All of lore.kernel.org
 help / color / mirror / Atom feed
From: Talel Shenhar <talel@amazon.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<mchehab+samsung@kernel.org>, <davem@davemloft.net>,
	<gregkh@linuxfoundation.org>, <nicolas.ferre@microchip.com>,
	<tglx@linutronix.de>, <arnd@arndb.de>, <venture@google.com>,
	<linus.walleij@linaro.org>, <olof@lixom.net>,
	<mripard@kernel.org>, <ssantosh@kernel.org>,
	<paul.kocialkowski@bootlin.com>, <mjourdan@baylibre.com>,
	<catalin.marinas@arm.com>, <will@kernel.org>, <talel@amazon.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Cc: <dwmw@amazon.co.uk>, <benh@kernel.crashing.org>,
	<hhhawa@amazon.com>, <ronenk@amazon.com>, <jonnyc@amazon.com>,
	<hanochu@amazon.com>, <barakw@amazon.com>
Subject: [PATCH 2/3] soc: amazon: al-pos: Introduce Amazon's Annapurna Labs POS driver
Date: Mon, 9 Sep 2019 12:10:19 +0300	[thread overview]
Message-ID: <1568020220-7758-3-git-send-email-talel@amazon.com> (raw)
In-Reply-To: <1568020220-7758-1-git-send-email-talel@amazon.com>

The Amazon's Annapurna Labs SoCs includes Point Of Serialization error
logging unit that reports an error in case write error (e.g. attempt to
write to a read only register).
This patch introduces the support for this unit.

Signed-off-by: Talel Shenhar <talel@amazon.com>
---
 MAINTAINERS                 |   6 +++
 drivers/soc/Kconfig         |   1 +
 drivers/soc/Makefile        |   1 +
 drivers/soc/amazon/Kconfig  |   5 ++
 drivers/soc/amazon/Makefile |   1 +
 drivers/soc/amazon/al_pos.c | 129 ++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 143 insertions(+)
 create mode 100644 drivers/soc/amazon/Kconfig
 create mode 100644 drivers/soc/amazon/Makefile
 create mode 100644 drivers/soc/amazon/al_pos.c

diff --git a/MAINTAINERS b/MAINTAINERS
index e7a47b5..627af40 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -751,6 +751,12 @@ F:	drivers/tty/serial/altera_jtaguart.c
 F:	include/linux/altera_uart.h
 F:	include/linux/altera_jtaguart.h
 
+AMAZON ANNAPURNA LABS POS
+M:	Talel Shenhar <talel@amazon.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/soc/amazon/amazon,al-pos.txt
+F:	drivers/soc/amazon/al_pos.c
+
 AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
 M:	Talel Shenhar <talel@amazon.com>
 S:	Maintained
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 833e04a..913a6b1 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -2,6 +2,7 @@
 menu "SOC (System On Chip) specific Drivers"
 
