* [PATCHv4 0/9] cfg80211/mac80211: Add support for TID specific configuration
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Add infrastructure to support per TID configurations like noack policy,
retry count, AMPDU control(disable/enable), RTSCTS control(enable/disable)
and TX rate mask configurations.
This will be useful for the driver which can supports data TID
specific configuration rather than phy level configurations.
Here NL80211_CMD_SET_TID_CONFIG added to support this operation by
accepting TID configuration.
This command can accept STA mac addreess to make the configuration
station specific rather than applying to all the connected stations
to the netdev.
And this nested command configuration can accept multiple number of
data TID specific configuration in a single command,
enum ieee80211_tid_conf_mask used to notify the driver that which
configuration got modified for the TID.
Tamizh chelvam (9):
nl80211: New netlink command for TID specific configuration
nl80211: Add new netlink attribute for TID speicific retry count
nl80211: Add netlink attribute for AMPDU aggregation enable/disable
nl80211: Add netlink attribute to enable/disable RTS_CTS
nl80211: Add netlink attribute to configure TID specific tx rate
mac80211: Add api to support configuring TID specific configuration
ath10k: Add wmi command support for station specific TID config
ath10k: Add new api to support TID specific configuration
ath10k: Add extended TID configuration support
v4:
* Fixed kbuild warnings.
v3:
* Modified "nl80211: Add netlink attribute to configure TID specific tx rate" patch
to accept multiple TX rate configuration at a time.
* Modified noack and ampdu variable data type to int in
"mac80211: Add api to support configuring TID specific configuration" patch to store
default configuration.
* Modified "ath10k: Add new api to support TID specific configuration" patch to handle
default values for noack and ampdu. And added sta pointer sanity check in
ath10k_mac_tid_bitrate_config function.
* Fixed "ath10k: Add extended TID configuration support" wmi command parameters
assigned part.
v2:
* Added support to accept multiple TID configuration
* Added support to configure TX rate and RTSCTS control
drivers/net/wireless/ath/ath10k/core.c | 4 +
drivers/net/wireless/ath/ath10k/core.h | 6 +
drivers/net/wireless/ath/ath10k/mac.c | 679 +++++++++++++++++++++++++----
drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +
drivers/net/wireless/ath/ath10k/wmi.c | 35 ++
drivers/net/wireless/ath/ath10k/wmi.h | 72 +++
include/net/cfg80211.h | 57 +++
include/net/mac80211.h | 38 ++
include/uapi/linux/nl80211.h | 182 ++++++++
net/mac80211/cfg.c | 28 ++
net/mac80211/driver-ops.h | 15 +
net/wireless/nl80211.c | 253 ++++++++++-
net/wireless/rdev-ops.h | 11 +
net/wireless/trace.h | 18 +
14 files changed, 1319 insertions(+), 98 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCHv4 0/9] cfg80211/mac80211: Add support for TID specific configuration
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Add infrastructure to support per TID configurations like noack policy,
retry count, AMPDU control(disable/enable), RTSCTS control(enable/disable)
and TX rate mask configurations.
This will be useful for the driver which can supports data TID
specific configuration rather than phy level configurations.
Here NL80211_CMD_SET_TID_CONFIG added to support this operation by
accepting TID configuration.
This command can accept STA mac addreess to make the configuration
station specific rather than applying to all the connected stations
to the netdev.
And this nested command configuration can accept multiple number of
data TID specific configuration in a single command,
enum ieee80211_tid_conf_mask used to notify the driver that which
configuration got modified for the TID.
Tamizh chelvam (9):
nl80211: New netlink command for TID specific configuration
nl80211: Add new netlink attribute for TID speicific retry count
nl80211: Add netlink attribute for AMPDU aggregation enable/disable
nl80211: Add netlink attribute to enable/disable RTS_CTS
nl80211: Add netlink attribute to configure TID specific tx rate
mac80211: Add api to support configuring TID specific configuration
ath10k: Add wmi command support for station specific TID config
ath10k: Add new api to support TID specific configuration
ath10k: Add extended TID configuration support
v4:
* Fixed kbuild warnings.
v3:
* Modified "nl80211: Add netlink attribute to configure TID specific tx rate" patch
to accept multiple TX rate configuration at a time.
* Modified noack and ampdu variable data type to int in
"mac80211: Add api to support configuring TID specific configuration" patch to store
default configuration.
* Modified "ath10k: Add new api to support TID specific configuration" patch to handle
default values for noack and ampdu. And added sta pointer sanity check in
ath10k_mac_tid_bitrate_config function.
* Fixed "ath10k: Add extended TID configuration support" wmi command parameters
assigned part.
v2:
* Added support to accept multiple TID configuration
* Added support to configure TX rate and RTSCTS control
drivers/net/wireless/ath/ath10k/core.c | 4 +
drivers/net/wireless/ath/ath10k/core.h | 6 +
drivers/net/wireless/ath/ath10k/mac.c | 679 +++++++++++++++++++++++++----
drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +
drivers/net/wireless/ath/ath10k/wmi.c | 35 ++
drivers/net/wireless/ath/ath10k/wmi.h | 72 +++
include/net/cfg80211.h | 57 +++
include/net/mac80211.h | 38 ++
include/uapi/linux/nl80211.h | 182 ++++++++
net/mac80211/cfg.c | 28 ++
net/mac80211/driver-ops.h | 15 +
net/wireless/nl80211.c | 253 ++++++++++-
net/wireless/rdev-ops.h | 11 +
net/wireless/trace.h | 18 +
14 files changed, 1319 insertions(+), 98 deletions(-)
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCHv4 1/9] nl80211: New netlink command for TID specific configuration
2019-03-11 6:48 ` Tamizh chelvam
@ 2019-03-11 6:48 ` Tamizh chelvam
-1 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Add a new NL command, NL80211_CMD_SET_TID_CONFIG to support
data TID specific configuration. This per TID configurations
are passed in NL80211_ATTR_TID_CONFIG which is a nested
attribute. This patch adds support to configure per TID
noack policy through NL80211_ATTR_TID_CONFIG_NOACK attribute.
Data TID value for this configuration will be passed through
NL80211_ATTR_TID_CONFIG_TID attribute. When the user-space wants
this configuration peer specific rather than being applied for
all the connected stations, MAC address of the peer can be passed
in NL80211_ATTR_MAC attribute. This patch introduced
enum ieee80211_tid_conf_mask to notify the driver that which
configuration modified.
Driver supporting data TID specific noack policy configuration
should be advertise through NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG
and supporting per STA data TID noack policy configuration
should be advertise through NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 35 +++++++++++++++
include/uapi/linux/nl80211.h | 51 +++++++++++++++++++++
net/wireless/nl80211.c | 102 ++++++++++++++++++++++++++++++++++++++++++
net/wireless/rdev-ops.h | 11 +++++
net/wireless/trace.h | 18 ++++++++
5 files changed, 217 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index bb307a1..c606e78 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -509,6 +509,35 @@ struct cfg80211_chan_def {
u32 center_freq2;
};
+enum ieee80211_tid_conf_mask {
+ IEEE80211_TID_CONF_NOACK = BIT(0),
+};
+
+/**
+ * struct ieee80211_tid_cfg - TID specific configuration
+ * @tid: TID number
+ * @tid_conf_mask: bitmap indicating which parameter changed
+ * see %enum ieee80211_tid_conf_mask
+ * @noack: noack configuration value for the TID
+ */
+struct ieee80211_tid_cfg {
+ u8 tid;
+ enum ieee80211_tid_conf_mask tid_conf_mask;
+ u8 noack;
+};
+
+/**
+ * struct ieee80211_tid_config - TID configuration
+ * @peer: Station's MAC address
+ * @n_tid_conf: Number of TID specific configurations to be applied
+ * @tid_conf: Configuration change info
+ */
+struct ieee80211_tid_config {
+ const u8 *peer;
+ u32 n_tid_conf;
+ struct ieee80211_tid_cfg tid_conf[];
+};
+
/**
* cfg80211_get_chandef_type - return old channel type from chandef
* @chandef: the channel definition
@@ -3436,6 +3465,10 @@ struct cfg80211_pmsr_request {
* Statistics should be cumulative, currently no way to reset is provided.
* @start_pmsr: start peer measurement (e.g. FTM)
* @abort_pmsr: abort peer measurement
+ * @set_tid_config: TID specific configuration. Apply this configuration for
+ * all the connected stations in the BSS if peer is NULL. Otherwise
+ * apply this configuration to the specific station.
+ * This callback may sleep.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -3750,6 +3783,8 @@ struct cfg80211_ops {
struct cfg80211_pmsr_request *request);
void (*abort_pmsr)(struct wiphy *wiphy, struct wireless_dev *wdev,
struct cfg80211_pmsr_request *request);
+ int (*set_tid_config)(struct wiphy *wiphy, struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf);
};
/*
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index dd4f86e..c901a48 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1065,6 +1065,10 @@
* indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
* determining the width and type.
*
+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
+ * is passed through this command using %NL80211_ATTR_TID_CONFIG
+ * nested attributes.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1285,6 +1289,8 @@ enum nl80211_commands {
NL80211_CMD_NOTIFY_RADAR,
+ NL80211_CMD_SET_TID_CONFIG,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2308,6 +2314,9 @@ enum nl80211_commands {
* @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
* scheduler.
*
+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
+ * nested attribute with %NL80211_ATTR_TID_* sub-attributes.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2759,6 +2768,8 @@ enum nl80211_attrs {
NL80211_ATTR_AIRTIME_WEIGHT,
+ NL80211_ATTR_TID_CONFIG,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -4543,6 +4554,39 @@ enum nl80211_tx_power_setting {
NL80211_TX_POWER_FIXED,
};
+enum nl80211_tid_config {
+ NL80211_TID_CONFIG_DEFAULT,
+ NL80211_TID_CONFIG_ENABLE,
+ NL80211_TID_CONFIG_DISABLE,
+};
+
+/* enum nl80211_attr_tid_config - TID specific configuration.
+ * @NL80211_ATTR_TID_CONFIG_TID: a TID value (u8 attribute).
+ * @NL80211_ATTR_TID_CONFIG_NOACK: Configure ack policy for the TID.
+ * specified in %NL80211_ATTR_TID_CONFIG_TID. see %enum nl80211_tid_config.
+ * Its type is u8, if the peer MAC address is passed in %NL80211_ATTR_MAC,
+ * then the noack configuration is applied to the data frame for the tid
+ * to that connected station. This configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, then this
+ * configuration should be treated as per-netdev configuration.
+ * This configuration will be cleared when the interface goes down and on
+ * the disconnection from a BSS. Driver supporting this feature should
+ * advertise NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG and
+ * NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG for supporting per sta
+ * configuration.
+ */
+enum nl80211_attr_tid_config {
+ __NL80211_ATTR_TID_INVALID,
+ NL80211_ATTR_TID_CONFIG_TID,
+ NL80211_ATTR_TID_CONFIG_NOACK,
+
+ /* keep last */
+ __NL80211_ATTR_TID_CONFIG_AFTER_LAST,
+ NL80211_ATTR_TID_CONFIG_MAX = __NL80211_ATTR_TID_CONFIG_AFTER_LAST - 1
+};
+
/**
* enum nl80211_packet_pattern_attr - packet pattern attribute
* @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
@@ -5343,6 +5387,11 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
* (set/del PMKSA operations) in AP mode.
*
+ * @NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG: Driver supports per TID NoAck
+ * policy functionality.
+ * @NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG: Driver supports STA specific NoAck
+ * policy functionality.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5384,6 +5433,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 25a9e3b..f0e44ee 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -280,6 +280,13 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_NESTED_ARRAY(nl80211_psmr_peer_attr_policy),
};
+static const struct nla_policy
+nl80211_attr_tid_config_policy[NL80211_ATTR_TID_CONFIG_MAX + 1] = {
+ [NL80211_ATTR_TID_CONFIG_TID] = { .type = NLA_U8 },
+ [NL80211_ATTR_TID_CONFIG_NOACK] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+};
+
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
@@ -541,6 +548,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_PEER_MEASUREMENTS] =
NLA_POLICY_NESTED(nl80211_pmsr_attr_policy),
[NL80211_ATTR_AIRTIME_WEIGHT] = NLA_POLICY_MIN(NLA_U16, 1),
+ [NL80211_ATTR_TID_CONFIG] =
+ NLA_POLICY_NESTED(nl80211_attr_tid_config_policy),
};
/* policy for the key attributes */
@@ -13259,6 +13268,91 @@ static int nl80211_get_ftm_responder_stats(struct sk_buff *skb,
return -ENOBUFS;
}
+static int parse_tid_conf(struct cfg80211_registered_device *rdev,
+ struct nlattr *attrs[],
+ struct ieee80211_tid_cfg *tid_conf,
+ const u8 *peer)
+{
+ tid_conf->tid = nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_TID]);
+ if (attrs[NL80211_ATTR_TID_CONFIG_NOACK]) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG))
+ return -ENOTSUPP;
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG))
+ return -ENOTSUPP;
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_NOACK;
+ tid_conf->noack =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_NOACK]);
+ }
+
+ return 0;
+}
+
+static int nl80211_set_tid_config(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct nlattr *attrs[NL80211_ATTR_TID_CONFIG_MAX + 1];
+ struct net_device *dev = info->user_ptr[1];
+ struct ieee80211_tid_config *tid_conf;
+ struct nlattr *tid;
+ int conf_idx = 0, rem_conf;
+ u32 num_conf = 0, size_of_conf;
+ int ret = -EINVAL;
+
+ if (!info->attrs[NL80211_ATTR_TID_CONFIG])
+ return -EINVAL;
+
+ if (!rdev->ops->set_tid_config)
+ return -EOPNOTSUPP;
+
+ nla_for_each_nested(tid, info->attrs[NL80211_ATTR_TID_CONFIG],
+ rem_conf)
+ num_conf++;
+
+ size_of_conf = sizeof(struct ieee80211_tid_config) +
+ num_conf * sizeof(struct ieee80211_tid_cfg);
+
+ tid_conf = kzalloc(size_of_conf, GFP_KERNEL);
+ if (!tid_conf)
+ return -ENOMEM;
+
+ tid_conf->n_tid_conf = num_conf;
+
+ if (info->attrs[NL80211_ATTR_MAC])
+ tid_conf->peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
+ else
+ tid_conf->peer = NULL;
+
+ nla_for_each_nested(tid, info->attrs[NL80211_ATTR_TID_CONFIG],
+ rem_conf) {
+ ret = nla_parse_nested(attrs, NL80211_ATTR_TID_CONFIG_MAX, tid,
+ NULL, NULL);
+
+ if (ret)
+ return ret;
+
+ if (!attrs[NL80211_ATTR_TID_CONFIG_TID])
+ return -EINVAL;
+
+ ret = parse_tid_conf(rdev, attrs, &tid_conf->tid_conf[conf_idx],
+ tid_conf->peer);
+ if (ret)
+ goto bad_tid_conf;
+
+ conf_idx++;
+ }
+
+ ret = rdev_set_tid_config(rdev, dev, tid_conf);
+
+bad_tid_conf:
+ kfree(tid_conf);
+ return ret;
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -14193,6 +14287,14 @@ static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_SET_TID_CONFIG,
+ .doit = nl80211_set_tid_config,
+ .policy = nl80211_policy,
+ .flags = GENL_UNS_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_family nl80211_fam __ro_after_init = {
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 5cb48d1..59e1905 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -1272,4 +1272,15 @@ static inline int rdev_del_pmk(struct cfg80211_registered_device *rdev,
trace_rdev_return_void(&rdev->wiphy);
}
+static inline int rdev_set_tid_config(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf)
+{
+ int ret;
+
+ trace_rdev_set_tid_config(&rdev->wiphy, dev, tid_conf);
+ ret = rdev->ops->set_tid_config(&rdev->wiphy, dev, tid_conf);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
#endif /* __CFG80211_RDEV_OPS */
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 44b2ce1..186de1f 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -3362,6 +3362,24 @@
WIPHY_PR_ARG, WDEV_PR_ARG,
(unsigned long long)__entry->cookie)
);
+
+TRACE_EVENT(rdev_set_tid_config,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ struct ieee80211_tid_config *tid_conf),
+ TP_ARGS(wiphy, netdev, tid_conf),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ MAC_ENTRY(peer)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ MAC_ASSIGN(peer, tid_conf->peer);
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", peer: " MAC_PR_FMT,
+ WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer))
+);
#endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */
#undef TRACE_INCLUDE_PATH
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 1/9] nl80211: New netlink command for TID specific configuration
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Add a new NL command, NL80211_CMD_SET_TID_CONFIG to support
data TID specific configuration. This per TID configurations
are passed in NL80211_ATTR_TID_CONFIG which is a nested
attribute. This patch adds support to configure per TID
noack policy through NL80211_ATTR_TID_CONFIG_NOACK attribute.
Data TID value for this configuration will be passed through
NL80211_ATTR_TID_CONFIG_TID attribute. When the user-space wants
this configuration peer specific rather than being applied for
all the connected stations, MAC address of the peer can be passed
in NL80211_ATTR_MAC attribute. This patch introduced
enum ieee80211_tid_conf_mask to notify the driver that which
configuration modified.
Driver supporting data TID specific noack policy configuration
should be advertise through NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG
and supporting per STA data TID noack policy configuration
should be advertise through NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 35 +++++++++++++++
include/uapi/linux/nl80211.h | 51 +++++++++++++++++++++
net/wireless/nl80211.c | 102 ++++++++++++++++++++++++++++++++++++++++++
net/wireless/rdev-ops.h | 11 +++++
net/wireless/trace.h | 18 ++++++++
5 files changed, 217 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index bb307a1..c606e78 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -509,6 +509,35 @@ struct cfg80211_chan_def {
u32 center_freq2;
};
+enum ieee80211_tid_conf_mask {
+ IEEE80211_TID_CONF_NOACK = BIT(0),
+};
+
+/**
+ * struct ieee80211_tid_cfg - TID specific configuration
+ * @tid: TID number
+ * @tid_conf_mask: bitmap indicating which parameter changed
+ * see %enum ieee80211_tid_conf_mask
+ * @noack: noack configuration value for the TID
+ */
+struct ieee80211_tid_cfg {
+ u8 tid;
+ enum ieee80211_tid_conf_mask tid_conf_mask;
+ u8 noack;
+};
+
+/**
+ * struct ieee80211_tid_config - TID configuration
+ * @peer: Station's MAC address
+ * @n_tid_conf: Number of TID specific configurations to be applied
+ * @tid_conf: Configuration change info
+ */
+struct ieee80211_tid_config {
+ const u8 *peer;
+ u32 n_tid_conf;
+ struct ieee80211_tid_cfg tid_conf[];
+};
+
/**
* cfg80211_get_chandef_type - return old channel type from chandef
* @chandef: the channel definition
@@ -3436,6 +3465,10 @@ struct cfg80211_pmsr_request {
* Statistics should be cumulative, currently no way to reset is provided.
* @start_pmsr: start peer measurement (e.g. FTM)
* @abort_pmsr: abort peer measurement
+ * @set_tid_config: TID specific configuration. Apply this configuration for
+ * all the connected stations in the BSS if peer is NULL. Otherwise
+ * apply this configuration to the specific station.
+ * This callback may sleep.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -3750,6 +3783,8 @@ struct cfg80211_ops {
struct cfg80211_pmsr_request *request);
void (*abort_pmsr)(struct wiphy *wiphy, struct wireless_dev *wdev,
struct cfg80211_pmsr_request *request);
+ int (*set_tid_config)(struct wiphy *wiphy, struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf);
};
/*
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index dd4f86e..c901a48 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1065,6 +1065,10 @@
* indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
* determining the width and type.
