[Qemu-devel] [PATCH v3 0/2] commit: Make base read-only if there is an early failure

[Qemu-devel] [PATCH v3 0/2] commit: Make base read-only if there is an early failure

[Alberto Garcia]

Hi,

Here's v3 of this series, the only changes are the corrections in the
iotest suggested by Max.

Regards,

Berto

v3:
- Patch 2: Use $() instead of backquotes, remove 'here' variable and
  don't use 'sleep' when waiting for block-commit to finish [Max]

v2: https://lists.gnu.org/archive/html/qemu-block/2019-04/msg00334.html
- Patch 2: Added test case

v1: https://lists.gnu.org/archive/html/qemu-block/2019-04/msg00281.html

Output of backport-diff against v2:

Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch
[down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively

Alberto Garcia (2):
  commit: Make base read-only if there is an early failure
  iotests: Check that images are in read-only mode after block-commit

 block/commit.c             |   3 ++
 tests/qemu-iotests/249     | 115 +++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/249.out |  35 ++++++++++++++
 tests/qemu-iotests/group   |   1 +
 4 files changed, 154 insertions(+)
 create mode 100755 tests/qemu-iotests/249
 create mode 100644 tests/qemu-iotests/249.out

-- 
2.11.0

[Qemu-devel] [PATCH v3 0/2] commit: Make base read-only if there is an early failure

[Alberto Garcia]

Hi,

Here's v3 of this series, the only changes are the corrections in the
iotest suggested by Max.

Regards,

Berto

v3:
- Patch 2: Use $() instead of backquotes, remove 'here' variable and
  don't use 'sleep' when waiting for block-commit to finish [Max]

v2: https://lists.gnu.org/archive/html/qemu-block/2019-04/msg00334.html
- Patch 2: Added test case

v1: https://lists.gnu.org/archive/html/qemu-block/2019-04/msg00281.html

Output of backport-diff against v2:

Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch
[down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively

Alberto Garcia (2):
  commit: Make base read-only if there is an early failure
  iotests: Check that images are in read-only mode after block-commit

 block/commit.c             |   3 ++
 tests/qemu-iotests/249     | 115 +++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/249.out |  35 ++++++++++++++
 tests/qemu-iotests/group   |   1 +
 4 files changed, 154 insertions(+)
 create mode 100755 tests/qemu-iotests/249
 create mode 100644 tests/qemu-iotests/249.out

-- 
2.11.0

[Qemu-devel] [PATCH v3 1/2] commit: Make base read-only if there is an early failure

[Alberto Garcia]

You can reproduce this by passing an invalid filter-node-name (like
"1234") to block-commit. In this case the base image is put in
read-write mode but is never reset back to read-only.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 block/commit.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/block/commit.c b/block/commit.c
index ba60fef58a..698eda1dfe 100644
--- a/block/commit.c
+++ b/block/commit.c
@@ -384,6 +384,9 @@ fail:
     if (s->top) {
         blk_unref(s->top);
     }
+    if (s->base_read_only) {
+        bdrv_reopen_set_read_only(base, true, NULL);
+    }
     job_early_fail(&s->common.job);
     /* commit_top_bs has to be replaced after deleting the block job,
      * otherwise this would fail because of lack of permissions. */
-- 
2.11.0

[Qemu-devel] [PATCH v3 1/2] commit: Make base read-only if there is an early failure

[Alberto Garcia]

You can reproduce this by passing an invalid filter-node-name (like
"1234") to block-commit. In this case the base image is put in
read-write mode but is never reset back to read-only.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 block/commit.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/block/commit.c b/block/commit.c
index ba60fef58a..698eda1dfe 100644
--- a/block/commit.c
+++ b/block/commit.c
@@ -384,6 +384,9 @@ fail:
     if (s->top) {
         blk_unref(s->top);
     }
+    if (s->base_read_only) {
+        bdrv_reopen_set_read_only(base, true, NULL);
+    }
     job_early_fail(&s->common.job);
     /* commit_top_bs has to be replaced after deleting the block job,
      * otherwise this would fail because of lack of permissions. */
-- 
2.11.0

[Qemu-devel] [PATCH v3 2/2] iotests: Check that images are in read-only mode after block-commit

[Alberto Garcia]

This tests the fix from the previous patch.

Signed-off-by: Alberto Garcia <berto@igalia.com>
---
 tests/qemu-iotests/249     | 115 +++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/249.out |  35 ++++++++++++++
 tests/qemu-iotests/group   |   1 +
 3 files changed, 151 insertions(+)
 create mode 100755 tests/qemu-iotests/249
 create mode 100644 tests/qemu-iotests/249.out

