* [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
@ 2019-03-11 15:21 Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 01/15] s390 vfio-ccw: Add bootindex property and IPLB data Jason J. Herne
` (22 more replies)
0 siblings, 23 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
This is to support booting from vfio-ccw dasd devices. We basically implement
the real hardware ipl procedure. This allows for booting Linux guests on
vfio-ccw devices.
vfio-ccw's channel program prefetch algorithm complicates ipl because most ipl
channel programs dynamically modify themselves. Details on the ipl process and
how we worked around this issue can be found in docs/devel/s390-dasd-ipl.txt.
*********************
NOTE: Newer DASD units which initially present as control unit type 3990 may in
fact really be 2107. Some operating systems may enable 2107 features for these
devices thereby making sense id return a control unit type of 2107. I've added
support for control unit type 2107 so we can ipl from these devices.
*********************
Changelog
==========
v4
01/16: s390 vfio-ccw: Add bootindex property and IPLB data
- Adding CCW_DEVTYPE_VIRTIO_NET type.
- s390_get_ccw_device can now accept a NULL devtype argument
- Other minor refactors
06/16: s390-bios: Clean up cio.h
- Remove whitespace changes to cmd_orb struct
07/16: s390-bios: Decouple channel i/o logic from virtio
- Fix copyright line
08/16: s390-bios: Map low core memory
- Remove Lowcore entries >= 0x200
- Repositioned const keywords
09/16: s390-bios: ptr2u32 and u32toptr
- Add assert to ensure pointer being converted to u32 is below 32 bits in length
- Add missing copyright comment
10/16: s390-bios: Support for running format-0/1 channel programs
- basic_sense now calls __do_cio instead of do_cio. Further protection from
infinite recursion.
- __do_cio now asks for retry for subchannel busy case.
- Minor fixups to comments and message wording
- start.S: Formating and register naming cleanups
- Added CU_TYPE_DASD_2107
11/16: s390-bios: cio error handling
- Only print sense data when it is provided
15/16:
- Added support for CU_TYPE_DASD_2107
16/16:
- Merged with various earlier patches
Jason J. Herne (15):
s390 vfio-ccw: Add bootindex property and IPLB data
s390-bios: decouple cio setup from virtio
s390-bios: decouple common boot logic from virtio
s390-bios: Extend find_dev() for non-virtio devices
s390-bios: Factor finding boot device out of virtio code path
s390-bios: Clean up cio.h
s390-bios: Decouple channel i/o logic from virtio
s390-bios: Map low core memory
s390-bios: ptr2u32 and u32toptr
s390-bios: Support for running format-0/1 channel programs
s390-bios: cio error handling
s390-bios: Refactor virtio to run channel programs via cio
s390-bios: Use control unit type to determine boot method
s390-bios: Add channel command codes/structs needed for dasd-ipl
s390-bios: Support booting from real dasd device
MAINTAINERS | 2 +
docs/devel/s390-dasd-ipl.txt | 133 ++++++++++++++
hw/s390x/ipl.c | 61 +++++--
hw/s390x/s390-ccw.c | 9 +
hw/vfio/ccw.c | 2 +-
include/hw/s390x/s390-ccw.h | 1 +
include/hw/s390x/vfio-ccw.h | 28 +++
pc-bios/s390-ccw/Makefile | 2 +-
pc-bios/s390-ccw/cio.c | 423 +++++++++++++++++++++++++++++++++++++++++++
pc-bios/s390-ccw/cio.h | 270 +++++++++++++++++++++------
pc-bios/s390-ccw/dasd-ipl.c | 250 +++++++++++++++++++++++++
pc-bios/s390-ccw/dasd-ipl.h | 16 ++
pc-bios/s390-ccw/helper.h | 31 ++++
pc-bios/s390-ccw/libc.h | 11 ++
pc-bios/s390-ccw/main.c | 161 ++++++++++------
pc-bios/s390-ccw/netboot.mak | 2 +-
pc-bios/s390-ccw/netmain.c | 2 +
pc-bios/s390-ccw/s390-arch.h | 103 +++++++++++
pc-bios/s390-ccw/s390-ccw.h | 10 +-
pc-bios/s390-ccw/start.S | 29 +++
pc-bios/s390-ccw/virtio.c | 73 ++------
tests/boot-serial-test.c | 2 +-
22 files changed, 1425 insertions(+), 196 deletions(-)
create mode 100644 docs/devel/s390-dasd-ipl.txt
create mode 100644 include/hw/s390x/vfio-ccw.h
create mode 100644 pc-bios/s390-ccw/cio.c
create mode 100644 pc-bios/s390-ccw/dasd-ipl.c
create mode 100644 pc-bios/s390-ccw/dasd-ipl.h
create mode 100644 pc-bios/s390-ccw/helper.h
create mode 100644 pc-bios/s390-ccw/s390-arch.h
--
2.7.4
^ permalink raw reply [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 01/15] s390 vfio-ccw: Add bootindex property and IPLB data
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 02/15] s390-bios: decouple cio setup from virtio Jason J. Herne
` (21 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Add bootindex property and iplb data for vfio-ccw devices. This allows us to
forward boot information into the bios for vfio-ccw devices.
Refactor s390_get_ccw_device() to return device type. This prevents us from
having to use messy casting logic in several places.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
---
MAINTAINERS | 1 +
hw/s390x/ipl.c | 61 ++++++++++++++++++++++++++++++++++-----------
hw/s390x/s390-ccw.c | 9 +++++++
hw/vfio/ccw.c | 2 +-
include/hw/s390x/s390-ccw.h | 1 +
include/hw/s390x/vfio-ccw.h | 28 +++++++++++++++++++++
6 files changed, 86 insertions(+), 16 deletions(-)
create mode 100644 include/hw/s390x/vfio-ccw.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 5040d9d..4801a48 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1430,6 +1430,7 @@ S: Supported
F: hw/vfio/ccw.c
F: hw/s390x/s390-ccw.c
F: include/hw/s390x/s390-ccw.h
+F: include/hw/s390x/vfio-ccw.h
T: git https://github.com/cohuck/qemu.git s390-next
L: qemu-s390x@nongnu.org
diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
index 896888b..2307e5b 100644
--- a/hw/s390x/ipl.c
+++ b/hw/s390x/ipl.c
@@ -19,6 +19,7 @@
#include "hw/loader.h"
#include "hw/boards.h"
#include "hw/s390x/virtio-ccw.h"
+#include "hw/s390x/vfio-ccw.h"
#include "hw/s390x/css.h"
#include "hw/s390x/ebcdic.h"
#include "ipl.h"
@@ -305,16 +306,36 @@ static void s390_ipl_set_boot_menu(S390IPLState *ipl)
*timeout = cpu_to_be32(splash_time);
}
-static CcwDevice *s390_get_ccw_device(DeviceState *dev_st)
+#define CCW_DEVTYPE_NONE 0x00
+#define CCW_DEVTYPE_VIRTIO 0x01
+#define CCW_DEVTYPE_VIRTIO_NET 0x02
+#define CCW_DEVTYPE_SCSI 0x03
+#define CCW_DEVTYPE_VFIO 0x04
+
+static CcwDevice *s390_get_ccw_device(DeviceState *dev_st, int *devtype)
{
CcwDevice *ccw_dev = NULL;
+ int tmp_dt = CCW_DEVTYPE_NONE;
if (dev_st) {
+ VirtIONet *virtio_net_dev = (VirtIONet *)
+ object_dynamic_cast(OBJECT(dev_st), TYPE_VIRTIO_NET);
VirtioCcwDevice *virtio_ccw_dev = (VirtioCcwDevice *)
object_dynamic_cast(OBJECT(qdev_get_parent_bus(dev_st)->parent),
TYPE_VIRTIO_CCW_DEVICE);
+ VFIOCCWDevice *vfio_ccw_dev = (VFIOCCWDevice *)
+ object_dynamic_cast(OBJECT(dev_st), TYPE_VFIO_CCW);
+
if (virtio_ccw_dev) {
ccw_dev = CCW_DEVICE(virtio_ccw_dev);
+ if (virtio_net_dev) {
+ tmp_dt = CCW_DEVTYPE_VIRTIO_NET;
+ } else {
+ tmp_dt = CCW_DEVTYPE_VIRTIO;
+ }
+ } else if (vfio_ccw_dev) {
+ ccw_dev = CCW_DEVICE(vfio_ccw_dev);
+ tmp_dt = CCW_DEVTYPE_VFIO;
} else {
SCSIDevice *sd = (SCSIDevice *)
object_dynamic_cast(OBJECT(dev_st),
@@ -327,9 +348,13 @@ static CcwDevice *s390_get_ccw_device(DeviceState *dev_st)
ccw_dev = (CcwDevice *)object_dynamic_cast(OBJECT(scsi_ccw),
TYPE_CCW_DEVICE);
+ tmp_dt = CCW_DEVTYPE_SCSI;
}
}
}
+ if (devtype) {
+ *devtype = tmp_dt;
+ }
return ccw_dev;
}
@@ -337,20 +362,22 @@ static bool s390_gen_initial_iplb(S390IPLState *ipl)
{
DeviceState *dev_st;
CcwDevice *ccw_dev = NULL;
+ SCSIDevice *sd;
+ int devtype;
dev_st = get_boot_device(0);
if (dev_st) {
- ccw_dev = s390_get_ccw_device(dev_st);
+ ccw_dev = s390_get_ccw_device(dev_st, &devtype);
}
/*
* Currently allow IPL only from CCW devices.
*/
if (ccw_dev) {
- SCSIDevice *sd = (SCSIDevice *) object_dynamic_cast(OBJECT(dev_st),
- TYPE_SCSI_DEVICE);
-
- if (sd) {
+ switch (devtype) {
+ case CCW_DEVTYPE_SCSI:
+ sd = (SCSIDevice *) object_dynamic_cast(OBJECT(dev_st),
+ TYPE_SCSI_DEVICE);
ipl->iplb.len = cpu_to_be32(S390_IPLB_MIN_QEMU_SCSI_LEN);
ipl->iplb.blk0_len =
cpu_to_be32(S390_IPLB_MIN_QEMU_SCSI_LEN - S390_IPLB_HEADER_LEN);
@@ -360,20 +387,24 @@ static bool s390_gen_initial_iplb(S390IPLState *ipl)
ipl->iplb.scsi.channel = cpu_to_be16(sd->channel);
ipl->iplb.scsi.devno = cpu_to_be16(ccw_dev->sch->devno);
ipl->iplb.scsi.ssid = ccw_dev->sch->ssid & 3;
- } else {
- VirtIONet *vn = (VirtIONet *) object_dynamic_cast(OBJECT(dev_st),
- TYPE_VIRTIO_NET);
-
+ break;
+ case CCW_DEVTYPE_VFIO:
+ ipl->iplb.len = cpu_to_be32(S390_IPLB_MIN_CCW_LEN);
+ ipl->iplb.pbt = S390_IPL_TYPE_CCW;
+ ipl->iplb.ccw.devno = cpu_to_be16(ccw_dev->sch->devno);
+ ipl->iplb.ccw.ssid = ccw_dev->sch->ssid & 3;
+ break;
+ case CCW_DEVTYPE_VIRTIO_NET:
+ ipl->netboot = true;
+ /* Fall through to CCW_DEVTYPE_VIRTIO case */
+ case CCW_DEVTYPE_VIRTIO:
ipl->iplb.len = cpu_to_be32(S390_IPLB_MIN_CCW_LEN);
ipl->iplb.blk0_len =
cpu_to_be32(S390_IPLB_MIN_CCW_LEN - S390_IPLB_HEADER_LEN);
ipl->iplb.pbt = S390_IPL_TYPE_CCW;
ipl->iplb.ccw.devno = cpu_to_be16(ccw_dev->sch->devno);
ipl->iplb.ccw.ssid = ccw_dev->sch->ssid & 3;
-
- if (vn) {
- ipl->netboot = true;
- }
+ break;
}
if (!s390_ipl_set_loadparm(ipl->iplb.loadparm)) {
@@ -532,7 +563,7 @@ void s390_ipl_reset_request(CPUState *cs, enum s390_reset reset_type)
!ipl->netboot &&
ipl->iplb.pbt == S390_IPL_TYPE_CCW &&
is_virtio_scsi_device(&ipl->iplb)) {
- CcwDevice *ccw_dev = s390_get_ccw_device(get_boot_device(0));
+ CcwDevice *ccw_dev = s390_get_ccw_device(get_boot_device(0), NULL);
if (ccw_dev &&
cpu_to_be16(ccw_dev->sch->devno) == ipl->iplb.ccw.devno &&
diff --git a/hw/s390x/s390-ccw.c b/hw/s390x/s390-ccw.c
index cad91ee..f5f025d 100644
--- a/hw/s390x/s390-ccw.c
+++ b/hw/s390x/s390-ccw.c
@@ -124,6 +124,14 @@ static void s390_ccw_unrealize(S390CCWDevice *cdev, Error **errp)
g_free(cdev->mdevid);
}
+static void s390_ccw_instance_init(Object *obj)
+{
+ S390CCWDevice *dev = S390_CCW_DEVICE(obj);
+
+ device_add_bootindex_property(obj, &dev->bootindex, "bootindex",
+ "/disk@0,0", DEVICE(obj), NULL);
+}
+
static void s390_ccw_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
@@ -137,6 +145,7 @@ static void s390_ccw_class_init(ObjectClass *klass, void *data)
static const TypeInfo s390_ccw_info = {
.name = TYPE_S390_CCW,
.parent = TYPE_CCW_DEVICE,
+ .instance_init = s390_ccw_instance_init,
.instance_size = sizeof(S390CCWDevice),
.class_size = sizeof(S390CCWDeviceClass),
.class_init = s390_ccw_class_init,
diff --git a/hw/vfio/ccw.c b/hw/vfio/ccw.c
index 9246729..507d513 100644
--- a/hw/vfio/ccw.c
+++ b/hw/vfio/ccw.c
@@ -21,11 +21,11 @@
#include "hw/vfio/vfio.h"
#include "hw/vfio/vfio-common.h"
#include "hw/s390x/s390-ccw.h"
+#include "hw/s390x/vfio-ccw.h"
#include "hw/s390x/ccw-device.h"
#include "exec/address-spaces.h"
#include "qemu/error-report.h"
-#define TYPE_VFIO_CCW "vfio-ccw"
typedef struct VFIOCCWDevice {
S390CCWDevice cdev;
VFIODevice vdev;
diff --git a/include/hw/s390x/s390-ccw.h b/include/hw/s390x/s390-ccw.h
index 7d15a1a..901d805 100644
--- a/include/hw/s390x/s390-ccw.h
+++ b/include/hw/s390x/s390-ccw.h
@@ -27,6 +27,7 @@ typedef struct S390CCWDevice {
CcwDevice parent_obj;
CssDevId hostid;
char *mdevid;
+ int32_t bootindex;
} S390CCWDevice;
typedef struct S390CCWDeviceClass {
diff --git a/include/hw/s390x/vfio-ccw.h b/include/hw/s390x/vfio-ccw.h
new file mode 100644
index 0000000..2fceaa2
--- /dev/null
+++ b/include/hw/s390x/vfio-ccw.h
@@ -0,0 +1,28 @@
+/*
+ * vfio based subchannel assignment support
+ *
+ * Copyright 2017 IBM Corp.
+ * Author(s): Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
+ * Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
+ * Pierre Morel <pmorel@linux.vnet.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#ifndef HW_VFIO_CCW_H
+#define HW_VFIO_CCW_H
+
+#include "hw/vfio/vfio-common.h"
+#include "hw/s390x/s390-ccw.h"
+#include "hw/s390x/ccw-device.h"
+
+#define TYPE_VFIO_CCW "vfio-ccw"
+#define VFIO_CCW(obj) \
+ OBJECT_CHECK(VFIOCCWDevice, (obj), TYPE_VFIO_CCW)
+
+#define TYPE_VFIO_CCW "vfio-ccw"
+typedef struct VFIOCCWDevice VFIOCCWDevice;
+
+#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 02/15] s390-bios: decouple cio setup from virtio
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 01/15] s390 vfio-ccw: Add bootindex property and IPLB data Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 17:36 ` Cornelia Huck
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 03/15] s390-bios: decouple common boot logic " Jason J. Herne
` (20 subsequent siblings)
22 siblings, 1 reply; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Move channel i/o setup code out to a separate function. This decouples cio
setup from the virtio code path and allows us to make use of it for booting
dasd devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
pc-bios/s390-ccw/main.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 544851d..e82fe2c 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -99,6 +99,18 @@ static void menu_setup(void)
}
}
+/*
+ * Initialize the channel I/O subsystem so we can talk to our ipl/boot device.
+ */
+static void css_setup(void)
+{
+ /*
+ * Unconditionally enable mss support. In every sane configuration this
+ * will succeed; and even if it doesn't, stsch_err() can handle it.
+ */
+ enable_mss_facility();
+}
+
static void virtio_setup(void)
{
Schib schib;
@@ -109,13 +121,6 @@ static void virtio_setup(void)
VDev *vdev = virtio_get_device();
QemuIplParameters *early_qipl = (QemuIplParameters *)QIPL_ADDRESS;
- /*
- * We unconditionally enable mss support. In every sane configuration,
- * this will succeed; and even if it doesn't, stsch_err() can deal
- * with the consequences.
- */
- enable_mss_facility();
-
sclp_get_loadparm_ascii(loadparm_str);
memcpy(ldp + 10, loadparm_str, LOADPARM_LEN);
sclp_print(ldp);
@@ -168,6 +173,7 @@ static void virtio_setup(void)
int main(void)
{
sclp_setup();
+ css_setup();
virtio_setup();
zipl_load(); /* no return */
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 03/15] s390-bios: decouple common boot logic from virtio
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 01/15] s390 vfio-ccw: Add bootindex property and IPLB data Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 02/15] s390-bios: decouple cio setup from virtio Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 04/15] s390-bios: Extend find_dev() for non-virtio devices Jason J. Herne
` (19 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Create a boot_setup function to handle getting boot information from
the machine/hypervisor. This decouples common boot logic from the
virtio code path and allows us to make use of it for the real dasd boot
scenario.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
---
pc-bios/s390-ccw/main.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index e82fe2c..67df421 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -14,16 +14,17 @@
char stack[PAGE_SIZE * 8] __attribute__((__aligned__(PAGE_SIZE)));
static SubChannelId blk_schid = { .one = 1 };
-IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
static char loadparm_str[LOADPARM_LEN + 1] = { 0, 0, 0, 0, 0, 0, 0, 0, 0 };
QemuIplParameters qipl;
+IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
+static bool have_iplb;
#define LOADPARM_PROMPT "PROMPT "
#define LOADPARM_EMPTY " "
#define BOOT_MENU_FLAG_MASK (QIPL_FLAG_BM_OPTS_CMD | QIPL_FLAG_BM_OPTS_ZIPL)
/*
- * Priniciples of Operations (SA22-7832-09) chapter 17 requires that
+ * Principles of Operations (SA22-7832-09) chapter 17 requires that
* a subsystem-identification is at 184-187 and bytes 188-191 are zero
* after list-directed-IPL and ccw-IPL.
*/
@@ -111,23 +112,33 @@ static void css_setup(void)
enable_mss_facility();
}
+/*
+ * Collect various pieces of information from the hypervisor/hardware that
+ * we'll use to determine exactly how we'll boot.
