* [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
@ 2019-10-02 15:57 ` Dan Haab
0 siblings, 0 replies; 3+ messages in thread
From: Dan Haab @ 2019-10-02 15:57 UTC (permalink / raw)
To: Florian Fainelli
Cc: Mark Rutland, devicetree, Hauke Mehrtens,
Rafał Miłecki, Rob Herring, bcm-kernel-feedback-list,
Dan Haab, linux-arm-kernel
From: Dan Haab <dan.haab@legrand.com>
It's a simple network device based on BCM47094 with just a single
Ethernet port.
Signed-off-by: Dan Haab <dan.haab@legrand.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 53 +++++++++++++++++++++++++++
2 files changed, 54 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b21b3a6..f6b578d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -113,6 +113,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xap-1610.dtb \
bcm47094-luxul-xbr-4500.dtb \
+ bcm47094-luxul-xwc-2000.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
new file mode 100644
index 0000000..3343253
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Legrand AV Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XWC-2000 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
@ 2019-10-02 15:57 ` Dan Haab
0 siblings, 0 replies; 3+ messages in thread
From: Dan Haab @ 2019-10-02 15:57 UTC (permalink / raw)
To: Florian Fainelli
Cc: Mark Rutland, devicetree, Hauke Mehrtens,
Rafał Miłecki, Rob Herring, bcm-kernel-feedback-list,
Dan Haab, linux-arm-kernel
From: Dan Haab <dan.haab@legrand.com>
It's a simple network device based on BCM47094 with just a single
Ethernet port.
Signed-off-by: Dan Haab <dan.haab@legrand.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 53 +++++++++++++++++++++++++++
2 files changed, 54 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b21b3a6..f6b578d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -113,6 +113,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xap-1610.dtb \
bcm47094-luxul-xbr-4500.dtb \
+ bcm47094-luxul-xwc-2000.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
new file mode 100644
index 0000000..3343253
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Legrand AV Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XWC-2000 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
2019-10-02 15:57 ` Dan Haab
(?)
@ 2019-10-15 23:14 ` Florian Fainelli
-1 siblings, 0 replies; 3+ messages in thread
From: Florian Fainelli @ 2019-10-15 23:14 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Dan Haab
Cc: Mark Rutland, devicetree, Hauke Mehrtens,
Rafał Miłecki, Rob Herring, Dan Haab, linux-arm-kernel
On Wed, 2 Oct 2019 09:57:26 -0600, Dan Haab <riproute@gmail.com> wrote:
> From: Dan Haab <dan.haab@legrand.com>
>
> It's a simple network device based on BCM47094 with just a single
> Ethernet port.
>
> Signed-off-by: Dan Haab <dan.haab@legrand.com>
> ---
Applied to devicetree/next, thanks!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-10-15 23:14 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-02 15:57 [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000 Dan Haab
2019-10-02 15:57 ` Dan Haab
2019-10-15 23:14 ` Florian Fainelli
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.