* [PATCH v2 1/7] dm: rng: Add random number generator(rng) uclass
2019-12-05 8:42 [PATCH v2 0/7] Add a random number generator uclass Sughosh Ganu
@ 2019-12-05 8:42 ` Sughosh Ganu
2019-12-05 8:42 ` [PATCH v2 2/7] clk: stm32mp1: Add a clock entry for RNG1 device Sughosh Ganu
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Sughosh Ganu @ 2019-12-05 8:42 UTC (permalink / raw)
To: u-boot
Add a uclass for reading a random number seed from a random number
generator device.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
---
Changes since V1:
* Add a SPDX header in rng.h
* Change the UCLASS_DRIVER name from hwrng to rng, to be consistent
with the rest of the naming convention
drivers/Kconfig | 2 ++
drivers/Makefile | 1 +
drivers/rng/Kconfig | 7 +++++++
drivers/rng/Makefile | 6 ++++++
drivers/rng/rng-uclass.c | 23 +++++++++++++++++++++++
include/dm/uclass-id.h | 1 +
include/rng.h | 30 ++++++++++++++++++++++++++++++
7 files changed, 70 insertions(+)
create mode 100644 drivers/rng/Kconfig
create mode 100644 drivers/rng/Makefile
create mode 100644 drivers/rng/rng-uclass.c
create mode 100644 include/rng.h
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 9d99ce0..e34a227 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -90,6 +90,8 @@ source "drivers/remoteproc/Kconfig"
source "drivers/reset/Kconfig"
+source "drivers/rng/Kconfig"
+
source "drivers/rtc/Kconfig"
source "drivers/scsi/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 0d1d6bd..50e5c70 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -114,4 +114,5 @@ obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
+obj-$(CONFIG_DM_RNG) += rng/
endif
diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
new file mode 100644
index 0000000..dd44cc0
--- /dev/null
+++ b/drivers/rng/Kconfig
@@ -0,0 +1,7 @@
+config DM_RNG
+ bool "Driver support for Random Number Generator devices"
+ depends on DM
+ help
+ Enable driver model for random number generator(rng) devices.
+ This interface is used to initialise the rng device and to
+ read the random seed from the device.
diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile
new file mode 100644
index 0000000..311705b
--- /dev/null
+++ b/drivers/rng/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2019, Linaro Limited
+#
+
+obj-$(CONFIG_DM_RNG) += rng-uclass.o
diff --git a/drivers/rng/rng-uclass.c b/drivers/rng/rng-uclass.c
new file mode 100644
index 0000000..b6af3b8
--- /dev/null
+++ b/drivers/rng/rng-uclass.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <rng.h>
+
+int dm_rng_read(struct udevice *dev, void *buffer, size_t size)
+{
+ const struct dm_rng_ops *ops = device_get_ops(dev);
+
+ if (!ops->read)
+ return -ENOSYS;
+
+ return ops->read(dev, buffer, size);
+}
+
+UCLASS_DRIVER(rng) = {
+ .name = "rng",
+ .id = UCLASS_RNG,
+};
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 0c563d8..192202d 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -86,6 +86,7 @@ enum uclass_id {
UCLASS_REGULATOR, /* Regulator device */
UCLASS_REMOTEPROC, /* Remote Processor device */
UCLASS_RESET, /* Reset controller device */
+ UCLASS_RNG, /* Random Number Generator */
UCLASS_RTC, /* Real time clock device */
UCLASS_SCSI, /* SCSI device */
UCLASS_SERIAL, /* Serial UART */
diff --git a/include/rng.h b/include/rng.h
new file mode 100644
index 0000000..61d5da9
--- /dev/null
+++ b/include/rng.h
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#if !defined _RNG_H_
+#define _RNG_H_
