONFIG_CRYPTO_ANUBIS is not set
> # CONFIG_CRYPTO_ARC4 is not set
> # CONFIG_CRYPTO_BLOWFISH is not set
> # CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
> # CONFIG_CRYPTO_CAMELLIA is not set
> # CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
> # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
> # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
> # CONFIG_CRYPTO_CAST6 is not set
> # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
> # CONFIG_CRYPTO_DES is not set
> # CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
> # CONFIG_CRYPTO_FCRYPT is not set
> # CONFIG_CRYPTO_KHAZAD is not set
> # CONFIG_CRYPTO_SALSA20 is not set
> # CONFIG_CRYPTO_CHACHA20 is not set
> # CONFIG_CRYPTO_CHACHA20_X86_64 is not set
> # CONFIG_CRYPTO_SEED is not set
> # CONFIG_CRYPTO_SERPENT is not set
> # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
> # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
> # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
> # CONFIG_CRYPTO_SM4 is not set
> # CONFIG_CRYPTO_TEA is not set
> # CONFIG_CRYPTO_TWOFISH is not set
> # CONFIG_CRYPTO_TWOFISH_X86_64 is not set
> # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
> # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
>
> #
> # Compression
> #
> CONFIG_CRYPTO_DEFLATE=y
> CONFIG_CRYPTO_LZO=y
> # CONFIG_CRYPTO_842 is not set
> # CONFIG_CRYPTO_LZ4 is not set
> # CONFIG_CRYPTO_LZ4HC is not set
> # CONFIG_CRYPTO_ZSTD is not set
>
> #
> # Random Number Generation
> #
> # CONFIG_CRYPTO_ANSI_CPRNG is not set
> CONFIG_CRYPTO_DRBG_MENU=y
> CONFIG_CRYPTO_DRBG_HMAC=y
> CONFIG_CRYPTO_DRBG_HASH=y
> CONFIG_CRYPTO_DRBG_CTR=y
> CONFIG_CRYPTO_DRBG=y
> CONFIG_CRYPTO_JITTERENTROPY=y
> # CONFIG_CRYPTO_USER_API_HASH is not set
> # CONFIG_CRYPTO_USER_API_SKCIPHER is not set
> # CONFIG_CRYPTO_USER_API_RNG is not set
> # CONFIG_CRYPTO_USER_API_AEAD is not set
> CONFIG_CRYPTO_HASH_INFO=y
> CONFIG_CRYPTO_HW=y
> CONFIG_CRYPTO_DEV_PADLOCK=y
> # CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
> # CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
> CONFIG_CRYPTO_DEV_CCP=y
> # CONFIG_CRYPTO_DEV_CCP_DD is not set
> # CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
> # CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
> # CONFIG_CRYPTO_DEV_QAT_C62X is not set
> # CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
> # CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
> # CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
> # CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
> # CONFIG_CRYPTO_DEV_VIRTIO is not set
> CONFIG_ASYMMETRIC_KEY_TYPE=y
> CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
> # CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE is not set
> CONFIG_X509_CERTIFICATE_PARSER=y
> # CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
> CONFIG_PKCS7_MESSAGE_PARSER=y
> # CONFIG_PKCS7_TEST_KEY is not set
> CONFIG_SIGNED_PE_FILE_VERIFICATION=y
>
> #
> # Certificates for signature checking
> #
> CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
> CONFIG_SYSTEM_TRUSTED_KEYRING=y
> CONFIG_SYSTEM_TRUSTED_KEYS=""
> CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
> CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
> CONFIG_SECONDARY_TRUSTED_KEYRING=y
> CONFIG_SYSTEM_BLACKLIST_KEYRING=y
> CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
> CONFIG_BINARY_PRINTF=y
>
> #
> # Library routines
> #
> CONFIG_BITREVERSE=y
> CONFIG_RATIONAL=y
> CONFIG_GENERIC_STRNCPY_FROM_USER=y
> CONFIG_GENERIC_STRNLEN_USER=y
> CONFIG_GENERIC_NET_UTILS=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_GENERIC_PCI_IOMAP=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
> CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
> CONFIG_CRC_CCITT=y
> CONFIG_CRC16=y
> CONFIG_CRC_T10DIF=y
> # CONFIG_CRC_ITU_T is not set
> CONFIG_CRC32=y
> # CONFIG_CRC32_SELFTEST is not set
> CONFIG_CRC32_SLICEBY8=y
> # CONFIG_CRC32_SLICEBY4 is not set
> # CONFIG_CRC32_SARWATE is not set
> # CONFIG_CRC32_BIT is not set
> # CONFIG_CRC64 is not set
> # CONFIG_CRC4 is not set
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=m
> # CONFIG_CRC8 is not set
> CONFIG_XXHASH=y
> # CONFIG_RANDOM32_SELFTEST is not set
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
> CONFIG_LZO_COMPRESS=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_LZ4_DECOMPRESS=y
> CONFIG_ZSTD_DECOMPRESS=y
> CONFIG_XZ_DEC=y
> CONFIG_XZ_DEC_X86=y
> CONFIG_XZ_DEC_POWERPC=y
> CONFIG_XZ_DEC_IA64=y
> CONFIG_XZ_DEC_ARM=y
> CONFIG_XZ_DEC_ARMTHUMB=y
> CONFIG_XZ_DEC_SPARC=y
> CONFIG_XZ_DEC_BCJ=y
> # CONFIG_XZ_DEC_TEST is not set
> CONFIG_DECOMPRESS_GZIP=y
> CONFIG_DECOMPRESS_BZIP2=y
> CONFIG_DECOMPRESS_LZMA=y
> CONFIG_DECOMPRESS_XZ=y
> CONFIG_DECOMPRESS_LZO=y
> CONFIG_DECOMPRESS_LZ4=y
> CONFIG_GENERIC_ALLOCATOR=y
> CONFIG_XARRAY_MULTI=y
> CONFIG_ASSOCIATIVE_ARRAY=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT_MAP=y
> CONFIG_HAS_DMA=y
> CONFIG_NEED_SG_DMA_LENGTH=y
> CONFIG_NEED_DMA_MAP_STATE=y
> CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> CONFIG_DMA_VIRT_OPS=y
> CONFIG_SWIOTLB=y
> CONFIG_SGL_ALLOC=y
> # CONFIG_CPUMASK_OFFSTACK is not set
> CONFIG_CPU_RMAP=y
> CONFIG_DQL=y
> CONFIG_GLOB=y
> # CONFIG_GLOB_SELFTEST is not set
> CONFIG_NLATTR=y
> CONFIG_CLZ_TAB=y
> # CONFIG_CORDIC is not set
> CONFIG_DDR=y
> CONFIG_IRQ_POLL=y
> CONFIG_MPILIB=y
> CONFIG_OID_REGISTRY=y
> CONFIG_UCS2_STRING=y
> CONFIG_FONT_SUPPORT=y
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> CONFIG_SG_POOL=y
> CONFIG_ARCH_HAS_PMEM_API=y
> CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
> CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
> CONFIG_STACKDEPOT=y
> CONFIG_SBITMAP=y
> # CONFIG_STRING_SELFTEST is not set
>
> #
> # Kernel hacking
> #
>
> #
> # printk and dmesg options
> #
> CONFIG_PRINTK_TIME=y
> CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
> CONFIG_CONSOLE_LOGLEVEL_QUIET=4
> CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
> CONFIG_BOOT_PRINTK_DELAY=y
> CONFIG_DYNAMIC_DEBUG=y
>
> #
> # Compile-time checks and compiler options
> #
> CONFIG_DEBUG_INFO=y
> CONFIG_DEBUG_INFO_REDUCED=y
> # CONFIG_DEBUG_INFO_SPLIT is not set
> CONFIG_DEBUG_INFO_DWARF4=y
> CONFIG_GDB_SCRIPTS=y
> # CONFIG_ENABLE_MUST_CHECK is not set
> CONFIG_FRAME_WARN=1024
> # CONFIG_STRIP_ASM_SYMS is not set
> # CONFIG_READABLE_ASM is not set
> CONFIG_UNUSED_SYMBOLS=y
> # CONFIG_PAGE_OWNER is not set
> CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> # CONFIG_DEBUG_SECTION_MISMATCH is not set
> CONFIG_SECTION_MISMATCH_WARN_ONLY=y
> CONFIG_FRAME_POINTER=y
> CONFIG_STACK_VALIDATION=y
> # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6
> CONFIG_MAGIC_SYSRQ_SERIAL=y
> CONFIG_DEBUG_KERNEL=y
>
> #
> # Memory Debugging
> #
> CONFIG_PAGE_EXTENSION=y
> CONFIG_DEBUG_PAGEALLOC=y
> # CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
> # CONFIG_PAGE_POISONING is not set
> # CONFIG_DEBUG_PAGE_REF is not set
> # CONFIG_DEBUG_RODATA_TEST is not set
> CONFIG_DEBUG_OBJECTS=y
> CONFIG_DEBUG_OBJECTS_SELFTEST=y
> CONFIG_DEBUG_OBJECTS_FREE=y
> CONFIG_DEBUG_OBJECTS_TIMERS=y
> CONFIG_DEBUG_OBJECTS_WORK=y
> CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
> # CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
> CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
> # CONFIG_SLUB_DEBUG_ON is not set
> # CONFIG_SLUB_STATS is not set
> CONFIG_HAVE_DEBUG_KMEMLEAK=y
> CONFIG_DEBUG_KMEMLEAK=y
> CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1400
> # CONFIG_DEBUG_KMEMLEAK_TEST is not set
> # CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
> CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
> CONFIG_DEBUG_STACK_USAGE=y
> # CONFIG_DEBUG_VM is not set
> CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
> # CONFIG_DEBUG_VIRTUAL is not set
> CONFIG_DEBUG_MEMORY_INIT=y
> CONFIG_DEBUG_PER_CPU_MAPS=y
> CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
> CONFIG_DEBUG_STACKOVERFLOW=y
> CONFIG_HAVE_ARCH_KASAN=y
> CONFIG_CC_HAS_KASAN_GENERIC=y
> CONFIG_KASAN=y
> CONFIG_KASAN_GENERIC=y
> # CONFIG_KASAN_EXTRA is not set
> CONFIG_KASAN_OUTLINE=y
> # CONFIG_KASAN_INLINE is not set
> # CONFIG_TEST_KASAN is not set
> CONFIG_ARCH_HAS_KCOV=y
> CONFIG_CC_HAS_SANCOV_TRACE_PC=y
> # CONFIG_KCOV is not set
> # CONFIG_DEBUG_SHIRQ is not set
>
> #
> # Debug Lockups and Hangs
> #
> CONFIG_LOCKUP_DETECTOR=y
> CONFIG_SOFTLOCKUP_DETECTOR=y
> # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
> CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
> CONFIG_HARDLOCKUP_DETECTOR_PERF=y
> CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
> CONFIG_HARDLOCKUP_DETECTOR=y
> # CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
> CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
> CONFIG_DETECT_HUNG_TASK=y
> CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
> # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
> CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
> CONFIG_WQ_WATCHDOG=y
> # CONFIG_PANIC_ON_OOPS is not set
> CONFIG_PANIC_ON_OOPS_VALUE=0
> CONFIG_PANIC_TIMEOUT=0
> CONFIG_SCHED_DEBUG=y
> CONFIG_SCHED_INFO=y
> # CONFIG_SCHEDSTATS is not set
> # CONFIG_SCHED_STACK_END_CHECK is not set
> # CONFIG_DEBUG_TIMEKEEPING is not set
> CONFIG_DEBUG_PREEMPT=y
>
> #
> # Lock Debugging (spinlocks, mutexes, etc...)
