All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH RFC 0/1] gnss: get serial speed from subdrivers
@ 2019-03-28 10:03 ` Loys Ollivier
  0 siblings, 0 replies; 4+ messages in thread
From: Loys Ollivier @ 2019-03-28 10:03 UTC (permalink / raw)
  To: Johan Hovold, Matthias Brugger
  Cc: Loys Ollivier, Colin Ian King, linux-arm-kernel, linux-mediatek,
	linux-kernel

Hello,

Here's a patch that moves the currently hardcoded, default serial speed
to the subdrivers.
If the default speed is not specified by the subdriver then it is read
from the device tree.

Please let me know what you think !

Cheers,
Loys

Loys Ollivier (1):
  gnss: get serial speed from subdrivers

 drivers/gnss/mtk.c    |  6 +++++-
 drivers/gnss/serial.c | 21 +++++++++++++--------
 drivers/gnss/serial.h |  3 ++-
 drivers/gnss/ubx.c    |  3 ++-
 4 files changed, 22 insertions(+), 11 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 4+ messages in thread
* [PATCH RFC 0/1] gnss: get serial speed from subdrivers
@ 2019-03-28 10:03 ` Loys Ollivier
  0 siblings, 0 replies; 4+ messages in thread
From: Loys Ollivier @ 2019-03-28 10:03 UTC (permalink / raw)
  To: Johan Hovold, Matthias Brugger
  Cc: Colin Ian King, Loys Ollivier, linux-mediatek, linux-kernel,
	linux-arm-kernel

Hello,

Here's a patch that moves the currently hardcoded, default serial speed
to the subdrivers.
If the default speed is not specified by the subdriver then it is read
from the device tree.

Please let me know what you think !

Cheers,
Loys

Loys Ollivier (1):
  gnss: get serial speed from subdrivers

 drivers/gnss/mtk.c    |  6 +++++-
 drivers/gnss/serial.c | 21 +++++++++++++--------
 drivers/gnss/serial.h |  3 ++-
 drivers/gnss/ubx.c    |  3 ++-
 4 files changed, 22 insertions(+), 11 deletions(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 4+ messages in thread
* [PATCH RFC 1/1] gnss: get serial speed from subdrivers
  2019-03-28 10:03 ` Loys Ollivier
@ 2019-03-28 10:03   ` Loys Ollivier
  -1 siblings, 0 replies; 4+ messages in thread
From: Loys Ollivier @ 2019-03-28 10:03 UTC (permalink / raw)
  To: Johan Hovold, Matthias Brugger
  Cc: Loys Ollivier, Colin Ian King, linux-arm-kernel, linux-mediatek,
	linux-kernel

The default serial speed was hardcoded in the code.
Rename current-speed to default-speed.
Add a function parameter that lets the subdrivers specify their
default speed.
If not specified fallback to the device-tree default-speed.

Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
---
 drivers/gnss/mtk.c    |  6 +++++-
 drivers/gnss/serial.c | 21 +++++++++++++--------
 drivers/gnss/serial.h |  3 ++-
 drivers/gnss/ubx.c    |  3 ++-
 4 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/gnss/mtk.c b/drivers/gnss/mtk.c
index d1fc55560daf..a1a89f0cc75c 100644
--- a/drivers/gnss/mtk.c
+++ b/drivers/gnss/mtk.c
@@ -16,6 +16,10 @@
 
 #include "serial.h"
 
+static uint serial_speed = 9600; /* Serial speed (baud rate) */
+module_param(serial_speed, uint, 0644);
+MODULE_PARM_DESC(serial_speed, "Serial baud rate (bit/s), (default = 9600)");
+
 struct mtk_data {
 	struct regulator *vbackup;
 	struct regulator *vcc;
@@ -69,7 +73,7 @@ static int mtk_probe(struct serdev_device *serdev)
 	struct mtk_data *data;
 	int ret;
 
-	gserial = gnss_serial_allocate(serdev, sizeof(*data));
+	gserial = gnss_serial_allocate(serdev, sizeof(*data), serial_speed);
 	if (IS_ERR(gserial)) {
 		ret = PTR_ERR(gserial);
 		return ret;
diff --git a/drivers/gnss/serial.c b/drivers/gnss/serial.c
index def64b36d994..706fc5b46811 100644
--- a/drivers/gnss/serial.c
+++ b/drivers/gnss/serial.c
@@ -103,17 +103,13 @@ static int gnss_serial_set_power(struct gnss_serial *gserial,
 	return gserial->ops->set_power(gserial, state);
 }
 
-/*
- * FIXME: need to provide subdriver defaults or separate dt parsing from
- * allocation.
- */
 static int gnss_serial_parse_dt(struct serdev_device *serdev)
 {
 	struct gnss_serial *gserial = serdev_device_get_drvdata(serdev);
 	struct device_node *node = serdev->dev.of_node;
-	u32 speed = 4800;
+	uint speed;
 
-	of_property_read_u32(node, "current-speed", &speed);
+	of_property_read_u32(node, "default-speed", &speed);
 
 	gserial->speed = speed;
 
@@ -121,7 +117,8 @@ static int gnss_serial_parse_dt(struct serdev_device *serdev)
 }
 
 struct gnss_serial *gnss_serial_allocate(struct serdev_device *serdev,
-						size_t data_size)
+					 size_t data_size,
+					 uint serial_speed)
 {
 	struct gnss_serial *gserial;
 	struct gnss_device *gdev;
@@ -146,10 +143,18 @@ struct gnss_serial *gnss_serial_allocate(struct serdev_device *serdev,
 	serdev_device_set_drvdata(serdev, gserial);
 	serdev_device_set_client_ops(serdev, &gnss_serial_serdev_ops);
 
-	ret = gnss_serial_parse_dt(serdev);
+	/* Serial speed provided by subdriver takes precedence over dt*/
+	if (!serial_speed)
+		ret = gnss_serial_parse_dt(serdev);
+	else
+		gserial->speed = serial_speed;
+
 	if (ret)
 		goto err_put_device;
 
+	if (!gserial->speed)
+		return -EINVAL;
+
 	return gserial;
 
 err_put_device:
diff --git a/drivers/gnss/serial.h b/drivers/gnss/serial.h
index 980ffdc86c2a..29212b57a739 100644
--- a/drivers/gnss/serial.h
+++ b/drivers/gnss/serial.h
@@ -33,7 +33,8 @@ struct gnss_serial_ops {
 extern const struct dev_pm_ops gnss_serial_pm_ops;
 
 struct gnss_serial *gnss_serial_allocate(struct serdev_device *gserial,
-						size_t data_size);
+					 size_t data_size,
+					 uint serial_speed);
 void gnss_serial_free(struct gnss_serial *gserial);
 
 int gnss_serial_register(struct gnss_serial *gserial);
diff --git a/drivers/gnss/ubx.c b/drivers/gnss/ubx.c
index 12568aebb7f6..6cfcb2eebdfd 100644
--- a/drivers/gnss/ubx.c
+++ b/drivers/gnss/ubx.c
@@ -68,8 +68,9 @@ static int ubx_probe(struct serdev_device *serdev)
 	struct gnss_serial *gserial;
 	struct ubx_data *data;
 	int ret;
+	uint speed = 4800;
 
-	gserial = gnss_serial_allocate(serdev, sizeof(*data));
+	gserial = gnss_serial_allocate(serdev, sizeof(*data), speed);
 	if (IS_ERR(gserial)) {
 		ret = PTR_ERR(gserial);
 		return ret;
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH RFC 1/1] gnss: get serial speed from subdrivers
@ 2019-03-28 10:03   ` Loys Ollivier
  0 siblings, 0 replies; 4+ messages in thread
From: Loys Ollivier @ 2019-03-28 10:03 UTC (permalink / raw)
  To: Johan Hovold, Matthias Brugger
  Cc: Colin Ian King, Loys Ollivier, linux-mediatek, linux-kernel,
	linux-arm-kernel

The default serial speed was hardcoded in the code.
Rename current-speed to default-speed.
Add a function parameter that lets the subdrivers specify their
default speed.
If not specified fallback to the device-tree default-speed.

Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
---
 drivers/gnss/mtk.c    |  6 +++++-
 drivers/gnss/serial.c | 21 +++++++++++++--------
 drivers/gnss/serial.h |  3 ++-
 drivers/gnss/ubx.c    |  3 ++-
 4 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/gnss/mtk.c b/drivers/gnss/mtk.c
index d1fc55560daf..a1a89f0cc75c 100644
--- a/drivers/gnss/mtk.c
+++ b/drivers/gnss/mtk.c
@@ -16,6 +16,10 @@
 
 #include "serial.h"
 
+static uint serial_speed = 9600; /* Serial speed (baud rate) */
+module_param(serial_speed, uint, 0644);
+MODULE_PARM_DESC(serial_speed, "Serial baud rate (bit/s), (default = 9600)");
+
 struct mtk_data {
 	struct regulator *vbackup;
 	struct regulator *vcc;
@@ -69,7 +73,7 @@ static int mtk_probe(struct serdev_device *serdev)
 	struct mtk_data *data;
 	int ret;
 
-	gserial = gnss_serial_allocate(serdev, sizeof(*data));
+	gserial = gnss_serial_allocate(serdev, sizeof(*data), serial_speed);
 	if (IS_ERR(gserial)) {
 		ret = PTR_ERR(gserial);
 		return ret;
diff --git a/drivers/gnss/serial.c b/drivers/gnss/serial.c
index def64b36d994..706fc5b46811 100644
--- a/drivers/gnss/serial.c
+++ b/drivers/gnss/serial.c
@@ -103,17 +103,13 @@ static int gnss_serial_set_power(struct gnss_serial *gserial,
 	return gserial->ops->set_power(gserial, state);
 }
 
-/*
- * FIXME: need to provide subdriver defaults or separate dt parsing from
- * allocation.
- */
 static int gnss_serial_parse_dt(struct serdev_device *serdev)
 {
 	struct gnss_serial *gserial = serdev_device_get_drvdata(serdev);
 	struct device_node *node = serdev->dev.of_node;
-	u32 speed = 4800;
+	uint speed;
 
-	of_property_read_u32(node, "current-speed", &speed);
+	of_property_read_u32(node, "default-speed", &speed);
 
 	gserial->speed = speed;
 
@@ -121,7 +117,8 @@ static int gnss_serial_parse_dt(struct serdev_device *serdev)
 }
 
 struct gnss_serial *gnss_serial_allocate(struct serdev_device *serdev,
-						size_t data_size)
+					 size_t data_size,
+					 uint serial_speed)
 {
 	struct gnss_serial *gserial;
 	struct gnss_device *gdev;
@@ -146,10 +143,18 @@ struct gnss_serial *gnss_serial_allocate(struct serdev_device *serdev,
 	serdev_device_set_drvdata(serdev, gserial);
 	serdev_device_set_client_ops(serdev, &gnss_serial_serdev_ops);
 
-	ret = gnss_serial_parse_dt(serdev);
+	/* Serial speed provided by subdriver takes precedence over dt*/
+	if (!serial_speed)
+		ret = gnss_serial_parse_dt(serdev);
+	else
+		gserial->speed = serial_speed;
+
 	if (ret)
 		goto err_put_device;
 
+	if (!gserial->speed)
+		return -EINVAL;
+
 	return gserial;
 
 err_put_device:
diff --git a/drivers/gnss/serial.h b/drivers/gnss/serial.h
index 980ffdc86c2a..29212b57a739 100644
--- a/drivers/gnss/serial.h
+++ b/drivers/gnss/serial.h
@@ -33,7 +33,8 @@ struct gnss_serial_ops {
 extern const struct dev_pm_ops gnss_serial_pm_ops;
 
 struct gnss_serial *gnss_serial_allocate(struct serdev_device *gserial,
-						size_t data_size);
+					 size_t data_size,
+					 uint serial_speed);
 void gnss_serial_free(struct gnss_serial *gserial);
 
 int gnss_serial_register(struct gnss_serial *gserial);
diff --git a/drivers/gnss/ubx.c b/drivers/gnss/ubx.c
index 12568aebb7f6..6cfcb2eebdfd 100644
--- a/drivers/gnss/ubx.c
+++ b/drivers/gnss/ubx.c
@@ -68,8 +68,9 @@ static int ubx_probe(struct serdev_device *serdev)
 	struct gnss_serial *gserial;
 	struct ubx_data *data;
 	int ret;
+	uint speed = 4800;
 
-	gserial = gnss_serial_allocate(serdev, sizeof(*data));
+	gserial = gnss_serial_allocate(serdev, sizeof(*data), speed);
 	if (IS_ERR(gserial)) {
 		ret = PTR_ERR(gserial);
 		return ret;
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-03-28 10:03 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-28 10:03 [PATCH RFC 0/1] gnss: get serial speed from subdrivers Loys Ollivier
2019-03-28 10:03 ` Loys Ollivier
2019-03-28 10:03 ` [PATCH RFC 1/1] " Loys Ollivier
2019-03-28 10:03   ` Loys Ollivier

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.