From: Kalle Valo <kvalo@codeaurora.org>
To: linux-wireless@vger.kernel.org
Cc: ath11k@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH v2 01/49] dt: bindings: net: add qcom,ath11k.yaml
Date: Sun, 20 Oct 2019 13:03:19 +0300 [thread overview]
Message-ID: <1571565847-10338-2-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1571565847-10338-1-git-send-email-kvalo@codeaurora.org>
ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a
bindings document for the driver, first documenting IPQ8074 which is the
only device ath11k currently supports.
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../bindings/net/wireless/qcom,ath11k.yaml | 277 +++++++++++++++++++++
1 file changed, 277 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
new file mode 100644
index 000000000000..5d25542f85f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: BSD-3-Clause-Clear
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath11k wireless devices Generic Binding
+
+maintainers:
+ - Kalle Valo <kvalo@codeaurora.org>
+
+description: |
+ These are dt entries used on ath11k driver. AHB based ipq8074 uses most of the properties defined in this doc.
+
+properties:
+ compatible:
+ const: "qcom,ipq8074-wifi"
+
+ reg:
+ description: Address and length of the register set for the device
+ maxItems: 1
+
+ interrupts:
+ minItems: 53
+ maxItems: 53
+ items:
+ - description: misc-pulse1 interrupt events
+ - description: misc-latch interrupt events
+ - description: sw exception interrupt events
+ - description: watchdog interrupt events
+ - description: interrupt event for ring CE0
+ - description: interrupt event for ring CE1
+ - description: interrupt event for ring CE2
+ - description: interrupt event for ring CE3
+ - description: interrupt event for ring CE4
+ - description: interrupt event for ring CE5
+ - description: interrupt event for ring CE6
+ - description: interrupt event for ring CE7
+ - description: interrupt event for ring CE8
+ - description: interrupt event for ring CE9
+ - description: interrupt event for ring CE10
+ - description: interrupt event for ring CE11
+ - description: interrupt event for ring host2wbm-desc-feed
+ - description: interrupt event for ring host2reo-re-injection
+ - description: interrupt event for ring host2reo-command
+ - description: interrupt event for ring host2rxdma-monitor-ring3
+ - description: interrupt event for ring host2rxdma-monitor-ring2
+ - description: interrupt event for ring host2rxdma-monitor-ring1
+ - description: interrupt event for ring reo2ost-exception
+ - description: interrupt event for ring wbm2host-rx-release
+ - description: interrupt event for ring reo2host-status
+ - description: interrupt event for ring reo2host-destination-ring4
+ - description: interrupt event for ring reo2host-destination-ring3
+ - description: interrupt event for ring reo2host-destination-ring2
+ - description: interrupt event for ring reo2host-destination-ring1
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+ - description: interrupt event for ring ppdu-end-interrupts-mac3
+ - description: interrupt event for ring ppdu-end-interrupts-mac2
+ - description: interrupt event for ring ppdu-end-interrupts-mac1