*
+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
+ * is passed through this command using %NL80211_ATTR_TID_CONFIG
+ * nested attributes.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1285,6 +1289,8 @@ enum nl80211_commands {
NL80211_CMD_NOTIFY_RADAR,
+ NL80211_CMD_SET_TID_CONFIG,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2308,6 +2314,9 @@ enum nl80211_commands {
* @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
* scheduler.
*
+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
+ * nested attribute with %NL80211_ATTR_TID_* sub-attributes.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2759,6 +2768,8 @@ enum nl80211_attrs {
NL80211_ATTR_AIRTIME_WEIGHT,
+ NL80211_ATTR_TID_CONFIG,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -4543,6 +4554,39 @@ enum nl80211_tx_power_setting {
NL80211_TX_POWER_FIXED,
};
+enum nl80211_tid_config {
+ NL80211_TID_CONFIG_DEFAULT,
+ NL80211_TID_CONFIG_ENABLE,
+ NL80211_TID_CONFIG_DISABLE,
+};
+
+/* enum nl80211_attr_tid_config - TID specific configuration.
+ * @NL80211_ATTR_TID_CONFIG_TID: a TID value (u8 attribute).
+ * @NL80211_ATTR_TID_CONFIG_NOACK: Configure ack policy for the TID.
+ * specified in %NL80211_ATTR_TID_CONFIG_TID. see %enum nl80211_tid_config.
+ * Its type is u8, if the peer MAC address is passed in %NL80211_ATTR_MAC,
+ * then the noack configuration is applied to the data frame for the tid
+ * to that connected station. This configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, then this
+ * configuration should be treated as per-netdev configuration.
+ * This configuration will be cleared when the interface goes down and on
+ * the disconnection from a BSS. Driver supporting this feature should
+ * advertise NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG and
+ * NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG for supporting per sta
+ * configuration.
+ */
+enum nl80211_attr_tid_config {
+ __NL80211_ATTR_TID_INVALID,
+ NL80211_ATTR_TID_CONFIG_TID,
+ NL80211_ATTR_TID_CONFIG_NOACK,
+
+ /* keep last */
+ __NL80211_ATTR_TID_CONFIG_AFTER_LAST,
+ NL80211_ATTR_TID_CONFIG_MAX = __NL80211_ATTR_TID_CONFIG_AFTER_LAST - 1
+};
+
/**
* enum nl80211_packet_pattern_attr - packet pattern attribute
* @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
@@ -5343,6 +5387,11 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
* (set/del PMKSA operations) in AP mode.
*
+ * @NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG: Driver supports per TID NoAck
+ * policy functionality.
+ * @NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG: Driver supports STA specific NoAck
+ * policy functionality.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5384,6 +5433,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 25a9e3b..f0e44ee 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -280,6 +280,13 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_NESTED_ARRAY(nl80211_psmr_peer_attr_policy),
};
+static const struct nla_policy
+nl80211_attr_tid_config_policy[NL80211_ATTR_TID_CONFIG_MAX + 1] = {
+ [NL80211_ATTR_TID_CONFIG_TID] = { .type = NLA_U8 },
+ [NL80211_ATTR_TID_CONFIG_NOACK] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+};
+
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
@@ -541,6 +548,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_PEER_MEASUREMENTS] =
NLA_POLICY_NESTED(nl80211_pmsr_attr_policy),
[NL80211_ATTR_AIRTIME_WEIGHT] = NLA_POLICY_MIN(NLA_U16, 1),
+ [NL80211_ATTR_TID_CONFIG] =
+ NLA_POLICY_NESTED(nl80211_attr_tid_config_policy),
};
/* policy for the key attributes */
@@ -13259,6 +13268,91 @@ static int nl80211_get_ftm_responder_stats(struct sk_buff *skb,
return -ENOBUFS;
}
+static int parse_tid_conf(struct cfg80211_registered_device *rdev,
+ struct nlattr *attrs[],
+ struct ieee80211_tid_cfg *tid_conf,
+ const u8 *peer)
+{
+ tid_conf->tid = nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_TID]);
+ if (attrs[NL80211_ATTR_TID_CONFIG_NOACK]) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG))
+ return -ENOTSUPP;
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG))
+ return -ENOTSUPP;
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_NOACK;
+ tid_conf->noack =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_NOACK]);
+ }
+
+ return 0;
+}
+
+static int nl80211_set_tid_config(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct nlattr *attrs[NL80211_ATTR_TID_CONFIG_MAX + 1];
+ struct net_device *dev = info->user_ptr[1];
+ struct ieee80211_tid_config *tid_conf;
+ struct nlattr *tid;
+ int conf_idx = 0, rem_conf;
+ u32 num_conf = 0, size_of_conf;
+ int ret = -EINVAL;
+
+ if (!info->attrs[NL80211_ATTR_TID_CONFIG])
+ return -EINVAL;
+
+ if (!rdev->ops->set_tid_config)
+ return -EOPNOTSUPP;
+
+ nla_for_each_nested(tid, info->attrs[NL80211_ATTR_TID_CONFIG],
+ rem_conf)
+ num_conf++;
+
+ size_of_conf = sizeof(struct ieee80211_tid_config) +
+ num_conf * sizeof(struct ieee80211_tid_cfg);
+
+ tid_conf = kzalloc(size_of_conf, GFP_KERNEL);
+ if (!tid_conf)
+ return -ENOMEM;
+
+ tid_conf->n_tid_conf = num_conf;
+
+ if (info->attrs[NL80211_ATTR_MAC])
+ tid_conf->peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
+ else
+ tid_conf->peer = NULL;
+
+ nla_for_each_nested(tid, info->attrs[NL80211_ATTR_TID_CONFIG],
+ rem_conf) {
+ ret = nla_parse_nested(attrs, NL80211_ATTR_TID_CONFIG_MAX, tid,
+ NULL, NULL);
+
+ if (ret)
+ return ret;
+
+ if (!attrs[NL80211_ATTR_TID_CONFIG_TID])
+ return -EINVAL;
+
+ ret = parse_tid_conf(rdev, attrs, &tid_conf->tid_conf[conf_idx],
+ tid_conf->peer);
+ if (ret)
+ goto bad_tid_conf;
+
+ conf_idx++;
+ }
+
+ ret = rdev_set_tid_config(rdev, dev, tid_conf);
+
+bad_tid_conf:
+ kfree(tid_conf);
+ return ret;
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -14193,6 +14287,14 @@ static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_SET_TID_CONFIG,
+ .doit = nl80211_set_tid_config,
+ .policy = nl80211_policy,
+ .flags = GENL_UNS_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_family nl80211_fam __ro_after_init = {
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 5cb48d1..59e1905 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -1272,4 +1272,15 @@ static inline int rdev_del_pmk(struct cfg80211_registered_device *rdev,
trace_rdev_return_void(&rdev->wiphy);
}
+static inline int rdev_set_tid_config(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf)
+{
+ int ret;
+
+ trace_rdev_set_tid_config(&rdev->wiphy, dev, tid_conf);
+ ret = rdev->ops->set_tid_config(&rdev->wiphy, dev, tid_conf);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
#endif /* __CFG80211_RDEV_OPS */
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 44b2ce1..186de1f 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -3362,6 +3362,24 @@
WIPHY_PR_ARG, WDEV_PR_ARG,
(unsigned long long)__entry->cookie)
);
+
+TRACE_EVENT(rdev_set_tid_config,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ struct ieee80211_tid_config *tid_conf),
+ TP_ARGS(wiphy, netdev, tid_conf),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ MAC_ENTRY(peer)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ MAC_ASSIGN(peer, tid_conf->peer);
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", peer: " MAC_PR_FMT,
+ WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer))
+);
#endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */
#undef TRACE_INCLUDE_PATH
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 2/9] nl80211: Add new netlink attribute for TID speicific retry count
2019-03-11 6:48 ` Tamizh chelvam
@ 2019-03-11 6:48 ` Tamizh chelvam
-1 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
This patch introduced below NL attributes to add support for
configuring data TID specific retry count
NL80211_ATTR_TID_CONFIG_RETRY
NL80211_ATTR_TID_CONFIG_RETRY_LONG
NL80211_ATTR_TID_CONFIG_RETRY_SHORT
These attributes are added in NL80211_ATTR_TID_CONFIG nested attribute.
This will be useful for the driver which supports data TID specific retry
count configuration rather using phy level retry configuration.
This TID specific retry configuration will have more precedence than
phy level configuration. This configuration can be applied for a
specific peer. To apply this configuration specific to a peer
rather than being applied for all the connected stations,
MAC address of the peer can be passed in NL80211_ATTR_MAC attribute.
Driver should advertise WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT and
max_data_retry_count value to notify user space to avoid of passing
greater than the allowed limit.
Driver supporting TID specific retry configuration should advertise
NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG and per STA specific
data TID retry configuration should advertise
NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 11 ++++++++++
include/uapi/linux/nl80211.h | 48 ++++++++++++++++++++++++++++++++++++++++++
net/wireless/nl80211.c | 34 ++++++++++++++++++++++++++++++
3 files changed, 93 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index c606e78..888de00 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -511,6 +511,7 @@ struct cfg80211_chan_def {
enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_NOACK = BIT(0),
+ IEEE80211_TID_CONF_RETRY = BIT(1),
};
/**
@@ -519,11 +520,15 @@ enum ieee80211_tid_conf_mask {
* @tid_conf_mask: bitmap indicating which parameter changed
* see %enum ieee80211_tid_conf_mask
* @noack: noack configuration value for the TID
+ * @retry_long: retry count value
+ * @retry_short: retry count value
*/
struct ieee80211_tid_cfg {
u8 tid;
enum ieee80211_tid_conf_mask tid_conf_mask;
u8 noack;
+ int retry_long;
+ int retry_short;
};
/**
@@ -3832,6 +3837,7 @@ struct cfg80211_ops {
* beaconing mode (AP, IBSS, Mesh, ...).
* @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation
* before connection.
+ * @WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT: Device supports data retry count call.
*/
enum wiphy_flags {
/* use hole at 0 */
@@ -3858,6 +3864,7 @@ enum wiphy_flags {
WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22),
WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23),
WIPHY_FLAG_HAS_STATIC_WEP = BIT(24),
+ WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT = BIT(25),
};
/**
@@ -4365,6 +4372,8 @@ struct cfg80211_pmsr_capabilities {
* @support_mbssid must be set for this to have any effect.
*
* @pmsr_capa: peer measurement capabilities
+ * @max_data_retry_count: Maximum limit can be configured as retry count
+ * for a TID.
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -4509,6 +4518,8 @@ struct wiphy {
const struct cfg80211_pmsr_capabilities *pmsr_capa;
+ u8 max_data_retry_count;
+
char priv[0] __aligned(NETDEV_ALIGN);
};
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index c901a48..f2ce845 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2316,6 +2316,8 @@ enum nl80211_commands {
*
* @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
* nested attribute with %NL80211_ATTR_TID_* sub-attributes.
+ * @NL80211_ATTR_MAX_RETRY_COUNT: The upper limit for the retry count
+ * configuration that the driver can accept.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2769,6 +2771,7 @@ enum nl80211_attrs {
NL80211_ATTR_AIRTIME_WEIGHT,
NL80211_ATTR_TID_CONFIG,
+ NL80211_ATTR_MAX_RETRY_COUNT,
/* add attributes here, update the policy in nl80211.c */
@@ -4576,11 +4579,50 @@ enum nl80211_tid_config {
* advertise NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG and
* NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG for supporting per sta
* configuration.
+ * @NL80211_ATTR_TID_CONFIG_RETRY: Data TID retry count should be applied
+ * with the value passed through %NL80211_ATTR_TID_CONFIG_RETRY_LONG
+ * and/or %NL80211_ATTR_TID_CONFIG_RETRY_SHORT. This configuration
+ * is per-TID, and the TID is specified with %NL80211_ATTR_TID_CONFIG_TID.
+ * If the peer MAC address is passed in %NL80211_ATTR_MAC, the retry
+ * configuration is applied to the data frame for the tid to that
+ * connected station.
+ * This attribute will be useful to notfiy the driver to apply default
+ * retry values for the connected station (%NL80211_ATTR_MAC), when the
+ * command received without %NL80211_ATTR_RETRY_LONG and/or
+ * %NL80211_ATTR_RETRY_SHORT.
+ * Station specific retry configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. When retry count has never been configured using this command, the
+ * other available radio level retry configuration
+ * (%NL80211_ATTR_WIPHY_RETRY_SHORT and %NL80211_ATTR_WIPHY_RETRY_LONG)
+ * should be used. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG and supporting per station
+ * retry count configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG.
+ * @NL80211_ATTR_TID_CONFIG_RETRY_SHORT: Number of retries used with data frame
+ * transmission, user-space sets this configuration in
+ * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
+ * the max value should be advertised by the driver through
+ * max_data_retry_count. when this attribute is not present, the driver
+ * would use the default configuration.
+ * @NL80211_ATTR_TID_CONFIG_RETRY_LONG: Number of retries used with data frame
+ * transmission, user-space sets this configuration in
+ * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
+ * the max value should be advertised by the driver through
+ * max_data_retry_count. when this attribute is not present, the driver
+ * would use the default configuration.
*/
enum nl80211_attr_tid_config {
__NL80211_ATTR_TID_INVALID,
NL80211_ATTR_TID_CONFIG_TID,
NL80211_ATTR_TID_CONFIG_NOACK,
+ NL80211_ATTR_TID_CONFIG_RETRY,
+ NL80211_ATTR_TID_CONFIG_RETRY_SHORT,
+ NL80211_ATTR_TID_CONFIG_RETRY_LONG,
/* keep last */
__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5391,6 +5433,10 @@ enum nl80211_feature_flags {
* policy functionality.
* @NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG: Driver supports STA specific NoAck
* policy functionality.
+ * @NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG: Driver supports per TID data retry
+ * count functionality.
+ * @NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG: Driver supports STA specific
+ * data retry count functionality.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5435,6 +5481,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG,
NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
+ NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG,
+ NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index f0e44ee..d53eb40 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -285,6 +285,9 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_TID_CONFIG_TID] = { .type = NLA_U8 },
[NL80211_ATTR_TID_CONFIG_NOACK] =
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+ [NL80211_ATTR_TID_CONFIG_RETRY] = { .type = NLA_FLAG },
+ [NL80211_ATTR_TID_CONFIG_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 1),
+ [NL80211_ATTR_TID_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 1),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13288,6 +13291,37 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_NOACK]);
}
+ if (nla_get_flag(attrs[NL80211_ATTR_TID_CONFIG_RETRY])) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG))
+ return -ENOTSUPP;
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG))
+ return -ENOTSUPP;
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_RETRY;
+ if (attrs[NL80211_ATTR_TID_CONFIG_RETRY_SHORT]) {
+ tid_conf->retry_short =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RETRY_SHORT]);
+ if (tid_conf->retry_short >
+ rdev->wiphy.max_data_retry_count)
+ return -EINVAL;
+ } else {
+ tid_conf->retry_short = -1;
+ }
+
+ if (attrs[NL80211_ATTR_TID_CONFIG_RETRY_LONG]) {
+ tid_conf->retry_long =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RETRY_LONG]);
+ if (tid_conf->retry_long >
+ rdev->wiphy.max_data_retry_count)
+ return -EINVAL;
+ } else {
+ tid_conf->retry_long = -1;
+ }
+ }
+
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 2/9] nl80211: Add new netlink attribute for TID speicific retry count
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
This patch introduced below NL attributes to add support for
configuring data TID specific retry count
NL80211_ATTR_TID_CONFIG_RETRY
NL80211_ATTR_TID_CONFIG_RETRY_LONG
NL80211_ATTR_TID_CONFIG_RETRY_SHORT
These attributes are added in NL80211_ATTR_TID_CONFIG nested attribute.
This will be useful for the driver which supports data TID specific retry
count configuration rather using phy level retry configuration.
This TID specific retry configuration will have more precedence than
phy level configuration. This configuration can be applied for a
specific peer. To apply this configuration specific to a peer
rather than being applied for all the connected stations,
MAC address of the peer can be passed in NL80211_ATTR_MAC attribute.
Driver should advertise WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT and
max_data_retry_count value to notify user space to avoid of passing
greater than the allowed limit.
Driver supporting TID specific retry configuration should advertise
NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG and per STA specific
data TID retry configuration should advertise
NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 11 ++++++++++
include/uapi/linux/nl80211.h | 48 ++++++++++++++++++++++++++++++++++++++++++
net/wireless/nl80211.c | 34 ++++++++++++++++++++++++++++++
3 files changed, 93 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index c606e78..888de00 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -511,6 +511,7 @@ struct cfg80211_chan_def {
enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_NOACK = BIT(0),
+ IEEE80211_TID_CONF_RETRY = BIT(1),
};
/**
@@ -519,11 +520,15 @@ enum ieee80211_tid_conf_mask {
* @tid_conf_mask: bitmap indicating which parameter changed
* see %enum ieee80211_tid_conf_mask
* @noack: noack configuration value for the TID
+ * @retry_long: retry count value
+ * @retry_short: retry count value
*/
struct ieee80211_tid_cfg {
u8 tid;
enum ieee80211_tid_conf_mask tid_conf_mask;
u8 noack;
+ int retry_long;
+ int retry_short;
};
/**
@@ -3832,6 +3837,7 @@ struct cfg80211_ops {
* beaconing mode (AP, IBSS, Mesh, ...).
* @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation
* before connection.
+ * @WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT: Device supports data retry count call.
*/
enum wiphy_flags {
/* use hole at 0 */
@@ -3858,6 +3864,7 @@ enum wiphy_flags {
WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22),
WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23),
WIPHY_FLAG_HAS_STATIC_WEP = BIT(24),
+ WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT = BIT(25),
};
/**
@@ -4365,6 +4372,8 @@ struct cfg80211_pmsr_capabilities {
* @support_mbssid must be set for this to have any effect.
*
* @pmsr_capa: peer measurement capabilities
+ * @max_data_retry_count: Maximum limit can be configured as retry count
+ * for a TID.
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -4509,6 +4518,8 @@ struct wiphy {
const struct cfg80211_pmsr_capabilities *pmsr_capa;
+ u8 max_data_retry_count;
+
char priv[0] __aligned(NETDEV_ALIGN);
};
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index c901a48..f2ce845 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2316,6 +2316,8 @@ enum nl80211_commands {
*
* @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
* nested attribute with %NL80211_ATTR_TID_* sub-attributes.
+ * @NL80211_ATTR_MAX_RETRY_COUNT: The upper limit for the retry count
+ * configuration that the driver can accept.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2769,6 +2771,7 @@ enum nl80211_attrs {
NL80211_ATTR_AIRTIME_WEIGHT,
NL80211_ATTR_TID_CONFIG,
+ NL80211_ATTR_MAX_RETRY_COUNT,
/* add attributes here, update the policy in nl80211.c */
@@ -4576,11 +4579,50 @@ enum nl80211_tid_config {
* advertise NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG and
* NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG for supporting per sta
* configuration.
+ * @NL80211_ATTR_TID_CONFIG_RETRY: Data TID retry count should be applied
+ * with the value passed through %NL80211_ATTR_TID_CONFIG_RETRY_LONG
+ * and/or %NL80211_ATTR_TID_CONFIG_RETRY_SHORT. This configuration
+ * is per-TID, and the TID is specified with %NL80211_ATTR_TID_CONFIG_TID.
+ * If the peer MAC address is passed in %NL80211_ATTR_MAC, the retry
+ * configuration is applied to the data frame for the tid to that
+ * connected station.
+ * This attribute will be useful to notfiy the driver to apply default
+ * retry values for the connected station (%NL80211_ATTR_MAC), when the
+ * command received without %NL80211_ATTR_RETRY_LONG and/or
+ * %NL80211_ATTR_RETRY_SHORT.
+ * Station specific retry configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. When retry count has never been configured using this command, the
+ * other available radio level retry configuration
+ * (%NL80211_ATTR_WIPHY_RETRY_SHORT and %NL80211_ATTR_WIPHY_RETRY_LONG)
+ * should be used. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG and supporting per station
+ * retry count configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG.