 source "drivers/soc/actions/Kconfig"
+source "drivers/soc/amazon/Kconfig"
 source "drivers/soc/amlogic/Kconfig"
 source "drivers/soc/aspeed/Kconfig"
 source "drivers/soc/atmel/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 2ec3550..c1c5c64 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_ARCH_ACTIONS)	+= actions/
 obj-$(CONFIG_SOC_ASPEED)	+= aspeed/
 obj-$(CONFIG_ARCH_AT91)		+= atmel/
+obj-y				+= amazon/
 obj-y				+= bcm/
 obj-$(CONFIG_ARCH_DOVE)		+= dove/
 obj-$(CONFIG_MACH_DOVE)		+= dove/
diff --git a/drivers/soc/amazon/Kconfig b/drivers/soc/amazon/Kconfig
new file mode 100644
index 00000000..fdd4cdd
--- /dev/null
+++ b/drivers/soc/amazon/Kconfig
@@ -0,0 +1,5 @@
+config AL_POS
+	bool "Amazon's Annapurna Labs POS driver"
+	depends on ARCH_ALPINE || COMPILE_TEST
+	help
+	  Include support for the SoC POS error capability.
diff --git a/drivers/soc/amazon/Makefile b/drivers/soc/amazon/Makefile
new file mode 100644
index 00000000..a31441a
--- /dev/null
+++ b/drivers/soc/amazon/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_AL_POS) += al_pos.o
diff --git a/drivers/soc/amazon/al_pos.c b/drivers/soc/amazon/al_pos.c
new file mode 100644
index 00000000..6d0bdff
--- /dev/null
+++ b/drivers/soc/amazon/al_pos.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+#include <linux/bitfield.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Talel Shenhar");
+MODULE_DESCRIPTION("Amazon's Annapurna Labs POS driver");
+
+/* Registers Offset */
+#define AL_POS_ERROR_LOG_1	0x0
+#define AL_POS_ERROR_LOG_0	0x4
+
+/* Registers Fields */
+#define AL_POS_ERROR_LOG_1_VALID	GENMASK(31, 31)
+#define AL_POS_ERROR_LOG_1_BRESP	GENMASK(18, 17)
+#define AL_POS_ERROR_LOG_1_REQUEST_ID	GENMASK(16, 8)
+#define AL_POS_ERROR_LOG_1_ADDR_HIGH	GENMASK(7, 0)
+
+#define AL_POS_ERROR_LOG_0_ADDR_LOW	GENMASK(31, 0)
+
+static int al_pos_panic;
+module_param(al_pos_panic, int, 0);
+MODULE_PARM_DESC(al_pos_panic, "Defines if POS error is causing panic()");
+
+struct al_pos {
+	struct platform_device *pdev;
+	void __iomem *mmio_base;
+	int irq;
+};
+
+static irqreturn_t al_pos_irq_handler(int irq, void *info)
+{
+	struct platform_device *pdev = info;
+	struct al_pos *pos = platform_get_drvdata(pdev);
+	u32 log1;
+	u32 log0;
+	u64 addr;
+	u16 request_id;
+	u8 bresp;
+
+	log1 = readl_relaxed(pos->mmio_base + AL_POS_ERROR_LOG_1);
+	if (!FIELD_GET(AL_POS_ERROR_LOG_1_VALID, log1))
+		return IRQ_NONE;
+
+	log0 = readl_relaxed(pos->mmio_base + AL_POS_ERROR_LOG_0);
+	writel_relaxed(0, pos->mmio_base + AL_POS_ERROR_LOG_1);
+
+	addr = FIELD_GET(AL_POS_ERROR_LOG_0_ADDR_LOW, log0);
+	addr |= (FIELD_GET(AL_POS_ERROR_LOG_1_ADDR_HIGH, log1) << 32);
+	request_id = FIELD_GET(AL_POS_ERROR_LOG_1_REQUEST_ID, log1);
+	bresp = FIELD_GET(AL_POS_ERROR_LOG_1_BRESP, log1);
+
+	dev_err(&pdev->dev, "addr=0x%llx request_id=0x%x bresp=0x%x\n",
+		addr, request_id, bresp);
+
+	if (al_pos_panic)
+		panic("POS");
+
+	return IRQ_HANDLED;
+}
+
+static int al_pos_probe(struct platform_device *pdev)
+{
+	struct al_pos *pos;
+	struct resource *resource;
+	int ret;
+
+	pos = devm_kzalloc(&pdev->dev, sizeof(*pos), GFP_KERNEL);
+	if (!pos)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pos);
+	pos->pdev = pdev;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pos->mmio_base = devm_ioremap_resource(&pdev->dev, resource);
+	if (IS_ERR(pos->mmio_base)) {
+		dev_err(&pdev->dev, "failed to ioremap memory (%ld)\n",
+			PTR_ERR(pos->mmio_base));
+		return PTR_ERR(pos->mmio_base);
+	}
+
+	pos->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (pos->irq <= 0) {
+		dev_err(&pdev->dev, "fail to parse and map irq\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(&pdev->dev,
+			       pos->irq,
+			       al_pos_irq_handler,
+			       0,
+			       pdev->name,
+			       pdev);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"failed to register to irq %d (%d)\n",
+			pos->irq, ret);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "successfully loaded\n");
+
+	return 0;
+}
+
+static const struct of_device_id al_pos_of_match[] = {
+	{ .compatible = "amazon,al-pos", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, al_pos_of_match);
+
+static struct platform_driver al_pos_driver = {
+	.probe = al_pos_probe,
+	.driver = {
+		.name = "al-pos",
+		.of_match_table = al_pos_of_match,
+	},
+};
+
+module_platform_driver(al_pos_driver);
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Talel Shenhar <talel@amazon.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
	mchehab+samsung@kernel.org, davem@davemloft.net,
	gregkh@linuxfoundation.org, nicolas.ferre@microchip.com,
	tglx@linutronix.de, arnd@arndb.de, venture@google.com,
	linus.walleij@linaro.org, olof@lixom.net, mripard@kernel.org,
	ssantosh@kernel.org, paul.kocialkowski@bootlin.com,
	mjourdan@baylibre.com, catalin.marinas@arm.com, will@kernel.org,
	talel@amazon.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: dwmw@amazon.co.uk, benh@kernel.crashing.org, hhhawa@amazon.com,
	ronenk@amazon.com, jonnyc@amazon.com, hanochu@amazon.com,
	barakw@amazon.com
Subject: [PATCH 2/3] soc: amazon: al-pos: Introduce Amazon's Annapurna Labs POS driver
Date: Mon, 9 Sep 2019 12:10:19 +0300	[thread overview]
Message-ID: <1568020220-7758-3-git-send-email-talel@amazon.com> (raw)
In-Reply-To: <1568020220-7758-1-git-send-email-talel@amazon.com>

The Amazon's Annapurna Labs SoCs includes Point Of Serialization error
logging unit that reports an error in case write error (e.g. attempt to
write to a read only register).
This patch introduces the support for this unit.

Signed-off-by: Talel Shenhar <talel@amazon.com>
---
 MAINTAINERS                 |   6 +++
 drivers/soc/Kconfig         |   1 +
 drivers/soc/Makefile        |   1 +
 drivers/soc/amazon/Kconfig  |   5 ++
 drivers/soc/amazon/Makefile |   1 +
 drivers/soc/amazon/al_pos.c | 129 ++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 143 insertions(+)
 create mode 100644 drivers/soc/amazon/Kconfig
 create mode 100644 drivers/soc/amazon/Makefile
 create mode 100644 drivers/soc/amazon/al_pos.c

diff --git a/MAINTAINERS b/MAINTAINERS
index e7a47b5..627af40 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -751,6 +751,12 @@ F:	drivers/tty/serial/altera_jtaguart.c
 F:	include/linux/altera_uart.h
 F:	include/linux/altera_jtaguart.h
 
+AMAZON ANNAPURNA LABS POS
+M:	Talel Shenhar <talel@amazon.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/soc/amazon/amazon,al-pos.txt
+F:	drivers/soc/amazon/al_pos.c
+
 AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
 M:	Talel Shenhar <talel@amazon.com>
 S:	Maintained
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 833e04a..913a6b1 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -2,6 +2,7 @@
 menu "SOC (System On Chip) specific Drivers"
 
 source "drivers/soc/actions/Kconfig"
+source "drivers/soc/amazon/Kconfig"
 source "drivers/soc/amlogic/Kconfig"
 source "drivers/soc/aspeed/Kconfig"
 source "drivers/soc/atmel/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 2ec3550..c1c5c64 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_ARCH_ACTIONS)	+= actions/
 obj-$(CONFIG_SOC_ASPEED)	+= aspeed/
 obj-$(CONFIG_ARCH_AT91)		+= atmel/
+obj-y				+= amazon/
 obj-y				+= bcm/
 obj-$(CONFIG_ARCH_DOVE)		+= dove/
 obj-$(CONFIG_MACH_DOVE)		+= dove/
diff --git a/drivers/soc/amazon/Kconfig b/drivers/soc/amazon/Kconfig
new file mode 100644
index 00000000..fdd4cdd
--- /dev/null
+++ b/drivers/soc/amazon/Kconfig
@@ -0,0 +1,5 @@
+config AL_POS
+	bool "Amazon's Annapurna Labs POS driver"
+	depends on ARCH_ALPINE || COMPILE_TEST
+	help
+	  Include support for the SoC POS error capability.
diff --git a/drivers/soc/amazon/Makefile b/drivers/soc/amazon/Makefile
new file mode 100644
index 00000000..a31441a
--- /dev/null
+++ b/drivers/soc/amazon/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_AL_POS) += al_pos.o
diff --git a/drivers/soc/amazon/al_pos.c b/drivers/soc/amazon/al_pos.c
new file mode 100644
index 00000000..6d0bdff
--- /dev/null
+++ b/drivers/soc/amazon/al_pos.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+#include <linux/bitfield.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Talel Shenhar");
+MODULE_DESCRIPTION("Amazon's Annapurna Labs POS driver");
+
+/* Registers Offset */
+#define AL_POS_ERROR_LOG_1	0x0
+#define AL_POS_ERROR_LOG_0	0x4
+
+/* Registers Fields */
+#define AL_POS_ERROR_LOG_1_VALID	GENMASK(31, 31)
+#define AL_POS_ERROR_LOG_1_BRESP	GENMASK(18, 17)
+#define AL_POS_ERROR_LOG_1_REQUEST_ID	GENMASK(16, 8)
+#define AL_POS_ERROR_LOG_1_ADDR_HIGH	GENMASK(7, 0)
+
+#define AL_POS_ERROR_LOG_0_ADDR_LOW	GENMASK(31, 0)
+
+static int al_pos_panic;
+module_param(al_pos_panic, int, 0);
+MODULE_PARM_DESC(al_pos_panic, "Defines if POS error is causing panic()");
+
+struct al_pos {
+	struct platform_device *pdev;
+	void __iomem *mmio_base;
+	int irq;
+};
+
+static irqreturn_t al_pos_irq_handler(int irq, void *info)
+{
+	struct platform_device *pdev = info;
+	struct al_pos *pos = platform_get_drvdata(pdev);
+	u32 log1;
+	u32 log0;
+	u64 addr;
+	u16 request_id;
+	u8 bresp;
+
+	log1 = readl_relaxed(pos->mmio_base + AL_POS_ERROR_LOG_1);
+	if (!FIELD_GET(AL_POS_ERROR_LOG_1_VALID, log1))
+		return IRQ_NONE;
+
+	log0 = readl_relaxed(pos->mmio_base + AL_POS_ERROR_LOG_0);
+	writel_relaxed(0, pos->mmio_base + AL_POS_ERROR_LOG_1);
+
+	addr = FIELD_GET(AL_POS_ERROR_LOG_0_ADDR_LOW, log0);
+	addr |= (FIELD_GET(AL_POS_ERROR_LOG_1_ADDR_HIGH, log1) << 32);
+	request_id = FIELD_GET(AL_POS_ERROR_LOG_1_REQUEST_ID, log1);
+	bresp = FIELD_GET(AL_POS_ERROR_LOG_1_BRESP, log1);
+
+	dev_err(&pdev->dev, "addr=0x%llx request_id=0x%x bresp=0x%x\n",
+		addr, request_id, bresp);
+
+	if (al_pos_panic)
+		panic("POS");
+
+	return IRQ_HANDLED;
+}
+
+static int al_pos_probe(struct platform_device *pdev)
+{
+	struct al_pos *pos;
+	struct resource *resource;
+	int ret;
+
+	pos = devm_kzalloc(&pdev->dev, sizeof(*pos), GFP_KERNEL);
+	if (!pos)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pos);
+	pos->pdev = pdev;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pos->mmio_base = devm_ioremap_resource(&pdev->dev, resource);
+	if (IS_ERR(pos->mmio_base)) {
+		dev_err(&pdev->dev, "failed to ioremap memory (%ld)\n",
+			PTR_ERR(pos->mmio_base));
+		return PTR_ERR(pos->mmio_base);
+	}
+
+	pos->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (pos->irq <= 0) {
+		dev_err(&pdev->dev, "fail to parse and map irq\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(&pdev->dev,
+			       pos->irq,
+			       al_pos_irq_handler,
+			       0,
+			       pdev->name,
+			       pdev);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"failed to register to irq %d (%d)\n",
+			pos->irq, ret);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "successfully loaded\n");
+
+	return 0;
+}
+
+static const struct of_device_id al_pos_of_match[] = {
+	{ .compatible = "amazon,al-pos", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, al_pos_of_match);
+
+static struct platform_driver al_pos_driver = {
+	.probe = al_pos_probe,
+	.driver = {
+		.name = "al-pos",
+		.of_match_table = al_pos_of_match,
+	},
+};
+
+module_platform_driver(al_pos_driver);
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Talel Shenhar <talel@amazon.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<mchehab+samsung@kernel.org>, <davem@davemloft.net>,
	<gregkh@linuxfoundation.org>, <nicolas.ferre@microchip.com>,
	<tglx@linutronix.de>, <arnd@arndb.de>, <venture@google.com>,
	<linus.walleij@linaro.org>, <olof@lixom.net>,
	<mripard@kernel.org>, <ssantosh@kernel.org>,
	<paul.kocialkowski@bootlin.com>, <mjourdan@baylibre.com>,
	<catalin.marinas@arm.com>, <will@kernel.org>, <talel@amazon.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Cc: barakw@amazon.com, hhhawa@amazon.com, benh@kernel.crashing.org,
	jonnyc@amazon.com, ronenk@amazon.com, hanochu@amazon.com,
	dwmw@amazon.co.uk
Subject: [PATCH 2/3] soc: amazon: al-pos: Introduce Amazon's Annapurna Labs POS driver
Date: Mon, 9 Sep 2019 12:10:19 +0300	[thread overview]
Message-ID: <1568020220-7758-3-git-send-email-talel@amazon.com> (raw)
In-Reply-To: <1568020220-7758-1-git-send-email-talel@amazon.com>

The Amazon's Annapurna Labs SoCs includes Point Of Serialization error
logging unit that reports an error in case write error (e.g. attempt to
write to a read only register).
This patch introduces the support for this unit.

Signed-off-by: Talel Shenhar <talel@amazon.com>
---
 MAINTAINERS                 |   6 +++
 drivers/soc/Kconfig         |   1 +
 drivers/soc/Makefile        |   1 +
 drivers/soc/amazon/Kconfig  |   5 ++
 drivers/soc/amazon/Makefile |   1 +
 drivers/soc/amazon/al_pos.c | 129 ++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 143 insertions(+)
 create mode 100644 drivers/soc/amazon/Kconfig
 create mode 100644 drivers/soc/amazon/Makefile
 create mode 100644 drivers/soc/amazon/al_pos.c

diff --git a/MAINTAINERS b/MAINTAINERS
index e7a47b5..627af40 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -751,6 +751,12 @@ F:	drivers/tty/serial/altera_jtaguart.c
 F:	include/linux/altera_uart.h
 F:	include/linux/altera_jtaguart.h
 
+AMAZON ANNAPURNA LABS POS
+M:	Talel Shenhar <talel@amazon.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/soc/amazon/amazon,al-pos.txt
+F:	drivers/soc/amazon/al_pos.c
+
 AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
 M:	Talel Shenhar <talel@amazon.com>
 S:	Maintained
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 833e04a..913a6b1 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -2,6 +2,7 @@
 menu "SOC (System On Chip) specific Drivers"
 
 source "drivers/soc/actions/Kconfig"
+source "drivers/soc/amazon/Kconfig"
 source "drivers/soc/amlogic/Kconfig"
 source "drivers/soc/aspeed/Kconfig"
 source "drivers/soc/atmel/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 2ec3550..c1c5c64 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_ARCH_ACTIONS)	+= actions/
 obj-$(CONFIG_SOC_ASPEED)	+= aspeed/
 obj-$(CONFIG_ARCH_AT91)		+= atmel/
+obj-y				+= amazon/
 obj-y				+= bcm/
 obj-$(CONFIG_ARCH_DOVE)		+= dove/
 obj-$(CONFIG_MACH_DOVE)		+= dove/
diff --git a/drivers/soc/amazon/Kconfig b/drivers/soc/amazon/Kconfig
new file mode 100644
index 00000000..fdd4cdd
--- /dev/null
+++ b/drivers/soc/amazon/Kconfig
@@ -0,0 +1,5 @@
+config AL_POS
+	bool "Amazon's Annapurna Labs POS driver"
+	depends on ARCH_ALPINE || COMPILE_TEST
+	help
+	  Include support for the SoC POS error capability.
diff --git a/drivers/soc/amazon/Makefile b/drivers/soc/amazon/Makefile
new file mode 100644
index 00000000..a31441a
--- /dev/null
+++ b/drivers/soc/amazon/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_AL_POS) += al_pos.o
diff --git a/drivers/soc/amazon/al_pos.c b/drivers/soc/amazon/al_pos.c
new file mode 100644
index 00000000..6d0bdff
--- /dev/null
+++ b/drivers/soc/amazon/al_pos.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+#include <linux/bitfield.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Talel Shenhar");
+MODULE_DESCRIPTION("Amazon's Annapurna Labs POS driver");
+
+/* Registers Offset */
+#define AL_POS_ERROR_LOG_1	0x0
+#define AL_POS_ERROR_LOG_0	0x4
+
+/* Registers Fields */
+#define AL_POS_ERROR_LOG_1_VALID	GENMASK(31, 31)
+#define AL_POS_ERROR_LOG_1_BRESP	GENMASK(18, 17)
+#define AL_POS_ERROR_LOG_1_REQUEST_ID	GENMASK(16, 8)
+#define AL_POS_ERROR_LOG_1_ADDR_HIGH	GENMASK(7, 0)
+
+#define AL_POS_ERROR_LOG_0_ADDR_LOW	GENMASK(31, 0)
+
+static int al_pos_panic;
+module_param(al_pos_panic, int, 0);
+MODULE_PARM_DESC(al_pos_panic, "Defines if POS error is causing panic()");
+
+struct al_pos {
+	struct platform_device *pdev;
+	void __iomem *mmio_base;
+	int irq;
+};
+
+static irqreturn_t al_pos_irq_handler(int irq, void *info)
+{
+	struct platform_device *pdev = info;
+	struct al_pos *pos = platform_get_drvdata(pdev);
+	u32 log1;
+	u32 log0;
+	u64 addr;
+	u16 request_id;
+	u8 bresp;
+
+	log1 = readl_relaxed(pos->mmio_base + AL_POS_ERROR_LOG_1);
+	if (!FIELD_GET(AL_POS_ERROR_LOG_1_VALID, log1))
+		return IRQ_NONE;
+
+	log0 = readl_relaxed(pos->mmio_base + AL_POS_ERROR_LOG_0);
+	writel_relaxed(0, pos->mmio_base + AL_POS_ERROR_LOG_1);
+
+	addr = FIELD_GET(AL_POS_ERROR_LOG_0_ADDR_LOW, log0);
+	addr |= (FIELD_GET(AL_POS_ERROR_LOG_1_ADDR_HIGH, log1) << 32);
+	request_id = FIELD_GET(AL_POS_ERROR_LOG_1_REQUEST_ID, log1);
+	bresp = FIELD_GET(AL_POS_ERROR_LOG_1_BRESP, log1);
+
+	dev_err(&pdev->dev, "addr=0x%llx request_id=0x%x bresp=0x%x\n",
+		addr, request_id, bresp);
+
+	if (al_pos_panic)
+		panic("POS");
+
+	return IRQ_HANDLED;
+}
+
+static int al_pos_probe(struct platform_device *pdev)
+{
+	struct al_pos *pos;
+	struct resource *resource;
+	int ret;
+
+	pos = devm_kzalloc(&pdev->dev, sizeof(*pos), GFP_KERNEL);
+	if (!pos)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pos);
+	pos->pdev = pdev;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pos->mmio_base = devm_ioremap_resource(&pdev->dev, resource);
+	if (IS_ERR(pos->mmio_base)) {
+		dev_err(&pdev->dev, "failed to ioremap memory (%ld)\n",
+			PTR_ERR(pos->mmio_base));
+		return PTR_ERR(pos->mmio_base);
+	}
+
+	pos->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (pos->irq <= 0) {
+		dev_err(&pdev->dev, "fail to parse and map irq\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(&pdev->dev,
+			       pos->irq,
+			       al_pos_irq_handler,
+			       0,
+			       pdev->name,