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+ - description: interrupt event for ring rxdma2host-destination-ring-mac3
+ - description: interrupt event for ring rxdma2host-destination-ring-mac2
+ - description: interrupt event for ring rxdma2host-destination-ring-mac1
+ - description: interrupt event for ring host2tcl-input-ring4
+ - description: interrupt event for ring host2tcl-input-ring3
+ - description: interrupt event for ring host2tcl-input-ring2
+ - description: interrupt event for ring host2tcl-input-ring1
+ - description: interrupt event for ring wbm2host-tx-completions-ring3
+ - description: interrupt event for ring wbm2host-tx-completions-ring2
+ - description: interrupt event for ring wbm2host-tx-completions-ring1
+ - description: interrupt event for ring tcl2host-status-ring
+
+
+ interrupt-names:
+ minItems: 53
+ maxItems: 53
+ items:
+ - const: misc-pulse1
+ - const: misc-latch
+ - const: sw-exception
+ - const: watchdog
+ - const: ce0
+ - const: ce1
+ - const: ce2
+ - const: ce3
+ - const: ce4
+ - const: ce5
+ - const: ce6
+ - const: ce7
+ - const: ce8
+ - const: ce9
+ - const: ce10
+ - const: ce11
+ - const: host2wbm-desc-feed
+ - const: host2reo-re-injection
+ - const: host2reo-command
+ - const: host2rxdma-monitor-ring3
+ - const: host2rxdma-monitor-ring2
+ - const: host2rxdma-monitor-ring1
+ - const: reo2ost-exception
+ - const: wbm2host-rx-release
+ - const: reo2host-status
+ - const: reo2host-destination-ring4
+ - const: reo2host-destination-ring3
+ - const: reo2host-destination-ring2
+ - const: reo2host-destination-ring1
+ - const: rxdma2host-monitor-destination-mac3
+ - const: rxdma2host-monitor-destination-mac2
+ - const: rxdma2host-monitor-destination-mac1
+ - const: ppdu-end-interrupts-mac3
+ - const: ppdu-end-interrupts-mac2
+ - const: ppdu-end-interrupts-mac1
+ - const: rxdma2host-monitor-status-ring-mac3
+ - const: rxdma2host-monitor-status-ring-mac2
+ - const: rxdma2host-monitor-status-ring-mac1
+ - const: host2rxdma-host-buf-ring-mac3
+ - const: host2rxdma-host-buf-ring-mac2
+ - const: host2rxdma-host-buf-ring-mac1
+ - const: rxdma2host-destination-ring-mac3
+ - const: rxdma2host-destination-ring-mac2
+ - const: rxdma2host-destination-ring-mac1
+ - const: host2tcl-input-ring4
+ - const: host2tcl-input-ring3
+ - const: host2tcl-input-ring2
+ - const: host2tcl-input-ring1
+ - const: wbm2host-tx-completions-ring3
+ - const: wbm2host-tx-completions-ring2
+ - const: wbm2host-tx-completions-ring1
+ - const: tcl2host-status-ring
+
+ qcom,rproc:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ DT entry of q6v5-wcss remoteproc driver.
+ Phandle to a node that can contain the following properties
+ * compatible
+ * reg
+ * reg-names
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - qcom,rproc
+
+additionalProperties: false
+
+examples:
+ - |
+
+ q6v5_wcss: q6v5_wcss@CD00000 {
+ compatible = "qcom,ipq8074-wcss-pil";
+ reg = <0xCD00000 0x4040>,
+ <0x4AB000 0x20>;
+ reg-names = "qdsp6",
+ "rmb";
+ };
+
+ wifi0: wifi@c000000 {
+ compatible = "qcom,ipq8074-wifi";
+ reg = <0xc000000 0x2000000>;
+ interrupts = <0 320 1>,
+ <0 319 1>,
+ <0 318 1>,
+ <0 317 1>,
+ <0 316 1>,
