* [PATCH] arch: sh: Kconfig: pedantic cleanups
@ 2019-03-06 20:45 ` Enrico Weigelt, metux IT consult
0 siblings, 0 replies; 4+ messages in thread
From: Enrico Weigelt, metux IT consult @ 2019-03-06 20:45 UTC (permalink / raw)
To: linux-kernel; +Cc: ysato, dalias, linux-sh
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
---
arch/sh/Kconfig | 24 ++++++++++++------------
arch/sh/boards/Kconfig | 10 +++++-----
arch/sh/mm/Kconfig | 6 +++---
3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index d9a9144..e58a470 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -233,9 +233,9 @@ config ARCH_SHMOBILE
select PM
config CPU_HAS_PMU
- depends on CPU_SH4 || CPU_SH4A
- default y
- bool
+ depends on CPU_SH4 || CPU_SH4A
+ default y
+ bool
if SUPERH32
@@ -266,7 +266,7 @@ config CPU_SUBTYPE_SH7201
select CPU_SH2A
select CPU_HAS_FPU
select SYS_SUPPORTS_SH_MTU2
-
+
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
@@ -549,7 +549,7 @@ endchoice
endif
source "arch/sh/mm/Kconfig"
-
+
source "arch/sh/Kconfig.cpu"
source "arch/sh/boards/Kconfig"
@@ -716,7 +716,7 @@ config GUSA
This is the default implementation for both UP and non-ll/sc
CPUs, and is used by the libc, amongst others.
- For additional information, design information can be found
+ For additional information, design information can be found
in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
This should only be disabled for special cases where alternate
@@ -848,12 +848,12 @@ config MAPLE
bool "Maple Bus support"
depends on SH_DREAMCAST
help
- The Maple Bus is SEGA's serial communication bus for peripherals
- on the Dreamcast. Without this bus support you won't be able to
- get your Dreamcast keyboard etc to work, so most users
- probably want to say 'Y' here, unless you are only using the
- Dreamcast with a serial line terminal or a remote network
- connection.
+ The Maple Bus is SEGA's serial communication bus for peripherals
+ on the Dreamcast. Without this bus support you won't be able to
+ get your Dreamcast keyboard etc to work, so most users
+ probably want to say 'Y' here, unless you are only using the
+ Dreamcast with a serial line terminal or a remote network
+ connection.
endmenu
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index b9a3705..a9dc96f 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -39,7 +39,7 @@ config SH_SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
+ CPU_SUBTYPE_SH7750R
help
Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
@@ -97,7 +97,7 @@ config SH_7751_SOLUTION_ENGINE
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
-
+
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
@@ -170,8 +170,8 @@ config SH_RSK
CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
- Select this option if configuring for any of the RSK+ MCU
- evaluation platforms.
+ Select this option if configuring for any of the RSK+ MCU
+ evaluation platforms.
config SH_SDK7780
bool "SDK7780R3"
@@ -239,7 +239,7 @@ config SH_MIGOR
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
+ by Renesas System Solutions Asia Pte. Ltd.
config SH_AP325RXA
bool "AP-325RXA"
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 02ed2df..134ca45 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -5,7 +5,7 @@ config QUICKLIST
def_bool y
config MMU
- bool "Support for memory management hardware"
+ bool "Support for memory management hardware"
depends on !CPU_SH2
default y
help
@@ -154,8 +154,8 @@ config ARCH_MEMORY_PROBE
depends on MEMORY_HOTPLUG
config IOREMAP_FIXED
- def_bool y
- depends on X2TLB || SUPERH64
+ def_bool y
+ depends on X2TLB || SUPERH64
config UNCACHED_MAPPING
bool
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] arch: sh: Kconfig: pedantic cleanups
@ 2019-03-06 20:45 ` Enrico Weigelt, metux IT consult
0 siblings, 0 replies; 4+ messages in thread
From: Enrico Weigelt, metux IT consult @ 2019-03-06 20:45 UTC (permalink / raw)
To: linux-kernel; +Cc: ysato, dalias, linux-sh
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
---
arch/sh/Kconfig | 24 ++++++++++++------------
arch/sh/boards/Kconfig | 10 +++++-----
arch/sh/mm/Kconfig | 6 +++---
3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index d9a9144..e58a470 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -233,9 +233,9 @@ config ARCH_SHMOBILE
select PM
config CPU_HAS_PMU
- depends on CPU_SH4 || CPU_SH4A
- default y
- bool
+ depends on CPU_SH4 || CPU_SH4A
+ default y
+ bool
if SUPERH32
@@ -266,7 +266,7 @@ config CPU_SUBTYPE_SH7201
select CPU_SH2A
select CPU_HAS_FPU
select SYS_SUPPORTS_SH_MTU2
-
+
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
@@ -549,7 +549,7 @@ endchoice
endif
source "arch/sh/mm/Kconfig"
-
+
source "arch/sh/Kconfig.cpu"
source "arch/sh/boards/Kconfig"
@@ -716,7 +716,7 @@ config GUSA
This is the default implementation for both UP and non-ll/sc
CPUs, and is used by the libc, amongst others.