+			       pdev);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"failed to register to irq %d (%d)\n",
+			pos->irq, ret);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "successfully loaded\n");
+
+	return 0;
+}
+
+static const struct of_device_id al_pos_of_match[] = {
+	{ .compatible = "amazon,al-pos", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, al_pos_of_match);
+
+static struct platform_driver al_pos_driver = {
+	.probe = al_pos_probe,
+	.driver = {
+		.name = "al-pos",
+		.of_match_table = al_pos_of_match,
+	},
+};
+
+module_platform_driver(al_pos_driver);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-09-09  9:14 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-09  9:10 [PATCH 0/3] Amazon's Annapurna Labs POS Driver Talel Shenhar
2019-09-09  9:10 ` Talel Shenhar
2019-09-09  9:10 ` Talel Shenhar
2019-09-09  9:10 ` [PATCH 1/3] dt-bindings: soc: al-pos: Amazon's Annapurna Labs POS Talel Shenhar
2019-09-09  9:10   ` Talel Shenhar
2019-09-09  9:10   ` Talel Shenhar
2019-09-09  9:10 ` Talel Shenhar [this message]
2019-09-09  9:10   ` [PATCH 2/3] soc: amazon: al-pos: Introduce Amazon's Annapurna Labs POS driver Talel Shenhar
2019-09-09  9:10   ` Talel Shenhar
2019-09-09  9:44   ` Arnd Bergmann
2019-09-09  9:44     ` Arnd Bergmann
2019-09-09  9:44     ` Arnd Bergmann
2019-09-09 11:12     ` Shenhar, Talel
2019-09-09 11:12       ` Shenhar, Talel
2019-09-09 11:12       ` Shenhar, Talel
2019-09-09 13:41       ` Arnd Bergmann
2019-09-09 13:41         ` Arnd Bergmann
2019-09-09 13:41         ` Arnd Bergmann
2019-09-09 14:11         ` Shenhar, Talel
2019-09-09 14:11           ` Shenhar, Talel
2019-09-09 14:11           ` Shenhar, Talel
2019-09-09 15:16           ` Arnd Bergmann
2019-09-09 15:16             ` Arnd Bergmann
2019-09-09 15:16             ` Arnd Bergmann
2019-09-10  6:21             ` Shenhar, Talel
2019-09-10  6:21               ` Shenhar, Talel
2019-09-10  6:21               ` Shenhar, Talel
2019-09-09 11:51   ` kbuild test robot
2019-09-09 11:51     ` kbuild test robot
2019-09-09 11:51     ` kbuild test robot
2019-09-09  9:10 ` [PATCH 3/3] arm64: alpine: select AL_POS Talel Shenhar
2019-09-09  9:10   ` Talel Shenhar
2019-09-09  9:10   ` Talel Shenhar
2019-09-09  9:40   ` Arnd Bergmann
2019-09-09  9:40     ` Arnd Bergmann
2019-09-09  9:40     ` Arnd Bergmann
2019-09-09 10:16     ` Shenhar, Talel
2019-09-09 10:16       ` Shenhar, Talel
2019-09-09 10:16       ` Shenhar, Talel
2019-09-09 13:45       ` Arnd Bergmann
2019-09-09 13:45         ` Arnd Bergmann
2019-09-09 13:45         ` Arnd Bergmann
2019-09-09 13:58         ` Shenhar, Talel
2019-09-09 13:58           ` Shenhar, Talel
2019-09-09 13:58           ` Shenhar, Talel
2019-09-09 15:08           ` Arnd Bergmann
2019-09-09 15:08             ` Arnd Bergmann
2019-09-09 15:08             ` Arnd Bergmann
2019-09-10  6:17             ` Shenhar, Talel
2019-09-10  6:17               ` Shenhar, Talel
2019-09-10  6:17               ` Shenhar, Talel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1568020220-7758-3-git-send-email-talel@amazon.com \
    --to=talel@amazon.com \
    --cc=arnd@arndb.de \
    --cc=barakw@amazon.com \
    --cc=benh@kernel.crashing.org \
    --cc=catalin.marinas@arm.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw@amazon.co.uk \
    --cc=gregkh@linuxfoundation.org \
    --cc=hanochu@amazon.com \
    --cc=hhhawa@amazon.com \
    --cc=jonnyc@amazon.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=mjourdan@baylibre.com \
    --cc=mripard@kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=olof@lixom.net \
    --cc=paul.kocialkowski@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=ronenk@amazon.com \
    --cc=ssantosh@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=venture@google.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.