+ <0 315 1>,
+ <0 314 1>,
+ <0 311 1>,
+ <0 310 1>,
+ <0 411 1>,
+ <0 410 1>,
+ <0 40 1>,
+ <0 39 1>,
+ <0 302 1>,
+ <0 301 1>,
+ <0 37 1>,
+ <0 36 1>,
+ <0 296 1>,
+ <0 295 1>,
+ <0 294 1>,
+ <0 293 1>,
+ <0 292 1>,
+ <0 291 1>,
+ <0 290 1>,
+ <0 289 1>,
+ <0 288 1>,
+ <0 239 1>,
+ <0 236 1>,
+ <0 235 1>,
+ <0 234 1>,
+ <0 233 1>,
+ <0 232 1>,
+ <0 231 1>,
+ <0 230 1>,
+ <0 229 1>,
+ <0 228 1>,
+ <0 224 1>,
+ <0 223 1>,
+ <0 203 1>,
+ <0 183 1>,
+ <0 180 1>,
+ <0 179 1>,
+ <0 178 1>,
+ <0 177 1>,
+ <0 176 1>,
+ <0 163 1>,
+ <0 162 1>,
+ <0 160 1>,
+ <0 159 1>,
+ <0 158 1>,
+ <0 157 1>,
+ <0 156 1>;
+ interrupt-names = "misc-pulse1",
+ "misc-latch",
+ "sw-exception",
+ "watchdog",
+ "ce0",
+ "ce1",
+ "ce2",
+ "ce3",
+ "ce4",
+ "ce5",
+ "ce6",
+ "ce7",
+ "ce8",
+ "ce9",
+ "ce10",
+ "ce11",
+ "host2wbm-desc-feed",
+ "host2reo-re-injection",
+ "host2reo-command",
+ "host2rxdma-monitor-ring3",
+ "host2rxdma-monitor-ring2",
+ "host2rxdma-monitor-ring1",
+ "reo2ost-exception",
+ "wbm2host-rx-release",
+ "reo2host-status",
+ "reo2host-destination-ring4",
+ "reo2host-destination-ring3",
+ "reo2host-destination-ring2",
+ "reo2host-destination-ring1",
+ "rxdma2host-monitor-destination-mac3",
+ "rxdma2host-monitor-destination-mac2",
+ "rxdma2host-monitor-destination-mac1",
+ "ppdu-end-interrupts-mac3",
+ "ppdu-end-interrupts-mac2",
+ "ppdu-end-interrupts-mac1",
+ "rxdma2host-monitor-status-ring-mac3",
+ "rxdma2host-monitor-status-ring-mac2",
+ "rxdma2host-monitor-status-ring-mac1",
+ "host2rxdma-host-buf-ring-mac3",
+ "host2rxdma-host-buf-ring-mac2",
+ "host2rxdma-host-buf-ring-mac1",
+ "rxdma2host-destination-ring-mac3",
+ "rxdma2host-destination-ring-mac2",
+ "rxdma2host-destination-ring-mac1",
+ "host2tcl-input-ring4",
+ "host2tcl-input-ring3",
+ "host2tcl-input-ring2",
+ "host2tcl-input-ring1",
+ "wbm2host-tx-completions-ring3",
+ "wbm2host-tx-completions-ring2",
+ "wbm2host-tx-completions-ring1",
+ "tcl2host-status-ring";
+ qcom,rproc = <&q6v5_wcss>;
+ };
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@codeaurora.org>
To: linux-wireless@vger.kernel.org
Cc: devicetree@vger.kernel.org, ath11k@lists.infradead.org
Subject: [PATCH v2 01/49] dt: bindings: net: add qcom,ath11k.yaml
Date: Sun, 20 Oct 2019 13:03:19 +0300 [thread overview]
Message-ID: <1571565847-10338-2-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1571565847-10338-1-git-send-email-kvalo@codeaurora.org>
ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a
bindings document for the driver, first documenting IPQ8074 which is the
only device ath11k currently supports.
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../bindings/net/wireless/qcom,ath11k.yaml | 277 +++++++++++++++++++++
1 file changed, 277 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
new file mode 100644
index 000000000000..5d25542f85f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: BSD-3-Clause-Clear
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath11k wireless devices Generic Binding
+
+maintainers:
+ - Kalle Valo <kvalo@codeaurora.org>
+
+description: |
+ These are dt entries used on ath11k driver. AHB based ipq8074 uses most of the properties defined in this doc.
+
+properties:
+ compatible:
+ const: "qcom,ipq8074-wifi"
+
+ reg:
+ description: Address and length of the register set for the device
+ maxItems: 1
+
+ interrupts:
+ minItems: 53
+ maxItems: 53
+ items:
+ - description: misc-pulse1 interrupt events
+ - description: misc-latch interrupt events
+ - description: sw exception interrupt events
+ - description: watchdog interrupt events
+ - description: interrupt event for ring CE0
+ - description: interrupt event for ring CE1
+ - description: interrupt event for ring CE2
+ - description: interrupt event for ring CE3
+ - description: interrupt event for ring CE4
+ - description: interrupt event for ring CE5
+ - description: interrupt event for ring CE6
+ - description: interrupt event for ring CE7
+ - description: interrupt event for ring CE8
+ - description: interrupt event for ring CE9
+ - description: interrupt event for ring CE10
+ - description: interrupt event for ring CE11
+ - description: interrupt event for ring host2wbm-desc-feed
+ - description: interrupt event for ring host2reo-re-injection
+ - description: interrupt event for ring host2reo-command
+ - description: interrupt event for ring host2rxdma-monitor-ring3
+ - description: interrupt event for ring host2rxdma-monitor-ring2
+ - description: interrupt event for ring host2rxdma-monitor-ring1
+ - description: interrupt event for ring reo2ost-exception
+ - description: interrupt event for ring wbm2host-rx-release
+ - description: interrupt event for ring reo2host-status
+ - description: interrupt event for ring reo2host-destination-ring4
+ - description: interrupt event for ring reo2host-destination-ring3
+ - description: interrupt event for ring reo2host-destination-ring2
+ - description: interrupt event for ring reo2host-destination-ring1
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+ - description: interrupt event for ring ppdu-end-interrupts-mac3
+ - description: interrupt event for ring ppdu-end-interrupts-mac2
+ - description: interrupt event for ring ppdu-end-interrupts-mac1
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+ - description: interrupt event for ring rxdma2host-destination-ring-mac3
+ - description: interrupt event for ring rxdma2host-destination-ring-mac2
+ - description: interrupt event for ring rxdma2host-destination-ring-mac1
+ - description: interrupt event for ring host2tcl-input-ring4
+ - description: interrupt event for ring host2tcl-input-ring3
+ - description: interrupt event for ring host2tcl-input-ring2
+ - description: interrupt event for ring host2tcl-input-ring1
+ - description: interrupt event for ring wbm2host-tx-completions-ring3
+ - description: interrupt event for ring wbm2host-tx-completions-ring2
+ - description: interrupt event for ring wbm2host-tx-completions-ring1
+ - description: interrupt event for ring tcl2host-status-ring
+
+
+ interrupt-names:
+ minItems: 53
+ maxItems: 53
+ items:
+ - const: misc-pulse1
+ - const: misc-latch
+ - const: sw-exception
+ - const: watchdog
+ - const: ce0
+ - const: ce1
+ - const: ce2
+ - const: ce3
+ - const: ce4
+ - const: ce5
+ - const: ce6
+ - const: ce7
+ - const: ce8
+ - const: ce9
+ - const: ce10
+ - const: ce11
+ - const: host2wbm-desc-feed
+ - const: host2reo-re-injection
+ - const: host2reo-command
+ - const: host2rxdma-monitor-ring3
+ - const: host2rxdma-monitor-ring2
+ - const: host2rxdma-monitor-ring1
+ - const: reo2ost-exception
+ - const: wbm2host-rx-release
+ - const: reo2host-status
+ - const: reo2host-destination-ring4
+ - const: reo2host-destination-ring3
+ - const: reo2host-destination-ring2
+ - const: reo2host-destination-ring1
+ - const: rxdma2host-monitor-destination-mac3
+ - const: rxdma2host-monitor-destination-mac2
+ - const: rxdma2host-monitor-destination-mac1
+ - const: ppdu-end-interrupts-mac3
+ - const: ppdu-end-interrupts-mac2
+ - const: ppdu-end-interrupts-mac1
+ - const: rxdma2host-monitor-status-ring-mac3
+ - const: rxdma2host-monitor-status-ring-mac2
+ - const: rxdma2host-monitor-status-ring-mac1
+ - const: host2rxdma-host-buf-ring-mac3
+ - const: host2rxdma-host-buf-ring-mac2
+ - const: host2rxdma-host-buf-ring-mac1
+ - const: rxdma2host-destination-ring-mac3
+ - const: rxdma2host-destination-ring-mac2
+ - const: rxdma2host-destination-ring-mac1
+ - const: host2tcl-input-ring4
+ - const: host2tcl-input-ring3
+ - const: host2tcl-input-ring2
+ - const: host2tcl-input-ring1
+ - const: wbm2host-tx-completions-ring3
+ - const: wbm2host-tx-completions-ring2
+ - const: wbm2host-tx-completions-ring1
+ - const: tcl2host-status-ring
+
+ qcom,rproc:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ DT entry of q6v5-wcss remoteproc driver.
