[PATCH v3 0/2] Add supply property for DSI controller

[PATCH v3 0/2] Add supply property for DSI controller

[Yannick Fertré]

The DSI controller needs a new property that powers its physical layer.
Binding has been updated to documented this property.
Device tree of stm32mp157c soc.
Move reg18 & reg11 to stm32mp157c device tree file.
Remove property phy-dsi-supply property to stm32mp157c-dk2.dts file.

Changes in v2:
- rename patch drm/stm: dsi: add support of an optional regulator
- rework dw_mipi_dsi-stm probe sequence

Changes in v3:
- remove device-tree patches
- replace the optional regulator by a regulator

Yannick Fertré (2):
  dt-bindings: display: stm32: add supply property to DSI controller
  drm/stm: dsi: add support of an regulator

 .../devicetree/bindings/display/st,stm32-ltdc.txt  |  3 ++
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c              | 53 ++++++++++++++++++----
 2 files changed, 48 insertions(+), 8 deletions(-)

--
2.7.4

[PATCH v3 0/2] Add supply property for DSI controller

[Yannick Fertré]

The DSI controller needs a new property that powers its physical layer.
Binding has been updated to documented this property.
Device tree of stm32mp157c soc.
Move reg18 & reg11 to stm32mp157c device tree file.
Remove property phy-dsi-supply property to stm32mp157c-dk2.dts file.

Changes in v2:
- rename patch drm/stm: dsi: add support of an optional regulator
- rework dw_mipi_dsi-stm probe sequence

Changes in v3:
- remove device-tree patches
- replace the optional regulator by a regulator

Yannick Fertré (2):
  dt-bindings: display: stm32: add supply property to DSI controller
  drm/stm: dsi: add support of an regulator

 .../devicetree/bindings/display/st,stm32-ltdc.txt  |  3 ++
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c              | 53 ++++++++++++++++++----
 2 files changed, 48 insertions(+), 8 deletions(-)

--
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 0/2] Add supply property for DSI controller

[Yannick Fertré]

The DSI controller needs a new property that powers its physical layer.
Binding has been updated to documented this property.
Device tree of stm32mp157c soc.
Move reg18 & reg11 to stm32mp157c device tree file.
Remove property phy-dsi-supply property to stm32mp157c-dk2.dts file.

Changes in v2:
- rename patch drm/stm: dsi: add support of an optional regulator
- rework dw_mipi_dsi-stm probe sequence

Changes in v3:
- remove device-tree patches
- replace the optional regulator by a regulator

Yannick Fertré (2):
  dt-bindings: display: stm32: add supply property to DSI controller
  drm/stm: dsi: add support of an regulator

 .../devicetree/bindings/display/st,stm32-ltdc.txt  |  3 ++
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c              | 53 ++++++++++++++++++----
 2 files changed, 48 insertions(+), 8 deletions(-)

--
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 1/2] dt-bindings: display: stm32: add supply property to DSI controller

[Yannick Fertré]

This patch adds documentation of a new property phy-dsi-supply to the
STM32 DSI controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
---
 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 3eb1b48..60c54da 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -40,6 +40,8 @@ Mandatory nodes specific to STM32 DSI:
 - panel or bridge node: A node containing the panel or bridge description as
   documented in [6].
   - port: panel or bridge port node, connected to the DSI output port (port@1).
+Optional properties:
+- phy-dsi-supply: phandle of the regulator that provides the supply voltage.
 
 Note: You can find more documentation in the following references
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -101,6 +103,7 @@ Example 2: DSI panel
 			clock-names = "pclk", "ref";
 			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
 			reset-names = "apb";
+			phy-dsi-supply = <&reg18>;
 
 			ports {
 				#address-cells = <1>;
-- 
2.7.4

[PATCH v3 1/2] dt-bindings: display: stm32: add supply property to DSI controller

[Yannick Fertré]

This patch adds documentation of a new property phy-dsi-supply to the
STM32 DSI controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
---
 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 3eb1b48..60c54da 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -40,6 +40,8 @@ Mandatory nodes specific to STM32 DSI:
 - panel or bridge node: A node containing the panel or bridge description as
   documented in [6].
   - port: panel or bridge port node, connected to the DSI output port (port@1).
+Optional properties:
+- phy-dsi-supply: phandle of the regulator that provides the supply voltage.
 
