* [PATCHv4 1/4] serial-uartlite: Change logic how console_port is setup
@ 2019-11-12 10:41 shubhrajyoti.datta
2019-11-12 10:41 ` [PATCHv4 2/4] serial-uartlite: Use allocated structure instead of static ones shubhrajyoti.datta
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: shubhrajyoti.datta @ 2019-11-12 10:41 UTC (permalink / raw)
To: linux-serial; +Cc: gregkh, jacmet, Shubhrajyoti Datta
From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Change logic how console_port is setup by using CON_ENABLED flag
instead of index. There will be unique uart_console
structure that's why code can't use id for console_port
assignment.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
---
v5: fix a compilation failure.
drivers/tty/serial/uartlite.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 06e79c1..8b39b2b 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -665,7 +665,7 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq,
* If register_console() don't assign value, then console_port pointer
* is cleanup.
*/
- if (ulite_uart_driver.cons->index == -1)
+ if (!console_port)
console_port = port;
#endif
@@ -680,7 +680,8 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq,
#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
/* This is not port which is used for console that's why clean it up */
- if (ulite_uart_driver.cons->index == -1)
+ if (console_port == port &&
+ !(ulite_uart_driver.cons->flags & CON_ENABLED))
console_port = NULL;
#endif
@@ -864,6 +865,11 @@ static int ulite_remove(struct platform_device *pdev)
clk_unprepare(pdata->clk);
rc = ulite_release(&pdev->dev);
+#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
+ if (console_port == port)
+ console_port = NULL;
+#endif
+
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
--
2.1.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCHv4 2/4] serial-uartlite: Use allocated structure instead of static ones
2019-11-12 10:41 [PATCHv4 1/4] serial-uartlite: Change logic how console_port is setup shubhrajyoti.datta
@ 2019-11-12 10:41 ` shubhrajyoti.datta
2019-11-12 10:41 ` [PATCHv4 3/4] serial-uartlite: Remove ULITE_NR_PORTS macro shubhrajyoti.datta
2019-11-12 10:41 ` [PATCHv4 4/4] serial: uartlite: Fix compilation issue on !OF platforms shubhrajyoti.datta
2 siblings, 0 replies; 5+ messages in thread
From: shubhrajyoti.datta @ 2019-11-12 10:41 UTC (permalink / raw)
To: linux-serial; +Cc: gregkh, jacmet, Shubhrajyoti Datta, Michal Simek
From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Remove the use of the static uartlite structure.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/tty/serial/uartlite.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 8b39b2b..4d431a2 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -670,7 +670,7 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq,
#endif
/* Register the port */
- rc = uart_add_one_port(&ulite_uart_driver, port);
+ rc = uart_add_one_port(pdata->ulite_uart_driver, port);
if (rc) {
dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc);
port->mapbase = 0;
@@ -681,7 +681,7 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq,
#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
/* This is not port which is used for console that's why clean it up */
if (console_port == port &&
- !(ulite_uart_driver.cons->flags & CON_ENABLED))
+ !(pdata->ulite_uart_driver->cons->flags & CON_ENABLED))
console_port = NULL;
#endif
--
2.1.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCHv4 3/4] serial-uartlite: Remove ULITE_NR_PORTS macro
2019-11-12 10:41 [PATCHv4 1/4] serial-uartlite: Change logic how console_port is setup shubhrajyoti.datta
2019-11-12 10:41 ` [PATCHv4 2/4] serial-uartlite: Use allocated structure instead of static ones shubhrajyoti.datta
@ 2019-11-12 10:41 ` shubhrajyoti.datta
2019-11-12 10:41 ` [PATCHv4 4/4] serial: uartlite: Fix compilation issue on !OF platforms shubhrajyoti.datta
2 siblings, 0 replies; 5+ messages in thread
From: shubhrajyoti.datta @ 2019-11-12 10:41 UTC (permalink / raw)
To: linux-serial; +Cc: gregkh, jacmet, Shubhrajyoti Datta, Michal Simek
From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
This patch is removing ULITE_NR_PORTS macro which limits number of
ports which can be used. Every instance is registering own struct
uart_driver with minor number which corresponds to alias ID (or 0 now).
and with 1 uart port. The same alias ID is saved to
tty_driver->name_base which is key field for creating ttyULX name.