+ Phandle to a node that can contain the following properties
+ * compatible
+ * reg
+ * reg-names
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - qcom,rproc
+
+additionalProperties: false
+
+examples:
+ - |
+
+ q6v5_wcss: q6v5_wcss@CD00000 {
+ compatible = "qcom,ipq8074-wcss-pil";
+ reg = <0xCD00000 0x4040>,
+ <0x4AB000 0x20>;
+ reg-names = "qdsp6",
+ "rmb";
+ };
+
+ wifi0: wifi@c000000 {
+ compatible = "qcom,ipq8074-wifi";
+ reg = <0xc000000 0x2000000>;
+ interrupts = <0 320 1>,
+ <0 319 1>,
+ <0 318 1>,
+ <0 317 1>,
+ <0 316 1>,
+ <0 315 1>,
+ <0 314 1>,
+ <0 311 1>,
+ <0 310 1>,
+ <0 411 1>,
+ <0 410 1>,
+ <0 40 1>,
+ <0 39 1>,
+ <0 302 1>,
+ <0 301 1>,
+ <0 37 1>,
+ <0 36 1>,
+ <0 296 1>,
+ <0 295 1>,
+ <0 294 1>,
+ <0 293 1>,
+ <0 292 1>,
+ <0 291 1>,
+ <0 290 1>,
+ <0 289 1>,
+ <0 288 1>,
+ <0 239 1>,
+ <0 236 1>,
+ <0 235 1>,
+ <0 234 1>,
+ <0 233 1>,
+ <0 232 1>,
+ <0 231 1>,
+ <0 230 1>,
+ <0 229 1>,
+ <0 228 1>,
+ <0 224 1>,
+ <0 223 1>,
+ <0 203 1>,
+ <0 183 1>,
+ <0 180 1>,
+ <0 179 1>,
+ <0 178 1>,
+ <0 177 1>,
+ <0 176 1>,
+ <0 163 1>,
+ <0 162 1>,
+ <0 160 1>,
+ <0 159 1>,
+ <0 158 1>,
+ <0 157 1>,
+ <0 156 1>;
+ interrupt-names = "misc-pulse1",
+ "misc-latch",
+ "sw-exception",
+ "watchdog",
+ "ce0",
+ "ce1",
+ "ce2",
+ "ce3",
+ "ce4",
+ "ce5",
+ "ce6",
+ "ce7",
+ "ce8",
+ "ce9",
+ "ce10",
+ "ce11",
+ "host2wbm-desc-feed",
+ "host2reo-re-injection",
+ "host2reo-command",
+ "host2rxdma-monitor-ring3",
+ "host2rxdma-monitor-ring2",
+ "host2rxdma-monitor-ring1",
+ "reo2ost-exception",
+ "wbm2host-rx-release",
+ "reo2host-status",
+ "reo2host-destination-ring4",
+ "reo2host-destination-ring3",
+ "reo2host-destination-ring2",
+ "reo2host-destination-ring1",
+ "rxdma2host-monitor-destination-mac3",
+ "rxdma2host-monitor-destination-mac2",
+ "rxdma2host-monitor-destination-mac1",
+ "ppdu-end-interrupts-mac3",
+ "ppdu-end-interrupts-mac2",
+ "ppdu-end-interrupts-mac1",
+ "rxdma2host-monitor-status-ring-mac3",
+ "rxdma2host-monitor-status-ring-mac2",
+ "rxdma2host-monitor-status-ring-mac1",
+ "host2rxdma-host-buf-ring-mac3",
+ "host2rxdma-host-buf-ring-mac2",
+ "host2rxdma-host-buf-ring-mac1",
+ "rxdma2host-destination-ring-mac3",
+ "rxdma2host-destination-ring-mac2",
+ "rxdma2host-destination-ring-mac1",
+ "host2tcl-input-ring4",
+ "host2tcl-input-ring3",
+ "host2tcl-input-ring2",
+ "host2tcl-input-ring1",
+ "wbm2host-tx-completions-ring3",
+ "wbm2host-tx-completions-ring2",
+ "wbm2host-tx-completions-ring1",
+ "tcl2host-status-ring";
+ qcom,rproc = <&q6v5_wcss>;
+ };
_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2019-10-20 10:04 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-20 10:03 [PATCH v2 00/49] ath11k: driver for Qualcomm IEEE 802.11ax devices Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` Kalle Valo [this message]
2019-10-20 10:03 ` [PATCH v2 01/49] dt: bindings: net: add qcom,ath11k.yaml Kalle Valo
2019-10-25 21:30 ` Rob Herring
2019-10-25 21:30 ` Rob Herring
2019-10-27 13:28 ` Kalle Valo
2019-10-27 13:28 ` Kalle Valo
2019-10-27 20:56 ` Rob Herring
2019-10-27 20:56 ` Rob Herring
2019-11-05 14:55 ` Kalle Valo
2019-11-05 14:55 ` Kalle Valo
2019-11-07 15:38 ` Kalle Valo
2019-11-07 15:38 ` Kalle Valo
2019-11-15 12:18 ` Kalle Valo
2019-11-15 12:18 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 02/49] ath11k: add Kconfig Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-21 20:53 ` Jeff Johnson
2019-10-21 20:53 ` Jeff Johnson
2019-11-07 16:04 ` Kalle Valo