 Note: You can find more documentation in the following references
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -101,6 +103,7 @@ Example 2: DSI panel
 			clock-names = "pclk", "ref";
 			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
 			reset-names = "apb";
+			phy-dsi-supply = <&reg18>;
 
 			ports {
 				#address-cells = <1>;
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/2] dt-bindings: display: stm32: add supply property to DSI controller

[Yannick Fertré]

This patch adds documentation of a new property phy-dsi-supply to the
STM32 DSI controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
---
 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 3eb1b48..60c54da 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -40,6 +40,8 @@ Mandatory nodes specific to STM32 DSI:
 - panel or bridge node: A node containing the panel or bridge description as
   documented in [6].
   - port: panel or bridge port node, connected to the DSI output port (port@1).
+Optional properties:
+- phy-dsi-supply: phandle of the regulator that provides the supply voltage.
 
 Note: You can find more documentation in the following references
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -101,6 +103,7 @@ Example 2: DSI panel
 			clock-names = "pclk", "ref";
 			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
 			reset-names = "apb";
+			phy-dsi-supply = <&reg18>;
 
 			ports {
 				#address-cells = <1>;
-- 
2.7.4

[PATCH v3 2/2] drm/stm: dsi: add support of an regulator

[Yannick Fertré]

Add support of an regulator for the phy part of the DSI
controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
---
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 53 +++++++++++++++++++++++++++++------
 1 file changed, 45 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index 1bef73e..011e510 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -9,6 +9,7 @@
 #include <linux/clk.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
+#include <linux/regulator/consumer.h>
 #include <drm/drmP.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/bridge/dw_mipi_dsi.h>
@@ -76,6 +77,7 @@ struct dw_mipi_dsi_stm {
 	u32 hw_version;
 	int lane_min_kbps;
 	int lane_max_kbps;
+	struct regulator *vdd_supply;
 };
 
 static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
@@ -318,17 +320,31 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
 		return PTR_ERR(dsi->base);
 	}
 
+	dsi->vdd_supply = devm_regulator_get_optional(dev, "phy-dsi");
+	if (IS_ERR(dsi->vdd_supply)) {
+		ret = PTR_ERR(dsi->vdd_supply);
+		if (ret != -EPROBE_DEFER)
+			DRM_ERROR("Failed to request regulator: %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_enable(dsi->vdd_supply);
+	if (ret) {
+		DRM_ERROR("Failed to enable regulator: %d\n", ret);
+		return ret;
+	}
+
 	dsi->pllref_clk = devm_clk_get(dev, "ref");
 	if (IS_ERR(dsi->pllref_clk)) {
 		ret = PTR_ERR(dsi->pllref_clk);
-		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
-		return ret;
+		DRM_ERROR("Unable to get pll reference clock: %d\n", ret);
+		goto err_clk_get;
 	}
 
 	ret = clk_prepare_enable(dsi->pllref_clk);
 	if (ret) {
-		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
-		return ret;
+		DRM_ERROR("Failed to enable pllref_clk\n");
+		goto err_clk_get;
 	}
 
 	dw_mipi_dsi_stm_plat_data.base = dsi->base;
@@ -339,19 +355,28 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
 	dsi->dsi = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
 	if (IS_ERR(dsi->dsi)) {
 		DRM_ERROR("Failed to initialize mipi dsi host\n");
-		clk_disable_unprepare(dsi->pllref_clk);
-		return PTR_ERR(dsi->dsi);
+		ret = PTR_ERR(dsi->dsi);
+		goto err_dsi_probe;
 	}
 
 	return 0;
+
+err_dsi_probe:
+	clk_disable_unprepare(dsi->pllref_clk);
+err_clk_get:
+	regulator_disable(dsi->vdd_supply);
+
+	return ret;
+
 }
 
 static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
 {
 	struct dw_mipi_dsi_stm *dsi = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(dsi->pllref_clk);
 	dw_mipi_dsi_remove(dsi->dsi);
+	clk_disable_unprepare(dsi->pllref_clk);
+	regulator_disable(dsi->vdd_supply);
 
 	return 0;
 }
@@ -363,6 +388,7 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
 	DRM_DEBUG_DRIVER("\n");
 
 	clk_disable_unprepare(dsi->pllref_clk);
+	regulator_disable(dsi->vdd_supply);
 
 	return 0;
 }
@@ -370,10 +396,21 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
 static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev)
 {
 	struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
+	int ret;
 
 	DRM_DEBUG_DRIVER("\n");
 
-	clk_prepare_enable(dsi->pllref_clk);
+	ret = regulator_enable(dsi->vdd_supply);
+	if (ret) {
+		DRM_ERROR("Failed to enable regulator: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(dsi->pllref_clk);
+	if (ret) {
+		DRM_ERROR("Failed to enable pllref_clk\n");
+		return ret;
+	}
 
 	return 0;
 }
-- 
2.7.4

[PATCH v3 2/2] drm/stm: dsi: add support of an regulator

[Yannick Fertré]

Add support of an regulator for the phy part of the DSI
controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
---
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 53 +++++++++++++++++++++++++++++------
 1 file changed, 45 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index 1bef73e..011e510 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -9,6 +9,7 @@
 #include <linux/clk.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
+#include <linux/regulator/consumer.h>
 #include <drm/drmP.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/bridge/dw_mipi_dsi.h>
@@ -76,6 +77,7 @@ struct dw_mipi_dsi_stm {
 	u32 hw_version;
 	int lane_min_kbps;
 	int lane_max_kbps;
+	struct regulator *vdd_supply;
 };
 
 static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
@@ -318,17 +320,31 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
 		return PTR_ERR(dsi->base);
 	}
 
+	dsi->vdd_supply = devm_regulator_get_optional(dev, "phy-dsi");
+	if (IS_ERR(dsi->vdd_supply)) {
+		ret = PTR_ERR(dsi->vdd_supply);
+		if (ret != -EPROBE_DEFER)
+			DRM_ERROR("Failed to request regulator: %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_enable(dsi->vdd_supply);
+	if (ret) {
+		DRM_ERROR("Failed to enable regulator: %d\n", ret);
+		return ret;
+	}
+
 	dsi->pllref_clk = devm_clk_get(dev, "ref");
 	if (IS_ERR(dsi->pllref_clk)) {
 		ret = PTR_ERR(dsi->pllref_clk);
-		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
-		return ret;
+		DRM_ERROR("Unable to get pll reference clock: %d\n", ret);
+		goto err_clk_get;
 	}
 
 	ret = clk_prepare_enable(dsi->pllref_clk);
 	if (ret) {
-		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
-		return ret;
+		DRM_ERROR("Failed to enable pllref_clk\n");
+		goto err_clk_get;
 	}
 
 	dw_mipi_dsi_stm_plat_data.base = dsi->base;
@@ -339,19 +355,28 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
 	dsi->dsi = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
 	if (IS_ERR(dsi->dsi)) {
 		DRM_ERROR("Failed to initialize mipi dsi host\n");
-		clk_disable_unprepare(dsi->pllref_clk);
-		return PTR_ERR(dsi->dsi);
+		ret = PTR_ERR(dsi->dsi);
+		goto err_dsi_probe;
 	}
 
 	return 0;
+
+err_dsi_probe:
+	clk_disable_unprepare(dsi->pllref_clk);
+err_clk_get:
+	regulator_disable(dsi->vdd_supply);
+
+	return ret;
+
 }
 
 static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
 {
 	struct dw_mipi_dsi_stm *dsi = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(dsi->pllref_clk);
 	dw_mipi_dsi_remove(dsi->dsi);
+	clk_disable_unprepare(dsi->pllref_clk);
+	regulator_disable(dsi->vdd_supply);
 
 	return 0;
 }
@@ -363,6 +388,7 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
 	DRM_DEBUG_DRIVER("\n");
 
 	clk_disable_unprepare(dsi->pllref_clk);
+	regulator_disable(dsi->vdd_supply);
 
 	return 0;
 }
@@ -370,10 +396,21 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
 static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev)
 {
 	struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
+	int ret;
 