+
+#include <dm.h>
+
+/**
+ * dm_rng_read() - read a random number seed from the rng device
+ * @buffer: input buffer to put the read random seed into
+ * @size: number of bytes of random seed read
+ *
+ */
+int dm_rng_read(struct udevice *dev, void *buffer, size_t size);
+
+/* struct dm_rng_ops - Operations for the hwrng uclass */
+struct dm_rng_ops {
+ /**
+ * @read() - read a random number seed
+ *
+ * @data: input buffer to read the random seed
+ * @max: total number of bytes to read
+ */
+ int (*read)(struct udevice *dev, void *data, size_t max);
+};
+
+#endif /* _RNG_H_ */
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 2/7] clk: stm32mp1: Add a clock entry for RNG1 device
2019-12-05 8:42 [PATCH v2 0/7] Add a random number generator uclass Sughosh Ganu
2019-12-05 8:42 ` [PATCH v2 1/7] dm: rng: Add random number generator(rng) uclass Sughosh Ganu
@ 2019-12-05 8:42 ` Sughosh Ganu
2019-12-05 8:42 ` [PATCH v2 3/7] stm32mp1: rng: Add a driver for random number generator(rng) device Sughosh Ganu
` (4 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Sughosh Ganu @ 2019-12-05 8:42 UTC (permalink / raw)
To: u-boot
Add an entry for allowing clock enablement for the random number
generator peripheral, RNG1.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
---
drivers/clk/clk_stm32mp1.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c
index 3718970..da66bde 100644
--- a/drivers/clk/clk_stm32mp1.c
+++ b/drivers/clk/clk_stm32mp1.c
@@ -563,6 +563,7 @@ static const struct stm32mp1_clk_gate stm32mp1_clk_gate[] = {
STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 10, GPIOK, _UNKNOWN_SEL),
STM32MP1_CLK_SET_CLR(RCC_MP_AHB5ENSETR, 0, GPIOZ, _UNKNOWN_SEL),
+ STM32MP1_CLK_SET_CLR(RCC_MP_AHB5ENSETR, 6, RNG1_K, _UNKNOWN_SEL),
STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 7, ETHCK_K, _ETH_SEL),
STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 8, ETHTX, _UNKNOWN_SEL),
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 3/7] stm32mp1: rng: Add a driver for random number generator(rng) device
2019-12-05 8:42 [PATCH v2 0/7] Add a random number generator uclass Sughosh Ganu
2019-12-05 8:42 ` [PATCH v2 1/7] dm: rng: Add random number generator(rng) uclass Sughosh Ganu
2019-12-05 8:42 ` [PATCH v2 2/7] clk: stm32mp1: Add a clock entry for RNG1 device Sughosh Ganu
@ 2019-12-05 8:42 ` Sughosh Ganu
2019-12-05 10:43 ` Patrice CHOTARD
2019-12-05 8:42 ` [PATCH v2 4/7] configs: stm32mp15: Enable " Sughosh Ganu
` (3 subsequent siblings)
6 siblings, 1 reply; 9+ messages in thread
From: Sughosh Ganu @ 2019-12-05 8:42 UTC (permalink / raw)
To: u-boot
Add a driver for the rng device found on stm32mp1 platforms. The
driver provides a routine for reading the random number seed from the
hardware device.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
---
Changes since V1:
* Handle review comment from Patrice Chotard to remove the 'inited'
member
drivers/rng/Kconfig | 7 ++
drivers/rng/Makefile | 1 +
drivers/rng/stm32mp1_rng.c | 158 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 166 insertions(+)
create mode 100644 drivers/rng/stm32mp1_rng.c
diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
index dd44cc0..5fc11db 100644
--- a/drivers/rng/Kconfig
+++ b/drivers/rng/Kconfig
@@ -5,3 +5,10 @@ config DM_RNG
Enable driver model for random number generator(rng) devices.
This interface is used to initialise the rng device and to
read the random seed from the device.