2019-11-07 16:04 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 03/49] ath11k: add Makefile Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 04/49] ath11k: add ahb.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 05/49] ath11k: add ahb.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 06/49] ath11k: add ce.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 07/49] ath11k: add ce.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 08/49] ath11k: add core.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 09/49] ath11k: add core.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 10/49] ath11k: add debug.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 11/49] ath11k: add debug.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 12/49] ath11k: add debug_htt_stats.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 13/49] ath11k: add debug_htt_stats.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 14/49] ath11k: add debugfs_sta.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 15/49] ath11k: add dp.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 16/49] ath11k: add dp.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 17/49] ath11k: add dp_rx.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 18/49] ath11k: add dp_rx.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 19/49] ath11k: add dp_tx.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 20/49] ath11k: add dp_tx.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 21/49] ath11k: add hal.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 22/49] ath11k: add hal.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 23/49] ath11k: add hal_desc.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 24/49] ath11k: add hal_rx.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 25/49] ath11k: add hal_rx.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 26/49] ath11k: add hal_tx.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 27/49] ath11k: add hal_tx.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 28/49] ath11k: add htc.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 29/49] ath11k: add htc.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 30/49] ath11k: add hw.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 31/49] ath11k: add mac.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 32/49] ath11k: add mac.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 33/49] ath11k: add peer.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 34/49] ath11k: add peer.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 35/49] ath11k: add qmi.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 36/49] ath11k: add qmi.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 37/49] ath11k: add reg.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 38/49] ath11k: add reg.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 39/49] ath11k: add rx_desc.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 40/49] ath11k: add testmode.c Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:03 ` [PATCH v2 41/49] ath11k: add testmode.h Kalle Valo
2019-10-20 10:03 ` Kalle Valo
2019-10-20 10:04 ` [PATCH v2 42/49] ath11k: add testmode_i.h Kalle Valo
2019-10-20 10:04 ` Kalle Valo
2019-10-20 10:04 ` [PATCH v2 43/49] ath11k: add trace.c Kalle Valo
2019-10-20 10:04 ` Kalle Valo
2019-10-20 10:04 ` [PATCH v2 44/49] ath11k: add trace.h Kalle Valo
2019-10-20 10:04 ` Kalle Valo
2019-10-20 10:04 ` [PATCH v2 45/49] ath11k: add wmi.c Kalle Valo
2019-10-20 10:04 ` Kalle Valo
2019-10-20 10:04 ` [PATCH v2 46/49] ath11k: add wmi.h Kalle Valo
2019-10-20 10:04 ` Kalle Valo
2019-10-20 10:04 ` [PATCH v2 47/49] ath: add ath11k to Makefile Kalle Valo
2019-10-20 10:04 ` Kalle Valo
2019-10-20 10:04 ` [PATCH v2 48/49] ath: add ath11k to Kconfig Kalle Valo
2019-10-20 10:04 ` Kalle Valo
2019-10-20 10:04 ` [PATCH v2 49/49] MAINTAINERS: add ath11k Kalle Valo
2019-10-20 10:04 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1571565847-10338-2-git-send-email-kvalo@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.