+ * @NL80211_ATTR_TID_CONFIG_RETRY_SHORT: Number of retries used with data frame
+ * transmission, user-space sets this configuration in
+ * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
+ * the max value should be advertised by the driver through
+ * max_data_retry_count. when this attribute is not present, the driver
+ * would use the default configuration.
+ * @NL80211_ATTR_TID_CONFIG_RETRY_LONG: Number of retries used with data frame
+ * transmission, user-space sets this configuration in
+ * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
+ * the max value should be advertised by the driver through
+ * max_data_retry_count. when this attribute is not present, the driver
+ * would use the default configuration.
*/
enum nl80211_attr_tid_config {
__NL80211_ATTR_TID_INVALID,
NL80211_ATTR_TID_CONFIG_TID,
NL80211_ATTR_TID_CONFIG_NOACK,
+ NL80211_ATTR_TID_CONFIG_RETRY,
+ NL80211_ATTR_TID_CONFIG_RETRY_SHORT,
+ NL80211_ATTR_TID_CONFIG_RETRY_LONG,
/* keep last */
__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5391,6 +5433,10 @@ enum nl80211_feature_flags {
* policy functionality.
* @NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG: Driver supports STA specific NoAck
* policy functionality.
+ * @NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG: Driver supports per TID data retry
+ * count functionality.
+ * @NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG: Driver supports STA specific
+ * data retry count functionality.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5435,6 +5481,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG,
NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
+ NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG,
+ NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index f0e44ee..d53eb40 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -285,6 +285,9 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_TID_CONFIG_TID] = { .type = NLA_U8 },
[NL80211_ATTR_TID_CONFIG_NOACK] =
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+ [NL80211_ATTR_TID_CONFIG_RETRY] = { .type = NLA_FLAG },
+ [NL80211_ATTR_TID_CONFIG_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 1),
+ [NL80211_ATTR_TID_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 1),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13288,6 +13291,37 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_NOACK]);
}
+ if (nla_get_flag(attrs[NL80211_ATTR_TID_CONFIG_RETRY])) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG))
+ return -ENOTSUPP;
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG))
+ return -ENOTSUPP;
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_RETRY;
+ if (attrs[NL80211_ATTR_TID_CONFIG_RETRY_SHORT]) {
+ tid_conf->retry_short =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RETRY_SHORT]);
+ if (tid_conf->retry_short >
+ rdev->wiphy.max_data_retry_count)
+ return -EINVAL;
+ } else {
+ tid_conf->retry_short = -1;
+ }
+
+ if (attrs[NL80211_ATTR_TID_CONFIG_RETRY_LONG]) {
+ tid_conf->retry_long =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RETRY_LONG]);
+ if (tid_conf->retry_long >
+ rdev->wiphy.max_data_retry_count)
+ return -EINVAL;
+ } else {
+ tid_conf->retry_long = -1;
+ }
+ }
+
return 0;
}
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable
2019-03-11 6:48 ` Tamizh chelvam
@ 2019-03-11 6:48 ` Tamizh chelvam
-1 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Introduce NL80211_ATTR_TID_CONFIG_AMPDU_CTRL in nl80211_attr_tid_config
to accept TID specific AMPDU aggregation enable/disable configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
aggregation control configuration is to be applied is passed in
NL80211_ATTR_TID_CONFIG_TID attribute. When the user-space wants this
configuration peer specific rather than being applied for all the
connected stations, MAC address of the peer can be passed in
NL80211_ATTR_MAC attribute.
Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per-STA data TID
ampdu configuration should advertise NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 3 +++
include/uapi/linux/nl80211.h | 22 ++++++++++++++++++++++
net/wireless/nl80211.c | 15 +++++++++++++++
3 files changed, 40 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 888de00..aa0f44c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -512,6 +512,7 @@ struct cfg80211_chan_def {
enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_NOACK = BIT(0),
IEEE80211_TID_CONF_RETRY = BIT(1),
+ IEEE80211_TID_CONF_AMPDU = BIT(2),
};
/**
@@ -522,6 +523,7 @@ enum ieee80211_tid_conf_mask {
* @noack: noack configuration value for the TID
* @retry_long: retry count value
* @retry_short: retry count value
+ * @ampdu: Enable/Disable aggregation
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -529,6 +531,7 @@ struct ieee80211_tid_cfg {
u8 noack;
int retry_long;
int retry_short;
+ u8 ampdu;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f2ce845..f94651d 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4615,6 +4615,21 @@ enum nl80211_tid_config {
* the max value should be advertised by the driver through
* max_data_retry_count. when this attribute is not present, the driver
* would use the default configuration.
+ * @NL80211_ATTR_TID_CONFIG_AMPDU_CTRL: Enable/Disable aggregation for the TID
+ * specified in %%NL80211_ATTR_TID_CONFIG_TID. Its type is u8,
+ * if the peer MAC address is passed in %NL80211_ATTR_MAC, the aggregation
+ * configuration is applied
+ * to the data frame for the tid to that connected station.
+ * Station specific aggregation configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per station
+ * aggregation configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
*/
enum nl80211_attr_tid_config {
__NL80211_ATTR_TID_INVALID,
@@ -4623,6 +4638,7 @@ enum nl80211_attr_tid_config {
NL80211_ATTR_TID_CONFIG_RETRY,
NL80211_ATTR_TID_CONFIG_RETRY_SHORT,
NL80211_ATTR_TID_CONFIG_RETRY_LONG,
+ NL80211_ATTR_TID_CONFIG_AMPDU_CTRL,
/* keep last */
__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5437,6 +5453,10 @@ enum nl80211_feature_flags {
* count functionality.
* @NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG: Driver supports STA specific
* data retry count functionality.
+ * @NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL: Driver supports TID specific
+ * aggregation control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL: Driver supports per STA
+ * specific TID aggregation control(enable/disable).
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5483,6 +5503,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG,
NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d53eb40..1a001d0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -288,6 +288,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_TID_CONFIG_RETRY] = { .type = NLA_FLAG },
[NL80211_ATTR_TID_CONFIG_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 1),
[NL80211_ATTR_TID_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 1),
+ [NL80211_ATTR_TID_CONFIG_AMPDU_CTRL] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13322,6 +13324,19 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
}
}
+ if (attrs[NL80211_ATTR_TID_CONFIG_AMPDU_CTRL]) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL))
+ return -ENOTSUPP;
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL))
+ return -ENOTSUPP;
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_AMPDU;
+ tid_conf->ampdu =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_AMPDU_CTRL]);
+ }
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Introduce NL80211_ATTR_TID_CONFIG_AMPDU_CTRL in nl80211_attr_tid_config
to accept TID specific AMPDU aggregation enable/disable configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
aggregation control configuration is to be applied is passed in
NL80211_ATTR_TID_CONFIG_TID attribute. When the user-space wants this
configuration peer specific rather than being applied for all the
connected stations, MAC address of the peer can be passed in
NL80211_ATTR_MAC attribute.
Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per-STA data TID
ampdu configuration should advertise NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 3 +++
include/uapi/linux/nl80211.h | 22 ++++++++++++++++++++++
net/wireless/nl80211.c | 15 +++++++++++++++
3 files changed, 40 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 888de00..aa0f44c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -512,6 +512,7 @@ struct cfg80211_chan_def {
enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_NOACK = BIT(0),
IEEE80211_TID_CONF_RETRY = BIT(1),
+ IEEE80211_TID_CONF_AMPDU = BIT(2),
};
/**
@@ -522,6 +523,7 @@ enum ieee80211_tid_conf_mask {
* @noack: noack configuration value for the TID
* @retry_long: retry count value
* @retry_short: retry count value
+ * @ampdu: Enable/Disable aggregation
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -529,6 +531,7 @@ struct ieee80211_tid_cfg {
u8 noack;
int retry_long;
int retry_short;
+ u8 ampdu;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f2ce845..f94651d 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4615,6 +4615,21 @@ enum nl80211_tid_config {
* the max value should be advertised by the driver through
* max_data_retry_count. when this attribute is not present, the driver
* would use the default configuration.
+ * @NL80211_ATTR_TID_CONFIG_AMPDU_CTRL: Enable/Disable aggregation for the TID
+ * specified in %%NL80211_ATTR_TID_CONFIG_TID. Its type is u8,
+ * if the peer MAC address is passed in %NL80211_ATTR_MAC, the aggregation
+ * configuration is applied
+ * to the data frame for the tid to that connected station.
+ * Station specific aggregation configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per station
+ * aggregation configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
*/
enum nl80211_attr_tid_config {
__NL80211_ATTR_TID_INVALID,
@@ -4623,6 +4638,7 @@ enum nl80211_attr_tid_config {
NL80211_ATTR_TID_CONFIG_RETRY,
NL80211_ATTR_TID_CONFIG_RETRY_SHORT,
NL80211_ATTR_TID_CONFIG_RETRY_LONG,
+ NL80211_ATTR_TID_CONFIG_AMPDU_CTRL,
/* keep last */
__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5437,6 +5453,10 @@ enum nl80211_feature_flags {
* count functionality.
* @NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG: Driver supports STA specific
* data retry count functionality.
+ * @NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL: Driver supports TID specific
+ * aggregation control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL: Driver supports per STA
+ * specific TID aggregation control(enable/disable).
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5483,6 +5503,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG,
NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d53eb40..1a001d0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -288,6 +288,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_TID_CONFIG_RETRY] = { .type = NLA_FLAG },
[NL80211_ATTR_TID_CONFIG_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 1),
[NL80211_ATTR_TID_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 1),
+ [NL80211_ATTR_TID_CONFIG_AMPDU_CTRL] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13322,6 +13324,19 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
}
}
+ if (attrs[NL80211_ATTR_TID_CONFIG_AMPDU_CTRL]) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL))
+ return -ENOTSUPP;
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL))
+ return -ENOTSUPP;
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_AMPDU;
+ tid_conf->ampdu =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_AMPDU_CTRL]);
+ }
return 0;
}
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 4/9] nl80211: Add netlink attribute to enable/disable RTS_CTS
2019-03-11 6:48 ` Tamizh chelvam
@ 2019-03-11 6:48 ` Tamizh chelvam
-1 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Introduce NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL in nl80211_attr_tid_config
to accept TID specific RTS_CTS enable/disable configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
RTS_CTS control configuration is to be applied is passed in
NL80211_ATTR_TID_CONFIG_TID attribute. When the user-space wants this
configuration peer specific rather than being applied for all the
connected stations, MAC address of the peer can be passed in
NL80211_ATTR_MAC attribute.
Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per-STA data TID
RTS_CTS configuration should advertise NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 3 +++
include/uapi/linux/nl80211.h | 22 ++++++++++++++++++++++
net/wireless/nl80211.c | 17 +++++++++++++++++
3 files changed, 42 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index aa0f44c..86dee3d 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -513,6 +513,7 @@ enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_NOACK = BIT(0),
IEEE80211_TID_CONF_RETRY = BIT(1),
IEEE80211_TID_CONF_AMPDU = BIT(2),
+ IEEE80211_TID_CONF_RTSCTS = BIT(3),
};
/**
@@ -524,6 +525,7 @@ enum ieee80211_tid_conf_mask {
* @retry_long: retry count value
* @retry_short: retry count value
* @ampdu: Enable/Disable aggregation
+ * @rtscts: Enable/Disable RTS/CTS
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -532,6 +534,7 @@ struct ieee80211_tid_cfg {
int retry_long;
int retry_short;
u8 ampdu;
+ u8 rtscts;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f94651d..996b4d4 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4630,6 +4630,21 @@ enum nl80211_tid_config {
* NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per station
* aggregation configuration should advertise
* NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
+ * @NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TID
+ * specified in %%NL80211_ATTR_TID_CONFIG_TID. It is u8 type, if the
+ * peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ * configuration is applied to the data frame for the tid to that
+ * connected station.
+ * Station specific RTS_CTS configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
+ * RTS_CTS configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
*/
enum nl80211_attr_tid_config {
__NL80211_ATTR_TID_INVALID,
@@ -4639,6 +4654,7 @@ enum nl80211_attr_tid_config {
NL80211_ATTR_TID_CONFIG_RETRY_SHORT,
NL80211_ATTR_TID_CONFIG_RETRY_LONG,
NL80211_ATTR_TID_CONFIG_AMPDU_CTRL,
+ NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL,
/* keep last */
__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5457,6 +5473,10 @@ enum nl80211_feature_flags {
* aggregation control(enable/disable).
* @NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL: Driver supports per STA
* specific TID aggregation control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL: Driver supports TID specific
+ * RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
+ * RTS_CTS control(enable/disable).
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5505,6 +5525,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL,
NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
+ NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
+ NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 1a001d0..47bfc62 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -290,6 +290,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_TID_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 1),
[NL80211_ATTR_TID_CONFIG_AMPDU_CTRL] =
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+ [NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13337,6 +13339,21 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
tid_conf->ampdu =
nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_AMPDU_CTRL]);
}
+
+ if (attrs[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL]) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL))
+ return -ENOTSUPP;
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL))
+ return -ENOTSUPP;
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_RTSCTS;
+ tid_conf->rtscts =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL]);
+ }
+
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 4/9] nl80211: Add netlink attribute to enable/disable RTS_CTS
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Introduce NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL in nl80211_attr_tid_config
to accept TID specific RTS_CTS enable/disable configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
RTS_CTS control configuration is to be applied is passed in
NL80211_ATTR_TID_CONFIG_TID attribute. When the user-space wants this
configuration peer specific rather than being applied for all the
connected stations, MAC address of the peer can be passed in
NL80211_ATTR_MAC attribute.
Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per-STA data TID
RTS_CTS configuration should advertise NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 3 +++
include/uapi/linux/nl80211.h | 22 ++++++++++++++++++++++
net/wireless/nl80211.c | 17 +++++++++++++++++
3 files changed, 42 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index aa0f44c..86dee3d 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -513,6 +513,7 @@ enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_NOACK = BIT(0),
IEEE80211_TID_CONF_RETRY = BIT(1),
IEEE80211_TID_CONF_AMPDU = BIT(2),
+ IEEE80211_TID_CONF_RTSCTS = BIT(3),
};
/**
@@ -524,6 +525,7 @@ enum ieee80211_tid_conf_mask {
* @retry_long: retry count value
* @retry_short: retry count value
* @ampdu: Enable/Disable aggregation
+ * @rtscts: Enable/Disable RTS/CTS
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -532,6 +534,7 @@ struct ieee80211_tid_cfg {
int retry_long;
int retry_short;
u8 ampdu;
+ u8 rtscts;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f94651d..996b4d4 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4630,6 +4630,21 @@ enum nl80211_tid_config {
* NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per station
* aggregation configuration should advertise
* NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
+ * @NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TID
+ * specified in %%NL80211_ATTR_TID_CONFIG_TID. It is u8 type, if the
+ * peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ * configuration is applied to the data frame for the tid to that
+ * connected station.
+ * Station specific RTS_CTS configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
+ * RTS_CTS configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
*/
enum nl80211_attr_tid_config {
__NL80211_ATTR_TID_INVALID,
@@ -4639,6 +4654,7 @@ enum nl80211_attr_tid_config {
NL80211_ATTR_TID_CONFIG_RETRY_SHORT,
NL80211_ATTR_TID_CONFIG_RETRY_LONG,
NL80211_ATTR_TID_CONFIG_AMPDU_CTRL,
+ NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL,
/* keep last */
__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5457,6 +5473,10 @@ enum nl80211_feature_flags {
* aggregation control(enable/disable).
* @NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL: Driver supports per STA
* specific TID aggregation control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL: Driver supports TID specific
+ * RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
+ * RTS_CTS control(enable/disable).
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5505,6 +5525,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL,
NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
+ NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
+ NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 1a001d0..47bfc62 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -290,6 +290,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_TID_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 1),
[NL80211_ATTR_TID_CONFIG_AMPDU_CTRL] =
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+ [NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13337,6 +13339,21 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
tid_conf->ampdu =
nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_AMPDU_CTRL]);
}
+
+ if (attrs[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL]) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL))
+ return -ENOTSUPP;
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL))
+ return -ENOTSUPP;
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_RTSCTS;
+ tid_conf->rtscts =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL]);
+ }
+
return 0;
}
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 5/9] nl80211: Add netlink attribute to configure TID specific tx rate
2019-03-11 6:48 ` Tamizh chelvam
@ 2019-03-11 6:48 ` Tamizh chelvam
-1 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Introduce NL80211_ATTR_TID_CONFIG_TX_RATES in nl80211_attr_tid_config
to accept data TID specific TX bitrate configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
this configuration is to be applied is passed in
NL80211_ATTR_TID_CONFIG_TID attribute. TX bitrate mask values passed
in NL80211_ATTR_TX_RATES attribute and NL80211_ATTR_TID_CONFIG_TX_RATES
attribute will have types of the TX rate should be applied.
When the user-space wants this configuration peer specific
rather than being applied for all the connected stations,
MAC address of the peer can be passed in NL80211_ATTR_MAC attribute.
Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per-STA data TID
TX bitrate configuration should advertise
NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 5 +++
include/uapi/linux/nl80211.h | 39 ++++++++++++++++++
net/wireless/nl80211.c | 89 ++++++++++++++++++++++++++++++++----------
3 files changed, 113 insertions(+), 20 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 86dee3d..ebf041b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -514,6 +514,7 @@ enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_RETRY = BIT(1),
IEEE80211_TID_CONF_AMPDU = BIT(2),
IEEE80211_TID_CONF_RTSCTS = BIT(3),
+ IEEE80211_TID_CONF_TX_BITRATE = BIT(4),
};
/**
@@ -526,6 +527,8 @@ enum ieee80211_tid_conf_mask {
* @retry_short: retry count value
* @ampdu: Enable/Disable aggregation
* @rtscts: Enable/Disable RTS/CTS
+ * @txrate_type: TX bitrate mask type
+ * @mask: bitrate to be applied for the TID
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -535,6 +538,8 @@ struct ieee80211_tid_cfg {
int retry_short;
u8 ampdu;
u8 rtscts;
+ enum nl80211_tx_rate_setting txrate_type;
+ struct cfg80211_bitrate_mask *mask;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 996b4d4..c8aa3ba 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4557,6 +4557,18 @@ enum nl80211_tx_power_setting {
NL80211_TX_POWER_FIXED,
};
+/**
+ * enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+ NL80211_TX_RATE_AUTOMATIC,
+ NL80211_TX_RATE_LIMITED,
+ NL80211_TX_RATE_FIXED,
+};
+
enum nl80211_tid_config {
NL80211_TID_CONFIG_DEFAULT,
NL80211_TID_CONFIG_ENABLE,
@@ -4645,6 +4657,25 @@ enum nl80211_tid_config {
* NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
* RTS_CTS configuration should advertise
* NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
+ * @NL80211_ATTR_TID_CONFIG_TX_RATES: Data frame TX rate mask should be applied
+ * with the parameters passed through %NL80211_ATTR_TX_RATES. This
+ * configuration is per TID, TID is specified with
+ * %NL80211_ATTR_TID_CONFIG_TID.
+ * If the peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ * configuration is applied to the data frame for the tid to that connected
+ * station. This attribute will be useful to notfiy the driver that what
+ * type of txrate should be applied(%enum enum nl80211_tx_rate_setting)
+ * for the connected station (%NL80211_ATTR_MAC),
+ * Station specific retry configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per station
+ * TX bitrate configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
*/
enum nl80211_attr_tid_config {
__NL80211_ATTR_TID_INVALID,
@@ -4655,6 +4686,8 @@ enum nl80211_attr_tid_config {
NL80211_ATTR_TID_CONFIG_RETRY_LONG,
NL80211_ATTR_TID_CONFIG_AMPDU_CTRL,
NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL,
+ NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE,
+ NL80211_ATTR_TID_CONFIG_TX_RATES,
/* keep last */
__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5477,6 +5510,10 @@ enum nl80211_feature_flags {
* RTS_CTS control(enable/disable).
* @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
* RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK: Driver supports TID specific
+ * TX bitrate configuration.
+ * @NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK: Driver supports STA specific
+ * TX bitrate configuration.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5527,6 +5564,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 47bfc62..1e46778 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -280,6 +280,15 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_NESTED_ARRAY(nl80211_psmr_peer_attr_policy),
};
+static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
+ [NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_RATES },
+ [NL80211_TXRATE_HT] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_HT_RATES },
+ [NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
+ [NL80211_TXRATE_GI] = { .type = NLA_U8 },
+};
+
static const struct nla_policy
nl80211_attr_tid_config_policy[NL80211_ATTR_TID_CONFIG_MAX + 1] = {
[NL80211_ATTR_TID_CONFIG_TID] = { .type = NLA_U8 },
@@ -292,6 +301,10 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL] =
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+ [NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TX_RATE_FIXED),
+ [NL80211_ATTR_TID_CONFIG_TX_RATES] =
+ NLA_POLICY_NESTED(nl80211_txattr_policy),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -397,7 +410,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_PMKID] = { .len = WLAN_PMKID_LEN },
[NL80211_ATTR_DURATION] = { .type = NLA_U32 },
[NL80211_ATTR_COOKIE] = { .type = NLA_U64 },
- [NL80211_ATTR_TX_RATES] = { .type = NLA_NESTED },
+ [NL80211_ATTR_TX_RATES] =
+ NLA_POLICY_NESTED(nl80211_txattr_policy),
[NL80211_ATTR_FRAME] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_FRAME_MATCH] = { .type = NLA_BINARY, },
@@ -4014,20 +4028,12 @@ static bool vht_set_mcs_mask(struct ieee80211_supported_band *sband,
return true;
}
-static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
- [NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
- .len = NL80211_MAX_SUPP_RATES },
- [NL80211_TXRATE_HT] = { .type = NLA_BINARY,
- .len = NL80211_MAX_SUPP_HT_RATES },
- [NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
- [NL80211_TXRATE_GI] = { .type = NLA_U8 },
-};
-
-static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
+static int nl80211_parse_tx_bitrate_mask(struct nlattr *attrs[],
+ struct cfg80211_registered_device *rdev,
+ enum nl80211_attrs attr,
struct cfg80211_bitrate_mask *mask)
{
struct nlattr *tb[NL80211_TXRATE_MAX + 1];
- struct cfg80211_registered_device *rdev = info->user_ptr[0];
int rem, i;
struct nlattr *tx_rates;
struct ieee80211_supported_band *sband;
@@ -4054,14 +4060,14 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
}
/* if no rates are given set it back to the defaults */
- if (!info->attrs[NL80211_ATTR_TX_RATES])
+ if (!attrs[attr])
goto out;
/* The nested attribute uses enum nl80211_band as the index. This maps
* directly to the enum nl80211_band values used in cfg80211.
*/
BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
- nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
+ nla_for_each_nested(tx_rates, attrs[attr], rem) {
enum nl80211_band band = nla_type(tx_rates);
int err;
@@ -4071,7 +4077,7 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
if (sband == NULL)
return -EINVAL;
err = nla_parse_nested(tb, NL80211_TXRATE_MAX, tx_rates,
- nl80211_txattr_policy, info->extack);
+ NULL, NULL);
if (err)
return err;
if (tb[NL80211_TXRATE_LEGACY]) {
@@ -4504,7 +4510,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (info->attrs[NL80211_ATTR_TX_RATES]) {
- err = nl80211_parse_tx_bitrate_mask(info, ¶ms.beacon_rate);
+ err = nl80211_parse_tx_bitrate_mask(info->attrs, rdev,
+ NL80211_ATTR_TX_RATES,
+ ¶ms.beacon_rate);
if (err)
return err;
@@ -10110,7 +10118,8 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
if (!rdev->ops->set_bitrate_mask)
return -EOPNOTSUPP;
- err = nl80211_parse_tx_bitrate_mask(info, &mask);
+ err = nl80211_parse_tx_bitrate_mask(info->attrs, rdev, NL80211_ATTR_TX_RATES,
+ &mask);
if (err)
return err;
@@ -10702,7 +10711,9 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
}
if (info->attrs[NL80211_ATTR_TX_RATES]) {
- err = nl80211_parse_tx_bitrate_mask(info, &setup.beacon_rate);
+ err = nl80211_parse_tx_bitrate_mask(info->attrs, rdev,
+ NL80211_ATTR_TX_RATES,
+ &setup.beacon_rate);
if (err)
return err;
@@ -13278,8 +13289,10 @@ static int nl80211_get_ftm_responder_stats(struct sk_buff *skb,
static int parse_tid_conf(struct cfg80211_registered_device *rdev,
struct nlattr *attrs[],
struct ieee80211_tid_cfg *tid_conf,
- const u8 *peer)
+ struct genl_info *info, const u8 *peer)
{
+ int ret;
+
tid_conf->tid = nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_TID]);
if (attrs[NL80211_ATTR_TID_CONFIG_NOACK]) {
if (!wiphy_ext_feature_isset(&rdev->wiphy,
@@ -13354,6 +13367,42 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL]);
}
+ if (attrs[NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE]) {
+ int idx;
+ enum nl80211_attrs attr;
+
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK))
+ return -EOPNOTSUPP;
+
+ if (peer &&
+ !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK))
+ return -EOPNOTSUPP;
+
+ idx = NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE;
+ tid_conf->txrate_type = nla_get_u8(attrs[idx]);
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_TX_BITRATE;
+ if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
+ tid_conf->mask =
+ kzalloc(sizeof(struct cfg80211_bitrate_mask),
+ GFP_KERNEL);
+ if (!tid_conf->mask)
+ return -ENOMEM;
+
+ attr = NL80211_ATTR_TID_CONFIG_TX_RATES;
+ ret = nl80211_parse_tx_bitrate_mask(attrs, rdev, attr,
+ tid_conf->mask);
+ if (ret) {
+ kfree(tid_conf->mask);
+ return ret;
+ }
+ } else {
+ tid_conf->mask = NULL;
+ }
+ }
+
return 0;
}
@@ -13405,7 +13454,7 @@ static int nl80211_set_tid_config(struct sk_buff *skb,
return -EINVAL;
ret = parse_tid_conf(rdev, attrs, &tid_conf->tid_conf[conf_idx],
- tid_conf->peer);
+ info, tid_conf->peer);
if (ret)
goto bad_tid_conf;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 5/9] nl80211: Add netlink attribute to configure TID specific tx rate
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Introduce NL80211_ATTR_TID_CONFIG_TX_RATES in nl80211_attr_tid_config
to accept data TID specific TX bitrate configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
this configuration is to be applied is passed in
NL80211_ATTR_TID_CONFIG_TID attribute. TX bitrate mask values passed
in NL80211_ATTR_TX_RATES attribute and NL80211_ATTR_TID_CONFIG_TX_RATES
attribute will have types of the TX rate should be applied.
When the user-space wants this configuration peer specific
rather than being applied for all the connected stations,
MAC address of the peer can be passed in NL80211_ATTR_MAC attribute.
Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per-STA data TID
TX bitrate configuration should advertise
NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 5 +++
include/uapi/linux/nl80211.h | 39 ++++++++++++++++++
net/wireless/nl80211.c | 89 ++++++++++++++++++++++++++++++++----------
3 files changed, 113 insertions(+), 20 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 86dee3d..ebf041b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -514,6 +514,7 @@ enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_RETRY = BIT(1),
IEEE80211_TID_CONF_AMPDU = BIT(2),
IEEE80211_TID_CONF_RTSCTS = BIT(3),
+ IEEE80211_TID_CONF_TX_BITRATE = BIT(4),
};
/**
@@ -526,6 +527,8 @@ enum ieee80211_tid_conf_mask {
* @retry_short: retry count value
* @ampdu: Enable/Disable aggregation
* @rtscts: Enable/Disable RTS/CTS
+ * @txrate_type: TX bitrate mask type
+ * @mask: bitrate to be applied for the TID
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -535,6 +538,8 @@ struct ieee80211_tid_cfg {
int retry_short;
u8 ampdu;
u8 rtscts;
+ enum nl80211_tx_rate_setting txrate_type;
+ struct cfg80211_bitrate_mask *mask;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 996b4d4..c8aa3ba 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4557,6 +4557,18 @@ enum nl80211_tx_power_setting {
NL80211_TX_POWER_FIXED,
};
+/**
+ * enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+ NL80211_TX_RATE_AUTOMATIC,
+ NL80211_TX_RATE_LIMITED,
+ NL80211_TX_RATE_FIXED,
+};
+
enum nl80211_tid_config {
NL80211_TID_CONFIG_DEFAULT,
NL80211_TID_CONFIG_ENABLE,
@@ -4645,6 +4657,25 @@ enum nl80211_tid_config {
* NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
* RTS_CTS configuration should advertise
* NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
+ * @NL80211_ATTR_TID_CONFIG_TX_RATES: Data frame TX rate mask should be applied
+ * with the parameters passed through %NL80211_ATTR_TX_RATES. This
+ * configuration is per TID, TID is specified with
+ * %NL80211_ATTR_TID_CONFIG_TID.
+ * If the peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ * configuration is applied to the data frame for the tid to that connected
+ * station. This attribute will be useful to notfiy the driver that what
+ * type of txrate should be applied(%enum enum nl80211_tx_rate_setting)
+ * for the connected station (%NL80211_ATTR_MAC),
+ * Station specific retry configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per station
+ * TX bitrate configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
*/
enum nl80211_attr_tid_config {
__NL80211_ATTR_TID_INVALID,
@@ -4655,6 +4686,8 @@ enum nl80211_attr_tid_config {
NL80211_ATTR_TID_CONFIG_RETRY_LONG,
NL80211_ATTR_TID_CONFIG_AMPDU_CTRL,
NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL,
+ NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE,
+ NL80211_ATTR_TID_CONFIG_TX_RATES,
/* keep last */
__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5477,6 +5510,10 @@ enum nl80211_feature_flags {
* RTS_CTS control(enable/disable).
* @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
* RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK: Driver supports TID specific
+ * TX bitrate configuration.
+ * @NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK: Driver supports STA specific
+ * TX bitrate configuration.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5527,6 +5564,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 47bfc62..1e46778 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -280,6 +280,15 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_NESTED_ARRAY(nl80211_psmr_peer_attr_policy),
};
+static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
+ [NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_RATES },
+ [NL80211_TXRATE_HT] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_HT_RATES },
+ [NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
+ [NL80211_TXRATE_GI] = { .type = NLA_U8 },
+};
+
static const struct nla_policy
nl80211_attr_tid_config_policy[NL80211_ATTR_TID_CONFIG_MAX + 1] = {
[NL80211_ATTR_TID_CONFIG_TID] = { .type = NLA_U8 },
@@ -292,6 +301,10 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL] =
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+ [NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TX_RATE_FIXED),
+ [NL80211_ATTR_TID_CONFIG_TX_RATES] =
+ NLA_POLICY_NESTED(nl80211_txattr_policy),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -397,7 +410,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_PMKID] = { .len = WLAN_PMKID_LEN },
[NL80211_ATTR_DURATION] = { .type = NLA_U32 },
[NL80211_ATTR_COOKIE] = { .type = NLA_U64 },
- [NL80211_ATTR_TX_RATES] = { .type = NLA_NESTED },
+ [NL80211_ATTR_TX_RATES] =
+ NLA_POLICY_NESTED(nl80211_txattr_policy),
[NL80211_ATTR_FRAME] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_FRAME_MATCH] = { .type = NLA_BINARY, },
@@ -4014,20 +4028,12 @@ static bool vht_set_mcs_mask(struct ieee80211_supported_band *sband,
return true;
}
-static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
- [NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
- .len = NL80211_MAX_SUPP_RATES },
- [NL80211_TXRATE_HT] = { .type = NLA_BINARY,
- .len = NL80211_MAX_SUPP_HT_RATES },
- [NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
- [NL80211_TXRATE_GI] = { .type = NLA_U8 },
-};
-
-static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
+static int nl80211_parse_tx_bitrate_mask(struct nlattr *attrs[],
+ struct cfg80211_registered_device *rdev,
+ enum nl80211_attrs attr,
struct cfg80211_bitrate_mask *mask)
{
struct nlattr *tb[NL80211_TXRATE_MAX + 1];
- struct cfg80211_registered_device *rdev = info->user_ptr[0];
int rem, i;
struct nlattr *tx_rates;
struct ieee80211_supported_band *sband;
@@ -4054,14 +4060,14 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
}
/* if no rates are given set it back to the defaults */
- if (!info->attrs[NL80211_ATTR_TX_RATES])
+ if (!attrs[attr])
goto out;
/* The nested attribute uses enum nl80211_band as the index. This maps
* directly to the enum nl80211_band values used in cfg80211.
*/
BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
- nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
+ nla_for_each_nested(tx_rates, attrs[attr], rem) {
enum nl80211_band band = nla_type(tx_rates);
int err;
@@ -4071,7 +4077,7 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
if (sband == NULL)
return -EINVAL;
err = nla_parse_nested(tb, NL80211_TXRATE_MAX, tx_rates,
- nl80211_txattr_policy, info->extack);
+ NULL, NULL);
if (err)
return err;
if (tb[NL80211_TXRATE_LEGACY]) {
@@ -4504,7 +4510,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (info->attrs[NL80211_ATTR_TX_RATES]) {
- err = nl80211_parse_tx_bitrate_mask(info, ¶ms.beacon_rate);
+ err = nl80211_parse_tx_bitrate_mask(info->attrs, rdev,
+ NL80211_ATTR_TX_RATES,
+ ¶ms.beacon_rate);
if (err)
return err;
@@ -10110,7 +10118,8 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
if (!rdev->ops->set_bitrate_mask)
return -EOPNOTSUPP;
- err = nl80211_parse_tx_bitrate_mask(info, &mask);
+ err = nl80211_parse_tx_bitrate_mask(info->attrs, rdev, NL80211_ATTR_TX_RATES,
+ &mask);
if (err)
return err;
@@ -10702,7 +10711,9 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
}
if (info->attrs[NL80211_ATTR_TX_RATES]) {
- err = nl80211_parse_tx_bitrate_mask(info, &setup.beacon_rate);
+ err = nl80211_parse_tx_bitrate_mask(info->attrs, rdev,
+ NL80211_ATTR_TX_RATES,
+ &setup.beacon_rate);
if (err)
return err;
@@ -13278,8 +13289,10 @@ static int nl80211_get_ftm_responder_stats(struct sk_buff *skb,
static int parse_tid_conf(struct cfg80211_registered_device *rdev,
struct nlattr *attrs[],
struct ieee80211_tid_cfg *tid_conf,
- const u8 *peer)
+ struct genl_info *info, const u8 *peer)
{
+ int ret;
+
tid_conf->tid = nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_TID]);
if (attrs[NL80211_ATTR_TID_CONFIG_NOACK]) {
if (!wiphy_ext_feature_isset(&rdev->wiphy,
@@ -13354,6 +13367,42 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL]);
}
+ if (attrs[NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE]) {
+ int idx;
+ enum nl80211_attrs attr;
+
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK))
+ return -EOPNOTSUPP;
+
+ if (peer &&
+ !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK))
+ return -EOPNOTSUPP;
+
+ idx = NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE;
+ tid_conf->txrate_type = nla_get_u8(attrs[idx]);
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_TX_BITRATE;
+ if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
+ tid_conf->mask =
+ kzalloc(sizeof(struct cfg80211_bitrate_mask),
+ GFP_KERNEL);
+ if (!tid_conf->mask)
+ return -ENOMEM;
+
+ attr = NL80211_ATTR_TID_CONFIG_TX_RATES;
+ ret = nl80211_parse_tx_bitrate_mask(attrs, rdev, attr,
+ tid_conf->mask);
+ if (ret) {
+ kfree(tid_conf->mask);
+ return ret;
+ }
+ } else {
+ tid_conf->mask = NULL;
+ }
+ }
+
return 0;
}
@@ -13405,7 +13454,7 @@ static int nl80211_set_tid_config(struct sk_buff *skb,
return -EINVAL;
ret = parse_tid_conf(rdev, attrs, &tid_conf->tid_conf[conf_idx],
- tid_conf->peer);
+ info, tid_conf->peer);
if (ret)
goto bad_tid_conf;
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 6/9] mac80211: Add api to support configuring TID specific configuration
2019-03-11 6:48 ` Tamizh chelvam
@ 2019-03-11 6:48 ` Tamizh chelvam
-1 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Implement drv_set_tid_config api to allow TID specific
configuration. This per-TID configuration
will be applied for all the connected stations when MAC is NULL.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/mac80211.h | 38 ++++++++++++++++++++++++++++++++++++++
net/mac80211/cfg.c | 28 ++++++++++++++++++++++++++++
net/mac80211/driver-ops.h | 15 +++++++++++++++
3 files changed, 81 insertions(+)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ac2ed8e..ead7605 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1556,6 +1556,8 @@ enum ieee80211_vif_flags {
IEEE80211_VIF_GET_NOA_UPDATE = BIT(3),
};
+#define IEEE80211_TID_MAX 8
+
/**
* struct ieee80211_vif - per-interface data
*
@@ -1593,6 +1595,13 @@ enum ieee80211_vif_flags {
* @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
* @txqs_stopped: per AC flag to indicate that intermediate TXQs are stopped,
* protected by fq->lock.
+ * @noack: per-TID noack policy.
+ * @retry_short: per-TID retry count.
+ * @retry_long: per-TID count.
+ * @ampdu: per-TID Aggregation-MPDU.
+ * @rate_ctrl: per-TID tx rate control type.
+ * @rate_code: per-TID tx rate code mask.
+ * @rtscts: per-TID RTSCTS policy.
*/
struct ieee80211_vif {
enum nl80211_iftype type;
@@ -1619,6 +1628,14 @@ struct ieee80211_vif {
bool txqs_stopped[IEEE80211_NUM_ACS];
+ int noack[IEEE80211_TID_MAX];
+ int retry_short[IEEE80211_TID_MAX];
+ int retry_long[IEEE80211_TID_MAX];
+ int ampdu[IEEE80211_TID_MAX];
+ u8 rate_ctrl[IEEE80211_TID_MAX];
+ u32 rate_code[IEEE80211_TID_MAX];
+ u8 rtscts[IEEE80211_TID_MAX];
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
@@ -1933,6 +1950,12 @@ struct ieee80211_sta_rates {
* @max_tid_amsdu_len: Maximum A-MSDU size in bytes for this TID
* @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that
* the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames
+ * @noack: per-TID noack policy.
+ * @retry_short: per-TID retry count.
+ * @retry_long: per-TID count.
+ * @ampdu: per-TID Aggregation-MPDU.
+ * @rate_ctrl: per-TID tx rate control type.
+ * @rtscts: per-TID RTSCTS policy.
*/
struct ieee80211_sta {
u32 supp_rates[NUM_NL80211_BANDS];
@@ -1976,6 +1999,13 @@ struct ieee80211_sta {
struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1];
+ int noack[IEEE80211_TID_MAX];
+ int retry_short[IEEE80211_TID_MAX];
+ int retry_long[IEEE80211_TID_MAX];
+ int ampdu[IEEE80211_TID_MAX];
+ u8 rate_ctrl[IEEE80211_TID_MAX];
+ u8 rtscts[IEEE80211_TID_MAX];
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
@@ -3707,6 +3737,10 @@ enum ieee80211_reconfig_type {
*
* @start_pmsr: start peer measurement (e.g. FTM) (this call can sleep)
* @abort_pmsr: abort peer measurement (this call can sleep)
+ * @set_tid_config: TID specific configurations will be applied for a particular
+ * station when @sta is non-NULL. When @sta is NULL, then the configuration
+ * will be for all the connected clients in the vif.
+ * This callback may sleep.