+
+config RNG_STM32MP1
+ bool "Enable random number generator for STM32MP1"
+ depends on ARCH_STM32MP && DM_RNG
+ default n
+ help
+ Enable STM32MP1 rng driver.
diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile
index 311705b..699beb3 100644
--- a/drivers/rng/Makefile
+++ b/drivers/rng/Makefile
@@ -4,3 +4,4 @@
#
obj-$(CONFIG_DM_RNG) += rng-uclass.o
+obj-$(CONFIG_RNG_STM32MP1) += stm32mp1_rng.o
diff --git a/drivers/rng/stm32mp1_rng.c b/drivers/rng/stm32mp1_rng.c
new file mode 100644
index 0000000..5cd736d
--- /dev/null
+++ b/drivers/rng/stm32mp1_rng.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <reset.h>
+#include <rng.h>
+
+#include <asm/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+
+#define RNG_CR 0x00
+#define RNG_CR_RNGEN BIT(2)
+#define RNG_CR_CED BIT(5)
+
+#define RNG_SR 0x04
+#define RNG_SR_SEIS BIT(6)
+#define RNG_SR_CEIS BIT(5)
+#define RNG_SR_SECS BIT(2)
+#define RNG_SR_DRDY BIT(0)
+
+#define RNG_DR 0x08
+
+struct stm32_rng_platdata {
+ fdt_addr_t base;
+ struct clk clk;
+ struct reset_ctl rst;
+};
+
+static int stm32_rng_read(struct udevice *dev, void *data, size_t len)
+{
+ int retval = 0, i;
+ u32 sr, count, reg;
+ size_t increment;
+ struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
+
+ while (len > 0) {
+ retval = readl_poll_timeout(pdata->base + RNG_SR, sr,
+ sr & RNG_SR_DRDY, 10000);
+ if (retval)
+ return retval;
+
+ if (sr & (RNG_SR_SEIS | RNG_SR_SECS)) {
+ /* As per SoC TRM */
+ clrbits_le32(pdata->base + RNG_SR, RNG_SR_SEIS);
+ for (i = 0; i < 12; i++)
+ readl(pdata->base + RNG_DR);
+ if (readl(pdata->base + RNG_SR) & RNG_SR_SEIS) {
+ printf("RNG Noise");
+ return -EIO;
+ }
+ /* start again */
+ continue;
+ }
+
+ count = 4;
+ while (len && count) {
+ reg = readl(pdata->base + RNG_DR);
+ memcpy(data, ®, min(len, sizeof(u32)));
+ increment = min(len, sizeof(u32));
+ data += increment;
+ retval += increment;
+ len -= increment;
+ count--;
+ }
+ }
+
+ return retval;
+}
+
+static int stm32_rng_init(struct stm32_rng_platdata *pdata)
+{
+ int err;
+
+ err = clk_enable(&pdata->clk);
+ if (err)
+ return err;
+
+ /* Disable CED */
+ writel(RNG_CR_RNGEN | RNG_CR_CED, pdata->base + RNG_CR);
+
+ /* clear error indicators */
+ writel(0, pdata->base + RNG_SR);
+
+ return 0;
+}
+
+static int stm32_rng_cleanup(struct stm32_rng_platdata *pdata)
+{
+
+ writel(0, pdata->base + RNG_CR);
+
+ return clk_disable(&pdata->clk);
+}
+
+static int stm32_rng_probe(struct udevice *dev)
+{
+ struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
+
+ reset_assert(&pdata->rst);
+ udelay(20);
+ reset_deassert(&pdata->rst);
+
+ return stm32_rng_init(pdata);
+}
+
+static int stm32_rng_remove(struct udevice *dev)
+{
+ struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
+
+ return stm32_rng_cleanup(pdata);
+}
+
+static int stm32_rng_ofdata_to_platdata(struct udevice *dev)
+{
+ struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
+ int err;
+
+ pdata->base = dev_read_addr(dev);
+ if (!pdata->base)
+ return -ENOMEM;
+
+ err = clk_get_by_index(dev, 0, &pdata->clk);
+ if (err)
+ return err;
+
+ err = reset_get_by_index(dev, 0, &pdata->rst);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static const struct dm_rng_ops stm32_rng_ops = {
+ .read = stm32_rng_read,
+};
+
+static const struct udevice_id stm32_rng_match[] = {
+ {
+ .compatible = "st,stm32-rng",
+ },
+ {},
+};
+
+U_BOOT_DRIVER(stm32_rng) = {
+ .name = "stm32-rng",
+ .id = UCLASS_RNG,
+ .of_match = stm32_rng_match,
+ .ops = &stm32_rng_ops,
+ .probe = stm32_rng_probe,
+ .remove = stm32_rng_remove,
+ .platdata_auto_alloc_size = sizeof(struct stm32_rng_platdata),
+ .ofdata_to_platdata = stm32_rng_ofdata_to_platdata,
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 3/7] stm32mp1: rng: Add a driver for random number generator(rng) device
2019-12-05 8:42 ` [PATCH v2 3/7] stm32mp1: rng: Add a driver for random number generator(rng) device Sughosh Ganu
@ 2019-12-05 10:43 ` Patrice CHOTARD
0 siblings, 0 replies; 9+ messages in thread
From: Patrice CHOTARD @ 2019-12-05 10:43 UTC (permalink / raw)
To: u-boot
On 12/5/19 9:42 AM, Sughosh Ganu wrote:
> Add a driver for the rng device found on stm32mp1 platforms. The
> driver provides a routine for reading the random number seed from the
> hardware device.
