All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tamizh chelvam <tamizhr@codeaurora.org>
To: johannes@sipsolutions.net, ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Tamizh chelvam <tamizhr@codeaurora.org>
Subject: [PATCHv6 5/9] nl80211: Add netlink attribute to configure TID specific tx rate
Date: Tue, 18 Jun 2019 10:57:08 +0530	[thread overview]
Message-ID: <1560835632-17405-6-git-send-email-tamizhr@codeaurora.org> (raw)
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>

Introduce NL80211_TID_ATTR_CONFIG_TX_RATES in nl80211_tid_attr_config
to accept data TID specific TX bitrate configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
this configuration is to be applied is passed in
NL80211_TID_ATTR_CONFIG_TID attribute. TX bitrate mask values passed
in NL80211_ATTR_TX_RATES attribute and NL80211_TID_ATTR_CONFIG_TX_RATES
attribute will have types of the TX rate should be applied.
When the user-space wants this configuration peer specific
rather than being applied for all the connected stations,
MAC address of the peer can be passed in NL80211_ATTR_MAC attribute.

Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per-STA data TID
TX bitrate configuration should advertise
NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
 include/net/cfg80211.h       |    5 +++
 include/uapi/linux/nl80211.h |   39 +++++++++++++++++++++
 net/wireless/nl80211.c       |   77 ++++++++++++++++++++++++++++++++++++++----
 3 files changed, 115 insertions(+), 6 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1b875d8..4bc6eb7 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -530,6 +530,7 @@ enum ieee80211_tid_conf_mask {
 	IEEE80211_TID_CONF_RETRY	= BIT(1),
 	IEEE80211_TID_CONF_AMPDU	= BIT(2),
 	IEEE80211_TID_CONF_RTSCTS	= BIT(3),
+	IEEE80211_TID_CONF_TX_BITRATE	= BIT(4),
 };
 
 /**
@@ -542,6 +543,8 @@ enum ieee80211_tid_conf_mask {
  * @retry_short: retry count value
  * @ampdu: Enable/Disable aggregation
  * @rtscts: Enable/Disable RTS/CTS
+ * @txrate_type: TX bitrate mask type
+ * @mask: bitrate to be applied for the TID
  */
 struct ieee80211_tid_cfg {
 	u8 tid;
@@ -551,6 +554,8 @@ struct ieee80211_tid_cfg {
 	int retry_short;
 	u8 ampdu;
 	u8 rtscts;
+	enum nl80211_tx_rate_setting txrate_type;
+	struct cfg80211_bitrate_mask *mask;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index df4e07d..04f253d 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4649,6 +4649,18 @@ enum nl80211_tx_power_setting {
 };
 
 /**
+ * enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+	NL80211_TX_RATE_AUTOMATIC,
+	NL80211_TX_RATE_LIMITED,
+	NL80211_TX_RATE_FIXED,
+};
+
+/**
  * enum nl80211_tid_config - TID config state
  * @NL80211_TID_CONFIG_DEFAULT: Default config for the TID
  * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
@@ -4742,6 +4754,25 @@ enum nl80211_tid_config {
  *	NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
  *	RTS_CTS configuration should advertise
  *	NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
+ * @NL80211_TID_ATTR_CONFIG_TX_RATES: Data frame TX rate mask should be applied
+ *	with the parameters passed through %NL80211_ATTR_TX_RATES. This
+ *	configuration is per TID, TID is specified with
+ *	%NL80211_TID_ATTR_CONFIG_TID.
+ *	If the peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ *	configuration is applied to the data frame for the tid to that connected
+ *	station. This attribute will be useful to notfiy the driver that what
+ *	type of txrate should be applied(%enum enum nl80211_tx_rate_setting)
+ *	for the connected station (%NL80211_ATTR_MAC),
+ *	Station specific retry configuration is valid only for STA's
+ *	current connection. i.e. the configuration will be reset to default when
+ *	the station connects back after disconnection/roaming.
+ *	when user-space does not include %NL80211_ATTR_MAC, this configuration
+ *	should be treated as per-netdev configuration. This configuration will
+ *	be cleared when the interface goes down and on the disconnection from a
+ *	BSS. Driver supporting this feature should advertise
+ *	NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per station
+ *	TX bitrate configuration should advertise
+ *	NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
  */
 enum nl80211_tid_attr_config {
 	__NL80211_TID_ATTR_INVALID,
@@ -4752,6 +4783,8 @@ enum nl80211_tid_attr_config {
 	NL80211_TID_ATTR_CONFIG_RETRY_LONG,
 	NL80211_TID_ATTR_CONFIG_AMPDU_CTRL,
 	NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL,
+	NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE,
+	NL80211_TID_ATTR_CONFIG_TX_RATES,
 