diff --git a/tests/qemu-iotests/249 b/tests/qemu-iotests/249
new file mode 100755
index 0000000000..e4650ecf6b
--- /dev/null
+++ b/tests/qemu-iotests/249
@@ -0,0 +1,115 @@
+#!/usr/bin/env bash
+#
+# Test that a backing image is put back in read-only mode after
+# block-commit (both when it fails and when it succeeds).
+#
+# Copyright (C) 2019 Igalia, S.L.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=berto@igalia.com
+
+seq="$(basename $0)"
+echo "QA output created by $seq"
+
+status=1	# failure is the default!
+
+_cleanup()
+{
+    _cleanup_test_img
+    rm -f "$TEST_IMG.base"
+    rm -f "$TEST_IMG.int"
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+. ./common.qemu
+
+# Any format implementing BlockDriver.bdrv_change_backing_file
+_supported_fmt qcow2 qed
+_supported_proto file
+_supported_os Linux
+
+IMG_SIZE=1M
+
+# Create the images: base <- int <- active
+TEST_IMG="$TEST_IMG.base" _make_test_img $IMG_SIZE | _filter_imgfmt
+TEST_IMG="$TEST_IMG.int" _make_test_img -b "$TEST_IMG.base" | _filter_imgfmt
+_make_test_img -b "$TEST_IMG.int" | _filter_imgfmt
+
+# Launch QEMU with these two drives:
+# none0: base (read-only)
+# none1: base <- int <- active
+_launch_qemu -drive if=none,file="${TEST_IMG}.base",node-name=base,read-only=on \
+             -drive if=none,file="${TEST_IMG}",backing.node-name=int,backing.backing=base
+
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'qmp_capabilities' }" \
+    'return'
+
+echo
+echo '=== Send a write command to a drive opened in read-only mode (1)'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'human-monitor-command',
+       'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \
+    'return'
+
+echo
+echo '=== Run block-commit on base using an invalid filter node name'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'block-commit',
+       'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int',
+                     'filter-node-name': '1234'}}" \
+    'error'
+
+echo
+echo '=== Send a write command to a drive opened in read-only mode (2)'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'human-monitor-command',
+       'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \
+    'return'
+
+echo
+echo '=== Run block-commit on base using the default filter node name'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'block-commit',
+       'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int'}}" \
+    'return'
+
+# Wait for block-commit to finish
+_send_qemu_cmd $QEMU_HANDLE '' \
+    '"status": "null"'
+
+echo
+echo '=== Send a write command to a drive opened in read-only mode (3)'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'human-monitor-command',
+       'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \
+    'return'
+
+_cleanup_qemu
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
diff --git a/tests/qemu-iotests/249.out b/tests/qemu-iotests/249.out
new file mode 100644
index 0000000000..1c93164e84
--- /dev/null
+++ b/tests/qemu-iotests/249.out
@@ -0,0 +1,35 @@
+QA output created by 249
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1048576
+Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int
+{"return": {}}
+
+=== Send a write command to a drive opened in read-only mode (1)
+
+{"return": "Block node is read-onlyrn"}
+
+=== Run block-commit on base using an invalid filter node name
+
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}}
+{"error": {"class": "GenericError", "desc": "Invalid node name"}}
+
+=== Send a write command to a drive opened in read-only mode (2)
+
+{"return": "Block node is read-onlyrn"}
+
+=== Run block-commit on base using the default filter node name
+
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "job0"}}
+{"return": {}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "waiting", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "pending", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "job0", "len": 1048576, "offset": 1048576, "speed": 0, "type": "commit"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "concluded", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}}
+
+=== Send a write command to a drive opened in read-only mode (3)
+
+{"return": "Block node is read-onlyrn"}
+*** done
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index bae7718380..7ac9a5ea4a 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -248,3 +248,4 @@
 246 rw auto quick
 247 rw auto quick
 248 rw auto quick
+249 rw auto quick
-- 
2.11.0

[Qemu-devel] [PATCH v3 2/2] iotests: Check that images are in read-only mode after block-commit

[Alberto Garcia]

This tests the fix from the previous patch.

Signed-off-by: Alberto Garcia <berto@igalia.com>
---
 tests/qemu-iotests/249     | 115 +++++++++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/249.out |  35 ++++++++++++++
 tests/qemu-iotests/group   |   1 +
 3 files changed, 151 insertions(+)
 create mode 100755 tests/qemu-iotests/249
 create mode 100644 tests/qemu-iotests/249.out

