All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Matthias Brugger <mbrugger@suse.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	linux-rpi-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
	linux-mmc@vger.kernel.org, Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH 05/18] ARM: dts: bcm283x: Define memory at board level
Date: Mon, 22 Jul 2019 07:54:36 +0200	[thread overview]
Message-ID: <1563774880-8061-6-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1563774880-8061-1-git-send-email-wahrenst@gmx.net>

Now with the varity of several RPi boards, the memory should be defined
at board level. This step gives us the chance to fix the memory size
of the RPi 1 B+, Zero (incl. W) and Compute Module 1.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-a.dts        | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-b.dts        | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi     | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-zero.dts     | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi.dtsi         | 5 -----
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts      | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 1 +
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi     | 1 +
 14 files changed, 45 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index cb3f08d..5b42e9a 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -8,6 +8,11 @@
 	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
 	model = "Raspberry Pi Model A+";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 2d167d9..b716214 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -8,6 +8,11 @@
 	compatible = "raspberrypi,model-a", "brcm,bcm2835";
 	model = "Raspberry Pi Model A";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 83a3a60..3318082 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
 	model = "Raspberry Pi Model B+";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index b6b4fea..97d7eb5 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
 	model = "Raspberry Pi Model B rev2";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index b5782fa..37e02a1 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
 	model = "Raspberry Pi Model B";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index ef22c2d..58059c2 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -10,6 +10,11 @@
 		};
 	};

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 5ecc403..f38f388 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -12,6 +12,11 @@
 	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
 	model = "Raspberry Pi Zero W";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	chosen {
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 84c7035..5fd0686 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -12,6 +12,11 @@
 	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
 	model = "Raspberry Pi Zero";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 40bac52e..f5125b7 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,11 +1,6 @@
 #include <dt-bindings/power/raspberrypi-power.h>

 / {
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-
 	leds {
 		compatible = "gpio-leds";

diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index f97ec95..6a89999 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -10,6 +10,7 @@
 	model = "Raspberry Pi 2 Model B";

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 7f4437a..0e29aaa 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -14,6 +14,7 @@
 	};

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x20000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index c6fa34c..a1487ae 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -15,6 +15,7 @@
 	};

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index ce71f57..a36bfdb 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -15,6 +15,7 @@
 	};

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 81399b2..7c3cb7e 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -5,6 +5,7 @@

 / {
 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

--
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Matthias Brugger <mbrugger@suse.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH 05/18] ARM: dts: bcm283x: Define memory at board level
Date: Mon, 22 Jul 2019 07:54:36 +0200	[thread overview]
Message-ID: <1563774880-8061-6-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1563774880-8061-1-git-send-email-wahrenst@gmx.net>

Now with the varity of several RPi boards, the memory should be defined
at board level. This step gives us the chance to fix the memory size
of the RPi 1 B+, Zero (incl. W) and Compute Module 1.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-a.dts        | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-b.dts        | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi     | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-zero.dts     | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi.dtsi         | 5 -----
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts      | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 1 +
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi     | 1 +
 14 files changed, 45 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index cb3f08d..5b42e9a 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -8,6 +8,11 @@
 	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
 	model = "Raspberry Pi Model A+";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 2d167d9..b716214 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -8,6 +8,11 @@
 	compatible = "raspberrypi,model-a", "brcm,bcm2835";
 	model = "Raspberry Pi Model A";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 83a3a60..3318082 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
 	model = "Raspberry Pi Model B+";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index b6b4fea..97d7eb5 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
 	model = "Raspberry Pi Model B rev2";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index b5782fa..37e02a1 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
 	model = "Raspberry Pi Model B";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index ef22c2d..58059c2 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -10,6 +10,11 @@
 		};
 	};

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 5ecc403..f38f388 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -12,6 +12,11 @@
 	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
 	model = "Raspberry Pi Zero W";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	chosen {
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 84c7035..5fd0686 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -12,6 +12,11 @@
 	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
 	model = "Raspberry Pi Zero";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 40bac52e..f5125b7 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,11 +1,6 @@
 #include <dt-bindings/power/raspberrypi-power.h>

 / {
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-
 	leds {
 		compatible = "gpio-leds";

diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index f97ec95..6a89999 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -10,6 +10,7 @@
 	model = "Raspberry Pi 2 Model B";

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 7f4437a..0e29aaa 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -14,6 +14,7 @@
 	};

