From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, martyn.welch@collabora.com,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com
Subject: [PATCH 06/10] ARM: dts: imx6ul: segin: Only enable NAND if it is populated
Date: Tue, 9 Jul 2019 09:19:23 +0200 [thread overview]
Message-ID: <1562656767-273566-7-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1562656767-273566-1-git-send-email-s.riedmueller@phytec.de>
The phyCORE-i.MX 6UL/ULL now comes either with NAND flash or eMMC. We
have to configure the populated memory type in the device tree files. So
the GPMI node gets disabled by default and only enabled if populated.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi | 2 +-
arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 4 ++++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index fee7a7e938ee..de6ffbb0183c 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -65,7 +65,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
- status = "okay";
+ status = "disabled";
};
&i2c1 {
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index 81a82dd65019..c6ef13685a7c 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -50,6 +50,10 @@
status = "okay";
};
+&gpmi {
+ status = "okay";
+};
+
&i2c_rtc {
status = "okay";
};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, martyn.welch@collabora.com,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, festevam@gmail.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/10] ARM: dts: imx6ul: segin: Only enable NAND if it is populated
Date: Tue, 9 Jul 2019 09:19:23 +0200 [thread overview]
Message-ID: <1562656767-273566-7-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1562656767-273566-1-git-send-email-s.riedmueller@phytec.de>
The phyCORE-i.MX 6UL/ULL now comes either with NAND flash or eMMC. We
have to configure the populated memory type in the device tree files. So
the GPMI node gets disabled by default and only enabled if populated.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi | 2 +-
arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 4 ++++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index fee7a7e938ee..de6ffbb0183c 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -65,7 +65,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
- status = "okay";
+ status = "disabled";
};
&i2c1 {
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index 81a82dd65019..c6ef13685a7c 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -50,6 +50,10 @@
status = "okay";
};
+&gpmi {
+ status = "okay";
+};
+
&i2c_rtc {
status = "okay";
};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, martyn.welch@collabora.com,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, festevam@gmail.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/10] ARM: dts: imx6ul: segin: Only enable NAND if it is populated
Date: Tue, 9 Jul 2019 09:19:23 +0200 [thread overview]
Message-ID: <1562656767-273566-7-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1562656767-273566-1-git-send-email-s.riedmueller@phytec.de>
The phyCORE-i.MX 6UL/ULL now comes either with NAND flash or eMMC. We
have to configure the populated memory type in the device tree files. So
the GPMI node gets disabled by default and only enabled if populated.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi | 2 +-
arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 4 ++++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index fee7a7e938ee..de6ffbb0183c 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -65,7 +65,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
- status = "okay";
+ status = "disabled";
};
&i2c1 {
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index 81a82dd65019..c6ef13685a7c 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -50,6 +50,10 @@
status = "okay";
};
+&gpmi {
+ status = "okay";
+};
+
&i2c_rtc {
status = "okay";
};
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-09 7:35 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-09 7:19 [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 01/10] ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 02/10] ARM: dts: imx6ul: segin: Add boot media to dts filename Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-23 3:10 ` Shawn Guo
2019-07-23 3:10 ` Shawn Guo
2019-07-09 7:19 ` [PATCH 03/10] ARM: dts: imx6ul: segin: Reduce eth drive strength Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01 Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 05/10] ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller [this message]
2019-07-09 7:19 ` [PATCH 06/10] ARM: dts: imx6ul: segin: Only enable NAND if it is populated Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 07/10] ARM: dts: imx6ul: phycore: Add eMMC at usdhc2 Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 08/10] ARM: dts: imx6ul: segin: Move ECSPI interface to board include file Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 09/10] ARM: dts: imx6ul: segin: Move machine include to dts files Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 10/10] ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX 6ULL Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-23 5:39 ` [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Shawn Guo
2019-07-23 5:39 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562656767-273566-7-git-send-email-s.riedmueller@phytec.de \
--to=s.riedmueller@phytec.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martyn.welch@collabora.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.