Because name_base and minor number are setup already there is no need to
setup any port->line number because 0 is the right value.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/tty/serial/uartlite.c | 251 ++++++++++++++++++++++++++++++------------
1 file changed, 180 insertions(+), 71 deletions(-)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 4d431a2..1bc3e59 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -27,7 +27,6 @@
#define ULITE_NAME "ttyUL"
#define ULITE_MAJOR 204
#define ULITE_MINOR 187
-#define ULITE_NR_UARTS CONFIG_SERIAL_UARTLITE_NR_UARTS
/* ---------------------------------------------------------------------
* Register definitions
@@ -65,6 +64,7 @@ static struct uart_port *console_port;
struct uartlite_data {
const struct uartlite_reg_ops *reg_ops;
struct clk *clk;
+ int id;
struct uart_driver *ulite_uart_driver;
};
@@ -117,7 +117,6 @@ static inline void uart_out32(u32 val, u32 offset, struct uart_port *port)
pdata->reg_ops->out(val, port->membase + offset);
}
-static struct uart_port ulite_ports[ULITE_NR_UARTS];
/* ---------------------------------------------------------------------
* Core UART driver operations
@@ -535,18 +534,6 @@ static int ulite_console_setup(struct console *co, char *options)
return uart_set_options(port, co, baud, parity, bits, flow);
}
-static struct uart_driver ulite_uart_driver;
-
-static struct console ulite_console = {
- .name = ULITE_NAME,
- .write = ulite_console_write,
- .device = uart_console_device,
- .setup = ulite_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */
- .data = &ulite_uart_driver,
-};
-
static void early_uartlite_putc(struct uart_port *port, int c)
{
/*
@@ -590,18 +577,6 @@ OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a", early_uartlite_setup
#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
-static struct uart_driver ulite_uart_driver = {
- .owner = THIS_MODULE,
- .driver_name = "uartlite",
- .dev_name = ULITE_NAME,
- .major = ULITE_MAJOR,
- .minor = ULITE_MINOR,
- .nr = ULITE_NR_UARTS,
-#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
- .cons = &ulite_console,
-#endif
-};
-
/* ---------------------------------------------------------------------
* Port assignment functions (mapping devices to uart_port structures)
*/
@@ -622,24 +597,9 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq,
struct uart_port *port;
int rc;
- /* if id = -1; then scan for a free id and use that */
- if (id < 0) {
- for (id = 0; id < ULITE_NR_UARTS; id++)
- if (ulite_ports[id].mapbase == 0)
- break;
- }
- if (id < 0 || id >= ULITE_NR_UARTS) {
- dev_err(dev, "%s%i too large\n", ULITE_NAME, id);
- return -EINVAL;
- }
-
- if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) {
- dev_err(dev, "cannot assign to %s%i; it is already in use\n",
- ULITE_NAME, id);
- return -EBUSY;
- }
-
- port = &ulite_ports[id];
+ port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
spin_lock_init(&port->lock);
port->fifosize = 16;
@@ -653,7 +613,6 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq,
port->flags = UPF_BOOT_AUTOCONF;
port->dev = dev;
port->type = PORT_UNKNOWN;
- port->line = id;
port->private_data = pdata;
dev_set_drvdata(dev, port);
@@ -783,11 +742,24 @@ static const struct of_device_id ulite_of_match[] = {
MODULE_DEVICE_TABLE(of, ulite_of_match);
#endif /* CONFIG_OF */
-static int ulite_probe(struct platform_device *pdev)
+/*
+ * Maximum number of instances without alias IDs but if there is alias
+ * which target "< MAX_UART_INSTANCES" range this ID can't be used.