>
> Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
> ---
>
> Changes since V1:
> * Handle review comment from Patrice Chotard to remove the 'inited'
> member
>
> drivers/rng/Kconfig | 7 ++
> drivers/rng/Makefile | 1 +
> drivers/rng/stm32mp1_rng.c | 158 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 166 insertions(+)
> create mode 100644 drivers/rng/stm32mp1_rng.c
>
> diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
> index dd44cc0..5fc11db 100644
> --- a/drivers/rng/Kconfig
> +++ b/drivers/rng/Kconfig
> @@ -5,3 +5,10 @@ config DM_RNG
> Enable driver model for random number generator(rng) devices.
> This interface is used to initialise the rng device and to
> read the random seed from the device.
> +
> +config RNG_STM32MP1
> + bool "Enable random number generator for STM32MP1"
> + depends on ARCH_STM32MP && DM_RNG
> + default n
> + help
> + Enable STM32MP1 rng driver.
> diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile
> index 311705b..699beb3 100644
> --- a/drivers/rng/Makefile
> +++ b/drivers/rng/Makefile
> @@ -4,3 +4,4 @@
> #
>
> obj-$(CONFIG_DM_RNG) += rng-uclass.o
> +obj-$(CONFIG_RNG_STM32MP1) += stm32mp1_rng.o
> diff --git a/drivers/rng/stm32mp1_rng.c b/drivers/rng/stm32mp1_rng.c
> new file mode 100644
> index 0000000..5cd736d
> --- /dev/null
> +++ b/drivers/rng/stm32mp1_rng.c
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2019, Linaro Limited
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <reset.h>
> +#include <rng.h>
> +
> +#include <asm/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +
> +#define RNG_CR 0x00
> +#define RNG_CR_RNGEN BIT(2)
> +#define RNG_CR_CED BIT(5)
> +
> +#define RNG_SR 0x04
> +#define RNG_SR_SEIS BIT(6)
> +#define RNG_SR_CEIS BIT(5)
> +#define RNG_SR_SECS BIT(2)
> +#define RNG_SR_DRDY BIT(0)
> +
> +#define RNG_DR 0x08
> +
> +struct stm32_rng_platdata {
> + fdt_addr_t base;
> + struct clk clk;
> + struct reset_ctl rst;
> +};
> +
> +static int stm32_rng_read(struct udevice *dev, void *data, size_t len)
> +{
> + int retval = 0, i;
> + u32 sr, count, reg;
> + size_t increment;
> + struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
> +
> + while (len > 0) {
> + retval = readl_poll_timeout(pdata->base + RNG_SR, sr,
> + sr & RNG_SR_DRDY, 10000);
> + if (retval)
> + return retval;
> +
> + if (sr & (RNG_SR_SEIS | RNG_SR_SECS)) {
> + /* As per SoC TRM */
> + clrbits_le32(pdata->base + RNG_SR, RNG_SR_SEIS);
> + for (i = 0; i < 12; i++)
> + readl(pdata->base + RNG_DR);
> + if (readl(pdata->base + RNG_SR) & RNG_SR_SEIS) {
> + printf("RNG Noise");
> + return -EIO;
> + }
> + /* start again */
> + continue;
> + }
> +
> + count = 4;
> + while (len && count) {
> + reg = readl(pdata->base + RNG_DR);
> + memcpy(data, ®, min(len, sizeof(u32)));
> + increment = min(len, sizeof(u32));
> + data += increment;
> + retval += increment;
> + len -= increment;
> + count--;
> + }
> + }
> +
> + return retval;
> +}
> +
> +static int stm32_rng_init(struct stm32_rng_platdata *pdata)
> +{
> + int err;
> +
> + err = clk_enable(&pdata->clk);
> + if (err)
> + return err;
> +
> + /* Disable CED */
> + writel(RNG_CR_RNGEN | RNG_CR_CED, pdata->base + RNG_CR);
> +
> + /* clear error indicators */
> + writel(0, pdata->base + RNG_SR);
> +
> + return 0;
> +}
> +
> +static int stm32_rng_cleanup(struct stm32_rng_platdata *pdata)
> +{
> +
> + writel(0, pdata->base + RNG_CR);
> +
> + return clk_disable(&pdata->clk);
> +}
> +
> +static int stm32_rng_probe(struct udevice *dev)
> +{
> + struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
> +
> + reset_assert(&pdata->rst);
> + udelay(20);
> + reset_deassert(&pdata->rst);
> +
> + return stm32_rng_init(pdata);
> +}
> +
> +static int stm32_rng_remove(struct udevice *dev)
> +{
> + struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
> +
> + return stm32_rng_cleanup(pdata);
> +}
> +
> +static int stm32_rng_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
> + int err;
> +
> + pdata->base = dev_read_addr(dev);
> + if (!pdata->base)
> + return -ENOMEM;
> +
> + err = clk_get_by_index(dev, 0, &pdata->clk);
> + if (err)
> + return err;
> +
> + err = reset_get_by_index(dev, 0, &pdata->rst);
> + if (err)
> + return err;
> +
> + return 0;
> +}
> +
> +static const struct dm_rng_ops stm32_rng_ops = {
> + .read = stm32_rng_read,
> +};
> +
> +static const struct udevice_id stm32_rng_match[] = {
> + {
> + .compatible = "st,stm32-rng",
> + },
> + {},
> +};
> +
> +U_BOOT_DRIVER(stm32_rng) = {
> + .name = "stm32-rng",
> + .id = UCLASS_RNG,
> + .of_match = stm32_rng_match,
> + .ops = &stm32_rng_ops,
> + .probe = stm32_rng_probe,
> + .remove = stm32_rng_remove,
> + .platdata_auto_alloc_size = sizeof(struct stm32_rng_platdata),
> + .ofdata_to_platdata = stm32_rng_ofdata_to_platdata,
> +};
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Thanks
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 4/7] configs: stm32mp15: Enable random number generator(rng) device
2019-12-05 8:42 [PATCH v2 0/7] Add a random number generator uclass Sughosh Ganu
` (2 preceding siblings ...)
2019-12-05 8:42 ` [PATCH v2 3/7] stm32mp1: rng: Add a driver for random number generator(rng) device Sughosh Ganu
@ 2019-12-05 8:42 ` Sughosh Ganu
2019-12-05 8:42 ` [PATCH v2 5/7] sandbox: rng: Add a random number generator(rng) driver Sughosh Ganu
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Sughosh Ganu @ 2019-12-05 8:42 UTC (permalink / raw)
To: u-boot
Enable support for the rng device on the stm32mp15 configs.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
---
configs/stm32mp15_basic_defconfig | 2 ++
configs/stm32mp15_optee_defconfig | 2 ++
configs/stm32mp15_trusted_defconfig | 2 ++
3 files changed, 6 insertions(+)
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 14e1127..725381d 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -140,3 +140,5 @@ CONFIG_VIDEO_STM32_DSI=y
CONFIG_VIDEO_STM32_MAX_XRES=1280
CONFIG_VIDEO_STM32_MAX_YRES=800
CONFIG_FDT_FIXUP_PARTITIONS=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_STM32MP1=y
diff --git a/configs/stm32mp15_optee_defconfig b/configs/stm32mp15_optee_defconfig
index 791c1a9..5e3c826 100644
--- a/configs/stm32mp15_optee_defconfig
+++ b/configs/stm32mp15_optee_defconfig
@@ -124,3 +124,5 @@ CONFIG_VIDEO_STM32_DSI=y
CONFIG_VIDEO_STM32_MAX_XRES=1280
CONFIG_VIDEO_STM32_MAX_YRES=800
CONFIG_FDT_FIXUP_PARTITIONS=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_STM32MP1=y
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index 5556b18..cbdb903 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -123,3 +123,5 @@ CONFIG_VIDEO_STM32_DSI=y
CONFIG_VIDEO_STM32_MAX_XRES=1280
CONFIG_VIDEO_STM32_MAX_YRES=800
CONFIG_FDT_FIXUP_PARTITIONS=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_STM32MP1=y
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 5/7] sandbox: rng: Add a random number generator(rng) driver
2019-12-05 8:42 [PATCH v2 0/7] Add a random number generator uclass Sughosh Ganu
` (3 preceding siblings ...)