- For additional information, design information can be found
+ For additional information, design information can be found
in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
This should only be disabled for special cases where alternate
@@ -848,12 +848,12 @@ config MAPLE
bool "Maple Bus support"
depends on SH_DREAMCAST
help
- The Maple Bus is SEGA's serial communication bus for peripherals
- on the Dreamcast. Without this bus support you won't be able to
- get your Dreamcast keyboard etc to work, so most users
- probably want to say 'Y' here, unless you are only using the
- Dreamcast with a serial line terminal or a remote network
- connection.
+ The Maple Bus is SEGA's serial communication bus for peripherals
+ on the Dreamcast. Without this bus support you won't be able to
+ get your Dreamcast keyboard etc to work, so most users
+ probably want to say 'Y' here, unless you are only using the
+ Dreamcast with a serial line terminal or a remote network
+ connection.
endmenu
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index b9a3705..a9dc96f 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -39,7 +39,7 @@ config SH_SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
+ CPU_SUBTYPE_SH7750R
help
Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
@@ -97,7 +97,7 @@ config SH_7751_SOLUTION_ENGINE
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
-
+
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
@@ -170,8 +170,8 @@ config SH_RSK
CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
- Select this option if configuring for any of the RSK+ MCU
- evaluation platforms.
+ Select this option if configuring for any of the RSK+ MCU
+ evaluation platforms.
config SH_SDK7780
bool "SDK7780R3"
@@ -239,7 +239,7 @@ config SH_MIGOR
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
+ by Renesas System Solutions Asia Pte. Ltd.
config SH_AP325RXA
bool "AP-325RXA"
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 02ed2df..134ca45 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -5,7 +5,7 @@ config QUICKLIST
def_bool y
config MMU
- bool "Support for memory management hardware"
+ bool "Support for memory management hardware"
depends on !CPU_SH2
default y
help
@@ -154,8 +154,8 @@ config ARCH_MEMORY_PROBE
depends on MEMORY_HOTPLUG
config IOREMAP_FIXED
- def_bool y
- depends on X2TLB || SUPERH64
+ def_bool y
+ depends on X2TLB || SUPERH64
config UNCACHED_MAPPING
bool
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2] arch: sh: Kconfig: pedantic formatting
2019-03-06 20:45 ` Enrico Weigelt, metux IT consult
@ 2019-03-07 22:18 ` Enrico Weigelt, metux IT consult
-1 siblings, 0 replies; 4+ messages in thread
From: Enrico Weigelt, metux IT consult @ 2019-03-07 22:18 UTC (permalink / raw)
To: linux-kernel; +Cc: ysato, dalias, linux-sh
Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up. Just indention changes.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
---
arch/sh/Kconfig | 24 ++++++++++++------------
arch/sh/boards/Kconfig | 10 +++++-----
arch/sh/mm/Kconfig | 6 +++---
3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index d9a9144..e58a470 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -233,9 +233,9 @@ config ARCH_SHMOBILE
select PM
config CPU_HAS_PMU
- depends on CPU_SH4 || CPU_SH4A
- default y
- bool
+ depends on CPU_SH4 || CPU_SH4A
+ default y
+ bool
if SUPERH32
@@ -266,7 +266,7 @@ config CPU_SUBTYPE_SH7201
select CPU_SH2A
select CPU_HAS_FPU
select SYS_SUPPORTS_SH_MTU2
-
+
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
@@ -549,7 +549,7 @@ endchoice
endif
source "arch/sh/mm/Kconfig"
-
+
source "arch/sh/Kconfig.cpu"
source "arch/sh/boards/Kconfig"
@@ -716,7 +716,7 @@ config GUSA
This is the default implementation for both UP and non-ll/sc
CPUs, and is used by the libc, amongst others.
- For additional information, design information can be found
+ For additional information, design information can be found
in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
This should only be disabled for special cases where alternate
@@ -848,12 +848,12 @@ config MAPLE
bool "Maple Bus support"
depends on SH_DREAMCAST
help
- The Maple Bus is SEGA's serial communication bus for peripherals
- on the Dreamcast. Without this bus support you won't be able to
- get your Dreamcast keyboard etc to work, so most users
- probably want to say 'Y' here, unless you are only using the
- Dreamcast with a serial line terminal or a remote network
- connection.
+ The Maple Bus is SEGA's serial communication bus for peripherals
+ on the Dreamcast. Without this bus support you won't be able to
+ get your Dreamcast keyboard etc to work, so most users
+ probably want to say 'Y' here, unless you are only using the
+ Dreamcast with a serial line terminal or a remote network
+ connection.
endmenu
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index b9a3705..a9dc96f 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -39,7 +39,7 @@ config SH_SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
+ CPU_SUBTYPE_SH7750R
help
Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
@@ -97,7 +97,7 @@ config SH_7751_SOLUTION_ENGINE
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
-
+
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
@@ -170,8 +170,8 @@ config SH_RSK
CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
- Select this option if configuring for any of the RSK+ MCU
- evaluation platforms.