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x20000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index c6fa34c..a1487ae 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -15,6 +15,7 @@
 	};

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index ce71f57..a36bfdb 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -15,6 +15,7 @@
 	};

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 81399b2..7c3cb7e 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -5,6 +5,7 @@

 / {
 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

--
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Matthias Brugger <mbrugger@suse.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH 05/18] ARM: dts: bcm283x: Define memory at board level
Date: Mon, 22 Jul 2019 07:54:36 +0200	[thread overview]
Message-ID: <1563774880-8061-6-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1563774880-8061-1-git-send-email-wahrenst@gmx.net>

Now with the varity of several RPi boards, the memory should be defined
at board level. This step gives us the chance to fix the memory size
of the RPi 1 B+, Zero (incl. W) and Compute Module 1.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-a.dts        | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-b.dts        | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi     | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts   | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi-zero.dts     | 5 +++++
 arch/arm/boot/dts/bcm2835-rpi.dtsi         | 5 -----
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts      | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 1 +
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi     | 1 +
 14 files changed, 45 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index cb3f08d..5b42e9a 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -8,6 +8,11 @@
 	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
 	model = "Raspberry Pi Model A+";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 2d167d9..b716214 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -8,6 +8,11 @@
 	compatible = "raspberrypi,model-a", "brcm,bcm2835";
 	model = "Raspberry Pi Model A";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 83a3a60..3318082 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
 	model = "Raspberry Pi Model B+";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index b6b4fea..97d7eb5 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
 	model = "Raspberry Pi Model B rev2";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index b5782fa..37e02a1 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -9,6 +9,11 @@
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
 	model = "Raspberry Pi Model B";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index ef22c2d..58059c2 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -10,6 +10,11 @@
 		};
 	};

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 5ecc403..f38f388 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -12,6 +12,11 @@
 	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
 	model = "Raspberry Pi Zero W";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	chosen {
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 84c7035..5fd0686 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -12,6 +12,11 @@
 	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
 	model = "Raspberry Pi Zero";

+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 40bac52e..f5125b7 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,11 +1,6 @@
 #include <dt-bindings/power/raspberrypi-power.h>

 / {
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-
 	leds {
 		compatible = "gpio-leds";

diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index f97ec95..6a89999 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -10,6 +10,7 @@
 	model = "Raspberry Pi 2 Model B";

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 7f4437a..0e29aaa 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -14,6 +14,7 @@
 	};

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x20000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index c6fa34c..a1487ae 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -15,6 +15,7 @@
 	};

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index ce71f57..a36bfdb 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -15,6 +15,7 @@
 	};

 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 81399b2..7c3cb7e 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -5,6 +5,7 @@

 / {
 	memory@0 {
+		device_type = "memory";
 		reg = <0 0x40000000>;
 	};

--
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-07-22  5:56 UTC|newest]

Thread overview: 103+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-22  5:54 [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-07-22  5:54 ` Stefan Wahren
2019-07-22  5:54 ` Stefan Wahren
2019-07-22  5:54 ` [PATCH 01/18] ARM: bcm283x: Reduce register ranges for UART, SPI and I2C Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-24 20:01   ` Stefan Wahren
2019-07-24 20:01     ` Stefan Wahren
2019-07-24 20:01     ` Stefan Wahren
2019-07-22  5:54 ` [PATCH 02/18] ARM: bcm2835: DMA can only address 1GB Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22  5:54 ` [PATCH 03/18] ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22 17:54   ` Eric Anholt
2019-07-22 17:54     ` Eric Anholt
2019-07-22 17:54     ` Eric Anholt
2019-07-22  5:54 ` [PATCH 04/18] ARM: dts: bcm283x: Define MMC interfaces at board level Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-08-12 21:03   ` Stefan Wahren
2019-08-12 21:03     ` Stefan Wahren
2019-08-12 21:03     ` Stefan Wahren
2019-07-22  5:54 ` Stefan Wahren [this message]
2019-07-22  5:54   ` [PATCH 05/18] ARM: dts: bcm283x: Define memory " Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-08-12 21:02   ` Stefan Wahren
2019-08-12 21:02     ` Stefan Wahren
2019-08-12 21:02     ` Stefan Wahren
2019-07-22  5:54 ` [PATCH 06/18] dt-bindings: bcm2835-cprman: Add bcm2711 support Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22  5:54 ` [PATCH 07/18] clk: bcm2835: Introduce SoC specific clock registration Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22 10:30   ` Matthias Brugger
2019-07-22 10:30     ` Matthias Brugger
2019-07-22 10:30     ` Matthias Brugger
2019-08-11 20:43   ` Stefan Wahren
2019-08-11 20:43     ` Stefan Wahren
2019-08-11 20:43     ` Stefan Wahren
2019-07-22  5:54 ` [PATCH 08/18] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22 10:30   ` Matthias Brugger
2019-07-22 10:30     ` Matthias Brugger
2019-07-22 10:30     ` Matthias Brugger
2019-07-22  5:54 ` [PATCH 09/18] dt-bindings: sdhci-iproc: Add brcm,bcm2711-emmc2 Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22  5:54   ` Stefan Wahren
2019-07-22 10:31   ` Matthias Brugger
2019-07-22 10:31     ` Matthias Brugger
2019-07-22 10:31     ` Matthias Brugger
2019-07-24 14:08   ` Ulf Hansson
2019-07-24 14:08     ` Ulf Hansson
2019-07-24 14:08     ` Ulf Hansson
2019-07-22 11:26 ` [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Matthias Brugger
2019-07-22 11:26   ` Matthias Brugger
2019-07-22 11:26   ` Matthias Brugger
2019-07-22 13:18 ` Nicolas Saenz Julienne
2019-07-22 13:18   ` Nicolas Saenz Julienne
2019-07-22 13:18   ` Nicolas Saenz Julienne
2019-07-22 18:10   ` Stefan Wahren
2019-07-22 18:10     ` Stefan Wahren
2019-07-22 18:10     ` Stefan Wahren
2019-07-23  9:34     ` Christoph Hellwig
2019-07-23  9:34       ` Christoph Hellwig
2019-07-23  9:34       ` Christoph Hellwig
2019-07-23 13:32       ` Nicolas Saenz Julienne
2019-07-23 13:32         ` Nicolas Saenz Julienne
2019-07-23 14:33         ` Christoph Hellwig
2019-07-23 14:33           ` Christoph Hellwig
2019-07-23 14:33           ` Christoph Hellwig
2019-07-23 16:26         ` Stefan Wahren
2019-07-23 16:26           ` Stefan Wahren
2019-07-23 16:26           ` Stefan Wahren
2019-07-23 17:33           ` Nicolas Saenz Julienne
2019-07-23 17:33             ` Nicolas Saenz Julienne
2019-07-23 21:30             ` Stefan Wahren
2019-07-23 21:30               ` Stefan Wahren
2019-07-23 21:30               ` Stefan Wahren
2019-07-24  2:53             ` Chen-Yu Tsai
2019-07-24  2:53               ` Chen-Yu Tsai
2019-07-24  2:53               ` Chen-Yu Tsai
2019-07-24  8:37               ` Nicolas Saenz Julienne
2019-07-24  8:37                 ` Nicolas Saenz Julienne
2019-07-27 15:17                 ` brcmfmac: Probing regression in Linux 5.3-rc1 Stefan Wahren
2019-07-29  5:44                   ` Stefan Wahren
2019-07-29  5:44                     ` Stefan Wahren
2019-07-25  8:22             ` [PATCH 00/18] ARM: Add minimal Raspberry Pi 4 support Nicolas Saenz Julienne
2019-07-25  8:22               ` Nicolas Saenz Julienne
2019-07-25 22:09               ` Stefan Wahren
2019-07-25 22:09                 ` Stefan Wahren
2019-07-25 22:09                 ` Stefan Wahren
2019-07-22 18:01 ` Eric Anholt
2019-07-22 18:01   ` Eric Anholt
2019-07-22 18:01   ` Eric Anholt
2019-07-28 11:22 ` Stefan Wahren
2019-07-28 11:22   ` Stefan Wahren
2019-07-28 11:22   ` Stefan Wahren
2019-08-05  9:33   ` Linus Walleij
2019-08-05  9:33     ` Linus Walleij
2019-08-05  9:33     ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1563774880-8061-6-git-send-email-wahrenst@gmx.net \
    --to=wahrenst@gmx.net \
    --cc=adrian.hunter@intel.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=eric@anholt.net \
    --cc=f.fainelli@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=mbrugger@suse.com \
    --cc=mturquette@baylibre.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sbranden@broadcom.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.