> #
> CONFIG_LOCK_DEBUGGING_SUPPORT=y
> CONFIG_PROVE_LOCKING=y
> # CONFIG_LOCK_STAT is not set
> CONFIG_DEBUG_RT_MUTEXES=y
> CONFIG_DEBUG_SPINLOCK=y
> CONFIG_DEBUG_MUTEXES=y
> CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
> CONFIG_DEBUG_RWSEMS=y
> CONFIG_DEBUG_LOCK_ALLOC=y
> CONFIG_LOCKDEP=y
> # CONFIG_DEBUG_LOCKDEP is not set
> CONFIG_DEBUG_ATOMIC_SLEEP=y
> CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
> # CONFIG_LOCK_TORTURE_TEST is not set
> # CONFIG_WW_MUTEX_SELFTEST is not set
> CONFIG_TRACE_IRQFLAGS=y
> CONFIG_STACKTRACE=y
> # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
> # CONFIG_DEBUG_KOBJECT is not set
> # CONFIG_DEBUG_KOBJECT_RELEASE is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_DEBUG_LIST=y
> CONFIG_DEBUG_PI_LIST=y
> CONFIG_DEBUG_SG=y
> # CONFIG_DEBUG_NOTIFIERS is not set
> # CONFIG_DEBUG_CREDENTIALS is not set
>
> #
> # RCU Debugging
> #
> CONFIG_PROVE_RCU=y
> # CONFIG_RCU_PERF_TEST is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> CONFIG_RCU_CPU_STALL_TIMEOUT=60
> # CONFIG_RCU_TRACE is not set
> # CONFIG_RCU_EQS_DEBUG is not set
> # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
> # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
> # CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
> # CONFIG_NOTIFIER_ERROR_INJECTION is not set
> CONFIG_FAULT_INJECTION=y
> # CONFIG_FAILSLAB is not set
> # CONFIG_FAIL_PAGE_ALLOC is not set
> # CONFIG_FAIL_MAKE_REQUEST is not set
> # CONFIG_FAIL_IO_TIMEOUT is not set
> # CONFIG_FAIL_FUTEX is not set
> # CONFIG_FAULT_INJECTION_DEBUG_FS is not set
> # CONFIG_LATENCYTOP is not set
> CONFIG_USER_STACKTRACE_SUPPORT=y
> CONFIG_NOP_TRACER=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> CONFIG_HAVE_FENTRY=y
> CONFIG_HAVE_C_RECORDMCOUNT=y
> CONFIG_TRACER_MAX_TRACE=y
> CONFIG_TRACE_CLOCK=y
> CONFIG_RING_BUFFER=y
> CONFIG_EVENT_TRACING=y
> CONFIG_CONTEXT_SWITCH_TRACER=y
> CONFIG_PREEMPTIRQ_TRACEPOINTS=y
> CONFIG_TRACING=y
> CONFIG_GENERIC_TRACER=y
> CONFIG_TRACING_SUPPORT=y
> CONFIG_FTRACE=y
> CONFIG_FUNCTION_TRACER=y
> CONFIG_FUNCTION_GRAPH_TRACER=y
> # CONFIG_PREEMPTIRQ_EVENTS is not set
> # CONFIG_IRQSOFF_TRACER is not set
> # CONFIG_PREEMPT_TRACER is not set
> CONFIG_SCHED_TRACER=y
> CONFIG_HWLAT_TRACER=y
> CONFIG_FTRACE_SYSCALLS=y
> CONFIG_TRACER_SNAPSHOT=y
> # CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
> CONFIG_BRANCH_PROFILE_NONE=y
> # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
> # CONFIG_PROFILE_ALL_BRANCHES is not set
> CONFIG_STACK_TRACER=y
> CONFIG_BLK_DEV_IO_TRACE=y
> CONFIG_UPROBE_EVENTS=y
> CONFIG_BPF_EVENTS=y
> CONFIG_DYNAMIC_EVENTS=y
> CONFIG_PROBE_EVENTS=y
> CONFIG_DYNAMIC_FTRACE=y
> CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
> CONFIG_FUNCTION_PROFILER=y
> CONFIG_FTRACE_MCOUNT_RECORD=y
> # CONFIG_FTRACE_STARTUP_TEST is not set
> CONFIG_MMIOTRACE=y
> CONFIG_TRACING_MAP=y
> CONFIG_HIST_TRIGGERS=y
> # CONFIG_MMIOTRACE_TEST is not set
> # CONFIG_TRACEPOINT_BENCHMARK is not set
> # CONFIG_RING_BUFFER_BENCHMARK is not set
> # CONFIG_RING_BUFFER_STARTUP_TEST is not set
> # CONFIG_PREEMPTIRQ_DELAY_TEST is not set
> # CONFIG_TRACE_EVAL_MAP_FILE is not set
> CONFIG_TRACING_EVENTS_GPIO=y
> # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> # CONFIG_DMA_API_DEBUG is not set
> # CONFIG_RUNTIME_TESTING_MENU is not set
> # CONFIG_MEMTEST is not set
> # CONFIG_BUG_ON_DATA_CORRUPTION is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=y
> # CONFIG_KGDB is not set
> CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
> # CONFIG_UBSAN is not set
> CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
> CONFIG_STRICT_DEVMEM=y
> # CONFIG_IO_STRICT_DEVMEM is not set
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_EARLY_PRINTK_USB=y
> # CONFIG_X86_VERBOSE_BOOTUP is not set
> CONFIG_EARLY_PRINTK=y
> CONFIG_EARLY_PRINTK_DBGP=y
> CONFIG_EARLY_PRINTK_EFI=y
> # CONFIG_EARLY_PRINTK_USB_XDBC is not set
> CONFIG_X86_PTDUMP_CORE=y
> # CONFIG_X86_PTDUMP is not set
> # CONFIG_EFI_PGT_DUMP is not set
> CONFIG_DEBUG_WX=y
> CONFIG_DOUBLEFAULT=y
> # CONFIG_DEBUG_TLBFLUSH is not set
> CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> # CONFIG_IO_DELAY_0X80 is not set
> CONFIG_IO_DELAY_0XED=y
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEFAULT_IO_DELAY_TYPE=1
> CONFIG_DEBUG_BOOT_PARAMS=y
> # CONFIG_CPA_DEBUG is not set
> CONFIG_OPTIMIZE_INLINING=y
> # CONFIG_DEBUG_ENTRY is not set
> # CONFIG_DEBUG_NMI_SELFTEST is not set
> CONFIG_X86_DEBUG_FPU=y
> # CONFIG_PUNIT_ATOM_DEBUG is not set
> # CONFIG_UNWINDER_ORC is not set
> CONFIG_UNWINDER_FRAME_POINTER=y
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-12 17:47 ` Paul E. McKenney
@ 2019-02-12 19:15 ` Paul E. McKenney
2019-02-13 0:44 ` Bart Van Assche
2019-02-13 0:47 ` Bart Van Assche
1 sibling, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-12 19:15 UTC (permalink / raw)
On Tue, Feb 12, 2019@09:47:15AM -0800, Paul E. McKenney wrote:
> On Tue, Feb 12, 2019@08:47:00AM -0800, Bart Van Assche wrote:
[ . . . ]
> > Please let me know if you need more information.
>
> It looks to me like you need an srcu_barrier(&head->srcu) just before
> the call to cleanup_srcu_struct_quiesced() in nvme_free_ns_head().
> Or maybe earlier in the cleanup flow, but most definitely -after- the
> last invocation of call_srcu().
>
> Does that help? Or is there a call to srcu_barrier() somewhere that I
> am blind to?
And please see below for a patch that should allow SRCU to provide
greatly improved diagnostics for my hypothesized scenario.
Thanx, Paul
------------------------------------------------------------------------
commit 266c20cf63cdcecb3856dbc7886529082f0acaf5
Author: Paul E. McKenney <paulmck at linux.ibm.com>
Date: Tue Feb 12 10:44:33 2019 -0800
srcu: Check for in-flight callbacks in _cleanup_srcu_struct()
If someone fails to drain the corresponding SRCU callbacks (for
example, by failing to invoke srcu_barrier()) before invoking either
cleanup_srcu_struct() or cleanup_srcu_struct_quiesced(), the resulting
diagnostic is an ambiguous use-after-free diagnostic, and even then
only if you are running something like KASAN. This commit therefore
improves SRCU diagnostics by adding checks for in-flight callbacks at
_cleanup_srcu_struct() time.
Note that these diagnostics can still be defeated, for example, by
invoking call_srcu() concurrently with cleanup_srcu_struct(). Which is
a really bad idea, but sometimes all too easy to do. But even then,
these diagnostics have at least some probability of catching the problem.
Reported-by: Sagi Grimberg <sagi at grimberg.me>
Reported-by: Bart Van Assche <bvanassche at acm.org>
Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
index a60b8ba9e1ac..4f30f3ecabc1 100644
--- a/kernel/rcu/srcutree.c
+++ b/kernel/rcu/srcutree.c
@@ -387,6 +387,8 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
del_timer_sync(&sdp->delay_work);
flush_work(&sdp->work);
}
+ if (WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist)))
+ return; /* Forgot srcu_barrier(), so just leak it! */
}
if (WARN_ON(rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)) != SRCU_STATE_IDLE) ||
WARN_ON(srcu_readers_active(ssp))) {
^ permalink raw reply related [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-12 19:15 ` Paul E. McKenney
@ 2019-02-13 0:44 ` Bart Van Assche
2019-02-13 1:10 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-13 0:44 UTC (permalink / raw)
On Tue, 2019-02-12@11:15 -0800, Paul E. McKenney wrote:
> [ ... ]
> And please see below for a patch that should allow SRCU to provide
> greatly improved diagnostics for my hypothesized scenario.
>
> ------------------------------------------------------------------------
>
> commit 266c20cf63cdcecb3856dbc7886529082f0acaf5
> Author: Paul E. McKenney <paulmck at linux.ibm.com>
> Date: Tue Feb 12 10:44:33 2019 -0800
>
> srcu: Check for in-flight callbacks in _cleanup_srcu_struct()
>
> If someone fails to drain the corresponding SRCU callbacks (for
> example, by failing to invoke srcu_barrier()) before invoking either
> cleanup_srcu_struct() or cleanup_srcu_struct_quiesced(), the resulting
> diagnostic is an ambiguous use-after-free diagnostic, and even then
> only if you are running something like KASAN. This commit therefore
> improves SRCU diagnostics by adding checks for in-flight callbacks at
> _cleanup_srcu_struct() time.
>
> Note that these diagnostics can still be defeated, for example, by
> invoking call_srcu() concurrently with cleanup_srcu_struct(). Which is
> a really bad idea, but sometimes all too easy to do. But even then,
> these diagnostics have at least some probability of catching the problem.
>
> Reported-by: Sagi Grimberg <sagi at grimberg.me>
> Reported-by: Bart Van Assche <bvanassche at acm.org>
> Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
>
> diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
> index a60b8ba9e1ac..4f30f3ecabc1 100644
> --- a/kernel/rcu/srcutree.c
> +++ b/kernel/rcu/srcutree.c
> @@ -387,6 +387,8 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
> del_timer_sync(&sdp->delay_work);
> flush_work(&sdp->work);
> }
> + if (WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist)))
> + return; /* Forgot srcu_barrier(), so just leak it! */
> }
> if (WARN_ON(rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)) != SRCU_STATE_IDLE) ||
> WARN_ON(srcu_readers_active(ssp))) {
Hi Paul,
With this patch applied I still see the KASAN use-after-free complaint but no prior
warning from inside the RCU code.
Bart.
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-12 17:47 ` Paul E. McKenney
2019-02-12 19:15 ` Paul E. McKenney
@ 2019-02-13 0:47 ` Bart Van Assche
2019-02-13 1:07 ` Paul E. McKenney
1 sibling, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-13 0:47 UTC (permalink / raw)
On Tue, 2019-02-12@09:47 -0800, Paul E. McKenney wrote:
> It looks to me like you need an srcu_barrier(&head->srcu) just before
> the call to cleanup_srcu_struct_quiesced() in nvme_free_ns_head().
> Or maybe earlier in the cleanup flow, but most definitely -after- the
> last invocation of call_srcu().
>
> Does that help? Or is there a call to srcu_barrier() somewhere that I
> am blind to?
Hi Paul,
Even with this patch applied I still see the KASAN use-after-free warning:
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 6a9dd68c0f4f..f2e47af6f8ee 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -391,6 +391,7 @@ static void nvme_free_ns_head(struct kref *ref)
nvme_mpath_remove_disk(head);
ida_simple_remove(&head->subsys->ns_ida, head->instance);
list_del_init(&head->entry);
+ srcu_barrier(&head->srcu);
cleanup_srcu_struct_quiesced(&head->srcu);
nvme_put_subsystem(head->subsys);
kfree(head);
Does that mean that I misunderstood you?
Thanks,
Bart.
^ permalink raw reply related [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 0:47 ` Bart Van Assche
@ 2019-02-13 1:07 ` Paul E. McKenney
0 siblings, 0 replies; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-13 1:07 UTC (permalink / raw)
On Tue, Feb 12, 2019@04:47:16PM -0800, Bart Van Assche wrote:
> On Tue, 2019-02-12@09:47 -0800, Paul E. McKenney wrote:
> > It looks to me like you need an srcu_barrier(&head->srcu) just before
> > the call to cleanup_srcu_struct_quiesced() in nvme_free_ns_head().
> > Or maybe earlier in the cleanup flow, but most definitely -after- the
> > last invocation of call_srcu().
> >
> > Does that help? Or is there a call to srcu_barrier() somewhere that I
> > am blind to?
>
> Hi Paul,
>
> Even with this patch applied I still see the KASAN use-after-free warning:
>
> diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
> index 6a9dd68c0f4f..f2e47af6f8ee 100644
> --- a/drivers/nvme/host/core.c
> +++ b/drivers/nvme/host/core.c
> @@ -391,6 +391,7 @@ static void nvme_free_ns_head(struct kref *ref)
> nvme_mpath_remove_disk(head);
> ida_simple_remove(&head->subsys->ns_ida, head->instance);
> list_del_init(&head->entry);
> + srcu_barrier(&head->srcu);
> cleanup_srcu_struct_quiesced(&head->srcu);
> nvme_put_subsystem(head->subsys);
> kfree(head);
>
> Does that mean that I misunderstood you?
That is in fact what I was asking you to do. So perhaps I misunderstood
your code. Some questions:
1. Are there any other places that either cleanup_srcu_struct()
or cleanup_srcu_struct_quiesced() are invoked? If so, it is
possible that the others also need srcu_barrier().
2. What prevents call_srcu() from being invoked about the
time that cleanup_srcu_struct_quiesced() is called?
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 0:44 ` Bart Van Assche
@ 2019-02-13 1:10 ` Paul E. McKenney
2019-02-13 15:19 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-13 1:10 UTC (permalink / raw)
On Tue, Feb 12, 2019@04:44:59PM -0800, Bart Van Assche wrote:
> On Tue, 2019-02-12@11:15 -0800, Paul E. McKenney wrote:
> > [ ... ]
> > And please see below for a patch that should allow SRCU to provide
> > greatly improved diagnostics for my hypothesized scenario.
> >
> > ------------------------------------------------------------------------
> >
> > commit 266c20cf63cdcecb3856dbc7886529082f0acaf5
> > Author: Paul E. McKenney <paulmck at linux.ibm.com>
> > Date: Tue Feb 12 10:44:33 2019 -0800
> >
> > srcu: Check for in-flight callbacks in _cleanup_srcu_struct()
> >
> > If someone fails to drain the corresponding SRCU callbacks (for
> > example, by failing to invoke srcu_barrier()) before invoking either
> > cleanup_srcu_struct() or cleanup_srcu_struct_quiesced(), the resulting
> > diagnostic is an ambiguous use-after-free diagnostic, and even then
> > only if you are running something like KASAN. This commit therefore
> > improves SRCU diagnostics by adding checks for in-flight callbacks at
> > _cleanup_srcu_struct() time.
> >
> > Note that these diagnostics can still be defeated, for example, by
> > invoking call_srcu() concurrently with cleanup_srcu_struct(). Which is
> > a really bad idea, but sometimes all too easy to do. But even then,
> > these diagnostics have at least some probability of catching the problem.
> >
> > Reported-by: Sagi Grimberg <sagi at grimberg.me>
> > Reported-by: Bart Van Assche <bvanassche at acm.org>
> > Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
> >
> > diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
> > index a60b8ba9e1ac..4f30f3ecabc1 100644
> > --- a/kernel/rcu/srcutree.c
> > +++ b/kernel/rcu/srcutree.c
> > @@ -387,6 +387,8 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
> > del_timer_sync(&sdp->delay_work);
> > flush_work(&sdp->work);
> > }
> > + if (WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist)))
> > + return; /* Forgot srcu_barrier(), so just leak it! */
> > }
> > if (WARN_ON(rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)) != SRCU_STATE_IDLE) ||
> > WARN_ON(srcu_readers_active(ssp))) {
>
> Hi Paul,
>
> With this patch applied I still see the KASAN use-after-free complaint but no prior
> warning from inside the RCU code.
Hmmm...
I don't see how the KASAN warning could happen without srcu_struct_cleanup()
or srcu_struct_cleanup_quiesced() being called. Perhaps a failure of
imagination on my part.
So does it seem plausible to you that one of those two has been called
at the time the KASAN complaint is emitted?
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 1:10 ` Paul E. McKenney
@ 2019-02-13 15:19 ` Paul E. McKenney
2019-02-13 15:24 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-13 15:19 UTC (permalink / raw)
On Tue, Feb 12, 2019@05:10:23PM -0800, Paul E. McKenney wrote:
> On Tue, Feb 12, 2019@04:44:59PM -0800, Bart Van Assche wrote:
> > On Tue, 2019-02-12@11:15 -0800, Paul E. McKenney wrote:
> > > [ ... ]
> > > And please see below for a patch that should allow SRCU to provide
> > > greatly improved diagnostics for my hypothesized scenario.
> > >
> > > ------------------------------------------------------------------------
> > >
> > > commit 266c20cf63cdcecb3856dbc7886529082f0acaf5
> > > Author: Paul E. McKenney <paulmck at linux.ibm.com>
> > > Date: Tue Feb 12 10:44:33 2019 -0800
> > >
> > > srcu: Check for in-flight callbacks in _cleanup_srcu_struct()
> > >
> > > If someone fails to drain the corresponding SRCU callbacks (for
> > > example, by failing to invoke srcu_barrier()) before invoking either
> > > cleanup_srcu_struct() or cleanup_srcu_struct_quiesced(), the resulting
> > > diagnostic is an ambiguous use-after-free diagnostic, and even then
> > > only if you are running something like KASAN. This commit therefore
> > > improves SRCU diagnostics by adding checks for in-flight callbacks at
> > > _cleanup_srcu_struct() time.
> > >
> > > Note that these diagnostics can still be defeated, for example, by
> > > invoking call_srcu() concurrently with cleanup_srcu_struct(). Which is
> > > a really bad idea, but sometimes all too easy to do. But even then,
> > > these diagnostics have at least some probability of catching the problem.
> > >
> > > Reported-by: Sagi Grimberg <sagi at grimberg.me>
> > > Reported-by: Bart Van Assche <bvanassche at acm.org>
> > > Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
> > >
> > > diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
> > > index a60b8ba9e1ac..4f30f3ecabc1 100644
> > > --- a/kernel/rcu/srcutree.c
> > > +++ b/kernel/rcu/srcutree.c
> > > @@ -387,6 +387,8 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
> > > del_timer_sync(&sdp->delay_work);
> > > flush_work(&sdp->work);
> > > }
> > > + if (WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist)))
> > > + return; /* Forgot srcu_barrier(), so just leak it! */
> > > }
> > > if (WARN_ON(rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)) != SRCU_STATE_IDLE) ||
> > > WARN_ON(srcu_readers_active(ssp))) {
> >
> > Hi Paul,
> >
> > With this patch applied I still see the KASAN use-after-free complaint but no prior
> > warning from inside the RCU code.
>
> Hmmm...
>
> I don't see how the KASAN warning could happen without srcu_struct_cleanup()
> or srcu_struct_cleanup_quiesced() being called. Perhaps a failure of
> imagination on my part.
>
> So does it seem plausible to you that one of those two has been called
> at the time the KASAN complaint is emitted?
After sleeping on this...
You are getting the KASAN warning at the same place each time?
This would force me to hypothesize that you are invoking
srcu_struct_cleanup_quiesced() from a workqueue spawned from
an SRCU callback. Is that the case?
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 15:19 ` Paul E. McKenney
@ 2019-02-13 15:24 ` Paul E. McKenney
2019-02-13 18:36 ` Bart Van Assche
2019-02-13 19:13 ` Paul E. McKenney
0 siblings, 2 replies; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-13 15:24 UTC (permalink / raw)
On Wed, Feb 13, 2019@07:19:17AM -0800, Paul E. McKenney wrote:
> On Tue, Feb 12, 2019@05:10:23PM -0800, Paul E. McKenney wrote:
> > On Tue, Feb 12, 2019@04:44:59PM -0800, Bart Van Assche wrote:
> > > On Tue, 2019-02-12@11:15 -0800, Paul E. McKenney wrote:
> > > > [ ... ]
> > > > And please see below for a patch that should allow SRCU to provide
> > > > greatly improved diagnostics for my hypothesized scenario.
> > > >
> > > > ------------------------------------------------------------------------
> > > >
> > > > commit 266c20cf63cdcecb3856dbc7886529082f0acaf5
> > > > Author: Paul E. McKenney <paulmck at linux.ibm.com>
> > > > Date: Tue Feb 12 10:44:33 2019 -0800
> > > >
> > > > srcu: Check for in-flight callbacks in _cleanup_srcu_struct()
> > > >
> > > > If someone fails to drain the corresponding SRCU callbacks (for
> > > > example, by failing to invoke srcu_barrier()) before invoking either
> > > > cleanup_srcu_struct() or cleanup_srcu_struct_quiesced(), the resulting
> > > > diagnostic is an ambiguous use-after-free diagnostic, and even then
> > > > only if you are running something like KASAN. This commit therefore
> > > > improves SRCU diagnostics by adding checks for in-flight callbacks at
> > > > _cleanup_srcu_struct() time.
> > > >
> > > > Note that these diagnostics can still be defeated, for example, by
> > > > invoking call_srcu() concurrently with cleanup_srcu_struct(). Which is
> > > > a really bad idea, but sometimes all too easy to do. But even then,
> > > > these diagnostics have at least some probability of catching the problem.
> > > >
> > > > Reported-by: Sagi Grimberg <sagi at grimberg.me>
> > > > Reported-by: Bart Van Assche <bvanassche at acm.org>
> > > > Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
> > > >
> > > > diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
> > > > index a60b8ba9e1ac..4f30f3ecabc1 100644
> > > > --- a/kernel/rcu/srcutree.c
> > > > +++ b/kernel/rcu/srcutree.c
> > > > @@ -387,6 +387,8 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
> > > > del_timer_sync(&sdp->delay_work);
> > > > flush_work(&sdp->work);
> > > > }
> > > > + if (WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist)))
> > > > + return; /* Forgot srcu_barrier(), so just leak it! */
> > > > }
> > > > if (WARN_ON(rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)) != SRCU_STATE_IDLE) ||
> > > > WARN_ON(srcu_readers_active(ssp))) {
> > >
> > > Hi Paul,
> > >
> > > With this patch applied I still see the KASAN use-after-free complaint but no prior
> > > warning from inside the RCU code.
> >
> > Hmmm...
> >
> > I don't see how the KASAN warning could happen without srcu_struct_cleanup()
> > or srcu_struct_cleanup_quiesced() being called. Perhaps a failure of
> > imagination on my part.
> >
> > So does it seem plausible to you that one of those two has been called
> > at the time the KASAN complaint is emitted?
>
> After sleeping on this...
>
> You are getting the KASAN warning at the same place each time?
>
> This would force me to hypothesize that you are invoking
> srcu_struct_cleanup_quiesced() from a workqueue spawned from
> an SRCU callback. Is that the case?
You could get the same effect by doing an synchronize_srcu() within
a workqueue handler, come to think of it.
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 15:24 ` Paul E. McKenney
@ 2019-02-13 18:36 ` Bart Van Assche
2019-02-13 18:48 ` Paul E. McKenney
2019-02-13 19:13 ` Paul E. McKenney
1 sibling, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-13 18:36 UTC (permalink / raw)
On Wed, 2019-02-13@07:24 -0800, Paul E. McKenney wrote:
> On Wed, Feb 13, 2019@07:19:17AM -0800, Paul E. McKenney wrote:
> > After sleeping on this...
> >
> > You are getting the KASAN warning at the same place each time?
> >
> > This would force me to hypothesize that you are invoking
> > srcu_struct_cleanup_quiesced() from a workqueue spawned from
> > an SRCU callback. Is that the case?
>
> You could get the same effect by doing an synchronize_srcu() within
> a workqueue handler, come to think of it.
Hi Paul,
The KASAN warning indeed occurs at the same place each time.
Have you noticed that there are no call_srcu() calls at all in the NVMe
code? Since I'm not an RCU expert: what causes the SRCU code to invoke
srcu_invoke_callbacks() if call_srcu() is not used?
Thanks,
Bart.
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 18:36 ` Bart Van Assche
@ 2019-02-13 18:48 ` Paul E. McKenney
2019-02-13 19:12 ` Bart Van Assche
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-13 18:48 UTC (permalink / raw)
On Wed, Feb 13, 2019@10:36:04AM -0800, Bart Van Assche wrote:
> On Wed, 2019-02-13@07:24 -0800, Paul E. McKenney wrote:
> > On Wed, Feb 13, 2019@07:19:17AM -0800, Paul E. McKenney wrote:
> > > After sleeping on this...
> > >
> > > You are getting the KASAN warning at the same place each time?
> > >
> > > This would force me to hypothesize that you are invoking
> > > srcu_struct_cleanup_quiesced() from a workqueue spawned from
> > > an SRCU callback. Is that the case?
> >
> > You could get the same effect by doing an synchronize_srcu() within
> > a workqueue handler, come to think of it.
>
> Hi Paul,
>
> The KASAN warning indeed occurs at the same place each time.
>
> Have you noticed that there are no call_srcu() calls at all in the NVMe
> code? Since I'm not an RCU expert: what causes the SRCU code to invoke
> srcu_invoke_callbacks() if call_srcu() is not used?
I think I figured this out and am documenting it. The trick is that
synchronize_srcu() internally does a call_srcu(), or close enough, anyway.
The reason you are using srcu_struct_cleanup_quiesced() is to avoid
workqueue deadlocks?
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 18:48 ` Paul E. McKenney
@ 2019-02-13 19:12 ` Bart Van Assche
2019-02-13 19:30 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-13 19:12 UTC (permalink / raw)
On Wed, 2019-02-13@10:48 -0800, Paul E. McKenney wrote:
> On Wed, Feb 13, 2019@10:36:04AM -0800, Bart Van Assche wrote:
> > On Wed, 2019-02-13@07:24 -0800, Paul E. McKenney wrote:
> > > On Wed, Feb 13, 2019@07:19:17AM -0800, Paul E. McKenney wrote:
> > > > After sleeping on this...
> > > >
> > > > You are getting the KASAN warning at the same place each time?
> > > >
> > > > This would force me to hypothesize that you are invoking
> > > > srcu_struct_cleanup_quiesced() from a workqueue spawned from
> > > > an SRCU callback. Is that the case?
> > >
> > > You could get the same effect by doing an synchronize_srcu() within
> > > a workqueue handler, come to think of it.
> >
> > Hi Paul,
> >
> > The KASAN warning indeed occurs at the same place each time.
> >
> > Have you noticed that there are no call_srcu() calls at all in the NVMe
> > code? Since I'm not an RCU expert: what causes the SRCU code to invoke
> > srcu_invoke_callbacks() if call_srcu() is not used?
>
> I think I figured this out and am documenting it. The trick is that
> synchronize_srcu() internally does a call_srcu(), or close enough, anyway.
>
> The reason you are using srcu_struct_cleanup_quiesced() is to avoid
> workqueue deadlocks?
Hi Paul,
This patch introduced the srcu_struct_cleanup_quiesced() call:
commit 4317228ad9b86f094d70c951f9210a8a9b2816be
Author: Nitzan Carmi <nitzanc at mellanox.com>
Date: Mon Apr 9 17:50:26 2018 +0300
nvme: Avoid flush dependency in delete controller flow
The nvme_delete_ctrl() function queues a work item on a MEM_RECLAIM
queue (nvme_delete_wq), which eventually calls cleanup_srcu_struct(),
which in turn flushes a delayed work from an !MEM_RECLAIM queue. This
is unsafe as we might trigger deadlocks under severe memory pressure.
Since we don't ever invoke call_srcu(), it is safe to use the shiny new
_quiesced() version of srcu cleanup, thus avoiding that flush dependency.
This commit makes that change.
