* [PATCH] drm/i915/psr: Bump vblank evasion time for seamless updates
@ 2019-02-13 16:21 Chris Wilson
2019-02-13 16:30 ` Ville Syrjälä
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Chris Wilson @ 2019-02-13 16:21 UTC (permalink / raw)
To: intel-gfx; +Cc: Jani Nikula, Paulo Zanoni
Each set of registers we need to rewrite during a pageflip/modeset
increases the required evasion window. Modesets with PSR enabled
empirically take up to 350us to complete the register programming, so
provide a corresponding boost to the evasion window.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105870
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
---
drivers/gpu/drm/i915/intel_sprite.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 610398607e8e..03cafb953538 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -84,14 +84,30 @@ void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)
intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI);
DEFINE_WAIT(wait);
u32 psr_status;
+ int evasion;
vblank_start = adjusted_mode->crtc_vblank_start;
if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
vblank_start = DIV_ROUND_UP(vblank_start, 2);
+ /*
+ * Estimate how long it will take to reprogram display registers.
+ *
+ * As we wish to avoid changing registers across the vblank to
+ * avoid register write tearing, where the new frame uses an incomplete
+ * mismash of state, we aim to complete our writes before the start
+ * of the vblank. So we must delay starting our writes until after our
+ * evasion window.
+ *
+ * Each additional bit of state adds a set of registers we need to
+ * reprogram, increasing our required evasion window.
+ */
+ evasion = VBLANK_EVASION_TIME_US;
+ if (dev_priv->psr.enabled || new_crtc_state->has_psr)
+ evasion += 300;
+
/* FIXME needs to be calibrated sensibly */
- min = vblank_start - intel_usecs_to_scanlines(adjusted_mode,
- VBLANK_EVASION_TIME_US);
+ min = vblank_start - intel_usecs_to_scanlines(adjusted_mode, evasion);
max = vblank_start - 1;
if (min <= 0 || max <= 0)
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] drm/i915/psr: Bump vblank evasion time for seamless updates
2019-02-13 16:21 [PATCH] drm/i915/psr: Bump vblank evasion time for seamless updates Chris Wilson
@ 2019-02-13 16:30 ` Ville Syrjälä
2019-02-13 16:34 ` Chris Wilson
2019-02-14 12:49 ` ✓ Fi.CI.BAT: success for " Patchwork
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Ville Syrjälä @ 2019-02-13 16:30 UTC (permalink / raw)
To: Chris Wilson; +Cc: Jani Nikula, intel-gfx, Paulo Zanoni
On Wed, Feb 13, 2019 at 04:21:42PM +0000, Chris Wilson wrote:
> Each set of registers we need to rewrite during a pageflip/modeset
> increases the required evasion window. Modesets with PSR enabled
> empirically take up to 350us to complete the register programming, so
> provide a corresponding boost to the evasion window.
We should have exited PSR before the evasion. Is that code not working?
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105870
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> Cc: Jose Roberto de Souza <jose.souza@intel.com>
> ---
> drivers/gpu/drm/i915/intel_sprite.c | 20 ++++++++++++++++++--
> 1 file changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index 610398607e8e..03cafb953538 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -84,14 +84,30 @@ void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)
> intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI);
> DEFINE_WAIT(wait);
> u32 psr_status;
> + int evasion;
>
> vblank_start = adjusted_mode->crtc_vblank_start;
> if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
> vblank_start = DIV_ROUND_UP(vblank_start, 2);
>
> + /*
> + * Estimate how long it will take to reprogram display registers.
> + *
> + * As we wish to avoid changing registers across the vblank to
> + * avoid register write tearing, where the new frame uses an incomplete
> + * mismash of state, we aim to complete our writes before the start
> + * of the vblank. So we must delay starting our writes until after our
> + * evasion window.
> + *
> + * Each additional bit of state adds a set of registers we need to
> + * reprogram, increasing our required evasion window.
> + */
> + evasion = VBLANK_EVASION_TIME_US;
> + if (dev_priv->psr.enabled || new_crtc_state->has_psr)
> + evasion += 300;
> +
> /* FIXME needs to be calibrated sensibly */
> - min = vblank_start - intel_usecs_to_scanlines(adjusted_mode,
> - VBLANK_EVASION_TIME_US);
> + min = vblank_start - intel_usecs_to_scanlines(adjusted_mode, evasion);
> max = vblank_start - 1;
>
> if (min <= 0 || max <= 0)
> --
> 2.20.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] drm/i915/psr: Bump vblank evasion time for seamless updates
2019-02-13 16:30 ` Ville Syrjälä
@ 2019-02-13 16:34 ` Chris Wilson
0 siblings, 0 replies; 6+ messages in thread
From: Chris Wilson @ 2019-02-13 16:34 UTC (permalink / raw)
To: Ville Syrjälä; +Cc: Jani Nikula, intel-gfx, Paulo Zanoni
Quoting Ville Syrjälä (2019-02-13 16:30:10)
> On Wed, Feb 13, 2019 at 04:21:42PM +0000, Chris Wilson wrote:
> > Each set of registers we need to rewrite during a pageflip/modeset
> > increases the required evasion window. Modesets with PSR enabled
> > empirically take up to 350us to complete the register programming, so
> > provide a corresponding boost to the evasion window.
>
> We should have exited PSR before the evasion. Is that code not working?
I'm just correlating the reports that with PSR we get more missed vblank
evasion warnings; iirc CI showed the same when it was force enabled.
It was a neat theory to start explaining how to decide how high an
evasion time we require.
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread
* ✓ Fi.CI.BAT: success for drm/i915/psr: Bump vblank evasion time for seamless updates
2019-02-13 16:21 [PATCH] drm/i915/psr: Bump vblank evasion time for seamless updates Chris Wilson
2019-02-13 16:30 ` Ville Syrjälä
@ 2019-02-14 12:49 ` Patchwork
2019-02-14 12:50 ` [PATCH] " Chris Wilson
2019-02-14 15:44 ` ✓ Fi.CI.IGT: success for " Patchwork
3 siblings, 0 replies; 6+ messages in thread
From: Patchwork @ 2019-02-14 12:49 UTC (permalink / raw)
To: intel-gfx
== Series Details ==
Series: drm/i915/psr: Bump vblank evasion time for seamless updates
URL : https://patchwork.freedesktop.org/series/56618/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5599 -> Patchwork_12215
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/56618/revisions/1/mbox/
Known issues
------------
Here are the changes found in Patchwork_12215 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@userptr:
- fi-kbl-8809g: PASS -> DMESG-WARN [fdo#108965]
* igt@gem_exec_suspend@basic-s3:
- fi-blb-e6850: PASS -> INCOMPLETE [fdo#107718]
* igt@i915_module_load@reload-with-fault-injection:
- fi-kbl-7567u: PASS -> DMESG-WARN [fdo#105602] / [fdo#108529] +1
* igt@kms_chamelium@common-hpd-after-suspend:
- fi-kbl-7500u: NOTRUN -> DMESG-WARN [fdo#102505] / [fdo#103558] / [fdo#105079] / [fdo#105602]
- fi-kbl-7567u: PASS -> DMESG-WARN [fdo#103558] / [fdo#105079] / [fdo#105602]
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: NOTRUN -> FAIL [fdo#109485]
* igt@pm_rpm@basic-rte:
- fi-bsw-kefka: NOTRUN -> FAIL [fdo#108800]
* igt@pm_rpm@module-reload:
- fi-kbl-7567u: PASS -> DMESG-WARN [fdo#108529]
#### Possible fixes ####
* igt@i915_selftest@live_execlists:
- fi-apl-guc: INCOMPLETE [fdo#103927] -> PASS
* igt@i915_selftest@live_workarounds:
- {fi-icl-u2}: INCOMPLETE [fdo#109626] -> PASS
* igt@kms_busy@basic-flip-a:
- fi-gdg-551: FAIL [fdo#103182] -> PASS
* igt@kms_chamelium@dp-crc-fast:
- fi-kbl-7500u: DMESG-FAIL [fdo#109627] -> PASS
* igt@kms_flip@basic-flip-vs-dpms:
- fi-skl-6700hq: DMESG-WARN [fdo#105998] -> PASS
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- fi-byt-clapper: FAIL [fdo#103191] / [fdo#107362] -> PASS +2
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#102505]: https://bugs.freedesktop.org/show_bug.cgi?id=102505
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#105079]: https://bugs.freedesktop.org/show_bug.cgi?id=105079
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#105998]: https://bugs.freedesktop.org/show_bug.cgi?id=105998
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#107383]: https://bugs.freedesktop.org/show_bug.cgi?id=107383
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108529]: https://bugs.freedesktop.org/show_bug.cgi?id=108529
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#108800]: https://bugs.freedesktop.org/show_bug.cgi?id=108800
[fdo#108965]: https://bugs.freedesktop.org/show_bug.cgi?id=108965
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109294]: https://bugs.freedesktop.org/show_bug.cgi?id=109294
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109485]: https://bugs.freedesktop.org/show_bug.cgi?id=109485
[fdo#109527]: https://bugs.freedesktop.org/show_bug.cgi?id=109527
[fdo#109528]: https://bugs.freedesktop.org/show_bug.cgi?id=109528
[fdo#109530]: https://bugs.freedesktop.org/show_bug.cgi?id=109530
[fdo#109626]: https://bugs.freedesktop.org/show_bug.cgi?id=109626
[fdo#109627]: https://bugs.freedesktop.org/show_bug.cgi?id=109627
Participating hosts (43 -> 44)
------------------------------
Additional (7): fi-skl-6260u fi-whl-u fi-ivb-3770 fi-icl-y fi-kbl-7560u fi-bsw-kefka fi-snb-2600
Missing (6): fi-kbl-soraka fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-icl-u3 fi-bdw-samus
Build changes
-------------
* Linux: CI_DRM_5599 -> Patchwork_12215
CI_DRM_5599: 39119c9b385742d49446c25d6902864a60eda6b6 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4824: e55d439a9ba744227fb4c9d727338276b78871d4 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12215: 56e260420722bf47448f0a38cb702c5a09076d55 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
56e260420722 drm/i915/psr: Bump vblank evasion time for seamless updates
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12215/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] drm/i915/psr: Bump vblank evasion time for seamless updates
2019-02-13 16:21 [PATCH] drm/i915/psr: Bump vblank evasion time for seamless updates Chris Wilson
2019-02-13 16:30 ` Ville Syrjälä
2019-02-14 12:49 ` ✓ Fi.CI.BAT: success for " Patchwork
@ 2019-02-14 12:50 ` Chris Wilson
2019-02-14 15:44 ` ✓ Fi.CI.IGT: success for " Patchwork
3 siblings, 0 replies; 6+ messages in thread
From: Chris Wilson @ 2019-02-14 12:50 UTC (permalink / raw)
To: intel-gfx; +Cc: Jani Nikula, Paulo Zanoni
Quoting Chris Wilson (2019-02-13 16:21:42)
> Each set of registers we need to rewrite during a pageflip/modeset
> increases the required evasion window. Modesets with PSR enabled
> empirically take up to 350us to complete the register programming, so
> provide a corresponding boost to the evasion window.
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105870
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> Cc: Jose Roberto de Souza <jose.souza@intel.com>
> ---
> drivers/gpu/drm/i915/intel_sprite.c | 20 ++++++++++++++++++--
> 1 file changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index 610398607e8e..03cafb953538 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -84,14 +84,30 @@ void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)
> intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI);
> DEFINE_WAIT(wait);
> u32 psr_status;
> + int evasion;
>
> vblank_start = adjusted_mode->crtc_vblank_start;
> if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
> vblank_start = DIV_ROUND_UP(vblank_start, 2);
>
> + /*
> + * Estimate how long it will take to reprogram display registers.
> + *
> + * As we wish to avoid changing registers across the vblank to
> + * avoid register write tearing, where the new frame uses an incomplete
> + * mismash of state, we aim to complete our writes before the start
> + * of the vblank. So we must delay starting our writes until after our
> + * evasion window.
> + *
> + * Each additional bit of state adds a set of registers we need to
> + * reprogram, increasing our required evasion window.
> + */
> + evasion = VBLANK_EVASION_TIME_US;
> + if (dev_priv->psr.enabled || new_crtc_state->has_psr)
> + evasion += 300;
> +
> /* FIXME needs to be calibrated sensibly */
In terms of calibration, how about we couple the measured time back for
use as evasion? Say use libavg so we adjust to different setups plus a
safety factor, and reduce the error message to a warning/debug?
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread
* ✓ Fi.CI.IGT: success for drm/i915/psr: Bump vblank evasion time for seamless updates
2019-02-13 16:21 [PATCH] drm/i915/psr: Bump vblank evasion time for seamless updates Chris Wilson
` (2 preceding siblings ...)
2019-02-14 12:50 ` [PATCH] " Chris Wilson
@ 2019-02-14 15:44 ` Patchwork
3 siblings, 0 replies; 6+ messages in thread
From: Patchwork @ 2019-02-14 15:44 UTC (permalink / raw)
To: intel-gfx
== Series Details ==
Series: drm/i915/psr: Bump vblank evasion time for seamless updates
URL : https://patchwork.freedesktop.org/series/56618/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5599_full -> Patchwork_12215_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_12215_full:
### IGT changes ###
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses.
They do not affect the overall result.
* {igt@runner@aborted}:
- shard-iclb: ( 17 FAIL ) [fdo#108654] / [fdo#108756] / [fdo#109624] -> ( 16 FAIL ) [fdo#109624]
Known issues
------------
Here are the changes found in Patchwork_12215_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_eio@unwedge-stress:
- shard-snb: PASS -> FAIL [fdo#107799]
* igt@i915_selftest@live_hangcheck:
- shard-iclb: PASS -> INCOMPLETE [fdo#108569]
* igt@i915_suspend@debugfs-reader:
- shard-iclb: NOTRUN -> FAIL [fdo#103375] +2
* igt@i915_suspend@forcewake:
- shard-iclb: PASS -> FAIL [fdo#103375] +3
* igt@kms_busy@extended-modeset-hang-newfb-render-a:
- shard-iclb: NOTRUN -> DMESG-WARN [fdo#107956]
* igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-b:
- shard-glk: PASS -> DMESG-WARN [fdo#107956]
* igt@kms_cursor_crc@cursor-128x128-sliding:
- shard-iclb: NOTRUN -> FAIL [fdo#103232]
* igt@kms_cursor_crc@cursor-256x85-random:
- shard-apl: PASS -> FAIL [fdo#103232] +1
* igt@kms_draw_crc@draw-method-rgb565-pwrite-xtiled:
- shard-glk: PASS -> FAIL [fdo#103184]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-move:
- shard-apl: PASS -> FAIL [fdo#103167] +1
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-render:
- shard-apl: NOTRUN -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-1p-rte:
- shard-apl: PASS -> FAIL [fdo#103167] / [fdo#105682]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-draw-pwrite:
- shard-iclb: PASS -> FAIL [fdo#103167]
* igt@kms_plane@pixel-format-pipe-a-planes-source-clamping:
- shard-apl: PASS -> FAIL [fdo#108948]
* igt@kms_plane_alpha_blend@pipe-a-alpha-transparant-fb:
- shard-apl: NOTRUN -> FAIL [fdo#108145]
- shard-kbl: NOTRUN -> FAIL [fdo#108145]
* igt@kms_plane_multiple@atomic-pipe-b-tiling-x:
- shard-glk: PASS -> FAIL [fdo#103166]
- shard-apl: PASS -> FAIL [fdo#103166]
- shard-iclb: PASS -> FAIL [fdo#103166]
* igt@kms_plane_scaling@pipe-b-scaler-with-rotation:
- shard-iclb: NOTRUN -> DMESG-WARN [fdo#107724]
* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> FAIL [fdo#100047]
- shard-kbl: NOTRUN -> FAIL [fdo#100047]
* igt@pm_rpm@gem-pread:
- shard-iclb: PASS -> DMESG-WARN [fdo#107724]
#### Possible fixes ####
* igt@gem_eio@reset-stress:
- shard-snb: FAIL [fdo#107799] -> PASS
* igt@i915_selftest@live_workarounds:
- shard-iclb: DMESG-FAIL [fdo#108954] -> PASS
* igt@kms_color@pipe-b-legacy-gamma:
- shard-apl: FAIL [fdo#104782] -> PASS
* igt@kms_cursor_crc@cursor-256x85-sliding:
- shard-apl: FAIL [fdo#103232] -> PASS +2
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-apl: FAIL [fdo#103167] -> PASS +1
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-spr-indfb-fullscreen:
- shard-iclb: FAIL [fdo#103167] -> PASS
* igt@kms_plane@pixel-format-pipe-c-planes-source-clamping:
- shard-glk: FAIL [fdo#108948] -> PASS
- shard-apl: INCOMPLETE [fdo#103927] -> PASS
* igt@kms_plane_multiple@atomic-pipe-b-tiling-none:
- shard-apl: FAIL [fdo#103166] -> PASS +2
* igt@kms_plane_multiple@atomic-pipe-b-tiling-y:
- shard-iclb: FAIL [fdo#103166] -> PASS +1
* igt@kms_plane_multiple@atomic-pipe-c-tiling-x:
- shard-glk: FAIL [fdo#103166] -> PASS
* igt@kms_rotation_crc@multiplane-rotation-cropping-bottom:
- shard-kbl: DMESG-FAIL [fdo#105763] -> PASS
* igt@kms_rotation_crc@multiplane-rotation-cropping-top:
- shard-kbl: FAIL [fdo#109016] -> PASS
* igt@kms_setmode@basic:
- shard-apl: FAIL [fdo#99912] -> PASS
* igt@pm_rpm@gem-evict-pwrite:
- shard-iclb: DMESG-WARN [fdo#107724] -> PASS +5
* igt@pm_rpm@legacy-planes:
- shard-iclb: DMESG-WARN [fdo#107732] -> PASS
* igt@tools_test@tools_test:
- shard-iclb: {SKIP} [fdo#109352] -> PASS
#### Warnings ####
* igt@i915_suspend@shrink:
- shard-apl: INCOMPLETE [fdo#103927] / [fdo#106886] -> DMESG-WARN [fdo#107886] / [fdo#109244]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#100047]: https://bugs.freedesktop.org/show_bug.cgi?id=100047
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103184]: https://bugs.freedesktop.org/show_bug.cgi?id=103184
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
[fdo#105682]: https://bugs.freedesktop.org/show_bug.cgi?id=105682
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#106886]: https://bugs.freedesktop.org/show_bug.cgi?id=106886
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#107732]: https://bugs.freedesktop.org/show_bug.cgi?id=107732
[fdo#107799]: https://bugs.freedesktop.org/show_bug.cgi?id=107799
[fdo#107886]: https://bugs.freedesktop.org/show_bug.cgi?id=107886
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#108654]: https://bugs.freedesktop.org/show_bug.cgi?id=108654
[fdo#108756]: https://bugs.freedesktop.org/show_bug.cgi?id=108756
[fdo#108948]: https://bugs.freedesktop.org/show_bug.cgi?id=108948
[fdo#108954]: https://bugs.freedesktop.org/show_bug.cgi?id=108954
[fdo#109016]: https://bugs.freedesktop.org/show_bug.cgi?id=109016
[fdo#109244]: https://bugs.freedesktop.org/show_bug.cgi?id=109244
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109277]: https://bugs.freedesktop.org/show_bug.cgi?id=109277
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109281]: https://bugs.freedesktop.org/show_bug.cgi?id=109281
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109287]: https://bugs.freedesktop.org/show_bug.cgi?id=109287
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109352]: https://bugs.freedesktop.org/show_bug.cgi?id=109352
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109624]: https://bugs.freedesktop.org/show_bug.cgi?id=109624
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (7 -> 6)
------------------------------
Missing (1): shard-skl
Build changes
-------------
* Linux: CI_DRM_5599 -> Patchwork_12215
CI_DRM_5599: 39119c9b385742d49446c25d6902864a60eda6b6 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4824: e55d439a9ba744227fb4c9d727338276b78871d4 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12215: 56e260420722bf47448f0a38cb702c5a09076d55 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12215/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-02-14 15:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-13 16:21 [PATCH] drm/i915/psr: Bump vblank evasion time for seamless updates Chris Wilson
2019-02-13 16:30 ` Ville Syrjälä
2019-02-13 16:34 ` Chris Wilson
2019-02-14 12:49 ` ✓ Fi.CI.BAT: success for " Patchwork
2019-02-14 12:50 ` [PATCH] " Chris Wilson
2019-02-14 15:44 ` ✓ Fi.CI.IGT: success for " Patchwork
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.