+ */
+static void boot_setup(void)
+{
+ char lpmsg[] = "LOADPARM=[________]\n";
+
+ sclp_get_loadparm_ascii(loadparm_str);
+ memcpy(lpmsg + 10, loadparm_str, 8);
+ sclp_print(lpmsg);
+
+ have_iplb = store_iplb(&iplb);
+}
+
static void virtio_setup(void)
{
Schib schib;
int ssid;
bool found = false;
uint16_t dev_no;
- char ldp[] = "LOADPARM=[________]\n";
VDev *vdev = virtio_get_device();
QemuIplParameters *early_qipl = (QemuIplParameters *)QIPL_ADDRESS;
- sclp_get_loadparm_ascii(loadparm_str);
- memcpy(ldp + 10, loadparm_str, LOADPARM_LEN);
- sclp_print(ldp);
-
memcpy(&qipl, early_qipl, sizeof(QemuIplParameters));
- if (store_iplb(&iplb)) {
+ if (have_iplb) {
switch (iplb.pbt) {
case S390_IPL_TYPE_CCW:
dev_no = iplb.ccw.devno;
@@ -174,6 +185,7 @@ int main(void)
{
sclp_setup();
css_setup();
+ boot_setup();
virtio_setup();
zipl_load(); /* no return */
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 04/15] s390-bios: Extend find_dev() for non-virtio devices
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (2 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 03/15] s390-bios: decouple common boot logic " Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 05/15] s390-bios: Factor finding boot device out of virtio code path Jason J. Herne
` (18 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
We need a method for finding the subchannel of a dasd device. Let's
modify find_dev to handle this since it mostly does what we need. Up to
this point find_dev has been specific to only virtio devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
---
pc-bios/s390-ccw/main.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 67df421..7e3f65e 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -49,6 +49,12 @@ unsigned int get_loadparm_index(void)
return atoui(loadparm_str);
}
+/*
+ * Find the subchannel connected to the given device (dev_no) and fill in the
+ * subchannel information block (schib) with the connected subchannel's info.
+ * NOTE: The global variable blk_schid is updated to contain the subchannel
+ * information.
+ */
static bool find_dev(Schib *schib, int dev_no)
{
int i, r;
@@ -62,15 +68,15 @@ static bool find_dev(Schib *schib, int dev_no)
if (!schib->pmcw.dnv) {
continue;
}
- if (!virtio_is_supported(blk_schid)) {
- continue;
- }
+
/* Skip net devices since no IPLB is created and therefore no
- * no network bootloader has been loaded
+ * network bootloader has been loaded
*/
- if (virtio_get_device_type() == VIRTIO_ID_NET && dev_no < 0) {
+ if (virtio_is_supported(blk_schid) &&
+ virtio_get_device_type() == VIRTIO_ID_NET && dev_no < 0) {
continue;
}
+
if ((dev_no < 0) || (schib->pmcw.dev == dev_no)) {
return true;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 05/15] s390-bios: Factor finding boot device out of virtio code path
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (3 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 04/15] s390-bios: Extend find_dev() for non-virtio devices Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 06/15] s390-bios: Clean up cio.h Jason J. Herne
` (17 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Make a new routine find_boot_device to locate the boot device for all
cases, not just virtio.
The error message for the case where no boot device has been specified
and a suitable boot device cannot be auto detected was specific to
virtio devices. We update this message to remove virtio specific wording.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
---
pc-bios/s390-ccw/main.c | 85 ++++++++++++++++++++++++++----------------------
tests/boot-serial-test.c | 2 +-
2 files changed, 47 insertions(+), 40 deletions(-)
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 7e3f65e..5b2b941 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -55,17 +55,18 @@ unsigned int get_loadparm_index(void)
* NOTE: The global variable blk_schid is updated to contain the subchannel
* information.
*/
-static bool find_dev(Schib *schib, int dev_no)
+static bool find_subch(int dev_no)
{
+ Schib schib;
int i, r;
for (i = 0; i < 0x10000; i++) {
blk_schid.sch_no = i;
- r = stsch_err(blk_schid, schib);
+ r = stsch_err(blk_schid, &schib);
if ((r == 3) || (r == -EIO)) {
break;
}
- if (!schib->pmcw.dnv) {
+ if (!schib.pmcw.dnv) {
continue;
}
@@ -77,7 +78,7 @@ static bool find_dev(Schib *schib, int dev_no)
continue;
}
- if ((dev_no < 0) || (schib->pmcw.dev == dev_no)) {
+ if ((dev_no < 0) || (schib.pmcw.dev == dev_no)) {
return true;
}
}
@@ -133,56 +134,61 @@ static void boot_setup(void)
have_iplb = store_iplb(&iplb);
}
-static void virtio_setup(void)
+static void find_boot_device(void)
{
- Schib schib;
- int ssid;
- bool found = false;
- uint16_t dev_no;
VDev *vdev = virtio_get_device();
- QemuIplParameters *early_qipl = (QemuIplParameters *)QIPL_ADDRESS;
-
- memcpy(&qipl, early_qipl, sizeof(QemuIplParameters));
+ int ssid;
+ bool found;
- if (have_iplb) {
- switch (iplb.pbt) {
- case S390_IPL_TYPE_CCW:
- dev_no = iplb.ccw.devno;
- debug_print_int("device no. ", dev_no);
- blk_schid.ssid = iplb.ccw.ssid & 0x3;
- debug_print_int("ssid ", blk_schid.ssid);
- found = find_dev(&schib, dev_no);
- break;
- case S390_IPL_TYPE_QEMU_SCSI:
- vdev->scsi_device_selected = true;
- vdev->selected_scsi_device.channel = iplb.scsi.channel;
- vdev->selected_scsi_device.target = iplb.scsi.target;
- vdev->selected_scsi_device.lun = iplb.scsi.lun;
- blk_schid.ssid = iplb.scsi.ssid & 0x3;
- found = find_dev(&schib, iplb.scsi.devno);
- break;
- default:
- panic("List-directed IPL not supported yet!\n");
- }
- menu_setup();
- } else {
+ if (!have_iplb) {
for (ssid = 0; ssid < 0x3; ssid++) {
blk_schid.ssid = ssid;
- found = find_dev(&schib, -1);
+ found = find_subch(-1);
if (found) {
- break;
+ return;
}
}
+ panic("Could not find a suitable boot device (none specified)\n");
+ }
+
+ switch (iplb.pbt) {
+ case S390_IPL_TYPE_CCW:
+ debug_print_int("device no. ", iplb.ccw.devno);
+ blk_schid.ssid = iplb.ccw.ssid & 0x3;
+ debug_print_int("ssid ", blk_schid.ssid);
+ found = find_subch(iplb.ccw.devno);
+ break;
+ case S390_IPL_TYPE_QEMU_SCSI:
+ vdev->scsi_device_selected = true;
+ vdev->selected_scsi_device.channel = iplb.scsi.channel;
+ vdev->selected_scsi_device.target = iplb.scsi.target;
+ vdev->selected_scsi_device.lun = iplb.scsi.lun;
+ blk_schid.ssid = iplb.scsi.ssid & 0x3;
+ found = find_subch(iplb.scsi.devno);
+ break;
+ default:
+ panic("List-directed IPL not supported yet!\n");
}
- IPL_assert(found, "No virtio device found");
+ IPL_assert(found, "Boot device not found\n");
+}
+
+static void virtio_setup(void)
+{
+ VDev *vdev = virtio_get_device();
+ QemuIplParameters *early_qipl = (QemuIplParameters *)QIPL_ADDRESS;
+
+ memcpy(&qipl, early_qipl, sizeof(QemuIplParameters));
+
+ if (have_iplb) {
+ menu_setup();
+ }
if (virtio_get_device_type() == VIRTIO_ID_NET) {
sclp_print("Network boot device detected\n");
vdev->netboot_start_addr = qipl.netboot_start_addr;
} else {
virtio_blk_setup_device(blk_schid);
-
IPL_assert(virtio_ipl_disk_is_valid(), "No valid IPL device detected");
}
}
@@ -192,8 +198,9 @@ int main(void)
sclp_setup();
css_setup();
boot_setup();
- virtio_setup();
+ find_boot_device();
+ virtio_setup();
zipl_load(); /* no return */
panic("Failed to load OS from hard disk\n");
diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c
index 58a48f3..9daf2cb 100644
--- a/tests/boot-serial-test.c
+++ b/tests/boot-serial-test.c
@@ -112,7 +112,7 @@ static testdef_t tests[] = {
{ "sparc", "SS-4", "", "MB86904" },
{ "sparc", "SS-600MP", "", "TMS390Z55" },
{ "sparc64", "sun4u", "", "UltraSPARC" },
- { "s390x", "s390-ccw-virtio", "", "virtio device" },
+ { "s390x", "s390-ccw-virtio", "", "device" },
{ "m68k", "mcf5208evb", "", "TT", sizeof(kernel_mcf5208), kernel_mcf5208 },
{ "microblaze", "petalogix-s3adsp1800", "", "TT",
sizeof(kernel_pls3adsp1800), kernel_pls3adsp1800 },
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 06/15] s390-bios: Clean up cio.h
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (4 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 05/15] s390-bios: Factor finding boot device out of virtio code path Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 07/15] s390-bios: Decouple channel i/o logic from virtio Jason J. Herne
` (16 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Add proper typedefs to all structs and modify all bit fields to use consistent
formatting.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
pc-bios/s390-ccw/cio.h | 114 ++++++++++++++++++++++----------------------
pc-bios/s390-ccw/s390-ccw.h | 8 ----
2 files changed, 57 insertions(+), 65 deletions(-)
diff --git a/pc-bios/s390-ccw/cio.h b/pc-bios/s390-ccw/cio.h
index 1a0795f..ed5b2cb 100644
--- a/pc-bios/s390-ccw/cio.h
+++ b/pc-bios/s390-ccw/cio.h
@@ -17,35 +17,35 @@
* path management control word
*/
struct pmcw {
- __u32 intparm; /* interruption parameter */
- __u32 qf : 1; /* qdio facility */
- __u32 w : 1;
- __u32 isc : 3; /* interruption sublass */
- __u32 res5 : 3; /* reserved zeros */
- __u32 ena : 1; /* enabled */
- __u32 lm : 2; /* limit mode */
- __u32 mme : 2; /* measurement-mode enable */
- __u32 mp : 1; /* multipath mode */
- __u32 tf : 1; /* timing facility */
- __u32 dnv : 1; /* device number valid */
- __u32 dev : 16; /* device number */
- __u8 lpm; /* logical path mask */
- __u8 pnom; /* path not operational mask */
- __u8 lpum; /* last path used mask */
- __u8 pim; /* path installed mask */
- __u16 mbi; /* measurement-block index */
- __u8 pom; /* path operational mask */
- __u8 pam; /* path available mask */
- __u8 chpid[8]; /* CHPID 0-7 (if available) */
- __u32 unused1 : 8; /* reserved zeros */
- __u32 st : 3; /* subchannel type */
- __u32 unused2 : 18; /* reserved zeros */
- __u32 mbfc : 1; /* measurement block format control */
- __u32 xmwme : 1; /* extended measurement word mode enable */
- __u32 csense : 1; /* concurrent sense; can be enabled ...*/
- /* ... per MSCH, however, if facility */
- /* ... is not installed, this results */
- /* ... in an operand exception. */
+ __u32 intparm; /* interruption parameter */
+ __u32 qf:1; /* qdio facility */
+ __u32 w:1;
+ __u32 isc:3; /* interruption sublass */
+ __u32 res5:3; /* reserved zeros */
+ __u32 ena:1; /* enabled */
+ __u32 lm:2; /* limit mode */
+ __u32 mme:2; /* measurement-mode enable */
+ __u32 mp:1; /* multipath mode */
+ __u32 tf:1; /* timing facility */
+ __u32 dnv:1; /* device number valid */
+ __u32 dev:16; /* device number */
+ __u8 lpm; /* logical path mask */
+ __u8 pnom; /* path not operational mask */
+ __u8 lpum; /* last path used mask */
+ __u8 pim; /* path installed mask */
+ __u16 mbi; /* measurement-block index */
+ __u8 pom; /* path operational mask */
+ __u8 pam; /* path available mask */
+ __u8 chpid[8]; /* CHPID 0-7 (if available) */
+ __u32 unused1:8; /* reserved zeros */
+ __u32 st:3; /* subchannel type */
+ __u32 unused2:18; /* reserved zeros */
+ __u32 mbfc:1; /* measurement block format control */
+ __u32 xmwme:1; /* extended measurement word mode enable */
+ __u32 csense:1; /* concurrent sense; can be enabled ...*/
+ /* ... per MSCH, however, if facility */
+ /* ... is not installed, this results */
+ /* ... in an operand exception. */
} __attribute__ ((packed));
/* Target SCHIB configuration. */
@@ -77,28 +77,28 @@ struct scsw {
/*
* subchannel information block
*/
-struct schib {
+typedef struct schib {
struct pmcw pmcw; /* path management control word */
struct scsw scsw; /* subchannel status word */
__u64 mba; /* measurement block address */
__u8 mda[4]; /* model dependent area */
-} __attribute__ ((packed,aligned(4)));
-
-struct subchannel_id {
- __u32 cssid : 8;
- __u32 : 4;
- __u32 m : 1;
- __u32 ssid : 2;
- __u32 one : 1;
- __u32 sch_no : 16;
-} __attribute__ ((packed, aligned(4)));
+} __attribute__ ((packed, aligned(4))) Schib;
+
+typedef struct subchannel_id {
+ __u32 cssid:8;
+ __u32:4;
+ __u32 m:1;
+ __u32 ssid:2;
+ __u32 one:1;
+ __u32 sch_no:16;
+} __attribute__ ((packed, aligned(4))) SubChannelId;
struct chsc_header {
__u16 length;
__u16 code;
} __attribute__((packed));
-struct chsc_area_sda {
+typedef struct chsc_area_sda {
struct chsc_header request;
__u8 reserved1:4;
__u8 format:4;
@@ -111,29 +111,29 @@ struct chsc_area_sda {
__u32 reserved5:4;
__u32 format2:4;
__u32 reserved6:24;
-} __attribute__((packed));
+} __attribute__((packed)) ChscAreaSda;
/*
* TPI info structure
*/
struct tpi_info {
struct subchannel_id schid;
- __u32 intparm; /* interruption parameter */
- __u32 adapter_IO : 1;
- __u32 reserved2 : 1;
- __u32 isc : 3;
- __u32 reserved3 : 12;
- __u32 int_type : 3;
- __u32 reserved4 : 12;
+ __u32 intparm; /* interruption parameter */
+ __u32 adapter_IO:1;
+ __u32 reserved2:1;
+ __u32 isc:3;
+ __u32 reserved3:12;
+ __u32 int_type:3;
+ __u32 reserved4:12;
} __attribute__ ((packed, aligned(4)));
/* channel command word (type 1) */
-struct ccw1 {
+typedef struct ccw1 {
__u8 cmd_code;
__u8 flags;
__u16 count;
__u32 cda;
-} __attribute__ ((packed, aligned(8)));
+} __attribute__ ((packed, aligned(8))) Ccw1;
#define CCW_FLAG_DC 0x80
#define CCW_FLAG_CC 0x40
@@ -162,7 +162,7 @@ struct ccw1 {
/*
* Command-mode operation request block
*/
-struct cmd_orb {
+typedef struct cmd_orb {
__u32 intparm; /* interruption parameter */
__u32 key:4; /* flags, like key, suspend control, etc. */
__u32 spnd:1; /* suspend control */
@@ -182,7 +182,7 @@ struct cmd_orb {
__u32 zero:6; /* reserved zeros */
__u32 orbx:1; /* ORB extension control */
__u32 cpa; /* channel program address */
-} __attribute__ ((packed, aligned(4)));
+} __attribute__ ((packed, aligned(4))) CmdOrb;
struct ciw {
__u8 type;
@@ -193,7 +193,7 @@ struct ciw {
/*
* sense-id response buffer layout
*/
-struct senseid {
+typedef struct senseid {
/* common part */
__u8 reserved; /* always 0x'FF' */
__u16 cu_type; /* control unit type */
@@ -203,15 +203,15 @@ struct senseid {
__u8 unused; /* padding byte */
/* extended part */
struct ciw ciw[62];
-} __attribute__ ((packed, aligned(4)));
+} __attribute__ ((packed, aligned(4))) SenseId;
/* interruption response block */
-struct irb {
+typedef struct irb {
struct scsw scsw;
__u32 esw[5];
__u32 ecw[8];
__u32 emw[8];
-} __attribute__ ((packed, aligned(4)));
+} __attribute__ ((packed, aligned(4))) Irb;
/*
* Some S390 specific IO instructions as inline
diff --git a/pc-bios/s390-ccw/s390-ccw.h b/pc-bios/s390-ccw/s390-ccw.h
index 9828aa2..241c6d0 100644
--- a/pc-bios/s390-ccw/s390-ccw.h
+++ b/pc-bios/s390-ccw/s390-ccw.h
@@ -49,14 +49,6 @@ typedef unsigned long long __u64;
#include "cio.h"
#include "iplb.h"
-typedef struct irb Irb;
-typedef struct ccw1 Ccw1;
-typedef struct cmd_orb CmdOrb;
-typedef struct schib Schib;
-typedef struct chsc_area_sda ChscAreaSda;
-typedef struct senseid SenseId;
-typedef struct subchannel_id SubChannelId;
-
/* start.s */
void disabled_wait(void);
void consume_sclp_int(void);
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 07/15] s390-bios: Decouple channel i/o logic from virtio
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (5 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 06/15] s390-bios: Clean up cio.h Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 17:39 ` Cornelia Huck
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 08/15] s390-bios: Map low core memory Jason J. Herne
` (15 subsequent siblings)
22 siblings, 1 reply; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Create a separate library for channel i/o related code. This decouples
channel i/o operations from virtio and allows us to make use of them for
the real dasd boot path.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
---
pc-bios/s390-ccw/Makefile | 2 +-
pc-bios/s390-ccw/cio.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
pc-bios/s390-ccw/cio.h | 3 +++
pc-bios/s390-ccw/main.c | 1 +
pc-bios/s390-ccw/netboot.mak | 2 +-
pc-bios/s390-ccw/netmain.c | 1 +
pc-bios/s390-ccw/s390-ccw.h | 1 -
pc-bios/s390-ccw/virtio.c | 27 ++-------------------------
8 files changed, 53 insertions(+), 28 deletions(-)
create mode 100644 pc-bios/s390-ccw/cio.c
diff --git a/pc-bios/s390-ccw/Makefile b/pc-bios/s390-ccw/Makefile
index 1eb316b..12ad9c1 100644
--- a/pc-bios/s390-ccw/Makefile
+++ b/pc-bios/s390-ccw/Makefile
@@ -10,7 +10,7 @@ $(call set-vpath, $(SRC_PATH)/pc-bios/s390-ccw)
.PHONY : all clean build-all
OBJECTS = start.o main.o bootmap.o jump2ipl.o sclp.o menu.o \
- virtio.o virtio-scsi.o virtio-blkdev.o libc.o
+ virtio.o virtio-scsi.o virtio-blkdev.o libc.o cio.o
QEMU_CFLAGS := $(filter -W%, $(QEMU_CFLAGS))
QEMU_CFLAGS += -ffreestanding -fno-delete-null-pointer-checks -msoft-float
diff --git a/pc-bios/s390-ccw/cio.c b/pc-bios/s390-ccw/cio.c
new file mode 100644
index 0000000..87c6b34
--- /dev/null
+++ b/pc-bios/s390-ccw/cio.c
@@ -0,0 +1,44 @@
+/*
+ * S390 Channel I/O
+ *
+ * Copyright (c) 2013 Alexander Graf <agraf@suse.de>
+ * Copyright (c) 2019 IBM Corp.
+ *
+ * Author(s): Jason J. Herne <jjherne@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#include "libc.h"
+#include "s390-ccw.h"
+#include "cio.h"
+
+static char chsc_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
+
+int enable_mss_facility(void)
+{
+ int ret;
+ ChscAreaSda *sda_area = (ChscAreaSda *) chsc_page;
+
+ memset(sda_area, 0, PAGE_SIZE);
+ sda_area->request.length = 0x0400;
+ sda_area->request.code = 0x0031;
+ sda_area->operation_code = 0x2;
+
+ ret = chsc(sda_area);
+ if ((ret == 0) && (sda_area->response.code == 0x0001)) {
+ return 0;
+ }
+ return -EIO;
+}
+
+void enable_subchannel(SubChannelId schid)
+{
+ Schib schib;
+
+ stsch_err(schid, &schib);
+ schib.pmcw.ena = 1;
+ msch(schid, &schib);
+}
diff --git a/pc-bios/s390-ccw/cio.h b/pc-bios/s390-ccw/cio.h
index ed5b2cb..218fd96 100644
--- a/pc-bios/s390-ccw/cio.h
+++ b/pc-bios/s390-ccw/cio.h
@@ -213,6 +213,9 @@ typedef struct irb {
__u32 emw[8];
} __attribute__ ((packed, aligned(4))) Irb;
+int enable_mss_facility(void);
+void enable_subchannel(SubChannelId schid);
+
/*
* Some S390 specific IO instructions as inline
*/
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 5b2b941..2d912cb 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -10,6 +10,7 @@
#include "libc.h"
#include "s390-ccw.h"
+#include "cio.h"
#include "virtio.h"
char stack[PAGE_SIZE * 8] __attribute__((__aligned__(PAGE_SIZE)));
diff --git a/pc-bios/s390-ccw/netboot.mak b/pc-bios/s390-ccw/netboot.mak
index 14e96b2..5eefb7c 100644
--- a/pc-bios/s390-ccw/netboot.mak
+++ b/pc-bios/s390-ccw/netboot.mak
@@ -1,7 +1,7 @@
SLOF_DIR := $(SRC_PATH)/roms/SLOF
-NETOBJS := start.o sclp.o virtio.o virtio-net.o jump2ipl.o netmain.o \
+NETOBJS := start.o sclp.o cio.o virtio.o virtio-net.o jump2ipl.o netmain.o \
libnet.a libc.a
LIBC_INC := -nostdinc -I$(SLOF_DIR)/lib/libc/include
diff --git a/pc-bios/s390-ccw/netmain.c b/pc-bios/s390-ccw/netmain.c
index 0392131..5189c0f 100644
--- a/pc-bios/s390-ccw/netmain.c
+++ b/pc-bios/s390-ccw/netmain.c
@@ -33,6 +33,7 @@
#include <pxelinux.h>
#include "s390-ccw.h"
+#include "cio.h"
#include "virtio.h"
#define DEFAULT_BOOT_RETRIES 10
diff --git a/pc-bios/s390-ccw/s390-ccw.h b/pc-bios/s390-ccw/s390-ccw.h
index 241c6d0..b39ee5d 100644
--- a/pc-bios/s390-ccw/s390-ccw.h
+++ b/pc-bios/s390-ccw/s390-ccw.h
@@ -72,7 +72,6 @@ unsigned long virtio_load_direct(ulong rec_list1, ulong rec_list2,
bool virtio_is_supported(SubChannelId schid);
void virtio_blk_setup_device(SubChannelId schid);
int virtio_read(ulong sector, void *load_addr);
-int enable_mss_facility(void);
u64 get_clock(void);
ulong get_second(void);
diff --git a/pc-bios/s390-ccw/virtio.c b/pc-bios/s390-ccw/virtio.c
index cdb66f4..aa9da72 100644
--- a/pc-bios/s390-ccw/virtio.c
+++ b/pc-bios/s390-ccw/virtio.c
@@ -10,6 +10,7 @@
#include "libc.h"
#include "s390-ccw.h"
+#include "cio.h"
#include "virtio.h"
#include "virtio-scsi.h"
#include "bswap.h"
@@ -20,8 +21,6 @@ static VRing block[VIRTIO_MAX_VQS];
static char ring_area[VIRTIO_RING_SIZE * VIRTIO_MAX_VQS]
__attribute__((__aligned__(PAGE_SIZE)));
-static char chsc_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
-
static VDev vdev = {
.nr_vqs = 1,
.vrings = block,
@@ -94,14 +93,9 @@ static int run_ccw(VDev *vdev, int cmd, void *ptr, int len)
{
Ccw1 ccw = {};
CmdOrb orb = {};
- Schib schib;
int r;
- /* start command processing */
- stsch_err(vdev->schid, &schib);
- /* enable the subchannel for IPL device */
- schib.pmcw.ena = 1;
- msch(vdev->schid, &schib);
+ enable_subchannel(vdev->schid);
/* start subchannel command */
orb.fmt = 1;
@@ -343,20 +337,3 @@ bool virtio_is_supported(SubChannelId schid)
}
return false;
}
-
-int enable_mss_facility(void)
-{
- int ret;
- ChscAreaSda *sda_area = (ChscAreaSda *) chsc_page;
-
- memset(sda_area, 0, PAGE_SIZE);
- sda_area->request.length = 0x0400;
- sda_area->request.code = 0x0031;
- sda_area->operation_code = 0x2;
-
- ret = chsc(sda_area);
- if ((ret == 0) && (sda_area->response.code == 0x0001)) {
- return 0;
- }
- return -EIO;
-}
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 08/15] s390-bios: Map low core memory
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (6 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 07/15] s390-bios: Decouple channel i/o logic from virtio Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 09/15] s390-bios: ptr2u32 and u32toptr Jason J. Herne
` (14 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Create a new header for basic architecture specific definitions and add a
mapping of low core memory. This mapping will be used by the real dasd boot
process.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
---
pc-bios/s390-ccw/main.c | 2 +
pc-bios/s390-ccw/s390-arch.h | 90 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 92 insertions(+)
create mode 100644 pc-bios/s390-ccw/s390-arch.h
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 2d912cb..d3a161c 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -9,6 +9,7 @@
*/
#include "libc.h"
+#include "s390-arch.h"
#include "s390-ccw.h"
#include "cio.h"
#include "virtio.h"
@@ -19,6 +20,7 @@ static char loadparm_str[LOADPARM_LEN + 1] = { 0, 0, 0, 0, 0, 0, 0, 0, 0 };
QemuIplParameters qipl;
IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
static bool have_iplb;
+LowCore const *lowcore; /* Yes, this *is* a pointer to address 0 */
#define LOADPARM_PROMPT "PROMPT "
#define LOADPARM_EMPTY " "
diff --git a/pc-bios/s390-ccw/s390-arch.h b/pc-bios/s390-ccw/s390-arch.h
new file mode 100644
index 0000000..5e92c7a
--- /dev/null
+++ b/pc-bios/s390-ccw/s390-arch.h
@@ -0,0 +1,90 @@
+/*
+ * S390 Basic Architecture
+ *
+ * Copyright (c) 2019 Jason J. Herne <jjherne@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#ifndef S390_ARCH_H
+#define S390_ARCH_H
+
+typedef struct PSW {
+ uint64_t mask;
+ uint64_t addr;
+} __attribute__ ((aligned(8))) PSW;
+_Static_assert(sizeof(struct PSW) == 16, "PSW size incorrect");
+
+/* Older PSW format used by LPSW instruction */
+typedef struct PSWLegacy {
+ uint32_t mask;
+ uint32_t addr;
+} __attribute__ ((aligned(8))) PSWLegacy;
+_Static_assert(sizeof(struct PSWLegacy) == 8, "PSWLegacy size incorrect");
+
+/* s390 psw bit masks */
+#define PSW_MASK_IOINT 0x0200000000000000ULL
+#define PSW_MASK_WAIT 0x0002000000000000ULL
+#define PSW_MASK_EAMODE 0x0000000100000000ULL
+#define PSW_MASK_BAMODE 0x0000000080000000ULL
+#define PSW_MASK_ZMODE (PSW_MASK_EAMODE | PSW_MASK_BAMODE)
+
+/* Low core mapping */
+typedef struct LowCore {
+ /* prefix area: defined by architecture */
+ PSWLegacy ipl_psw; /* 0x000 */
+ uint32_t ccw1[2]; /* 0x008 */
+ uint32_t ccw2[2]; /* 0x010 */
+ uint8_t pad1[0x80 - 0x18]; /* 0x018 */
+ uint32_t ext_params; /* 0x080 */
+ uint16_t cpu_addr; /* 0x084 */
+ uint16_t ext_int_code; /* 0x086 */
+ uint16_t svc_ilen; /* 0x088 */
+ uint16_t svc_code; /* 0x08a */
+ uint16_t pgm_ilen; /* 0x08c */
+ uint16_t pgm_code; /* 0x08e */
+ uint32_t data_exc_code; /* 0x090 */
+ uint16_t mon_class_num; /* 0x094 */
+ uint16_t per_perc_atmid; /* 0x096 */
+ uint64_t per_address; /* 0x098 */
+ uint8_t exc_access_id; /* 0x0a0 */
+ uint8_t per_access_id; /* 0x0a1 */
+ uint8_t op_access_id; /* 0x0a2 */
+ uint8_t ar_access_id; /* 0x0a3 */
+ uint8_t pad2[0xA8 - 0xA4]; /* 0x0a4 */
+ uint64_t trans_exc_code; /* 0x0a8 */
+ uint64_t monitor_code; /* 0x0b0 */
+ uint16_t subchannel_id; /* 0x0b8 */
+ uint16_t subchannel_nr; /* 0x0ba */
+ uint32_t io_int_parm; /* 0x0bc */
+ uint32_t io_int_word; /* 0x0c0 */
+ uint8_t pad3[0xc8 - 0xc4]; /* 0x0c4 */
+ uint32_t stfl_fac_list; /* 0x0c8 */
+ uint8_t pad4[0xe8 - 0xcc]; /* 0x0cc */
+ uint64_t mcic; /* 0x0e8 */
+ uint8_t pad5[0xf4 - 0xf0]; /* 0x0f0 */
+ uint32_t external_damage_code; /* 0x0f4 */
+ uint64_t failing_storage_address; /* 0x0f8 */
+ uint8_t pad6[0x110 - 0x100]; /* 0x100 */
+ uint64_t per_breaking_event_addr; /* 0x110 */
+ uint8_t pad7[0x120 - 0x118]; /* 0x118 */
+ PSW restart_old_psw; /* 0x120 */
+ PSW external_old_psw; /* 0x130 */
+ PSW svc_old_psw; /* 0x140 */
+ PSW program_old_psw; /* 0x150 */
+ PSW mcck_old_psw; /* 0x160 */
+ PSW io_old_psw; /* 0x170 */
+ uint8_t pad8[0x1a0 - 0x180]; /* 0x180 */
+ PSW restart_new_psw; /* 0x1a0 */
+ PSW external_new_psw; /* 0x1b0 */
+ PSW svc_new_psw; /* 0x1c0 */
+ PSW program_new_psw; /* 0x1d0 */
+ PSW mcck_new_psw; /* 0x1e0 */
+ PSW io_new_psw; /* 0x1f0 */
+} __attribute__((packed, aligned(8192))) LowCore;
+
+extern LowCore const *lowcore;
+
+#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 09/15] s390-bios: ptr2u32 and u32toptr
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (7 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 08/15] s390-bios: Map low core memory Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 10/15] s390-bios: Support for running format-0/1 channel programs Jason J. Herne
` (13 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Introduce inline functions to convert between pointers and unsigned 32-bit
ints. These are used to hide the ugliness required to avoid compiler
warnings.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
pc-bios/s390-ccw/helper.h | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 pc-bios/s390-ccw/helper.h
diff --git a/pc-bios/s390-ccw/helper.h b/pc-bios/s390-ccw/helper.h
new file mode 100644
index 0000000..78d5bc7
--- /dev/null
+++ b/pc-bios/s390-ccw/helper.h
@@ -0,0 +1,31 @@
+/*
+ * Helper Functions
+ *
+ * Copyright (c) 2019 IBM Corp.
+ *
+ * Author(s): Jason J. Herne <jjherne@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#ifndef S390_CCW_HELPER_H
+#define S390_CCW_HELPER_H
+
+#include "s390-ccw.h"
+
+/* Avoids compiler warnings when casting a pointer to a u32 */
+static inline uint32_t ptr2u32(void *ptr)
+{
+ IPL_assert((uint64_t)ptr <= 0xffffffff, "ptr2u32: ptr too large");
+ return (uint32_t)(uint64_t)ptr;
+}
+
+/* Avoids compiler warnings when casting a u32 to a pointer */
+static inline void *u32toptr(uint32_t n)
+{
+ return (void *)(uint64_t)n;
+}
+
+#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 10/15] s390-bios: Support for running format-0/1 channel programs
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (8 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 09/15] s390-bios: ptr2u32 and u32toptr Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 11/15] s390-bios: cio error handling Jason J. Herne
` (12 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Introduce a library function for executing format-0 and format-1
channel programs and waiting for their completion before continuing
execution.
Add cu_type() to channel io library. This will be used to query control
unit type which is used to determine if we are booting a virtio device or a
real dasd device.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
---
pc-bios/s390-ccw/cio.c | 144 ++++++++++++++++++++++++++++++++++++++++++++
pc-bios/s390-ccw/cio.h | 130 ++++++++++++++++++++++++++++++++++++++-
pc-bios/s390-ccw/s390-ccw.h | 1 +
pc-bios/s390-ccw/start.S | 29 +++++++++
4 files changed, 301 insertions(+), 3 deletions(-)
diff --git a/pc-bios/s390-ccw/cio.c b/pc-bios/s390-ccw/cio.c
index 87c6b34..58f63e4 100644
--- a/pc-bios/s390-ccw/cio.c
+++ b/pc-bios/s390-ccw/cio.c
@@ -13,10 +13,14 @@
#include "libc.h"
#include "s390-ccw.h"
+#include "s390-arch.h"
+#include "helper.h"
#include "cio.h"
static char chsc_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
+static int __do_cio(SubChannelId schid, uint32_t ccw_addr, int fmt, Irb *irb);
+
int enable_mss_facility(void)
{
int ret;
@@ -42,3 +46,143 @@ void enable_subchannel(SubChannelId schid)
schib.pmcw.ena = 1;
msch(schid, &schib);
}
+
+uint16_t cu_type(SubChannelId schid)
+{
+ Ccw1 sense_id_ccw;
+ SenseId sense_data;
+
+ sense_id_ccw.cmd_code = CCW_CMD_SENSE_ID;
+ sense_id_ccw.cda = ptr2u32(&sense_data);
+ sense_id_ccw.count = sizeof(sense_data);
+ sense_id_ccw.flags |= CCW_FLAG_SLI;
+
+ if (do_cio(schid, CU_TYPE_UNKNOWN, ptr2u32(&sense_id_ccw), CCW_FMT1)) {
+ panic("Failed to run SenseID CCw\n");
+ }
+
+ return sense_data.cu_type;
+}
+
+int basic_sense(SubChannelId schid, uint16_t cutype, void *sense_data,
+ uint16_t data_size)
+{
+ Ccw1 senseCcw;
+ Irb irb;
+
+ senseCcw.cmd_code = CCW_CMD_BASIC_SENSE;
+ senseCcw.cda = ptr2u32(sense_data);
+ senseCcw.count = data_size;
+
+ return __do_cio(schid, ptr2u32(&senseCcw), CCW_FMT1, &irb);
+}
+
+static bool irb_error(Irb *irb)
+{
+ if (irb->scsw.cstat) {
+ return true;
+ }
+ return irb->scsw.dstat != (SCSW_DSTAT_DEVEND | SCSW_DSTAT_CHEND);
+}
+
+/*
+ * Handles executing ssch, tsch and returns the irb obtained from tsch.
+ * Returns 0 on success, -1 if unexpected status pending and we need to retry,
+ * otherwise returns condition code from ssch/tsch for error cases.
+ */
+static int __do_cio(SubChannelId schid, uint32_t ccw_addr, int fmt, Irb *irb)
+{
+ CmdOrb orb = {};
+ int rc;
+
+ IPL_assert(fmt == 0 || fmt == 1, "Invalid ccw format");
+
+ /* ccw_addr must be <= 24 bits and point to at least one whole ccw. */
+ if (fmt == 0) {
+ IPL_assert(ccw_addr <= 0xFFFFFF - 8, "Invalid ccw address");
+ }
+
+ orb.fmt = fmt;
+ orb.pfch = 1; /* QEMU's cio implementation requires prefetch */
+ orb.c64 = 1; /* QEMU's cio implementation requires 64-bit idaws */
+ orb.lpm = 0xFF; /* All paths allowed */
+ orb.cpa = ccw_addr;
+
+ rc = ssch(schid, &orb);
+ if (rc == 1 || rc == 2) {
+ /* Subchannel status pending or busy. Eat status and ask for retry. */
+ tsch(schid, irb);
+ return -1;
+ }
+ if (rc) {
+ print_int("ssch failed with cc=", rc);
+ return rc;
+ }
+
+ consume_io_int();
+
+ /* collect status */
+ rc = tsch(schid, irb);
+ if (rc) {
+ print_int("tsch failed with cc=", rc);
+ }
+
+ return rc;
+}
+
+/*
+ * Executes a channel program at a given subchannel. The request to run the
+ * channel program is sent to the subchannel, we then wait for the interrupt
+ * signaling completion of the I/O operation(s) performed by the channel
+ * program. Lastly we verify that the i/o operation completed without error and
+ * that the interrupt we received was for the subchannel used to run the
+ * channel program.
+ *
+ * Note: This function assumes it is running in an environment where no other
+ * cpus are generating or receiving I/O interrupts. So either run it in a
+ * single-cpu environment or make sure all other cpus are not doing I/O and
+ * have I/O interrupts masked off. We also assume that only one device is
+ * active (generating i/o interrupts).
+ *
+ * Returns non-zero on error.
+ */
+int do_cio(SubChannelId schid, uint16_t cutype, uint32_t ccw_addr, int fmt)
+{
+ Irb irb = {};
+ SenseDataEckdDasd sd;
+ int rc, retries = 0;
+
+ while (true) {
+ rc = __do_cio(schid, ccw_addr, fmt, &irb);
+
+ if (rc == -1) {
+ retries++;
+ continue;
+ }
+ if (rc) {
+ /* ssch/tsch error. Message already reported by __do_cio */
+ break;
+ }
+
+ if (!irb_error(&irb)) {
+ break;
+ }
+
+ /*
+ * Unexpected unit check, or interface-control-check. Use sense to
+ * clear (unit check only) then retry.
+ */
+ if ((unit_check(&irb) || iface_ctrl_check(&irb)) && retries <= 2) {
+ if (unit_check(&irb)) {
+ basic_sense(schid, cutype, &sd, sizeof(sd));
+ }
+ retries++;
+ continue;
+ }
+
+ rc = -1;
+ break;
+ }
+
+ return rc;
+}
diff --git a/pc-bios/s390-ccw/cio.h b/pc-bios/s390-ccw/cio.h
index 218fd96..1637e32 100644
--- a/pc-bios/s390-ccw/cio.h
+++ b/pc-bios/s390-ccw/cio.h
@@ -70,9 +70,46 @@ struct scsw {
__u16 count;
} __attribute__ ((packed));
-#define SCSW_FCTL_CLEAR_FUNC 0x1000
-#define SCSW_FCTL_HALT_FUNC 0x2000
+/* Function Control */
#define SCSW_FCTL_START_FUNC 0x4000
+#define SCSW_FCTL_HALT_FUNC 0x2000
+#define SCSW_FCTL_CLEAR_FUNC 0x1000
+
+/* Activity Control */
+#define SCSW_ACTL_RESUME_PEND 0x0800
+#define SCSW_ACTL_START_PEND 0x0400
+#define SCSW_ACTL_HALT_PEND 0x0200
+#define SCSW_ACTL_CLEAR_PEND 0x0100
+#define SCSW_ACTL_CH_ACTIVE 0x0080
+#define SCSW_ACTL_DEV_ACTIVE 0x0040
+#define SCSW_ACTL_SUSPENDED 0x0020
+
+/* Status Control */
+#define SCSW_SCTL_ALERT 0x0010
+#define SCSW_SCTL_INTERMED 0x0008
+#define SCSW_SCTL_PRIMARY 0x0004
+#define SCSW_SCTL_SECONDARY 0x0002
+#define SCSW_SCTL_STATUS_PEND 0x0001
+
+/* SCSW Device Status Flags */
+#define SCSW_DSTAT_ATTN 0x80
+#define SCSW_DSTAT_STATMOD 0x40
+#define SCSW_DSTAT_CUEND 0x20
+#define SCSW_DSTAT_BUSY 0x10
+#define SCSW_DSTAT_CHEND 0x08
+#define SCSW_DSTAT_DEVEND 0x04
+#define SCSW_DSTAT_UCHK 0x02
+#define SCSW_DSTAT_UEXCP 0x01
+
+/* SCSW Subchannel Status Flags */
+#define SCSW_CSTAT_PCINT 0x80
+#define SCSW_CSTAT_BADLEN 0x40
+#define SCSW_CSTAT_PROGCHK 0x20
+#define SCSW_CSTAT_PROTCHK 0x10
+#define SCSW_CSTAT_CHDCHK 0x08
+#define SCSW_CSTAT_CHCCHK 0x04
+#define SCSW_CSTAT_ICCHK 0x02
+#define SCSW_CSTAT_CHAINCHK 0x01
/*
* subchannel information block
@@ -127,7 +164,23 @@ struct tpi_info {
__u32 reserved4:12;
} __attribute__ ((packed, aligned(4)));
-/* channel command word (type 1) */
+/* channel command word (format 0) */
+typedef struct ccw0 {
+ __u8 cmd_code;
+ __u32 cda:24;
+ __u32 chainData:1;
+ __u32 chain:1;
+ __u32 sli:1;
+ __u32 skip:1;
+ __u32 pci:1;
+ __u32 ida:1;
+ __u32 suspend:1;
+ __u32 mida:1;
+ __u8 reserved;
+ __u16 count;
+} __attribute__ ((packed, aligned(8))) Ccw0;
+
+/* channel command word (format 1) */
typedef struct ccw1 {
__u8 cmd_code;
__u8 flags;
@@ -135,6 +188,10 @@ typedef struct ccw1 {
__u32 cda;
} __attribute__ ((packed, aligned(8))) Ccw1;
+/* do_cio() CCW formats */
+#define CCW_FMT0 0x00
+#define CCW_FMT1 0x01
+
#define CCW_FLAG_DC 0x80
#define CCW_FLAG_CC 0x40
#define CCW_FLAG_SLI 0x20
@@ -190,6 +247,11 @@ struct ciw {
__u16 count;
};
+#define CU_TYPE_UNKNOWN 0x0000
+#define CU_TYPE_DASD_2107 0x2107
+#define CU_TYPE_VIRTIO 0x3832
+#define CU_TYPE_DASD_3990 0x3990
+
/*
* sense-id response buffer layout
*/
@@ -205,6 +267,64 @@ typedef struct senseid {
struct ciw ciw[62];
} __attribute__ ((packed, aligned(4))) SenseId;
+/*
+ * architected values for first sense byte - common_status. Bits 0-5 of this
+ * field are common to all device types.
+ */
+#define SNS_STAT0_CMD_REJECT 0x80
+#define SNS_STAT0_INTERVENTION_REQ 0x40
+#define SNS_STAT0_BUS_OUT_CHECK 0x20
+#define SNS_STAT0_EQUIPMENT_CHECK 0x10
+#define SNS_STAT0_DATA_CHECK 0x08
+#define SNS_STAT0_OVERRUN 0x04
+#define SNS_STAT0_INCOMPL_DOMAIN 0x01
+
+/* ECKD DASD status[0] byte */
+#define SNS_STAT1_PERM_ERR 0x80
+#define SNS_STAT1_INV_TRACK_FORMAT 0x40
+#define SNS_STAT1_EOC 0x20
+#define SNS_STAT1_MESSAGE_TO_OPER 0x10
+#define SNS_STAT1_NO_REC_FOUND 0x08
+#define SNS_STAT1_FILE_PROTECTED 0x04
+#define SNS_STAT1_WRITE_INHIBITED 0x02
+#define SNS_STAT1_IMPRECISE_END 0x01
+
+/* ECKD DASD status[1] byte */
+#define SNS_STAT2_REQ_INH_WRITE 0x80
+#define SNS_STAT2_CORRECTABLE 0x40
+#define SNS_STAT2_FIRST_LOG_ERR 0x20
+#define SNS_STAT2_ENV_DATA_PRESENT 0x10
+#define SNS_STAT2_IMPRECISE_END 0x04
+
+/* ECKD DASD 24-byte Sense fmt_msg codes */
+#define SENSE24_FMT_PROG_SYS 0x0
+#define SENSE24_FMT_EQUIPMENT 0x2
+#define SENSE24_FMT_CONTROLLER 0x3
+#define SENSE24_FMT_MISC 0xF
+
+/* basic sense response buffer layout */
+typedef struct SenseDataEckdDasd {
+ uint8_t common_status;
+ uint8_t status[2];
+ uint8_t res_count;
+ uint8_t phys_drive_id;
+ uint8_t low_cyl_addr;
+ uint8_t head_high_cyl_addr;
+ uint8_t fmt_msg;
+ uint64_t fmt_dependent_info[2];
+ uint8_t reserved;
+ uint8_t program_action_code;
+ uint16_t config_info;
+ uint8_t mcode_hicyl;
+ uint8_t cyl_head_addr[3];
+} __attribute__ ((packed, aligned(4))) SenseDataEckdDasd;
+
+#define ECKD_SENSE24_GET_FMT(sd) (sd->fmt_msg & 0xF0 >> 4)
+#define ECKD_SENSE24_GET_MSG(sd) (sd->fmt_msg & 0x0F)
+
+#define unit_check(irb) ((irb)->scsw.dstat & SCSW_DSTAT_UCHK)
+#define iface_ctrl_check(irb) ((irb)->scsw.cstat & SCSW_CSTAT_ICCHK)
+
/* interruption response block */
typedef struct irb {
struct scsw scsw;
@@ -215,6 +335,10 @@ typedef struct irb {
int enable_mss_facility(void);
void enable_subchannel(SubChannelId schid);
+uint16_t cu_type(SubChannelId schid);
+int basic_sense(SubChannelId schid, uint16_t cutype, void *sense_data,
+ uint16_t data_size);
+int do_cio(SubChannelId schid, uint16_t cutype, uint32_t ccw_addr, int fmt);
/*
* Some S390 specific IO instructions as inline
diff --git a/pc-bios/s390-ccw/s390-ccw.h b/pc-bios/s390-ccw/s390-ccw.h
index b39ee5d..11bce7d 100644
--- a/pc-bios/s390-ccw/s390-ccw.h
+++ b/pc-bios/s390-ccw/s390-ccw.h
@@ -52,6 +52,7 @@ typedef unsigned long long __u64;
/* start.s */
void disabled_wait(void);
void consume_sclp_int(void);
+void consume_io_int(void);
/* main.c */
void panic(const char *string);
diff --git a/pc-bios/s390-ccw/start.S b/pc-bios/s390-ccw/start.S
index 5c22cb0..aa8fceb 100644
--- a/pc-bios/s390-ccw/start.S
+++ b/pc-bios/s390-ccw/start.S
@@ -71,6 +71,26 @@ consume_sclp_int:
larl %r1, enabled_wait_psw
lpswe 0(%r1)
+/*
+ * void consume_io_int(void)
+ *
+ * eats one I/O interrupt
+ */
+ .globl consume_io_int
+consume_io_int:
+ /* enable I/O interrupts in cr6 */
+ stctg %c6,%c6,0(%r15)
+ oi 4(%r15), 0xff
+ lctlg %c6,%c6,0(%r15)
+ /* prepare i/o call handler */
+ larl %r1, io_new_code
+ stg %r1, 0x1f8
+ larl %r1, io_new_mask
+ mvc 0x1f0(8),0(%r1)
+ /* load enabled wait PSW */
+ larl %r1, enabled_wait_psw
+ lpswe 0(%r1)
+
external_new_code:
/* disable service interrupts in cr0 */
stctg %c0,%c0,0(%r15)
@@ -78,6 +98,13 @@ external_new_code:
lctlg %c0,%c0,0(%r15)
br %r14
+io_new_code:
+ /* disable I/O interrupts in cr6 */
+ stctg %c6,%c6,0(%r15)
+ ni 4(%r15), 0x00
+ lctlg %c6,%c6,0(%r15)
+ br %r14
+
.align 8
disabled_wait_psw:
.quad 0x0002000180000000,0x0000000000000000
@@ -85,3 +112,5 @@ enabled_wait_psw:
.quad 0x0302000180000000,0x0000000000000000
external_new_mask:
.quad 0x0000000180000000
+io_new_mask:
+ .quad 0x0000000180000000
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 11/15] s390-bios: cio error handling
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (9 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 10/15] s390-bios: Support for running format-0/1 channel programs Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 12/15] s390-bios: Refactor virtio to run channel programs via cio Jason J. Herne
` (11 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Add verbose error output for when unexpected i/o errors happen. This eases the
burden of debugging and reporting i/o errors. No error information is printed
in the success case, here is an example of what is output on error:
cio device error
ssid : 0x0000000000000000
cssid : 0x0000000000000000
sch_no: 0x0000000000000000
Interrupt Response Block Data:
Function Ctrl : [Start]
Activity Ctrl : [Start-Pending]
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status : [Unit-Check]
Channel Status :
cpa=: 0x000000007f8d6038
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
Eckd Dasd Sense Data (fmt 32-bytes):
Sense Condition Flags :
Residual Count =: 0x0000000000000000
Phys Drive ID =: 0x000000000000009e
low cyl address =: 0x0000000000000000
head addr & hi cyl =: 0x0000000000000000
format/message =: 0x0000000000000008
fmt-dependent[0-7] =: 0x0000000000000004
fmt-dependent[8-15]=: 0xe561282305082fff
prog action code =: 0x0000000000000016
Configuration info =: 0x00000000000040e0
mcode / hi-cyl =: 0x0000000000000000
cyl & head addr [0]=: 0x0000000000000000
cyl & head addr [1]=: 0x0000000000000000
cyl & head addr [2]=: 0x0000000000000000
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
---
pc-bios/s390-ccw/cio.c | 237 +++++++++++++++++++++++++++++++++++++++++++++++-
pc-bios/s390-ccw/libc.h | 11 +++
2 files changed, 247 insertions(+), 1 deletion(-)
diff --git a/pc-bios/s390-ccw/cio.c b/pc-bios/s390-ccw/cio.c
index 58f63e4..54fd6ad 100644
--- a/pc-bios/s390-ccw/cio.c
+++ b/pc-bios/s390-ccw/cio.c
@@ -85,6 +85,228 @@ static bool irb_error(Irb *irb)
return irb->scsw.dstat != (SCSW_DSTAT_DEVEND | SCSW_DSTAT_CHEND);
}
+static void print_eckd_dasd_sense_data(SenseDataEckdDasd *sd)
+{
+ char msgline[512];
+
+ if (sd->config_info & 0x8000) {
+ sclp_print("Eckd Dasd Sense Data (fmt 24-bytes):\n");
+ } else {
+ sclp_print("Eckd Dasd Sense Data (fmt 32-bytes):\n");
+ }
+
+ strcat(msgline, " Sense Condition Flags :");
+ if (sd->status[0] & SNS_STAT0_CMD_REJECT) {
+ strcat(msgline, " [Cmd-Reject]");
+ }
+ if (sd->status[0] & SNS_STAT0_INTERVENTION_REQ) {
+ strcat(msgline, " [Intervention-Required]");
+ }
+ if (sd->status[0] & SNS_STAT0_BUS_OUT_CHECK) {
+ strcat(msgline, " [Bus-Out-Parity-Check]");
+ }
+ if (sd->status[0] & SNS_STAT0_EQUIPMENT_CHECK) {
+ strcat(msgline, " [Equipment-Check]");
+ }
+ if (sd->status[0] & SNS_STAT0_DATA_CHECK) {
+ strcat(msgline, " [Data-Check]");
+ }
+ if (sd->status[0] & SNS_STAT0_OVERRUN) {
+ strcat(msgline, " [Overrun]");
+ }
+ if (sd->status[0] & SNS_STAT0_INCOMPL_DOMAIN) {
+ strcat(msgline, " [Incomplete-Domain]");
+ }
+
+ if (sd->status[1] & SNS_STAT1_PERM_ERR) {
+ strcat(msgline, " [Permanent-Error]");
+ }
+ if (sd->status[1] & SNS_STAT1_INV_TRACK_FORMAT) {
+ strcat(msgline, " [Invalid-Track-Fmt]");
+ }
+ if (sd->status[1] & SNS_STAT1_EOC) {
+ strcat(msgline, " [End-of-Cyl]");
+ }
+ if (sd->status[1] & SNS_STAT1_MESSAGE_TO_OPER) {
+ strcat(msgline, " [Operator-Msg]");
+ }
+ if (sd->status[1] & SNS_STAT1_NO_REC_FOUND) {
+ strcat(msgline, " [No-Record-Found]");
+ }
+ if (sd->status[1] & SNS_STAT1_FILE_PROTECTED) {
+ strcat(msgline, " [File-Protected]");
+ }
+ if (sd->status[1] & SNS_STAT1_WRITE_INHIBITED) {
+ strcat(msgline, " [Write-Inhibited]");
+ }
+ if (sd->status[1] & SNS_STAT1_IMPRECISE_END) {
+ strcat(msgline, " [Imprecise-Ending]");
+ }
+
+ if (sd->status[2] & SNS_STAT2_REQ_INH_WRITE) {
+ strcat(msgline, " [Req-Inhibit-Write]");
+ }
+ if (sd->status[2] & SNS_STAT2_CORRECTABLE) {
+ strcat(msgline, " [Correctable-Data-Check]");
+ }
+ if (sd->status[2] & SNS_STAT2_FIRST_LOG_ERR) {
+ strcat(msgline, " [First-Error-Log]");
+ }
+ if (sd->status[2] & SNS_STAT2_ENV_DATA_PRESENT) {
+ strcat(msgline, " [Env-Data-Present]");
+ }
+ if (sd->status[2] & SNS_STAT2_IMPRECISE_END) {
+ strcat(msgline, " [Imprecise-End]");
+ }
+ strcat(msgline, "\n");
+ sclp_print(msgline);
+
+ print_int(" Residual Count =", sd->res_count);
+ print_int(" Phys Drive ID =", sd->phys_drive_id);
+ print_int(" low cyl address =", sd->low_cyl_addr);
+ print_int(" head addr & hi cyl =", sd->head_high_cyl_addr);
+ print_int(" format/message =", sd->fmt_msg);
+ print_int(" fmt-dependent[0-7] =", sd->fmt_dependent_info[0]);
+ print_int(" fmt-dependent[8-15]=", sd->fmt_dependent_info[1]);
+ print_int(" prog action code =", sd->program_action_code);
+ print_int(" Configuration info =", sd->config_info);
+ print_int(" mcode / hi-cyl =", sd->mcode_hicyl);
+ print_int(" cyl & head addr [0]=", sd->cyl_head_addr[0]);
+ print_int(" cyl & head addr [1]=", sd->cyl_head_addr[1]);
+ print_int(" cyl & head addr [2]=", sd->cyl_head_addr[2]);
+}
+
+static void print_irb_err(Irb *irb)
+{
+ uint64_t this_ccw = *(uint64_t *)u32toptr(irb->scsw.cpa);
+ uint64_t prev_ccw = *(uint64_t *)u32toptr(irb->scsw.cpa - 8);
+ char msgline[256];
+
+ sclp_print("Interrupt Response Block Data:\n");
+
+ strcat(msgline, " Function Ctrl :");
+ if (irb->scsw.ctrl & SCSW_FCTL_START_FUNC) {
+ strcat(msgline, " [Start]");
+ }
+ if (irb->scsw.ctrl & SCSW_FCTL_HALT_FUNC) {
+ strcat(msgline, " [Halt]");
+ }
+ if (irb->scsw.ctrl & SCSW_FCTL_CLEAR_FUNC) {
+ strcat(msgline, " [Clear]");
+ }
+ strcat(msgline, "\n");
+ sclp_print(msgline);
+
+ msgline[0] = '\0';
+ strcat(msgline, " Activity Ctrl :");
+ if (irb->scsw.ctrl & SCSW_ACTL_RESUME_PEND) {
+ strcat(msgline, " [Resume-Pending]");
+ }
+ if (irb->scsw.ctrl & SCSW_ACTL_START_PEND) {
+ strcat(msgline, " [Start-Pending]");
+ }
+ if (irb->scsw.ctrl & SCSW_ACTL_HALT_PEND) {
+ strcat(msgline, " [Halt-Pending]");
+ }
+ if (irb->scsw.ctrl & SCSW_ACTL_CLEAR_PEND) {
+ strcat(msgline, " [Clear-Pending]");
+ }
+ if (irb->scsw.ctrl & SCSW_ACTL_CH_ACTIVE) {
+ strcat(msgline, " [Channel-Active]");
+ }
+ if (irb->scsw.ctrl & SCSW_ACTL_DEV_ACTIVE) {
+ strcat(msgline, " [Device-Active]");
+ }
+ if (irb->scsw.ctrl & SCSW_ACTL_SUSPENDED) {
+ strcat(msgline, " [Suspended]");
+ }
+ strcat(msgline, "\n");
+ sclp_print(msgline);
+
+ msgline[0] = '\0';
+ strcat(msgline, " Status Ctrl :");
+ if (irb->scsw.ctrl & SCSW_SCTL_ALERT) {
+ strcat(msgline, " [Alert]");
+ }
+ if (irb->scsw.ctrl & SCSW_SCTL_INTERMED) {
+ strcat(msgline, " [Intermediate]");
+ }
+ if (irb->scsw.ctrl & SCSW_SCTL_PRIMARY) {
+ strcat(msgline, " [Primary]");
+ }
+ if (irb->scsw.ctrl & SCSW_SCTL_SECONDARY) {
+ strcat(msgline, " [Secondary]");
+ }
+ if (irb->scsw.ctrl & SCSW_SCTL_STATUS_PEND) {
+ strcat(msgline, " [Status-Pending]");
+ }
+
+ strcat(msgline, "\n");
+ sclp_print(msgline);
+
+ msgline[0] = '\0';
+ strcat(msgline, " Device Status :");
+ if (irb->scsw.dstat & SCSW_DSTAT_ATTN) {
+ strcat(msgline, " [Attention]");
+ }
+ if (irb->scsw.dstat & SCSW_DSTAT_STATMOD) {
+ strcat(msgline, " [Status-Modifier]");
+ }
+ if (irb->scsw.dstat & SCSW_DSTAT_CUEND) {
+ strcat(msgline, " [Ctrl-Unit-End]");
+ }
+ if (irb->scsw.dstat & SCSW_DSTAT_BUSY) {
+ strcat(msgline, " [Busy]");
+ }
+ if (irb->scsw.dstat & SCSW_DSTAT_CHEND) {
+ strcat(msgline, " [Channel-End]");
+ }
+ if (irb->scsw.dstat & SCSW_DSTAT_DEVEND) {
+ strcat(msgline, " [Device-End]");
+ }
+ if (irb->scsw.dstat & SCSW_DSTAT_UCHK) {
+ strcat(msgline, " [Unit-Check]");
+ }
+ if (irb->scsw.dstat & SCSW_DSTAT_UEXCP) {
+ strcat(msgline, " [Unit-Exception]");
+ }
+ strcat(msgline, "\n");
+ sclp_print(msgline);
+
+ msgline[0] = '\0';
+ strcat(msgline, " Channel Status :");
+ if (irb->scsw.cstat & SCSW_CSTAT_PCINT) {
+ strcat(msgline, " [Program-Ctrl-Interruption]");
+ }
+ if (irb->scsw.cstat & SCSW_CSTAT_BADLEN) {
+ strcat(msgline, " [Incorrect-Length]");
+ }
+ if (irb->scsw.cstat & SCSW_CSTAT_PROGCHK) {
+ strcat(msgline, " [Program-Check]");
+ }
+ if (irb->scsw.cstat & SCSW_CSTAT_PROTCHK) {
+ strcat(msgline, " [Protection-Check]");
+ }
+ if (irb->scsw.cstat & SCSW_CSTAT_CHDCHK) {
+ strcat(msgline, " [Channel-Data-Check]");
+ }
+ if (irb->scsw.cstat & SCSW_CSTAT_CHCCHK) {
+ strcat(msgline, " [Channel-Ctrl-Check]");
+ }
+ if (irb->scsw.cstat & SCSW_CSTAT_ICCHK) {
+ strcat(msgline, " [Interface-Ctrl-Check]");
+ }
+ if (irb->scsw.cstat & SCSW_CSTAT_CHAINCHK) {
+ strcat(msgline, " [Chaining-Check]");
+ }
+ strcat(msgline, "\n");
+ sclp_print(msgline);
+
+ print_int(" cpa=", irb->scsw.cpa);
+ print_int(" prev_ccw=", prev_ccw);
+ print_int(" this_ccw=", this_ccw);
+}
+
/*
* Handles executing ssch, tsch and returns the irb obtained from tsch.
* Returns 0 on success, -1 if unexpected status pending and we need to retry,
@@ -142,7 +364,7 @@ static int __do_cio(SubChannelId schid, uint32_t ccw_addr, int fmt, Irb *irb)
* cpus are generating or receiving I/O interrupts. So either run it in a
* single-cpu environment or make sure all other cpus are not doing I/O and
* have I/O interrupts masked off. We also assume that only one device is
- * active (generating i/o interrupts).
+ * active (generating i/o interrupts).
*
* Returns non-zero on error.
*/
@@ -180,6 +402,19 @@ int do_cio(SubChannelId schid, uint16_t cutype, uint32_t ccw_addr, int fmt)
continue;
}
+ sclp_print("cio device error\n");
+ print_int(" ssid ", schid.ssid);
+ print_int(" cssid ", schid.cssid);
+ print_int(" sch_no", schid.sch_no);
+ print_int(" ctrl-unit type", cutype);
+ sclp_print("\n");
+ print_irb_err(&irb);
+ if (cutype == CU_TYPE_DASD_3990 || cutype == CU_TYPE_DASD_2107 ||
+ cutype == CU_TYPE_UNKNOWN) {
+ if (!basic_sense(schid, cutype, &sd, sizeof(sd))) {
+ print_eckd_dasd_sense_data(&sd);
+ }
+ }
rc = -1;
break;
}
diff --git a/pc-bios/s390-ccw/libc.h b/pc-bios/s390-ccw/libc.h
index 818517f..bcdc457 100644
--- a/pc-bios/s390-ccw/libc.h
+++ b/pc-bios/s390-ccw/libc.h
@@ -67,6 +67,17 @@ static inline size_t strlen(const char *str)
return i;
}
+static inline char *strcat(char *dest, const char *src)
+{
+ int i;
+ char *dest_end = dest + strlen(dest);
+
+ for (i = 0; i <= strlen(src); i++) {
+ dest_end[i] = src[i];
+ }
+ return dest;
+}
+
static inline int isdigit(int c)
{
return (c >= '0') && (c <= '9');
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 12/15] s390-bios: Refactor virtio to run channel programs via cio
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (10 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 11/15] s390-bios: cio error handling Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 13/15] s390-bios: Use control unit type to determine boot method Jason J. Herne
` (10 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Now that we have a Channel I/O library let's modify virtio boot code to
make use of it for running channel programs.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
---
pc-bios/s390-ccw/virtio.c | 49 +++++++++++++++++++----------------------------
1 file changed, 20 insertions(+), 29 deletions(-)
diff --git a/pc-bios/s390-ccw/virtio.c b/pc-bios/s390-ccw/virtio.c
index aa9da72..4cd09eb 100644
--- a/pc-bios/s390-ccw/virtio.c
+++ b/pc-bios/s390-ccw/virtio.c
@@ -14,6 +14,7 @@
#include "virtio.h"
#include "virtio-scsi.h"
#include "bswap.h"
+#include "helper.h"
#define VRING_WAIT_REPLY_TIMEOUT 30
@@ -89,33 +90,20 @@ int drain_irqs(SubChannelId schid)
}
}
-static int run_ccw(VDev *vdev, int cmd, void *ptr, int len)
+static int run_ccw(VDev *vdev, int cmd, void *ptr, int len, bool sli)
{
Ccw1 ccw = {};
- CmdOrb orb = {};
- int r;
-
- enable_subchannel(vdev->schid);
-
- /* start subchannel command */
- orb.fmt = 1;
- orb.cpa = (u32)(long)&ccw;
- orb.lpm = 0x80;
ccw.cmd_code = cmd;
ccw.cda = (long)ptr;
ccw.count = len;
- r = ssch(vdev->schid, &orb);
- /*
- * XXX Wait until device is done processing the CCW. For now we can
- * assume that a simple tsch will have finished the CCW processing,
- * but the architecture allows for asynchronous operation
- */
- if (!r) {
- r = drain_irqs(vdev->schid);
+ if (sli) {
+ ccw.flags |= CCW_FLAG_SLI;
}
- return r;
+
+ enable_subchannel(vdev->schid);
+ return do_cio(vdev->schid, vdev->senseid.cu_type, ptr2u32(&ccw), CCW_FMT1);
}
static void vring_init(VRing *vr, VqInfo *info)
@@ -257,7 +245,7 @@ void virtio_setup_ccw(VDev *vdev)
vdev->config.blk.blk_size = 0; /* mark "illegal" - setup started... */
vdev->guessed_disk_nature = VIRTIO_GDN_NONE;
- run_ccw(vdev, CCW_CMD_VDEV_RESET, NULL, 0);
+ run_ccw(vdev, CCW_CMD_VDEV_RESET, NULL, 0, false);
switch (vdev->senseid.cu_model) {
case VIRTIO_ID_NET:
@@ -278,18 +266,19 @@ void virtio_setup_ccw(VDev *vdev)
default:
panic("Unsupported virtio device\n");
}
- IPL_assert(run_ccw(vdev, CCW_CMD_READ_CONF, &vdev->config, cfg_size) == 0,
- "Could not get block device configuration");
+ IPL_assert(
+ run_ccw(vdev, CCW_CMD_READ_CONF, &vdev->config, cfg_size, false) == 0,
+ "Could not get block device configuration");
/* Feature negotiation */
for (i = 0; i < ARRAY_SIZE(vdev->guest_features); i++) {
feats.features = 0;
feats.index = i;
- rc = run_ccw(vdev, CCW_CMD_READ_FEAT, &feats, sizeof(feats));
+ rc = run_ccw(vdev, CCW_CMD_READ_FEAT, &feats, sizeof(feats), false);
IPL_assert(rc == 0, "Could not get features bits");
vdev->guest_features[i] &= bswap32(feats.features);
feats.features = bswap32(vdev->guest_features[i]);
- rc = run_ccw(vdev, CCW_CMD_WRITE_FEAT, &feats, sizeof(feats));
+ rc = run_ccw(vdev, CCW_CMD_WRITE_FEAT, &feats, sizeof(feats), false);
IPL_assert(rc == 0, "Could not set features bits");
}
@@ -306,16 +295,17 @@ void virtio_setup_ccw(VDev *vdev)
};
IPL_assert(
- run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config)) == 0,
+ run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config), false) == 0,
"Could not get block device VQ configuration");
info.num = config.num;
vring_init(&vdev->vrings[i], &info);
vdev->vrings[i].schid = vdev->schid;
- IPL_assert(run_ccw(vdev, CCW_CMD_SET_VQ, &info, sizeof(info)) == 0,
- "Cannot set VQ info");
+ IPL_assert(
+ run_ccw(vdev, CCW_CMD_SET_VQ, &info, sizeof(info), false) == 0,
+ "Cannot set VQ info");
}
IPL_assert(
- run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status)) == 0,
+ run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false) == 0,
"Could not write status to host");
}
@@ -324,7 +314,8 @@ bool virtio_is_supported(SubChannelId schid)
vdev.schid = schid;
memset(&vdev.senseid, 0, sizeof(vdev.senseid));
/* run sense id command */
- if (run_ccw(&vdev, CCW_CMD_SENSE_ID, &vdev.senseid, sizeof(vdev.senseid))) {
+ if (run_ccw(&vdev, CCW_CMD_SENSE_ID, &vdev.senseid, sizeof(vdev.senseid),
+ true)) {
return false;
}
if (vdev.senseid.cu_type == 0x3832) {
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 13/15] s390-bios: Use control unit type to determine boot method
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (11 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 12/15] s390-bios: Refactor virtio to run channel programs via cio Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 14/15] s390-bios: Add channel command codes/structs needed for dasd-ipl Jason J. Herne
` (9 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
The boot method is different depending on which device type we are
booting from. Let's examine the control unit type to determine if we're
a virtio device. We'll eventually add a case to check for a real dasd device
here as well.
Since we have to call enable_subchannel() in main now, might as well
remove that call from virtio.c : run_ccw(). This requires adding some
additional enable_subchannel calls to not break calls to
virtio_is_supported().
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
---
pc-bios/s390-ccw/main.c | 16 ++++++++++++++--
pc-bios/s390-ccw/netmain.c | 1 +
pc-bios/s390-ccw/virtio.c | 1 -
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index d3a161c..57a1013 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -76,6 +76,7 @@ static bool find_subch(int dev_no)
/* Skip net devices since no IPLB is created and therefore no
* network bootloader has been loaded
*/
+ enable_subchannel(blk_schid);
if (virtio_is_supported(blk_schid) &&
virtio_get_device_type() == VIRTIO_ID_NET && dev_no < 0) {
continue;
@@ -198,13 +199,24 @@ static void virtio_setup(void)
int main(void)
{
+ uint16_t cutype;
+
sclp_setup();
css_setup();
boot_setup();
find_boot_device();
+ enable_subchannel(blk_schid);
- virtio_setup();
- zipl_load(); /* no return */
+ cutype = cu_type(blk_schid);
+ switch (cutype) {
+ case CU_TYPE_VIRTIO:
+ virtio_setup();
+ zipl_load(); /* no return */
+ break;
+ default:
+ print_int("Attempting to boot from unexpected device type", cutype);
+ panic("");
+ }
panic("Failed to load OS from hard disk\n");
return 0; /* make compiler happy */
diff --git a/pc-bios/s390-ccw/netmain.c b/pc-bios/s390-ccw/netmain.c
index 5189c0f..f3542cb 100644
--- a/pc-bios/s390-ccw/netmain.c
+++ b/pc-bios/s390-ccw/netmain.c
@@ -476,6 +476,7 @@ static bool find_net_dev(Schib *schib, int dev_no)
if (!schib->pmcw.dnv) {
continue;
}
+ enable_subchannel(net_schid);
if (!virtio_is_supported(net_schid)) {
continue;
}
diff --git a/pc-bios/s390-ccw/virtio.c b/pc-bios/s390-ccw/virtio.c
index 4cd09eb..e660c7a 100644
--- a/pc-bios/s390-ccw/virtio.c
+++ b/pc-bios/s390-ccw/virtio.c
@@ -102,7 +102,6 @@ static int run_ccw(VDev *vdev, int cmd, void *ptr, int len, bool sli)
ccw.flags |= CCW_FLAG_SLI;
}
- enable_subchannel(vdev->schid);
return do_cio(vdev->schid, vdev->senseid.cu_type, ptr2u32(&ccw), CCW_FMT1);
}
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 14/15] s390-bios: Add channel command codes/structs needed for dasd-ipl
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (12 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 13/15] s390-bios: Use control unit type to determine boot method Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 15/15] s390-bios: Support booting from real dasd device Jason J. Herne
` (8 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
The dasd IPL procedure needs to execute a few previously unused
channel commands. Let's define them and their associated data
structures.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
---
pc-bios/s390-ccw/cio.h | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/pc-bios/s390-ccw/cio.h b/pc-bios/s390-ccw/cio.h
index 1637e32..aaa432d 100644
--- a/pc-bios/s390-ccw/cio.h
+++ b/pc-bios/s390-ccw/cio.h
@@ -200,11 +200,14 @@ typedef struct ccw1 {
#define CCW_FLAG_IDA 0x04
#define CCW_FLAG_SUSPEND 0x02
+/* Common CCW commands */
+#define CCW_CMD_READ_IPL 0x02
#define CCW_CMD_NOOP 0x03
#define CCW_CMD_BASIC_SENSE 0x04
#define CCW_CMD_TIC 0x08
#define CCW_CMD_SENSE_ID 0xe4
+/* Virtio CCW commands */
#define CCW_CMD_SET_VQ 0x13
#define CCW_CMD_VDEV_RESET 0x33
#define CCW_CMD_READ_FEAT 0x12
@@ -216,6 +219,12 @@ typedef struct ccw1 {
#define CCW_CMD_SET_CONF_IND 0x53
#define CCW_CMD_READ_VQ_CONF 0x32
+/* DASD CCW commands */
+#define CCW_CMD_DASD_READ 0x06
+#define CCW_CMD_DASD_SEEK 0x07
+#define CCW_CMD_DASD_SEARCH_ID_EQ 0x31
+#define CCW_CMD_DASD_READ_MT 0x86
+
/*
* Command-mode operation request block
*/
@@ -333,6 +342,20 @@ typedef struct irb {
__u32 emw[8];
} __attribute__ ((packed, aligned(4))) Irb;
+/* Used for SEEK ccw commands */
+typedef struct CcwSeekData {
+ uint16_t reserved;
+ uint16_t cyl;
+ uint16_t head;
+} __attribute__((packed)) CcwSeekData;
+
+/* Used for SEARCH ID ccw commands */
+typedef struct CcwSearchIdData {
+ uint16_t cyl;
+ uint16_t head;
+ uint8_t record;
+} __attribute__((packed)) CcwSearchIdData;
+
int enable_mss_facility(void);
void enable_subchannel(SubChannelId schid);
uint16_t cu_type(SubChannelId schid);
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Qemu-devel] [PATCH v4 15/15] s390-bios: Support booting from real dasd device
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (13 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 14/15] s390-bios: Add channel command codes/structs needed for dasd-ipl Jason J. Herne
@ 2019-03-11 15:21 ` Jason J. Herne
2019-03-11 15:57 ` [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support no-reply
` (7 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 15:21 UTC (permalink / raw)
To: qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Allows guest to boot from a vfio configured real dasd device.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
---
MAINTAINERS | 1 +
docs/devel/s390-dasd-ipl.txt | 133 +++++++++++++++++++++++
pc-bios/s390-ccw/Makefile | 2 +-
pc-bios/s390-ccw/dasd-ipl.c | 250 +++++++++++++++++++++++++++++++++++++++++++
pc-bios/s390-ccw/dasd-ipl.h | 16 +++
pc-bios/s390-ccw/main.c | 5 +
pc-bios/s390-ccw/s390-arch.h | 13 +++
7 files changed, 419 insertions(+), 1 deletion(-)
create mode 100644 docs/devel/s390-dasd-ipl.txt
create mode 100644 pc-bios/s390-ccw/dasd-ipl.c
create mode 100644 pc-bios/s390-ccw/dasd-ipl.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 4801a48..03152b1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1166,6 +1166,7 @@ S: Supported
F: hw/s390x/ipl.*
F: pc-bios/s390-ccw/
F: pc-bios/s390-ccw.img
+F: docs/devel/s390-dasd-ipl.txt
T: git https://github.com/borntraeger/qemu.git s390-next
L: qemu-s390x@nongnu.org
diff --git a/docs/devel/s390-dasd-ipl.txt b/docs/devel/s390-dasd-ipl.txt
new file mode 100644
index 0000000..236428a
--- /dev/null
+++ b/docs/devel/s390-dasd-ipl.txt
@@ -0,0 +1,133 @@
+*****************************
+***** s390 hardware IPL *****
+*****************************
+
+The s390 hardware IPL process consists of the following steps.
+
+1. A READ IPL ccw is constructed in memory location 0x0.
+ This ccw, by definition, reads the IPL1 record which is located on the disk
+ at cylinder 0 track 0 record 1. Note that the chain flag is on in this ccw
+ so when it is complete another ccw will be fetched and executed from memory
+ location 0x08.
+
+2. Execute the Read IPL ccw at 0x00, thereby reading IPL1 data into 0x00.
+ IPL1 data is 24 bytes in length and consists of the following pieces of
+ information: [psw][read ccw][tic ccw]. When the machine executes the Read
+ IPL ccw it read the 24-bytes of IPL1 to be read into memory starting at
+ location 0x0. Then the ccw program at 0x08 which consists of a read
+ ccw and a tic ccw is automatically executed because of the chain flag from
+ the original READ IPL ccw. The read ccw will read the IPL2 data into memory
+ and the TIC (Tranfer In Channel) will transfer control to the channel
+ program contained in the IPL2 data. The TIC channel command is the
+ equivalent of a branch/jump/goto instruction for channel programs.
+ NOTE: The ccws in IPL1 are defined by the architecture to be format 0.
+
+3. Execute IPL2.
+ The TIC ccw instruction at the end of the IPL1 channel program will begin
+ the execution of the IPL2 channel program. IPL2 is stage-2 of the boot
+ process and will contain a larger channel program than IPL1. The point of
+ IPL2 is to find and load either the operating system or a small program that
+ loads the operating system from disk. At the end of this step all or some of
+ the real operating system is loaded into memory and we are ready to hand
+ control over to the guest operating system. At this point the guest
+ operating system is entirely responsible for loading any more data it might
+ need to function. NOTE: The IPL2 channel program might read data into memory
+ location 0 thereby overwriting the IPL1 psw and channel program. This is ok
+ as long as the data placed in location 0 contains a psw whose instruction
+ address points to the guest operating system code to execute at the end of
+ the IPL/boot process.
+ NOTE: The ccws in IPL2 are defined by the architecture to be format 0.
+
+4. Start executing the guest operating system.
+ The psw that was loaded into memory location 0 as part of the ipl process
+ should contain the needed flags for the operating system we have loaded. The
+ psw's instruction address will point to the location in memory where we want
+ to start executing the operating system. This psw is loaded (via LPSW
+ instruction) causing control to be passed to the operating system code.
+
+In a non-virtualized environment this process, handled entirely by the hardware,
+is kicked off by the user initiating a "Load" procedure from the hardware
+management console. This "Load" procedure crafts a special "Read IPL" ccw in
+memory location 0x0 that reads IPL1. It then executes this ccw thereby kicking
+off the reading of IPL1 data. Since the channel program from IPL1 will be
+written immediately after the special "Read IPL" ccw, the IPL1 channel program
+will be executed immediately (the special read ccw has the chaining bit turned
+on). The TIC at the end of the IPL1 channel program will cause the IPL2 channel
+program to be executed automatically. After this sequence completes the "Load"
+procedure then loads the psw from 0x0.
+
+**********************************************************
+***** How this all pertains to QEMU (and the kernel) *****
+**********************************************************
+
+In theory we should merely have to do the following to IPL/boot a guest
+operating system from a DASD device:
+
+1. Place a "Read IPL" ccw into memory location 0x0 with chaining bit on.
+2. Execute channel program at 0x0.
+3. LPSW 0x0.
+
+However, our emulation of the machine's channel program logic within the kernel
+is missing one key feature that is required for this process to work:
+non-prefetch of ccw data.
+
+When we start a channel program we pass the channel subsystem parameters via an
+ORB (Operation Request Block). One of those parameters is a prefetch bit. If the
+bit is on then the vfio-ccw kernel driver is allowed to read the entire channel
+program from guest memory before it starts executing it. This means that any
+channel commands that read additional channel commands will not work as expected
+because the newly read commands will only exist in guest memory and NOT within
+the kernel's channel subsystem memory. The kernel vfio-ccw driver currently
+requires this bit to be on for all channel programs. This is a problem because
+the IPL process consists of transferring control from the "Read IPL" ccw
+immediately to the IPL1 channel program that was read by "Read IPL".
+
+Not being able to turn off prefetch will also prevent the TIC at the end of the
+IPL1 channel program from transferring control to the IPL2 channel program.
+
+Lastly, in some cases (the zipl bootloader for example) the IPL2 program also
+tansfers control to another channel program segment immediately after reading it
+from the disk. So we need to be able to handle this case.
+
+**************************
+***** What QEMU does *****
+**************************
+
+Since we are forced to live with prefetch we cannot use the very simple IPL
+procedure we defined in the preceding section. So we compensate by doing the
+following.
+
+1. Place "Read IPL" ccw into memory location 0x0, but turn off chaining bit.
+2. Execute "Read IPL" at 0x0.
+
+ So now IPL1's psw is at 0x0 and IPL1's channel program is at 0x08.
+
+4. Write a custom channel program that will seek to the IPL2 record and then
+ execute the READ and TIC ccws from IPL1. Normamly the seek is not required
+ because after reading the IPL1 record the disk is automatically positioned
+ to read the very next record which will be IPL2. But since we are not reading
+ both IPL1 and IPL2 as part of the same channel program we must manually set
+ the position.
+
+5. Grab the target address of the TIC instruction from the IPL1 channel program.
+ This address is where the IPL2 channel program starts.
+
+ Now IPL2 is loaded into memory somewhere, and we know the address.
+
+6. Execute the IPL2 channel program at the address obtained in step #5.
+
+ Because this channel program can be dynamic, we must use a special algorithm
+ that detects a READ immediately followed by a TIC and breaks the ccw chain
+ by turning off the chain bit in the READ ccw. When control is returned from
+ the kernel/hardware to the QEMU bios code we immediately issue another start
+ subchannel to execute the remaining TIC instruction. This causes the entire
+ channel program (starting from the TIC) and all needed data to be refetched
+ thereby stepping around the limitation that would otherwise prevent this
+ channel program from executing properly.
+
+ Now the operating system code is loaded somewhere in guest memory and the psw
+ in memory location 0x0 will point to entry code for the guest operating
+ system.
+
+7. LPSW 0x0.
+ LPSW transfers control to the guest operating system and we're done.
diff --git a/pc-bios/s390-ccw/Makefile b/pc-bios/s390-ccw/Makefile
index 12ad9c1..a048b6b 100644
--- a/pc-bios/s390-ccw/Makefile
+++ b/pc-bios/s390-ccw/Makefile
@@ -10,7 +10,7 @@ $(call set-vpath, $(SRC_PATH)/pc-bios/s390-ccw)
.PHONY : all clean build-all
OBJECTS = start.o main.o bootmap.o jump2ipl.o sclp.o menu.o \
- virtio.o virtio-scsi.o virtio-blkdev.o libc.o cio.o
+ virtio.o virtio-scsi.o virtio-blkdev.o libc.o cio.o dasd-ipl.o
QEMU_CFLAGS := $(filter -W%, $(QEMU_CFLAGS))
QEMU_CFLAGS += -ffreestanding -fno-delete-null-pointer-checks -msoft-float
diff --git a/pc-bios/s390-ccw/dasd-ipl.c b/pc-bios/s390-ccw/dasd-ipl.c
new file mode 100644
index 0000000..42b61d2
--- /dev/null
+++ b/pc-bios/s390-ccw/dasd-ipl.c
@@ -0,0 +1,250 @@
+/*
+ * S390 IPL (boot) from a real DASD device via vfio framework.
+ *
+ * Copyright (c) 2019 Jason J. Herne <jjherne@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#include "libc.h"
+#include "s390-ccw.h"
+#include "s390-arch.h"
+#include "dasd-ipl.h"
+#include "helper.h"
+
+static char prefix_page[PAGE_SIZE * 2]
+ __attribute__((__aligned__(PAGE_SIZE * 2)));
+
+static void enable_prefixing(void)
+{
+ memcpy(&prefix_page, (void *)0, 4096);
+ set_prefix(ptr2u32(&prefix_page));
+}
+
+static void disable_prefixing(void)
+{
+ set_prefix(0);
+ /* Copy io interrupt info back to low core */
+ memcpy((void *)0xB8, prefix_page + 0xB8, 12);
+}
+
+static bool is_read_tic_ccw_chain(Ccw0 *ccw)
+{
+ Ccw0 *next_ccw = ccw + 1;
+
+ return ((ccw->cmd_code == CCW_CMD_DASD_READ ||
+ ccw->cmd_code == CCW_CMD_DASD_READ_MT) &&
+ ccw->chain && next_ccw->cmd_code == CCW_CMD_TIC);
+}
+
+static bool dynamic_cp_fixup(uint32_t ccw_addr, uint32_t *next_cpa)
+{
+ Ccw0 *cur_ccw = (Ccw0 *)(uint64_t)ccw_addr;
+ Ccw0 *tic_ccw;
+
+ while (true) {
+ /* Skip over inline TIC (it might not have the chain bit on) */
+ if (cur_ccw->cmd_code == CCW_CMD_TIC &&
+ cur_ccw->cda == ptr2u32(cur_ccw) - 8) {
+ cur_ccw += 1;
+ continue;
+ }
+
+ if (!cur_ccw->chain) {
+ break;
+ }
+ if (is_read_tic_ccw_chain(cur_ccw)) {
+ /*
+ * Breaking a chain of CCWs may alter the semantics or even the
+ * validity of a channel program. The heuristic implemented below
+ * seems to work well in practice for the channel programs
+ * generated by zipl.
+ */
+ tic_ccw = cur_ccw + 1;
+ *next_cpa = tic_ccw->cda;
+ cur_ccw->chain = 0;
+ return true;
+ }
+ cur_ccw += 1;
+ }
+ return false;
+}
+
+static int run_dynamic_ccw_program(SubChannelId schid, uint16_t cutype,
+ uint32_t cpa)
+{
+ bool has_next;
+ uint32_t next_cpa = 0;
+ int rc;
+
+ do {
+ has_next = dynamic_cp_fixup(cpa, &next_cpa);
+
+ print_int("executing ccw chain at ", cpa);
+ enable_prefixing();
+ rc = do_cio(schid, cutype, cpa, CCW_FMT0);
+ disable_prefixing();
+
+ if (rc) {
+ break;
+ }
+ cpa = next_cpa;
+ } while (has_next);
+
+ return rc;
+}
+
+static void make_readipl(void)
+{
+ Ccw0 *ccwIplRead = (Ccw0 *)0x00;
+
+ /* Create Read IPL ccw at address 0 */
+ ccwIplRead->cmd_code = CCW_CMD_READ_IPL;
+ ccwIplRead->cda = 0x00; /* Read into address 0x00 in main memory */
+ ccwIplRead->chain = 0; /* Chain flag */
+ ccwIplRead->count = 0x18; /* Read 0x18 bytes of data */
+}
+
+static void run_readipl(SubChannelId schid, uint16_t cutype)
+{
+ if (do_cio(schid, cutype, 0x00, CCW_FMT0)) {
+ panic("dasd-ipl: Failed to run Read IPL channel program");
+ }
+}
+
+/*
+ * The architecture states that IPL1 data should consist of a psw followed by
+ * format-0 READ and TIC CCWs. Let's sanity check.
+ */
+static void check_ipl1(void)
+{
+ Ccw0 *ccwread = (Ccw0 *)0x08;
+ Ccw0 *ccwtic = (Ccw0 *)0x10;
+
+ if (ccwread->cmd_code != CCW_CMD_DASD_READ ||
+ ccwtic->cmd_code != CCW_CMD_TIC) {
+ panic("dasd-ipl: IPL1 data invalid. Is this disk really bootable?\n");
+ }
+}
+
+static void check_ipl2(uint32_t ipl2_addr)
+{
+ Ccw0 *ccw = u32toptr(ipl2_addr);
+
+ if (ipl2_addr == 0x00) {
+ panic("IPL2 address invalid. Is this disk really bootable?\n");
+ }
+ if (ccw->cmd_code == 0x00) {
+ panic("IPL2 ccw data invalid. Is this disk really bootable?\n");
+ }
+}
+
+static uint32_t read_ipl2_addr(void)
+{
+ Ccw0 *ccwtic = (Ccw0 *)0x10;
+
+ return ccwtic->cda;
+}
+
+static void ipl1_fixup(void)
+{
+ Ccw0 *ccwSeek = (Ccw0 *) 0x08;
+ Ccw0 *ccwSearchID = (Ccw0 *) 0x10;
+ Ccw0 *ccwSearchTic = (Ccw0 *) 0x18;
+ Ccw0 *ccwRead = (Ccw0 *) 0x20;
+ CcwSeekData *seekData = (CcwSeekData *) 0x30;
+ CcwSearchIdData *searchData = (CcwSearchIdData *) 0x38;
+
+ /* move IPL1 CCWs to make room for CCWs needed to locate record 2 */
+ memcpy(ccwRead, (void *)0x08, 16);
+
+ /* Disable chaining so we don't TIC to IPL2 channel program */
+ ccwRead->chain = 0x00;
+
+ ccwSeek->cmd_code = CCW_CMD_DASD_SEEK;
+ ccwSeek->cda = ptr2u32(seekData);
+ ccwSeek->chain = 1;
+ ccwSeek->count = sizeof(*seekData);
+ seekData->reserved = 0x00;
+ seekData->cyl = 0x00;
+ seekData->head = 0x00;
+
+ ccwSearchID->cmd_code = CCW_CMD_DASD_SEARCH_ID_EQ;
+ ccwSearchID->cda = ptr2u32(searchData);
+ ccwSearchID->chain = 1;
+ ccwSearchID->count = sizeof(*searchData);
+ searchData->cyl = 0;
+ searchData->head = 0;
+ searchData->record = 2;
+
+ /* Go back to Search CCW if correct record not yet found */
+ ccwSearchTic->cmd_code = CCW_CMD_TIC;
+ ccwSearchTic->cda = ptr2u32(ccwSearchID);
+}
+
+static void run_ipl1(SubChannelId schid, uint16_t cutype)
+ {
+ uint32_t startAddr = 0x08;
+
+ if (do_cio(schid, cutype, startAddr, CCW_FMT0)) {
+ panic("dasd-ipl: Failed to run IPL1 channel program");
+ }
+}
+
+static void run_ipl2(SubChannelId schid, uint16_t cutype, uint32_t addr)
+{
+
+ if (run_dynamic_ccw_program(schid, cutype, addr)) {
+ panic("dasd-ipl: Failed to run IPL2 channel program");
+ }
+}
+
+static void lpsw(void *psw_addr)
+{
+ PSWLegacy *pswl = (PSWLegacy *) psw_addr;
+
+ pswl->mask |= PSW_MASK_EAMODE; /* Force z-mode */
+ pswl->addr |= PSW_MASK_BAMODE;
+ asm volatile(" llgtr 0,0\n llgtr 1,1\n" /* Some OS's expect to be */
+ " llgtr 2,2\n llgtr 3,3\n" /* in 32-bit mode. Clear */
+ " llgtr 4,4\n llgtr 5,5\n" /* high part of regs to */
+ " llgtr 6,6\n llgtr 7,7\n" /* avoid messing up */
+ " llgtr 8,8\n llgtr 9,9\n" /* instructions that work */
+ " llgtr 10,10\n llgtr 11,11\n" /* in both addressing */
+ " llgtr 12,12\n llgtr 13,13\n" /* modes, like servc. */
+ " llgtr 14,14\n llgtr 15,15\n"
+ " lpsw %0\n"
+ : : "Q" (*pswl) : "cc");
+}
+
+/*
+ * Limitations in vfio-ccw support complicate the IPL process. Details can
+ * be found in docs/devel/s390-dasd-ipl.txt
+ */
+void dasd_ipl(SubChannelId schid, uint16_t cutype)
+{
+ uint32_t ipl2_addr;
+
+ /* Construct Read IPL CCW and run it to read IPL1 from boot disk */
+ make_readipl();
+ run_readipl(schid, cutype);
+ ipl2_addr = read_ipl2_addr();
+ check_ipl1();
+
+ /*
+ * Fixup IPL1 channel program to account for vfio-ccw limitations, then run
+ * it to read IPL2 channel program from boot disk.
+ */
+ ipl1_fixup();
+ run_ipl1(schid, cutype);
+ check_ipl2(ipl2_addr);
+
+ /*
+ * Run IPL2 channel program to read operating system code from boot disk
+ * then transfer control to the guest operating system
+ */
+ run_ipl2(schid, cutype, ipl2_addr);
+ lpsw(0);
+}
diff --git a/pc-bios/s390-ccw/dasd-ipl.h b/pc-bios/s390-ccw/dasd-ipl.h
new file mode 100644
index 0000000..c394828
--- /dev/null
+++ b/pc-bios/s390-ccw/dasd-ipl.h
@@ -0,0 +1,16 @@
+/*
+ * S390 IPL (boot) from a real DASD device via vfio framework.
+ *
+ * Copyright (c) 2019 Jason J. Herne <jjherne@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#ifndef DASD_IPL_H
+#define DASD_IPL_H
+
+void dasd_ipl(SubChannelId schid, uint16_t cutype);
+
+#endif /* DASD_IPL_H */
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 57a1013..3c449ad 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -13,6 +13,7 @@
#include "s390-ccw.h"
#include "cio.h"
#include "virtio.h"
+#include "dasd-ipl.h"
char stack[PAGE_SIZE * 8] __attribute__((__aligned__(PAGE_SIZE)));
static SubChannelId blk_schid = { .one = 1 };
@@ -209,6 +210,10 @@ int main(void)
cutype = cu_type(blk_schid);
switch (cutype) {
+ case CU_TYPE_DASD_3990:
+ case CU_TYPE_DASD_2107:
+ dasd_ipl(blk_schid, cutype); /* no return */
+ break;
case CU_TYPE_VIRTIO:
virtio_setup();
zipl_load(); /* no return */
diff --git a/pc-bios/s390-ccw/s390-arch.h b/pc-bios/s390-ccw/s390-arch.h
index 5e92c7a..504fc7c 100644
--- a/pc-bios/s390-ccw/s390-arch.h
+++ b/pc-bios/s390-ccw/s390-arch.h
@@ -87,4 +87,17 @@ typedef struct LowCore {
extern LowCore const *lowcore;
+static inline void set_prefix(uint32_t address)
+{
+ asm volatile("spx %0" : : "m" (address) : "memory");
+}
+
+static inline uint32_t store_prefix(void)
+{
+ uint32_t address;
+
+ asm volatile("stpx %0" : "=m" (address));
+ return address;
+}
+
#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (14 preceding siblings ...)
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 15/15] s390-bios: Support booting from real dasd device Jason J. Herne
@ 2019-03-11 15:57 ` no-reply
2019-03-11 16:11 ` no-reply
` (6 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: no-reply @ 2019-03-11 15:57 UTC (permalink / raw)
To: jjherne
Cc: fam, qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Patchew URL: https://patchew.org/QEMU/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Subject: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com -> patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Switched to a new branch 'test'
bd94e50234 s390-bios: Support booting from real dasd device
aad5bf130c s390-bios: Add channel command codes/structs needed for dasd-ipl
e258b66057 s390-bios: Use control unit type to determine boot method
cc8935297c s390-bios: Refactor virtio to run channel programs via cio
7bdaffbf3f s390-bios: cio error handling
5f3bd7198d s390-bios: Support for running format-0/1 channel programs
eb2acc2e8a s390-bios: ptr2u32 and u32toptr
0e981d74ac s390-bios: Map low core memory
f059965201 s390-bios: Decouple channel i/o logic from virtio
7fc7e860d1 s390-bios: Clean up cio.h
4e4ed7410e s390-bios: Factor finding boot device out of virtio code path
7d0cb3a7d8 s390-bios: Extend find_dev() for non-virtio devices
c716ab8964 s390-bios: decouple common boot logic from virtio
de40d8226e s390-bios: decouple cio setup from virtio
832381495b s390 vfio-ccw: Add bootindex property and IPLB data
=== OUTPUT BEGIN ===
1/15 Checking commit 832381495ba0 (s390 vfio-ccw: Add bootindex property and IPLB data)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#220:
new file mode 100644
total: 0 errors, 1 warnings, 199 lines checked
Patch 1/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/15 Checking commit de40d8226eed (s390-bios: decouple cio setup from virtio)
3/15 Checking commit c716ab896424 (s390-bios: decouple common boot logic from virtio)
ERROR: externs should be avoided in .c files
#31: FILE: pc-bios/s390-ccw/main.c:19:
+IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
total: 1 errors, 0 warnings, 65 lines checked
Patch 3/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
4/15 Checking commit 7d0cb3a7d837 (s390-bios: Extend find_dev() for non-virtio devices)
5/15 Checking commit 4e4ed7410ed2 (s390-bios: Factor finding boot device out of virtio code path)
6/15 Checking commit 7fc7e860d1a8 (s390-bios: Clean up cio.h)
7/15 Checking commit f05996520135 (s390-bios: Decouple channel i/o logic from virtio)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#28:
new file mode 100644
total: 0 errors, 1 warnings, 123 lines checked
Patch 7/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
8/15 Checking commit 0e981d74ac1d (s390-bios: Map low core memory)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#36:
new file mode 100644
total: 0 errors, 1 warnings, 104 lines checked
Patch 8/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
9/15 Checking commit eb2acc2e8abf (s390-bios: ptr2u32 and u32toptr)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#17:
new file mode 100644
total: 0 errors, 1 warnings, 31 lines checked
Patch 9/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/15 Checking commit 5f3bd7198d22 (s390-bios: Support for running format-0/1 channel programs)
ERROR: trailing whitespace
#137: FILE: pc-bios/s390-ccw/cio.c:145:
+ * active (generating i/o interrupts). $
total: 1 errors, 0 warnings, 375 lines checked
Patch 10/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
11/15 Checking commit 7bdaffbf3f39 (s390-bios: cio error handling)
12/15 Checking commit cc8935297cb1 (s390-bios: Refactor virtio to run channel programs via cio)
WARNING: line over 80 characters
#103: FILE: pc-bios/s390-ccw/virtio.c:298:
+ run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config), false) == 0,
WARNING: line over 80 characters
#116: FILE: pc-bios/s390-ccw/virtio.c:308:
+ run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false) == 0,
total: 0 errors, 2 warnings, 107 lines checked
Patch 12/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
13/15 Checking commit e258b660570b (s390-bios: Use control unit type to determine boot method)
14/15 Checking commit aad5bf130c00 (s390-bios: Add channel command codes/structs needed for dasd-ipl)
15/15 Checking commit bd94e50234c5 (s390-bios: Support booting from real dasd device)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#26:
new file mode 100644
total: 0 errors, 1 warnings, 448 lines checked
Patch 15/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (15 preceding siblings ...)
2019-03-11 15:57 ` [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support no-reply
@ 2019-03-11 16:11 ` no-reply
2019-03-11 16:16 ` no-reply
` (5 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: no-reply @ 2019-03-11 16:11 UTC (permalink / raw)
To: jjherne
Cc: fam, qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Patchew URL: https://patchew.org/QEMU/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Subject: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
t [tag update] patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com -> patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Switched to a new branch 'test'
ea96f08482 s390-bios: Support booting from real dasd device
ab7d59e218 s390-bios: Add channel command codes/structs needed for dasd-ipl
2ad6920563 s390-bios: Use control unit type to determine boot method
c1dd91dcab s390-bios: Refactor virtio to run channel programs via cio
783a5d992e s390-bios: cio error handling
ed5a01a4d1 s390-bios: Support for running format-0/1 channel programs
ce04b580ff s390-bios: ptr2u32 and u32toptr
d0bf9e13e4 s390-bios: Map low core memory
bef31e545b s390-bios: Decouple channel i/o logic from virtio
9d517b7d84 s390-bios: Clean up cio.h
19fba0fd56 s390-bios: Factor finding boot device out of virtio code path
6c0daf90e7 s390-bios: Extend find_dev() for non-virtio devices
a500db9f58 s390-bios: decouple common boot logic from virtio
1a8b1f01ab s390-bios: decouple cio setup from virtio
22aef1c027 s390 vfio-ccw: Add bootindex property and IPLB data
=== OUTPUT BEGIN ===
1/15 Checking commit 22aef1c02747 (s390 vfio-ccw: Add bootindex property and IPLB data)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#220:
new file mode 100644
total: 0 errors, 1 warnings, 199 lines checked
Patch 1/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/15 Checking commit 1a8b1f01abf8 (s390-bios: decouple cio setup from virtio)
3/15 Checking commit a500db9f58bc (s390-bios: decouple common boot logic from virtio)
ERROR: externs should be avoided in .c files
#31: FILE: pc-bios/s390-ccw/main.c:19:
+IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
total: 1 errors, 0 warnings, 65 lines checked
Patch 3/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
4/15 Checking commit 6c0daf90e7a2 (s390-bios: Extend find_dev() for non-virtio devices)
5/15 Checking commit 19fba0fd568a (s390-bios: Factor finding boot device out of virtio code path)
6/15 Checking commit 9d517b7d847e (s390-bios: Clean up cio.h)
7/15 Checking commit bef31e545b82 (s390-bios: Decouple channel i/o logic from virtio)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#28:
new file mode 100644
total: 0 errors, 1 warnings, 123 lines checked
Patch 7/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
8/15 Checking commit d0bf9e13e4f2 (s390-bios: Map low core memory)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#36:
new file mode 100644
total: 0 errors, 1 warnings, 104 lines checked
Patch 8/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
9/15 Checking commit ce04b580ff16 (s390-bios: ptr2u32 and u32toptr)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#17:
new file mode 100644
total: 0 errors, 1 warnings, 31 lines checked
Patch 9/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/15 Checking commit ed5a01a4d1bb (s390-bios: Support for running format-0/1 channel programs)
ERROR: trailing whitespace
#137: FILE: pc-bios/s390-ccw/cio.c:145:
+ * active (generating i/o interrupts). $
total: 1 errors, 0 warnings, 375 lines checked
Patch 10/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
11/15 Checking commit 783a5d992e32 (s390-bios: cio error handling)
12/15 Checking commit c1dd91dcabf5 (s390-bios: Refactor virtio to run channel programs via cio)
WARNING: line over 80 characters
#103: FILE: pc-bios/s390-ccw/virtio.c:298:
+ run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config), false) == 0,
WARNING: line over 80 characters
#116: FILE: pc-bios/s390-ccw/virtio.c:308:
+ run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false) == 0,
total: 0 errors, 2 warnings, 107 lines checked
Patch 12/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
13/15 Checking commit 2ad69205637b (s390-bios: Use control unit type to determine boot method)
14/15 Checking commit ab7d59e21880 (s390-bios: Add channel command codes/structs needed for dasd-ipl)
15/15 Checking commit ea96f08482fb (s390-bios: Support booting from real dasd device)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#26:
new file mode 100644
total: 0 errors, 1 warnings, 448 lines checked
Patch 15/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (16 preceding siblings ...)
2019-03-11 16:11 ` no-reply
@ 2019-03-11 16:16 ` no-reply
2019-03-11 16:20 ` no-reply
` (4 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: no-reply @ 2019-03-11 16:16 UTC (permalink / raw)
To: jjherne
Cc: fam, qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Patchew URL: https://patchew.org/QEMU/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Subject: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
t [tag update] patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com -> patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Switched to a new branch 'test'
fc8f35f68b s390-bios: Support booting from real dasd device
cc8f9b9582 s390-bios: Add channel command codes/structs needed for dasd-ipl
b29dbdc21e s390-bios: Use control unit type to determine boot method
302635f2b0 s390-bios: Refactor virtio to run channel programs via cio
d97780d732 s390-bios: cio error handling
4d96946c21 s390-bios: Support for running format-0/1 channel programs
f46e7a874b s390-bios: ptr2u32 and u32toptr
fa38f7e829 s390-bios: Map low core memory
d8b568caf7 s390-bios: Decouple channel i/o logic from virtio
a25758c37b s390-bios: Clean up cio.h
eba9c2f352 s390-bios: Factor finding boot device out of virtio code path
0b7c5d9020 s390-bios: Extend find_dev() for non-virtio devices
6da07615a3 s390-bios: decouple common boot logic from virtio
c09f8e28ca s390-bios: decouple cio setup from virtio
8289560b25 s390 vfio-ccw: Add bootindex property and IPLB data
=== OUTPUT BEGIN ===
1/15 Checking commit 8289560b250a (s390 vfio-ccw: Add bootindex property and IPLB data)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#220:
new file mode 100644
total: 0 errors, 1 warnings, 199 lines checked
Patch 1/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/15 Checking commit c09f8e28ca6a (s390-bios: decouple cio setup from virtio)
3/15 Checking commit 6da07615a32e (s390-bios: decouple common boot logic from virtio)
ERROR: externs should be avoided in .c files
#31: FILE: pc-bios/s390-ccw/main.c:19:
+IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
total: 1 errors, 0 warnings, 65 lines checked
Patch 3/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
4/15 Checking commit 0b7c5d90207b (s390-bios: Extend find_dev() for non-virtio devices)
5/15 Checking commit eba9c2f35241 (s390-bios: Factor finding boot device out of virtio code path)
6/15 Checking commit a25758c37b49 (s390-bios: Clean up cio.h)
7/15 Checking commit d8b568caf728 (s390-bios: Decouple channel i/o logic from virtio)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#28:
new file mode 100644
total: 0 errors, 1 warnings, 123 lines checked
Patch 7/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
8/15 Checking commit fa38f7e82947 (s390-bios: Map low core memory)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#36:
new file mode 100644
total: 0 errors, 1 warnings, 104 lines checked
Patch 8/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
9/15 Checking commit f46e7a874b6c (s390-bios: ptr2u32 and u32toptr)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#17:
new file mode 100644
total: 0 errors, 1 warnings, 31 lines checked
Patch 9/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/15 Checking commit 4d96946c21d4 (s390-bios: Support for running format-0/1 channel programs)
ERROR: trailing whitespace
#137: FILE: pc-bios/s390-ccw/cio.c:145:
+ * active (generating i/o interrupts). $
total: 1 errors, 0 warnings, 375 lines checked
Patch 10/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
11/15 Checking commit d97780d73213 (s390-bios: cio error handling)
12/15 Checking commit 302635f2b0b1 (s390-bios: Refactor virtio to run channel programs via cio)
WARNING: line over 80 characters
#103: FILE: pc-bios/s390-ccw/virtio.c:298:
+ run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config), false) == 0,
WARNING: line over 80 characters
#116: FILE: pc-bios/s390-ccw/virtio.c:308:
+ run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false) == 0,
total: 0 errors, 2 warnings, 107 lines checked
Patch 12/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
13/15 Checking commit b29dbdc21e67 (s390-bios: Use control unit type to determine boot method)
14/15 Checking commit cc8f9b958217 (s390-bios: Add channel command codes/structs needed for dasd-ipl)
15/15 Checking commit fc8f35f68b0a (s390-bios: Support booting from real dasd device)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#26:
new file mode 100644
total: 0 errors, 1 warnings, 448 lines checked
Patch 15/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (17 preceding siblings ...)
2019-03-11 16:16 ` no-reply
@ 2019-03-11 16:20 ` no-reply
2019-03-11 16:24 ` no-reply
` (3 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: no-reply @ 2019-03-11 16:20 UTC (permalink / raw)
To: jjherne
Cc: fam, qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Patchew URL: https://patchew.org/QEMU/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Subject: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
t [tag update] patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com -> patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Switched to a new branch 'test'
38160b4042 s390-bios: Support booting from real dasd device
316515709f s390-bios: Add channel command codes/structs needed for dasd-ipl
cb625acff9 s390-bios: Use control unit type to determine boot method
e0cf56f04f s390-bios: Refactor virtio to run channel programs via cio
50a001e04d s390-bios: cio error handling
8be89d08ab s390-bios: Support for running format-0/1 channel programs
c4bd8ffe51 s390-bios: ptr2u32 and u32toptr
8ba6f9783a s390-bios: Map low core memory
c2be0a3e0d s390-bios: Decouple channel i/o logic from virtio
02e12ec27b s390-bios: Clean up cio.h
ba01d1cded s390-bios: Factor finding boot device out of virtio code path
bff0b93ce8 s390-bios: Extend find_dev() for non-virtio devices
6b9542b07a s390-bios: decouple common boot logic from virtio
1b23a9248e s390-bios: decouple cio setup from virtio
eaef648c5f s390 vfio-ccw: Add bootindex property and IPLB data
=== OUTPUT BEGIN ===
1/15 Checking commit eaef648c5ffe (s390 vfio-ccw: Add bootindex property and IPLB data)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#220:
new file mode 100644
total: 0 errors, 1 warnings, 199 lines checked
Patch 1/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/15 Checking commit 1b23a9248e2c (s390-bios: decouple cio setup from virtio)
3/15 Checking commit 6b9542b07a35 (s390-bios: decouple common boot logic from virtio)
ERROR: externs should be avoided in .c files
#31: FILE: pc-bios/s390-ccw/main.c:19:
+IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
total: 1 errors, 0 warnings, 65 lines checked
Patch 3/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
4/15 Checking commit bff0b93ce80d (s390-bios: Extend find_dev() for non-virtio devices)
5/15 Checking commit ba01d1cdeda4 (s390-bios: Factor finding boot device out of virtio code path)
6/15 Checking commit 02e12ec27b64 (s390-bios: Clean up cio.h)
7/15 Checking commit c2be0a3e0d87 (s390-bios: Decouple channel i/o logic from virtio)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#28:
new file mode 100644
total: 0 errors, 1 warnings, 123 lines checked
Patch 7/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
8/15 Checking commit 8ba6f9783a0d (s390-bios: Map low core memory)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#36:
new file mode 100644
total: 0 errors, 1 warnings, 104 lines checked
Patch 8/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
9/15 Checking commit c4bd8ffe510b (s390-bios: ptr2u32 and u32toptr)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#17:
new file mode 100644
total: 0 errors, 1 warnings, 31 lines checked
Patch 9/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/15 Checking commit 8be89d08ab08 (s390-bios: Support for running format-0/1 channel programs)
ERROR: trailing whitespace
#137: FILE: pc-bios/s390-ccw/cio.c:145:
+ * active (generating i/o interrupts). $
total: 1 errors, 0 warnings, 375 lines checked
Patch 10/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
11/15 Checking commit 50a001e04daa (s390-bios: cio error handling)
12/15 Checking commit e0cf56f04fb1 (s390-bios: Refactor virtio to run channel programs via cio)
WARNING: line over 80 characters
#103: FILE: pc-bios/s390-ccw/virtio.c:298:
+ run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config), false) == 0,
WARNING: line over 80 characters
#116: FILE: pc-bios/s390-ccw/virtio.c:308:
+ run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false) == 0,
total: 0 errors, 2 warnings, 107 lines checked
Patch 12/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
13/15 Checking commit cb625acff93d (s390-bios: Use control unit type to determine boot method)
14/15 Checking commit 316515709f62 (s390-bios: Add channel command codes/structs needed for dasd-ipl)
15/15 Checking commit 38160b404298 (s390-bios: Support booting from real dasd device)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#26:
new file mode 100644
total: 0 errors, 1 warnings, 448 lines checked
Patch 15/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (18 preceding siblings ...)
2019-03-11 16:20 ` no-reply
@ 2019-03-11 16:24 ` no-reply
2019-03-11 16:29 ` no-reply
` (2 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: no-reply @ 2019-03-11 16:24 UTC (permalink / raw)
To: jjherne
Cc: fam, qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Patchew URL: https://patchew.org/QEMU/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Subject: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
t [tag update] patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com -> patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Switched to a new branch 'test'
74e39a4097 s390-bios: Support booting from real dasd device
6d452a448d s390-bios: Add channel command codes/structs needed for dasd-ipl
cb492caa6c s390-bios: Use control unit type to determine boot method
0620776b87 s390-bios: Refactor virtio to run channel programs via cio
4558a4d4c8 s390-bios: cio error handling
e715629662 s390-bios: Support for running format-0/1 channel programs
ba523e4c71 s390-bios: ptr2u32 and u32toptr
0c748e5dae s390-bios: Map low core memory
92ea0fe2d0 s390-bios: Decouple channel i/o logic from virtio
e676252115 s390-bios: Clean up cio.h
a94f87a361 s390-bios: Factor finding boot device out of virtio code path
295fd42af0 s390-bios: Extend find_dev() for non-virtio devices
7a5e64f51e s390-bios: decouple common boot logic from virtio
2fd1205555 s390-bios: decouple cio setup from virtio
4925bc96f1 s390 vfio-ccw: Add bootindex property and IPLB data
=== OUTPUT BEGIN ===
1/15 Checking commit 4925bc96f171 (s390 vfio-ccw: Add bootindex property and IPLB data)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#220:
new file mode 100644
total: 0 errors, 1 warnings, 199 lines checked
Patch 1/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/15 Checking commit 2fd120555517 (s390-bios: decouple cio setup from virtio)
3/15 Checking commit 7a5e64f51ee9 (s390-bios: decouple common boot logic from virtio)
ERROR: externs should be avoided in .c files
#31: FILE: pc-bios/s390-ccw/main.c:19:
+IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
total: 1 errors, 0 warnings, 65 lines checked
Patch 3/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
4/15 Checking commit 295fd42af0bd (s390-bios: Extend find_dev() for non-virtio devices)
5/15 Checking commit a94f87a361cc (s390-bios: Factor finding boot device out of virtio code path)
6/15 Checking commit e676252115d6 (s390-bios: Clean up cio.h)
7/15 Checking commit 92ea0fe2d0b6 (s390-bios: Decouple channel i/o logic from virtio)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#28:
new file mode 100644
total: 0 errors, 1 warnings, 123 lines checked
Patch 7/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
8/15 Checking commit 0c748e5dae63 (s390-bios: Map low core memory)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#36:
new file mode 100644
total: 0 errors, 1 warnings, 104 lines checked
Patch 8/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
9/15 Checking commit ba523e4c71f7 (s390-bios: ptr2u32 and u32toptr)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#17:
new file mode 100644
total: 0 errors, 1 warnings, 31 lines checked
Patch 9/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/15 Checking commit e7156296626a (s390-bios: Support for running format-0/1 channel programs)
ERROR: trailing whitespace
#137: FILE: pc-bios/s390-ccw/cio.c:145:
+ * active (generating i/o interrupts). $
total: 1 errors, 0 warnings, 375 lines checked
Patch 10/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
11/15 Checking commit 4558a4d4c855 (s390-bios: cio error handling)
12/15 Checking commit 0620776b87c4 (s390-bios: Refactor virtio to run channel programs via cio)
WARNING: line over 80 characters
#103: FILE: pc-bios/s390-ccw/virtio.c:298:
+ run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config), false) == 0,
WARNING: line over 80 characters
#116: FILE: pc-bios/s390-ccw/virtio.c:308:
+ run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false) == 0,
total: 0 errors, 2 warnings, 107 lines checked
Patch 12/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
13/15 Checking commit cb492caa6c49 (s390-bios: Use control unit type to determine boot method)
14/15 Checking commit 6d452a448d58 (s390-bios: Add channel command codes/structs needed for dasd-ipl)
15/15 Checking commit 74e39a40972c (s390-bios: Support booting from real dasd device)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#26:
new file mode 100644
total: 0 errors, 1 warnings, 448 lines checked
Patch 15/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (19 preceding siblings ...)
2019-03-11 16:24 ` no-reply
@ 2019-03-11 16:29 ` no-reply
2019-03-11 17:33 ` Cornelia Huck
2019-03-11 17:49 ` no-reply
22 siblings, 0 replies; 27+ messages in thread
From: no-reply @ 2019-03-11 16:29 UTC (permalink / raw)
To: jjherne
Cc: fam, qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Patchew URL: https://patchew.org/QEMU/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Subject: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
79d8b1dc5b..2e35c7738e master -> master
t [tag update] patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com -> patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Switched to a new branch 'test'
ee5930c12b s390-bios: Support booting from real dasd device
5ff6fc17a5 s390-bios: Add channel command codes/structs needed for dasd-ipl
cb041a4b32 s390-bios: Use control unit type to determine boot method
b8416017c4 s390-bios: Refactor virtio to run channel programs via cio
df2ec37e43 s390-bios: cio error handling
63b18eb97b s390-bios: Support for running format-0/1 channel programs
e6900566ed s390-bios: ptr2u32 and u32toptr
9de84fcb45 s390-bios: Map low core memory
5116bdb9e5 s390-bios: Decouple channel i/o logic from virtio
06f7810bbc s390-bios: Clean up cio.h
b488965a0b s390-bios: Factor finding boot device out of virtio code path
509467af29 s390-bios: Extend find_dev() for non-virtio devices
5a2fb35f34 s390-bios: decouple common boot logic from virtio
3a37549e53 s390-bios: decouple cio setup from virtio
959a2b698e s390 vfio-ccw: Add bootindex property and IPLB data
=== OUTPUT BEGIN ===
1/15 Checking commit 959a2b698e70 (s390 vfio-ccw: Add bootindex property and IPLB data)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#220:
new file mode 100644
total: 0 errors, 1 warnings, 199 lines checked
Patch 1/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/15 Checking commit 3a37549e53cb (s390-bios: decouple cio setup from virtio)
3/15 Checking commit 5a2fb35f34cd (s390-bios: decouple common boot logic from virtio)
ERROR: externs should be avoided in .c files
#31: FILE: pc-bios/s390-ccw/main.c:19:
+IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
total: 1 errors, 0 warnings, 65 lines checked
Patch 3/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
4/15 Checking commit 509467af2963 (s390-bios: Extend find_dev() for non-virtio devices)
5/15 Checking commit b488965a0b21 (s390-bios: Factor finding boot device out of virtio code path)
6/15 Checking commit 06f7810bbc26 (s390-bios: Clean up cio.h)
7/15 Checking commit 5116bdb9e5ab (s390-bios: Decouple channel i/o logic from virtio)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#28:
new file mode 100644
total: 0 errors, 1 warnings, 123 lines checked
Patch 7/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
8/15 Checking commit 9de84fcb45af (s390-bios: Map low core memory)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#36:
new file mode 100644
total: 0 errors, 1 warnings, 104 lines checked
Patch 8/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
9/15 Checking commit e6900566edda (s390-bios: ptr2u32 and u32toptr)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#17:
new file mode 100644
total: 0 errors, 1 warnings, 31 lines checked
Patch 9/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/15 Checking commit 63b18eb97b3d (s390-bios: Support for running format-0/1 channel programs)
ERROR: trailing whitespace
#137: FILE: pc-bios/s390-ccw/cio.c:145:
+ * active (generating i/o interrupts). $
total: 1 errors, 0 warnings, 375 lines checked
Patch 10/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
11/15 Checking commit df2ec37e43e8 (s390-bios: cio error handling)
12/15 Checking commit b8416017c4b3 (s390-bios: Refactor virtio to run channel programs via cio)
WARNING: line over 80 characters
#103: FILE: pc-bios/s390-ccw/virtio.c:298:
+ run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config), false) == 0,
WARNING: line over 80 characters
#116: FILE: pc-bios/s390-ccw/virtio.c:308:
+ run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false) == 0,
total: 0 errors, 2 warnings, 107 lines checked
Patch 12/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
13/15 Checking commit cb041a4b3249 (s390-bios: Use control unit type to determine boot method)
14/15 Checking commit 5ff6fc17a5ea (s390-bios: Add channel command codes/structs needed for dasd-ipl)
15/15 Checking commit ee5930c12b96 (s390-bios: Support booting from real dasd device)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#26:
new file mode 100644
total: 0 errors, 1 warnings, 448 lines checked
Patch 15/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (20 preceding siblings ...)
2019-03-11 16:29 ` no-reply
@ 2019-03-11 17:33 ` Cornelia Huck
2019-03-11 17:35 ` Jason J. Herne
2019-03-11 17:49 ` no-reply
22 siblings, 1 reply; 27+ messages in thread
From: Cornelia Huck @ 2019-03-11 17:33 UTC (permalink / raw)
To: Jason J. Herne; +Cc: qemu-devel, qemu-s390x, thuth, pasic, alifm, borntraeger
On Mon, 11 Mar 2019 11:21:18 -0400
"Jason J. Herne" <jjherne@linux.ibm.com> wrote:
> This is to support booting from vfio-ccw dasd devices. We basically implement
> the real hardware ipl procedure. This allows for booting Linux guests on
> vfio-ccw devices.
>
> vfio-ccw's channel program prefetch algorithm complicates ipl because most ipl
> channel programs dynamically modify themselves. Details on the ipl process and
> how we worked around this issue can be found in docs/devel/s390-dasd-ipl.txt.
>
> *********************
> NOTE: Newer DASD units which initially present as control unit type 3990 may in
> fact really be 2107. Some operating systems may enable 2107 features for these
> devices thereby making sense id return a control unit type of 2107. I've added
> support for control unit type 2107 so we can ipl from these devices.
> *********************
Ugh. I'd have hoped that would have been recognized as A Bad Idea the
last time we had a design like that...
Does that cu type switch persist over subchannel enable/disable?
Subsystem reset?
>
> Changelog
> ==========
> v4
> 01/16: s390 vfio-ccw: Add bootindex property and IPLB data
> - Adding CCW_DEVTYPE_VIRTIO_NET type.
> - s390_get_ccw_device can now accept a NULL devtype argument
> - Other minor refactors
>
> 06/16: s390-bios: Clean up cio.h
> - Remove whitespace changes to cmd_orb struct
>
> 07/16: s390-bios: Decouple channel i/o logic from virtio
> - Fix copyright line
>
> 08/16: s390-bios: Map low core memory
> - Remove Lowcore entries >= 0x200
> - Repositioned const keywords
>
> 09/16: s390-bios: ptr2u32 and u32toptr
> - Add assert to ensure pointer being converted to u32 is below 32 bits in length
> - Add missing copyright comment
>
> 10/16: s390-bios: Support for running format-0/1 channel programs
> - basic_sense now calls __do_cio instead of do_cio. Further protection from
> infinite recursion.
> - __do_cio now asks for retry for subchannel busy case.
> - Minor fixups to comments and message wording
> - start.S: Formating and register naming cleanups
> - Added CU_TYPE_DASD_2107
>
> 11/16: s390-bios: cio error handling
> - Only print sense data when it is provided
>
> 15/16:
> - Added support for CU_TYPE_DASD_2107
>
> 16/16:
> - Merged with various earlier patches
>
> Jason J. Herne (15):
> s390 vfio-ccw: Add bootindex property and IPLB data
> s390-bios: decouple cio setup from virtio
> s390-bios: decouple common boot logic from virtio
> s390-bios: Extend find_dev() for non-virtio devices
> s390-bios: Factor finding boot device out of virtio code path
> s390-bios: Clean up cio.h
> s390-bios: Decouple channel i/o logic from virtio
> s390-bios: Map low core memory
> s390-bios: ptr2u32 and u32toptr
> s390-bios: Support for running format-0/1 channel programs
> s390-bios: cio error handling
> s390-bios: Refactor virtio to run channel programs via cio
> s390-bios: Use control unit type to determine boot method
> s390-bios: Add channel command codes/structs needed for dasd-ipl
> s390-bios: Support booting from real dasd device
>
> MAINTAINERS | 2 +
> docs/devel/s390-dasd-ipl.txt | 133 ++++++++++++++
> hw/s390x/ipl.c | 61 +++++--
> hw/s390x/s390-ccw.c | 9 +
> hw/vfio/ccw.c | 2 +-
> include/hw/s390x/s390-ccw.h | 1 +
> include/hw/s390x/vfio-ccw.h | 28 +++
> pc-bios/s390-ccw/Makefile | 2 +-
> pc-bios/s390-ccw/cio.c | 423 +++++++++++++++++++++++++++++++++++++++++++
> pc-bios/s390-ccw/cio.h | 270 +++++++++++++++++++++------
> pc-bios/s390-ccw/dasd-ipl.c | 250 +++++++++++++++++++++++++
> pc-bios/s390-ccw/dasd-ipl.h | 16 ++
> pc-bios/s390-ccw/helper.h | 31 ++++
> pc-bios/s390-ccw/libc.h | 11 ++
> pc-bios/s390-ccw/main.c | 161 ++++++++++------
> pc-bios/s390-ccw/netboot.mak | 2 +-
> pc-bios/s390-ccw/netmain.c | 2 +
> pc-bios/s390-ccw/s390-arch.h | 103 +++++++++++
> pc-bios/s390-ccw/s390-ccw.h | 10 +-
> pc-bios/s390-ccw/start.S | 29 +++
> pc-bios/s390-ccw/virtio.c | 73 ++------
> tests/boot-serial-test.c | 2 +-
> 22 files changed, 1425 insertions(+), 196 deletions(-)
> create mode 100644 docs/devel/s390-dasd-ipl.txt
> create mode 100644 include/hw/s390x/vfio-ccw.h
> create mode 100644 pc-bios/s390-ccw/cio.c
> create mode 100644 pc-bios/s390-ccw/dasd-ipl.c
> create mode 100644 pc-bios/s390-ccw/dasd-ipl.h
> create mode 100644 pc-bios/s390-ccw/helper.h
> create mode 100644 pc-bios/s390-ccw/s390-arch.h
>
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
2019-03-11 17:33 ` Cornelia Huck
@ 2019-03-11 17:35 ` Jason J. Herne
0 siblings, 0 replies; 27+ messages in thread
From: Jason J. Herne @ 2019-03-11 17:35 UTC (permalink / raw)
To: Cornelia Huck; +Cc: qemu-devel, qemu-s390x, thuth, pasic, alifm, borntraeger
On 3/11/19 1:33 PM, Cornelia Huck wrote:
> On Mon, 11 Mar 2019 11:21:18 -0400
> "Jason J. Herne" <jjherne@linux.ibm.com> wrote:
>
>> This is to support booting from vfio-ccw dasd devices. We basically implement
>> the real hardware ipl procedure. This allows for booting Linux guests on
>> vfio-ccw devices.
>>
>> vfio-ccw's channel program prefetch algorithm complicates ipl because most ipl
>> channel programs dynamically modify themselves. Details on the ipl process and
>> how we worked around this issue can be found in docs/devel/s390-dasd-ipl.txt.
>>
>> *********************
>> NOTE: Newer DASD units which initially present as control unit type 3990 may in
>> fact really be 2107. Some operating systems may enable 2107 features for these
>> devices thereby making sense id return a control unit type of 2107. I've added
>> support for control unit type 2107 so we can ipl from these devices.
>> *********************
>
> Ugh. I'd have hoped that would have been recognized as A Bad Idea the
> last time we had a design like that...
>
> Does that cu type switch persist over subchannel enable/disable?
> Subsystem reset?
It persists over a disable/enable, but not a reset it seems.
--
-- Jason J. Herne (jjherne@linux.ibm.com)
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 02/15] s390-bios: decouple cio setup from virtio
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 02/15] s390-bios: decouple cio setup from virtio Jason J. Herne
@ 2019-03-11 17:36 ` Cornelia Huck
0 siblings, 0 replies; 27+ messages in thread
From: Cornelia Huck @ 2019-03-11 17:36 UTC (permalink / raw)
To: Jason J. Herne; +Cc: qemu-devel, qemu-s390x, thuth, pasic, alifm, borntraeger
On Mon, 11 Mar 2019 11:21:20 -0400
"Jason J. Herne" <jjherne@linux.ibm.com> wrote:
> Move channel i/o setup code out to a separate function. This decouples cio
> setup from the virtio code path and allows us to make use of it for booting
> dasd devices.
>
> Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
> Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
> Reviewed-by: Collin Walling <walling@linux.ibm.com>
> Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
> Reviewed-by: Thomas Huth <thuth@redhat.com>
> ---
> pc-bios/s390-ccw/main.c | 20 +++++++++++++-------
> 1 file changed, 13 insertions(+), 7 deletions(-)
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[I could have sworn I already did that...]
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 07/15] s390-bios: Decouple channel i/o logic from virtio
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 07/15] s390-bios: Decouple channel i/o logic from virtio Jason J. Herne
@ 2019-03-11 17:39 ` Cornelia Huck
0 siblings, 0 replies; 27+ messages in thread
From: Cornelia Huck @ 2019-03-11 17:39 UTC (permalink / raw)
To: Jason J. Herne; +Cc: qemu-devel, qemu-s390x, thuth, pasic, alifm, borntraeger
On Mon, 11 Mar 2019 11:21:25 -0400
"Jason J. Herne" <jjherne@linux.ibm.com> wrote:
> Create a separate library for channel i/o related code. This decouples
> channel i/o operations from virtio and allows us to make use of them for
> the real dasd boot path.
>
> Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
> ---
> pc-bios/s390-ccw/Makefile | 2 +-
> pc-bios/s390-ccw/cio.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
> pc-bios/s390-ccw/cio.h | 3 +++
> pc-bios/s390-ccw/main.c | 1 +
> pc-bios/s390-ccw/netboot.mak | 2 +-
> pc-bios/s390-ccw/netmain.c | 1 +
> pc-bios/s390-ccw/s390-ccw.h | 1 -
> pc-bios/s390-ccw/virtio.c | 27 ++-------------------------
> 8 files changed, 53 insertions(+), 28 deletions(-)
> create mode 100644 pc-bios/s390-ccw/cio.c
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
` (21 preceding siblings ...)
2019-03-11 17:33 ` Cornelia Huck
@ 2019-03-11 17:49 ` no-reply
22 siblings, 0 replies; 27+ messages in thread
From: no-reply @ 2019-03-11 17:49 UTC (permalink / raw)
To: jjherne
Cc: fam, qemu-devel, qemu-s390x, cohuck, thuth, pasic, alifm, borntraeger
Patchew URL: https://patchew.org/QEMU/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
Subject: [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
t [tag update] patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com -> patchew/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com
t [tag update] patchew/20190311083234.20841-1-richardw.yang@linux.intel.com -> patchew/20190311083234.20841-1-richardw.yang@linux.intel.com
Switched to a new branch 'test'
28d0ad5902 s390-bios: Support booting from real dasd device
9863aa7f1a s390-bios: Add channel command codes/structs needed for dasd-ipl
a1ed77d45c s390-bios: Use control unit type to determine boot method
860ce9f087 s390-bios: Refactor virtio to run channel programs via cio
0b90862497 s390-bios: cio error handling
4a5815fd2d s390-bios: Support for running format-0/1 channel programs
6f541fc6ff s390-bios: ptr2u32 and u32toptr
5a73c3809c s390-bios: Map low core memory
b6fdd420ca s390-bios: Decouple channel i/o logic from virtio
ef25638533 s390-bios: Clean up cio.h
83ad1a9aaa s390-bios: Factor finding boot device out of virtio code path
cc5a61d5ce s390-bios: Extend find_dev() for non-virtio devices
e500fc51bf s390-bios: decouple common boot logic from virtio
aa95743df7 s390-bios: decouple cio setup from virtio
e57421e58c s390 vfio-ccw: Add bootindex property and IPLB data
=== OUTPUT BEGIN ===
1/15 Checking commit e57421e58ca0 (s390 vfio-ccw: Add bootindex property and IPLB data)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#220:
new file mode 100644
total: 0 errors, 1 warnings, 199 lines checked
Patch 1/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/15 Checking commit aa95743df7d3 (s390-bios: decouple cio setup from virtio)
3/15 Checking commit e500fc51bff8 (s390-bios: decouple common boot logic from virtio)
ERROR: externs should be avoided in .c files
#31: FILE: pc-bios/s390-ccw/main.c:19:
+IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
total: 1 errors, 0 warnings, 65 lines checked
Patch 3/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
4/15 Checking commit cc5a61d5ce83 (s390-bios: Extend find_dev() for non-virtio devices)
5/15 Checking commit 83ad1a9aaa66 (s390-bios: Factor finding boot device out of virtio code path)
6/15 Checking commit ef25638533aa (s390-bios: Clean up cio.h)
7/15 Checking commit b6fdd420cac1 (s390-bios: Decouple channel i/o logic from virtio)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#29:
new file mode 100644
total: 0 errors, 1 warnings, 123 lines checked
Patch 7/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
8/15 Checking commit 5a73c3809c0a (s390-bios: Map low core memory)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#36:
new file mode 100644
total: 0 errors, 1 warnings, 104 lines checked
Patch 8/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
9/15 Checking commit 6f541fc6ff3c (s390-bios: ptr2u32 and u32toptr)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#17:
new file mode 100644
total: 0 errors, 1 warnings, 31 lines checked
Patch 9/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/15 Checking commit 4a5815fd2dc3 (s390-bios: Support for running format-0/1 channel programs)
ERROR: trailing whitespace
#137: FILE: pc-bios/s390-ccw/cio.c:145:
+ * active (generating i/o interrupts). $
total: 1 errors, 0 warnings, 375 lines checked
Patch 10/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
11/15 Checking commit 0b90862497ba (s390-bios: cio error handling)
12/15 Checking commit 860ce9f0871d (s390-bios: Refactor virtio to run channel programs via cio)
WARNING: line over 80 characters
#103: FILE: pc-bios/s390-ccw/virtio.c:298:
+ run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config), false) == 0,
WARNING: line over 80 characters
#116: FILE: pc-bios/s390-ccw/virtio.c:308:
+ run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false) == 0,
total: 0 errors, 2 warnings, 107 lines checked
Patch 12/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
13/15 Checking commit a1ed77d45c63 (s390-bios: Use control unit type to determine boot method)
14/15 Checking commit 9863aa7f1a32 (s390-bios: Add channel command codes/structs needed for dasd-ipl)
15/15 Checking commit 28d0ad590207 (s390-bios: Support booting from real dasd device)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#26:
new file mode 100644
total: 0 errors, 1 warnings, 448 lines checked
Patch 15/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/1552317693-21979-1-git-send-email-jjherne@linux.ibm.com/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2019-03-11 17:59 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-11 15:21 [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 01/15] s390 vfio-ccw: Add bootindex property and IPLB data Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 02/15] s390-bios: decouple cio setup from virtio Jason J. Herne
2019-03-11 17:36 ` Cornelia Huck
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 03/15] s390-bios: decouple common boot logic " Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 04/15] s390-bios: Extend find_dev() for non-virtio devices Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 05/15] s390-bios: Factor finding boot device out of virtio code path Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 06/15] s390-bios: Clean up cio.h Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 07/15] s390-bios: Decouple channel i/o logic from virtio Jason J. Herne
2019-03-11 17:39 ` Cornelia Huck
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 08/15] s390-bios: Map low core memory Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 09/15] s390-bios: ptr2u32 and u32toptr Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 10/15] s390-bios: Support for running format-0/1 channel programs Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 11/15] s390-bios: cio error handling Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 12/15] s390-bios: Refactor virtio to run channel programs via cio Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 13/15] s390-bios: Use control unit type to determine boot method Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 14/15] s390-bios: Add channel command codes/structs needed for dasd-ipl Jason J. Herne
2019-03-11 15:21 ` [Qemu-devel] [PATCH v4 15/15] s390-bios: Support booting from real dasd device Jason J. Herne
2019-03-11 15:57 ` [Qemu-devel] [PATCH v4 00/15] s390: vfio-ccw dasd ipl support no-reply
2019-03-11 16:11 ` no-reply
2019-03-11 16:16 ` no-reply
2019-03-11 16:20 ` no-reply
2019-03-11 16:24 ` no-reply
2019-03-11 16:29 ` no-reply
2019-03-11 17:33 ` Cornelia Huck
2019-03-11 17:35 ` Jason J. Herne
2019-03-11 17:49 ` no-reply
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.