+ Select this option if configuring for any of the RSK+ MCU
+ evaluation platforms.
config SH_SDK7780
bool "SDK7780R3"
@@ -239,7 +239,7 @@ config SH_MIGOR
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
+ by Renesas System Solutions Asia Pte. Ltd.
config SH_AP325RXA
bool "AP-325RXA"
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 02ed2df..134ca45 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -5,7 +5,7 @@ config QUICKLIST
def_bool y
config MMU
- bool "Support for memory management hardware"
+ bool "Support for memory management hardware"
depends on !CPU_SH2
default y
help
@@ -154,8 +154,8 @@ config ARCH_MEMORY_PROBE
depends on MEMORY_HOTPLUG
config IOREMAP_FIXED
- def_bool y
- depends on X2TLB || SUPERH64
+ def_bool y
+ depends on X2TLB || SUPERH64
config UNCACHED_MAPPING
bool
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2] arch: sh: Kconfig: pedantic formatting
@ 2019-03-07 22:18 ` Enrico Weigelt, metux IT consult
0 siblings, 0 replies; 4+ messages in thread
From: Enrico Weigelt, metux IT consult @ 2019-03-07 22:18 UTC (permalink / raw)
To: linux-kernel; +Cc: ysato, dalias, linux-sh
Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up. Just indention changes.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
---
arch/sh/Kconfig | 24 ++++++++++++------------
arch/sh/boards/Kconfig | 10 +++++-----
arch/sh/mm/Kconfig | 6 +++---
3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index d9a9144..e58a470 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -233,9 +233,9 @@ config ARCH_SHMOBILE
select PM
config CPU_HAS_PMU
- depends on CPU_SH4 || CPU_SH4A
- default y
- bool
+ depends on CPU_SH4 || CPU_SH4A
+ default y
+ bool
if SUPERH32
@@ -266,7 +266,7 @@ config CPU_SUBTYPE_SH7201
select CPU_SH2A
select CPU_HAS_FPU
select SYS_SUPPORTS_SH_MTU2
-
+
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
@@ -549,7 +549,7 @@ endchoice
endif
source "arch/sh/mm/Kconfig"
-
+
source "arch/sh/Kconfig.cpu"
source "arch/sh/boards/Kconfig"
@@ -716,7 +716,7 @@ config GUSA
This is the default implementation for both UP and non-ll/sc
CPUs, and is used by the libc, amongst others.
- For additional information, design information can be found
+ For additional information, design information can be found
in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
This should only be disabled for special cases where alternate
@@ -848,12 +848,12 @@ config MAPLE
bool "Maple Bus support"
depends on SH_DREAMCAST
help
- The Maple Bus is SEGA's serial communication bus for peripherals
- on the Dreamcast. Without this bus support you won't be able to
- get your Dreamcast keyboard etc to work, so most users
- probably want to say 'Y' here, unless you are only using the
- Dreamcast with a serial line terminal or a remote network
- connection.
+ The Maple Bus is SEGA's serial communication bus for peripherals
+ on the Dreamcast. Without this bus support you won't be able to
+ get your Dreamcast keyboard etc to work, so most users
+ probably want to say 'Y' here, unless you are only using the
+ Dreamcast with a serial line terminal or a remote network
+ connection.
endmenu
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index b9a3705..a9dc96f 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -39,7 +39,7 @@ config SH_SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
+ CPU_SUBTYPE_SH7750R
help
Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
@@ -97,7 +97,7 @@ config SH_7751_SOLUTION_ENGINE
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
-
+
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
@@ -170,8 +170,8 @@ config SH_RSK
CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
- Select this option if configuring for any of the RSK+ MCU
- evaluation platforms.
+ Select this option if configuring for any of the RSK+ MCU
+ evaluation platforms.
config SH_SDK7780
bool "SDK7780R3"
@@ -239,7 +239,7 @@ config SH_MIGOR
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
+ by Renesas System Solutions Asia Pte. Ltd.
config SH_AP325RXA
bool "AP-325RXA"
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 02ed2df..134ca45 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -5,7 +5,7 @@ config QUICKLIST
def_bool y
config MMU
- bool "Support for memory management hardware"
+ bool "Support for memory management hardware"
depends on !CPU_SH2
default y
help
@@ -154,8 +154,8 @@ config ARCH_MEMORY_PROBE
depends on MEMORY_HOTPLUG
config IOREMAP_FIXED
- def_bool y
- depends on X2TLB || SUPERH64
+ def_bool y
+ depends on X2TLB || SUPERH64
config UNCACHED_MAPPING
bool
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-03-07 22:18 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-06 20:45 [PATCH] arch: sh: Kconfig: pedantic cleanups Enrico Weigelt, metux IT consult
2019-03-06 20:45 ` Enrico Weigelt, metux IT consult
2019-03-07 22:18 ` [PATCH v2] arch: sh: Kconfig: pedantic formatting Enrico Weigelt, metux IT consult
2019-03-07 22:18 ` Enrico Weigelt, metux IT consult
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.