+ */
+#define MAX_UART_INSTANCES 256
+
+/* Stores static aliases list */
+static DECLARE_BITMAP(alias_bitmap, MAX_UART_INSTANCES);
+static int alias_bitmap_initialized;
+
+/* Stores actual bitmap of allocated IDs with alias IDs together */
+static DECLARE_BITMAP(bitmap, MAX_UART_INSTANCES);
+/* Protect bitmap operations to have unique IDs */
+static DEFINE_MUTEX(bitmap_lock);
+
+static int ulite_get_id(struct platform_device *pdev)
{
- struct resource *res;
- struct uartlite_data *pdata;
- int irq, ret;
+ int ret;
int id = pdev->id;
#ifdef CONFIG_OF
const __be32 *prop;
@@ -796,39 +768,158 @@ static int ulite_probe(struct platform_device *pdev)
if (prop)
id = be32_to_cpup(prop);
#endif
- if (id < 0) {
- /* Look for a serialN alias */
- id = of_alias_get_id(pdev->dev.of_node, "serial");
- if (id < 0)
- id = 0;
- }
- if (!ulite_uart_driver.state) {
- dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
- ret = uart_register_driver(&ulite_uart_driver);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to register driver\n");
+ mutex_lock(&bitmap_lock);
+
+ /* Alias list is stable that's why get alias bitmap only once */
+ if (!alias_bitmap_initialized) {
+ ret = of_alias_get_alias_list(ulite_of_match, "serial",
+ alias_bitmap, MAX_UART_INSTANCES);
+ if (ret) {
+ mutex_unlock(&bitmap_lock);
return ret;
}
+
+ alias_bitmap_initialized++;
}
+ /* Make sure that alias ID is not taken by instance without alias */
+ bitmap_or(bitmap, bitmap, alias_bitmap, MAX_UART_INSTANCES);
+
+ dev_dbg(&pdev->dev, "Alias bitmap: %*pb\n",
+ MAX_UART_INSTANCES, bitmap);
+
+ /* Look for a serialN alias */
+ if (id < 0)
+ id = of_alias_get_id(pdev->dev.of_node, "serial");
+
+ if (id < 0) {
+ dev_warn(&pdev->dev,
+ "No serial alias passed. Using the first free id\n");
+
+ /*
+ * Start with id 0 and check if there is no serial0 alias
+ * which points to device which is compatible with this driver.
+ * If alias exists then try next free position.
+ */
+ id = 0;
+
+ for (;;) {
+ dev_info(&pdev->dev, "Checking id %d\n", id);
+ id = find_next_zero_bit(bitmap, MAX_UART_INSTANCES, id);
+
+ /* No free empty instance */
+ if (id == MAX_UART_INSTANCES) {
+ dev_err(&pdev->dev, "No free ID\n");
+ mutex_unlock(&bitmap_lock);
+ return -EINVAL;
+ }
+
+ dev_dbg(&pdev->dev, "The empty id is %d\n", id);
+ /* Check if ID is empty */
+ if (!test_and_set_bit(id, bitmap)) {
+ /* Break the loop if bit is taken */
+ dev_dbg(&pdev->dev,
+ "Selected ID %d allocation passed\n",
+ id);
+ break;
+ }
+ dev_dbg(&pdev->dev,
+ "Selected ID %d allocation failed\n", id);
+ /* if taking bit fails then try next one */
+ id++;
+ }
+ }
+
+ mutex_unlock(&bitmap_lock);
+
+ return id;
+}
+
+static int ulite_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct uartlite_data *pdata;
+ int irq, ret;
+ struct uart_driver *ulite_uart_driver;
+ char *driver_name;
+#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
+ struct console *ulite_console;
+#endif
+
pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data),
GFP_KERNEL);
if (!pdata)
return -ENOMEM;
+ ulite_uart_driver = devm_kzalloc(&pdev->dev,
+ sizeof(*ulite_uart_driver),
+ GFP_KERNEL);
+ if (!ulite_uart_driver)
+ return -ENOMEM;
+
+ pdata->id = ulite_get_id(pdev);
+ if (pdata->id < 0)
+ return pdata->id;
+
+ /* There is a need to use unique driver name */
+ driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
+ ULITE_NAME, pdata->id);
+ if (!driver_name) {
+ ret = -ENOMEM;
+ goto err_out_id;
+ }
+
+ ulite_uart_driver->owner = THIS_MODULE;
+ ulite_uart_driver->driver_name = driver_name;
+ ulite_uart_driver->dev_name = ULITE_NAME;
+ ulite_uart_driver->major = ULITE_MAJOR;
+ ulite_uart_driver->minor = pdata->id;
+ ulite_uart_driver->nr = 1;
+#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
+ ulite_console = devm_kzalloc(&pdev->dev, sizeof(*ulite_console),
+ GFP_KERNEL);
+ if (!ulite_console) {
+ ret = -ENOMEM;
+ goto err_out_id;
+ }
+
+ strncpy(ulite_console->name, ULITE_NAME,
+ sizeof(ulite_console->name));
+ ulite_console->index = pdata->id;
+ ulite_console->write = ulite_console_write;
+ ulite_console->device = uart_console_device;
+ ulite_console->setup = ulite_console_setup;
+ ulite_console->flags = CON_PRINTBUFFER;
+ ulite_uart_driver->cons = ulite_console;
+ ulite_console->data = ulite_uart_driver;
+#endif
+
+ dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
+ ret = uart_register_driver(ulite_uart_driver);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register driver\n");
+ goto err_out_id;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
+ if (!res) {
+ ret = -ENODEV;
+ goto err_out_unregister_driver;
+ }
irq = platform_get_irq(pdev, 0);
- if (irq <= 0)
- return -ENXIO;
+ if (irq <= 0) {
+ ret = -ENXIO;
+ goto err_out_unregister_driver;
+ }
pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
if (IS_ERR(pdata->clk)) {
- if (PTR_ERR(pdata->clk) != -ENOENT)
- return PTR_ERR(pdata->clk);
+ if (PTR_ERR(pdata->clk) != -ENOENT) {
+ ret = PTR_ERR(pdata->clk);
+ goto err_out_unregister_driver;
+ }
/*
* Clock framework support is optional, continue on
@@ -837,11 +928,10 @@ static int ulite_probe(struct platform_device *pdev)
pdata->clk = NULL;
}
- pdata->ulite_uart_driver = &ulite_uart_driver;
ret = clk_prepare_enable(pdata->clk);
if (ret) {
dev_err(&pdev->dev, "Failed to prepare clock\n");
- return ret;
+ goto err_out_unregister_driver;
}
pm_runtime_use_autosuspend(&pdev->dev);
@@ -849,11 +939,27 @@ static int ulite_probe(struct platform_device *pdev)
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- ret = ulite_assign(&pdev->dev, id, res->start, irq, pdata);
+ ulite_uart_driver->tty_driver->name_base = pdata->id;
+ pdata->ulite_uart_driver = ulite_uart_driver;
+ ret = ulite_assign(&pdev->dev, pdata->id, res->start, irq, pdata);
+ if (ret < 0)
+ goto err_out_clk_disable;
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
+ return 0;
+err_out_clk_disable:
+ clk_disable_unprepare(pdata->clk);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+err_out_unregister_driver:
+ uart_unregister_driver(ulite_uart_driver);
+err_out_id:
+ mutex_lock(&bitmap_lock);
+ clear_bit(pdata->id, bitmap);
+ mutex_unlock(&bitmap_lock);
return ret;
}
@@ -865,11 +971,16 @@ static int ulite_remove(struct platform_device *pdev)
clk_unprepare(pdata->clk);
rc = ulite_release(&pdev->dev);
+ mutex_lock(&bitmap_lock);
+ clear_bit(pdata->id, bitmap);
+ mutex_unlock(&bitmap_lock);
+
#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
if (console_port == port)
console_port = NULL;
#endif
+ uart_unregister_driver(pdata->ulite_uart_driver);
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
@@ -903,8 +1014,6 @@ static int __init ulite_init(void)
static void __exit ulite_exit(void)
{
platform_driver_unregister(&ulite_platform_driver);
- if (ulite_uart_driver.state)
- uart_unregister_driver(&ulite_uart_driver);
}
module_init(ulite_init);
--
2.1.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCHv4 4/4] serial: uartlite: Fix compilation issue on !OF platforms
2019-11-12 10:41 [PATCHv4 1/4] serial-uartlite: Change logic how console_port is setup shubhrajyoti.datta
2019-11-12 10:41 ` [PATCHv4 2/4] serial-uartlite: Use allocated structure instead of static ones shubhrajyoti.datta
2019-11-12 10:41 ` [PATCHv4 3/4] serial-uartlite: Remove ULITE_NR_PORTS macro shubhrajyoti.datta
@ 2019-11-12 10:41 ` shubhrajyoti.datta
2019-11-13 11:23 ` Greg KH
2 siblings, 1 reply; 5+ messages in thread
From: shubhrajyoti.datta @ 2019-11-12 10:41 UTC (permalink / raw)
To: linux-serial; +Cc: gregkh, jacmet, Michal Simek, Shubhrajyoti Datta
From: Michal Simek <michal.simek@xilinx.com>
There is missing ulite_of_match on !OF platforms.
Use of_match_ptr() to fix it.
Warning log:
drivers/tty/serial/uartlite.c: In function ‘ulite_get_id’:
drivers/tty/serial/uartlite.c:774:33: error: ‘ulite_of_match’ undeclared
(first use in this function)
ret = of_alias_get_alias_list(ulite_of_match, "serial",
^
drivers/tty/serial/uartlite.c:774:33: note: each undeclared identifier
is reported only once for each function it appears in
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
---
v5:
new patch addition
drivers/tty/serial/uartlite.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 1bc3e59..19f68f3 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -773,8 +773,9 @@ static int ulite_get_id(struct platform_device *pdev)
/* Alias list is stable that's why get alias bitmap only once */
if (!alias_bitmap_initialized) {
- ret = of_alias_get_alias_list(ulite_of_match, "serial",
- alias_bitmap, MAX_UART_INSTANCES);
+ ret = of_alias_get_alias_list(of_match_ptr(ulite_of_match),
+ "serial", alias_bitmap,
+ MAX_UART_INSTANCES);
if (ret) {
mutex_unlock(&bitmap_lock);
return ret;
--
2.1.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCHv4 4/4] serial: uartlite: Fix compilation issue on !OF platforms
2019-11-12 10:41 ` [PATCHv4 4/4] serial: uartlite: Fix compilation issue on !OF platforms shubhrajyoti.datta
@ 2019-11-13 11:23 ` Greg KH
0 siblings, 0 replies; 5+ messages in thread
From: Greg KH @ 2019-11-13 11:23 UTC (permalink / raw)
To: shubhrajyoti.datta; +Cc: linux-serial, jacmet, Michal Simek, Shubhrajyoti Datta
On Tue, Nov 12, 2019 at 04:11:11PM +0530, shubhrajyoti.datta@gmail.com wrote:
> From: Michal Simek <michal.simek@xilinx.com>
>
> There is missing ulite_of_match on !OF platforms.
> Use of_match_ptr() to fix it.
>
> Warning log:
> drivers/tty/serial/uartlite.c: In function ‘ulite_get_id’:
> drivers/tty/serial/uartlite.c:774:33: error: ‘ulite_of_match’ undeclared
> (first use in this function)
> ret = of_alias_get_alias_list(ulite_of_match, "serial",
> ^
> drivers/tty/serial/uartlite.c:774:33: note: each undeclared identifier
> is reported only once for each function it appears in
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> ---
> v5:
> new patch addition
This needs to get merged into the previous patch as I can not take any
single patch that breaks the build, sorry.
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-11-13 11:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-12 10:41 [PATCHv4 1/4] serial-uartlite: Change logic how console_port is setup shubhrajyoti.datta
2019-11-12 10:41 ` [PATCHv4 2/4] serial-uartlite: Use allocated structure instead of static ones shubhrajyoti.datta
2019-11-12 10:41 ` [PATCHv4 3/4] serial-uartlite: Remove ULITE_NR_PORTS macro shubhrajyoti.datta
2019-11-12 10:41 ` [PATCHv4 4/4] serial: uartlite: Fix compilation issue on !OF platforms shubhrajyoti.datta
2019-11-13 11:23 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.