2019-12-05 8:42 ` [PATCH v2 4/7] configs: stm32mp15: Enable " Sughosh Ganu
@ 2019-12-05 8:42 ` Sughosh Ganu
2019-12-05 8:42 ` [PATCH v2 6/7] configs: sandbox: Enable random number generator(rng) device Sughosh Ganu
2019-12-05 8:43 ` [PATCH v2 7/7] test: rng: Add basic test for random number generator(rng) uclass Sughosh Ganu
6 siblings, 0 replies; 9+ messages in thread
From: Sughosh Ganu @ 2019-12-05 8:42 UTC (permalink / raw)
To: u-boot
Add a sandbox driver for random number generation. Mostly aimed at
providing a unit test for rng uclass.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/sandbox/dts/test.dts | 4 ++++
drivers/rng/Kconfig | 7 +++++++
drivers/rng/Makefile | 1 +
drivers/rng/sandbox_rng.c | 36 ++++++++++++++++++++++++++++++++++++
4 files changed, 48 insertions(+)
create mode 100644 drivers/rng/sandbox_rng.c
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index fdb08f2..2c85540 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -599,6 +599,10 @@
reset-names = "other", "test";
};
+ rng at 0 {
+ compatible = "sandbox,sandbox-rng";
+ };
+
rproc_1: rproc at 1 {
compatible = "sandbox,test-processor";
remoteproc-name = "remoteproc-test-dev1";
diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
index 5fc11db..3a1d3f0 100644
--- a/drivers/rng/Kconfig
+++ b/drivers/rng/Kconfig
@@ -6,6 +6,13 @@ config DM_RNG
This interface is used to initialise the rng device and to
read the random seed from the device.
+config RNG_SANDBOX
+ bool "Sandbox random number generator"
+ depends on SANDBOX && DM_RNG
+ help
+ Enable random number generator for sandbox. This is an
+ emulation of a rng device.
+
config RNG_STM32MP1
bool "Enable random number generator for STM32MP1"
depends on ARCH_STM32MP && DM_RNG
diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile
index 699beb3..3517005 100644
--- a/drivers/rng/Makefile
+++ b/drivers/rng/Makefile
@@ -4,4 +4,5 @@
#
obj-$(CONFIG_DM_RNG) += rng-uclass.o
+obj-$(CONFIG_RNG_SANDBOX) += sandbox_rng.o
obj-$(CONFIG_RNG_STM32MP1) += stm32mp1_rng.o
diff --git a/drivers/rng/sandbox_rng.c b/drivers/rng/sandbox_rng.c
new file mode 100644
index 0000000..c5be552
--- /dev/null
+++ b/drivers/rng/sandbox_rng.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <rng.h>
+
+static unsigned long random = 0xdeadbeef;
+
+static int sandbox_rng_read(struct udevice *dev, void *data, size_t len)
+{
+ random ^= ~0UL;
+ *(unsigned long *)data = random;
+
+ return sizeof(random);
+}
+
+static const struct dm_rng_ops sandbox_rng_ops = {
+ .read = sandbox_rng_read,
+};
+
+static const struct udevice_id sandbox_rng_match[] = {
+ {
+ .compatible = "sandbox,sandbox-rng",
+ },
+ {},
+};
+
+U_BOOT_DRIVER(sandbox_rng) = {
+ .name = "sandbox-rng",
+ .id = UCLASS_RNG,
+ .of_match = sandbox_rng_match,
+ .ops = &sandbox_rng_ops,
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 6/7] configs: sandbox: Enable random number generator(rng) device
2019-12-05 8:42 [PATCH v2 0/7] Add a random number generator uclass Sughosh Ganu
` (4 preceding siblings ...)