Signed-off-by: Nitzan Carmi <nitzanc at mellanox.com>
Signed-off-by: Paul E. McKenney <paulmck at linux.vnet.ibm.com>
Reviewed-by: Max Gurtovoy <maxg at mellanox.com>
Tested-by: Nicholas Piggin <npiggin at gmail.com>
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 9df4f71e58ca..c3cea8a29843 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -349,7 +349,7 @@ static void nvme_free_ns_head(struct kref *ref)
nvme_mpath_remove_disk(head);
ida_simple_remove(&head->subsys->ns_ida, head->instance);
list_del_init(&head->entry);
- cleanup_srcu_struct(&head->srcu);
+ cleanup_srcu_struct_quiesced(&head->srcu);
kfree(head);
}
Bart.
^ permalink raw reply related [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 15:24 ` Paul E. McKenney
2019-02-13 18:36 ` Bart Van Assche
@ 2019-02-13 19:13 ` Paul E. McKenney
1 sibling, 0 replies; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-13 19:13 UTC (permalink / raw)
On Wed, Feb 13, 2019@07:24:13AM -0800, Paul E. McKenney wrote:
> On Wed, Feb 13, 2019@07:19:17AM -0800, Paul E. McKenney wrote:
> > On Tue, Feb 12, 2019@05:10:23PM -0800, Paul E. McKenney wrote:
> > > On Tue, Feb 12, 2019@04:44:59PM -0800, Bart Van Assche wrote:
> > > > On Tue, 2019-02-12@11:15 -0800, Paul E. McKenney wrote:
> > > > > [ ... ]
> > > > > And please see below for a patch that should allow SRCU to provide
> > > > > greatly improved diagnostics for my hypothesized scenario.
> > > > >
> > > > > ------------------------------------------------------------------------
> > > > >
> > > > > commit 266c20cf63cdcecb3856dbc7886529082f0acaf5
> > > > > Author: Paul E. McKenney <paulmck at linux.ibm.com>
> > > > > Date: Tue Feb 12 10:44:33 2019 -0800
> > > > >
> > > > > srcu: Check for in-flight callbacks in _cleanup_srcu_struct()
> > > > >
> > > > > If someone fails to drain the corresponding SRCU callbacks (for
> > > > > example, by failing to invoke srcu_barrier()) before invoking either
> > > > > cleanup_srcu_struct() or cleanup_srcu_struct_quiesced(), the resulting
> > > > > diagnostic is an ambiguous use-after-free diagnostic, and even then
> > > > > only if you are running something like KASAN. This commit therefore
> > > > > improves SRCU diagnostics by adding checks for in-flight callbacks at
> > > > > _cleanup_srcu_struct() time.
> > > > >
> > > > > Note that these diagnostics can still be defeated, for example, by
> > > > > invoking call_srcu() concurrently with cleanup_srcu_struct(). Which is
> > > > > a really bad idea, but sometimes all too easy to do. But even then,
> > > > > these diagnostics have at least some probability of catching the problem.
> > > > >
> > > > > Reported-by: Sagi Grimberg <sagi at grimberg.me>
> > > > > Reported-by: Bart Van Assche <bvanassche at acm.org>
> > > > > Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
> > > > >
> > > > > diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
> > > > > index a60b8ba9e1ac..4f30f3ecabc1 100644
> > > > > --- a/kernel/rcu/srcutree.c
> > > > > +++ b/kernel/rcu/srcutree.c
> > > > > @@ -387,6 +387,8 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
> > > > > del_timer_sync(&sdp->delay_work);
> > > > > flush_work(&sdp->work);
> > > > > }
> > > > > + if (WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist)))
> > > > > + return; /* Forgot srcu_barrier(), so just leak it! */
> > > > > }
> > > > > if (WARN_ON(rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)) != SRCU_STATE_IDLE) ||
> > > > > WARN_ON(srcu_readers_active(ssp))) {
> > > >
> > > > Hi Paul,
> > > >
> > > > With this patch applied I still see the KASAN use-after-free complaint but no prior
> > > > warning from inside the RCU code.
> > >
> > > Hmmm...
> > >
> > > I don't see how the KASAN warning could happen without srcu_struct_cleanup()
> > > or srcu_struct_cleanup_quiesced() being called. Perhaps a failure of
> > > imagination on my part.
> > >
> > > So does it seem plausible to you that one of those two has been called
> > > at the time the KASAN complaint is emitted?
> >
> > After sleeping on this...
> >
> > You are getting the KASAN warning at the same place each time?
> >
> > This would force me to hypothesize that you are invoking
> > srcu_struct_cleanup_quiesced() from a workqueue spawned from
> > an SRCU callback. Is that the case?
>
> You could get the same effect by doing an synchronize_srcu() within
> a workqueue handler, come to think of it.
Which is what appears to be happening, again assuming that KASAN is
emitting its complaint at the same place each time. Here is the
sequence of events that could explain the failure, albeit with an
unusual compilation and a surprisingly exact point of preemption:
o nvme_ns_remove() invokes synchronize_srcu(). This causes the
current context to sleep, and to be awakened from within an SRCU
callback, which runs in a workqueue handler. When this callback
returns, srcu_invoke_callbacks() will update callback-remaining
counts in the per-CPU data associated with the srcu_struct.
Let's assume that SRCU's workqueue handler is delayed just as
the callback returns.
o nvme_ns_remove() invokes nvme_mpath_check_last_path() and then
nvme_put_ns().
o nvme_put_ns() does a kref_put(), and if the count is zero, kref_put()
invokes nvme_free_ns().
o nvme_free_ns() invokes nvme_put_ns_head(), which also does a
kref_put(), and if the count is zero, kref_put() invokes
nvme_free_ns_head().
o nvme_free_ns_head() invokes cleanup_srcu_struct_quiesced(), which
frees the per-CPU data associated with the srcu_struct. And
somehow avoids the WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist)).
o SRCU's workqueue handler resumes, and executes this code, which
references the just-freed per-CPU data:
spin_lock_irq_rcu_node(sdp);
rcu_segcblist_insert_count(&sdp->srcu_cblist, &ready_cbs);
(void)rcu_segcblist_accelerate(&sdp->srcu_cblist,
rcu_seq_snap(&ssp->srcu_gp_seq));
sdp->srcu_cblist_invoking = false;
more = rcu_segcblist_ready_cbs(&sdp->srcu_cblist);
spin_unlock_irq_rcu_node(sdp);
But this is surprising, as it requires rcu_segcblist_insert_count()
to be compiled just so:
void rcu_segcblist_insert_count(struct rcu_segcblist *rsclp,
struct rcu_cblist *rclp)
{
rsclp->len_lazy += rclp->len_lazy;
/* ->len sampled locklessly. */
WRITE_ONCE(rsclp->len, rsclp->len + rclp->len);
rclp->len_lazy = 0;
rclp->len = 0;
}
To avoid the warning patch I gave you yesterday, the compiler
would need to reverse the first two statements, like this:
void rcu_segcblist_insert_count(struct rcu_segcblist *rsclp,
struct rcu_cblist *rclp)
{
/* ->len sampled locklessly. */
WRITE_ONCE(rsclp->len, rsclp->len + rclp->len);
rsclp->len_lazy += rclp->len_lazy;
rclp->len_lazy = 0;
rclp->len = 0;
}
Is that happening in your build?
Regardless, this can happen. My usual advice would be for you to invoke
cleanup_srcu_struct() instead of cleanup_srcu_struct_quiesced(), which will
wait for ongoing work associated with this srcu_struct to complete. Is it
possible to make this change?
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 19:12 ` Bart Van Assche
@ 2019-02-13 19:30 ` Paul E. McKenney
2019-02-13 19:52 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-13 19:30 UTC (permalink / raw)
On Wed, Feb 13, 2019@11:12:16AM -0800, Bart Van Assche wrote:
> On Wed, 2019-02-13@10:48 -0800, Paul E. McKenney wrote:
> > On Wed, Feb 13, 2019@10:36:04AM -0800, Bart Van Assche wrote:
> > > On Wed, 2019-02-13@07:24 -0800, Paul E. McKenney wrote:
> > > > On Wed, Feb 13, 2019@07:19:17AM -0800, Paul E. McKenney wrote:
> > > > > After sleeping on this...
> > > > >
> > > > > You are getting the KASAN warning at the same place each time?
> > > > >
> > > > > This would force me to hypothesize that you are invoking
> > > > > srcu_struct_cleanup_quiesced() from a workqueue spawned from
> > > > > an SRCU callback. Is that the case?
> > > >
> > > > You could get the same effect by doing an synchronize_srcu() within
> > > > a workqueue handler, come to think of it.
> > >
> > > Hi Paul,
> > >
> > > The KASAN warning indeed occurs at the same place each time.
> > >
> > > Have you noticed that there are no call_srcu() calls at all in the NVMe
> > > code? Since I'm not an RCU expert: what causes the SRCU code to invoke
> > > srcu_invoke_callbacks() if call_srcu() is not used?
> >
> > I think I figured this out and am documenting it. The trick is that
> > synchronize_srcu() internally does a call_srcu(), or close enough, anyway.
> >
> > The reason you are using srcu_struct_cleanup_quiesced() is to avoid
> > workqueue deadlocks?
>
> Hi Paul,
>
> This patch introduced the srcu_struct_cleanup_quiesced() call:
OK, then yes, workqueue deadlocks. Ouch.
Did my analysis of the bug make sense?
Thanx, Paul
> commit 4317228ad9b86f094d70c951f9210a8a9b2816be
> Author: Nitzan Carmi <nitzanc at mellanox.com>
> Date: Mon Apr 9 17:50:26 2018 +0300
>
> nvme: Avoid flush dependency in delete controller flow
>
> The nvme_delete_ctrl() function queues a work item on a MEM_RECLAIM
> queue (nvme_delete_wq), which eventually calls cleanup_srcu_struct(),
> which in turn flushes a delayed work from an !MEM_RECLAIM queue. This
> is unsafe as we might trigger deadlocks under severe memory pressure.
>
> Since we don't ever invoke call_srcu(), it is safe to use the shiny new
> _quiesced() version of srcu cleanup, thus avoiding that flush dependency.
> This commit makes that change.
>
> Signed-off-by: Nitzan Carmi <nitzanc at mellanox.com>
> Signed-off-by: Paul E. McKenney <paulmck at linux.vnet.ibm.com>
> Reviewed-by: Max Gurtovoy <maxg at mellanox.com>
> Tested-by: Nicholas Piggin <npiggin at gmail.com>
>
> diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
> index 9df4f71e58ca..c3cea8a29843 100644
> --- a/drivers/nvme/host/core.c
> +++ b/drivers/nvme/host/core.c
> @@ -349,7 +349,7 @@ static void nvme_free_ns_head(struct kref *ref)
> nvme_mpath_remove_disk(head);
> ida_simple_remove(&head->subsys->ns_ida, head->instance);
> list_del_init(&head->entry);
> - cleanup_srcu_struct(&head->srcu);
> + cleanup_srcu_struct_quiesced(&head->srcu);
> kfree(head);
> }
>
> Bart.
>
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 19:30 ` Paul E. McKenney
@ 2019-02-13 19:52 ` Paul E. McKenney
2019-02-13 21:00 ` Bart Van Assche
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-13 19:52 UTC (permalink / raw)
On Wed, Feb 13, 2019@11:30:13AM -0800, Paul E. McKenney wrote:
> On Wed, Feb 13, 2019@11:12:16AM -0800, Bart Van Assche wrote:
> > On Wed, 2019-02-13@10:48 -0800, Paul E. McKenney wrote:
> > > On Wed, Feb 13, 2019@10:36:04AM -0800, Bart Van Assche wrote:
> > > > On Wed, 2019-02-13@07:24 -0800, Paul E. McKenney wrote:
> > > > > On Wed, Feb 13, 2019@07:19:17AM -0800, Paul E. McKenney wrote:
> > > > > > After sleeping on this...
> > > > > >
> > > > > > You are getting the KASAN warning at the same place each time?
> > > > > >
> > > > > > This would force me to hypothesize that you are invoking
> > > > > > srcu_struct_cleanup_quiesced() from a workqueue spawned from
> > > > > > an SRCU callback. Is that the case?
> > > > >
> > > > > You could get the same effect by doing an synchronize_srcu() within
> > > > > a workqueue handler, come to think of it.
> > > >
> > > > Hi Paul,
> > > >
> > > > The KASAN warning indeed occurs at the same place each time.
> > > >
> > > > Have you noticed that there are no call_srcu() calls at all in the NVMe
> > > > code? Since I'm not an RCU expert: what causes the SRCU code to invoke
> > > > srcu_invoke_callbacks() if call_srcu() is not used?
> > >
> > > I think I figured this out and am documenting it. The trick is that
> > > synchronize_srcu() internally does a call_srcu(), or close enough, anyway.
> > >
> > > The reason you are using srcu_struct_cleanup_quiesced() is to avoid
> > > workqueue deadlocks?
> >
> > Hi Paul,
> >
> > This patch introduced the srcu_struct_cleanup_quiesced() call:
>
> OK, then yes, workqueue deadlocks. Ouch.
>
> Did my analysis of the bug make sense?
>
> Thanx, Paul
>
> > commit 4317228ad9b86f094d70c951f9210a8a9b2816be
> > Author: Nitzan Carmi <nitzanc at mellanox.com>
> > Date: Mon Apr 9 17:50:26 2018 +0300
> >
> > nvme: Avoid flush dependency in delete controller flow
> >
> > The nvme_delete_ctrl() function queues a work item on a MEM_RECLAIM
> > queue (nvme_delete_wq), which eventually calls cleanup_srcu_struct(),
> > which in turn flushes a delayed work from an !MEM_RECLAIM queue. This
> > is unsafe as we might trigger deadlocks under severe memory pressure.
Except that RCU's workqueues have since been set up as WQ_MEM_RECLAIM.
So could you please try switching back to cleanup_srcu_struct()?
Thanx, Paul
> > Since we don't ever invoke call_srcu(), it is safe to use the shiny new
> > _quiesced() version of srcu cleanup, thus avoiding that flush dependency.
> > This commit makes that change.
> >
> > Signed-off-by: Nitzan Carmi <nitzanc at mellanox.com>
> > Signed-off-by: Paul E. McKenney <paulmck at linux.vnet.ibm.com>
> > Reviewed-by: Max Gurtovoy <maxg at mellanox.com>
> > Tested-by: Nicholas Piggin <npiggin at gmail.com>
> >
> > diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
> > index 9df4f71e58ca..c3cea8a29843 100644
> > --- a/drivers/nvme/host/core.c
> > +++ b/drivers/nvme/host/core.c
> > @@ -349,7 +349,7 @@ static void nvme_free_ns_head(struct kref *ref)
> > nvme_mpath_remove_disk(head);
> > ida_simple_remove(&head->subsys->ns_ida, head->instance);
> > list_del_init(&head->entry);
> > - cleanup_srcu_struct(&head->srcu);
> > + cleanup_srcu_struct_quiesced(&head->srcu);
> > kfree(head);
> > }
> >
> > Bart.
> >
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 19:52 ` Paul E. McKenney
@ 2019-02-13 21:00 ` Bart Van Assche
2019-02-13 22:09 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-13 21:00 UTC (permalink / raw)
On Wed, 2019-02-13@11:52 -0800, Paul E. McKenney wrote:
> On Wed, Feb 13, 2019@11:30:13AM -0800, Paul E. McKenney wrote:
> > On Wed, Feb 13, 2019@11:12:16AM -0800, Bart Van Assche wrote:
> > > commit 4317228ad9b86f094d70c951f9210a8a9b2816be
> > > Author: Nitzan Carmi <nitzanc at mellanox.com>
> > > Date: Mon Apr 9 17:50:26 2018 +0300
> > >
> > > nvme: Avoid flush dependency in delete controller flow
> > >
> > > The nvme_delete_ctrl() function queues a work item on a MEM_RECLAIM
> > > queue (nvme_delete_wq), which eventually calls cleanup_srcu_struct(),
> > > which in turn flushes a delayed work from an !MEM_RECLAIM queue. This
> > > is unsafe as we might trigger deadlocks under severe memory pressure.
>
> Except that RCU's workqueues have since been set up as WQ_MEM_RECLAIM.
>
> So could you please try switching back to cleanup_srcu_struct()?
(just back from lunch)
Hi Paul,
That change is sufficient to get rid of the KASAN use-after-free complaint.
Do you want to submit a patch or do you expect me to do that? If I have to
prepare a patch I think it will take a significant effort to come up with a
good patch description.
Bart.
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 21:00 ` Bart Van Assche
@ 2019-02-13 22:09 ` Paul E. McKenney
2019-02-13 23:07 ` Paul E. McKenney
2019-02-14 0:21 ` Bart Van Assche
0 siblings, 2 replies; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-13 22:09 UTC (permalink / raw)
On Wed, Feb 13, 2019@01:00:12PM -0800, Bart Van Assche wrote:
> On Wed, 2019-02-13@11:52 -0800, Paul E. McKenney wrote:
> > On Wed, Feb 13, 2019@11:30:13AM -0800, Paul E. McKenney wrote:
> > > On Wed, Feb 13, 2019@11:12:16AM -0800, Bart Van Assche wrote:
> > > > commit 4317228ad9b86f094d70c951f9210a8a9b2816be
> > > > Author: Nitzan Carmi <nitzanc at mellanox.com>
> > > > Date: Mon Apr 9 17:50:26 2018 +0300
> > > >
> > > > nvme: Avoid flush dependency in delete controller flow
> > > >
> > > > The nvme_delete_ctrl() function queues a work item on a MEM_RECLAIM
> > > > queue (nvme_delete_wq), which eventually calls cleanup_srcu_struct(),
> > > > which in turn flushes a delayed work from an !MEM_RECLAIM queue. This
> > > > is unsafe as we might trigger deadlocks under severe memory pressure.
> >
> > Except that RCU's workqueues have since been set up as WQ_MEM_RECLAIM.
> >
> > So could you please try switching back to cleanup_srcu_struct()?
>
> (just back from lunch)
>
> Hi Paul,
>
> That change is sufficient to get rid of the KASAN use-after-free complaint.
> Do you want to submit a patch or do you expect me to do that? If I have to
> prepare a patch I think it will take a significant effort to come up with a
> good patch description.
How about the following untested patch? (Starting tests now.)
Thanx, Paul
------------------------------------------------------------------------
commit 65f1b53aeb25a9bddabd08e37bb4c7246320f993
Author: Paul E. McKenney <paulmck at linux.ibm.com>
Date: Wed Feb 13 13:54:37 2019 -0800
srcu: Remove cleanup_srcu_struct_quiesced()
The cleanup_srcu_struct_quiesced() function was added because NVME
used WQ_MEM_RECLAIM workqueues and SRCU did not, which meant that
NVME workqueues waiting on SRCU workqueues could result in deadlocks
during low-memory conditions. However, SRCU now also has WQ_MEM_RECLAIM
workqueues, so there is no longer a potential for deadlock. Furthermore,
it turns out to be extremely hard to use cleanup_srcu_struct_quiesced()
correctly due to the fact that SRCU callback invocation accesses the
srcu_struct structure's per-CPU data area just after callbacks are
invoked. Therefore, the usual practice of using srcu_barrier() to wait
for callbacks to be invoked before invoking cleanup_srcu_struct_quiesced()
fails because SRCU's callback-invocation workqueue handler might be
delayed, which can result in cleanup_srcu_struct_quiesced() being invoked
(and thus freeing the per-CPU data) before the SRCU's callback-invocation
workqueue handler is finished using that per-CPU data. Nor is this a
theoretical problem: KASAN emitted use-after-free warnings because of
this problem on actual runs.
In short, NVME can now safely invoke cleanup_srcu_struct(), which
avoids the use-after-free scenario. And cleanup_srcu_struct_quiesced()
is quite difficult to use safely. This commit therefore removes
cleanup_srcu_struct_quiesced(), switching its sole user back to
cleanup_srcu_struct(). This effectively reverts the following pair
of commits:
f7194ac32ca2 ("srcu: Add cleanup_srcu_struct_quiesced()")
4317228ad9b8 ("nvme: Avoid flush dependency in delete controller flow")
Reported-by: Bart Van Assche <bvanassche at acm.org>
Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 150e49723c15..72ca25c8cc41 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -391,7 +391,7 @@ static void nvme_free_ns_head(struct kref *ref)
nvme_mpath_remove_disk(head);
ida_simple_remove(&head->subsys->ns_ida, head->instance);
list_del_init(&head->entry);
- cleanup_srcu_struct_quiesced(&head->srcu);
+ cleanup_srcu_struct(&head->srcu);
nvme_put_subsystem(head->subsys);
kfree(head);
}
diff --git a/include/linux/srcu.h b/include/linux/srcu.h
index c495b2d51569..e432cc92c73d 100644
--- a/include/linux/srcu.h
+++ b/include/linux/srcu.h
@@ -56,45 +56,11 @@ struct srcu_struct { };
void call_srcu(struct srcu_struct *ssp, struct rcu_head *head,
void (*func)(struct rcu_head *head));
-void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced);
+void cleanup_srcu_struct(struct srcu_struct *ssp);
int __srcu_read_lock(struct srcu_struct *ssp) __acquires(ssp);
void __srcu_read_unlock(struct srcu_struct *ssp, int idx) __releases(ssp);
void synchronize_srcu(struct srcu_struct *ssp);
-/**
- * cleanup_srcu_struct - deconstruct a sleep-RCU structure
- * @ssp: structure to clean up.
- *
- * Must invoke this after you are finished using a given srcu_struct that
- * was initialized via init_srcu_struct(), else you leak memory.
- */
-static inline void cleanup_srcu_struct(struct srcu_struct *ssp)
-{
- _cleanup_srcu_struct(ssp, false);
-}
-
-/**
- * cleanup_srcu_struct_quiesced - deconstruct a quiesced sleep-RCU structure
- * @ssp: structure to clean up.
- *
- * Must invoke this after you are finished using a given srcu_struct that
- * was initialized via init_srcu_struct(), else you leak memory. Also,
- * all grace-period processing must have completed.
- *
- * "Completed" means that the last synchronize_srcu() and
- * synchronize_srcu_expedited() calls must have returned before the call
- * to cleanup_srcu_struct_quiesced(). It also means that the callback
- * from the last call_srcu() must have been invoked before the call to
- * cleanup_srcu_struct_quiesced(), but you can use srcu_barrier() to help
- * with this last. Violating these rules will get you a WARN_ON() splat
- * (with high probability, anyway), and will also cause the srcu_struct
- * to be leaked.
- */
-static inline void cleanup_srcu_struct_quiesced(struct srcu_struct *ssp)
-{
- _cleanup_srcu_struct(ssp, true);
-}
-
#ifdef CONFIG_DEBUG_LOCK_ALLOC
/**
diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
index f14d1b18a74f..d2b226110835 100644
--- a/kernel/rcu/rcutorture.c
+++ b/kernel/rcu/rcutorture.c
@@ -592,12 +592,7 @@ static void srcu_torture_init(void)
static void srcu_torture_cleanup(void)
{
- static DEFINE_TORTURE_RANDOM(rand);
-
- if (torture_random(&rand) & 0x800)
- cleanup_srcu_struct(&srcu_ctld);
- else
- cleanup_srcu_struct_quiesced(&srcu_ctld);
+ cleanup_srcu_struct(&srcu_ctld);
srcu_ctlp = &srcu_ctl; /* In case of a later rcutorture run. */
}
diff --git a/kernel/rcu/srcutiny.c b/kernel/rcu/srcutiny.c
index 5d4a39a6505a..44d6606b8325 100644
--- a/kernel/rcu/srcutiny.c
+++ b/kernel/rcu/srcutiny.c
@@ -76,19 +76,16 @@ EXPORT_SYMBOL_GPL(init_srcu_struct);
* Must invoke this after you are finished using a given srcu_struct that
* was initialized via init_srcu_struct(), else you leak memory.
*/
-void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
+void cleanup_srcu_struct(struct srcu_struct *ssp)
{
WARN_ON(ssp->srcu_lock_nesting[0] || ssp->srcu_lock_nesting[1]);
- if (quiesced)
- WARN_ON(work_pending(&ssp->srcu_work));
- else
- flush_work(&ssp->srcu_work);
+ flush_work(&ssp->srcu_work);
WARN_ON(ssp->srcu_gp_running);
WARN_ON(ssp->srcu_gp_waiting);
WARN_ON(ssp->srcu_cb_head);
WARN_ON(&ssp->srcu_cb_head != ssp->srcu_cb_tail);
}
-EXPORT_SYMBOL_GPL(_cleanup_srcu_struct);
+EXPORT_SYMBOL_GPL(cleanup_srcu_struct);
/*
* Removes the count for the old reader from the appropriate element of
diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
index 4f30f3ecabc1..9b761e546de8 100644
--- a/kernel/rcu/srcutree.c
+++ b/kernel/rcu/srcutree.c
@@ -360,8 +360,14 @@ static unsigned long srcu_get_delay(struct srcu_struct *ssp)
return SRCU_INTERVAL;
}
-/* Helper for cleanup_srcu_struct() and cleanup_srcu_struct_quiesced(). */
-void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
+/**
+ * cleanup_srcu_struct - deconstruct a sleep-RCU structure
+ * @ssp: structure to clean up.
+ *
+ * Must invoke this after you are finished using a given srcu_struct that
+ * was initialized via init_srcu_struct(), else you leak memory.
+ */
+void cleanup_srcu_struct(struct srcu_struct *ssp)
{
int cpu;
@@ -369,24 +375,12 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
return; /* Just leak it! */
if (WARN_ON(srcu_readers_active(ssp)))
return; /* Just leak it! */
- if (quiesced) {
- if (WARN_ON(delayed_work_pending(&ssp->work)))
- return; /* Just leak it! */
- } else {
- flush_delayed_work(&ssp->work);
- }
+ flush_delayed_work(&ssp->work);
for_each_possible_cpu(cpu) {
struct srcu_data *sdp = per_cpu_ptr(ssp->sda, cpu);
- if (quiesced) {
- if (WARN_ON(timer_pending(&sdp->delay_work)))
- return; /* Just leak it! */
- if (WARN_ON(work_pending(&sdp->work)))
- return; /* Just leak it! */
- } else {
- del_timer_sync(&sdp->delay_work);
- flush_work(&sdp->work);
- }
+ del_timer_sync(&sdp->delay_work);
+ flush_work(&sdp->work);
if (WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist)))
return; /* Forgot srcu_barrier(), so just leak it! */
}
@@ -399,7 +393,7 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
free_percpu(ssp->sda);
ssp->sda = NULL;
}
-EXPORT_SYMBOL_GPL(_cleanup_srcu_struct);
+EXPORT_SYMBOL_GPL(cleanup_srcu_struct);
/*
* Counts the new reader in the appropriate per-CPU element of the
^ permalink raw reply related [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 22:09 ` Paul E. McKenney
@ 2019-02-13 23:07 ` Paul E. McKenney
2019-02-14 0:21 ` Bart Van Assche
1 sibling, 0 replies; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-13 23:07 UTC (permalink / raw)
On Wed, Feb 13, 2019@02:09:23PM -0800, Paul E. McKenney wrote:
> On Wed, Feb 13, 2019@01:00:12PM -0800, Bart Van Assche wrote:
> > On Wed, 2019-02-13@11:52 -0800, Paul E. McKenney wrote:
> > > On Wed, Feb 13, 2019@11:30:13AM -0800, Paul E. McKenney wrote:
> > > > On Wed, Feb 13, 2019@11:12:16AM -0800, Bart Van Assche wrote:
> > > > > commit 4317228ad9b86f094d70c951f9210a8a9b2816be
> > > > > Author: Nitzan Carmi <nitzanc at mellanox.com>
> > > > > Date: Mon Apr 9 17:50:26 2018 +0300
> > > > >
> > > > > nvme: Avoid flush dependency in delete controller flow
> > > > >
> > > > > The nvme_delete_ctrl() function queues a work item on a MEM_RECLAIM
> > > > > queue (nvme_delete_wq), which eventually calls cleanup_srcu_struct(),
> > > > > which in turn flushes a delayed work from an !MEM_RECLAIM queue. This
> > > > > is unsafe as we might trigger deadlocks under severe memory pressure.
> > >
> > > Except that RCU's workqueues have since been set up as WQ_MEM_RECLAIM.
> > >
> > > So could you please try switching back to cleanup_srcu_struct()?
> >
> > (just back from lunch)
> >
> > Hi Paul,
> >
> > That change is sufficient to get rid of the KASAN use-after-free complaint.
> > Do you want to submit a patch or do you expect me to do that? If I have to
> > prepare a patch I think it will take a significant effort to come up with a
> > good patch description.
>
> How about the following untested patch? (Starting tests now.)
And this passes light rcutorture testing. I will run somewhat more
extensive tests overnight (Pacific Time).
Thanx, Paul
> ------------------------------------------------------------------------
>
> commit 65f1b53aeb25a9bddabd08e37bb4c7246320f993
> Author: Paul E. McKenney <paulmck at linux.ibm.com>
> Date: Wed Feb 13 13:54:37 2019 -0800
>
> srcu: Remove cleanup_srcu_struct_quiesced()
>
> The cleanup_srcu_struct_quiesced() function was added because NVME
> used WQ_MEM_RECLAIM workqueues and SRCU did not, which meant that
> NVME workqueues waiting on SRCU workqueues could result in deadlocks
> during low-memory conditions. However, SRCU now also has WQ_MEM_RECLAIM
> workqueues, so there is no longer a potential for deadlock. Furthermore,
> it turns out to be extremely hard to use cleanup_srcu_struct_quiesced()
> correctly due to the fact that SRCU callback invocation accesses the
> srcu_struct structure's per-CPU data area just after callbacks are
> invoked. Therefore, the usual practice of using srcu_barrier() to wait
> for callbacks to be invoked before invoking cleanup_srcu_struct_quiesced()
> fails because SRCU's callback-invocation workqueue handler might be
> delayed, which can result in cleanup_srcu_struct_quiesced() being invoked
> (and thus freeing the per-CPU data) before the SRCU's callback-invocation
> workqueue handler is finished using that per-CPU data. Nor is this a
> theoretical problem: KASAN emitted use-after-free warnings because of
> this problem on actual runs.
>
> In short, NVME can now safely invoke cleanup_srcu_struct(), which
> avoids the use-after-free scenario. And cleanup_srcu_struct_quiesced()
> is quite difficult to use safely. This commit therefore removes
> cleanup_srcu_struct_quiesced(), switching its sole user back to
> cleanup_srcu_struct(). This effectively reverts the following pair
> of commits:
>
> f7194ac32ca2 ("srcu: Add cleanup_srcu_struct_quiesced()")
> 4317228ad9b8 ("nvme: Avoid flush dependency in delete controller flow")
>
> Reported-by: Bart Van Assche <bvanassche at acm.org>
> Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
>
> diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
> index 150e49723c15..72ca25c8cc41 100644
> --- a/drivers/nvme/host/core.c
> +++ b/drivers/nvme/host/core.c
> @@ -391,7 +391,7 @@ static void nvme_free_ns_head(struct kref *ref)
> nvme_mpath_remove_disk(head);
> ida_simple_remove(&head->subsys->ns_ida, head->instance);
> list_del_init(&head->entry);
> - cleanup_srcu_struct_quiesced(&head->srcu);
> + cleanup_srcu_struct(&head->srcu);
> nvme_put_subsystem(head->subsys);
> kfree(head);
> }
> diff --git a/include/linux/srcu.h b/include/linux/srcu.h
> index c495b2d51569..e432cc92c73d 100644
> --- a/include/linux/srcu.h
> +++ b/include/linux/srcu.h
> @@ -56,45 +56,11 @@ struct srcu_struct { };
>
> void call_srcu(struct srcu_struct *ssp, struct rcu_head *head,
> void (*func)(struct rcu_head *head));
> -void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced);
> +void cleanup_srcu_struct(struct srcu_struct *ssp);
> int __srcu_read_lock(struct srcu_struct *ssp) __acquires(ssp);
> void __srcu_read_unlock(struct srcu_struct *ssp, int idx) __releases(ssp);
> void synchronize_srcu(struct srcu_struct *ssp);
>
> -/**
> - * cleanup_srcu_struct - deconstruct a sleep-RCU structure
> - * @ssp: structure to clean up.
> - *
> - * Must invoke this after you are finished using a given srcu_struct that
> - * was initialized via init_srcu_struct(), else you leak memory.
> - */
> -static inline void cleanup_srcu_struct(struct srcu_struct *ssp)
> -{
> - _cleanup_srcu_struct(ssp, false);
> -}
> -
> -/**
> - * cleanup_srcu_struct_quiesced - deconstruct a quiesced sleep-RCU structure
> - * @ssp: structure to clean up.
> - *
> - * Must invoke this after you are finished using a given srcu_struct that
> - * was initialized via init_srcu_struct(), else you leak memory. Also,
> - * all grace-period processing must have completed.
> - *
> - * "Completed" means that the last synchronize_srcu() and
> - * synchronize_srcu_expedited() calls must have returned before the call
> - * to cleanup_srcu_struct_quiesced(). It also means that the callback
> - * from the last call_srcu() must have been invoked before the call to
> - * cleanup_srcu_struct_quiesced(), but you can use srcu_barrier() to help
> - * with this last. Violating these rules will get you a WARN_ON() splat
> - * (with high probability, anyway), and will also cause the srcu_struct
> - * to be leaked.
> - */
> -static inline void cleanup_srcu_struct_quiesced(struct srcu_struct *ssp)
> -{
> - _cleanup_srcu_struct(ssp, true);
> -}
> -
> #ifdef CONFIG_DEBUG_LOCK_ALLOC
>
> /**
> diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
> index f14d1b18a74f..d2b226110835 100644
> --- a/kernel/rcu/rcutorture.c
> +++ b/kernel/rcu/rcutorture.c
> @@ -592,12 +592,7 @@ static void srcu_torture_init(void)
>
> static void srcu_torture_cleanup(void)
> {
> - static DEFINE_TORTURE_RANDOM(rand);
> -
> - if (torture_random(&rand) & 0x800)
> - cleanup_srcu_struct(&srcu_ctld);
> - else
> - cleanup_srcu_struct_quiesced(&srcu_ctld);
> + cleanup_srcu_struct(&srcu_ctld);
> srcu_ctlp = &srcu_ctl; /* In case of a later rcutorture run. */
> }
>
> diff --git a/kernel/rcu/srcutiny.c b/kernel/rcu/srcutiny.c
> index 5d4a39a6505a..44d6606b8325 100644
> --- a/kernel/rcu/srcutiny.c
> +++ b/kernel/rcu/srcutiny.c
> @@ -76,19 +76,16 @@ EXPORT_SYMBOL_GPL(init_srcu_struct);
> * Must invoke this after you are finished using a given srcu_struct that
> * was initialized via init_srcu_struct(), else you leak memory.
> */
> -void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
> +void cleanup_srcu_struct(struct srcu_struct *ssp)
> {
> WARN_ON(ssp->srcu_lock_nesting[0] || ssp->srcu_lock_nesting[1]);
> - if (quiesced)
> - WARN_ON(work_pending(&ssp->srcu_work));
> - else
> - flush_work(&ssp->srcu_work);
> + flush_work(&ssp->srcu_work);
> WARN_ON(ssp->srcu_gp_running);
> WARN_ON(ssp->srcu_gp_waiting);
> WARN_ON(ssp->srcu_cb_head);
> WARN_ON(&ssp->srcu_cb_head != ssp->srcu_cb_tail);
> }
> -EXPORT_SYMBOL_GPL(_cleanup_srcu_struct);
> +EXPORT_SYMBOL_GPL(cleanup_srcu_struct);
>
> /*
> * Removes the count for the old reader from the appropriate element of
> diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
> index 4f30f3ecabc1..9b761e546de8 100644
> --- a/kernel/rcu/srcutree.c
> +++ b/kernel/rcu/srcutree.c
> @@ -360,8 +360,14 @@ static unsigned long srcu_get_delay(struct srcu_struct *ssp)
> return SRCU_INTERVAL;
> }
>
> -/* Helper for cleanup_srcu_struct() and cleanup_srcu_struct_quiesced(). */
> -void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
> +/**
> + * cleanup_srcu_struct - deconstruct a sleep-RCU structure
> + * @ssp: structure to clean up.
> + *
> + * Must invoke this after you are finished using a given srcu_struct that
> + * was initialized via init_srcu_struct(), else you leak memory.
> + */
> +void cleanup_srcu_struct(struct srcu_struct *ssp)
> {
> int cpu;
>
> @@ -369,24 +375,12 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
> return; /* Just leak it! */
> if (WARN_ON(srcu_readers_active(ssp)))
> return; /* Just leak it! */
> - if (quiesced) {
> - if (WARN_ON(delayed_work_pending(&ssp->work)))
> - return; /* Just leak it! */
> - } else {
> - flush_delayed_work(&ssp->work);
> - }
> + flush_delayed_work(&ssp->work);
> for_each_possible_cpu(cpu) {
> struct srcu_data *sdp = per_cpu_ptr(ssp->sda, cpu);
>
> - if (quiesced) {
> - if (WARN_ON(timer_pending(&sdp->delay_work)))
> - return; /* Just leak it! */
> - if (WARN_ON(work_pending(&sdp->work)))
> - return; /* Just leak it! */
> - } else {
> - del_timer_sync(&sdp->delay_work);
> - flush_work(&sdp->work);
> - }
> + del_timer_sync(&sdp->delay_work);
> + flush_work(&sdp->work);
> if (WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist)))
> return; /* Forgot srcu_barrier(), so just leak it! */
> }
> @@ -399,7 +393,7 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced)
> free_percpu(ssp->sda);
> ssp->sda = NULL;
> }
> -EXPORT_SYMBOL_GPL(_cleanup_srcu_struct);
> +EXPORT_SYMBOL_GPL(cleanup_srcu_struct);
>
> /*
> * Counts the new reader in the appropriate per-CPU element of the
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-13 22:09 ` Paul E. McKenney
2019-02-13 23:07 ` Paul E. McKenney
@ 2019-02-14 0:21 ` Bart Van Assche
2019-02-14 1:02 ` Paul E. McKenney
1 sibling, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-14 0:21 UTC (permalink / raw)
On Wed, 2019-02-13@14:09 -0800, Paul E. McKenney wrote:
> commit 65f1b53aeb25a9bddabd08e37bb4c7246320f993
> Author: Paul E. McKenney <paulmck at linux.ibm.com>
> Date: Wed Feb 13 13:54:37 2019 -0800
>
> srcu: Remove cleanup_srcu_struct_quiesced()
>
> The cleanup_srcu_struct_quiesced() function was added because NVME
> used WQ_MEM_RECLAIM workqueues and SRCU did not, which meant that
> NVME workqueues waiting on SRCU workqueues could result in deadlocks
> during low-memory conditions. However, SRCU now also has WQ_MEM_RECLAIM
> workqueues, so there is no longer a potential for deadlock. Furthermore,
> it turns out to be extremely hard to use cleanup_srcu_struct_quiesced()
> correctly due to the fact that SRCU callback invocation accesses the
> srcu_struct structure's per-CPU data area just after callbacks are
> invoked. Therefore, the usual practice of using srcu_barrier() to wait
> for callbacks to be invoked before invoking cleanup_srcu_struct_quiesced()
> fails because SRCU's callback-invocation workqueue handler might be
> delayed, which can result in cleanup_srcu_struct_quiesced() being invoked
> (and thus freeing the per-CPU data) before the SRCU's callback-invocation
> workqueue handler is finished using that per-CPU data. Nor is this a
> theoretical problem: KASAN emitted use-after-free warnings because of
> this problem on actual runs.
>
> In short, NVME can now safely invoke cleanup_srcu_struct(), which
> avoids the use-after-free scenario. And cleanup_srcu_struct_quiesced()
> is quite difficult to use safely. This commit therefore removes
> cleanup_srcu_struct_quiesced(), switching its sole user back to
> cleanup_srcu_struct(). This effectively reverts the following pair
> of commits:
>
> f7194ac32ca2 ("srcu: Add cleanup_srcu_struct_quiesced()")
> 4317228ad9b8 ("nvme: Avoid flush dependency in delete controller flow")
>
> Reported-by: Bart Van Assche <bvanassche at acm.org>
> Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
>
> [ ... ]
Reviewed-by: Bart Van Assche <bvanassche at acm.org>
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-14 0:21 ` Bart Van Assche
@ 2019-02-14 1:02 ` Paul E. McKenney
2019-02-26 17:35 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-14 1:02 UTC (permalink / raw)
On Wed, Feb 13, 2019@04:21:53PM -0800, Bart Van Assche wrote:
> On Wed, 2019-02-13@14:09 -0800, Paul E. McKenney wrote:
> > commit 65f1b53aeb25a9bddabd08e37bb4c7246320f993
> > Author: Paul E. McKenney <paulmck at linux.ibm.com>
> > Date: Wed Feb 13 13:54:37 2019 -0800
> >
> > srcu: Remove cleanup_srcu_struct_quiesced()
> >
> > The cleanup_srcu_struct_quiesced() function was added because NVME
> > used WQ_MEM_RECLAIM workqueues and SRCU did not, which meant that
> > NVME workqueues waiting on SRCU workqueues could result in deadlocks
> > during low-memory conditions. However, SRCU now also has WQ_MEM_RECLAIM
> > workqueues, so there is no longer a potential for deadlock. Furthermore,
> > it turns out to be extremely hard to use cleanup_srcu_struct_quiesced()
> > correctly due to the fact that SRCU callback invocation accesses the
> > srcu_struct structure's per-CPU data area just after callbacks are
> > invoked. Therefore, the usual practice of using srcu_barrier() to wait
> > for callbacks to be invoked before invoking cleanup_srcu_struct_quiesced()
> > fails because SRCU's callback-invocation workqueue handler might be
> > delayed, which can result in cleanup_srcu_struct_quiesced() being invoked
> > (and thus freeing the per-CPU data) before the SRCU's callback-invocation
> > workqueue handler is finished using that per-CPU data. Nor is this a
> > theoretical problem: KASAN emitted use-after-free warnings because of
> > this problem on actual runs.
> >
> > In short, NVME can now safely invoke cleanup_srcu_struct(), which
> > avoids the use-after-free scenario. And cleanup_srcu_struct_quiesced()
> > is quite difficult to use safely. This commit therefore removes
> > cleanup_srcu_struct_quiesced(), switching its sole user back to
> > cleanup_srcu_struct(). This effectively reverts the following pair
> > of commits:
> >
> > f7194ac32ca2 ("srcu: Add cleanup_srcu_struct_quiesced()")
> > 4317228ad9b8 ("nvme: Avoid flush dependency in delete controller flow")
> >
> > Reported-by: Bart Van Assche <bvanassche at acm.org>
> > Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
> >
> > [ ... ]
>
> Reviewed-by: Bart Van Assche <bvanassche at acm.org>
Applied thank you!
Looking forward to hearing the results of testing as well!
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-14 1:02 ` Paul E. McKenney
@ 2019-02-26 17:35 ` Paul E. McKenney
2019-02-26 17:47 ` Bart Van Assche
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-26 17:35 UTC (permalink / raw)
On Wed, Feb 13, 2019@05:02:10PM -0800, Paul E. McKenney wrote:
> On Wed, Feb 13, 2019@04:21:53PM -0800, Bart Van Assche wrote:
> > On Wed, 2019-02-13@14:09 -0800, Paul E. McKenney wrote:
> > > commit 65f1b53aeb25a9bddabd08e37bb4c7246320f993
> > > Author: Paul E. McKenney <paulmck at linux.ibm.com>
> > > Date: Wed Feb 13 13:54:37 2019 -0800
> > >
> > > srcu: Remove cleanup_srcu_struct_quiesced()
> > >
> > > The cleanup_srcu_struct_quiesced() function was added because NVME
> > > used WQ_MEM_RECLAIM workqueues and SRCU did not, which meant that
> > > NVME workqueues waiting on SRCU workqueues could result in deadlocks
> > > during low-memory conditions. However, SRCU now also has WQ_MEM_RECLAIM
> > > workqueues, so there is no longer a potential for deadlock. Furthermore,
> > > it turns out to be extremely hard to use cleanup_srcu_struct_quiesced()
> > > correctly due to the fact that SRCU callback invocation accesses the
> > > srcu_struct structure's per-CPU data area just after callbacks are
> > > invoked. Therefore, the usual practice of using srcu_barrier() to wait
> > > for callbacks to be invoked before invoking cleanup_srcu_struct_quiesced()
> > > fails because SRCU's callback-invocation workqueue handler might be
> > > delayed, which can result in cleanup_srcu_struct_quiesced() being invoked
> > > (and thus freeing the per-CPU data) before the SRCU's callback-invocation
> > > workqueue handler is finished using that per-CPU data. Nor is this a
> > > theoretical problem: KASAN emitted use-after-free warnings because of
> > > this problem on actual runs.
> > >
> > > In short, NVME can now safely invoke cleanup_srcu_struct(), which
> > > avoids the use-after-free scenario. And cleanup_srcu_struct_quiesced()
> > > is quite difficult to use safely. This commit therefore removes
> > > cleanup_srcu_struct_quiesced(), switching its sole user back to
> > > cleanup_srcu_struct(). This effectively reverts the following pair
> > > of commits:
> > >
> > > f7194ac32ca2 ("srcu: Add cleanup_srcu_struct_quiesced()")
> > > 4317228ad9b8 ("nvme: Avoid flush dependency in delete controller flow")
> > >
> > > Reported-by: Bart Van Assche <bvanassche at acm.org>
> > > Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
> > >
> > > [ ... ]
> >
> > Reviewed-by: Bart Van Assche <bvanassche at acm.org>
>
> Applied thank you!
>
> Looking forward to hearing the results of testing as well!
The time during which I might reasonably push this into the upcoming
(v5.1) merge window is quickly drawing to a close. If you need this
before the v5.2 merge window, could you please let me know? If so,
a Tested-by would make things work much more smoothly.
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-26 17:35 ` Paul E. McKenney
@ 2019-02-26 17:47 ` Bart Van Assche
2019-02-26 18:12 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-26 17:47 UTC (permalink / raw)
On Tue, 2019-02-26@09:35 -0800, Paul E. McKenney wrote:
> On Wed, Feb 13, 2019@05:02:10PM -0800, Paul E. McKenney wrote:
> > On Wed, Feb 13, 2019@04:21:53PM -0800, Bart Van Assche wrote:
> > > On Wed, 2019-02-13@14:09 -0800, Paul E. McKenney wrote:
> > > > commit 65f1b53aeb25a9bddabd08e37bb4c7246320f993
> > > > Author: Paul E. McKenney <paulmck at linux.ibm.com>
> > > > Date: Wed Feb 13 13:54:37 2019 -0800
> > > >
> > > > srcu: Remove cleanup_srcu_struct_quiesced()
> > > >
> > > > The cleanup_srcu_struct_quiesced() function was added because NVME
> > > > used WQ_MEM_RECLAIM workqueues and SRCU did not, which meant that
> > > > NVME workqueues waiting on SRCU workqueues could result in deadlocks
> > > > during low-memory conditions. However, SRCU now also has WQ_MEM_RECLAIM
> > > > workqueues, so there is no longer a potential for deadlock. Furthermore,
> > > > it turns out to be extremely hard to use cleanup_srcu_struct_quiesced()
> > > > correctly due to the fact that SRCU callback invocation accesses the
> > > > srcu_struct structure's per-CPU data area just after callbacks are
> > > > invoked. Therefore, the usual practice of using srcu_barrier() to wait
> > > > for callbacks to be invoked before invoking cleanup_srcu_struct_quiesced()
> > > > fails because SRCU's callback-invocation workqueue handler might be
> > > > delayed, which can result in cleanup_srcu_struct_quiesced() being invoked
> > > > (and thus freeing the per-CPU data) before the SRCU's callback-invocation
> > > > workqueue handler is finished using that per-CPU data. Nor is this a
> > > > theoretical problem: KASAN emitted use-after-free warnings because of
> > > > this problem on actual runs.
> > > >
> > > > In short, NVME can now safely invoke cleanup_srcu_struct(), which
> > > > avoids the use-after-free scenario. And cleanup_srcu_struct_quiesced()
> > > > is quite difficult to use safely. This commit therefore removes
> > > > cleanup_srcu_struct_quiesced(), switching its sole user back to
> > > > cleanup_srcu_struct(). This effectively reverts the following pair
> > > > of commits:
> > > >
> > > > f7194ac32ca2 ("srcu: Add cleanup_srcu_struct_quiesced()")
> > > > 4317228ad9b8 ("nvme: Avoid flush dependency in delete controller flow")
> > > >
> > > > Reported-by: Bart Van Assche <bvanassche at acm.org>
> > > > Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
> > > >
> > > > [ ... ]
> > >
> > > Reviewed-by: Bart Van Assche <bvanassche at acm.org>
> >
> > Applied thank you!
> >
> > Looking forward to hearing the results of testing as well!
>
> The time during which I might reasonably push this into the upcoming
> (v5.1) merge window is quickly drawing to a close. If you need this
> before the v5.2 merge window, could you please let me know? If so,
> a Tested-by would make things work much more smoothly.
Hi Paul,
Sorry that I had not yet reported that my tests pass with this patch applied.
Feel free to add the following:
Tested-by: Bart Van Assche <bvanassche at acm.org>
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-26 17:47 ` Bart Van Assche
@ 2019-02-26 18:12 ` Paul E. McKenney
2019-02-26 18:40 ` Bart Van Assche
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-26 18:12 UTC (permalink / raw)
On Tue, Feb 26, 2019@09:47:04AM -0800, Bart Van Assche wrote:
> On Tue, 2019-02-26@09:35 -0800, Paul E. McKenney wrote:
> > On Wed, Feb 13, 2019@05:02:10PM -0800, Paul E. McKenney wrote:
> > > On Wed, Feb 13, 2019@04:21:53PM -0800, Bart Van Assche wrote:
> > > > On Wed, 2019-02-13@14:09 -0800, Paul E. McKenney wrote:
> > > > > commit 65f1b53aeb25a9bddabd08e37bb4c7246320f993
> > > > > Author: Paul E. McKenney <paulmck at linux.ibm.com>
> > > > > Date: Wed Feb 13 13:54:37 2019 -0800
> > > > >
> > > > > srcu: Remove cleanup_srcu_struct_quiesced()
> > > > >
> > > > > The cleanup_srcu_struct_quiesced() function was added because NVME
> > > > > used WQ_MEM_RECLAIM workqueues and SRCU did not, which meant that
> > > > > NVME workqueues waiting on SRCU workqueues could result in deadlocks
> > > > > during low-memory conditions. However, SRCU now also has WQ_MEM_RECLAIM
> > > > > workqueues, so there is no longer a potential for deadlock. Furthermore,
> > > > > it turns out to be extremely hard to use cleanup_srcu_struct_quiesced()
> > > > > correctly due to the fact that SRCU callback invocation accesses the
> > > > > srcu_struct structure's per-CPU data area just after callbacks are
> > > > > invoked. Therefore, the usual practice of using srcu_barrier() to wait
> > > > > for callbacks to be invoked before invoking cleanup_srcu_struct_quiesced()
> > > > > fails because SRCU's callback-invocation workqueue handler might be
> > > > > delayed, which can result in cleanup_srcu_struct_quiesced() being invoked
> > > > > (and thus freeing the per-CPU data) before the SRCU's callback-invocation
> > > > > workqueue handler is finished using that per-CPU data. Nor is this a
> > > > > theoretical problem: KASAN emitted use-after-free warnings because of
> > > > > this problem on actual runs.
> > > > >
> > > > > In short, NVME can now safely invoke cleanup_srcu_struct(), which
> > > > > avoids the use-after-free scenario. And cleanup_srcu_struct_quiesced()
> > > > > is quite difficult to use safely. This commit therefore removes
> > > > > cleanup_srcu_struct_quiesced(), switching its sole user back to
> > > > > cleanup_srcu_struct(). This effectively reverts the following pair
> > > > > of commits:
> > > > >
> > > > > f7194ac32ca2 ("srcu: Add cleanup_srcu_struct_quiesced()")
> > > > > 4317228ad9b8 ("nvme: Avoid flush dependency in delete controller flow")
> > > > >
> > > > > Reported-by: Bart Van Assche <bvanassche at acm.org>
> > > > > Signed-off-by: Paul E. McKenney <paulmck at linux.ibm.com>
> > > > >
> > > > > [ ... ]
> > > >
> > > > Reviewed-by: Bart Van Assche <bvanassche at acm.org>
> > >
> > > Applied thank you!
> > >
> > > Looking forward to hearing the results of testing as well!
> >
> > The time during which I might reasonably push this into the upcoming
> > (v5.1) merge window is quickly drawing to a close. If you need this
> > before the v5.2 merge window, could you please let me know? If so,
> > a Tested-by would make things work much more smoothly.
>
> Hi Paul,
>
> Sorry that I had not yet reported that my tests pass with this patch applied.
> Feel free to add the following:
>
> Tested-by: Bart Van Assche <bvanassche at acm.org>
Applied, thank you!
But if you want me to try to push this into v5.1, I need you to very
explicitly tell me that you want me to do this. Sorry to be picky, but
my normal process cut off contributions to v5.0 more than a month ago,
and my usual position is that a backport to -stable covers almost all
use cases and reduces risk to those using mainline. Yes, RCU patches
do start off under a considerable cloud of suspicion. Which is one of
the reasons that RCU works at all. ;-)
So again, if you need me to try to push this into v5.1, I do need an
explicit request from you.
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-26 18:12 ` Paul E. McKenney
@ 2019-02-26 18:40 ` Bart Van Assche
2019-02-26 19:20 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-26 18:40 UTC (permalink / raw)
On Tue, 2019-02-26@10:12 -0800, Paul E. McKenney wrote:
> But if you want me to try to push this into v5.1, I need you to very
> explicitly tell me that you want me to do this. Sorry to be picky, but
> my normal process cut off contributions to v5.0 more than a month ago,
> and my usual position is that a backport to -stable covers almost all
> use cases and reduces risk to those using mainline. Yes, RCU patches
> do start off under a considerable cloud of suspicion. Which is one of
> the reasons that RCU works at all. ;-)
>
> So again, if you need me to try to push this into v5.1, I do need an
> explicit request from you.
Hi Paul,
If this patch will only be sent to Linus during the v5.2 merge window, will
a "Cc: stable # v..." tag be added to this patch that causes this patch to
be applied to kernel versions before v5.2 on which it is safe to apply this
patch?
Thanks,
Bart.
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-26 18:40 ` Bart Van Assche
@ 2019-02-26 19:20 ` Paul E. McKenney
2019-02-26 23:48 ` Bart Van Assche
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-26 19:20 UTC (permalink / raw)
On Tue, Feb 26, 2019@10:40:03AM -0800, Bart Van Assche wrote:
> On Tue, 2019-02-26@10:12 -0800, Paul E. McKenney wrote:
> > But if you want me to try to push this into v5.1, I need you to very
> > explicitly tell me that you want me to do this. Sorry to be picky, but
> > my normal process cut off contributions to v5.0 more than a month ago,
> > and my usual position is that a backport to -stable covers almost all
> > use cases and reduces risk to those using mainline. Yes, RCU patches
> > do start off under a considerable cloud of suspicion. Which is one of
> > the reasons that RCU works at all. ;-)
> >
> > So again, if you need me to try to push this into v5.1, I do need an
> > explicit request from you.
>
> Hi Paul,
>
> If this patch will only be sent to Linus during the v5.2 merge window, will
> a "Cc: stable # v..." tag be added to this patch that causes this patch to
> be applied to kernel versions before v5.2 on which it is safe to apply this
> patch?
I would prefer that, especially if you let me know which versions that
are important to you. ;-)
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-26 19:20 ` Paul E. McKenney
@ 2019-02-26 23:48 ` Bart Van Assche
2019-02-27 16:04 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-26 23:48 UTC (permalink / raw)
On Tue, 2019-02-26@11:20 -0800, Paul E. McKenney wrote:
> On Tue, Feb 26, 2019@10:40:03AM -0800, Bart Van Assche wrote:
> > On Tue, 2019-02-26@10:12 -0800, Paul E. McKenney wrote:
> > > But if you want me to try to push this into v5.1, I need you to very
> > > explicitly tell me that you want me to do this. Sorry to be picky, but
> > > my normal process cut off contributions to v5.0 more than a month ago,
> > > and my usual position is that a backport to -stable covers almost all
> > > use cases and reduces risk to those using mainline. Yes, RCU patches
> > > do start off under a considerable cloud of suspicion. Which is one of
> > > the reasons that RCU works at all. ;-)
> > >
> > > So again, if you need me to try to push this into v5.1, I do need an
> > > explicit request from you.
> >
> > Hi Paul,
> >
> > If this patch will only be sent to Linus during the v5.2 merge window, will
> > a "Cc: stable # v..." tag be added to this patch that causes this patch to
> > be applied to kernel versions before v5.2 on which it is safe to apply this
> > patch?
>
> I would prefer that, especially if you let me know which versions that
> are important to you. ;-)
Hi Paul,
Is this the commit that introduced WQ_MEM_RECLAIM queues for SRCU?
ad7c946b35ad ("rcu: Create RCU-specific workqueues with rescuers") # v4.17
Since the commit earlier in this e-mail thread reverts changes introduced in
kernel v4.18 I propose to request the stable tree maintainers to backport
this patch to the v4.18 and later stable kernel trees.
Thanks,
Bart.
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-26 23:48 ` Bart Van Assche
@ 2019-02-27 16:04 ` Paul E. McKenney
2019-02-27 16:25 ` Bart Van Assche
0 siblings, 1 reply; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-27 16:04 UTC (permalink / raw)
On Tue, Feb 26, 2019@03:48:07PM -0800, Bart Van Assche wrote:
> On Tue, 2019-02-26@11:20 -0800, Paul E. McKenney wrote:
> > On Tue, Feb 26, 2019@10:40:03AM -0800, Bart Van Assche wrote:
> > > On Tue, 2019-02-26@10:12 -0800, Paul E. McKenney wrote:
> > > > But if you want me to try to push this into v5.1, I need you to very
> > > > explicitly tell me that you want me to do this. Sorry to be picky, but
> > > > my normal process cut off contributions to v5.0 more than a month ago,
> > > > and my usual position is that a backport to -stable covers almost all
> > > > use cases and reduces risk to those using mainline. Yes, RCU patches
> > > > do start off under a considerable cloud of suspicion. Which is one of
> > > > the reasons that RCU works at all. ;-)
> > > >
> > > > So again, if you need me to try to push this into v5.1, I do need an
> > > > explicit request from you.
> > >
> > > Hi Paul,
> > >
> > > If this patch will only be sent to Linus during the v5.2 merge window, will
> > > a "Cc: stable # v..." tag be added to this patch that causes this patch to
> > > be applied to kernel versions before v5.2 on which it is safe to apply this
> > > patch?
> >
> > I would prefer that, especially if you let me know which versions that
> > are important to you. ;-)
>
> Hi Paul,
>
> Is this the commit that introduced WQ_MEM_RECLAIM queues for SRCU?
>
> ad7c946b35ad ("rcu: Create RCU-specific workqueues with rescuers") # v4.17
>
> Since the commit earlier in this e-mail thread reverts changes introduced in
> kernel v4.18 I propose to request the stable tree maintainers to backport
> this patch to the v4.18 and later stable kernel trees.
That is the one! Hmmm... Looks like these have to be backported by hand.
Or am I just confused this morning?
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-27 16:04 ` Paul E. McKenney
@ 2019-02-27 16:25 ` Bart Van Assche
2019-02-27 18:22 ` Paul E. McKenney
0 siblings, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2019-02-27 16:25 UTC (permalink / raw)
On Wed, 2019-02-27@08:04 -0800, Paul E. McKenney wrote:
> On Tue, Feb 26, 2019@03:48:07PM -0800, Bart Van Assche wrote:
> > On Tue, 2019-02-26@11:20 -0800, Paul E. McKenney wrote:
> > > On Tue, Feb 26, 2019@10:40:03AM -0800, Bart Van Assche wrote:
> > > > On Tue, 2019-02-26@10:12 -0800, Paul E. McKenney wrote:
> > > > > But if you want me to try to push this into v5.1, I need you to very
> > > > > explicitly tell me that you want me to do this. Sorry to be picky, but
> > > > > my normal process cut off contributions to v5.0 more than a month ago,
> > > > > and my usual position is that a backport to -stable covers almost all
> > > > > use cases and reduces risk to those using mainline. Yes, RCU patches
> > > > > do start off under a considerable cloud of suspicion. Which is one of
> > > > > the reasons that RCU works at all. ;-)
> > > > >
> > > > > So again, if you need me to try to push this into v5.1, I do need an
> > > > > explicit request from you.
> > > >
> > > > Hi Paul,
> > > >
> > > > If this patch will only be sent to Linus during the v5.2 merge window, will
> > > > a "Cc: stable # v..." tag be added to this patch that causes this patch to
> > > > be applied to kernel versions before v5.2 on which it is safe to apply this
> > > > patch?
> > >
> > > I would prefer that, especially if you let me know which versions that
> > > are important to you. ;-)
> >
> > Hi Paul,
> >
> > Is this the commit that introduced WQ_MEM_RECLAIM queues for SRCU?
> >
> > ad7c946b35ad ("rcu: Create RCU-specific workqueues with rescuers") # v4.17
> >
> > Since the commit earlier in this e-mail thread reverts changes introduced in
> > kernel v4.18 I propose to request the stable tree maintainers to backport
> > this patch to the v4.18 and later stable kernel trees.
>
> That is the one! Hmmm... Looks like these have to be backported by hand.
> Or am I just confused this morning?
Hi Paul,
In my e-mail I was referring to sending only commit c0bd8bc59c77 ("srcu: Remove
cleanup_srcu_struct_quiesced()") to the stable kernel tree maintainers. Are you
perhaps referring to another commit?
Thanks,
Bart.
^ permalink raw reply [flat|nested] 35+ messages in thread
* v5.0-rc2 and NVMeOF
2019-02-27 16:25 ` Bart Van Assche
@ 2019-02-27 18:22 ` Paul E. McKenney
0 siblings, 0 replies; 35+ messages in thread
From: Paul E. McKenney @ 2019-02-27 18:22 UTC (permalink / raw)
On Wed, Feb 27, 2019@08:25:50AM -0800, Bart Van Assche wrote:
> On Wed, 2019-02-27@08:04 -0800, Paul E. McKenney wrote:
> > On Tue, Feb 26, 2019@03:48:07PM -0800, Bart Van Assche wrote:
> > > On Tue, 2019-02-26@11:20 -0800, Paul E. McKenney wrote:
> > > > On Tue, Feb 26, 2019@10:40:03AM -0800, Bart Van Assche wrote:
> > > > > On Tue, 2019-02-26@10:12 -0800, Paul E. McKenney wrote:
> > > > > > But if you want me to try to push this into v5.1, I need you to very
> > > > > > explicitly tell me that you want me to do this. Sorry to be picky, but
> > > > > > my normal process cut off contributions to v5.0 more than a month ago,
> > > > > > and my usual position is that a backport to -stable covers almost all
> > > > > > use cases and reduces risk to those using mainline. Yes, RCU patches
> > > > > > do start off under a considerable cloud of suspicion. Which is one of
> > > > > > the reasons that RCU works at all. ;-)
> > > > > >
> > > > > > So again, if you need me to try to push this into v5.1, I do need an
> > > > > > explicit request from you.
> > > > >
> > > > > Hi Paul,
> > > > >
> > > > > If this patch will only be sent to Linus during the v5.2 merge window, will
> > > > > a "Cc: stable # v..." tag be added to this patch that causes this patch to
> > > > > be applied to kernel versions before v5.2 on which it is safe to apply this
> > > > > patch?
> > > >
> > > > I would prefer that, especially if you let me know which versions that
> > > > are important to you. ;-)
> > >
> > > Hi Paul,
> > >
> > > Is this the commit that introduced WQ_MEM_RECLAIM queues for SRCU?
> > >
> > > ad7c946b35ad ("rcu: Create RCU-specific workqueues with rescuers") # v4.17
> > >
> > > Since the commit earlier in this e-mail thread reverts changes introduced in
> > > kernel v4.18 I propose to request the stable tree maintainers to backport
> > > this patch to the v4.18 and later stable kernel trees.
> >
> > That is the one! Hmmm... Looks like these have to be backported by hand.
> > Or am I just confused this morning?
>
> Hi Paul,
>
> In my e-mail I was referring to sending only commit c0bd8bc59c77 ("srcu: Remove
> cleanup_srcu_struct_quiesced()") to the stable kernel tree maintainers. Are you
> perhaps referring to another commit?
Hello, Bart,
I am not having much luck automatically applying either of those two
commits. Perhaps pilot error. Does it work for you?
Ah, I back-ported that patch for you, didn't I? If so would you be willing
to take care of sending it to -stable once c0bd8bc59c77 ("srcu: Remove
cleanup_srcu_struct_quiesced()") hits mainline?
Thanx, Paul
^ permalink raw reply [flat|nested] 35+ messages in thread
end of thread, other threads:[~2019-02-27 18:22 UTC | newest]
Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-15 19:07 v5.0-rc2 and NVMeOF Bart Van Assche
2019-01-17 1:16 ` Sagi Grimberg
2019-02-11 17:24 ` Bart Van Assche
2019-02-11 21:08 ` Paul E. McKenney
2019-02-11 22:27 ` Bart Van Assche
2019-02-12 1:24 ` Paul E. McKenney
2019-02-12 16:47 ` Bart Van Assche
2019-02-12 17:47 ` Paul E. McKenney
2019-02-12 19:15 ` Paul E. McKenney
2019-02-13 0:44 ` Bart Van Assche
2019-02-13 1:10 ` Paul E. McKenney
2019-02-13 15:19 ` Paul E. McKenney
2019-02-13 15:24 ` Paul E. McKenney
2019-02-13 18:36 ` Bart Van Assche
2019-02-13 18:48 ` Paul E. McKenney
2019-02-13 19:12 ` Bart Van Assche
2019-02-13 19:30 ` Paul E. McKenney
2019-02-13 19:52 ` Paul E. McKenney
2019-02-13 21:00 ` Bart Van Assche
2019-02-13 22:09 ` Paul E. McKenney
2019-02-13 23:07 ` Paul E. McKenney
2019-02-14 0:21 ` Bart Van Assche
2019-02-14 1:02 ` Paul E. McKenney
2019-02-26 17:35 ` Paul E. McKenney
2019-02-26 17:47 ` Bart Van Assche
2019-02-26 18:12 ` Paul E. McKenney
2019-02-26 18:40 ` Bart Van Assche
2019-02-26 19:20 ` Paul E. McKenney
2019-02-26 23:48 ` Bart Van Assche
2019-02-27 16:04 ` Paul E. McKenney
2019-02-27 16:25 ` Bart Van Assche
2019-02-27 18:22 ` Paul E. McKenney
2019-02-13 19:13 ` Paul E. McKenney
2019-02-13 0:47 ` Bart Van Assche
2019-02-13 1:07 ` Paul E. McKenney
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.