From: Oliver Graute <oliver.graute@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: oliver.graute@gmail.com, narmstrong@baylibre.com, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCHv3 2/2] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard Date: Thu, 6 Jun 2019 18:47:02 +0200 [thread overview] Message-ID: <1559839624-12286-3-git-send-email-oliver.graute@gmail.com> (raw) In-Reply-To: <1559839624-12286-1-git-send-email-oliver.graute@gmail.com> This patch adds DeviceTree Bindings for the i.MX6 UltraLite DART NAND/WIFI Signed-off-by: Oliver Graute <oliver.graute@gmail.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts | 209 ++++++++++++++++++++++++ 2 files changed, 210 insertions(+) create mode 100644 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5559028..7f03ab5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -577,6 +577,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ + imx6ul-var-6ulcustomboard.dtb \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ diff --git a/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts new file mode 100644 index 0000000..80b860a --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Support for Variscite DART-6UL Module + * + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright (C) 2015-2016 Variscite Ltd. - http://www.variscite.com + * Copyright (C) 2018-2019 Oliver Graute <oliver.graute@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "imx6ul-imx6ull-var-dart-common.dtsi" + +/ { + model = "Variscite i.MX6 UltraLite Carrier-board"; + compatible = "fsl,6ulcustomboard", "fsl,imx6ul"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 20000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user { + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + d16_led { + gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8731audio"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Jack", + "Microphone", "Mic Jack"; + simple-audio-card,routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line Jack", + "RLINEIN", "Line Jack", + "MICIN", "Mic Bias", + "Mic Bias", "Mic Jack"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + sound_master: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&gpc { + fsl,cpu_pupscr_sw2iso = <0x2>; + fsl,cpu_pupscr_sw = <0x1>; + fsl,cpu_pdnscr_iso2sw = <0x1>; + fsl,cpu_pdnscr_iso = <0x1>; + fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */ +}; + +&fec1 { + status = "okay"; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy0>; +}; + +&fec2 { + status = "okay"; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + wm8731: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8731"; + reg = <0x1a>; + clocks = <&clks IMX6UL_CLK_SAI2>; + clock-names = "mclk"; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio3>; + interrupts = <4 0>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency =<35000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <48>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1>; + imx6ul-evk { + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 + >; + }; + }; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Oliver Graute <oliver.graute@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, narmstrong@baylibre.com, Fabio Estevam <festevam@gmail.com>, Sascha Hauer <s.hauer@pengutronix.de>, linux-kernel@vger.kernel.org, oliver.graute@gmail.com, Rob Herring <robh+dt@kernel.org>, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, Shawn Guo <shawnguo@kernel.org> Subject: [PATCHv3 2/2] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard Date: Thu, 6 Jun 2019 18:47:02 +0200 [thread overview] Message-ID: <1559839624-12286-3-git-send-email-oliver.graute@gmail.com> (raw) In-Reply-To: <1559839624-12286-1-git-send-email-oliver.graute@gmail.com> This patch adds DeviceTree Bindings for the i.MX6 UltraLite DART NAND/WIFI Signed-off-by: Oliver Graute <oliver.graute@gmail.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts | 209 ++++++++++++++++++++++++ 2 files changed, 210 insertions(+) create mode 100644 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5559028..7f03ab5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -577,6 +577,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ + imx6ul-var-6ulcustomboard.dtb \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ diff --git a/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts new file mode 100644 index 0000000..80b860a --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Support for Variscite DART-6UL Module + * + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright (C) 2015-2016 Variscite Ltd. - http://www.variscite.com + * Copyright (C) 2018-2019 Oliver Graute <oliver.graute@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "imx6ul-imx6ull-var-dart-common.dtsi" + +/ { + model = "Variscite i.MX6 UltraLite Carrier-board"; + compatible = "fsl,6ulcustomboard", "fsl,imx6ul"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 20000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user { + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + d16_led { + gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8731audio"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Jack", + "Microphone", "Mic Jack"; + simple-audio-card,routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line Jack", + "RLINEIN", "Line Jack", + "MICIN", "Mic Bias", + "Mic Bias", "Mic Jack"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + sound_master: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&gpc { + fsl,cpu_pupscr_sw2iso = <0x2>; + fsl,cpu_pupscr_sw = <0x1>; + fsl,cpu_pdnscr_iso2sw = <0x1>; + fsl,cpu_pdnscr_iso = <0x1>; + fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */ +}; + +&fec1 { + status = "okay"; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy0>; +}; + +&fec2 { + status = "okay"; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + wm8731: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8731"; + reg = <0x1a>; + clocks = <&clks IMX6UL_CLK_SAI2>; + clock-names = "mclk"; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio3>; + interrupts = <4 0>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency =<35000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <48>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1>; + imx6ul-evk { + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 + >; + }; + }; +}; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-06 16:51 UTC|newest] Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-06-06 16:47 [PATCHv3 0/2] Variscite DART-6UL SoM support Oliver Graute 2019-06-06 16:47 ` Oliver Graute 2019-06-06 16:47 ` [PATCHv3 1/2] ARM: dts: imx6ul: Add " Oliver Graute 2019-06-06 16:47 ` Oliver Graute 2019-06-13 2:02 ` Shawn Guo 2019-06-13 2:02 ` Shawn Guo 2019-06-13 2:02 ` Shawn Guo 2019-06-06 16:47 ` Oliver Graute [this message] 2019-06-06 16:47 ` [PATCHv3 2/2] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard Oliver Graute 2019-06-13 2:32 ` Shawn Guo 2019-06-13 2:32 ` Shawn Guo 2019-06-13 2:32 ` Shawn Guo 2019-06-13 1:38 ` [PATCHv3 0/2] Variscite DART-6UL SoM support Shawn Guo 2019-06-13 1:38 ` Shawn Guo 2019-06-13 1:38 ` Shawn Guo 2019-07-03 16:46 ` Oliver Graute 2019-07-03 16:46 ` Oliver Graute
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1559839624-12286-3-git-send-email-oliver.graute@gmail.com \ --to=oliver.graute@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=narmstrong@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.