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
@@ -4004,6 +4038,10 @@ struct ieee80211_ops {
struct cfg80211_pmsr_request *request);
void (*abort_pmsr)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct cfg80211_pmsr_request *request);
+ int (*set_tid_config)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_tid_config *tid_conf);
};
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 09dd1c2..7d9c44d 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3893,6 +3893,33 @@ static int ieee80211_get_txq_stats(struct wiphy *wiphy,
return drv_abort_pmsr(local, sdata, request);
}
+static int ieee80211_set_tid_config(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct sta_info *sta;
+ int ret;
+
+ if (!sdata->local->ops->set_tid_config)
+ return -EOPNOTSUPP;
+
+ if (!tid_conf->peer)
+ return drv_set_tid_config(sdata->local, sdata, NULL, tid_conf);
+
+ mutex_lock(&sdata->local->sta_mtx);
+
+ sta = sta_info_get_bss(sdata, tid_conf->peer);
+ if (!sta) {
+ mutex_unlock(&sdata->local->sta_mtx);
+ return -ENOENT;
+ }
+
+ ret = drv_set_tid_config(sdata->local, sdata, &sta->sta, tid_conf);
+ mutex_unlock(&sdata->local->sta_mtx);
+ return ret;
+}
+
const struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
@@ -3990,4 +4017,5 @@ static int ieee80211_get_txq_stats(struct wiphy *wiphy,
.get_ftm_responder_stats = ieee80211_get_ftm_responder_stats,
.start_pmsr = ieee80211_start_pmsr,
.abort_pmsr = ieee80211_abort_pmsr,
+ .set_tid_config = ieee80211_set_tid_config,
};
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 28d022a..d316b18 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -1348,4 +1348,19 @@ static inline void drv_del_nan_func(struct ieee80211_local *local,
trace_drv_return_void(local);
}
+static inline int drv_set_tid_config(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_sta *sta,
+ struct ieee80211_tid_config *tid_conf)
+{
+ int ret;
+
+ might_sleep();
+ ret = local->ops->set_tid_config(&local->hw, &sdata->vif, sta,
+ tid_conf);
+ trace_drv_return_int(local, ret);
+
+ return ret;
+}
+
#endif /* __MAC80211_DRIVER_OPS */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 6/9] mac80211: Add api to support configuring TID specific configuration
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Implement drv_set_tid_config api to allow TID specific
configuration. This per-TID configuration
will be applied for all the connected stations when MAC is NULL.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/mac80211.h | 38 ++++++++++++++++++++++++++++++++++++++
net/mac80211/cfg.c | 28 ++++++++++++++++++++++++++++
net/mac80211/driver-ops.h | 15 +++++++++++++++
3 files changed, 81 insertions(+)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ac2ed8e..ead7605 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1556,6 +1556,8 @@ enum ieee80211_vif_flags {
IEEE80211_VIF_GET_NOA_UPDATE = BIT(3),
};
+#define IEEE80211_TID_MAX 8
+
/**
* struct ieee80211_vif - per-interface data
*
@@ -1593,6 +1595,13 @@ enum ieee80211_vif_flags {
* @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
* @txqs_stopped: per AC flag to indicate that intermediate TXQs are stopped,
* protected by fq->lock.
+ * @noack: per-TID noack policy.
+ * @retry_short: per-TID retry count.
+ * @retry_long: per-TID count.
+ * @ampdu: per-TID Aggregation-MPDU.
+ * @rate_ctrl: per-TID tx rate control type.
+ * @rate_code: per-TID tx rate code mask.
+ * @rtscts: per-TID RTSCTS policy.
*/
struct ieee80211_vif {
enum nl80211_iftype type;
@@ -1619,6 +1628,14 @@ struct ieee80211_vif {
bool txqs_stopped[IEEE80211_NUM_ACS];
+ int noack[IEEE80211_TID_MAX];
+ int retry_short[IEEE80211_TID_MAX];
+ int retry_long[IEEE80211_TID_MAX];
+ int ampdu[IEEE80211_TID_MAX];
+ u8 rate_ctrl[IEEE80211_TID_MAX];
+ u32 rate_code[IEEE80211_TID_MAX];
+ u8 rtscts[IEEE80211_TID_MAX];
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
@@ -1933,6 +1950,12 @@ struct ieee80211_sta_rates {
* @max_tid_amsdu_len: Maximum A-MSDU size in bytes for this TID
* @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that
* the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames
+ * @noack: per-TID noack policy.
+ * @retry_short: per-TID retry count.
+ * @retry_long: per-TID count.
+ * @ampdu: per-TID Aggregation-MPDU.
+ * @rate_ctrl: per-TID tx rate control type.
+ * @rtscts: per-TID RTSCTS policy.
*/
struct ieee80211_sta {
u32 supp_rates[NUM_NL80211_BANDS];
@@ -1976,6 +1999,13 @@ struct ieee80211_sta {
struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1];
+ int noack[IEEE80211_TID_MAX];
+ int retry_short[IEEE80211_TID_MAX];
+ int retry_long[IEEE80211_TID_MAX];
+ int ampdu[IEEE80211_TID_MAX];
+ u8 rate_ctrl[IEEE80211_TID_MAX];
+ u8 rtscts[IEEE80211_TID_MAX];
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
@@ -3707,6 +3737,10 @@ enum ieee80211_reconfig_type {
*
* @start_pmsr: start peer measurement (e.g. FTM) (this call can sleep)
* @abort_pmsr: abort peer measurement (this call can sleep)
+ * @set_tid_config: TID specific configurations will be applied for a particular
+ * station when @sta is non-NULL. When @sta is NULL, then the configuration
+ * will be for all the connected clients in the vif.
+ * This callback may sleep.
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
@@ -4004,6 +4038,10 @@ struct ieee80211_ops {
struct cfg80211_pmsr_request *request);
void (*abort_pmsr)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct cfg80211_pmsr_request *request);
+ int (*set_tid_config)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_tid_config *tid_conf);
};
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 09dd1c2..7d9c44d 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3893,6 +3893,33 @@ static int ieee80211_get_txq_stats(struct wiphy *wiphy,
return drv_abort_pmsr(local, sdata, request);
}
+static int ieee80211_set_tid_config(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct sta_info *sta;
+ int ret;
+
+ if (!sdata->local->ops->set_tid_config)
+ return -EOPNOTSUPP;
+
+ if (!tid_conf->peer)
+ return drv_set_tid_config(sdata->local, sdata, NULL, tid_conf);
+
+ mutex_lock(&sdata->local->sta_mtx);
+
+ sta = sta_info_get_bss(sdata, tid_conf->peer);
+ if (!sta) {
+ mutex_unlock(&sdata->local->sta_mtx);
+ return -ENOENT;
+ }
+
+ ret = drv_set_tid_config(sdata->local, sdata, &sta->sta, tid_conf);
+ mutex_unlock(&sdata->local->sta_mtx);
+ return ret;
+}
+
const struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
@@ -3990,4 +4017,5 @@ static int ieee80211_get_txq_stats(struct wiphy *wiphy,
.get_ftm_responder_stats = ieee80211_get_ftm_responder_stats,
.start_pmsr = ieee80211_start_pmsr,
.abort_pmsr = ieee80211_abort_pmsr,
+ .set_tid_config = ieee80211_set_tid_config,
};
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 28d022a..d316b18 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -1348,4 +1348,19 @@ static inline void drv_del_nan_func(struct ieee80211_local *local,
trace_drv_return_void(local);
}
+static inline int drv_set_tid_config(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_sta *sta,
+ struct ieee80211_tid_config *tid_conf)
+{
+ int ret;
+
+ might_sleep();
+ ret = local->ops->set_tid_config(&local->hw, &sdata->vif, sta,
+ tid_conf);
+ trace_drv_return_int(local, ret);
+
+ return ret;
+}
+
#endif /* __MAC80211_DRIVER_OPS */
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 7/9] ath10k: Add wmi command support for station specific TID config
2019-03-11 6:48 ` Tamizh chelvam
@ 2019-03-11 6:48 ` Tamizh chelvam
-1 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
This patch adds WMI interface to configure station specific
TID configuration . Host needs to send station's MAC address
along with TID number and its configuration to target through
WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID.
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT flag is added to advertise
this support.
Testing:
* Tested HW: QCA9888
* Tested FW: 10.4-3.5.1-00052
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 32 ++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 52 +++++++++++++++++++++++++++++
3 files changed, 103 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 1491c25..796badf 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -216,6 +216,8 @@ struct wmi_ops {
struct sk_buff *(*gen_bb_timing)
(struct ath10k *ar,
const struct wmi_bb_timing_cfg_arg *arg);
+ struct sk_buff *(*gen_per_peer_per_tid_cfg)(struct ath10k *ar,
+ const struct wmi_per_peer_per_tid_cfg_arg *arg);
};
@@ -1616,4 +1618,21 @@ struct wmi_ops {
return ath10k_wmi_cmd_send(ar, skb,
ar->wmi.cmd->set_bb_timing_cmdid);
}
+
+static inline int
+ath10k_wmi_set_per_peer_per_tid_cfg(struct ath10k *ar,
+ const struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_per_peer_per_tid_cfg)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_per_peer_per_tid_cfg(ar, arg);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->per_peer_per_tid_config_cmdid);
+}
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 97e5b2e..44b66f2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -740,6 +740,7 @@
.tdls_peer_update_cmdid = WMI_10_4_TDLS_PEER_UPDATE_CMDID,
.tdls_set_offchan_mode_cmdid = WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
.radar_found_cmdid = WMI_10_4_RADAR_FOUND_CMDID,
+ .per_peer_per_tid_config_cmdid = WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
};
/* MAIN WMI VDEV param map */
@@ -8862,6 +8863,36 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
}
static struct sk_buff *
+ath10k_wmi_10_4_gen_per_peer_per_tid_cfg(struct ath10k *ar,
+ const struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+ struct wmi_peer_per_tid_cfg_cmd *cmd;
+ struct sk_buff *skb;
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ memset(skb->data, 0, sizeof(*cmd));
+
+ cmd = (struct wmi_peer_per_tid_cfg_cmd *)skb->data;
+ cmd->vdev_id = cpu_to_le32(arg->vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, arg->peer_macaddr.addr);
+ cmd->tid = cpu_to_le32(arg->tid);
+ cmd->ack_policy = cpu_to_le32(arg->ack_policy);
+ cmd->aggr_control = cpu_to_le32(arg->aggr_control);
+ cmd->rate_control = cpu_to_le32(arg->rate_ctrl);
+ cmd->retry_count = cpu_to_le32(arg->retry_count);
+ cmd->rcode_flags = cpu_to_le32(arg->rcode_flags);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d mac_addr %pM\n",
+ arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control, arg->rate_ctrl,
+ arg->rcode_flags, arg->retry_count, arg->peer_macaddr.addr);
+ return skb;
+}
+
+static struct sk_buff *
ath10k_wmi_op_gen_echo(struct ath10k *ar, u32 value)
{
struct wmi_echo_cmd *cmd;
@@ -9270,6 +9301,7 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
.gen_pdev_get_tpc_table_cmdid =
ath10k_wmi_10_4_op_gen_pdev_get_tpc_table_cmdid,
.gen_radar_found = ath10k_wmi_10_4_gen_radar_found,
+ .gen_per_peer_per_tid_cfg = ath10k_wmi_10_4_gen_per_peer_per_tid_cfg,
/* shared with 10.2 */
.pull_echo_ev = ath10k_wmi_op_pull_echo_ev,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index d9b646f..187c13e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -200,6 +200,7 @@ enum wmi_service {
WMI_SERVICE_RTT_RESPONDER_ROLE,
WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
WMI_SERVICE_REPORT_AIRTIME,
+ WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
/* Remember to add the new value to wmi_service_name()! */
@@ -491,6 +492,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
+ SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
case WMI_SERVICE_MAX:
return NULL;
@@ -818,6 +820,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
WMI_SERVICE_REPORT_AIRTIME, len);
+ SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
}
#undef SVCMAP
@@ -1019,6 +1023,7 @@ struct wmi_cmd_map {
u32 tdls_set_offchan_mode_cmdid;
u32 radar_found_cmdid;
u32 set_bb_timing_cmdid;
+ u32 per_peer_per_tid_config_cmdid;
};
/*
@@ -1860,6 +1865,8 @@ enum wmi_10_4_cmd_id {
WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
WMI_10_4_RADAR_FOUND_CMDID,
+ WMI_10_4_PEER_CFR_CAPTURE_CMDID,
+ WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
};
@@ -7145,6 +7152,51 @@ struct wmi_tdls_peer_event {
__le32 vdev_id;
} __packed;
+enum wmi_tid_aggr_control_conf {
+ WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
+ WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
+ WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
+};
+
+enum wmi_noack_tid_conf {
+ WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
+ WMI_PEER_TID_CONFIG_ACK,
+ WMI_PEER_TID_CONFIG_NOACK,
+};
+
+enum wmi_tid_rate_ctrl_conf {
+ WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
+ WMI_TID_CONFIG_RATE_CONTROL_AUTO,
+ WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
+ WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+};
+
+struct wmi_per_peer_per_tid_cfg_arg {
+ u32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ u32 tid;
+ enum wmi_noack_tid_conf ack_policy;
+ enum wmi_tid_aggr_control_conf aggr_control;
+ u8 rate_ctrl;
+ u32 retry_count;
+ u32 rcode_flags;
+};
+
+struct wmi_peer_per_tid_cfg_cmd {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 tid;
+
+ /* see enum wmi_noack_tid_conf */
+ __le32 ack_policy;
+ /* see enum wmi_tid_aggr_control_conf */
+ __le32 aggr_control;
+ /* see enum wmi_tid_rate_ctrl_conf */
+ __le32 rate_control;
+ __le32 rcode_flags;
+ __le32 retry_count;
+} __packed;
+
enum wmi_txbf_conf {
WMI_TXBF_CONF_UNSUPPORTED,
WMI_TXBF_CONF_BEFORE_ASSOC,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 7/9] ath10k: Add wmi command support for station specific TID config
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
This patch adds WMI interface to configure station specific
TID configuration . Host needs to send station's MAC address
along with TID number and its configuration to target through
WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID.
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT flag is added to advertise
this support.
Testing:
* Tested HW: QCA9888
* Tested FW: 10.4-3.5.1-00052
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 32 ++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 52 +++++++++++++++++++++++++++++
3 files changed, 103 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 1491c25..796badf 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -216,6 +216,8 @@ struct wmi_ops {
struct sk_buff *(*gen_bb_timing)
(struct ath10k *ar,
const struct wmi_bb_timing_cfg_arg *arg);
+ struct sk_buff *(*gen_per_peer_per_tid_cfg)(struct ath10k *ar,
+ const struct wmi_per_peer_per_tid_cfg_arg *arg);
};
@@ -1616,4 +1618,21 @@ struct wmi_ops {
return ath10k_wmi_cmd_send(ar, skb,
ar->wmi.cmd->set_bb_timing_cmdid);
}
+
+static inline int
+ath10k_wmi_set_per_peer_per_tid_cfg(struct ath10k *ar,
+ const struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_per_peer_per_tid_cfg)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_per_peer_per_tid_cfg(ar, arg);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->per_peer_per_tid_config_cmdid);
+}
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 97e5b2e..44b66f2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -740,6 +740,7 @@
.tdls_peer_update_cmdid = WMI_10_4_TDLS_PEER_UPDATE_CMDID,
.tdls_set_offchan_mode_cmdid = WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
.radar_found_cmdid = WMI_10_4_RADAR_FOUND_CMDID,
+ .per_peer_per_tid_config_cmdid = WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
};
/* MAIN WMI VDEV param map */
@@ -8862,6 +8863,36 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
}
static struct sk_buff *
+ath10k_wmi_10_4_gen_per_peer_per_tid_cfg(struct ath10k *ar,
+ const struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+ struct wmi_peer_per_tid_cfg_cmd *cmd;
+ struct sk_buff *skb;
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ memset(skb->data, 0, sizeof(*cmd));
+
+ cmd = (struct wmi_peer_per_tid_cfg_cmd *)skb->data;
+ cmd->vdev_id = cpu_to_le32(arg->vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, arg->peer_macaddr.addr);
+ cmd->tid = cpu_to_le32(arg->tid);
+ cmd->ack_policy = cpu_to_le32(arg->ack_policy);
+ cmd->aggr_control = cpu_to_le32(arg->aggr_control);
+ cmd->rate_control = cpu_to_le32(arg->rate_ctrl);
+ cmd->retry_count = cpu_to_le32(arg->retry_count);
+ cmd->rcode_flags = cpu_to_le32(arg->rcode_flags);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d mac_addr %pM\n",
+ arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control, arg->rate_ctrl,
+ arg->rcode_flags, arg->retry_count, arg->peer_macaddr.addr);
+ return skb;
+}
+
+static struct sk_buff *
ath10k_wmi_op_gen_echo(struct ath10k *ar, u32 value)
{
struct wmi_echo_cmd *cmd;
@@ -9270,6 +9301,7 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
.gen_pdev_get_tpc_table_cmdid =
ath10k_wmi_10_4_op_gen_pdev_get_tpc_table_cmdid,
.gen_radar_found = ath10k_wmi_10_4_gen_radar_found,
+ .gen_per_peer_per_tid_cfg = ath10k_wmi_10_4_gen_per_peer_per_tid_cfg,
/* shared with 10.2 */
.pull_echo_ev = ath10k_wmi_op_pull_echo_ev,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index d9b646f..187c13e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -200,6 +200,7 @@ enum wmi_service {
WMI_SERVICE_RTT_RESPONDER_ROLE,
WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
WMI_SERVICE_REPORT_AIRTIME,
+ WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
/* Remember to add the new value to wmi_service_name()! */
@@ -491,6 +492,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
+ SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
case WMI_SERVICE_MAX:
return NULL;
@@ -818,6 +820,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
WMI_SERVICE_REPORT_AIRTIME, len);
+ SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
}
#undef SVCMAP
@@ -1019,6 +1023,7 @@ struct wmi_cmd_map {
u32 tdls_set_offchan_mode_cmdid;
u32 radar_found_cmdid;
u32 set_bb_timing_cmdid;
+ u32 per_peer_per_tid_config_cmdid;
};
/*
@@ -1860,6 +1865,8 @@ enum wmi_10_4_cmd_id {
WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
WMI_10_4_RADAR_FOUND_CMDID,
+ WMI_10_4_PEER_CFR_CAPTURE_CMDID,
+ WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
};
@@ -7145,6 +7152,51 @@ struct wmi_tdls_peer_event {
__le32 vdev_id;
} __packed;
+enum wmi_tid_aggr_control_conf {
+ WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
+ WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
+ WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
+};
+
+enum wmi_noack_tid_conf {
+ WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
+ WMI_PEER_TID_CONFIG_ACK,
+ WMI_PEER_TID_CONFIG_NOACK,
+};
+
+enum wmi_tid_rate_ctrl_conf {
+ WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
+ WMI_TID_CONFIG_RATE_CONTROL_AUTO,
+ WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
+ WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+};
+
+struct wmi_per_peer_per_tid_cfg_arg {
+ u32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ u32 tid;
+ enum wmi_noack_tid_conf ack_policy;
+ enum wmi_tid_aggr_control_conf aggr_control;
+ u8 rate_ctrl;
+ u32 retry_count;
+ u32 rcode_flags;
+};
+
+struct wmi_peer_per_tid_cfg_cmd {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 tid;
+
+ /* see enum wmi_noack_tid_conf */
+ __le32 ack_policy;
+ /* see enum wmi_tid_aggr_control_conf */
+ __le32 aggr_control;
+ /* see enum wmi_tid_rate_ctrl_conf */
+ __le32 rate_control;
+ __le32 rcode_flags;
+ __le32 retry_count;
+} __packed;
+
enum wmi_txbf_conf {
WMI_TXBF_CONF_UNSUPPORTED,
WMI_TXBF_CONF_BEFORE_ASSOC,
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 8/9] ath10k: Add new api to support TID specific configuration
2019-03-11 6:48 ` Tamizh chelvam
@ 2019-03-11 6:48 ` Tamizh chelvam
-1 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
This patch add ops for set_tid_config to support TID
specific configuration. STA information along with the
TID config change mask to notify driver that which configuration
needs to be applied for this current command.
If the STA info not available in the command then the
configuration will be applied for all connected stations
in the vif. TID specific noack configuration requires
aggregation disabled and rate for the data TID packets
should be basic rates. So, if the TID already configured
with noack policy then driver will ignore the aggregation
or TX rate related configuration for the same data TID.
In TX rate configuration should be applied with highest
preamble configuration(HT rates should not be applied
for the station which supports vht rates).
Vif specific TID configuration will be applied for all
the connected stations except for the station which
already applied with the same configuration for the TID
through station specific command. Newly connecting stations
will be applied with vif TID configuration which will be stored
in ieee80211_vif.
Testing:
* Tested HW: QCA9888
* Tested FW: 10.4-3.5.1-00052
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/core.h | 6 +
drivers/net/wireless/ath/ath10k/mac.c | 631 ++++++++++++++++++++++++++++----
2 files changed, 557 insertions(+), 80 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 27ec555..87234d2 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -82,6 +82,8 @@
/* Default Airtime weight multipler (Tuned for multiclient performance) */
#define ATH10K_AIRTIME_WEIGHT_MULTIPLIER 4
+#define ATH10K_MAX_RETRY_COUNT 30
+
struct ath10k;
static inline const char *ath10k_bus_str(enum ath10k_bus bus)
@@ -504,6 +506,7 @@ struct ath10k_sta {
#endif
/* Protected with ar->data_lock */
u32 peer_ps_state;
+ struct work_struct tid_config_wk;
};
#define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5 * HZ)
@@ -571,6 +574,9 @@ struct ath10k_vif {
struct work_struct ap_csa_work;
struct delayed_work connection_loss_work;
struct cfg80211_bitrate_mask bitrate_mask;
+ u32 tid_conf_changed[IEEE80211_TID_MAX];
+
+ struct ieee80211_tid_config *tid_config;
};
struct ath10k_vif_iter {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b73c23d..e5ae054 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2930,6 +2930,59 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
cancel_delayed_work_sync(&arvif->connection_loss_work);
}
+static int ath10k_new_peer_tid_config(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct ath10k_vif *arvif)
+{
+ struct wmi_per_peer_per_tid_cfg_arg arg = {};
+ struct ieee80211_vif *vif = arvif->vif;
+ bool config_apply;
+ int ret, i;
+
+ for (i = 0; i < IEEE80211_TID_MAX; i++) {
+ config_apply = false;
+ if (vif->retry_long[i] || vif->ampdu[i] ||
+ vif->rate_code[i]) {
+ config_apply = true;
+ arg.tid = i;
+ arg.vdev_id = arvif->vdev_id;
+ arg.retry_count = vif->retry_long[i];
+ arg.aggr_control = vif->ampdu[i];
+ arg.rate_ctrl = vif->rate_ctrl[i];
+ arg.rcode_flags = vif->rate_code[i];
+ }
+
+ if (vif->noack[i]) {
+ arg.ack_policy = vif->noack[i];
+ arg.rate_ctrl =
+ WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE;
+ arg.aggr_control = WMI_TID_CONFIG_AGGR_CONTROL_DISABLE;
+ config_apply = true;
+ }
+
+ /* Assign default value(-1) to newly connected station.
+ * This is to identify station specific tid configuration not
+ * configured for the station.
+ */
+ sta->retry_long[i] = -1;
+ sta->noack[i] = -1;
+ sta->ampdu[i] = -1;
+
+ if (!config_apply)
+ continue;
+
+ ether_addr_copy(arg.peer_macaddr.addr, sta->addr);
+ ret = ath10k_wmi_set_per_peer_per_tid_cfg(ar, &arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to set per tid retry/aggr config for sta %pM: %d\n",
+ sta->addr, ret);
+ return ret;
+ }
+ memset(&arg, 0, sizeof(arg));
+ }
+ return 0;
+}
+
static int ath10k_station_assoc(struct ath10k *ar,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
@@ -2995,7 +3048,10 @@ static int ath10k_station_assoc(struct ath10k *ar,
}
}
- return ret;
+ if (!test_bit(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, ar->wmi.svc_map))
+ return ret;
+
+ return ath10k_new_peer_tid_config(ar, sta, arvif);
}
static int ath10k_station_disassoc(struct ath10k *ar,
@@ -6350,6 +6406,338 @@ static void ath10k_mac_dec_num_stations(struct ath10k_vif *arvif,
ar->num_stations--;
}
+struct ath10k_mac_iter_tid_conf_data {
+ struct ieee80211_vif *curr_vif;
+ struct ath10k *ar;
+};
+
+static bool
+ath10k_mac_bitrate_mask_has_single_rate(struct ath10k *ar,
+ enum nl80211_band band,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ int num_rates = 0;
+ int i;
+
+ num_rates += hweight32(mask->control[band].legacy);
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++)
+ num_rates += hweight8(mask->control[band].ht_mcs[i]);
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++)
+ num_rates += hweight16(mask->control[band].vht_mcs[i]);
+
+ return num_rates == 1;
+}
+
+static int
+ath10k_mac_bitrate_mask_get_single_rate(struct ath10k *ar,
+ enum nl80211_band band,
+ const struct cfg80211_bitrate_mask *mask,
+ u8 *rate, u8 *nss)
+{
+ int rate_idx;
+ int i;
+ u16 bitrate;
+ u8 preamble;
+ u8 hw_rate;
+
+ if (hweight32(mask->control[band].legacy) == 1) {
+ rate_idx = ffs(mask->control[band].legacy) - 1;
+
+ if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
+ rate_idx += ATH10K_MAC_FIRST_OFDM_RATE_IDX;
+
+ hw_rate = ath10k_wmi_legacy_rates[rate_idx].hw_value;
+ bitrate = ath10k_wmi_legacy_rates[rate_idx].bitrate;
+
+ if (ath10k_mac_bitrate_is_cck(bitrate))
+ preamble = WMI_RATE_PREAMBLE_CCK;
+ else
+ preamble = WMI_RATE_PREAMBLE_OFDM;
+
+ *nss = 1;
+ *rate = preamble << 6 |
+ (*nss - 1) << 4 |
+ hw_rate << 0;
+
+ return 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) {
+ if (hweight8(mask->control[band].ht_mcs[i]) == 1) {
+ *nss = i + 1;
+ *rate = WMI_RATE_PREAMBLE_HT << 6 |
+ (*nss - 1) << 4 |
+ (ffs(mask->control[band].ht_mcs[i]) - 1);
+
+ return 0;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) {
+ if (hweight16(mask->control[band].vht_mcs[i]) == 1) {
+ *nss = i + 1;
+ *rate = WMI_RATE_PREAMBLE_VHT << 6 |
+ (*nss - 1) << 4 |
+ (ffs(mask->control[band].vht_mcs[i]) - 1);
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ u32 rate_ctrl_flag, u8 nss)
+{
+ if (nss > sta->rx_nss) {
+ ath10k_warn(ar, "Invalid nss field, configured %u limit %u\n",
+ nss, sta->rx_nss);
+ return -EINVAL;
+ }
+
+ if (ATH10K_HW_PREAMBLE(rate_ctrl_flag) == WMI_RATE_PREAMBLE_VHT) {
+ if (!sta->vht_cap.vht_supported) {
+ ath10k_warn(ar, "Invalid VHT rate for sta %pM\n",
+ sta->addr);
+ return -EINVAL;
+ }
+ } else if (ATH10K_HW_PREAMBLE(rate_ctrl_flag) == WMI_RATE_PREAMBLE_HT) {
+ if (!sta->ht_cap.ht_supported || sta->vht_cap.vht_supported) {
+ ath10k_warn(ar, "Invalid HT rate for sta %pM\n",
+ sta->addr);
+ return -EINVAL;
+ }
+ } else {
+ if (sta->ht_cap.ht_supported || sta->vht_cap.vht_supported)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+ath10k_mac_tid_bitrate_config(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ u32 *rate_ctrl_flag, u8 *rate_ctrl,
+ enum nl80211_tx_rate_setting txrate_type,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ struct cfg80211_chan_def def;
+ enum nl80211_band band;
+ u8 nss, rate;
+ int ret;
+
+ if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
+ return -EINVAL;
+
+ if (txrate_type == NL80211_TX_RATE_AUTOMATIC) {
+ *rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_AUTO;
+ *rate_ctrl_flag = 0;
+ return 0;
+ }
+
+ band = def.chan->band;
+
+ if (!ath10k_mac_bitrate_mask_has_single_rate(ar, band, mask))
+ return -EINVAL;
+
+ ret = ath10k_mac_bitrate_mask_get_single_rate(ar, band, mask,
+ &rate, &nss);
+ if (ret) {
+ ath10k_warn(ar, "failed to get single rate: %d\n",
+ ret);
+ return ret;
+ }
+ *rate_ctrl_flag = rate;
+
+ if (sta && ath10k_mac_validate_rate_mask(ar, sta, *rate_ctrl_flag, nss))
+ return -EINVAL;
+
+ if (txrate_type == NL80211_TX_RATE_FIXED)
+ *rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE;
+ else
+ return -EOPNOTSUPP;
+ return 0;
+}
+
+static void
+ath10k_mac_parse_tid_config(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct ieee80211_vif *vif,
+ struct ieee80211_tid_cfg *tid_conf,
+ struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+ u8 changed = tid_conf->tid_conf_mask;
+ int ret;
+
+ arg->tid = tid_conf->tid;
+
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ if (tid_conf->noack == NL80211_TID_CONFIG_ENABLE) {
+ arg->ack_policy = WMI_PEER_TID_CONFIG_NOACK;
+ arg->rate_ctrl =
+ WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE;
+ arg->aggr_control = WMI_TID_CONFIG_AGGR_CONTROL_DISABLE;
+ } else {
+ arg->ack_policy = WMI_PEER_TID_CONFIG_ACK;
+ arg->rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_AUTO;
+ arg->aggr_control = WMI_TID_CONFIG_AGGR_CONTROL_ENABLE;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (tid_conf->retry_long == -1) {
+ if (vif->retry_long[arg->tid])
+ arg->retry_count = vif->retry_long[arg->tid];
+ else
+ arg->retry_count = ATH10K_MAX_RETRY_COUNT;
+ } else {
+ arg->retry_count = tid_conf->retry_long;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (tid_conf->ampdu) {
+ arg->aggr_control = tid_conf->ampdu;
+ } else {
+ if (vif->ampdu[arg->tid])
+ arg->aggr_control = vif->ampdu[arg->tid];
+ else
+ arg->aggr_control =
+ WMI_TID_CONFIG_AGGR_CONTROL_DISABLE;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ ret = ath10k_mac_tid_bitrate_config(ar, vif, sta,
+ &arg->rcode_flags,
+ &arg->rate_ctrl,
+ tid_conf->txrate_type,
+ tid_conf->mask);
+ if (ret) {
+ ath10k_warn(ar, "failed to configure bitrate mask %d\n",
+ ret);
+ arg->rcode_flags = 0;
+ arg->rate_ctrl = 0;
+ }
+ }
+}
+
+static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
+{
+ struct wmi_per_peer_per_tid_cfg_arg arg = {};
+ struct ieee80211_vif *vif;
+ struct ieee80211_sta *sta;
+ struct ath10k_sta *arsta;
+ struct ath10k_vif *arvif;
+ struct ath10k *ar;
+ bool config_apply;
+ int ret, i;
+ u8 changed;
+
+ arsta = container_of(wk, struct ath10k_sta, tid_config_wk);
+ sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv);
+ arvif = arsta->arvif;
+ vif = arvif->vif;
+ ar = arvif->ar;
+
+ mutex_lock(&ar->conf_mutex);
+
+ ether_addr_copy(arg.peer_macaddr.addr, sta->addr);
+ for (i = 0; i < IEEE80211_TID_MAX; i++) {
+ config_apply = false;
+ changed = arvif->tid_conf_changed[i];
+
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ if (sta->noack[i] != -1) {
+ arg.ack_policy = 0;
+ } else {
+ config_apply = true;
+ arg.ack_policy = vif->noack[i];
+ arg.aggr_control = vif->ampdu[i];
+ arg.rate_ctrl = vif->rate_ctrl[i];
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (sta->retry_long[i] != -1 ||
+ sta->noack[i] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[i] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.retry_count = 0;
+ } else {
+ arg.retry_count = vif->retry_long[i];
+ config_apply = true;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (sta->ampdu[i] != -1 ||
+ sta->noack[i] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[i] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.aggr_control = 0;
+ } else {
+ arg.aggr_control = vif->ampdu[i];
+ config_apply = true;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ if (ath10k_mac_validate_rate_mask(ar, sta, vif->rate_code[i],
+ ATH10K_HW_NSS(vif->rate_code[i]))) {
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+
+ if (sta->rate_ctrl[i] >
+ WMI_TID_CONFIG_RATE_CONTROL_AUTO ||
+ sta->noack[i] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[i] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ } else {
+ arg.rate_ctrl = vif->rate_ctrl[i];
+ arg.rcode_flags = vif->rate_code[i];
+ config_apply = true;
+ }
+ }
+
+ arg.tid = i;
+
+ if (config_apply) {
+ ret = ath10k_wmi_set_per_peer_per_tid_cfg(ar, &arg);
+ if (ret)
+ ath10k_warn(ar, "failed to set per tid config for sta %pM: %d\n",
+ sta->addr, ret);
+ }
+
+ arg.ack_policy = 0;
+ arg.retry_count = 0;
+ arg.aggr_control = 0;
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static void ath10k_mac_vif_stations_tid_conf(void *data,
+ struct ieee80211_sta *sta)
+{
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k_mac_iter_tid_conf_data *iter_data = data;
+ struct ieee80211_vif *sta_vif = arsta->arvif->vif;
+
+ if (sta_vif != iter_data->curr_vif || !sta->wme)
+ return;
+
+ ieee80211_queue_work(iter_data->ar->hw, &arsta->tid_config_wk);
+}
+
static int ath10k_sta_state(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
@@ -6369,6 +6757,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
arsta->arvif = arvif;
arsta->peer_ps_state = WMI_PEER_PS_STATE_DISABLED;
INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk);
+ INIT_WORK(&arsta->tid_config_wk, ath10k_sta_tid_cfg_wk);
for (i = 0; i < ARRAY_SIZE(sta->txq); i++)
ath10k_mac_txq_init(sta->txq[i]);
@@ -6376,8 +6765,10 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/* cancel must be done outside the mutex to avoid deadlock */
if ((old_state == IEEE80211_STA_NONE &&
- new_state == IEEE80211_STA_NOTEXIST))
+ new_state == IEEE80211_STA_NOTEXIST)) {
cancel_work_sync(&arsta->update_wk);
+ cancel_work_sync(&arsta->tid_config_wk);
+ }
mutex_lock(&ar->conf_mutex);
@@ -7097,25 +7488,6 @@ static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
}
static bool
-ath10k_mac_bitrate_mask_has_single_rate(struct ath10k *ar,
- enum nl80211_band band,
- const struct cfg80211_bitrate_mask *mask)
-{
- int num_rates = 0;
- int i;
-
- num_rates += hweight32(mask->control[band].legacy);
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++)
- num_rates += hweight8(mask->control[band].ht_mcs[i]);
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++)
- num_rates += hweight16(mask->control[band].vht_mcs[i]);
-
- return num_rates == 1;
-}
-
-static bool
ath10k_mac_bitrate_mask_get_single_nss(struct ath10k *ar,
enum nl80211_band band,
const struct cfg80211_bitrate_mask *mask,
@@ -7164,65 +7536,6 @@ static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
return true;
}
-static int
-ath10k_mac_bitrate_mask_get_single_rate(struct ath10k *ar,
- enum nl80211_band band,
- const struct cfg80211_bitrate_mask *mask,
- u8 *rate, u8 *nss)
-{
- int rate_idx;
- int i;
- u16 bitrate;
- u8 preamble;
- u8 hw_rate;
-
- if (hweight32(mask->control[band].legacy) == 1) {
- rate_idx = ffs(mask->control[band].legacy) - 1;
-
- if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
- rate_idx += ATH10K_MAC_FIRST_OFDM_RATE_IDX;
-
- hw_rate = ath10k_wmi_legacy_rates[rate_idx].hw_value;
- bitrate = ath10k_wmi_legacy_rates[rate_idx].bitrate;
-
- if (ath10k_mac_bitrate_is_cck(bitrate))
- preamble = WMI_RATE_PREAMBLE_CCK;
- else
- preamble = WMI_RATE_PREAMBLE_OFDM;
-
- *nss = 1;
- *rate = preamble << 6 |
- (*nss - 1) << 4 |
- hw_rate << 0;
-
- return 0;
- }
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) {
- if (hweight8(mask->control[band].ht_mcs[i]) == 1) {
- *nss = i + 1;
- *rate = WMI_RATE_PREAMBLE_HT << 6 |
- (*nss - 1) << 4 |
- (ffs(mask->control[band].ht_mcs[i]) - 1);
-
- return 0;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) {
- if (hweight16(mask->control[band].vht_mcs[i]) == 1) {
- *nss = i + 1;
- *rate = WMI_RATE_PREAMBLE_VHT << 6 |
- (*nss - 1) << 4 |
- (ffs(mask->control[band].vht_mcs[i]) - 1);
-
- return 0;
- }
- }
-
- return -EINVAL;
-}
-
static int ath10k_mac_set_fixed_rate_params(struct ath10k_vif *arvif,
u8 rate, u8 nss, u8 sgi, u8 ldpc)
{
@@ -7991,6 +8304,140 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
}
+static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_tid_config *tid_config)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = (void *)vif->drv_priv;
+ struct ath10k_mac_iter_tid_conf_data data = {};
+ struct wmi_per_peer_per_tid_cfg_arg arg = {};
+ int ret, i;
+ u8 changed;
+
+ mutex_lock(&ar->conf_mutex);
+ arg.vdev_id = arvif->vdev_id;
+
+ memset(arvif->tid_conf_changed, 0, sizeof(arvif->tid_conf_changed));
+
+ for (i = 0; i < tid_config->n_tid_conf; i++) {
+ if (tid_config->tid_conf[i].tid >= IEEE80211_TID_MAX)
+ continue;
+
+ ath10k_mac_parse_tid_config(ar, sta, vif,
+ &tid_config->tid_conf[i],
+ &arg);
+ changed = tid_config->tid_conf[i].tid_conf_mask;
+ if (sta) {
+ if (!sta->wme) {
+ ret = -ENOTSUPP;
+ goto exit;
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (sta->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK)
+ arg.retry_count = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (sta->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK)
+ arg.aggr_control = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ if (sta->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+ }
+
+ ether_addr_copy(arg.peer_macaddr.addr, sta->addr);
+ ret = ath10k_wmi_set_per_peer_per_tid_cfg(ar, &arg);
+ if (ret)
+ goto exit;
+
+ /* Store the configured parameters in success case */
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ if (tid_config->tid_conf[i].noack ==
+ NL80211_TID_CONFIG_DEFAULT) {
+ sta->noack[arg.tid] = -1;
+ } else {
+ sta->noack[arg.tid] = arg.ack_policy;
+ }
+
+ arg.ack_policy = 0;
+ arg.aggr_control = 0;
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (tid_config->tid_conf[i].retry_long == -1) {
+ sta->retry_long[arg.tid] = -1;
+ } else {
+ sta->retry_long[arg.tid] = arg.retry_count;
+ }
+
+ arg.retry_count = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (tid_config->tid_conf[i].ampdu ==
+ NL80211_TID_CONFIG_DEFAULT) {
+ sta->ampdu[arg.tid] = -1;
+ } else {
+ sta->ampdu[arg.tid] = arg.aggr_control;
+ }
+
+ arg.aggr_control = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ sta->rate_ctrl[arg.tid] = arg.rate_ctrl;
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+ } else {
+ arvif->tid_conf_changed[arg.tid] |= changed;
+
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ vif->noack[arg.tid] = arg.ack_policy;
+ vif->ampdu[arg.tid] = arg.aggr_control;
+ vif->rate_ctrl[arg.tid] = arg.rate_ctrl;
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY)
+ vif->retry_long[arg.tid] = arg.retry_count;
+
+ if (changed & IEEE80211_TID_CONF_AMPDU)
+ vif->ampdu[arg.tid] = arg.aggr_control;
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ vif->rate_ctrl[arg.tid] = arg.rate_ctrl;
+ vif->rate_code[arg.tid] = arg.rcode_flags;
+ }
+ }
+ }
+
+ if (sta)
+ goto exit;
+
+ ret = 0;
+ data.curr_vif = vif;
+ data.ar = ar;
+
+ ieee80211_iterate_stations_atomic(hw, ath10k_mac_vif_stations_tid_conf,
+ &data);
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
static const struct ieee80211_ops ath10k_ops = {
.tx = ath10k_mac_op_tx,
.wake_tx_queue = ath10k_mac_op_wake_tx_queue,
@@ -8033,6 +8480,7 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
.switch_vif_chanctx = ath10k_mac_op_switch_vif_chanctx,
.sta_pre_rcu_remove = ath10k_mac_op_sta_pre_rcu_remove,
.sta_statistics = ath10k_sta_statistics,
+ .set_tid_config = ath10k_mac_op_set_tid_config,
CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
@@ -8695,6 +9143,29 @@ int ath10k_mac_register(struct ath10k *ar)
wiphy_ext_feature_set(ar->hw->wiphy,
NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER);
+ if (test_bit(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, ar->wmi.svc_map)) {
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK);
+ ar->hw->wiphy->max_data_retry_count = ATH10K_MAX_RETRY_COUNT;
+ ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT;
+ } else {
+ ar->ops->set_tid_config = NULL;
+ ar->hw->wiphy->flags &= ~WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT;
+ }
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 8/9] ath10k: Add new api to support TID specific configuration
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
This patch add ops for set_tid_config to support TID
specific configuration. STA information along with the
TID config change mask to notify driver that which configuration
needs to be applied for this current command.
If the STA info not available in the command then the
configuration will be applied for all connected stations
in the vif. TID specific noack configuration requires
aggregation disabled and rate for the data TID packets
should be basic rates. So, if the TID already configured
with noack policy then driver will ignore the aggregation
or TX rate related configuration for the same data TID.
In TX rate configuration should be applied with highest
preamble configuration(HT rates should not be applied
for the station which supports vht rates).
Vif specific TID configuration will be applied for all
the connected stations except for the station which
already applied with the same configuration for the TID
through station specific command. Newly connecting stations
will be applied with vif TID configuration which will be stored
in ieee80211_vif.
Testing:
* Tested HW: QCA9888
* Tested FW: 10.4-3.5.1-00052
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/core.h | 6 +
drivers/net/wireless/ath/ath10k/mac.c | 631 ++++++++++++++++++++++++++++----
2 files changed, 557 insertions(+), 80 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 27ec555..87234d2 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -82,6 +82,8 @@
/* Default Airtime weight multipler (Tuned for multiclient performance) */
#define ATH10K_AIRTIME_WEIGHT_MULTIPLIER 4
+#define ATH10K_MAX_RETRY_COUNT 30
+
struct ath10k;
static inline const char *ath10k_bus_str(enum ath10k_bus bus)
@@ -504,6 +506,7 @@ struct ath10k_sta {
#endif
/* Protected with ar->data_lock */
u32 peer_ps_state;
+ struct work_struct tid_config_wk;
};
#define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5 * HZ)
@@ -571,6 +574,9 @@ struct ath10k_vif {
struct work_struct ap_csa_work;
struct delayed_work connection_loss_work;
struct cfg80211_bitrate_mask bitrate_mask;
+ u32 tid_conf_changed[IEEE80211_TID_MAX];
+
+ struct ieee80211_tid_config *tid_config;
};
struct ath10k_vif_iter {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b73c23d..e5ae054 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2930,6 +2930,59 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
cancel_delayed_work_sync(&arvif->connection_loss_work);
}
+static int ath10k_new_peer_tid_config(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct ath10k_vif *arvif)
+{
+ struct wmi_per_peer_per_tid_cfg_arg arg = {};
+ struct ieee80211_vif *vif = arvif->vif;
+ bool config_apply;
+ int ret, i;
+
+ for (i = 0; i < IEEE80211_TID_MAX; i++) {
+ config_apply = false;
+ if (vif->retry_long[i] || vif->ampdu[i] ||
+ vif->rate_code[i]) {
+ config_apply = true;
+ arg.tid = i;
+ arg.vdev_id = arvif->vdev_id;
+ arg.retry_count = vif->retry_long[i];
+ arg.aggr_control = vif->ampdu[i];
+ arg.rate_ctrl = vif->rate_ctrl[i];
+ arg.rcode_flags = vif->rate_code[i];
+ }
+
+ if (vif->noack[i]) {
+ arg.ack_policy = vif->noack[i];
+ arg.rate_ctrl =
+ WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE;
+ arg.aggr_control = WMI_TID_CONFIG_AGGR_CONTROL_DISABLE;
+ config_apply = true;
+ }
+
+ /* Assign default value(-1) to newly connected station.
+ * This is to identify station specific tid configuration not
+ * configured for the station.
+ */
+ sta->retry_long[i] = -1;
+ sta->noack[i] = -1;
+ sta->ampdu[i] = -1;
+
+ if (!config_apply)
+ continue;
+
+ ether_addr_copy(arg.peer_macaddr.addr, sta->addr);
+ ret = ath10k_wmi_set_per_peer_per_tid_cfg(ar, &arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to set per tid retry/aggr config for sta %pM: %d\n",
+ sta->addr, ret);
+ return ret;
+ }
+ memset(&arg, 0, sizeof(arg));
+ }
+ return 0;
+}
+
static int ath10k_station_assoc(struct ath10k *ar,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
@@ -2995,7 +3048,10 @@ static int ath10k_station_assoc(struct ath10k *ar,
}
}
- return ret;
+ if (!test_bit(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, ar->wmi.svc_map))
+ return ret;
+
+ return ath10k_new_peer_tid_config(ar, sta, arvif);
}
static int ath10k_station_disassoc(struct ath10k *ar,
@@ -6350,6 +6406,338 @@ static void ath10k_mac_dec_num_stations(struct ath10k_vif *arvif,
ar->num_stations--;
}
+struct ath10k_mac_iter_tid_conf_data {
+ struct ieee80211_vif *curr_vif;
+ struct ath10k *ar;
+};
+
+static bool
+ath10k_mac_bitrate_mask_has_single_rate(struct ath10k *ar,
+ enum nl80211_band band,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ int num_rates = 0;
+ int i;
+
+ num_rates += hweight32(mask->control[band].legacy);
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++)
+ num_rates += hweight8(mask->control[band].ht_mcs[i]);
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++)
+ num_rates += hweight16(mask->control[band].vht_mcs[i]);
+
+ return num_rates == 1;
+}
+
+static int
+ath10k_mac_bitrate_mask_get_single_rate(struct ath10k *ar,
+ enum nl80211_band band,
+ const struct cfg80211_bitrate_mask *mask,
+ u8 *rate, u8 *nss)
+{
+ int rate_idx;
+ int i;
+ u16 bitrate;
+ u8 preamble;
+ u8 hw_rate;
+
+ if (hweight32(mask->control[band].legacy) == 1) {
+ rate_idx = ffs(mask->control[band].legacy) - 1;
+
+ if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
+ rate_idx += ATH10K_MAC_FIRST_OFDM_RATE_IDX;
+
+ hw_rate = ath10k_wmi_legacy_rates[rate_idx].hw_value;
+ bitrate = ath10k_wmi_legacy_rates[rate_idx].bitrate;
+
+ if (ath10k_mac_bitrate_is_cck(bitrate))
+ preamble = WMI_RATE_PREAMBLE_CCK;
+ else
+ preamble = WMI_RATE_PREAMBLE_OFDM;
+
+ *nss = 1;
+ *rate = preamble << 6 |
+ (*nss - 1) << 4 |
+ hw_rate << 0;
+
+ return 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) {
+ if (hweight8(mask->control[band].ht_mcs[i]) == 1) {
+ *nss = i + 1;
+ *rate = WMI_RATE_PREAMBLE_HT << 6 |
+ (*nss - 1) << 4 |
+ (ffs(mask->control[band].ht_mcs[i]) - 1);
+
+ return 0;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) {
+ if (hweight16(mask->control[band].vht_mcs[i]) == 1) {
+ *nss = i + 1;
+ *rate = WMI_RATE_PREAMBLE_VHT << 6 |
+ (*nss - 1) << 4 |
+ (ffs(mask->control[band].vht_mcs[i]) - 1);
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ u32 rate_ctrl_flag, u8 nss)
+{
+ if (nss > sta->rx_nss) {
+ ath10k_warn(ar, "Invalid nss field, configured %u limit %u\n",
+ nss, sta->rx_nss);
+ return -EINVAL;
+ }
+
+ if (ATH10K_HW_PREAMBLE(rate_ctrl_flag) == WMI_RATE_PREAMBLE_VHT) {
+ if (!sta->vht_cap.vht_supported) {
+ ath10k_warn(ar, "Invalid VHT rate for sta %pM\n",
+ sta->addr);
+ return -EINVAL;
+ }
+ } else if (ATH10K_HW_PREAMBLE(rate_ctrl_flag) == WMI_RATE_PREAMBLE_HT) {
+ if (!sta->ht_cap.ht_supported || sta->vht_cap.vht_supported) {
+ ath10k_warn(ar, "Invalid HT rate for sta %pM\n",
+ sta->addr);
+ return -EINVAL;
+ }
+ } else {
+ if (sta->ht_cap.ht_supported || sta->vht_cap.vht_supported)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+ath10k_mac_tid_bitrate_config(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ u32 *rate_ctrl_flag, u8 *rate_ctrl,
+ enum nl80211_tx_rate_setting txrate_type,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ struct cfg80211_chan_def def;
+ enum nl80211_band band;
+ u8 nss, rate;
+ int ret;
+
+ if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
+ return -EINVAL;
+
+ if (txrate_type == NL80211_TX_RATE_AUTOMATIC) {
+ *rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_AUTO;
+ *rate_ctrl_flag = 0;
+ return 0;
+ }
+
+ band = def.chan->band;
+
+ if (!ath10k_mac_bitrate_mask_has_single_rate(ar, band, mask))
+ return -EINVAL;
+
+ ret = ath10k_mac_bitrate_mask_get_single_rate(ar, band, mask,
+ &rate, &nss);
+ if (ret) {
+ ath10k_warn(ar, "failed to get single rate: %d\n",
+ ret);
+ return ret;
+ }
+ *rate_ctrl_flag = rate;
+
+ if (sta && ath10k_mac_validate_rate_mask(ar, sta, *rate_ctrl_flag, nss))
+ return -EINVAL;
+
+ if (txrate_type == NL80211_TX_RATE_FIXED)
+ *rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE;
+ else
+ return -EOPNOTSUPP;
+ return 0;
+}
+
+static void
+ath10k_mac_parse_tid_config(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct ieee80211_vif *vif,
+ struct ieee80211_tid_cfg *tid_conf,
+ struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+ u8 changed = tid_conf->tid_conf_mask;
+ int ret;
+
+ arg->tid = tid_conf->tid;
+
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ if (tid_conf->noack == NL80211_TID_CONFIG_ENABLE) {
+ arg->ack_policy = WMI_PEER_TID_CONFIG_NOACK;
+ arg->rate_ctrl =
+ WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE;
+ arg->aggr_control = WMI_TID_CONFIG_AGGR_CONTROL_DISABLE;
+ } else {
+ arg->ack_policy = WMI_PEER_TID_CONFIG_ACK;
+ arg->rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_AUTO;
+ arg->aggr_control = WMI_TID_CONFIG_AGGR_CONTROL_ENABLE;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (tid_conf->retry_long == -1) {
+ if (vif->retry_long[arg->tid])
+ arg->retry_count = vif->retry_long[arg->tid];
+ else
+ arg->retry_count = ATH10K_MAX_RETRY_COUNT;
+ } else {
+ arg->retry_count = tid_conf->retry_long;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (tid_conf->ampdu) {
+ arg->aggr_control = tid_conf->ampdu;
+ } else {
+ if (vif->ampdu[arg->tid])
+ arg->aggr_control = vif->ampdu[arg->tid];
+ else
+ arg->aggr_control =
+ WMI_TID_CONFIG_AGGR_CONTROL_DISABLE;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ ret = ath10k_mac_tid_bitrate_config(ar, vif, sta,
+ &arg->rcode_flags,
+ &arg->rate_ctrl,
+ tid_conf->txrate_type,
+ tid_conf->mask);
+ if (ret) {
+ ath10k_warn(ar, "failed to configure bitrate mask %d\n",
+ ret);
+ arg->rcode_flags = 0;
+ arg->rate_ctrl = 0;
+ }
+ }
+}
+
+static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
+{
+ struct wmi_per_peer_per_tid_cfg_arg arg = {};
+ struct ieee80211_vif *vif;
+ struct ieee80211_sta *sta;
+ struct ath10k_sta *arsta;
+ struct ath10k_vif *arvif;
+ struct ath10k *ar;
+ bool config_apply;
+ int ret, i;
+ u8 changed;
+
+ arsta = container_of(wk, struct ath10k_sta, tid_config_wk);
+ sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv);
+ arvif = arsta->arvif;
+ vif = arvif->vif;
+ ar = arvif->ar;
+
+ mutex_lock(&ar->conf_mutex);
+
+ ether_addr_copy(arg.peer_macaddr.addr, sta->addr);
+ for (i = 0; i < IEEE80211_TID_MAX; i++) {
+ config_apply = false;
+ changed = arvif->tid_conf_changed[i];
+
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ if (sta->noack[i] != -1) {
+ arg.ack_policy = 0;
+ } else {
+ config_apply = true;
+ arg.ack_policy = vif->noack[i];
+ arg.aggr_control = vif->ampdu[i];
+ arg.rate_ctrl = vif->rate_ctrl[i];
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (sta->retry_long[i] != -1 ||
+ sta->noack[i] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[i] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.retry_count = 0;
+ } else {
+ arg.retry_count = vif->retry_long[i];
+ config_apply = true;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (sta->ampdu[i] != -1 ||
+ sta->noack[i] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[i] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.aggr_control = 0;
+ } else {
+ arg.aggr_control = vif->ampdu[i];
+ config_apply = true;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ if (ath10k_mac_validate_rate_mask(ar, sta, vif->rate_code[i],
+ ATH10K_HW_NSS(vif->rate_code[i]))) {
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+
+ if (sta->rate_ctrl[i] >
+ WMI_TID_CONFIG_RATE_CONTROL_AUTO ||
+ sta->noack[i] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[i] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ } else {
+ arg.rate_ctrl = vif->rate_ctrl[i];
+ arg.rcode_flags = vif->rate_code[i];
+ config_apply = true;
+ }
+ }
+
+ arg.tid = i;
+
+ if (config_apply) {
+ ret = ath10k_wmi_set_per_peer_per_tid_cfg(ar, &arg);
+ if (ret)
+ ath10k_warn(ar, "failed to set per tid config for sta %pM: %d\n",
+ sta->addr, ret);
+ }
+
+ arg.ack_policy = 0;
+ arg.retry_count = 0;
+ arg.aggr_control = 0;
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static void ath10k_mac_vif_stations_tid_conf(void *data,
+ struct ieee80211_sta *sta)
+{
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k_mac_iter_tid_conf_data *iter_data = data;
+ struct ieee80211_vif *sta_vif = arsta->arvif->vif;
+
+ if (sta_vif != iter_data->curr_vif || !sta->wme)
+ return;
+
+ ieee80211_queue_work(iter_data->ar->hw, &arsta->tid_config_wk);
+}
+
static int ath10k_sta_state(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
@@ -6369,6 +6757,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
arsta->arvif = arvif;
arsta->peer_ps_state = WMI_PEER_PS_STATE_DISABLED;
INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk);
+ INIT_WORK(&arsta->tid_config_wk, ath10k_sta_tid_cfg_wk);
for (i = 0; i < ARRAY_SIZE(sta->txq); i++)
ath10k_mac_txq_init(sta->txq[i]);
@@ -6376,8 +6765,10 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/* cancel must be done outside the mutex to avoid deadlock */
if ((old_state == IEEE80211_STA_NONE &&
- new_state == IEEE80211_STA_NOTEXIST))
+ new_state == IEEE80211_STA_NOTEXIST)) {
cancel_work_sync(&arsta->update_wk);
+ cancel_work_sync(&arsta->tid_config_wk);
+ }
mutex_lock(&ar->conf_mutex);
@@ -7097,25 +7488,6 @@ static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
}
static bool
-ath10k_mac_bitrate_mask_has_single_rate(struct ath10k *ar,
- enum nl80211_band band,
- const struct cfg80211_bitrate_mask *mask)
-{
- int num_rates = 0;
- int i;
-
- num_rates += hweight32(mask->control[band].legacy);
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++)
- num_rates += hweight8(mask->control[band].ht_mcs[i]);
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++)
- num_rates += hweight16(mask->control[band].vht_mcs[i]);
-
- return num_rates == 1;
-}
-
-static bool
ath10k_mac_bitrate_mask_get_single_nss(struct ath10k *ar,
enum nl80211_band band,
const struct cfg80211_bitrate_mask *mask,
@@ -7164,65 +7536,6 @@ static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
return true;
}
-static int
-ath10k_mac_bitrate_mask_get_single_rate(struct ath10k *ar,
- enum nl80211_band band,
- const struct cfg80211_bitrate_mask *mask,
- u8 *rate, u8 *nss)
-{
- int rate_idx;
- int i;
- u16 bitrate;
- u8 preamble;
- u8 hw_rate;
-
- if (hweight32(mask->control[band].legacy) == 1) {
- rate_idx = ffs(mask->control[band].legacy) - 1;
-
- if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
- rate_idx += ATH10K_MAC_FIRST_OFDM_RATE_IDX;
-
- hw_rate = ath10k_wmi_legacy_rates[rate_idx].hw_value;
- bitrate = ath10k_wmi_legacy_rates[rate_idx].bitrate;
-
- if (ath10k_mac_bitrate_is_cck(bitrate))
- preamble = WMI_RATE_PREAMBLE_CCK;
- else
- preamble = WMI_RATE_PREAMBLE_OFDM;
-
- *nss = 1;
- *rate = preamble << 6 |
- (*nss - 1) << 4 |
- hw_rate << 0;
-
- return 0;
- }
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) {
- if (hweight8(mask->control[band].ht_mcs[i]) == 1) {
- *nss = i + 1;
- *rate = WMI_RATE_PREAMBLE_HT << 6 |
- (*nss - 1) << 4 |
- (ffs(mask->control[band].ht_mcs[i]) - 1);
-
- return 0;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) {
- if (hweight16(mask->control[band].vht_mcs[i]) == 1) {
- *nss = i + 1;
- *rate = WMI_RATE_PREAMBLE_VHT << 6 |
- (*nss - 1) << 4 |
- (ffs(mask->control[band].vht_mcs[i]) - 1);
-
- return 0;
- }
- }
-
- return -EINVAL;
-}
-
static int ath10k_mac_set_fixed_rate_params(struct ath10k_vif *arvif,
u8 rate, u8 nss, u8 sgi, u8 ldpc)
{
@@ -7991,6 +8304,140 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
}
+static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_tid_config *tid_config)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = (void *)vif->drv_priv;
+ struct ath10k_mac_iter_tid_conf_data data = {};
+ struct wmi_per_peer_per_tid_cfg_arg arg = {};
+ int ret, i;
+ u8 changed;
+
+ mutex_lock(&ar->conf_mutex);
+ arg.vdev_id = arvif->vdev_id;
+
+ memset(arvif->tid_conf_changed, 0, sizeof(arvif->tid_conf_changed));
+
+ for (i = 0; i < tid_config->n_tid_conf; i++) {
+ if (tid_config->tid_conf[i].tid >= IEEE80211_TID_MAX)
+ continue;
+
+ ath10k_mac_parse_tid_config(ar, sta, vif,
+ &tid_config->tid_conf[i],
+ &arg);
+ changed = tid_config->tid_conf[i].tid_conf_mask;
+ if (sta) {
+ if (!sta->wme) {
+ ret = -ENOTSUPP;
+ goto exit;
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (sta->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK)
+ arg.retry_count = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (sta->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK)
+ arg.aggr_control = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ if (sta->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+ }
+
+ ether_addr_copy(arg.peer_macaddr.addr, sta->addr);
+ ret = ath10k_wmi_set_per_peer_per_tid_cfg(ar, &arg);
+ if (ret)
+ goto exit;
+
+ /* Store the configured parameters in success case */
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ if (tid_config->tid_conf[i].noack ==
+ NL80211_TID_CONFIG_DEFAULT) {
+ sta->noack[arg.tid] = -1;
+ } else {
+ sta->noack[arg.tid] = arg.ack_policy;
+ }
+
+ arg.ack_policy = 0;
+ arg.aggr_control = 0;
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (tid_config->tid_conf[i].retry_long == -1) {
+ sta->retry_long[arg.tid] = -1;
+ } else {
+ sta->retry_long[arg.tid] = arg.retry_count;
+ }
+
+ arg.retry_count = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (tid_config->tid_conf[i].ampdu ==
+ NL80211_TID_CONFIG_DEFAULT) {
+ sta->ampdu[arg.tid] = -1;
+ } else {
+ sta->ampdu[arg.tid] = arg.aggr_control;
+ }
+
+ arg.aggr_control = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ sta->rate_ctrl[arg.tid] = arg.rate_ctrl;
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+ } else {
+ arvif->tid_conf_changed[arg.tid] |= changed;
+
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ vif->noack[arg.tid] = arg.ack_policy;
+ vif->ampdu[arg.tid] = arg.aggr_control;
+ vif->rate_ctrl[arg.tid] = arg.rate_ctrl;
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY)
+ vif->retry_long[arg.tid] = arg.retry_count;
+
+ if (changed & IEEE80211_TID_CONF_AMPDU)
+ vif->ampdu[arg.tid] = arg.aggr_control;
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ vif->rate_ctrl[arg.tid] = arg.rate_ctrl;
+ vif->rate_code[arg.tid] = arg.rcode_flags;
+ }
+ }
+ }
+
+ if (sta)
+ goto exit;
+
+ ret = 0;
+ data.curr_vif = vif;
+ data.ar = ar;
+
+ ieee80211_iterate_stations_atomic(hw, ath10k_mac_vif_stations_tid_conf,
+ &data);
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
static const struct ieee80211_ops ath10k_ops = {
.tx = ath10k_mac_op_tx,
.wake_tx_queue = ath10k_mac_op_wake_tx_queue,
@@ -8033,6 +8480,7 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
.switch_vif_chanctx = ath10k_mac_op_switch_vif_chanctx,
.sta_pre_rcu_remove = ath10k_mac_op_sta_pre_rcu_remove,
.sta_statistics = ath10k_sta_statistics,
+ .set_tid_config = ath10k_mac_op_set_tid_config,
CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
@@ -8695,6 +9143,29 @@ int ath10k_mac_register(struct ath10k *ar)
wiphy_ext_feature_set(ar->hw->wiphy,
NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER);
+ if (test_bit(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, ar->wmi.svc_map)) {
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK);
+ ar->hw->wiphy->max_data_retry_count = ATH10K_MAX_RETRY_COUNT;
+ ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT;
+ } else {
+ ar->ops->set_tid_config = NULL;
+ ar->hw->wiphy->flags &= ~WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT;
+ }
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 9/9] ath10k: Add extended TID configuration support
2019-03-11 6:48 ` Tamizh chelvam
@ 2019-03-11 6:48 ` Tamizh chelvam
-1 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
This patch extend TID configuration support to configure
RTS_CTS control and TX rate limit. Tx rate limit is
similar to auto rate but it will be limited to the user
configured rate mask rather than the station's highest
supported rate mask. Here ext_tid_cfg_bitmap added
to notify the target which extended configuration
parameter has modified(here RTS_CTS).
WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT service flag
introduced to advertise this support.
Testing:
* Tested HW: QCA9984
* Tested FW: 10.4-3.9.0.2-00021
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/core.c | 4 +++
drivers/net/wireless/ath/ath10k/mac.c | 48 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 9 ++++--
drivers/net/wireless/ath/ath10k/wmi.h | 20 +++++++++++++
4 files changed, 78 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index ac2cf3f..248709d 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2623,6 +2623,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
if (test_bit(WMI_SERVICE_REPORT_AIRTIME, ar->wmi.svc_map))
val |= WMI_10_4_REPORT_AIRTIME;
+ if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ ar->wmi.svc_map))
+ val |= WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT;
+
status = ath10k_mac_ext_resource_config(ar, val);
if (status) {
ath10k_err(ar,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e5ae054..5d4611e 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2950,6 +2950,12 @@ static int ath10k_new_peer_tid_config(struct ath10k *ar,
arg.aggr_control = vif->ampdu[i];
arg.rate_ctrl = vif->rate_ctrl[i];
arg.rcode_flags = vif->rate_code[i];
+ if (vif->rtscts[i])
+ arg.ext_tid_cfg_bitmap =
+ WMI_EXT_TID_RTS_CTS_CONFIG;
+ else
+ arg.ext_tid_cfg_bitmap = 0;
+ arg.rtscts_ctrl = vif->rtscts[i];
}
if (vif->noack[i]) {
@@ -6560,6 +6566,10 @@ static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
if (txrate_type == NL80211_TX_RATE_FIXED)
*rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE;
+ else if (txrate_type == NL80211_TX_RATE_LIMITED &&
+ (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ ar->wmi.svc_map)))
+ *rate_ctrl = WMI_PEER_TID_CONFIG_RATE_UPPER_CAP;
else
return -EOPNOTSUPP;
return 0;
@@ -6626,6 +6636,14 @@ static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
arg->rate_ctrl = 0;
}
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ if (tid_conf->rtscts)
+ arg->rtscts_ctrl = tid_conf->rtscts - 1;
+ else
+ arg->rtscts_ctrl = WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE;
+ arg->ext_tid_cfg_bitmap = WMI_EXT_TID_RTS_CTS_CONFIG;
+ }
}
static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
@@ -6706,6 +6724,18 @@ static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
}
}
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ if (sta->rtscts[i]) {
+ arg.rtscts_ctrl = 0;
+ arg.ext_tid_cfg_bitmap = 0;
+ } else {
+ arg.rtscts_ctrl = vif->rtscts[i] - 1;
+ arg.ext_tid_cfg_bitmap =
+ WMI_EXT_TID_RTS_CTS_CONFIG;
+ config_apply = true;
+ }
+ }
+
arg.tid = i;
if (config_apply) {
@@ -8401,6 +8431,13 @@ static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
arg.rate_ctrl = 0;
arg.rcode_flags = 0;
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ sta->rtscts[arg.tid] =
+ tid_config->tid_conf[i].rtscts;
+ arg.rtscts_ctrl = 0;
+ arg.ext_tid_cfg_bitmap = 0;
+ }
} else {
arvif->tid_conf_changed[arg.tid] |= changed;
@@ -8420,6 +8457,10 @@ static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
vif->rate_ctrl[arg.tid] = arg.rate_ctrl;
vif->rate_code[arg.tid] = arg.rcode_flags;
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS)
+ vif->rtscts[arg.tid] =
+ tid_config->tid_conf[i].rtscts;
}
}
@@ -9166,6 +9207,13 @@ int ath10k_mac_register(struct ath10k *ar)
ar->ops->set_tid_config = NULL;
ar->hw->wiphy->flags &= ~WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT;
}
+
+ if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, ar->wmi.svc_map)) {
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL);
+ }
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 44b66f2..6ae3f8c 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -8884,11 +8884,14 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
cmd->rate_control = cpu_to_le32(arg->rate_ctrl);
cmd->retry_count = cpu_to_le32(arg->retry_count);
cmd->rcode_flags = cpu_to_le32(arg->rcode_flags);
+ cmd->ext_tid_cfg_bitmap = cpu_to_le32(arg->ext_tid_cfg_bitmap);
+ cmd->rtscts_ctrl = cpu_to_le32(arg->rtscts_ctrl);
ath10k_dbg(ar, ATH10K_DBG_WMI,
- "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d mac_addr %pM\n",
- arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control, arg->rate_ctrl,
- arg->rcode_flags, arg->retry_count, arg->peer_macaddr.addr);
+ "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d rtscts %d ext_tid_cfg_bitmap %d mac_addr %pM\n",
+ arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control,
+ arg->rate_ctrl, arg->rcode_flags, arg->retry_count, arg->rtscts_ctrl,
+ arg->ext_tid_cfg_bitmap, arg->peer_macaddr.addr);
return skb;
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 187c13e..21a328f 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -201,6 +201,7 @@ enum wmi_service {
WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
WMI_SERVICE_REPORT_AIRTIME,
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
/* Remember to add the new value to wmi_service_name()! */
@@ -493,6 +494,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
+ SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
case WMI_SERVICE_MAX:
return NULL;
@@ -822,6 +824,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_REPORT_AIRTIME, len);
SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, len);
}
#undef SVCMAP
@@ -7169,6 +7173,16 @@ enum wmi_tid_rate_ctrl_conf {
WMI_TID_CONFIG_RATE_CONTROL_AUTO,
WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+ WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
+};
+
+enum wmi_tid_rtscts_control_conf {
+ WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
+ WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
+};
+
+enum wmi_ext_tid_config_map {
+ WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
};
struct wmi_per_peer_per_tid_cfg_arg {
@@ -7180,6 +7194,8 @@ struct wmi_per_peer_per_tid_cfg_arg {
u8 rate_ctrl;
u32 retry_count;
u32 rcode_flags;
+ u32 ext_tid_cfg_bitmap;
+ u32 rtscts_ctrl;
};
struct wmi_peer_per_tid_cfg_cmd {
@@ -7195,6 +7211,10 @@ struct wmi_peer_per_tid_cfg_cmd {
__le32 rate_control;
__le32 rcode_flags;
__le32 retry_count;
+ /* See enum wmi_ext_tid_config_map */
+ __le32 ext_tid_cfg_bitmap;
+ /* see enum wmi_tid_rtscts_control_conf */
+ __le32 rtscts_ctrl;
} __packed;
enum wmi_txbf_conf {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 9/9] ath10k: Add extended TID configuration support
@ 2019-03-11 6:48 ` Tamizh chelvam
0 siblings, 0 replies; 20+ messages in thread
From: Tamizh chelvam @ 2019-03-11 6:48 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
This patch extend TID configuration support to configure
RTS_CTS control and TX rate limit. Tx rate limit is
similar to auto rate but it will be limited to the user
configured rate mask rather than the station's highest
supported rate mask. Here ext_tid_cfg_bitmap added
to notify the target which extended configuration
parameter has modified(here RTS_CTS).
WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT service flag
introduced to advertise this support.
Testing:
* Tested HW: QCA9984
* Tested FW: 10.4-3.9.0.2-00021
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/core.c | 4 +++
drivers/net/wireless/ath/ath10k/mac.c | 48 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 9 ++++--
drivers/net/wireless/ath/ath10k/wmi.h | 20 +++++++++++++
4 files changed, 78 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index ac2cf3f..248709d 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2623,6 +2623,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
if (test_bit(WMI_SERVICE_REPORT_AIRTIME, ar->wmi.svc_map))
val |= WMI_10_4_REPORT_AIRTIME;
+ if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ ar->wmi.svc_map))
+ val |= WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT;
+
status = ath10k_mac_ext_resource_config(ar, val);
if (status) {
ath10k_err(ar,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e5ae054..5d4611e 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2950,6 +2950,12 @@ static int ath10k_new_peer_tid_config(struct ath10k *ar,
arg.aggr_control = vif->ampdu[i];
arg.rate_ctrl = vif->rate_ctrl[i];
arg.rcode_flags = vif->rate_code[i];
+ if (vif->rtscts[i])
+ arg.ext_tid_cfg_bitmap =
+ WMI_EXT_TID_RTS_CTS_CONFIG;
+ else
+ arg.ext_tid_cfg_bitmap = 0;
+ arg.rtscts_ctrl = vif->rtscts[i];
}
if (vif->noack[i]) {
@@ -6560,6 +6566,10 @@ static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
if (txrate_type == NL80211_TX_RATE_FIXED)
*rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE;
+ else if (txrate_type == NL80211_TX_RATE_LIMITED &&
+ (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ ar->wmi.svc_map)))
+ *rate_ctrl = WMI_PEER_TID_CONFIG_RATE_UPPER_CAP;
else
return -EOPNOTSUPP;
return 0;
@@ -6626,6 +6636,14 @@ static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
arg->rate_ctrl = 0;
}
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ if (tid_conf->rtscts)
+ arg->rtscts_ctrl = tid_conf->rtscts - 1;
+ else
+ arg->rtscts_ctrl = WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE;
+ arg->ext_tid_cfg_bitmap = WMI_EXT_TID_RTS_CTS_CONFIG;
+ }
}
static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
@@ -6706,6 +6724,18 @@ static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
}
}
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ if (sta->rtscts[i]) {
+ arg.rtscts_ctrl = 0;
+ arg.ext_tid_cfg_bitmap = 0;
+ } else {
+ arg.rtscts_ctrl = vif->rtscts[i] - 1;
+ arg.ext_tid_cfg_bitmap =
+ WMI_EXT_TID_RTS_CTS_CONFIG;
+ config_apply = true;
+ }
+ }
+
arg.tid = i;
if (config_apply) {
@@ -8401,6 +8431,13 @@ static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
arg.rate_ctrl = 0;
arg.rcode_flags = 0;
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ sta->rtscts[arg.tid] =
+ tid_config->tid_conf[i].rtscts;
+ arg.rtscts_ctrl = 0;
+ arg.ext_tid_cfg_bitmap = 0;
+ }
} else {
arvif->tid_conf_changed[arg.tid] |= changed;
@@ -8420,6 +8457,10 @@ static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
vif->rate_ctrl[arg.tid] = arg.rate_ctrl;
vif->rate_code[arg.tid] = arg.rcode_flags;
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS)
+ vif->rtscts[arg.tid] =
+ tid_config->tid_conf[i].rtscts;
}
}
@@ -9166,6 +9207,13 @@ int ath10k_mac_register(struct ath10k *ar)
ar->ops->set_tid_config = NULL;
ar->hw->wiphy->flags &= ~WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT;
}
+
+ if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, ar->wmi.svc_map)) {
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL);
+ }
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 44b66f2..6ae3f8c 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -8884,11 +8884,14 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
cmd->rate_control = cpu_to_le32(arg->rate_ctrl);
cmd->retry_count = cpu_to_le32(arg->retry_count);
cmd->rcode_flags = cpu_to_le32(arg->rcode_flags);
+ cmd->ext_tid_cfg_bitmap = cpu_to_le32(arg->ext_tid_cfg_bitmap);
+ cmd->rtscts_ctrl = cpu_to_le32(arg->rtscts_ctrl);
ath10k_dbg(ar, ATH10K_DBG_WMI,
- "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d mac_addr %pM\n",
- arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control, arg->rate_ctrl,
- arg->rcode_flags, arg->retry_count, arg->peer_macaddr.addr);
+ "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d rtscts %d ext_tid_cfg_bitmap %d mac_addr %pM\n",
+ arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control,
+ arg->rate_ctrl, arg->rcode_flags, arg->retry_count, arg->rtscts_ctrl,
+ arg->ext_tid_cfg_bitmap, arg->peer_macaddr.addr);
return skb;
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 187c13e..21a328f 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -201,6 +201,7 @@ enum wmi_service {
WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
WMI_SERVICE_REPORT_AIRTIME,
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
/* Remember to add the new value to wmi_service_name()! */
@@ -493,6 +494,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
+ SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
case WMI_SERVICE_MAX:
return NULL;
@@ -822,6 +824,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_REPORT_AIRTIME, len);
SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, len);
}
#undef SVCMAP
@@ -7169,6 +7173,16 @@ enum wmi_tid_rate_ctrl_conf {
WMI_TID_CONFIG_RATE_CONTROL_AUTO,
WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+ WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
+};
+
+enum wmi_tid_rtscts_control_conf {
+ WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
+ WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
+};
+
+enum wmi_ext_tid_config_map {
+ WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
};
struct wmi_per_peer_per_tid_cfg_arg {
@@ -7180,6 +7194,8 @@ struct wmi_per_peer_per_tid_cfg_arg {
u8 rate_ctrl;
u32 retry_count;
u32 rcode_flags;
+ u32 ext_tid_cfg_bitmap;
+ u32 rtscts_ctrl;
};
struct wmi_peer_per_tid_cfg_cmd {
@@ -7195,6 +7211,10 @@ struct wmi_peer_per_tid_cfg_cmd {
__le32 rate_control;
__le32 rcode_flags;
__le32 retry_count;
+ /* See enum wmi_ext_tid_config_map */
+ __le32 ext_tid_cfg_bitmap;
+ /* see enum wmi_tid_rtscts_control_conf */
+ __le32 rtscts_ctrl;
} __packed;
enum wmi_txbf_conf {
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 20+ messages in thread
end of thread, other threads:[~2019-03-11 6:51 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-11 6:48 [PATCHv4 0/9] cfg80211/mac80211: Add support for TID specific configuration Tamizh chelvam
2019-03-11 6:48 ` Tamizh chelvam
2019-03-11 6:48 ` [PATCHv4 1/9] nl80211: New netlink command " Tamizh chelvam
2019-03-11 6:48 ` Tamizh chelvam
2019-03-11 6:48 ` [PATCHv4 2/9] nl80211: Add new netlink attribute for TID speicific retry count Tamizh chelvam
2019-03-11 6:48 ` Tamizh chelvam
2019-03-11 6:48 ` [PATCHv4 3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable Tamizh chelvam
2019-03-11 6:48 ` Tamizh chelvam
2019-03-11 6:48 ` [PATCHv4 4/9] nl80211: Add netlink attribute to enable/disable RTS_CTS Tamizh chelvam
2019-03-11 6:48 ` Tamizh chelvam
2019-03-11 6:48 ` [PATCHv4 5/9] nl80211: Add netlink attribute to configure TID specific tx rate Tamizh chelvam
2019-03-11 6:48 ` Tamizh chelvam
2019-03-11 6:48 ` [PATCHv4 6/9] mac80211: Add api to support configuring TID specific configuration Tamizh chelvam
2019-03-11 6:48 ` Tamizh chelvam
2019-03-11 6:48 ` [PATCHv4 7/9] ath10k: Add wmi command support for station specific TID config Tamizh chelvam
2019-03-11 6:48 ` Tamizh chelvam
2019-03-11 6:48 ` [PATCHv4 8/9] ath10k: Add new api to support TID specific configuration Tamizh chelvam
2019-03-11 6:48 ` Tamizh chelvam
2019-03-11 6:48 ` [PATCHv4 9/9] ath10k: Add extended TID configuration support Tamizh chelvam
2019-03-11 6:48 ` Tamizh chelvam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.