2019-12-05 8:42 ` [PATCH v2 5/7] sandbox: rng: Add a random number generator(rng) driver Sughosh Ganu
@ 2019-12-05 8:42 ` Sughosh Ganu
2019-12-05 8:43 ` [PATCH v2 7/7] test: rng: Add basic test for random number generator(rng) uclass Sughosh Ganu
6 siblings, 0 replies; 9+ messages in thread
From: Sughosh Ganu @ 2019-12-05 8:42 UTC (permalink / raw)
To: u-boot
Enable support for random number generator on sandbox configs. This is
aimed primarily at adding unit test support for rng uclass.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
---
configs/sandbox64_defconfig | 2 ++
configs/sandbox_defconfig | 2 ++
2 files changed, 4 insertions(+)
diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
index d467841..2ef1097 100644
--- a/configs/sandbox64_defconfig
+++ b/configs/sandbox64_defconfig
@@ -158,6 +158,8 @@ CONFIG_REGULATOR_RK8XX=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_DM_REGULATOR_SANDBOX=y
CONFIG_REGULATOR_TPS65090=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_SANDBOX=y
CONFIG_DM_PWM=y
CONFIG_PWM_SANDBOX=y
CONFIG_RAM=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index ed7ff78..417d775 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -179,6 +179,8 @@ CONFIG_REGULATOR_RK8XX=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_DM_REGULATOR_SANDBOX=y
CONFIG_REGULATOR_TPS65090=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_SANDBOX=y
CONFIG_DM_PWM=y
CONFIG_PWM_SANDBOX=y
CONFIG_RAM=y
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 7/7] test: rng: Add basic test for random number generator(rng) uclass
2019-12-05 8:42 [PATCH v2 0/7] Add a random number generator uclass Sughosh Ganu
` (5 preceding siblings ...)
2019-12-05 8:42 ` [PATCH v2 6/7] configs: sandbox: Enable random number generator(rng) device Sughosh Ganu
@ 2019-12-05 8:43 ` Sughosh Ganu
6 siblings, 0 replies; 9+ messages in thread
From: Sughosh Ganu @ 2019-12-05 8:43 UTC (permalink / raw)
To: u-boot
Add a unit test for testing the rng uclass functionality using the
sandbox rng driver.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
---
test/dm/Makefile | 1 +
test/dm/rng.c | 26 ++++++++++++++++++++++++++
2 files changed, 27 insertions(+)
create mode 100644 test/dm/rng.c
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 0c2fd5c..f61bf65 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -65,4 +65,5 @@ obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o
obj-$(CONFIG_DMA) += dma.o
obj-$(CONFIG_DM_MDIO) += mdio.o
obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o
+obj-$(CONFIG_DM_RNG) += rng.o
endif
diff --git a/test/dm/rng.c b/test/dm/rng.c
new file mode 100644
index 0000000..879e80a
--- /dev/null
+++ b/test/dm/rng.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <rng.h>
+#include <dm/test.h>
+#include <test/ut.h>
+
+/* Basic test of the rng uclass */
+static int dm_test_rng_read(struct unit_test_state *uts)
+{
+ unsigned long val1 = 0, val2 = 0;
+ struct udevice *dev;
+
+ ut_assertok(uclass_get_device(UCLASS_RNG, 0, &dev));
+ ut_assertnonnull(dev);
+ dm_rng_read(dev, &val1, sizeof(val1));
+ dm_rng_read(dev, &val2, sizeof(val2));
+ ut_assert(val1 != val2);
+
+ return 0;
+}
+DM_TEST(dm_test_rng_read, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread