* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) [not found] <73216487-9ed5-4492-b7c6-b757fdb3b566@Mail> @ 2019-02-24 0:44 ` Ernesto A. Fernández 2019-02-26 3:32 ` tchou 0 siblings, 1 reply; 14+ messages in thread From: Ernesto A. Fernández @ 2019-02-24 0:44 UTC (permalink / raw) To: tchou; +Cc: linux-fsdevel Hi, On Sat, Feb 23, 2019 at 04:19:23PM +0800, tchou wrote: > Hi Ernesto, > > Sorry to disturb. No problem. > I'm investigating an HFS+ BUG. > The call trace is attached[1]. > > As you can see, the bnode is been free twice, > I suspect that the bug is ralative to this patch 19a9d0f1acf75e8be8cfba19c1a34e941846fa2b > (hfsplus: fix BUG on bnode parent update). Those messages you get are reporting an attempt to free on-disk bnodes that were already free. My patch was about bnode structures in memory, so it's not likely to be related. > > There are three questions: > 1. The commit message says "Creating, renaming or deleting a file may hit BUG_ON()". > Where is the BUG_ON() been triggered? Is that the same BUG_ON() in my call trace? The BUG_ON() from my patch was in hfs_bnode_put(). I don't think there is any BUG_ON() in your case, you are getting a general protection fault. > > 2. I run the script in your commit message, but I can not reproduce it. > Could you please tell me how many times in average it need to execute to trigger the bug? > I'm wondering if I took some mistake. The bug should be triggered after a single run. Did you revert the patch before? > > > 3. If my guess is wrong, this bug is unrelative to this patch, > do you have any idea on it? Or do you have faced the same bug of mine? This seems to be related to the xattr implementation, which is a mess. I think it would be best to rewrite it or get rid of it entirely... Ernesto > Thanks for your help! > > [1] > ================================================================================================== > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: trying to free free bnode 294912(2) > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: trying to free free bnode 294912(2) > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: trying to free free bnode 294912(2) > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general protection fault: 0000 [#1] SMP > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 PID: 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware name: Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 2017/05/09 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: 0018:ffff880270883c18 EFLAGS: 00010202 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) knlGS:0000000000000000 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc 0000000000001f9c > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] 0000000000000060 000000000000000e ffffffffa05146ff aeff000000000031 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] ffffffffa0516bf9 000000606228c340 ffff880270883cd0 00000000fffffffe > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call Trace: > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 [hfsplus] > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 [hfsplus] > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] [<ffffffff810fb827>] ? fput+0x57/0xb0 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 63 ca 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b 06 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 48 8d 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP <ffff880270883c18> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end trace 0e65d1ee34a1e12e ]--- > > > ================================================================================================== > > > > Best regards, > Ting-Chang Hou #8487 > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-02-24 0:44 ` The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) Ernesto A. Fernández @ 2019-02-26 3:32 ` tchou 2019-02-26 18:01 ` Viacheslav Dubeyko 0 siblings, 1 reply; 14+ messages in thread From: tchou @ 2019-02-26 3:32 UTC (permalink / raw) To: Ernesto A. Fernández; +Cc: linux-fsdevel, linux-fsdevel-owner Ernesto A. Fernández 於 2019-02-24 08:44 寫到: > Hi, > > On Sat, Feb 23, 2019 at 04:19:23PM +0800, tchou wrote: >> Hi Ernesto, >> >> Sorry to disturb. > > No problem. > >> I'm investigating an HFS+ BUG. >> The call trace is attached[1]. >> >> As you can see, the bnode is been free twice, >> I suspect that the bug is ralative to this patch >> 19a9d0f1acf75e8be8cfba19c1a34e941846fa2b >> (hfsplus: fix BUG on bnode parent update). > > Those messages you get are reporting an attempt to free on-disk bnodes > that > were already free. My patch was about bnode structures in memory, so > it's > not likely to be related. > >> >> There are three questions: >> 1. The commit message says "Creating, renaming or deleting a file may >> hit BUG_ON()". >> Where is the BUG_ON() been triggered? Is that the same BUG_ON() in my >> call trace? > > The BUG_ON() from my patch was in hfs_bnode_put(). I don't think there > is any > BUG_ON() in your case, you are getting a general protection fault. > >> >> 2. I run the script in your commit message, but I can not reproduce >> it. >> Could you please tell me how many times in average it need to execute >> to trigger the bug? >> I'm wondering if I took some mistake. > > The bug should be triggered after a single run. Did you revert the > patch > before? > >> >> >> 3. If my guess is wrong, this bug is unrelative to this patch, >> do you have any idea on it? Or do you have faced the same bug of mine? > > This seems to be related to the xattr implementation, which is a mess. > I think > it would be best to rewrite it or get rid of it entirely... Thanks for your reply! I will try to trace the code of xattr. > > Ernesto > >> Thanks for your help! >> >> [1] >> ================================================================================================== >> >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: >> trying to free free bnode 294912(2) >> >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: >> trying to free free bnode 294912(2) >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: >> trying to free free bnode 294912(2) >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general >> protection fault: 0000 [#1] SMP >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 PID: >> 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware name: >> Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 >> 2017/05/09 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: >> ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: >> 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] >> hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: >> 0018:ffff880270883c18 EFLAGS: 00010202 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: >> 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: >> 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: >> ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: >> ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: >> ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: >> 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) >> knlGS:0000000000000000 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 DS: >> 0000 ES: 0000 CR0: 000000008005003b >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: >> 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: >> 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: >> 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] >> ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc 0000000000001f9c >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] >> 0000000000000060 000000000000000e ffffffffa05146ff aeff000000000031 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] >> ffffffffa0516bf9 000000606228c340 ffff880270883cd0 00000000fffffffe >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call Trace: >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] >> [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 [hfsplus] >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] >> [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] >> [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] >> [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 [hfsplus] >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] >> [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] >> [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] >> [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] >> [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] >> [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] >> [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] >> [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] >> [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] >> [<ffffffff810fb827>] ? fput+0x57/0xb0 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] >> [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 63 ca >> 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b 06 >> 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 48 8d >> 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP >> [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP >> <ffff880270883c18> >> >> 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end trace >> 0e65d1ee34a1e12e ]--- >> >> >> ================================================================================================== >> >> >> >> Best regards, >> Ting-Chang Hou #8487 >> ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-02-26 3:32 ` tchou @ 2019-02-26 18:01 ` Viacheslav Dubeyko 2019-02-27 1:46 ` tchou 0 siblings, 1 reply; 14+ messages in thread From: Viacheslav Dubeyko @ 2019-02-26 18:01 UTC (permalink / raw) To: tchou, Ernesto A. Fernández Cc: linux-fsdevel, linux-fsdevel-owner, slava On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: > Ernesto A. Fernández 於 2019-02-24 08:44 寫到: > > > > [skipped] > > > > > > [1] > > > ================================================================= > > > ================================= > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: > > > trying to free free bnode 294912(2) > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: > > > trying to free free bnode 294912(2) > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: > > > trying to free free bnode 294912(2) > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general > > > protection fault: 0000 [#1] SMP > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 > > > PID: > > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware > > > name: > > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 > > > 2017/05/09 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: > > > ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: > > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] > > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: > > > 0018:ffff880270883c18 EFLAGS: 00010202 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: > > > 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: > > > 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: > > > ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: > > > ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: > > > ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: > > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) > > > knlGS:0000000000000000 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 > > > DS: > > > 0000 ES: 0000 CR0: 000000008005003b > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: > > > 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: > > > 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: > > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] > > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc > > > 0000000000001f9c > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] > > > 0000000000000060 000000000000000e ffffffffa05146ff > > > aeff000000000031 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] > > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 > > > 00000000fffffffe > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call > > > Trace: > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] > > > [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 > > > [hfsplus] > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] > > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] > > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] > > > [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 > > > [hfsplus] > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] > > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] > > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] > > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] > > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] > > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] > > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] > > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] > > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] > > > [<ffffffff810fb827>] ? fput+0x57/0xb0 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] > > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 > > > 63 ca > > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b > > > 06 > > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 > > > 48 8d > > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP > > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP > > > <ffff880270883c18> > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end > > > trace > > > 0e65d1ee34a1e12e ]--- > > > > > > > > > ================================================================= > > > ================================= > > > Could you please share more details about the environment of the bug? Do you know what operation trigger the bug? How had volume been created? Can you reproduce the issue? It looks like the file deletion operation took place. Do you have any idea what file is under deletion and what features it has? Does this file contain any xattr? Thanks, Vyacheslav Dubeyko. > > > > > > > > > Best regards, > > > Ting-Chang Hou #8487 > > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-02-26 18:01 ` Viacheslav Dubeyko @ 2019-02-27 1:46 ` tchou 2019-02-27 2:42 ` Viacheslav Dubeyko ` (2 more replies) 0 siblings, 3 replies; 14+ messages in thread From: tchou @ 2019-02-27 1:46 UTC (permalink / raw) To: Viacheslav Dubeyko Cc: "Ernesto A." Fernández, linux-fsdevel, linux-fsdevel-owner, slava Viacheslav Dubeyko 於 2019-02-27 02:01 寫到: > On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: >> Ernesto A. Fernández 於 2019-02-24 08:44 寫到: >> > >> > > > [skipped] > >> > > >> > > [1] >> > > ================================================================= >> > > ================================= >> > > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: >> > > trying to free free bnode 294912(2) >> > > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: >> > > trying to free free bnode 294912(2) >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: >> > > trying to free free bnode 294912(2) >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general >> > > protection fault: 0000 [#1] SMP >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 >> > > PID: >> > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware >> > > name: >> > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 >> > > 2017/05/09 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: >> > > ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: >> > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] >> > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: >> > > 0018:ffff880270883c18 EFLAGS: 00010202 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: >> > > 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: >> > > 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: >> > > ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: >> > > ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: >> > > ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: >> > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) >> > > knlGS:0000000000000000 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 >> > > DS: >> > > 0000 ES: 0000 CR0: 000000008005003b >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: >> > > 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: >> > > 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: >> > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] >> > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc >> > > 0000000000001f9c >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] >> > > 0000000000000060 000000000000000e ffffffffa05146ff >> > > aeff000000000031 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] >> > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 >> > > 00000000fffffffe >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call >> > > Trace: >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] >> > > [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 >> > > [hfsplus] >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] >> > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] >> > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] >> > > [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 >> > > [hfsplus] >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] >> > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] >> > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] >> > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] >> > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] >> > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] >> > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] >> > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] >> > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] >> > > [<ffffffff810fb827>] ? fput+0x57/0xb0 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] >> > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 >> > > 63 ca >> > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b >> > > 06 >> > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 >> > > 48 8d >> > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP >> > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP >> > > <ffff880270883c18> >> > > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end >> > > trace >> > > 0e65d1ee34a1e12e ]--- >> > > >> > > >> > > ================================================================= >> > > ================================= >> > > > > > Could you please share more details about the environment of the bug? > Do you know what operation trigger the bug? How had volume been > created? Can you reproduce the issue? > > It looks like the file deletion operation took place. Do you have any > idea what file is under deletion and what features it has? Does this > file contain any xattr? Ok, the following description is my situation. The Linux versions of our products are 3.10 and 4.4. Users may plug-in the external USB drive, whose hfs+ is formatted on their macOS device, to our device. They can do all file system operations(etc create, remove, rename files, and so on) on both macOS side and Linux side. The files created on macOS have the default xattr: com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAKrmU= The files created on Linux have no xattr. Some users seem enconter the call trace when removing the file on our device.And it will stock when we unmount it and cause the unmount fail. We cannot reproduce it by ourselves. The following link is the only one I can find that have the same situation of mine: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1646565/comments/5 I try some reproduce ways: 1. Format the USB drive on Linux and macOS. 2. Use fsstress to stress create and unlink operations on Linux. 3. Create and remove the 100,000 files on Linux. 4. Create 10,000 ~ 500,000 files on MacOS and remove all on Linux. All of ways failed. There are about 10+ users enconter this situation so I try to fix it. Any Idea about it? Thanks, Ting-Chang Hou > > Thanks, > Vyacheslav Dubeyko. > >> > > >> > > >> > > Best regards, >> > > Ting-Chang Hou #8487 >> > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-02-27 1:46 ` tchou @ 2019-02-27 2:42 ` Viacheslav Dubeyko 2019-02-27 2:56 ` Viacheslav Dubeyko 2019-02-27 3:10 ` Ernesto A. Fernández 2 siblings, 0 replies; 14+ messages in thread From: Viacheslav Dubeyko @ 2019-02-27 2:42 UTC (permalink / raw) To: tchou Cc: "Ernesto A." Fernández, linux-fsdevel, linux-fsdevel-owner, slava On Wed, 2019-02-27 at 09:46 +0800, tchou wrote: > Viacheslav Dubeyko 於 2019-02-27 02:01 寫到: > > On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: > >> Ernesto A. Fernández 於 2019-02-24 08:44 寫到: > >> > > >> > > > > > [skipped] > > > >> > > > >> > > [1] > >> > > ================================================================= > >> > > ================================= > >> > > > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: > >> > > trying to free free bnode 294912(2) > >> > > > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: > >> > > trying to free free bnode 294912(2) > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: > >> > > trying to free free bnode 294912(2) > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general > >> > > protection fault: 0000 [#1] SMP > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 > >> > > PID: > >> > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware > >> > > name: > >> > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 > >> > > 2017/05/09 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: > >> > > ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: > >> > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] > >> > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: > >> > > 0018:ffff880270883c18 EFLAGS: 00010202 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: > >> > > 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: > >> > > 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: > >> > > ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: > >> > > ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: > >> > > ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: > >> > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) > >> > > knlGS:0000000000000000 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 > >> > > DS: > >> > > 0000 ES: 0000 CR0: 000000008005003b > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: > >> > > 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: > >> > > 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: > >> > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] > >> > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc > >> > > 0000000000001f9c > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] > >> > > 0000000000000060 000000000000000e ffffffffa05146ff > >> > > aeff000000000031 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] > >> > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 > >> > > 00000000fffffffe > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call > >> > > Trace: > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] > >> > > [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 > >> > > [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] > >> > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] > >> > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] > >> > > [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 > >> > > [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] > >> > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] > >> > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] > >> > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] > >> > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] > >> > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] > >> > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] > >> > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] > >> > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] > >> > > [<ffffffff810fb827>] ? fput+0x57/0xb0 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] > >> > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 > >> > > 63 ca > >> > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b > >> > > 06 > >> > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 > >> > > 48 8d > >> > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP > >> > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP > >> > > <ffff880270883c18> > >> > > > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end > >> > > trace > >> > > 0e65d1ee34a1e12e ]--- > >> > > > >> > > > >> > > ================================================================= > >> > > ================================= > >> > > > > > > > > Could you please share more details about the environment of the bug? > > Do you know what operation trigger the bug? How had volume been > > created? Can you reproduce the issue? > > > > It looks like the file deletion operation took place. Do you have any > > idea what file is under deletion and what features it has? Does this > > file contain any xattr? > > Ok, the following description is my situation. The Linux versions of > our products are 3.10 and 4.4. > > Users may plug-in the external USB drive, whose hfs+ is formatted on > their macOS device, to our device. They can do all file system > operations(etc create, remove, rename files, and so on) on both > macOS side and Linux side. > > The files created on macOS have the default xattr: > com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAKrmU= > The files created on Linux have no xattr. > > Some users seem enconter the call trace when removing the file on > our device.And it will stock when we unmount it and cause the > unmount fail. > > We cannot reproduce it by ourselves. The following link is the > only one I can find that have the same situation of mine: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1646565/comments/5 > > I try some reproduce ways: > 1. Format the USB drive on Linux and macOS. > 2. Use fsstress to stress create and unlink operations on Linux. > 3. Create and remove the 100,000 files on Linux. > 4. Create 10,000 ~ 500,000 files on MacOS and remove all on Linux. > All of ways failed. > > There are about 10+ users enconter this situation so I try to fix it. > Any Idea about it? > OK. I see the point. Let's achieve the stable reproduction of the issue at first. The issue is triggered by operations in the Attributes Tree but not in the Catalog Tree. So, it will be enough to create the several files. The key trick is to create many xattrs for one file. It will be better to create xattrs by native way under Macx OS X. I believe that Attributes Tree's node size could be about 8 KB by default (but maybe 4 KB only). It is better to check the size in superblock's dump, for example. So, it needs to create a lot of xattrs for one file (or several files) with the goal to create the Attributes Tree with enough number of nodes. The best case will be to create the Attributes Tree with height of 2 or 3 with the goal to have the index nodes too. As far as I can judge, the issue can be reproduce during the deletion of the xattrs or file with xattrs under Linux. And it needs to have the Attributes Tree with many nodes because the issue should be triggered during the operation of the b-tree node deletion. So, I hope my vision could help. Could you please try to reproduce the issue and to share the results? Thanks, Vyacheslav Dubeyko. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-02-27 1:46 ` tchou 2019-02-27 2:42 ` Viacheslav Dubeyko @ 2019-02-27 2:56 ` Viacheslav Dubeyko 2019-02-27 3:14 ` tchou 2019-02-27 3:10 ` Ernesto A. Fernández 2 siblings, 1 reply; 14+ messages in thread From: Viacheslav Dubeyko @ 2019-02-27 2:56 UTC (permalink / raw) To: tchou Cc: "Ernesto A." Fernández, linux-fsdevel, linux-fsdevel-owner On Wed, 2019-02-27 at 09:46 +0800, tchou wrote: > Viacheslav Dubeyko 於 2019-02-27 02:01 寫到: > > On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: > >> Ernesto A. Fernández 於 2019-02-24 08:44 寫到: > >> > > >> > > > > > [skipped] > > > >> > > > >> > > [1] > >> > > ================================================================= > >> > > ================================= > >> > > > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: > >> > > trying to free free bnode 294912(2) > >> > > > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: > >> > > trying to free free bnode 294912(2) > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: > >> > > trying to free free bnode 294912(2) > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general > >> > > protection fault: 0000 [#1] SMP > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 > >> > > PID: > >> > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware > >> > > name: > >> > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 > >> > > 2017/05/09 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: > >> > > ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: > >> > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] > >> > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: > >> > > 0018:ffff880270883c18 EFLAGS: 00010202 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: > >> > > 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: > >> > > 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: > >> > > ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: > >> > > ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: > >> > > ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: > >> > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) > >> > > knlGS:0000000000000000 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 > >> > > DS: > >> > > 0000 ES: 0000 CR0: 000000008005003b > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: > >> > > 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: > >> > > 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: > >> > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] > >> > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc > >> > > 0000000000001f9c > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] > >> > > 0000000000000060 000000000000000e ffffffffa05146ff > >> > > aeff000000000031 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] > >> > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 > >> > > 00000000fffffffe > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call > >> > > Trace: > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] > >> > > [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 > >> > > [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] > >> > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] > >> > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] > >> > > [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 > >> > > [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] > >> > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] > >> > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] > >> > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] > >> > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] > >> > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] > >> > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] > >> > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] > >> > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] > >> > > [<ffffffff810fb827>] ? fput+0x57/0xb0 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] > >> > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 > >> > > 63 ca > >> > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b > >> > > 06 > >> > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 > >> > > 48 8d > >> > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP > >> > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP > >> > > <ffff880270883c18> > >> > > > >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end > >> > > trace > >> > > 0e65d1ee34a1e12e ]--- > >> > > > >> > > > >> > > ================================================================= > >> > > ================================= > >> > > > > > > > > Could you please share more details about the environment of the bug? > > Do you know what operation trigger the bug? How had volume been > > created? Can you reproduce the issue? > > > > It looks like the file deletion operation took place. Do you have any > > idea what file is under deletion and what features it has? Does this > > file contain any xattr? > > Ok, the following description is my situation. The Linux versions of > our products are 3.10 and 4.4. > > Users may plug-in the external USB drive, whose hfs+ is formatted on > their macOS device, to our device. They can do all file system > operations(etc create, remove, rename files, and so on) on both > macOS side and Linux side. > > The files created on macOS have the default xattr: > com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAKrmU= > The files created on Linux have no xattr. > > Some users seem enconter the call trace when removing the file on > our device.And it will stock when we unmount it and cause the > unmount fail. > > We cannot reproduce it by ourselves. The following link is the > only one I can find that have the same situation of mine: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1646565/comments/5 > > I try some reproduce ways: > 1. Format the USB drive on Linux and macOS. > 2. Use fsstress to stress create and unlink operations on Linux. > 3. Create and remove the 100,000 files on Linux. > 4. Create 10,000 ~ 500,000 files on MacOS and remove all on Linux. > All of ways failed. > > There are about 10+ users enconter this situation so I try to fix it. > Any Idea about it? OK. I see the point. Let's achieve the stable reproduction of the issue at first. The issue is triggered by operations in the Attributes Tree but not in the Catalog Tree. So, it will be enough to create the several files. The key trick is to create many xattrs for one file. It will be better to create xattrs by native way under Macx OS X. I believe that Attributes Tree's node size could be about 8 KB by default (but maybe 4 KB only). It is better to check the size in superblock's dump, for example. So, it needs to create a lot of xattrs for one file (or several files) with the goal to create the Attributes Tree with enough number of nodes. The best case will be to create the Attributes Tree with height of 2 or 3 with the goal to have the index nodes too. As far as I can judge, the issue can be reproduce during the deletion of the xattrs or file with xattrs under Linux. And it needs to have the Attributes Tree with many nodes because the issue should be triggered during the operation of the b-tree node deletion. So, I hope my vision could help. Could you please try to reproduce the issue and to share the results? Thanks, Vyacheslav Dubeyko. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-02-27 2:56 ` Viacheslav Dubeyko @ 2019-02-27 3:14 ` tchou 2019-03-04 7:45 ` tchou 0 siblings, 1 reply; 14+ messages in thread From: tchou @ 2019-02-27 3:14 UTC (permalink / raw) To: Viacheslav Dubeyko Cc: "\"Ernesto A.\"" Fernández, linux-fsdevel, linux-fsdevel-owner Viacheslav Dubeyko 於 2019-02-27 10:56 寫到: > On Wed, 2019-02-27 at 09:46 +0800, tchou wrote: >> Viacheslav Dubeyko 於 2019-02-27 02:01 寫到: >> > On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: >> >> Ernesto A. Fernández 於 2019-02-24 08:44 寫到: >> >> > >> >> > >> > >> > [skipped] >> > >> >> > > >> >> > > [1] >> >> > > ================================================================= >> >> > > ================================= >> >> > > >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: >> >> > > trying to free free bnode 294912(2) >> >> > > >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: >> >> > > trying to free free bnode 294912(2) >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: >> >> > > trying to free free bnode 294912(2) >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general >> >> > > protection fault: 0000 [#1] SMP >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 >> >> > > PID: >> >> > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware >> >> > > name: >> >> > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 >> >> > > 2017/05/09 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: >> >> > > ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: >> >> > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] >> >> > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: >> >> > > 0018:ffff880270883c18 EFLAGS: 00010202 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: >> >> > > 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: >> >> > > 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: >> >> > > ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: >> >> > > ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: >> >> > > ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: >> >> > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) >> >> > > knlGS:0000000000000000 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 >> >> > > DS: >> >> > > 0000 ES: 0000 CR0: 000000008005003b >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: >> >> > > 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: >> >> > > 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: >> >> > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] >> >> > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc >> >> > > 0000000000001f9c >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] >> >> > > 0000000000000060 000000000000000e ffffffffa05146ff >> >> > > aeff000000000031 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] >> >> > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 >> >> > > 00000000fffffffe >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call >> >> > > Trace: >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] >> >> > > [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 >> >> > > [hfsplus] >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] >> >> > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] >> >> > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] >> >> > > [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 >> >> > > [hfsplus] >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] >> >> > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] >> >> > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] >> >> > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] >> >> > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] >> >> > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] >> >> > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] >> >> > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] >> >> > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] >> >> > > [<ffffffff810fb827>] ? fput+0x57/0xb0 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] >> >> > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 >> >> > > 63 ca >> >> > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b >> >> > > 06 >> >> > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 >> >> > > 48 8d >> >> > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP >> >> > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP >> >> > > <ffff880270883c18> >> >> > > >> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end >> >> > > trace >> >> > > 0e65d1ee34a1e12e ]--- >> >> > > >> >> > > >> >> > > ================================================================= >> >> > > ================================= >> >> > > >> > >> > >> > Could you please share more details about the environment of the bug? >> > Do you know what operation trigger the bug? How had volume been >> > created? Can you reproduce the issue? >> > >> > It looks like the file deletion operation took place. Do you have any >> > idea what file is under deletion and what features it has? Does this >> > file contain any xattr? >> >> Ok, the following description is my situation. The Linux versions of >> our products are 3.10 and 4.4. >> >> Users may plug-in the external USB drive, whose hfs+ is formatted on >> their macOS device, to our device. They can do all file system >> operations(etc create, remove, rename files, and so on) on both >> macOS side and Linux side. >> >> The files created on macOS have the default xattr: >> com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAKrmU= >> The files created on Linux have no xattr. >> >> Some users seem enconter the call trace when removing the file on >> our device.And it will stock when we unmount it and cause the >> unmount fail. >> >> We cannot reproduce it by ourselves. The following link is the >> only one I can find that have the same situation of mine: >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1646565/comments/5 >> >> I try some reproduce ways: >> 1. Format the USB drive on Linux and macOS. >> 2. Use fsstress to stress create and unlink operations on Linux. >> 3. Create and remove the 100,000 files on Linux. >> 4. Create 10,000 ~ 500,000 files on MacOS and remove all on Linux. >> All of ways failed. >> >> There are about 10+ users enconter this situation so I try to fix it. >> Any Idea about it? > > OK. I see the point. Let's achieve the stable reproduction of the issue > at first. The issue is triggered by operations in the Attributes Tree > but not in the Catalog Tree. So, it will be enough to create the > several > files. The key trick is to create many xattrs for one file. It will be > better to create xattrs by native way under Macx OS X. I believe that > Attributes Tree's node size could be about 8 KB by default (but maybe 4 > KB only). It is better to check the size in superblock's dump, for > example. So, it needs to create a lot of xattrs for one file (or > several > files) with the goal to create the Attributes Tree with enough number > of > nodes. The best case will be to create the Attributes Tree with height > of 2 or 3 with the goal to have the index nodes too. As far as I can > judge, the issue can be reproduce during the deletion of the xattrs or > file with xattrs under Linux. And it needs to have the Attributes Tree > with many nodes because the issue should be triggered during the > operation of the b-tree node deletion. > > So, I hope my vision could help. Could you please try to reproduce the > issue and to share the results? Thanks for your advice! I will try to reproduce it. And we have a four-day vacations in our country from tomorrow on. I will try it at 3/4 ~ 3/5. Please forgive the delay. > > Thanks, > Vyacheslav Dubeyko. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-02-27 3:14 ` tchou @ 2019-03-04 7:45 ` tchou 2019-03-04 17:57 ` Viacheslav Dubeyko 0 siblings, 1 reply; 14+ messages in thread From: tchou @ 2019-03-04 7:45 UTC (permalink / raw) To: Viacheslav Dubeyko Cc: "\"Ernesto A.\"" Fernández, linux-fsdevel, linux-fsdevel-owner tchou 於 2019-02-27 11:14 寫到: > Viacheslav Dubeyko 於 2019-02-27 10:56 寫到: >> On Wed, 2019-02-27 at 09:46 +0800, tchou wrote: >>> Viacheslav Dubeyko 於 2019-02-27 02:01 寫到: >>> > On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: >>> >> Ernesto A. Fernández 於 2019-02-24 08:44 寫到: >>> >> > >>> >> > >>> > >>> > [skipped] >>> > >>> >> > > >>> >> > > [1] >>> >> > > ================================================================= >>> >> > > ================================= >>> >> > > >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: >>> >> > > trying to free free bnode 294912(2) >>> >> > > >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: >>> >> > > trying to free free bnode 294912(2) >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: >>> >> > > trying to free free bnode 294912(2) >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general >>> >> > > protection fault: 0000 [#1] SMP >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 >>> >> > > PID: >>> >> > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware >>> >> > > name: >>> >> > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 >>> >> > > 2017/05/09 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: >>> >> > > ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: >>> >> > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] >>> >> > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: >>> >> > > 0018:ffff880270883c18 EFLAGS: 00010202 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: >>> >> > > 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: >>> >> > > 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: >>> >> > > ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: >>> >> > > ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: >>> >> > > ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: >>> >> > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) >>> >> > > knlGS:0000000000000000 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 >>> >> > > DS: >>> >> > > 0000 ES: 0000 CR0: 000000008005003b >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: >>> >> > > 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: >>> >> > > 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: >>> >> > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] >>> >> > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc >>> >> > > 0000000000001f9c >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] >>> >> > > 0000000000000060 000000000000000e ffffffffa05146ff >>> >> > > aeff000000000031 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] >>> >> > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 >>> >> > > 00000000fffffffe >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call >>> >> > > Trace: >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] >>> >> > > [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 >>> >> > > [hfsplus] >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] >>> >> > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] >>> >> > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] >>> >> > > [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 >>> >> > > [hfsplus] >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] >>> >> > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] >>> >> > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] >>> >> > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] >>> >> > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] >>> >> > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] >>> >> > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] >>> >> > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] >>> >> > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] >>> >> > > [<ffffffff810fb827>] ? fput+0x57/0xb0 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] >>> >> > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 >>> >> > > 63 ca >>> >> > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b >>> >> > > 06 >>> >> > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 >>> >> > > 48 8d >>> >> > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP >>> >> > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP >>> >> > > <ffff880270883c18> >>> >> > > >>> >> > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end >>> >> > > trace >>> >> > > 0e65d1ee34a1e12e ]--- >>> >> > > >>> >> > > >>> >> > > ================================================================= >>> >> > > ================================= >>> >> > > >>> > >>> > >>> > Could you please share more details about the environment of the bug? >>> > Do you know what operation trigger the bug? How had volume been >>> > created? Can you reproduce the issue? >>> > >>> > It looks like the file deletion operation took place. Do you have any >>> > idea what file is under deletion and what features it has? Does this >>> > file contain any xattr? >>> >>> Ok, the following description is my situation. The Linux versions of >>> our products are 3.10 and 4.4. >>> >>> Users may plug-in the external USB drive, whose hfs+ is formatted on >>> their macOS device, to our device. They can do all file system >>> operations(etc create, remove, rename files, and so on) on both >>> macOS side and Linux side. >>> >>> The files created on macOS have the default xattr: >>> com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAKrmU= >>> The files created on Linux have no xattr. >>> >>> Some users seem enconter the call trace when removing the file on >>> our device.And it will stock when we unmount it and cause the >>> unmount fail. >>> >>> We cannot reproduce it by ourselves. The following link is the >>> only one I can find that have the same situation of mine: >>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1646565/comments/5 >>> >>> I try some reproduce ways: >>> 1. Format the USB drive on Linux and macOS. >>> 2. Use fsstress to stress create and unlink operations on Linux. >>> 3. Create and remove the 100,000 files on Linux. >>> 4. Create 10,000 ~ 500,000 files on MacOS and remove all on Linux. >>> All of ways failed. >>> >>> There are about 10+ users enconter this situation so I try to fix it. >>> Any Idea about it? >> >> OK. I see the point. Let's achieve the stable reproduction of the >> issue >> at first. The issue is triggered by operations in the Attributes Tree >> but not in the Catalog Tree. So, it will be enough to create the >> several >> files. The key trick is to create many xattrs for one file. It will be >> better to create xattrs by native way under Macx OS X. I believe that >> Attributes Tree's node size could be about 8 KB by default (but maybe >> 4 >> KB only). It is better to check the size in superblock's dump, for >> example. So, it needs to create a lot of xattrs for one file (or >> several >> files) with the goal to create the Attributes Tree with enough number >> of >> nodes. The best case will be to create the Attributes Tree with height >> of 2 or 3 with the goal to have the index nodes too. As far as I can >> judge, the issue can be reproduce during the deletion of the xattrs or >> file with xattrs under Linux. And it needs to have the Attributes Tree >> with many nodes because the issue should be triggered during the >> operation of the b-tree node deletion. >> >> So, I hope my vision could help. Could you please try to reproduce the >> issue and to share the results? > > Thanks for your advice! I will try to reproduce it. And we have a > four-day > vacations in our country from tomorrow on. I will try it at 3/4 ~ 3/5. > Please forgive the delay. > > Sorry for delay, I finish the reproduce steps. And it works! I try it on our product with kernel 3.10 and ubuntu with kernel 4.19 Both environmnets can reproduce the bug. I use two ways to reproduce: ============================================================================== 1). mkfs the hfs+ image on linux 1. touch file on it. 2. add enouth xattrs in the file for x in $(seq 1 1000) do setfattr -n user.$x -v "gggg${x}gggg${x}qqqqq${x}pleaseggggg" /mnt/1 done 3. rm the file 4. segmentation fault and get the same call trace 5. the fsck.hfsplus result: ** img2 (NO WRITE) ** Checking HFS Plus volume. ** Checking Extents Overflow file. ** Checking Catalog file. Invalid leaf record count (It should be 4 instead of 6) ** Checking Catalog hierarchy. Invalid directory item count (It should be 1 instead of 2) ** Checking Extended Attributes file. Invalid index key (8, 1) ** The volume untitled needs to be repaired. ============================================================================== 2). format hfs+ on mac 1. touch file on it. 2.add enouth xattrs in the file for x in $(seq 1 1000) do xattr -w user.$x "gggg${x}gggg${x}qqqqq${x}pleaseggggg" /Volumes/test/1 done 3. move the usb disk to linux 4. rm the file 5. segmentation fault and get the same call trace 6. the fsck.hfsplus result: ** /dev/sdq1 (NO WRITE) ** Checking HFS Plus volume. ** Checking Extents Overflow file. ** Checking Catalog file. ** Checking Catalog hierarchy. ** Checking Extended Attributes file. ** Checking volume bitmap. ** Checking volume information. Volume Header needs minor repair (2, 0) ** The volume test needs to be repaired. ============================================================================== It seems that the guess it correct. The Attributes Tree with enough number of node can trigger the bug. >> >> Thanks, >> Vyacheslav Dubeyko. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-03-04 7:45 ` tchou @ 2019-03-04 17:57 ` Viacheslav Dubeyko 2019-03-05 1:49 ` tchou 0 siblings, 1 reply; 14+ messages in thread From: Viacheslav Dubeyko @ 2019-03-04 17:57 UTC (permalink / raw) To: tchou Cc: "\"Ernesto A.\"" Fernández, linux-fsdevel, linux-fsdevel-owner On Mon, 2019-03-04 at 15:45 +0800, tchou wrote: > tchou 於 2019-02-27 11:14 寫到: > > > > Viacheslav Dubeyko 於 2019-02-27 10:56 寫到: > > > > > > On Wed, 2019-02-27 at 09:46 +0800, tchou wrote: > > > > > > > > Viacheslav Dubeyko 於 2019-02-27 02:01 寫到: > > > > > > > > > > On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: > > > > > > > > > > > > Ernesto A. Fernández 於 2019-02-24 08:44 寫到: > > > > > > > > > > > > > > > > > > > > > > > > > > [skipped] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [1] > > > > > > > > ======================================================= > > > > > > > > ========== > > > > > > > > ================================= > > > > > > > > > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] > > > > > > > > hfsplus: > > > > > > > > trying to free free bnode 294912(2) > > > > > > > > > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] > > > > > > > > hfsplus: > > > > > > > > trying to free free bnode 294912(2) > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] > > > > > > > > hfsplus: > > > > > > > > trying to free free bnode 294912(2) > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] > > > > > > > > general > > > > > > > > protection fault: 0000 [#1] SMP > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] > > > > > > > > CPU: 1 > > > > > > > > PID: > > > > > > > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 > > > > > > > > #15152 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] > > > > > > > > Hardware > > > > > > > > name: > > > > > > > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS > > > > > > > > M.405 > > > > > > > > 2017/05/09 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] > > > > > > > > task: > > > > > > > > ffff8802753fa040 ti: ffff880270880000 task.ti: > > > > > > > > ffff880270880000 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] > > > > > > > > RIP: > > > > > > > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] > > > > > > > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] > > > > > > > > RSP: > > > > > > > > 0018:ffff880270883c18 EFLAGS: 00010202 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] > > > > > > > > RAX: > > > > > > > > 0000000000000000 RBX: 0000000000000002 RCX: > > > > > > > > 000000000000aeff > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] > > > > > > > > RDX: > > > > > > > > 0000000000000000 RSI: ffff880270883c56 RDI: > > > > > > > > db73880000000000 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] > > > > > > > > RBP: > > > > > > > > ffff88005f7b1920 R08: 0000000000000002 R09: > > > > > > > > 0000000000000002 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] > > > > > > > > R10: > > > > > > > > ffff88005f7b18d0 R11: 0000000000000002 R12: > > > > > > > > 0000000000001ffc > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] > > > > > > > > R13: > > > > > > > > ffff880270883c56 R14: 0000000000000002 R15: > > > > > > > > 0000000000000002 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] > > > > > > > > FS: > > > > > > > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) > > > > > > > > knlGS:0000000000000000 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] > > > > > > > > CS: 0010 > > > > > > > > DS: > > > > > > > > 0000 ES: 0000 CR0: 000000008005003b > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] > > > > > > > > CR2: > > > > > > > > 00007f4fee05d000 CR3: 0000000247210000 CR4: > > > > > > > > 00000000001007e0 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] > > > > > > > > DR0: > > > > > > > > 0000000000000000 DR1: 0000000000000000 DR2: > > > > > > > > 0000000000000000 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] > > > > > > > > DR3: > > > > > > > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: > > > > > > > > 0000000000000400 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] > > > > > > > > Stack: > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] > > > > > > > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc > > > > > > > > 0000000000001f9c > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] > > > > > > > > 0000000000000060 000000000000000e ffffffffa05146ff > > > > > > > > aeff000000000031 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] > > > > > > > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 > > > > > > > > 00000000fffffffe > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] > > > > > > > > Call > > > > > > > > Trace: > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] > > > > > > > > [<ffffffffa05146ff>] ? > > > > > > > > hfsplus_bnode_write_u16+0x1f/0x30 > > > > > > > > [hfsplus] > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] > > > > > > > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 > > > > > > > > [hfsplus] > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] > > > > > > > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 > > > > > > > > [hfsplus] > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] > > > > > > > > [<ffffffffa0519979>] ? > > > > > > > > hfsplus_delete_all_attrs+0x49/0xb0 > > > > > > > > [hfsplus] > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] > > > > > > > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 > > > > > > > > [hfsplus] > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] > > > > > > > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 > > > > > > > > [hfsplus] > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] > > > > > > > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] > > > > > > > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] > > > > > > > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] > > > > > > > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] > > > > > > > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] > > > > > > > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] > > > > > > > > [<ffffffff810fb827>] ? fput+0x57/0xb0 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] > > > > > > > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] > > > > > > > > Code: 48 > > > > > > > > 63 ca > > > > > > > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 > > > > > > > > 04 74 09 8b > > > > > > > > 06 > > > > > > > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> > > > > > > > > 89 0c 07 > > > > > > > > 48 8d > > > > > > > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] > > > > > > > > RIP > > > > > > > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 > > > > > > > > [hfsplus] > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] > > > > > > > > RSP > > > > > > > > <ffff880270883c18> > > > > > > > > > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] > > > > > > > > ---[ end > > > > > > > > trace > > > > > > > > 0e65d1ee34a1e12e ]--- > > > > > > > > > > > > > > > > > > > > > > > > ======================================================= > > > > > > > > ========== > > > > > > > > ================================= > > > > > > > > > > > > > > > > > > Could you please share more details about the environment of > > > > > the bug? > > > > > Do you know what operation trigger the bug? How had volume > > > > > been > > > > > created? Can you reproduce the issue? > > > > > > > > > > It looks like the file deletion operation took place. Do you > > > > > have any > > > > > idea what file is under deletion and what features it has? > > > > > Does this > > > > > file contain any xattr? > > > > Ok, the following description is my situation. The Linux > > > > versions of > > > > our products are 3.10 and 4.4. > > > > > > > > Users may plug-in the external USB drive, whose hfs+ is > > > > formatted on > > > > their macOS device, to our device. They can do all file system > > > > operations(etc create, remove, rename files, and so on) on both > > > > macOS side and Linux side. > > > > > > > > The files created on macOS have the default xattr: > > > > com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAK > > > > rmU= > > > > The files created on Linux have no xattr. > > > > > > > > Some users seem enconter the call trace when removing the file > > > > on > > > > our device.And it will stock when we unmount it and cause the > > > > unmount fail. > > > > > > > > We cannot reproduce it by ourselves. The following link is the > > > > only one I can find that have the same situation of mine: > > > > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1646565/co > > > > mments/5 > > > > > > > > I try some reproduce ways: > > > > 1. Format the USB drive on Linux and macOS. > > > > 2. Use fsstress to stress create and unlink operations on > > > > Linux. > > > > 3. Create and remove the 100,000 files on Linux. > > > > 4. Create 10,000 ~ 500,000 files on MacOS and remove all on > > > > Linux. > > > > All of ways failed. > > > > > > > > There are about 10+ users enconter this situation so I try to > > > > fix it. > > > > Any Idea about it? > > > OK. I see the point. Let's achieve the stable reproduction of > > > the > > > issue > > > at first. The issue is triggered by operations in the Attributes > > > Tree > > > but not in the Catalog Tree. So, it will be enough to create the > > > several > > > files. The key trick is to create many xattrs for one file. It > > > will be > > > better to create xattrs by native way under Macx OS X. I believe > > > that > > > Attributes Tree's node size could be about 8 KB by default (but > > > maybe > > > 4 > > > KB only). It is better to check the size in superblock's dump, > > > for > > > example. So, it needs to create a lot of xattrs for one file (or > > > several > > > files) with the goal to create the Attributes Tree with enough > > > number > > > of > > > nodes. The best case will be to create the Attributes Tree with > > > height > > > of 2 or 3 with the goal to have the index nodes too. As far as I > > > can > > > judge, the issue can be reproduce during the deletion of the > > > xattrs or > > > file with xattrs under Linux. And it needs to have the Attributes > > > Tree > > > with many nodes because the issue should be triggered during the > > > operation of the b-tree node deletion. > > > > > > So, I hope my vision could help. Could you please try to > > > reproduce the > > > issue and to share the results? > > Thanks for your advice! I will try to reproduce it. And we have a > > four-day > > vacations in our country from tomorrow on. I will try it at 3/4 ~ > > 3/5. > > Please forgive the delay. > > > > > Sorry for delay, I finish the reproduce steps. And it works! > I try it on our product with kernel 3.10 and ubuntu with kernel 4.19 > Both environmnets can reproduce the bug. > > I use two ways to reproduce: > ===================================================================== > ========= > 1). mkfs the hfs+ image on linux > 1. touch file on it. > 2. add enouth xattrs in the file > for x in $(seq 1 1000) > do setfattr -n user.$x -v "gggg${x}gggg${x}qqqqq${x}pleaseggggg" > /mnt/1 > done > 3. rm the file > 4. segmentation fault and get the same call trace > 5. the fsck.hfsplus result: > ** img2 (NO WRITE) > ** Checking HFS Plus volume. > ** Checking Extents Overflow file. > ** Checking Catalog file. > Invalid leaf record count > (It should be 4 instead of 6) > ** Checking Catalog hierarchy. > Invalid directory item count > (It should be 1 instead of 2) > ** Checking Extended Attributes file. > Invalid index key > (8, 1) > ** The volume untitled needs to be repaired. > ===================================================================== > ========= > 2). format hfs+ on mac > 1. touch file on it. > 2.add enouth xattrs in the file > for x in $(seq 1 1000) > do xattr -w user.$x "gggg${x}gggg${x}qqqqq${x}pleaseggggg" > /Volumes/test/1 > done > 3. move the usb disk to linux > 4. rm the file > 5. segmentation fault and get the same call trace > 6. the fsck.hfsplus result: > ** /dev/sdq1 (NO WRITE) > ** Checking HFS Plus volume. > ** Checking Extents Overflow file. > ** Checking Catalog file. > ** Checking Catalog hierarchy. > ** Checking Extended Attributes file. > ** Checking volume bitmap. > ** Checking volume information. > Volume Header needs minor repair > (2, 0) > ** The volume test needs to be repaired. > ===================================================================== > ========= > > It seems that the guess it correct. The Attributes Tree with enough > number of > node can trigger the bug. Do you see the same call trace? Could you share the call trace in your case? Could you identify the code line in the source code that trigger the bug? Thanks, Vyacheslav Dubeyko. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-03-04 17:57 ` Viacheslav Dubeyko @ 2019-03-05 1:49 ` tchou 2019-03-05 17:41 ` Viacheslav Dubeyko 0 siblings, 1 reply; 14+ messages in thread From: tchou @ 2019-03-05 1:49 UTC (permalink / raw) To: Viacheslav Dubeyko Cc: "\"\"Ernesto A.\"\"" Fernández, linux-fsdevel, linux-fsdevel-owner Viacheslav Dubeyko 於 2019-03-05 01:57 寫到: > On Mon, 2019-03-04 at 15:45 +0800, tchou wrote: >> tchou 於 2019-02-27 11:14 寫到: >> > >> > Viacheslav Dubeyko 於 2019-02-27 10:56 寫到: >> > > >> > > On Wed, 2019-02-27 at 09:46 +0800, tchou wrote: >> > > > >> > > > Viacheslav Dubeyko 於 2019-02-27 02:01 寫到: >> > > > > >> > > > > On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: >> > > > > > >> > > > > > Ernesto A. Fernández 於 2019-02-24 08:44 寫到: >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > [skipped] >> > > > > >> > > > > > >> > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > [1] >> > > > > > > > ======================================================= >> > > > > > > > ========== >> > > > > > > > ================================= >> > > > > > > > >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] >> > > > > > > > hfsplus: >> > > > > > > > trying to free free bnode 294912(2) >> > > > > > > > >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] >> > > > > > > > hfsplus: >> > > > > > > > trying to free free bnode 294912(2) >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] >> > > > > > > > hfsplus: >> > > > > > > > trying to free free bnode 294912(2) >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] >> > > > > > > > general >> > > > > > > > protection fault: 0000 [#1] SMP >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] >> > > > > > > > CPU: 1 >> > > > > > > > PID: >> > > > > > > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 >> > > > > > > > #15152 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] >> > > > > > > > Hardware >> > > > > > > > name: >> > > > > > > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS >> > > > > > > > M.405 >> > > > > > > > 2017/05/09 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] >> > > > > > > > task: >> > > > > > > > ffff8802753fa040 ti: ffff880270880000 task.ti: >> > > > > > > > ffff880270880000 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] >> > > > > > > > RIP: >> > > > > > > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] >> > > > > > > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] >> > > > > > > > RSP: >> > > > > > > > 0018:ffff880270883c18 EFLAGS: 00010202 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] >> > > > > > > > RAX: >> > > > > > > > 0000000000000000 RBX: 0000000000000002 RCX: >> > > > > > > > 000000000000aeff >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] >> > > > > > > > RDX: >> > > > > > > > 0000000000000000 RSI: ffff880270883c56 RDI: >> > > > > > > > db73880000000000 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] >> > > > > > > > RBP: >> > > > > > > > ffff88005f7b1920 R08: 0000000000000002 R09: >> > > > > > > > 0000000000000002 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] >> > > > > > > > R10: >> > > > > > > > ffff88005f7b18d0 R11: 0000000000000002 R12: >> > > > > > > > 0000000000001ffc >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] >> > > > > > > > R13: >> > > > > > > > ffff880270883c56 R14: 0000000000000002 R15: >> > > > > > > > 0000000000000002 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] >> > > > > > > > FS: >> > > > > > > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) >> > > > > > > > knlGS:0000000000000000 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] >> > > > > > > > CS: 0010 >> > > > > > > > DS: >> > > > > > > > 0000 ES: 0000 CR0: 000000008005003b >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] >> > > > > > > > CR2: >> > > > > > > > 00007f4fee05d000 CR3: 0000000247210000 CR4: >> > > > > > > > 00000000001007e0 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] >> > > > > > > > DR0: >> > > > > > > > 0000000000000000 DR1: 0000000000000000 DR2: >> > > > > > > > 0000000000000000 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] >> > > > > > > > DR3: >> > > > > > > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: >> > > > > > > > 0000000000000400 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] >> > > > > > > > Stack: >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] >> > > > > > > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc >> > > > > > > > 0000000000001f9c >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] >> > > > > > > > 0000000000000060 000000000000000e ffffffffa05146ff >> > > > > > > > aeff000000000031 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] >> > > > > > > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 >> > > > > > > > 00000000fffffffe >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] >> > > > > > > > Call >> > > > > > > > Trace: >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] >> > > > > > > > [<ffffffffa05146ff>] ? >> > > > > > > > hfsplus_bnode_write_u16+0x1f/0x30 >> > > > > > > > [hfsplus] >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] >> > > > > > > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 >> > > > > > > > [hfsplus] >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] >> > > > > > > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 >> > > > > > > > [hfsplus] >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] >> > > > > > > > [<ffffffffa0519979>] ? >> > > > > > > > hfsplus_delete_all_attrs+0x49/0xb0 >> > > > > > > > [hfsplus] >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] >> > > > > > > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 >> > > > > > > > [hfsplus] >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] >> > > > > > > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 >> > > > > > > > [hfsplus] >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] >> > > > > > > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] >> > > > > > > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] >> > > > > > > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] >> > > > > > > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] >> > > > > > > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] >> > > > > > > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] >> > > > > > > > [<ffffffff810fb827>] ? fput+0x57/0xb0 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] >> > > > > > > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] >> > > > > > > > Code: 48 >> > > > > > > > 63 ca >> > > > > > > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 >> > > > > > > > 04 74 09 8b >> > > > > > > > 06 >> > > > > > > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> >> > > > > > > > 89 0c 07 >> > > > > > > > 48 8d >> > > > > > > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] >> > > > > > > > RIP >> > > > > > > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 >> > > > > > > > [hfsplus] >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] >> > > > > > > > RSP >> > > > > > > > <ffff880270883c18> >> > > > > > > > >> > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] >> > > > > > > > ---[ end >> > > > > > > > trace >> > > > > > > > 0e65d1ee34a1e12e ]--- >> > > > > > > > >> > > > > > > > >> > > > > > > > ======================================================= >> > > > > > > > ========== >> > > > > > > > ================================= >> > > > > > > > >> > > > > >> > > > > Could you please share more details about the environment of >> > > > > the bug? >> > > > > Do you know what operation trigger the bug? How had volume >> > > > > been >> > > > > created? Can you reproduce the issue? >> > > > > >> > > > > It looks like the file deletion operation took place. Do you >> > > > > have any >> > > > > idea what file is under deletion and what features it has? >> > > > > Does this >> > > > > file contain any xattr? >> > > > Ok, the following description is my situation. The Linux >> > > > versions of >> > > > our products are 3.10 and 4.4. >> > > > >> > > > Users may plug-in the external USB drive, whose hfs+ is >> > > > formatted on >> > > > their macOS device, to our device. They can do all file system >> > > > operations(etc create, remove, rename files, and so on) on both >> > > > macOS side and Linux side. >> > > > >> > > > The files created on macOS have the default xattr: >> > > > com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAK >> > > > rmU= >> > > > The files created on Linux have no xattr. >> > > > >> > > > Some users seem enconter the call trace when removing the file >> > > > on >> > > > our device.And it will stock when we unmount it and cause the >> > > > unmount fail. >> > > > >> > > > We cannot reproduce it by ourselves. The following link is the >> > > > only one I can find that have the same situation of mine: >> > > > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1646565/co >> > > > mments/5 >> > > > >> > > > I try some reproduce ways: >> > > > 1. Format the USB drive on Linux and macOS. >> > > > 2. Use fsstress to stress create and unlink operations on >> > > > Linux. >> > > > 3. Create and remove the 100,000 files on Linux. >> > > > 4. Create 10,000 ~ 500,000 files on MacOS and remove all on >> > > > Linux. >> > > > All of ways failed. >> > > > >> > > > There are about 10+ users enconter this situation so I try to >> > > > fix it. >> > > > Any Idea about it? >> > > OK. I see the point. Let's achieve the stable reproduction of >> > > the >> > > issue >> > > at first. The issue is triggered by operations in the Attributes >> > > Tree >> > > but not in the Catalog Tree. So, it will be enough to create the >> > > several >> > > files. The key trick is to create many xattrs for one file. It >> > > will be >> > > better to create xattrs by native way under Macx OS X. I believe >> > > that >> > > Attributes Tree's node size could be about 8 KB by default (but >> > > maybe >> > > 4 >> > > KB only). It is better to check the size in superblock's dump, >> > > for >> > > example. So, it needs to create a lot of xattrs for one file (or >> > > several >> > > files) with the goal to create the Attributes Tree with enough >> > > number >> > > of >> > > nodes. The best case will be to create the Attributes Tree with >> > > height >> > > of 2 or 3 with the goal to have the index nodes too. As far as I >> > > can >> > > judge, the issue can be reproduce during the deletion of the >> > > xattrs or >> > > file with xattrs under Linux. And it needs to have the Attributes >> > > Tree >> > > with many nodes because the issue should be triggered during the >> > > operation of the b-tree node deletion. >> > > >> > > So, I hope my vision could help. Could you please try to >> > > reproduce the >> > > issue and to share the results? >> > Thanks for your advice! I will try to reproduce it. And we have a >> > four-day >> > vacations in our country from tomorrow on. I will try it at 3/4 ~ >> > 3/5. >> > Please forgive the delay. >> > >> > >> Sorry for delay, I finish the reproduce steps. And it works! >> I try it on our product with kernel 3.10 and ubuntu with kernel 4.19 >> Both environmnets can reproduce the bug. >> >> I use two ways to reproduce: >> ===================================================================== >> ========= >> 1). mkfs the hfs+ image on linux >> 1. touch file on it. >> 2. add enouth xattrs in the file >> for x in $(seq 1 1000) >> do setfattr -n user.$x -v "gggg${x}gggg${x}qqqqq${x}pleaseggggg" >> /mnt/1 >> done >> 3. rm the file >> 4. segmentation fault and get the same call trace >> 5. the fsck.hfsplus result: >> ** img2 (NO WRITE) >> ** Checking HFS Plus volume. >> ** Checking Extents Overflow file. >> ** Checking Catalog file. >> Invalid leaf record count >> (It should be 4 instead of 6) >> ** Checking Catalog hierarchy. >> Invalid directory item count >> (It should be 1 instead of 2) >> ** Checking Extended Attributes file. >> Invalid index key >> (8, 1) >> ** The volume untitled needs to be repaired. >> ===================================================================== >> ========= >> 2). format hfs+ on mac >> 1. touch file on it. >> 2.add enouth xattrs in the file >> for x in $(seq 1 1000) >> do xattr -w user.$x "gggg${x}gggg${x}qqqqq${x}pleaseggggg" >> /Volumes/test/1 >> done >> 3. move the usb disk to linux >> 4. rm the file >> 5. segmentation fault and get the same call trace >> 6. the fsck.hfsplus result: >> ** /dev/sdq1 (NO WRITE) >> ** Checking HFS Plus volume. >> ** Checking Extents Overflow file. >> ** Checking Catalog file. >> ** Checking Catalog hierarchy. >> ** Checking Extended Attributes file. >> ** Checking volume bitmap. >> ** Checking volume information. >> Volume Header needs minor repair >> (2, 0) >> ** The volume test needs to be repaired. >> ===================================================================== >> ========= >> >> It seems that the guess it correct. The Attributes Tree with enough >> number of >> node can trigger the bug. > > Do you see the same call trace? Could you share the call trace in your > case? Could you identify the code line in the source code that trigger > the bug? > Here is my call trace: general protection fault: 0000 [#1] SMP CPU: 1 PID: 26527 Comm: rm Tainted: PF C O 3.10.108 #40283 Hardware name: Synology Inc. DS916+/Type2 - Board Product Name, BIOS M.215 3/2/2016 task: ffff880078b05040 ti: ffff880072b7c000 task.ti: ffff880072b7c000 RIP: 0010:[<ffffffffa025764f>] [<ffffffffa025764f>] hfsplus_bnode_write+0xaf/0x230 [hfsplus] RSP: 0018:ffff880072b7fbf0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000f0ff RDX: ffff880000000000 RSI: ffff880072b7fc2e RDI: 27c54210957d7000 RBP: ffff88006d94b4a0 R08: 0000000000000002 R09: 0000000000000002 R10: 0000000000000002 R11: ffff88006d94b498 R12: 0000000000000002 R13: ffff880072b7fc2e R14: 0000000000000002 R15: 0000000000000002 FS: 00007fef30a9c500(0000) GS:ffff880079e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000006fdb94 CR3: 0000000066794000 CR4: 00000000001007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880072b7fca8 0000000000001ffc 0000000000001fe8 000000000000000e 000000000000001e ffff88006d94b440 ffffffffa02577ef f0ff00000000000b ffffffffa0259c44 0000001e0000000c ffff880072b7fca8 00000000fffffffe Call Trace: [<ffffffffa02577ef>] ? hfsplus_bnode_write_u16+0x1f/0x30 [hfsplus] [<ffffffffa0259c44>] ? hfsplus_brec_remove+0x124/0x180 [hfsplus] [<ffffffffa025c1f0>] ? __hfsplus_delete_attr+0x70/0xc0 [hfsplus] [<ffffffffa025c9b9>] ? hfsplus_delete_all_attrs+0x49/0xb0 [hfsplus] [<ffffffffa02555f0>] ? hfsplus_delete_cat+0x260/0x2b0 [hfsplus] [<ffffffffa0255d0a>] ? hfsplus_unlink+0x7a/0x1d0 [hfsplus] [<ffffffff8113da6d>] ? __inode_permission+0x1d/0xb0 [<ffffffff8114158b>] ? may_delete+0x4b/0x240 [<ffffffff81141b67>] ? vfs_unlink+0x87/0x110 [<ffffffff81141e9a>] ? do_unlinkat+0x2aa/0x2c0 [<ffffffff81490b48>] ? __do_page_fault+0x228/0x510 [<ffffffff81135d11>] ? SYSC_newfstatat+0x21/0x30 [<ffffffff8149513e>] ? system_call_fastpath+0x1c/0x21 Code: 48 89 c7 48 01 df 49 83 fc 08 0f 83 f4 00 00 00 31 c0 41 f6 c2 04 74 09 8b 06 89 07 b8 04 00 00 00 41 f6 c2 02 74 0c 0f b7 0c 06 <66> 89 0c 07 48 8d 40 02 41 83 e2 01 74 07 0f b6 0c 06 88 0c 07 RIP [<ffffffffa025764f>] hfsplus_bnode_write+0xaf/0x230 [hfsplus] RSP <ffff880072b7fbf0> ---[ end trace 459946076ce91423 ]--- And the gdb says the code line trigger bug is memcpy: void hfs_bnode_write(struct hfs_bnode *node, void *buf, int off, int len) { struct page **pagep; int l; off += node->page_offset; pagep = node->page + (off >> PAGE_CACHE_SHIFT); off &= ~PAGE_CACHE_MASK; l = min(len, (int)PAGE_CACHE_SIZE - off); memcpy(kmap(*pagep) + off, buf, l); set_page_dirty(*pagep); kunmap(*pagep); while ((len -= l) != 0) { buf += l; l = min(len, (int)PAGE_CACHE_SIZE); >>>>>>>>>>>>>>>> memcpy(kmap(*++pagep), buf, l);<<<<<<<<<<<<<< set_page_dirty(*pagep); kunmap(*pagep); } } > Thanks, > Vyacheslav Dubeyko. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-03-05 1:49 ` tchou @ 2019-03-05 17:41 ` Viacheslav Dubeyko 0 siblings, 0 replies; 14+ messages in thread From: Viacheslav Dubeyko @ 2019-03-05 17:41 UTC (permalink / raw) To: tchou Cc: "\"\"Ernesto A.\"\"" Fernández, linux-fsdevel, linux-fsdevel-owner On Tue, 2019-03-05 at 09:49 +0800, tchou wrote: > Viacheslav Dubeyko 於 2019-03-05 01:57 寫到: > > > > On Mon, 2019-03-04 at 15:45 +0800, tchou wrote: > > > > > > [skipped] > > > > > > > > > > > > > > > > > Could you please share more details about the environment > > > > > > > of > > > > > > > the bug? > > > > > > > Do you know what operation trigger the bug? How had > > > > > > > volume > > > > > > > been > > > > > > > created? Can you reproduce the issue? > > > > > > > > > > > > > > It looks like the file deletion operation took place. Do > > > > > > > you > > > > > > > have any > > > > > > > idea what file is under deletion and what features it > > > > > > > has? > > > > > > > Does this > > > > > > > file contain any xattr? > > > > > > Ok, the following description is my situation. The Linux > > > > > > versions of > > > > > > our products are 3.10 and 4.4. > > > > > > > > > > > > Users may plug-in the external USB drive, whose hfs+ is > > > > > > formatted on > > > > > > their macOS device, to our device. They can do all file > > > > > > system > > > > > > operations(etc create, remove, rename files, and so on) on > > > > > > both > > > > > > macOS side and Linux side. > > > > > > > > > > > > The files created on macOS have the default xattr: > > > > > > com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA > > > > > > AAAK > > > > > > rmU= > > > > > > The files created on Linux have no xattr. > > > > > > > > > > > > Some users seem enconter the call trace when removing the > > > > > > file > > > > > > on > > > > > > our device.And it will stock when we unmount it and cause > > > > > > the > > > > > > unmount fail. > > > > > > > > > > > > We cannot reproduce it by ourselves. The following link is > > > > > > the > > > > > > only one I can find that have the same situation of mine: > > > > > > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/164656 > > > > > > 5/co > > > > > > mments/5 > > > > > > > > > > > > I try some reproduce ways: > > > > > > 1. Format the USB drive on Linux and macOS. > > > > > > 2. Use fsstress to stress create and unlink operations on > > > > > > Linux. > > > > > > 3. Create and remove the 100,000 files on Linux. > > > > > > 4. Create 10,000 ~ 500,000 files on MacOS and remove all on > > > > > > Linux. > > > > > > All of ways failed. > > > > > > > > > > > > There are about 10+ users enconter this situation so I try > > > > > > to > > > > > > fix it. > > > > > > Any Idea about it? > > > > > OK. I see the point. Let's achieve the stable reproduction of > > > > > the > > > > > issue > > > > > at first. The issue is triggered by operations in the > > > > > Attributes > > > > > Tree > > > > > but not in the Catalog Tree. So, it will be enough to create > > > > > the > > > > > several > > > > > files. The key trick is to create many xattrs for one file. > > > > > It > > > > > will be > > > > > better to create xattrs by native way under Macx OS X. I > > > > > believe > > > > > that > > > > > Attributes Tree's node size could be about 8 KB by default > > > > > (but > > > > > maybe > > > > > 4 > > > > > KB only). It is better to check the size in superblock's > > > > > dump, > > > > > for > > > > > example. So, it needs to create a lot of xattrs for one file > > > > > (or > > > > > several > > > > > files) with the goal to create the Attributes Tree with > > > > > enough > > > > > number > > > > > of > > > > > nodes. The best case will be to create the Attributes Tree > > > > > with > > > > > height > > > > > of 2 or 3 with the goal to have the index nodes too. As far > > > > > as I > > > > > can > > > > > judge, the issue can be reproduce during the deletion of the > > > > > xattrs or > > > > > file with xattrs under Linux. And it needs to have the > > > > > Attributes > > > > > Tree > > > > > with many nodes because the issue should be triggered during > > > > > the > > > > > operation of the b-tree node deletion. > > > > > > > > > > So, I hope my vision could help. Could you please try to > > > > > reproduce the > > > > > issue and to share the results? > > > > Thanks for your advice! I will try to reproduce it. And we have > > > > a > > > > four-day > > > > vacations in our country from tomorrow on. I will try it at 3/4 > > > > ~ > > > > 3/5. > > > > Please forgive the delay. > > > > > > > > > > > Sorry for delay, I finish the reproduce steps. And it works! > > > I try it on our product with kernel 3.10 and ubuntu with kernel > > > 4.19 > > > Both environmnets can reproduce the bug. > > > > > > I use two ways to reproduce: > > > ================================================================= > > > ==== > > > ========= > > > 1). mkfs the hfs+ image on linux > > > 1. touch file on it. > > > 2. add enouth xattrs in the file > > > for x in $(seq 1 1000) > > > do setfattr -n user.$x -v > > > "gggg${x}gggg${x}qqqqq${x}pleaseggggg" > > > /mnt/1 > > > done > > > 3. rm the file > > > 4. segmentation fault and get the same call trace > > > 5. the fsck.hfsplus result: > > > ** img2 (NO WRITE) > > > ** Checking HFS Plus volume. > > > ** Checking Extents Overflow file. > > > ** Checking Catalog file. > > > Invalid leaf record count > > > (It should be 4 instead of 6) > > > ** Checking Catalog hierarchy. > > > Invalid directory item count > > > (It should be 1 instead of 2) > > > ** Checking Extended Attributes file. > > > Invalid index key > > > (8, 1) > > > ** The volume untitled needs to be repaired. > > > ================================================================= > > > ==== > > > ========= > > > 2). format hfs+ on mac > > > 1. touch file on it. > > > 2.add enouth xattrs in the file > > > for x in $(seq 1 1000) > > > do xattr -w user.$x "gggg${x}gggg${x}qqqqq${x}pleaseggggg" > > > /Volumes/test/1 > > > done > > > 3. move the usb disk to linux > > > 4. rm the file > > > 5. segmentation fault and get the same call trace > > > 6. the fsck.hfsplus result: > > > ** /dev/sdq1 (NO WRITE) > > > ** Checking HFS Plus volume. > > > ** Checking Extents Overflow file. > > > ** Checking Catalog file. > > > ** Checking Catalog hierarchy. > > > ** Checking Extended Attributes file. > > > ** Checking volume bitmap. > > > ** Checking volume information. > > > Volume Header needs minor repair > > > (2, 0) > > > ** The volume test needs to be repaired. > > > ================================================================= > > > ==== > > > ========= > > > > > > It seems that the guess it correct. The Attributes Tree with > > > enough > > > number of > > > node can trigger the bug. > > Do you see the same call trace? Could you share the call trace in > > your > > case? Could you identify the code line in the source code that > > trigger > > the bug? > > > Here is my call trace: > general protection fault: 0000 [#1] SMP > CPU: 1 PID: 26527 Comm: rm Tainted: PF C O 3.10.108 #40283 > Hardware name: Synology Inc. DS916+/Type2 - Board Product Name, BIOS > M.215 3/2/2016 > task: ffff880078b05040 ti: ffff880072b7c000 task.ti: ffff880072b7c000 > RIP: 0010:[<ffffffffa025764f>] [<ffffffffa025764f>] > hfsplus_bnode_write+0xaf/0x230 [hfsplus] > RSP: 0018:ffff880072b7fbf0 EFLAGS: 00010202 > RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000f0ff > RDX: ffff880000000000 RSI: ffff880072b7fc2e RDI: 27c54210957d7000 > RBP: ffff88006d94b4a0 R08: 0000000000000002 R09: 0000000000000002 > R10: 0000000000000002 R11: ffff88006d94b498 R12: 0000000000000002 > R13: ffff880072b7fc2e R14: 0000000000000002 R15: 0000000000000002 > FS: 00007fef30a9c500(0000) GS:ffff880079e80000(0000) > knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 00000000006fdb94 CR3: 0000000066794000 CR4: 00000000001007e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Stack: > ffff880072b7fca8 0000000000001ffc 0000000000001fe8 000000000000000e > 000000000000001e ffff88006d94b440 ffffffffa02577ef f0ff00000000000b > ffffffffa0259c44 0000001e0000000c ffff880072b7fca8 00000000fffffffe > Call Trace: > [<ffffffffa02577ef>] ? hfsplus_bnode_write_u16+0x1f/0x30 [hfsplus] > [<ffffffffa0259c44>] ? hfsplus_brec_remove+0x124/0x180 [hfsplus] > [<ffffffffa025c1f0>] ? __hfsplus_delete_attr+0x70/0xc0 [hfsplus] > [<ffffffffa025c9b9>] ? hfsplus_delete_all_attrs+0x49/0xb0 [hfsplus] > [<ffffffffa02555f0>] ? hfsplus_delete_cat+0x260/0x2b0 [hfsplus] > [<ffffffffa0255d0a>] ? hfsplus_unlink+0x7a/0x1d0 [hfsplus] > [<ffffffff8113da6d>] ? __inode_permission+0x1d/0xb0 > [<ffffffff8114158b>] ? may_delete+0x4b/0x240 > [<ffffffff81141b67>] ? vfs_unlink+0x87/0x110 > [<ffffffff81141e9a>] ? do_unlinkat+0x2aa/0x2c0 > [<ffffffff81490b48>] ? __do_page_fault+0x228/0x510 > [<ffffffff81135d11>] ? SYSC_newfstatat+0x21/0x30 > [<ffffffff8149513e>] ? system_call_fastpath+0x1c/0x21 > Code: 48 89 c7 48 01 df 49 83 fc 08 0f 83 f4 00 00 00 31 c0 41 f6 c2 > 04 > 74 09 8b 06 89 07 b8 04 00 00 00 41 f6 c2 02 74 0c 0f b7 0c 06 <66> > 89 > 0c 07 48 8d 40 02 41 83 e2 01 74 07 0f b6 0c 06 88 0c 07 > RIP [<ffffffffa025764f>] hfsplus_bnode_write+0xaf/0x230 [hfsplus] > RSP <ffff880072b7fbf0> > ---[ end trace 459946076ce91423 ]--- > > > And the gdb says the code line trigger bug is memcpy: > > void hfs_bnode_write(struct hfs_bnode *node, void *buf, int off, int > len) > { > struct page **pagep; > int l; > > off += node->page_offset; > pagep = node->page + (off >> PAGE_CACHE_SHIFT); > off &= ~PAGE_CACHE_MASK; > > l = min(len, (int)PAGE_CACHE_SIZE - off); > memcpy(kmap(*pagep) + off, buf, l); > set_page_dirty(*pagep); > kunmap(*pagep); > > while ((len -= l) != 0) { > buf += l; > l = min(len, (int)PAGE_CACHE_SIZE); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > memcpy(kmap(*++pagep), buf, > > > > > > > > > > > > > > > > > l);<<<<<<<<<<<<<< > set_page_dirty(*pagep); > kunmap(*pagep); > } > } > Yes, I can reproduce the issue too. As far as I can see, there is some trouble with value of fd->record: (1) hfs_bnode_dump(node) [1] showed such dump: [ 373.529906] hfsplus: bnode: 3 [ 373.529907] hfsplus: 0, 0, 0, 2, 20 [ 373.529907] hfsplus: 14 (26,1) [ 373.529908] hfsplus: 44 (30,4) [ 373.529909] hfsplus: 78 (30,5) [ 373.529910] hfsplus: 112 (30,6) [ 373.529911] hfsplus: 146 (30,7) [ 373.529912] hfsplus: 180 (28,8) [ 373.529913] hfsplus: 212 (30,9) [ 373.529914] hfsplus: 246 (30,10) [ 373.529915] hfsplus: 280 (30,11) [ 373.529916] hfsplus: 314 (26,2) [ 373.529917] hfsplus: 344 (30,12) [ 373.529918] hfsplus: 378 (30,13) [ 373.529919] hfsplus: 412 (30,14) [ 373.529925] hfsplus: 446 (30,15) [ 373.529930] hfsplus: 480 (28,16) [ 373.529937] hfsplus: 512 (30,17) [ 373.529943] hfsplus: 546 (30,18) [ 373.529949] hfsplus: 580 (30,19) [ 373.529955] hfsplus: 614 (30,20) [ 373.529961] hfsplus: 648 (30,21) [ 373.529968] hfsplus: 682 (2) But hfs_dbg(BNODE_MOD, "remove_rec: %d, %d\n", fd->record, fd->keylength + fd->entrylength) [2] showed the value: [ 373.529973] hfsplus: remove_rec: -1, 30 It means that fd->record has -1 value. This value is incorrect. I believe that it is the reason of the issue. Because, -1 creates the incorrect value of rec_off [3]: rec_off = tree->node_size - (fd->record + 2) * 2; I believe that it makes sense to add the check of fd->record value in hfs_brec_remove(). But it is not the fix of the issue. Currently, it's not completely clear for me why fd->record has incorrect value after the search. I am going to check the search algorithm in hfs_brec_find() [4]. Thanks, Vyacheslav Dubeyko. [1] https://elixir.bootlin.com/linux/latest/source/fs/hfsplus/brec.c#L195 [2] https://elixir.bootlin.com/linux/latest/source/fs/hfsplus/brec.c#L196 [3] https://elixir.bootlin.com/linux/latest/source/fs/hfsplus/brec.c#L188 [4] https://elixir.bootlin.com/linux/latest/source/fs/hfsplus/bfind.c#L164 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-02-27 1:46 ` tchou 2019-02-27 2:42 ` Viacheslav Dubeyko 2019-02-27 2:56 ` Viacheslav Dubeyko @ 2019-02-27 3:10 ` Ernesto A. Fernández 2019-02-27 3:39 ` tchou 2 siblings, 1 reply; 14+ messages in thread From: Ernesto A. Fernández @ 2019-02-27 3:10 UTC (permalink / raw) To: tchou; +Cc: Viacheslav Dubeyko, linux-fsdevel, linux-fsdevel-owner, slava On Wed, Feb 27, 2019 at 09:46:16AM +0800, tchou wrote: > Viacheslav Dubeyko 於 2019-02-27 02:01 寫到: > > On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: > > > Ernesto A. Fernández 於 2019-02-24 08:44 寫到: > > > > > > > > > > > > [skipped] > > > > > > > > > > > > [1] > > > > > ================================================================= > > > > > ================================= > > > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: > > > > > trying to free free bnode 294912(2) > > > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: > > > > > trying to free free bnode 294912(2) > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: > > > > > trying to free free bnode 294912(2) > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general > > > > > protection fault: 0000 [#1] SMP > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 > > > > > PID: > > > > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware > > > > > name: > > > > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 > > > > > 2017/05/09 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: > > > > > ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: > > > > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] > > > > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: > > > > > 0018:ffff880270883c18 EFLAGS: 00010202 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: > > > > > 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: > > > > > 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: > > > > > ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: > > > > > ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: > > > > > ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: > > > > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) > > > > > knlGS:0000000000000000 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 > > > > > DS: > > > > > 0000 ES: 0000 CR0: 000000008005003b > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: > > > > > 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: > > > > > 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: > > > > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] > > > > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc > > > > > 0000000000001f9c > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] > > > > > 0000000000000060 000000000000000e ffffffffa05146ff > > > > > aeff000000000031 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] > > > > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 > > > > > 00000000fffffffe > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call > > > > > Trace: > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] > > > > > [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 > > > > > [hfsplus] > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] > > > > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] > > > > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] > > > > > [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 > > > > > [hfsplus] > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] > > > > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] > > > > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] > > > > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] > > > > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] > > > > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] > > > > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] > > > > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] > > > > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] > > > > > [<ffffffff810fb827>] ? fput+0x57/0xb0 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] > > > > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 > > > > > 63 ca > > > > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b > > > > > 06 > > > > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 > > > > > 48 8d > > > > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP > > > > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP > > > > > <ffff880270883c18> > > > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end > > > > > trace > > > > > 0e65d1ee34a1e12e ]--- > > > > > > > > > > > > > > > ================================================================= > > > > > ================================= > > > > > > > > > > > Could you please share more details about the environment of the bug? > > Do you know what operation trigger the bug? How had volume been > > created? Can you reproduce the issue? > > > > It looks like the file deletion operation took place. Do you have any > > idea what file is under deletion and what features it has? Does this > > file contain any xattr? > > Ok, the following description is my situation. The Linux versions of > our products are 3.10 and 4.4. > > Users may plug-in the external USB drive, whose hfs+ is formatted on > their macOS device, to our device. They can do all file system > operations(etc create, remove, rename files, and so on) on both > macOS side and Linux side. > > The files created on macOS have the default xattr: > com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAKrmU= > The files created on Linux have no xattr. > > Some users seem enconter the call trace when removing the file on > our device.And it will stock when we unmount it and cause the > unmount fail. > > We cannot reproduce it by ourselves. The following link is the > only one I can find that have the same situation of mine: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1646565/comments/5 > > I try some reproduce ways: > 1. Format the USB drive on Linux and macOS. > 2. Use fsstress to stress create and unlink operations on Linux. > 3. Create and remove the 100,000 files on Linux. > 4. Create 10,000 ~ 500,000 files on MacOS and remove all on Linux. > All of ways failed. > > There are about 10+ users enconter this situation so I try to fix it. > Any Idea about it? Try this script: touch test.file i=1 while [ $i -le 250 ]; do setfattr -n user.$i test.file ((++i)) done rm test.file I submitted a patch for this issue over a year ago. I no longer believe the xattr implementation can be fixed, but maybe it can help with your problem. > > Thanks, > Ting-Chang Hou > > > > > Thanks, > > Vyacheslav Dubeyko. > > > > > > > > > > > > > > > > > Best regards, > > > > > Ting-Chang Hou #8487 > > > > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-02-27 3:10 ` Ernesto A. Fernández @ 2019-02-27 3:39 ` tchou 2019-03-05 23:23 ` Ernesto A. Fernández 0 siblings, 1 reply; 14+ messages in thread From: tchou @ 2019-02-27 3:39 UTC (permalink / raw) To: Ernesto A. Fernández Cc: Viacheslav Dubeyko, linux-fsdevel, linux-fsdevel-owner, slava Ernesto A. Fernández 於 2019-02-27 11:10 寫到: > On Wed, Feb 27, 2019 at 09:46:16AM +0800, tchou wrote: >> Viacheslav Dubeyko 於 2019-02-27 02:01 寫到: >> > On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: >> > > Ernesto A. Fernández 於 2019-02-24 08:44 寫到: >> > > > >> > > > >> > >> > [skipped] >> > >> > > > > >> > > > > [1] >> > > > > ================================================================= >> > > > > ================================= >> > > > > >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: >> > > > > trying to free free bnode 294912(2) >> > > > > >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: >> > > > > trying to free free bnode 294912(2) >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: >> > > > > trying to free free bnode 294912(2) >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general >> > > > > protection fault: 0000 [#1] SMP >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 >> > > > > PID: >> > > > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware >> > > > > name: >> > > > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 >> > > > > 2017/05/09 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: >> > > > > ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: >> > > > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] >> > > > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: >> > > > > 0018:ffff880270883c18 EFLAGS: 00010202 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: >> > > > > 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: >> > > > > 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: >> > > > > ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: >> > > > > ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: >> > > > > ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: >> > > > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) >> > > > > knlGS:0000000000000000 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 >> > > > > DS: >> > > > > 0000 ES: 0000 CR0: 000000008005003b >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: >> > > > > 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: >> > > > > 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: >> > > > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] >> > > > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc >> > > > > 0000000000001f9c >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] >> > > > > 0000000000000060 000000000000000e ffffffffa05146ff >> > > > > aeff000000000031 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] >> > > > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 >> > > > > 00000000fffffffe >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call >> > > > > Trace: >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] >> > > > > [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 >> > > > > [hfsplus] >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] >> > > > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] >> > > > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] >> > > > > [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 >> > > > > [hfsplus] >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] >> > > > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] >> > > > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] >> > > > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] >> > > > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] >> > > > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] >> > > > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] >> > > > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] >> > > > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] >> > > > > [<ffffffff810fb827>] ? fput+0x57/0xb0 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] >> > > > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 >> > > > > 63 ca >> > > > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b >> > > > > 06 >> > > > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 >> > > > > 48 8d >> > > > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP >> > > > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP >> > > > > <ffff880270883c18> >> > > > > >> > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end >> > > > > trace >> > > > > 0e65d1ee34a1e12e ]--- >> > > > > >> > > > > >> > > > > ================================================================= >> > > > > ================================= >> > > > > >> > >> > >> > Could you please share more details about the environment of the bug? >> > Do you know what operation trigger the bug? How had volume been >> > created? Can you reproduce the issue? >> > >> > It looks like the file deletion operation took place. Do you have any >> > idea what file is under deletion and what features it has? Does this >> > file contain any xattr? >> >> Ok, the following description is my situation. The Linux versions of >> our products are 3.10 and 4.4. >> >> Users may plug-in the external USB drive, whose hfs+ is formatted on >> their macOS device, to our device. They can do all file system >> operations(etc create, remove, rename files, and so on) on both >> macOS side and Linux side. >> >> The files created on macOS have the default xattr: >> com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAKrmU= >> The files created on Linux have no xattr. >> >> Some users seem enconter the call trace when removing the file on >> our device.And it will stock when we unmount it and cause the >> unmount fail. >> >> We cannot reproduce it by ourselves. The following link is the >> only one I can find that have the same situation of mine: >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1646565/comments/5 >> >> I try some reproduce ways: >> 1. Format the USB drive on Linux and macOS. >> 2. Use fsstress to stress create and unlink operations on Linux. >> 3. Create and remove the 100,000 files on Linux. >> 4. Create 10,000 ~ 500,000 files on MacOS and remove all on Linux. >> All of ways failed. >> >> There are about 10+ users enconter this situation so I try to fix it. >> Any Idea about it? > > Try this script: > > touch test.file > i=1 > while [ $i -le 250 ]; do > setfattr -n user.$i test.file > ((++i)) > done > rm test.file > > I submitted a patch for this issue over a year ago. I no longer > believe the > xattr implementation can be fixed, but maybe it can help with your > problem. Ok, I will try it. And which patch is it? Maybe I can figure somthing out. > >> >> Thanks, >> Ting-Chang Hou >> >> > >> > Thanks, >> > Vyacheslav Dubeyko. >> > >> > > > > >> > > > > >> > > > > Best regards, >> > > > > Ting-Chang Hou #8487 >> > > > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) 2019-02-27 3:39 ` tchou @ 2019-03-05 23:23 ` Ernesto A. Fernández 0 siblings, 0 replies; 14+ messages in thread From: Ernesto A. Fernández @ 2019-03-05 23:23 UTC (permalink / raw) To: tchou; +Cc: Viacheslav Dubeyko, linux-fsdevel, linux-fsdevel-owner, slava On Wed, Feb 27, 2019 at 11:39:46AM +0800, tchou wrote: > Ernesto A. Fernández 於 2019-02-27 11:10 寫到: > > On Wed, Feb 27, 2019 at 09:46:16AM +0800, tchou wrote: > > > Viacheslav Dubeyko 於 2019-02-27 02:01 寫到: > > > > On Tue, 2019-02-26 at 11:32 +0800, tchou wrote: > > > > > Ernesto A. Fernández 於 2019-02-24 08:44 寫到: > > > > > > > > > > > > > > > > > > > > [skipped] > > > > > > > > > > > > > > > > > > [1] > > > > > > > ================================================================= > > > > > > > ================================= > > > > > > > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.504049] hfsplus: > > > > > > > trying to free free bnode 294912(2) > > > > > > > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.510017] hfsplus: > > > > > > > trying to free free bnode 294912(2) > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.515983] hfsplus: > > > > > > > trying to free free bnode 294912(2) > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.521949] general > > > > > > > protection fault: 0000 [#1] SMP > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.621069] CPU: 1 > > > > > > > PID: > > > > > > > 18715 Comm: SYNO.FileStatio Tainted: P C O 3.10.102 #15152 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.630308] Hardware > > > > > > > name: > > > > > > > Synology Inc. DS1517+/Type2 - Board Product Name1, BIOS M.405 > > > > > > > 2017/05/09 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.640423] task: > > > > > > > ffff8802753fa040 ti: ffff880270880000 task.ti: ffff880270880000 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.648779] RIP: > > > > > > > 0010:[<ffffffffa051459e>] [<ffffffffa051459e>] > > > > > > > hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.659489] RSP: > > > > > > > 0018:ffff880270883c18 EFLAGS: 00010202 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.665415] RAX: > > > > > > > 0000000000000000 RBX: 0000000000000002 RCX: 000000000000aeff > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.673391] RDX: > > > > > > > 0000000000000000 RSI: ffff880270883c56 RDI: db73880000000000 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.681366] RBP: > > > > > > > ffff88005f7b1920 R08: 0000000000000002 R09: 0000000000000002 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.689343] R10: > > > > > > > ffff88005f7b18d0 R11: 0000000000000002 R12: 0000000000001ffc > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.697310] R13: > > > > > > > ffff880270883c56 R14: 0000000000000002 R15: 0000000000000002 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.705286] FS: > > > > > > > 00007f4fee0607c0(0000) GS:ffff88027fc40000(0000) > > > > > > > knlGS:0000000000000000 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.714322] CS: 0010 > > > > > > > DS: > > > > > > > 0000 ES: 0000 CR0: 000000008005003b > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.720744] CR2: > > > > > > > 00007f4fee05d000 CR3: 0000000247210000 CR4: 00000000001007e0 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.728711] DR0: > > > > > > > 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.736687] DR3: > > > > > > > 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.744654] Stack: > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.746896] > > > > > > > ffff88005f7b18c0 ffff880270883cd0 0000000000001ffc > > > > > > > 0000000000001f9c > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.755181] > > > > > > > 0000000000000060 000000000000000e ffffffffa05146ff > > > > > > > aeff000000000031 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.763468] > > > > > > > ffffffffa0516bf9 000000606228c340 ffff880270883cd0 > > > > > > > 00000000fffffffe > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.771763] Call > > > > > > > Trace: > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.774497] > > > > > > > [<ffffffffa05146ff>] ? hfsplus_bnode_write_u16+0x1f/0x30 > > > > > > > [hfsplus] > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.782671] > > > > > > > [<ffffffffa0516bf9>] ? hfsplus_brec_remove+0x129/0x190 [hfsplus] > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.790650] > > > > > > > [<ffffffffa05191d0>] ? __hfsplus_delete_attr+0x90/0xf0 [hfsplus] > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.798629] > > > > > > > [<ffffffffa0519979>] ? hfsplus_delete_all_attrs+0x49/0xb0 > > > > > > > [hfsplus] > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.806900] > > > > > > > [<ffffffffa0512482>] ? hfsplus_delete_cat+0x1c2/0x2b0 [hfsplus] > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.814782] > > > > > > > [<ffffffffa0512d90>] ? hfsplus_unlink+0x1d0/0x1e0 [hfsplus] > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.822277] > > > > > > > [<ffffffff811066bd>] ? __inode_permission+0x1d/0xb0 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.828992] > > > > > > > [<ffffffff8110a72a>] ? vfs_unlink+0x8a/0x100 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.835025] > > > > > > > [<ffffffff8110a9c3>] ? do_unlinkat+0x223/0x230 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.841255] > > > > > > > [<ffffffff8111d853>] ? mntput_no_expire+0x13/0x130 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.847873] > > > > > > > [<ffffffff8104d1bc>] ? task_work_run+0x9c/0xe0 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.854102] > > > > > > > [<ffffffff81002901>] ? do_notify_resume+0x61/0x90 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.860624] > > > > > > > [<ffffffff810fb827>] ? fput+0x57/0xb0 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.865978] > > > > > > > [<ffffffff8149dd32>] ? system_call_fastpath+0x16/0x1b > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.872884] Code: 48 > > > > > > > 63 ca > > > > > > > 48 01 cf 48 83 fb 08 0f 83 fd 00 00 00 31 c0 41 f6 c3 04 74 09 8b > > > > > > > 06 > > > > > > > 89 07 b8 04 00 00 00 41 f6 c3 02 74 0c 0f b7 0c 06 <66> 89 0c 07 > > > > > > > 48 8d > > > > > > > 40 02 41 83 e3 01 74 07 0f b6 0c 06 88 0c 07 > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.894293] RIP > > > > > > > [<ffffffffa051459e>] hfsplus_bnode_write+0x9e/0x1e0 [hfsplus] > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.902375] RSP > > > > > > > <ffff880270883c18> > > > > > > > > > > > > > > 2017-08-30T10:32:30-04:00 BS-SAN kernel: [ 5471.906350] ---[ end > > > > > > > trace > > > > > > > 0e65d1ee34a1e12e ]--- > > > > > > > > > > > > > > > > > > > > > ================================================================= > > > > > > > ================================= > > > > > > > > > > > > > > > > > > > Could you please share more details about the environment of the bug? > > > > Do you know what operation trigger the bug? How had volume been > > > > created? Can you reproduce the issue? > > > > > > > > It looks like the file deletion operation took place. Do you have any > > > > idea what file is under deletion and what features it has? Does this > > > > file contain any xattr? > > > > > > Ok, the following description is my situation. The Linux versions of > > > our products are 3.10 and 4.4. > > > > > > Users may plug-in the external USB drive, whose hfs+ is formatted on > > > their macOS device, to our device. They can do all file system > > > operations(etc create, remove, rename files, and so on) on both > > > macOS side and Linux side. > > > > > > The files created on macOS have the default xattr: > > > com.apple.FinderInfo=0sAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAKrmU= > > > The files created on Linux have no xattr. > > > > > > Some users seem enconter the call trace when removing the file on > > > our device.And it will stock when we unmount it and cause the > > > unmount fail. > > > > > > We cannot reproduce it by ourselves. The following link is the > > > only one I can find that have the same situation of mine: > > > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1646565/comments/5 > > > > > > I try some reproduce ways: > > > 1. Format the USB drive on Linux and macOS. > > > 2. Use fsstress to stress create and unlink operations on Linux. > > > 3. Create and remove the 100,000 files on Linux. > > > 4. Create 10,000 ~ 500,000 files on MacOS and remove all on Linux. > > > All of ways failed. > > > > > > There are about 10+ users enconter this situation so I try to fix it. > > > Any Idea about it? > > > > Try this script: > > > > touch test.file > > i=1 > > while [ $i -le 250 ]; do > > setfattr -n user.$i test.file > > ((++i)) > > done > > rm test.file > > > > I submitted a patch for this issue over a year ago. I no longer believe > > the > > xattr implementation can be fixed, but maybe it can help with your > > problem. > > Ok, I will try it. And which patch is it? Maybe I can figure somthing out. You can get it from patchwork.kernel.org/patch/9990497/ I haven't tested this in a while, and for the record I no longer believe it to be the proper solution. It's just a simple hack to work around some of the many issues with the xattr implementation. It's still better than getting a segfault. Ernesto > > > > > > > > > Thanks, > > > Ting-Chang Hou > > > > > > > > > > > Thanks, > > > > Vyacheslav Dubeyko. > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > Ting-Chang Hou #8487 > > > > > > > > ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2019-03-05 23:24 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <73216487-9ed5-4492-b7c6-b757fdb3b566@Mail>
2019-02-24 0:44 ` The question about hfs+ patch (hfsplus: fix BUG on bnode parent update) Ernesto A. Fernández
2019-02-26 3:32 ` tchou
2019-02-26 18:01 ` Viacheslav Dubeyko
2019-02-27 1:46 ` tchou
2019-02-27 2:42 ` Viacheslav Dubeyko
2019-02-27 2:56 ` Viacheslav Dubeyko
2019-02-27 3:14 ` tchou
2019-03-04 7:45 ` tchou
2019-03-04 17:57 ` Viacheslav Dubeyko
2019-03-05 1:49 ` tchou
2019-03-05 17:41 ` Viacheslav Dubeyko
2019-02-27 3:10 ` Ernesto A. Fernández
2019-02-27 3:39 ` tchou
2019-03-05 23:23 ` Ernesto A. Fernández
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.