 	/* keep last */
 	__NL80211_TID_ATTR_CONFIG_AFTER_LAST,
@@ -5585,6 +5618,10 @@ enum nl80211_feature_flags {
  *	RTS_CTS control(enable/disable).
  * @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
  *	RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK: Driver supports TID specific
+ *	TX bitrate configuration.
+ * @NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK: Driver supports STA specific
+ *	TX bitrate configuration.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5639,6 +5676,8 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
 	NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
 	NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
+	NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK,
+	NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 370c483..a1a8c48 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -281,6 +281,15 @@ static int validate_ie_attr(const struct nlattr *attr,
 		NLA_POLICY_NESTED_ARRAY(nl80211_psmr_peer_attr_policy),
 };
 
+static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
+	[NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
+				    .len = NL80211_MAX_SUPP_RATES },
+	[NL80211_TXRATE_HT] = { .type = NLA_BINARY,
+				.len = NL80211_MAX_SUPP_HT_RATES },
+	[NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
+	[NL80211_TXRATE_GI] = { .type = NLA_U8 },
+};
+
 static const struct nla_policy
 nl80211_tid_attr_config_policy[NL80211_TID_ATTR_CONFIG_MAX + 1] = {
 	[NL80211_TID_ATTR_CONFIG_TID] = { .type = NLA_U8 },
@@ -293,6 +302,10 @@ static int validate_ie_attr(const struct nlattr *attr,
 			NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
 	[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL] =
 			NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+	[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE] =
+			NLA_POLICY_MAX(NLA_U8, NL80211_TX_RATE_FIXED),
+	[NL80211_TID_ATTR_CONFIG_TX_RATES] =
+			NLA_POLICY_NESTED(nl80211_txattr_policy),
 };
 
 const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -4147,14 +4160,14 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
 	}
 
 	/* if no rates are given set it back to the defaults */
-	if (!info->attrs[NL80211_ATTR_TX_RATES])
+	if (!attrs[attr])
 		goto out;
 
 	/* The nested attribute uses enum nl80211_band as the index. This maps
 	 * directly to the enum nl80211_band values used in cfg80211.
 	 */
 	BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
-	nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
+	nla_for_each_nested(tx_rates, attrs[attr], rem) {
 		enum nl80211_band band = nla_type(tx_rates);
 		int err;
 
@@ -4602,7 +4615,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		return -EINVAL;
 
 	if (info->attrs[NL80211_ATTR_TX_RATES]) {
-		err = nl80211_parse_tx_bitrate_mask(info, &params.beacon_rate);
+		err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+						    NL80211_ATTR_TX_RATES,
+						    &params.beacon_rate);
 		if (err)
 			return err;
 
@@ -10309,7 +10324,8 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
 	if (!rdev->ops->set_bitrate_mask)
 		return -EOPNOTSUPP;
 
-	err = nl80211_parse_tx_bitrate_mask(info, &mask);
+	err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+					    NL80211_ATTR_TX_RATES, &mask);
 	if (err)
 		return err;
 
@@ -10902,7 +10918,9 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (info->attrs[NL80211_ATTR_TX_RATES]) {
-		err = nl80211_parse_tx_bitrate_mask(info, &setup.beacon_rate);
+		err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+						    NL80211_ATTR_TX_RATES,
+						    &setup.beacon_rate);
 		if (err)
 			return err;
 
@@ -13598,6 +13616,7 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 			  struct genl_info *info, const u8 *peer)
 {
 	struct netlink_ext_ack *extack = info->extack;
+	int ret;
 
 	tid_conf->tid = nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_TID]);
 	if (attrs[NL80211_TID_ATTR_CONFIG_NOACK]) {
@@ -13713,6 +13732,52 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 			nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL]);
 	}
 
+	if (attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE]) {
+		int idx;
+		enum nl80211_attrs attr;
+
+		if (!wiphy_ext_feature_isset(&rdev->wiphy,
+				NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK)) {
+			NL_SET_ERR_MSG_ATTR(extack,
+					    attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE],
+					    "TID specific configuration not "
+					    "supported");
+			return -EOPNOTSUPP;
+		}
+
+		if (peer &&
+		    !wiphy_ext_feature_isset(&rdev->wiphy,
+				NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK)) {
+			NL_SET_ERR_MSG_ATTR(extack,
+					    attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE],
+					    "peer specfic TID configuration not "
+					    "supported");
+			return -EOPNOTSUPP;
+		}
+
+		idx = NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE;
+		tid_conf->txrate_type = nla_get_u8(attrs[idx]);
+
+		tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_TX_BITRATE;
+		if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
+			tid_conf->mask =
+				kzalloc(sizeof(struct cfg80211_bitrate_mask),
+					GFP_KERNEL);
+			if (!tid_conf->mask)
+				return -ENOMEM;
+
+			attr = NL80211_TID_ATTR_CONFIG_TX_RATES;
+			ret = nl80211_parse_tx_bitrate_mask(info, attrs, attr,
+							    tid_conf->mask);
+			if (ret) {
+				kfree(tid_conf->mask);
+				return ret;
+			}
+		} else {
+			tid_conf->mask = NULL;
+		}
+	}
+
 	return 0;
 }
 
@@ -13763,7 +13828,7 @@ static int nl80211_set_tid_config(struct sk_buff *skb,
 
 		ret = parse_tid_conf(rdev, attrs,
 				     &tid_config->tid_conf[conf_idx],
-				     tid_config->peer);
+				     info, tid_config->peer);
 		if (ret)
 			goto bad_tid_conf;
 
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: Tamizh chelvam <tamizhr@codeaurora.org>
To: johannes@sipsolutions.net, ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Tamizh chelvam <tamizhr@codeaurora.org>
Subject: [PATCHv6 5/9] nl80211: Add netlink attribute to configure TID specific tx rate
Date: Tue, 18 Jun 2019 10:57:08 +0530	[thread overview]
Message-ID: <1560835632-17405-6-git-send-email-tamizhr@codeaurora.org> (raw)
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>

Introduce NL80211_TID_ATTR_CONFIG_TX_RATES in nl80211_tid_attr_config
to accept data TID specific TX bitrate configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
this configuration is to be applied is passed in
NL80211_TID_ATTR_CONFIG_TID attribute. TX bitrate mask values passed
in NL80211_ATTR_TX_RATES attribute and NL80211_TID_ATTR_CONFIG_TX_RATES
attribute will have types of the TX rate should be applied.
When the user-space wants this configuration peer specific
rather than being applied for all the connected stations,
MAC address of the peer can be passed in NL80211_ATTR_MAC attribute.

Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per-STA data TID
TX bitrate configuration should advertise
NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
 include/net/cfg80211.h       |    5 +++
 include/uapi/linux/nl80211.h |   39 +++++++++++++++++++++
 net/wireless/nl80211.c       |   77 ++++++++++++++++++++++++++++++++++++++----
 3 files changed, 115 insertions(+), 6 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1b875d8..4bc6eb7 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -530,6 +530,7 @@ enum ieee80211_tid_conf_mask {
 	IEEE80211_TID_CONF_RETRY	= BIT(1),
 	IEEE80211_TID_CONF_AMPDU	= BIT(2),
 	IEEE80211_TID_CONF_RTSCTS	= BIT(3),
+	IEEE80211_TID_CONF_TX_BITRATE	= BIT(4),
 };
 
 /**
@@ -542,6 +543,8 @@ enum ieee80211_tid_conf_mask {
  * @retry_short: retry count value
  * @ampdu: Enable/Disable aggregation
  * @rtscts: Enable/Disable RTS/CTS
+ * @txrate_type: TX bitrate mask type
+ * @mask: bitrate to be applied for the TID
  */
 struct ieee80211_tid_cfg {
 	u8 tid;
@@ -551,6 +554,8 @@ struct ieee80211_tid_cfg {
 	int retry_short;
 	u8 ampdu;
 	u8 rtscts;
+	enum nl80211_tx_rate_setting txrate_type;
+	struct cfg80211_bitrate_mask *mask;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index df4e07d..04f253d 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4649,6 +4649,18 @@ enum nl80211_tx_power_setting {
 };
 
 /**
+ * enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+	NL80211_TX_RATE_AUTOMATIC,
+	NL80211_TX_RATE_LIMITED,
+	NL80211_TX_RATE_FIXED,
+};
+
+/**
  * enum nl80211_tid_config - TID config state
  * @NL80211_TID_CONFIG_DEFAULT: Default config for the TID
  * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
@@ -4742,6 +4754,25 @@ enum nl80211_tid_config {
  *	NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
  *	RTS_CTS configuration should advertise
  *	NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
+ * @NL80211_TID_ATTR_CONFIG_TX_RATES: Data frame TX rate mask should be applied
+ *	with the parameters passed through %NL80211_ATTR_TX_RATES. This
+ *	configuration is per TID, TID is specified with
+ *	%NL80211_TID_ATTR_CONFIG_TID.
+ *	If the peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ *	configuration is applied to the data frame for the tid to that connected
+ *	station. This attribute will be useful to notfiy the driver that what
+ *	type of txrate should be applied(%enum enum nl80211_tx_rate_setting)
+ *	for the connected station (%NL80211_ATTR_MAC),
+ *	Station specific retry configuration is valid only for STA's
+ *	current connection. i.e. the configuration will be reset to default when
+ *	the station connects back after disconnection/roaming.
+ *	when user-space does not include %NL80211_ATTR_MAC, this configuration
+ *	should be treated as per-netdev configuration. This configuration will
+ *	be cleared when the interface goes down and on the disconnection from a
+ *	BSS. Driver supporting this feature should advertise
+ *	NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per station
+ *	TX bitrate configuration should advertise
+ *	NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
  */
 enum nl80211_tid_attr_config {
 	__NL80211_TID_ATTR_INVALID,
@@ -4752,6 +4783,8 @@ enum nl80211_tid_attr_config {
 	NL80211_TID_ATTR_CONFIG_RETRY_LONG,
 	NL80211_TID_ATTR_CONFIG_AMPDU_CTRL,
 	NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL,
+	NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE,
+	NL80211_TID_ATTR_CONFIG_TX_RATES,
 
 	/* keep last */
 	__NL80211_TID_ATTR_CONFIG_AFTER_LAST,
@@ -5585,6 +5618,10 @@ enum nl80211_feature_flags {
  *	RTS_CTS control(enable/disable).
  * @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
  *	RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK: Driver supports TID specific
+ *	TX bitrate configuration.
+ * @NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK: Driver supports STA specific
+ *	TX bitrate configuration.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5639,6 +5676,8 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
 	NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
 	NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
+	NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK,
+	NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 370c483..a1a8c48 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -281,6 +281,15 @@ static int validate_ie_attr(const struct nlattr *attr,
 		NLA_POLICY_NESTED_ARRAY(nl80211_psmr_peer_attr_policy),
 };
 
+static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
+	[NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
+				    .len = NL80211_MAX_SUPP_RATES },
+	[NL80211_TXRATE_HT] = { .type = NLA_BINARY,
+				.len = NL80211_MAX_SUPP_HT_RATES },
+	[NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
+	[NL80211_TXRATE_GI] = { .type = NLA_U8 },
+};
+
 static const struct nla_policy
 nl80211_tid_attr_config_policy[NL80211_TID_ATTR_CONFIG_MAX + 1] = {
 	[NL80211_TID_ATTR_CONFIG_TID] = { .type = NLA_U8 },
@@ -293,6 +302,10 @@ static int validate_ie_attr(const struct nlattr *attr,
 			NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
 	[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL] =
 			NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+	[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE] =
+			NLA_POLICY_MAX(NLA_U8, NL80211_TX_RATE_FIXED),
+	[NL80211_TID_ATTR_CONFIG_TX_RATES] =
+			NLA_POLICY_NESTED(nl80211_txattr_policy),
 };
 
 const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -4147,14 +4160,14 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
 	}
 
 	/* if no rates are given set it back to the defaults */
-	if (!info->attrs[NL80211_ATTR_TX_RATES])
+	if (!attrs[attr])
 		goto out;
 
 	/* The nested attribute uses enum nl80211_band as the index. This maps
 	 * directly to the enum nl80211_band values used in cfg80211.
 	 */
 	BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
-	nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
+	nla_for_each_nested(tx_rates, attrs[attr], rem) {
 		enum nl80211_band band = nla_type(tx_rates);
 		int err;
 
@@ -4602,7 +4615,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		return -EINVAL;
 
 	if (info->attrs[NL80211_ATTR_TX_RATES]) {
-		err = nl80211_parse_tx_bitrate_mask(info, &params.beacon_rate);
+		err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+						    NL80211_ATTR_TX_RATES,
+						    &params.beacon_rate);
 		if (err)
 			return err;
 
@@ -10309,7 +10324,8 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
 	if (!rdev->ops->set_bitrate_mask)
 		return -EOPNOTSUPP;
 
-	err = nl80211_parse_tx_bitrate_mask(info, &mask);
+	err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+					    NL80211_ATTR_TX_RATES, &mask);
 	if (err)
 		return err;
 
@@ -10902,7 +10918,9 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (info->attrs[NL80211_ATTR_TX_RATES]) {
-		err = nl80211_parse_tx_bitrate_mask(info, &setup.beacon_rate);
+		err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+						    NL80211_ATTR_TX_RATES,
+						    &setup.beacon_rate);
 		if (err)
 			return err;
 
@@ -13598,6 +13616,7 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 			  struct genl_info *info, const u8 *peer)
 {
 	struct netlink_ext_ack *extack = info->extack;
+	int ret;
 
 	tid_conf->tid = nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_TID]);
 	if (attrs[NL80211_TID_ATTR_CONFIG_NOACK]) {
@@ -13713,6 +13732,52 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 			nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL]);
 	}
 
+	if (attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE]) {
+		int idx;
+		enum nl80211_attrs attr;
+
+		if (!wiphy_ext_feature_isset(&rdev->wiphy,
+				NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK)) {
+			NL_SET_ERR_MSG_ATTR(extack,
+					    attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE],
+					    "TID specific configuration not "
+					    "supported");
+			return -EOPNOTSUPP;
+		}
+
+		if (peer &&
+		    !wiphy_ext_feature_isset(&rdev->wiphy,
+				NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK)) {
+			NL_SET_ERR_MSG_ATTR(extack,
+					    attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE],
+					    "peer specfic TID configuration not "
+					    "supported");
+			return -EOPNOTSUPP;
+		}
+
+		idx = NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE;
+		tid_conf->txrate_type = nla_get_u8(attrs[idx]);
+
+		tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_TX_BITRATE;
+		if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
+			tid_conf->mask =
+				kzalloc(sizeof(struct cfg80211_bitrate_mask),
+					GFP_KERNEL);
+			if (!tid_conf->mask)
+				return -ENOMEM;
+
+			attr = NL80211_TID_ATTR_CONFIG_TX_RATES;
+			ret = nl80211_parse_tx_bitrate_mask(info, attrs, attr,
+							    tid_conf->mask);
+			if (ret) {
+				kfree(tid_conf->mask);
+				return ret;
+			}
+		} else {
+			tid_conf->mask = NULL;
+		}
+	}
+
 	return 0;
 }
 
@@ -13763,7 +13828,7 @@ static int nl80211_set_tid_config(struct sk_buff *skb,
 
 		ret = parse_tid_conf(rdev, attrs,
 				     &tid_config->tid_conf[conf_idx],
-				     tid_config->peer);
+				     info, tid_config->peer);
 		if (ret)
 			goto bad_tid_conf;
 
-- 
1.7.9.5


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2019-06-18  6:47 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-18  5:27 [PATCHv6 0/9] cfg80211/mac80211: Add support for TID specific configuration Tamizh chelvam
2019-06-18  5:27 ` Tamizh chelvam
2019-06-18  5:27 ` [PATCHv6 1/9] nl80211: New netlink command " Tamizh chelvam
2019-06-18  5:27   ` Tamizh chelvam
2019-07-11 12:51   ` Sergey Matyukevich
2019-07-11 12:51     ` Sergey Matyukevich
2019-07-31 10:04     ` Tamizh chelvam
2019-07-31 10:04       ` Tamizh chelvam
2019-07-11 13:13   ` Sergey Matyukevich
2019-07-11 13:13     ` Sergey Matyukevich
2019-07-31  9:19   ` Johannes Berg
2019-07-31  9:19     ` Johannes Berg
2019-07-31 10:28     ` Tamizh chelvam
2019-07-31 10:28       ` Tamizh chelvam
2019-07-31  9:25   ` Johannes Berg
2019-07-31  9:25     ` Johannes Berg
2019-08-10 12:40     ` Tamizh chelvam
2019-08-10 12:40       ` Tamizh chelvam
2019-08-21  7:42       ` Johannes Berg
2019-08-21  7:42         ` Johannes Berg
2019-06-18  5:27 ` [PATCHv6 2/9] nl80211: Add new netlink attribute for TID speicific retry count Tamizh chelvam
2019-06-18  5:27   ` Tamizh chelvam
2019-07-31  9:24   ` Johannes Berg
2019-07-31  9:24     ` Johannes Berg
2019-08-10 12:06     ` Tamizh chelvam
2019-08-10 12:06       ` Tamizh chelvam
2019-08-21  7:41       ` Johannes Berg
2019-08-21  7:41         ` Johannes Berg
2019-06-18  5:27 ` [PATCHv6 3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable Tamizh chelvam
2019-06-18  5:27   ` Tamizh chelvam
2019-07-31  9:28   ` Johannes Berg
2019-07-31  9:28     ` Johannes Berg
2019-08-10 12:41     ` Tamizh chelvam
2019-08-10 12:41       ` Tamizh chelvam
2019-06-18  5:27 ` [PATCHv6 4/9] nl80211: Add netlink attribute to enable/disable RTS_CTS Tamizh chelvam
2019-06-18  5:27   ` Tamizh chelvam
2019-06-18  5:27 ` Tamizh chelvam [this message]
2019-06-18  5:27   ` [PATCHv6 5/9] nl80211: Add netlink attribute to configure TID specific tx rate Tamizh chelvam
2019-07-11 12:54   ` Sergey Matyukevich
2019-07-11 12:54     ` Sergey Matyukevich
2019-07-31 10:08     ` Tamizh chelvam
2019-07-31 10:08       ` Tamizh chelvam
2019-07-31  9:32   ` Johannes Berg
2019-07-31  9:32     ` Johannes Berg
2019-06-18  5:27 ` [PATCHv6 6/9] mac80211: Add api to support configuring TID specific configuration Tamizh chelvam
2019-06-18  5:27   ` Tamizh chelvam
2019-07-31  9:34   ` Johannes Berg
2019-07-31  9:34     ` Johannes Berg
2019-06-18  5:27 ` [PATCHv6 7/9] ath10k: Add wmi command support for station specific TID config Tamizh chelvam
2019-06-18  5:27   ` Tamizh chelvam
2019-06-18  5:27 ` [PATCHv6 8/9] ath10k: Add new api to support TID specific configuration Tamizh chelvam
2019-06-18  5:27   ` Tamizh chelvam
2019-06-18  5:27 ` [PATCHv6 9/9] ath10k: Add extended TID configuration support Tamizh chelvam
2019-06-18  5:27   ` Tamizh chelvam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560835632-17405-6-git-send-email-tamizhr@codeaurora.org \
    --to=tamizhr@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.