All of lore.kernel.org
 help / color / mirror / Atom feed
From: Erin Lo <erin.lo@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: <devicetree@vger.kernel.org>,
	srv_heupstream <srv_heupstream@mediatek.com>,
	<linux-kernel@vger.kernel.org>, <linux-serial@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>, <erin.lo@mediatek.com>,
	<mars.cheng@mediatek.com>, <eddie.huang@mediatek.com>
Subject: [PATCH v10] Add basic and clock support for Mediatek MT8183 SoC
Date: Tue, 16 Apr 2019 16:12:10 +0800	[thread overview]
Message-ID: <1555402331-5343-1-git-send-email-erin.lo@mediatek.com> (raw)

MT8183 is a SoC based on 64bit ARMv8 architecture.
It contains 4 CA53 and 4 CA73 cores.
MT8183 share many HW IP with MT65xx series.
This patchset was tested on MT8183 evaluation board and use correct clock to shell.

Based on v5.1-rc1 and
http://lists.infradead.org/pipermail/linux-mediatek/2019-March/017963.html

Change in v10:
Add the L2 cache node to prevent warning on unable to detect cache
hierarchy.

Change in v9:
Remove pio node since binding is not documented yet

Change in v8:
1. Fix interrupt-parent of pio node
2. Remove pinfunc.h and spi node patches

Change in v7:
1. Place all the MMIO peripherals under one or more simple-bus nodes
2. Make the pinfunc.h and spi node into seperate patch
3. Modify SPIs pamerater from 4 back to 3
   and remove patch "support 4 interrupt parameters for sysirq"
4. Rename intpol-controller to interrupt-controller
5. Rename pinctrl@1000b000 to pinctrl@10005000

Change in v6:
1. Remove power and iommu nodes
2. Fix dtb build warning
3. Fix pinctrl binding doc
4. Fix '_' in node names

Change in v5:
1. Collect all device tree nodes to the last patch
2. Add PMU
3. Add Signed-off-by
4. Remove clock driver code and binding doc
5. Add pinctrl, iommu, spi, and pwrap nodes

Change in v4:
1. Correct syntax error in dtsi
2. Add MT8183 clock support

Change in v3:
1. Fill out GICC, GICH, GICV regions
2. Update Copyright to 2018

Change in v2:
1. Split dt-bindings into different patches
2. Correct bindings for supported SoCs (mtk-uart.txt)

Ben Ho (1):
  arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
    Makefile

 arch/arm64/boot/dts/mediatek/Makefile       |   1 +
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts |  31 +++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi    | 329 ++++++++++++++++++++++++++++
 3 files changed, 361 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183.dtsi

--
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Erin Lo <erin.lo@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org,
	srv_heupstream <srv_heupstream@mediatek.com>,
	linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, erin.lo@mediatek.com,
	mars.cheng@mediatek.com, eddie.huang@mediatek.com
Subject: [PATCH v10] Add basic and clock support for Mediatek MT8183 SoC
Date: Tue, 16 Apr 2019 16:12:10 +0800	[thread overview]
Message-ID: <1555402331-5343-1-git-send-email-erin.lo@mediatek.com> (raw)

MT8183 is a SoC based on 64bit ARMv8 architecture.
It contains 4 CA53 and 4 CA73 cores.
MT8183 share many HW IP with MT65xx series.
This patchset was tested on MT8183 evaluation board and use correct clock to shell.

Based on v5.1-rc1 and
http://lists.infradead.org/pipermail/linux-mediatek/2019-March/017963.html

Change in v10:
Add the L2 cache node to prevent warning on unable to detect cache
hierarchy.

