From: Horatiu Vultur <horatiu.vultur@microchip.com> To: <roopa@cumulusnetworks.com>, <nikolay@cumulusnetworks.com>, <davem@davemloft.net>, <UNGLinuxDriver@microchip.com>, <alexandre.belloni@bootlin.com>, <allan.nielsen@microchip.com>, <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <bridge@lists.linux-foundation.org> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Subject: [PATCH 2/3] net: mscc: Use NETIF_F_HW_BRIDGE Date: Thu, 22 Aug 2019 21:07:29 +0200 [thread overview] Message-ID: <1566500850-6247-3-git-send-email-horatiu.vultur@microchip.com> (raw) In-Reply-To: <1566500850-6247-1-git-send-email-horatiu.vultur@microchip.com> Enable HW_BRIDGE feature for ocelot. In this way the HW will do all the switching of the frames so it is not needed for the ports to be in promisc mode. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> --- drivers/net/ethernet/mscc/ocelot.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 4d1bce4..c9cf2bee 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -2017,8 +2017,10 @@ int ocelot_probe_port(struct ocelot *ocelot, u8 port, dev->ethtool_ops = &ocelot_ethtool_ops; dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_RXFCS | - NETIF_F_HW_TC; - dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_TC; + NETIF_F_HW_TC | NETIF_F_HW_BRIDGE; + dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_TC | + NETIF_F_HW_BRIDGE; + dev->priv_flags |= IFF_UNICAST_FLT; memcpy(dev->dev_addr, ocelot->base_mac, ETH_ALEN); dev->dev_addr[ETH_ALEN - 1] += port; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Horatiu Vultur <horatiu.vultur@microchip.com> To: roopa@cumulusnetworks.com, nikolay@cumulusnetworks.com, davem@davemloft.net, UNGLinuxDriver@microchip.com, alexandre.belloni@bootlin.com, allan.nielsen@microchip.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, bridge@lists.linux-foundation.org Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Subject: [Bridge] [PATCH 2/3] net: mscc: Use NETIF_F_HW_BRIDGE Date: Thu, 22 Aug 2019 21:07:29 +0200 [thread overview] Message-ID: <1566500850-6247-3-git-send-email-horatiu.vultur@microchip.com> (raw) In-Reply-To: <1566500850-6247-1-git-send-email-horatiu.vultur@microchip.com> Enable HW_BRIDGE feature for ocelot. In this way the HW will do all the switching of the frames so it is not needed for the ports to be in promisc mode. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> --- drivers/net/ethernet/mscc/ocelot.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 4d1bce4..c9cf2bee 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -2017,8 +2017,10 @@ int ocelot_probe_port(struct ocelot *ocelot, u8 port, dev->ethtool_ops = &ocelot_ethtool_ops; dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_RXFCS | - NETIF_F_HW_TC; - dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_TC; + NETIF_F_HW_TC | NETIF_F_HW_BRIDGE; + dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_TC | + NETIF_F_HW_BRIDGE; + dev->priv_flags |= IFF_UNICAST_FLT; memcpy(dev->dev_addr, ocelot->base_mac, ETH_ALEN); dev->dev_addr[ETH_ALEN - 1] += port; -- 2.7.4
next prev parent reply other threads:[~2019-08-22 19:08 UTC|newest] Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-22 19:07 [PATCH 0/3] Add NETIF_F_HW_BRIDGE feature Horatiu Vultur 2019-08-22 19:07 ` [Bridge] " Horatiu Vultur 2019-08-22 19:07 ` [PATCH 1/3] net: Add HW_BRIDGE offload feature Horatiu Vultur 2019-08-22 19:07 ` [Bridge] " Horatiu Vultur 2019-08-22 20:08 ` Andrew Lunn 2019-08-22 20:08 ` [Bridge] " Andrew Lunn 2019-08-23 12:39 ` Horatiu Vultur 2019-08-23 12:39 ` [Bridge] " Horatiu Vultur 2019-08-23 23:30 ` Florian Fainelli 2019-08-23 23:30 ` [Bridge] " Florian Fainelli 2019-08-25 10:44 ` Horatiu Vultur 2019-08-25 10:44 ` [Bridge] " Horatiu Vultur 2019-08-22 19:07 ` Horatiu Vultur [this message] 2019-08-22 19:07 ` [Bridge] [PATCH 2/3] net: mscc: Use NETIF_F_HW_BRIDGE Horatiu Vultur 2019-08-22 19:07 ` [PATCH 3/3] net: mscc: Implement promisc mode Horatiu Vultur 2019-08-22 19:07 ` [Bridge] " Horatiu Vultur 2019-08-22 22:09 ` [PATCH 0/3] Add NETIF_F_HW_BRIDGE feature Nikolay Aleksandrov 2019-08-22 22:09 ` [Bridge] " Nikolay Aleksandrov 2019-08-22 22:26 ` Nikolay Aleksandrov 2019-08-22 22:26 ` [Bridge] " Nikolay Aleksandrov 2019-08-23 12:26 ` Horatiu Vultur 2019-08-23 12:26 ` [Bridge] " Horatiu Vultur 2019-08-23 13:25 ` Andrew Lunn 2019-08-23 13:25 ` [Bridge] " Andrew Lunn 2019-08-23 15:57 ` Horatiu Vultur 2019-08-23 15:57 ` [Bridge] " Horatiu Vultur 2019-08-22 22:32 ` David Miller 2019-08-22 22:32 ` [Bridge] " David Miller 2019-08-23 23:25 ` Florian Fainelli 2019-08-23 23:25 ` [Bridge] " Florian Fainelli 2019-08-24 7:42 ` Jiri Pirko 2019-08-25 16:30 ` Horatiu Vultur 2019-08-25 16:30 ` [Bridge] " Horatiu Vultur 2019-08-24 12:05 ` Stephen Hemminger 2019-08-24 12:05 ` Stephen Hemminger
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1566500850-6247-3-git-send-email-horatiu.vultur@microchip.com \ --to=horatiu.vultur@microchip.com \ --cc=UNGLinuxDriver@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=allan.nielsen@microchip.com \ --cc=bridge@lists.linux-foundation.org \ --cc=davem@davemloft.net \ --cc=linux-kernel@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=nikolay@cumulusnetworks.com \ --cc=roopa@cumulusnetworks.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.