diff --git a/tests/qemu-iotests/249 b/tests/qemu-iotests/249
new file mode 100755
index 0000000000..e4650ecf6b
--- /dev/null
+++ b/tests/qemu-iotests/249
@@ -0,0 +1,115 @@
+#!/usr/bin/env bash
+#
+# Test that a backing image is put back in read-only mode after
+# block-commit (both when it fails and when it succeeds).
+#
+# Copyright (C) 2019 Igalia, S.L.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=berto@igalia.com
+
+seq="$(basename $0)"
+echo "QA output created by $seq"
+
+status=1	# failure is the default!
+
+_cleanup()
+{
+    _cleanup_test_img
+    rm -f "$TEST_IMG.base"
+    rm -f "$TEST_IMG.int"
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+. ./common.qemu
+
+# Any format implementing BlockDriver.bdrv_change_backing_file
+_supported_fmt qcow2 qed
+_supported_proto file
+_supported_os Linux
+
+IMG_SIZE=1M
+
+# Create the images: base <- int <- active
+TEST_IMG="$TEST_IMG.base" _make_test_img $IMG_SIZE | _filter_imgfmt
+TEST_IMG="$TEST_IMG.int" _make_test_img -b "$TEST_IMG.base" | _filter_imgfmt
+_make_test_img -b "$TEST_IMG.int" | _filter_imgfmt
+
+# Launch QEMU with these two drives:
+# none0: base (read-only)
+# none1: base <- int <- active
+_launch_qemu -drive if=none,file="${TEST_IMG}.base",node-name=base,read-only=on \
+             -drive if=none,file="${TEST_IMG}",backing.node-name=int,backing.backing=base
+
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'qmp_capabilities' }" \
+    'return'
+
+echo
+echo '=== Send a write command to a drive opened in read-only mode (1)'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'human-monitor-command',
+       'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \
+    'return'
+
+echo
+echo '=== Run block-commit on base using an invalid filter node name'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'block-commit',
+       'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int',
+                     'filter-node-name': '1234'}}" \
+    'error'
+
+echo
+echo '=== Send a write command to a drive opened in read-only mode (2)'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'human-monitor-command',
+       'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \
+    'return'
+
+echo
+echo '=== Run block-commit on base using the default filter node name'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'block-commit',
+       'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int'}}" \
+    'return'
+
+# Wait for block-commit to finish
+_send_qemu_cmd $QEMU_HANDLE '' \
+    '"status": "null"'
+
+echo
+echo '=== Send a write command to a drive opened in read-only mode (3)'
+echo
+_send_qemu_cmd $QEMU_HANDLE \
+    "{ 'execute': 'human-monitor-command',
+       'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \
+    'return'
+
+_cleanup_qemu
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
diff --git a/tests/qemu-iotests/249.out b/tests/qemu-iotests/249.out
new file mode 100644
index 0000000000..1c93164e84
--- /dev/null
+++ b/tests/qemu-iotests/249.out
@@ -0,0 +1,35 @@
+QA output created by 249
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1048576
+Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int
+{"return": {}}
+
+=== Send a write command to a drive opened in read-only mode (1)
+
+{"return": "Block node is read-onlyrn"}
+
+=== Run block-commit on base using an invalid filter node name
+
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}}
+{"error": {"class": "GenericError", "desc": "Invalid node name"}}
+
+=== Send a write command to a drive opened in read-only mode (2)
+
+{"return": "Block node is read-onlyrn"}
+
+=== Run block-commit on base using the default filter node name
+
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "job0"}}
+{"return": {}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "waiting", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "pending", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "job0", "len": 1048576, "offset": 1048576, "speed": 0, "type": "commit"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "concluded", "id": "job0"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}}
+
+=== Send a write command to a drive opened in read-only mode (3)
+
+{"return": "Block node is read-onlyrn"}
+*** done
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index bae7718380..7ac9a5ea4a 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -248,3 +248,4 @@
 246 rw auto quick
 247 rw auto quick
 248 rw auto quick
+249 rw auto quick
-- 
2.11.0

Re: [Qemu-devel] [PATCH v3 0/2] commit: Make base read-only if there is an early failure

[no-reply]

Patchew URL: https://patchew.org/QEMU/cover.1556540297.git.berto@igalia.com/



Hi,

This series failed the docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14 NETWORK=1
=== TEST SCRIPT END ===




The full log is available at
http://patchew.org/logs/cover.1556540297.git.berto@igalia.com/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

Re: [Qemu-devel] [PATCH v3 0/2] commit: Make base read-only if there is an early failure

[no-reply]

Patchew URL: https://patchew.org/QEMU/cover.1556540297.git.berto@igalia.com/



Hi,

This series failed the docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14 NETWORK=1
=== TEST SCRIPT END ===




The full log is available at
http://patchew.org/logs/cover.1556540297.git.berto@igalia.com/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

Re: [Qemu-devel] [PATCH v3 0/2] commit: Make base read-only if there is an early failure

[no-reply]

Patchew URL: https://patchew.org/QEMU/cover.1556540297.git.berto@igalia.com/



Hi,

This series failed the asan build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1
=== TEST SCRIPT END ===




The full log is available at
http://patchew.org/logs/cover.1556540297.git.berto@igalia.com/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

Re: [Qemu-devel] [PATCH v3 0/2] commit: Make base read-only if there is an early failure

[no-reply]

Patchew URL: https://patchew.org/QEMU/cover.1556540297.git.berto@igalia.com/



Hi,

This series failed the asan build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1
=== TEST SCRIPT END ===




The full log is available at
http://patchew.org/logs/cover.1556540297.git.berto@igalia.com/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

Re: [Qemu-devel] [PATCH v3 0/2] commit: Make base read-only if there is an early failure

[Kevin Wolf]

Am 29.04.2019 um 15:51 hat Alberto Garcia geschrieben:
> Hi,
> 
> Here's v3 of this series, the only changes are the corrections in the
> iotest suggested by Max.

Thanks, applied to the block branch.

Kevin