 	DRM_DEBUG_DRIVER("\n");
 
-	clk_prepare_enable(dsi->pllref_clk);
+	ret = regulator_enable(dsi->vdd_supply);
+	if (ret) {
+		DRM_ERROR("Failed to enable regulator: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(dsi->pllref_clk);
+	if (ret) {
+		DRM_ERROR("Failed to enable pllref_clk\n");
+		return ret;
+	}
 
 	return 0;
 }
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/2] drm/stm: dsi: add support of an regulator

[Yannick Fertré]

Add support of an regulator for the phy part of the DSI
controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
---
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 53 +++++++++++++++++++++++++++++------
 1 file changed, 45 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index 1bef73e..011e510 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -9,6 +9,7 @@
 #include <linux/clk.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
+#include <linux/regulator/consumer.h>
 #include <drm/drmP.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/bridge/dw_mipi_dsi.h>
@@ -76,6 +77,7 @@ struct dw_mipi_dsi_stm {
 	u32 hw_version;
 	int lane_min_kbps;
 	int lane_max_kbps;
+	struct regulator *vdd_supply;
 };
 
 static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
@@ -318,17 +320,31 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
 		return PTR_ERR(dsi->base);
 	}
 
+	dsi->vdd_supply = devm_regulator_get_optional(dev, "phy-dsi");
+	if (IS_ERR(dsi->vdd_supply)) {
+		ret = PTR_ERR(dsi->vdd_supply);
+		if (ret != -EPROBE_DEFER)
+			DRM_ERROR("Failed to request regulator: %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_enable(dsi->vdd_supply);
+	if (ret) {
+		DRM_ERROR("Failed to enable regulator: %d\n", ret);
+		return ret;
+	}
+
 	dsi->pllref_clk = devm_clk_get(dev, "ref");
 	if (IS_ERR(dsi->pllref_clk)) {
 		ret = PTR_ERR(dsi->pllref_clk);
-		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
-		return ret;
+		DRM_ERROR("Unable to get pll reference clock: %d\n", ret);
+		goto err_clk_get;
 	}
 
 	ret = clk_prepare_enable(dsi->pllref_clk);
 	if (ret) {
-		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
-		return ret;
+		DRM_ERROR("Failed to enable pllref_clk\n");
+		goto err_clk_get;
 	}
 
 	dw_mipi_dsi_stm_plat_data.base = dsi->base;
@@ -339,19 +355,28 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
 	dsi->dsi = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
 	if (IS_ERR(dsi->dsi)) {
 		DRM_ERROR("Failed to initialize mipi dsi host\n");
-		clk_disable_unprepare(dsi->pllref_clk);
-		return PTR_ERR(dsi->dsi);
+		ret = PTR_ERR(dsi->dsi);
+		goto err_dsi_probe;
 	}
 
 	return 0;
+
+err_dsi_probe:
+	clk_disable_unprepare(dsi->pllref_clk);
+err_clk_get:
+	regulator_disable(dsi->vdd_supply);
+
+	return ret;
+
 }
 
 static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
 {
 	struct dw_mipi_dsi_stm *dsi = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(dsi->pllref_clk);
 	dw_mipi_dsi_remove(dsi->dsi);
+	clk_disable_unprepare(dsi->pllref_clk);
+	regulator_disable(dsi->vdd_supply);
 
 	return 0;
 }
@@ -363,6 +388,7 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
 	DRM_DEBUG_DRIVER("\n");
 
 	clk_disable_unprepare(dsi->pllref_clk);
+	regulator_disable(dsi->vdd_supply);
 
 	return 0;
 }
@@ -370,10 +396,21 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
 static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev)
 {
 	struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
+	int ret;
 
 	DRM_DEBUG_DRIVER("\n");
 
-	clk_prepare_enable(dsi->pllref_clk);
+	ret = regulator_enable(dsi->vdd_supply);
+	if (ret) {
+		DRM_ERROR("Failed to enable regulator: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(dsi->pllref_clk);
+	if (ret) {
+		DRM_ERROR("Failed to enable pllref_clk\n");
+		return ret;
+	}
 
 	return 0;
 }
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel