* [PATCH v2 net-next] Selftests for bareudp module.
@ 2019-11-14 11:56 Martin Varghese
0 siblings, 0 replies; only message in thread
From: Martin Varghese @ 2019-11-14 11:56 UTC (permalink / raw)
To: netdev, davem, shuah, scott.drennan, jbenc, martin.varghese
Cc: Martin Varghese
From: Martin Varghese <martin.varghese@nokia.com>
Test for MPLSoUDP.
Signed-off-by: Martin Varghese <martinvarghesenokia@gmail.com>
---
tools/testing/selftests/net/test_bareudp.sh | 229 ++++++++++++++++++++++++++++
1 file changed, 229 insertions(+)
create mode 100755 tools/testing/selftests/net/test_bareudp.sh
diff --git a/tools/testing/selftests/net/test_bareudp.sh b/tools/testing/selftests/net/test_bareudp.sh
new file mode 100755
index 0000000..a6dad9c
--- /dev/null
+++ b/tools/testing/selftests/net/test_bareudp.sh
@@ -0,0 +1,229 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for verifying MPLS traffic over bareudp tunnel
+#
+# Trafic between 2 hosts are encapsulated inside an MPLS tunnel and sent over UDP.
+# The PE devices encapsulate IP traffic from Host device in MPLS tunnels.
+# The GW devices encapsulate MPLS traffic from PE devices in UDP tunnels.
+#
+#
+# +-------------------+ +-------------------+
+# | | | |
+# | host-1 netns | | host-2 netns |
+# | | | |
+# | +-------------+ | | +-------------+ |
+# | | pe-h1-h | | | | pe-h2-h | |
+# | | 1.1.1.2/24 | | | | 2.1.1.2/24 | |
+# | +-------------+ | | +-------------+ |
+# | . | | . |
+# +-------------------+ +-------------------+
+# . .
+# . IP Traffic . IP Traffic .
+# . .
+# . .
+# +-------------------------------+ +-------------------------------+
+# | . | | . |
+# | . PE-1 netns | | . PE-2 netns |
+# | +------------------+ | | +---------------+ |
+# | | pe-h1-pe | | | | pe-h2-pe | |
+# | | 1.1.1.1/24 | | | | 2.1.1.1/24 | |
+# | +------------------+ | | +---------------+ |
+# | +------------------+ | | +- -------------+ |
+# | | gw-pe1-pe | | | | gw-pe2-pe | |
+# | | 3.1.1.2/24 | | | | 3.1.1.2/24 | |
+# | +------------------+ | | +---------------+ |
+# | . | | . . |
+# +-------------------------------+ +-------------------------------+
+# . .
+# . .
+# . MPLS Traffic . MPLS Traffic
+# . .
+# +-------------------------------+ +-------------------------------+
+# | . | | . |
+# | . GW-1 netns | | . GW-2 netns |
+# | +------------------+ | | +--------------+ |
+# | | gw-pe1-pe | | | gw-pe2-pe | |
+# | | 3.1.1.3/24 | | | | 3.1.1.3/24 | |
+# | +------------------+ | | +--------------+ |
+# | +------------------+ | | +---------------+ |
+# | | gw-peer-1 | | UDP Tunnel| | gw-peer-2 | |
+# | | 9.1.1.2/24 |. . . . |. . . . . .| .| 9.1.1.3/24 | |
+# | +------------------+ | | +---------------+ |
+# | | | . |
+# +-------------------------------+ +-------------------------------+
+#
+
+cleanup() {
+ local i
+
+ if [ $setup_start == 0 ]
+ then
+ return
+ fi
+
+ for ((i = 1; i <= $num_hosts; ++i)); do
+ ip netns del host-$i || true
+ done
+
+ for ((i = 1; i <= $num_pes; ++i)); do
+ ip netns del pe-$i || true
+ done
+ ip netns del gw-1 || true
+ ip netns del gw-2 || true
+
+}
+
+# Clean start
+cleanup &> /dev/null
+
+[[ $1 == "clean" ]] && exit 0
+
+trap cleanup EXIT
+
+set -e
+
+num_hosts=2
+num_pes=2
+
+setup_start=0
+
+
+setup_pe() {
+ local id=$1
+ ip netns exec pe-$id sysctl -w net.mpls.platform_labels=1000
+}
+
+create_mpls_tunnel() {
+ local id=$1
+ local net=$2
+ local label=$3
+ local gw=$4
+ ip -netns pe-$id route add $net encap mpls $label via inet $gw dev \
+ gw-pe$id-pe
+}
+
+pe_add_label_route() {
+ local id=$1
+ local host=$3
+ local label=$2
+ ip -netns pe-$id -f mpls route add $label via inet $host dev pe-h$id-pe
+}
+
+create_veth_interfaces()
+{
+ local i
+
+ for ((i = 1; i <= $num_hosts; ++i)); do
+ ip link add pe-h$i-h type veth peer name pe-h$i-pe
+ done
+ for ((i = 1; i <= $num_pes; ++i)); do
+ ip link add gw-pe$i-pe type veth peer name gw-pe$i-gw
+ done
+}
+
+create_hosts() {
+ local i
+
+ for ((i = 1; i <= $num_hosts; ++i)); do
+ ip netns add host-$i
+ done
+}
+
+create_pes() {
+ local i
+
+ for ((i = 1; i <= $num_pes; ++i)); do
+ ip netns add pe-$i
+ done
+}
+
+connect_pe_gw() {
+ local dc_id=$1
+ local pe_id=$2
+ local tunnel_src_ip=$3
+ local tunnel_dst_ip=$4
+ local pe_net=$5
+ local gw_net=$6
+ ip link set gw-pe$pe_id-pe netns pe-$pe_id
+ ip link set gw-pe$pe_id-gw netns gw-$dc_id
+ ip netns exec gw-$dc_id tc qdisc add dev bareudp0 handle ffff: ingress
+ ip netns exec gw-$dc_id tc qdisc add dev gw-pe$pe_id-gw handle ffff: ingress
+ ip netns exec gw-$dc_id tc filter add dev gw-pe$pe_id-gw protocol 0x8847 \
+ parent ffff: \
+ flower action tunnel_key set src_ip $tunnel_src_ip \
+ dst_ip $tunnel_dst_ip id 0 \
+ action mirred egress redirect dev bareudp0
+ ip netns exec gw-$dc_id tc filter add dev bareudp0 protocol 0x8847 \
+ parent ffff: flower \
+ action mirred egress redirect dev gw-pe$pe_id-gw
+ ip netns exec gw-$dc_id tc filter add dev bareudp0 protocol 0x8847 parent ffff: \
+ flower \
+ action pedit ex munge eth dst set \
+ 00:00:05:00:00:0$pe_id continue
+ ip -netns pe-$pe_id link set gw-pe$pe_id-pe address 00:00:05:00:00:0$pe_id
+ ip -netns pe-$pe_id addr add $pe_net dev gw-pe$pe_id-pe
+ ip -netns pe-$pe_id link set gw-pe$pe_id-pe up
+ ip -netns gw-$dc_id addr add $gw_net dev gw-pe$pe_id-gw
+ ip -netns gw-$dc_id link set gw-pe$pe_id-gw up
+ ip netns exec pe-$pe_id sysctl -w net.mpls.conf.gw-pe$pe_id-pe.input=1
+}
+
+
+connect_host_pe() {
+ local host_id=$1
+ local pe_id=$2
+ local host_net=$3
+ local pe_net=$4
+ local gw=$5
+ ip link set pe-h$host_id-h netns host-$host_id
+ ip link set pe-h$host_id-pe netns pe-$pe_id
+ ip -netns host-$host_id addr add $host_net dev pe-h$host_id-h
+ ip -netns host-$host_id link set pe-h$host_id-h up
+ ip -netns host-$host_id route add default nexthop via $gw
+ ip -netns pe-$pe_id addr add $pe_net dev pe-h$host_id-pe
+ ip -netns pe-$pe_id link set pe-h$host_id-pe up
+ ip netns exec pe-$pe_id sysctl -w net.mpls.conf.pe-h$host_id-pe.input=1
+}
+
+create_gw() {
+ local id=$1
+ local net=$2
+ ip netns add gw-$id
+ ip link set gw-peer-$id netns gw-$id
+
+ ip -netns gw-$id link add dev bareudp0 type bareudp dstport 6635 \
+ ethertype 0x8847
+ ip -netns gw-$id link set bareudp0 up
+ ip -netns gw-$id addr add $net dev gw-peer-$id
+ ip -netns gw-$id link set gw-peer-$id up
+}
+
+echo start test
+modprobe bareudp
+modprobe mpls_router
+setup_start=1
+create_hosts
+create_pes
+ip link add gw-peer-1 type veth peer name gw-peer-2
+create_gw 1 9.1.1.2/24
+create_gw 2 9.1.1.3/24
+echo "dc gws created"
+create_veth_interfaces
+connect_pe_gw 1 1 9.1.1.2 9.1.1.3 3.1.1.2/24 3.1.1.3/24
+connect_pe_gw 2 2 9.1.1.3 9.1.1.2 3.1.1.2/24 3.1.1.3/24
+connect_host_pe 1 1 1.1.1.2/24 1.1.1.1/24 1.1.1.1
+connect_host_pe 2 2 2.1.1.2/24 2.1.1.1/24 2.1.1.1
+
+setup_pe 1
+setup_pe 2
+
+create_mpls_tunnel 1 2.1.1.2/32 200 3.1.1.3
+pe_add_label_route 1 100 1.1.1.2
+create_mpls_tunnel 2 1.1.1.2/32 100 3.1.1.3
+pe_add_label_route 2 200 2.1.1.2
+
+ip netns exec host-1 ping -c 1 -W 1 2.1.1.2 &> /dev/null || (echo "[FAIL]"; false)
+echo "[ OK ]"
+
+
--
1.8.3.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2019-11-14 11:56 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-14 11:56 [PATCH v2 net-next] Selftests for bareudp module Martin Varghese
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.