Change in v9:
Remove pio node since binding is not documented yet

Change in v8:
1. Fix interrupt-parent of pio node
2. Remove pinfunc.h and spi node patches

Change in v7:
1. Place all the MMIO peripherals under one or more simple-bus nodes
2. Make the pinfunc.h and spi node into seperate patch
3. Modify SPIs pamerater from 4 back to 3
   and remove patch "support 4 interrupt parameters for sysirq"
4. Rename intpol-controller to interrupt-controller
5. Rename pinctrl@1000b000 to pinctrl@10005000

Change in v6:
1. Remove power and iommu nodes
2. Fix dtb build warning
3. Fix pinctrl binding doc
4. Fix '_' in node names

Change in v5:
1. Collect all device tree nodes to the last patch
2. Add PMU
3. Add Signed-off-by
4. Remove clock driver code and binding doc
5. Add pinctrl, iommu, spi, and pwrap nodes

Change in v4:
1. Correct syntax error in dtsi
2. Add MT8183 clock support

Change in v3:
1. Fill out GICC, GICH, GICV regions
2. Update Copyright to 2018

Change in v2:
1. Split dt-bindings into different patches
2. Correct bindings for supported SoCs (mtk-uart.txt)

Ben Ho (1):
  arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
    Makefile

 arch/arm64/boot/dts/mediatek/Makefile       |   1 +
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts |  31 +++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi    | 329 ++++++++++++++++++++++++++++
 3 files changed, 361 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183.dtsi

--
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Erin Lo <erin.lo@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org,
	srv_heupstream <srv_heupstream@mediatek.com>,
	erin.lo@mediatek.com, linux-kernel@vger.kernel.org,
	linux-mediatek@lists.infradead.org, linux-serial@vger.kernel.org,
	mars.cheng@mediatek.com, eddie.huang@mediatek.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10] Add basic and clock support for Mediatek MT8183 SoC
Date: Tue, 16 Apr 2019 16:12:10 +0800	[thread overview]
Message-ID: <1555402331-5343-1-git-send-email-erin.lo@mediatek.com> (raw)

MT8183 is a SoC based on 64bit ARMv8 architecture.
It contains 4 CA53 and 4 CA73 cores.
MT8183 share many HW IP with MT65xx series.
This patchset was tested on MT8183 evaluation board and use correct clock to shell.

Based on v5.1-rc1 and
http://lists.infradead.org/pipermail/linux-mediatek/2019-March/017963.html

Change in v10:
Add the L2 cache node to prevent warning on unable to detect cache
hierarchy.

Change in v9:
Remove pio node since binding is not documented yet

Change in v8:
1. Fix interrupt-parent of pio node
2. Remove pinfunc.h and spi node patches

Change in v7:
1. Place all the MMIO peripherals under one or more simple-bus nodes
2. Make the pinfunc.h and spi node into seperate patch
3. Modify SPIs pamerater from 4 back to 3
   and remove patch "support 4 interrupt parameters for sysirq"
4. Rename intpol-controller to interrupt-controller
5. Rename pinctrl@1000b000 to pinctrl@10005000

Change in v6:
1. Remove power and iommu nodes
2. Fix dtb build warning
3. Fix pinctrl binding doc
4. Fix '_' in node names

Change in v5:
1. Collect all device tree nodes to the last patch
2. Add PMU
3. Add Signed-off-by
4. Remove clock driver code and binding doc
5. Add pinctrl, iommu, spi, and pwrap nodes

Change in v4:
1. Correct syntax error in dtsi
2. Add MT8183 clock support

Change in v3:
1. Fill out GICC, GICH, GICV regions
2. Update Copyright to 2018

Change in v2:
1. Split dt-bindings into different patches
2. Correct bindings for supported SoCs (mtk-uart.txt)

Ben Ho (1):
  arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
    Makefile

 arch/arm64/boot/dts/mediatek/Makefile       |   1 +
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts |  31 +++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi    | 329 ++++++++++++++++++++++++++++
 3 files changed, 361 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183.dtsi

--
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-04-16  8:12 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-16  8:12 Erin Lo [this message]
2019-04-16  8:12 ` [PATCH v10] Add basic and clock support for Mediatek MT8183 SoC Erin Lo
2019-04-16  8:12 ` Erin Lo
2019-04-16  8:12 ` [PATCH v10] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile Erin Lo
2019-04-16  8:12   ` Erin Lo
2019-04-16  8:12   ` Erin Lo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1555402331-5343-1-git-send-email-erin.lo@mediatek.com \
    --to=erin.lo@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eddie.huang@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mars.cheng@mediatek.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=srv_heupstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.